Back catalogue: All genres

Notes: The Grado Prestige 78E is designed to be used with 78 records, a high output cartridge with excellent stability under even severe use, featuring modified four piece OTL cantilever technology, oxygen free wire in the coils and a specially designed, high polished, conical/spherical 3mm diamond mounted in a brass bushing. This cartridge can be used for either archival or casual play without concern for undue wear on the record.

Grado 78 cartridges have a considerable reduction in tip mass resulting in extended frequency response while tracking forces can range from 2-5 grams. The experts acclaim these cartridges as virtually the finest 78-rpm cartridges in the world.

Tech Specs

Frequency Response: 10-50
Principal: MI
Input Load: 47K
Output at 1KHz 5CM/sec: 5mV
Recommended Tracking Force: 2-5g
Inductance: 45mH
Resistance: 475
Stylus: replaceable
Mounting: standard
Weight: 5.5g

Product features
Colour: black
Type of stylus: elliptical
Type of turntable component: needle

Notes: Replacement stylus for the Grado Prestige MC+ Mono cartridge.

Notes: Grado Prestige ME+ Mono Phono Cartridge uses a modified four piece OTL cantilever technology, oxygen free wire in the coils and a specially designed, high polished, elliptical diamond mounted in a brass bushing, made for analogue lovers with record collections that include mono albums.

Prestige Series

The Prestige series of cartridges are designed for high output and excellent stability under severe use. A considerable tip mass reduction results in a frequency response to 50 kHz and beyond and tracking forces from 1-2 grams. They are acclaimed by experts as virtually the finest pickups in the world at their price. All styli in the Prestige series are user replaceable.

Mono Cartridge

Grado strives to deliver products that will fit all the needs of the analogue enthusiast. To this end, Grado offers two new cartridge models in a mono version. The ME+, like the MC+, is mounted with an elliptical diamond.

Optimised Transmission Line

Prestige model ME+ uses a modified four piece OTL cantilever technology, oxygen free wire in the coils and a specially designed, high polished, elliptical diamond mounted in a brass bushing. This provides an ideal transfer of the signal from point to point, stylus to cantilever to magnet to coils, etc achieved by eliminating resonance at each of these key junctions. The transmission line cantilever consists of separate sections that are telescoped into each other.

All sections are made of different alloys, some sections hollow, other sections solid. These sections are bonded together with materials that act as dampers and are coated with a black proprietary material which controls and absorbs resonances that travel on the surface of the cantilever. The OTL stylus/cantilever design will make your records sound quieter, improve the height, width, and depth of the soundstage and offer more detail than previously obtainable.

Pivoted-Fixed Axial

This design feature is basically quite simple. The "OTL" cantilever shaft is brought to a fixed axial pivot that supports the entire cantilever assembly. A miniature element attached to the end of the cantilever is allowed to move freely within the lines of flux of a stationary magnet and coil structure.

This system of support is mechanically more accurate (more linear) than conventional "teeter-totter" designs that utilize an iron armature to balance the mass of the cantilever. The teeter-totter design is supported in the centre with a rubber doughnut mounting. The fixed axial design has a very low tip mass, which results in lower distortion, improved transient response, and longer record life.

Flux-Bridger Generator

The Flux-Bridger design uses four separate magnetic gaps that the miniature element of the cantilever bridges. The miniature element moves between opposing flux gaps creating an increase in flux in one gap while reducing it in the other. The four separate magnetic gaps create a highly efficient and perfectly balanced system. This design requires fewer coil turns than conventional designs.

100% Quality Control

The ME+ uses one of Grado's upgraded generating systems. All wooden body cartridges are available in mono version. Each individual cartridge manufactured by Grado is hand assembled and tested for frequency response, channel output, channel balance, phase linearity, inductance and resistance. This meticulous care in design and construction lavished on each Grado cartridge contributes to an unchallenged consistency of performance and guarantee of reliability.

Tech Specs

Freq Response: 10-50
Principal: Moving Iron
Input Load: 47K
Output 5cm/s: 5mV @1KHz
Recommend Track Force: 1.5
Stylus Type: Elliptical
Inductance: 45mH
Resistance: 475
Stylus Replacement: U
Mounting: S/P
-Weight: 5.5g

Notes: Grado Prestige Blue 3 Stylus Replacement

All Prestige series styli are compatible; any of these styli will work in any Prestige body. All the Styli . Green , Black ,. Red Blue & Silver Styli. The performance difference translates into real sonic improvements; as you move up the Prestige line, the sound becomes smoother, more open and more detailed.

Genuine replacement styli for all Grado Prestige cartridges including black, green, blue, red, silver and gold.

A worn stylus can cause serious (irreversible) damage to your records, and provide poor sound quality.

Notes: All Prestige series styli are compatible; any of these styli will work in any Prestige body. All the Styli; Green, Black, Red, Blue & Silver Styli. The performance difference translates into real sonic improvements; as you move up the Prestige line, the sound becomes smoother, more open and more detailed.

Genuine replacement styli for all Grado Prestige cartridges including black, green, blue, red, silver and gold

A worn stylus can cause serious (irreversible) damage to your records, and provide poor sound quality

Notes: All Prestige series styli are compatible; any of these styli will work in any Prestige body. All the Styli; Green, Black, Red, Blue & Silver Styli. The performance difference translates into real sonic improvements; as you move up the Prestige line, the sound becomes smoother, more open and more detailed.

Genuine replacement styli for all Grado Prestige cartridges including black, green, blue, red, silver and gold

A worn stylus can cause serious (irreversible) damage to your records, and provide poor sound quality

Notes: Even if you use your GrooveWasher to clean your records, room dust, lint and cat hair can accumulate on your stylus. Your stylus will "plow" out any debris that isn't removed from a record cleaning.

We sourced and tested dozens of brush styles, handle types and bristles. Straight "pencil" brushes. Artist camel hair brushes. Toothbrush styles. Mascara brushes.

We preferred a 90 degree angle. Long bristles so the brush can clean the underside of the cartridge as well as the stylus. Dense bristles to pull off gunky coatings but soft to avoid damage to the stylus or cantilever. Those are the effective cleaning features of our new stylus brush. This brush can be used dry or with a couple of drops of SC1 Fluid.

This kit includes our SC1 Stylus Fluid. It's a cousin of our G2 Fluid with a bit more organic alcohol. The stylus can become clogged with oily pressing release compound from new records and residue from other record cleaning and preservative fluids. SC1 Stylus Fluid dissolves these contaminants and the SC1 Brush removes them.

Note: Hard surface cleaning fluids like G2 and SC1 can be irritating to skin and eyes. Avoid contact with your eyes. Flush with clean water. Keep all cleaning products out of the reach of children.

Notes: A popular replacement stylus. Individually packed in a plastic case. Made in Japan.

Notes: A popular replacement stylus. Individually packed in a plastic case. Made in Japan.

Notes: A popular replacement stylus. Individually packed in a plastic case. Made in Japan.

Notes: A popular replacement stylus. Individually packed in a plastic case. Made in Japan.

Notes: A popular replacement stylus. Individually packed in a plastic case. Made in Japan.

Notes: A popular replacement stylus. Individually packed in a plastic case. Made in Japan.

Notes: A popular replacement stylus. Individually packed in a plastic case. Made in Japan.

Notes: Mobility Fidelity Sound Lab's Geo-Disc is the perfect complement to its series of limited edition original master recordings. Both will markedly improve the sonic performance of your stereo playback system. The high fidelity pleasures of original master recordings, even the audio content of conventional records, cannot be totally realized in your phonograph pickup apparatus (stylus/cartridge) if it is not aligned accurately. This is where the Geo-Disc is essential.

With extensive research and development, the Geo-Disc features a proprietary 3D visual system that delivers incredibly precise, uncomplicated, rapid and economical cartridge alignment. Mobile Fidelity's Geo-Disc is an LP sized platter that provides a very accurate spot for adjusting the cartridge overhang, and has visual gridlines for properly adjusting the offset angles. It's a lot easier to use than those flimsy plastic templates or paper cutouts that come with a lot of turntables. Just fit the disc on your platter and align using the simple printed graph based on the Baerwald alignment curve.

Notes: Replacement JNP100 stylus with spherical tip and aluminium alloy cantilever.

Fits MP100 cartridge.

Notes: Replacement JNP110 stylus with elliptical stylus and aluminium alloy cantilever.

Fits MP110 cartridge.

Notes: Replacement stylus Nagaoka MP-150

JN-P150, Tonar article 6823

Cantilever: hardened tapered aluminum alloy

Stylus: 0.4 x 0.7

Mil naked elliptical block diamond stylus tip

Notes: Nagaoka JNP-200 Replacement Stylus is the original replacement stylus for the MP-200 MM cartridge featuring an elliptical block diamond tip and boron cantilever.

Replace a worn out or defective stylus to prevent damage to your records, and enjoy the best from your records again with more musical information being extracted from the vinyl grooves, allowing you to enjoy the best sound quality.

Tech Specs

Cantilever: Boron

Stylus: 0.4 x 0.7 Mil naked elliptical block diamond stylus tip

Notes: Part of the Nagaoka range of replacement turntable drive belts. All types have a flat cross-section and are 5mm wide.

Diameter: 27cm
Circumference: 54cm

Notes: Part of the Nagaoka range of replacement turntable drive belts. All types have a flat cross-section and are 5mm wide.

Diameter: 29cm. Circumference: 58cm

Notes: Part of the Nagaoka range of replacement turntable drive belts. All types have a flat cross-section and are 5mm wide.

Diameter: 31cm
Circumference: 62cm

Notes: Part of the Nagaoka range of replacement turntable drive belts. All types have a flat cross-section and are 5mm wide.

Diameter: 32cm.
Circumference: 64cm

Notes: Part of the Nagaoka range of replacement turntable drive belts. All types have a flat cross-section and are 5mm wide.

Diameter: 36cm.
Circumference: 72cm

Notes: Carbon fibre anti static stylus cleaning brush from Pro-Ject for getting dust and debris off of your stylus.

Notes: Sound tuning through platter mat replacement! The interaction between the record and the surface can be tracked very easily by the sensitivity of a good pick up cartridge.

Common felt mats give a smooth contact between record and platter but have the disadvantage of static. This means that felt mats often collect a lot of dust which can be then transferred to the record. Also, the damping ability is very limited which can be a problem with metal platters. Thick rubber mats overdamp the record and have an isolation effect which leaves static on the record - hearable noise clicks are the result.

Leather and Cork are 2 different but very interesting options to upgrade the sound quality. Resonances are damped more effectively than felt, they keep dust away and also avoid static.

Which is better largely depends on taste and the actual platter design. These mats are a very cost effective way to improve the sound and have less noise by static and dust. You can hear a difference!

Notes: Further your unwanted vibration protection with the Leather It mat for your turntable. By topping your platter with a leather mat errant vibrations are stopped in their tracks and, thanks to a high-friction surface, there is minimal record slip.

The Pro-Ject Leather it turntable mat has been designed to enhance the sound of your turntable. Sized to sit on a 12" platter, the Leather it offers a better playback surface than other felt or cork alternatives.

The mat improves performance by reducing vibration transfer to the playing surface, allowing your cartridge to deliver a more stable high-fidelity performance. The high-friction but smooth surface also allows for fluid record rotation with minimal slip, resulting in pin-point timing during playback.

Notes: Further your unwanted vibration protection with the Leather It mat for your turntable. By topping your platter with a leather mat errant vibrations are stopped in their tracks and, thanks to a high-friction surface, there is minimal record slip.

The Pro-Ject Leather it turntable mat has been designed to enhance the sound of your turntable. Sized to sit on a 12" platter, the Leather it offers a better playback surface than other felt or cork alternatives.

The mat improves performance by reducing vibration transfer to the playing surface, allowing your cartridge to deliver a more stable high-fidelity performance. The high-friction but smooth surface also allows for fluid record rotation with minimal slip, resulting in pin-point timing during playback.

Notes: Formerly known as Grease-IT, this platter bearing oil is a high-tech lubricant, allowing for drastically reduced friction around the main bearing. Now your turntable can spin at a constant velocity, improving its performance.

All you need is a couple of drops, and the performance will be solid for years to come.

Volume: 5ml

Notes: This new record puck ensures a secure fit between record and turntable. With the two different finishes, black painted and polished silver, it perfectly fits the design of of our turntables. Record pucks use weight to secure a playing vinyl record against the turntable platter. By holding the two together, the sound performance of the turntable will improve, in timing and depth of sound. With a weight of 190 grams, this puck is perfect for smaller turntables in order not to burden the turntable bearing and to prevent an increase in rumbling.

Check the spindle height: The spindle height with applied record shall not exceed 10.5mm!

Features

Ensures a firm fit of the record
Reduces unwanted vibrations
Optimizes playback of warped records
Felt mat on the underside to protect the label
Sound improvement for all turntables

Technical Specifications

Material: Aluminium (black painted or polished)
Weight: 190g
Diameter: 78mm
Height: 16mm

Notes: Reduces unwanted resonances & improves playback of warped records. The label is protected by the felt pad on the underside.

Optimised playback of your records

This Record Puck PRO ensures a firm fit between the record and the turntable. Record pucks use weight to secure a record against the turntable. This improves the sound performance of the turntable in terms of timing and sound depth.

Technical Specifications

Material: Nickel-plated aluminium
Weight: 190g
Diameter: 78mm
Height: 16mm

Notes: A popular replacement stylus. Individually packed in a plastic case. Made in Japan.

Notes: A popular replacement stylus. Individually packed in a plastic case. Made in Japan.

Notes: Replacement Styli for 22-155 (IDN-155 E) Black (Dual) I, Ellip Tip

A popular replacement stylus. Individually packed in a plastic case. Made in Japan.

Colour: Black
Product Dimensions (mm): 11x20x10
Net weight (kg): 0.01

Notes: Good quality replacement stylus for the classic Pickering V-15 cartridge, as found on a number of hi-fi turntables. Simply slide out your worn stylus and push in the new one.

Supplier's notes:
Replacement Styli for 31-2A D1507, Red (Pickering) Conical Tip

A popular replacement stylus. Individually packed in a plastic case. Made in Japan.

Colour: Red
Product Dimensions (mm): 11x20x10
Net weight (kg): 0.01

Notes: Replacement Styli for 33-15XE (NF-15XE), Yellow (Ortofon) Ellip Tip

A popular replacement stylus. Individually packed in a plastic case. Made in Japan.

Colour: Yellow
Product Dimensions (mm): 11x20x10
Net weight (kg): 0.01

Notes: A popular replacement stylus. Individually packed in a plastic case. Made in Japan.

Colour: White
Product Dimensions (mm): 11x20x10
Net weight (kg): 0.01
Gross Weight (kg): 0.013
Packaged dimensions (HxWxL mm): 20x50x20
Transport dimensions (mm): 50x20x20
Gross Weight (Packaged) (kg): 0.013

Notes: A popular replacement stylus. Individually packed in a plastic case. Made in Japan.

Colour: Beige
Product Dimensions (mm): 11x20x10
Net weight (kg): 0.01
Transport dimensions (mm): 50x20x20
Gross Weight (Packaged) (kg): 0.013

Notes: A popular replacement stylus. Individually packed in a plastic case. Made in Japan.

Colour: Yellow
Product Dimensions (mm): 11x20x10
Net weight (kg): 0.01
Gross Weight (kg): 0.013
Packaged dimensions (HxWxL mm): 20x50x20
Transport dimensions (mm): 50x20x20
Gross Weight (Packaged) (kg) : 0.013

Notes: A popular replacement stylus. Individually packed in a plastic case. Made in Japan.

Colour: Black
Product Dimensions (mm): 11x20x10
Net weight (kg): 0.01
Gross Weight (kg): 0.03
Packaged dimensions (HxWxL mm): 20x50x20
Transport dimensions (mm): 50x20x20
Gross Weight (Packaged) (kg) : 0.03

Notes: Replacement Styli for 36-92F (N-92F) I Ellip Tip (Shure Type) Red

A popular replacement stylus. Individually packed in a plastic case. Made in Japan.

Colour: Red
Product Dimensions (mm): 11x20x10
Net weight (kg): 0.01

Notes: A popular replacement stylus. Individually packed in a plastic case. Made in Japan

Colour: Black
Product Dimensions (mm): 11x20x10
Net weight (kg): 0.01
Gross Weight (kg): 0.03
Packaged dimensions (HxWxL mm): 20x50x20
Transport dimensions (mm): 50x20x20
Gross Weight (Packaged) (kg) : 0.03

Notes: A popular replacement stylus. Individually packed in a plastic case. Made in Japan

Colour: Blue
Product Dimensions (mm): 11x20x10
Net weight (kg): 0.01
Gross Weight (kg): 0.03
Packaged dimensions (HxWxL mm): 20x50x20
Transport dimensions (mm): 50x20x20
Gross Weight (Packaged) (kg) : 0.03

Notes: Deluxe stroboscopic disc - 30cm diameter. Speeds: 8 1/3, 16 2/3, 33 1/3, 45, 78 RPM.

Notes: Original Tonar Elliptical Bonded Diamond Stylus for Tonar Birdie cartridge. Suitable for Pro / DJ use.

Notes: During the past 20 years the quality of record players and vinyl records have improved dramatically. Acoustic feedback is one of the big problems when playing records. The cause is the sound that has just been produced by the speakers which comes back to the record player and cause it to vibrate. The problems is that there is a very slight time difference between the reproduced sound and the sound that is fed back onto the record player. This results in a big loss of detail and clarity and makes the sound "muddy". So every effort has to be done to isolate the record player from its surroundings as well as to isolate the record from the record player.

In order to reduce acoustic feedback from the surroundings back to the record and the cartridge a lot of effort has gone into developing turntable mats that make the reproduced sound crystal clear with great separation and detail. This has been done by experimenting with various materials which absorb unwanted vibrations which were not present in the original recording. Now many people are trying to combine these different materials as a sandwich at the same time in order to reach better results. Now Tonar offers you this opportunity to experiment yourself but at modest pricing.

In order to enhance the better contact between the record and the mat, the center part - with the dimensions of the label have been recessed to accommodate the thicker label part.

- Diameter 295 mm.
- Thickness 3 mm.

Notes: Replacement 3600 C Flip stylus with conical tip and carbon cantilever

Notes: This cartridge alignment protector allows the proper setting of the cartridge offset and overhang

Notes: Clean tip carbon fiber stylus cleaner

Notes: During the past 20 years the quality of record players and vinyl records have improved dramatically.
Acoustic feedback is one of the big problems when playing records. The cause is the sound that has just been produced by the speakers which comes back to the record player and cause it to vibrate. The problems is that there is a very slight time difference between the reproduced sound and the sound that is fed back onto the record player. This results in a big loss of detail and clarity and makes the sound "muddy". So every effort has to be done to isolate the record player from its surroundings as well as to isolate the record from the record player.

In order to reduce acoustic feedback from the surroundings back to the record and the cartridge a lot of effort has gone into developing turntable mats that make the reproduced sound crystal clear with great separation and detail. This has been done by experimenting with various materials which absorb unwanted vibrations which were not present in the original recording. Now many people are trying to combine these different materials as a sandwich at the same time in order to reach better results. Now Tonar offers you this opportunity to experiment yourself but at modest pricing.

In order to enhance the better contact between the record and the mat, the center part - with the dimensions of the label have been recessed to accommodate the thicker label part.

- Diameter 295 mm
- Thickness 3 mm