Back catalogue: All genres

Notes: UDG have further fine-tuned what was already a great design concept for a flight case into one especially for the most discerning DJ/producer. It is constructed from aluminium, thus providing an extremely stable structure with lighter weight compared to traditional flight cases. The inner sides are protected with pick & pluck foam that consists of two separate layers, each allowing the user to create individualized adapted compartments. The pick & pluck foam allow you to pluck out any desired shape you require for various-sized DJ-controllers and providing the additional option of creating another slot underneath the controller for laptop or cable storage. This pick & pluck foam creating an easy, do-it-yourself customized system of case interiors.

The UDG Ultimate Pick Foam Flight Cases are designed to keep your gear protected from accidental damage when you transport it to and from gigs. They're compact and lightweight yet tough enough to keep your gear safe.

Specifications

Colour: Black
Weight: 4,55 kg / 10.01 lbs
Outer Dimensions (W x H x D): 49 x 42.3 x 21 cm | 19.3 x 16.6 x 8.3 inch
Inner Dimensions (W x H x D): 48 x 41.3 x 20 cm | 18.9 x 16.2 x 7.9 inch
Material: Aluminium
Protection: Corrosion resistant aluminium profiles with strong rounded corners
Fully-lined with high density foam protective padding & foam on lid
Two side strong butterfly lock & solid metal hinges
Rubber feet at the bottom for support in standing

Extras

Lighter weight than traditional flight cases
Black Diamond finishing surface
Ergonomic & sturdy carry handle
Pick & pluck foam with two separate layers
Replacement pick & pluck foam is available to purchase
Rear cable access hole with cover

Fits:

Technics SL-1200MK7, SL-1200MK6, SL-1200 MK5, SL-1200 MK4, SL-1200 MK3, SL-1200 MK2, SL-1200GR, SL-1200GAE,
Denon VL12 Prime,
Pioneer PLX-1000, PLX-500
Reloop RP-8000 MK2, RP-8000 Straight, RP-8000, Reloop RP-1000M, RP-1000 MK2, RP-2000 MK2, RP-2000 USB MK2, RP-4000 MK2, RP-7000, RP-7000 MK2, RP-7000 MK2 GLD, RP-7000 MK2 Silver,
Audio Technica LP120-USB, LP120XUSB, LP1240-USBXP, LP1240-USB, LP140XP, LP3, LP5, LP7, LPW40WN,
Stanton STR8-150 M2, ST-150 M2, T.52, T.55 USB, T.62 M2, T.92 M2 USB,
Mixars STA, LTA,
Vestax PDX-3000, PDX-3000Mix, PDX-3000MKII,
Or similar sized turntables

Notes: Headband with three connection modes: W+ Link for wireless ultra-low latency and lossless audio, Bluetoothr 5.0, and cabled. Built-in microphone, includes USB-C charging cable.

Notes: The innoFADER PNP3 now offers you the best precision full bodied fader feel with some nice improvements to make your installation go much more smoothly. Utilising the same capacitance technology innoFADER is famous for to ensure maximum reliability and longevity.

The innoFADER PNP3 has an added feature which allows you to sharpen the cut point itself without the need to adjust the curve dial. This way you can optimize the Innofader PNP3 for both scratching and mixing.

Depth reduced from 45mm to 38mm
Durable, easy access Curve and Cut dials
No polarity testing required - plug in and go!
Fits Pioneer S series mixers (S3, S7, S9, S11)*1
Upgrade for Pioneer DDJ-1000 and DDJ-Rev7*1
LED shows cutting action and presents
Spare stem included

Notes: The Innofader Pro2 is the ultimate replacement audio fader. It gives you an ultra precise i 0.05mm cut-in accuracy for even tighter control of your scratches. Separate left and right cut controls make it easy to adjust without the need to recalibrate. And for the perfectionist in you, it even has super precise presets which allow you to do things like shift the cut point by a mere 0.04mm, less than even the thickness of your hair.

Thanks to the feedback of customers like yourself, the Pro2 now fits more mixers than ever, all without modification. The adapter boards are already insulated and marked clearly to show you the specific one you need for your mixer.

To take advantage of all of the Innofader Pro2 adjustability, we recommend you purchase an Innojuster. This allows you to access Innofader Pro2 control dials plus the calibration button from outside the mixer.

Notes: The mini Innofader Plus is the new upgrade part which will replace the mini Innofader PNP P. The cut point has 0.1mm precision combined with a lightning fast 1msec response time. And now you can hook it up to an innoJUSTER to ensure you get the hairline precision cut point exactly where you want it on the fly!

The installation process is now greatly simplified. Low profile connectors ensure that you do not have to worry about breaking any cables. The button is now easier to press. And the adjustments now can be done with simpler swipe movements.

Notes: Dual Moving Magnet Mono Cartridge for Shellac or Phonograph records

Model dedicated to 78 RPM records, whose round stylus has a large curvature radius at the tip. The curvature radius is 3 mil, and suitable for playing 78 RPM records from a wide variety of eras.

Audio-Technica's internationally-patented Dual Magnet design replicates the structure of the cutter head.

Instead of using a single, large magnet, the two magnets are arranged in the shape of a "V". The two magnets are positioned precisely to match the positions of the left and right channels in the stereo groove walls. Consequently, the VM design ensures outstanding channel separation, extended frequency response and superb tracking.

Para-toroidal generating system

Para-toroidal coils improve generating efficiency and offers superb linearity, since leakage of magnetic flux in this continuous and unitised magnetic circuit is low. Permeability of the cores is also optimised through the use of laminated cores.

Mono body

For monaural operation, left and right channels should be connected. A mono body on which left and right terminals are connected internally reduces record noise which is primarily in the vertical direction and obtains a highly focused 'centre' sound image compared with stereo bodies.

600 Series

Specialised 600 series mono body with internal wiring dedicated to monaural sound.

Conical Bonded (3mil) Stylus

A conical bonded stylus with a large curvature radius at the tip. The curvature radius is 3 mil, and suitable for playing 78 RPM records from a wide variety of eras.

Specifications

Cartridge & Stylus

Frequency Response: 20 - 20,000Hz
Vertical Tracking Angle: 23 degrees
Stylus Construction: Bonded Round Shank
Recommended Load Impedance: 47,000O
Coil Impedance: 1,400O (1kHz)
Output Voltage: 3.0mV (1kHz, 5cm/sec.)
Stylus Shape: Conical Bonded (3mil)
Cantilever: Aluminium Pipe
Static Compliance: 15 x 10-6 cm/dyne
Dynamic Compliance: 2.0 x 10-6 cm/dyne (100Hz)
Mounting: 1/2" centres
Dimensions: 17.3 (H) x 17.0 (W) x 28.2 (L) mm
Accessories Included: Cartridge installation screws 5mm ×2 and 10mm ×2, Washer ×2, Hexagon nut ×2
Recommended Load Capacitance: 100 - 200pF
Replacement Stylus: VMN70SP
Stylus Size: 3.0 mil
Type: VM Type
Weight: 6.4g

Notes: The Green3 uses a three piece OTL cantilever that has a Grado specific diamond mounted on a brass bushing.

What's the difference between Black3 and Green3?
Approximately 15% of the Black3 production run meet higher specifications. These are hand selected from the batch and designated as Green3.

Grado's OTL, or optimized transmission line, technology provides an ideal transfer of signal from the surface of the LP to the generator of the system. This technology rejects unwanted resonances and lowers distortion preserving the fundamental and harmonic frequencies of the music. This also helps keep noise generated by the motor system in the cartridge to a minimum.

Grado's OTL stylus/cantilever design makes records sound quieter, improves the height, width, and depth of the soundstage, and present more detail than previously obtainable.

The Green3 is hand assembled by Grado's team in Brooklyn, with some builders having over 25 years of experience. This updated series of cartridges offers excellent tonal balance, dynamics, and realism, for a most rewarding reproduction of vocals and instruments. The coil winding techniques using ultra high purity copper wire, which were honed during the development of the Lineage Series, have let the electrical circuits achieve unison between the four coils in each phono cartridge. This allows for a precise balance between channels and accurate stereo imaging.

As in all Grado phono cartridges the Green3 is powered by a twin magnet system that optimizes the balance between stereo channels. All internal magnetic circuit parts are held to extremely high tolerances creating the desired stereo imaging. Grado's patented Flux-Bridger design allows the Green2 to have one of the lowest effective moving mass generating systems while creating an excellent balance throughout the full frequency range.

Notes: There are many analogue lovers with record collections that include mono albums. Grado strive to have products that will fit all the needs of the analogue enthusiast. So now, Grado offers two new cartridge models in a mono version. The MC+ and the ME+ are mounted with an elliciptical diamond. The ME+ uses one of GRADO's upgraded generating systems. All wooden body cartridges are available in mono version. This will make your records quieter and enhance the musical pleasure of these recordings.

Frequency Response: 10-55,000 Hz
Principal: MI
Input Load: 47K
Output at 1KHz 5CM/sec.: 5mV
Recommended Tracking Force: 1.5
Stylus Type: E
Inductance: 45mH
Resistance: 475
Stylus Replacement: U
Mounting: S/P
Weight: 5.5

Notes: Everyone loves bass, so Minirig decided to take the Subwoofer to the next step - rather than the old 30 watts of power, it now has 40 watts of power! This ultimately gives you a cleaner low that matches the new Minirig 3.

Don't just hear the bass - feel the bass:

The Subwoofer works in harmony with your Minirig or Minirig Mini to enhance the low end.

Optimised Airflow Technology:

With Minirig's custom folded horn design you get bone shaking bass, in a small package.

Take the party on the road:

Chuck this little bass bin in your rucksack and complete your Minirig soundsystem set-up.

Notes: Nagaoka MP-110 the successor to the highly acclaimed and classic Nagaoka MP11 phono cartridge, the new Nagaoka MP-110 phono cartridge extends and strengthens its predecessor's prowess and talents to a new level of radiance. You'll hear more music, more detailed refinement to enjoy and savor. The Nagaoka MP-110 is the cartridge to start with and to keep for a long time.

Features:
-Superfine polished eliptical diamond bonded stylus
-Powerfull samarium cobalt magnet
-Lightweight aluminum alloy cantilever for high fidelity
-Carbon fibre reinforced plastic shoe
-Anti ferro magnetic permalloy shield casing

Stylus replacement: Nagaoka JN-P110

The stylus replacement interval varies depending on the using conditions. But for general use at home, the reference time is between 150-200 hours in which the stylus begin to wear and the tone quality deteriorates. Recommend replacing the stylus as aerly as possible to enjoy clear tone for a long time and not to damge the disc grooves.

Notes: The Sumiko Pearl is a truly unique and precious find within the sea of entry-level phono cartridges. With decades of accolades to its name, the Pearl's smooth, natural sound reproduction breathes life into any recording with poise and transparency. Its diminutive price also belies its colossal ability to pull a complete sonic picture from each record it touches.

Rounding off the budget series with style and aplomb, the Pearl is an affordable audiophile marvel that's sure to delight.

Frequency Response:: 12Hz - 30kHz
Output Voltage: 4.0mV
Load Impedance: 47kO
Channel Seperation: 3dB @ 1kHz
Channel Balance: <0.5dB@ 1kHz
Stylus Type: Elliptical
Compliance: 12x10-6 cm/dyn
Tracking Force Range: 1.5 - 2.0g
Recommended Force: 2.0g
Cartridge Weight: 6.0g

Notes: Goldring D06 stylus is designed to fit the current Goldring 1006 phono cartridge, a direct replacement when your stylus is worn - saving the cost of buying a whole new cartridge. Goldring cartridges generally last many hours until the stylus needs replacing. An indication of wear is a "duller" sound.

Notes: 'Nude' super-elliptical stylus of just 7.6 x 18 microns (0.3 x 0.7 mil), cut and polished from a single homogeneous piece of diamond. This makes for a lower effective tip mass of improved rigidity, which in turn means its ability to retrieve high-frequency detail is dramatically improved when compared to the 'bonded' elliptical stylus alternative. It's far less likely to 'mis-track' or overshoot when tracing high-frequency groove modulations, and because of its finely polished 7.6-micron profile it can more effectively fit into closely packed inner grooves. Lowerdistortion, improved transient response and a flat frequency response all contribute to superior fidelity when compared to any price-comparable alternative.

Technical specifications

Frequency Range 20 Hz - 20 kHz
Channel Balance < 1.5 dB @ 1 kHz
Channel Separation > 20 dB @ 1 kHz
Sensitivity 3.5 mV (1 kHz @ 5 cm/s)
Static Compliance 20 mm/N
Vertical Tracking Angle 20-
Stylus Radius 7.6 micron (0.3 x 0.7 mil)
Stylus Type Nude eliptical
Load Resistance 47 kO
Load Capacitance 100- 200 pF
Internal Inductance 400 mH
Internal Resistance 410 O
Cartridge Mass 6.9 g
Fixing Centre 12.7 mm (0.5 in)
Playing Weight 1.5 - 2.5 g (1.75 g recommended)

Notes: All Prestige series styli are compatible; any of these styli will work in any Prestige body. All the Styli; Green, Black, Red, Blue & Silver Styli. The performance difference translates into real sonic improvements; as you move up the Prestige line, the sound becomes smoother, more open and more detailed.

Genuine replacement styli for all Grado Prestige cartridges including black, green, blue, red, silver and gold

A worn stylus can cause serious (irreversible) damage to your records, and provide poor sound quality

Notes: All Prestige series styli are compatible; any of these styli will work in any Prestige body. All the Styli; Green, Black, Red, Blue & Silver Styli. The performance difference translates into real sonic improvements; as you move up the Prestige line, the sound becomes smoother, more open and more detailed.

Genuine replacement styli for all Grado Prestige cartridges including black, green, blue, red, silver and gold

A worn stylus can cause serious (irreversible) damage to your records, and provide poor sound quality