All genres charts

Notes: These are the same high-quality inner sleeves that MOFI use for their most-prized vinyl releases. They are imported, three-ply, anti-static, premium sleeves (similar to rice paper) and work with both LPs and laser discs.

Back construction consists of a paper layer sandwiched between two sheets of high-density polyethylene (HDPE) with a translucent HDPE front.

These custom-designed inner sleeves protect against all common problems associated with regular sleeves of all types, such as scratching, static build-up and contamination etc.

Your records are irreplaceable, these sleeves will guarantee they last a lifetime.

Notes: G-Sonic is a special ultrasonic wash formula that offers a more pure and focused blend of additives than can be commonly obtained off the shelf. The result is greater groove penetration for a superior ultrasonic cleaning.

Add ten drops of G-Sonic concentrate to each gallon of distilled water. Replace the cap and shake for at least five seconds to mix. Add the mixed solution to your ultrasonic tank and proceed to clean your vinyl records per your desired methodology. A one ounce bottle of G-Sonic will make up to 60 gallons of ultrasonic bath.

HumminGuru Users: One drop of G-Sonic added to the bath tank, after it is filled, will break the water's surface tension for improved cleaning. G-Sonic is a gentle surfactant and emulsifier blend.

Notes: Widely hailed as the best product of its kind, Mobile Fidelity Sound Lab's Archival Record Sleeves are "clearly" superior. These sturdy, 4-mil thick outer sleeves are made from polypropylene, which makes them more transparent than polyethylene sleeves. Besides providing rock-solid protection from dust, hair, and other debris, these sleeves allow you to enjoy eye-popping album graphics with more clarity.

The 4-mil thickness affords stellar archival safekeeping, providing protection against scuffs, wear, denting, dirt, and the moisture that can travel on fingertips. Consistently using these sleeves throughout your collection ensures easy access to LPs on shelves or racks. The sleeves are sized just large enough to provide a close fit while allowing enough room to accommodate gatefold jackets. These sleeves are an absolute necessity for anyone who cares about their vinyl collection. Each pack contains 50 outer sleeves.

Put a MoFi outer sleeve on your favorite LP cover, and you'll never be tempted to remove it. The jacket will remain safe, and you'll be able to see the artwork and text clearly. Whether a jacket is in mint condition or slightly worn, this protective outer sleeve will prevent deteriorations in quality. Housing your LP jackets in these strong sleeves provides peace of mind that disasters can be averted - especially those involving pets or any type of airborne debris.

Notes: Paper sleeves leave dust on the record and poly ethylene sleeves cling to the record. When removing the record from the sleeve, the poly ethylene generates a static charge which attracts the sleeve to the record and causes the dust caught between the sleeve and the record to scratch the record. The world famous Nagaoka Discfile no: 102 is anti-static and super slippery thus leaving the record completely unharmed.

Sold in packs of 50 sleeves

Notes: The one accessory every vinyl lover needs

For less than the cost of a new record, improve the sound and condition of your vinyl with the MoFi Anti-Static Record Brush. Simple and effective, it safely rids dust, debris, hair, and other contaminants from your LPs - letting you hear more detail, information, presence, and surface quiet during playback. Simply position the brush over an LP and let the tiny fiber bristles go to work in the grooves. Yes, it's that easy to eliminate ticks, pops, and other annoyances from your records. To clean the brush, simply rotate the handle. The Anti-Static Record Brush also works on LCD screens, keyboards, and other sensitive devices.
What makes it special


Unlike other brushes, the MoFi Anti-Static Record Brush features an optimized electrical path between the carbon-fiber bristles and handle that carries all the way through the conductive metal contacts strategically placed on the handle. The handle itself fosters proper electrical connection to your hand - which serves as the ground for static electricity.

Notes: Master protection: You worked hard to collect it, kept it safe and look forward to each moment you get to listen to it. Now, keep your tunes scratch-free for the next 30+ years like good collectors do with Big Fudge Premium Master Inner Record Sleeves.

Increase their value: Are you sitting on a rare album? Is it still inside its paper cover, or polyprop bag?! Why not protect their value a little more, by going "next level" and use the same accessories recommended by pro collectors.

Static reducing inners: Big Fudge Premium inner vinyl sleeves feature protective 3-Ply Polyethylene on one side and Archival Rice Paper on the other. The negative ion technology reduces friction and repels dust for "long play" protection.

Fits like a glove: Premium Master inner LP record sleeves (set of 50) are an exact 12" square..

Notes: Knurlies are the first screws specially designed for Eurorack - engineered with love by Befaco to make re-arranging your case a matter of minutes!

Knurlies can be fastened by hand, phillips, slot or allen, and include plastic washers to avoid rack-rash.

These screws are M3x7mm, so they can also be used on 3mm thick panels as well as regular 2mm ones.

Notes: The replacement kit includes 2 pairs of rotation wheels, 5 pcs of the air filter and 5 pcs of water filter.

Inside The Package:

Rotation Wheel x 2 sets
Air filters x 5 pcs
Water filters x 5 pcs
EVA stickers x 2 pcs

Notes: The premium dust cover is specifically designed for the HG01 HumminGuru Ultrasonic Vinyl Record Cleaner to provide protection and enhance the aesthetic of your equipment. Another design feature of this protective dust cover is the front pocket where the user can easily place and store the 7"/10" record adapters, the maintenance tool, and the manual Instruction. Now, everything is in one place!

Material: Waterproof polyester twill fabric with soft backing.

Notes: 200-capacity 7" record box with aluminium frame, hinged lid, egg-foam/EVA lining and supporting feet.

Notes: STOKYO has created the perfect Cartridge case based off of input from some of the top Professional DJ's from around the world. Holds up to 2 cartridges of both concorde and regular headshells comes with a secret store away compartment for extra stylus or other accessories.

Now available in Glow in the Dark.

Features:

Black with White Stokyo Logo
Limited Edition
Compact case
Designed to carry 2 cartridges.
Fits all cartridges, whether, Technics, Shure, Ortofon, Stanton, Numark and many more.
Special "Secret Stash" compartment, for extra stylus, screws, screwdrivers, cleaning etc
Weight: 120g

Notes: 12" Vinyl Keepers

Our very own high quality 450g Clear Polythene Record Sleeves We manufacture these right here in our own factory to ensure that they meet our strict quality standards.

Our Bags Feature:

High Clarity Film.

Antistatic Material.

UV Inhibitors to stop them breaking down in the sun.

Heavy Gauge (450g) for durability.

The Best Protection - For Your Collection!!!

Cover Size: 325mm x 325mm

Notes: The elegance and luxury feel of real American hardwood that cannot be matched. GrooveWasher's handcrafted Walnut Record Cleaning Kit cleans your vinyl records with beauty, style and ease.

This bundle includes:

Solid milled 5 inch American Walnut handle with a hand rubbed waterproof oil polyurethane finish
Replaceable Microfiber Cleaning Pad. Easy removal for cleaning or replacement.
G2 Record Cleaning Fluid Mist Spray (4 oz)
Record Label Protector Mask

"I have been using this cleaner since it was released...the results are amazing! This is a must for any record collector and would recommend this to anyone looking for the best way to clean their vinyl records! GrooveWasher...or nothing for me!" Christopher Burns

"Hands down, the best record cleaner on the market." Levi E.

"If you enjoy music from a physical medium, you must take care of it." Alex Chase

GrooveWasher Solid Walnut Wood Handle Design

The GrooveWasher walnut handle is milled from a single solid piece of midwest premium American Black Walnut, hand finished by wood artisans with waterproof oil polyurethane in Groovewasher's plant in Kansas City, Missouri, USA. Feel the woodgrain!

NOTE: Every one of Groovewasher's walnut products is unique. Some may have small surface cracks, splits or knots. This is the character of the wood, not a craftsman's mistake.

G2 Record Cleaning Fluid

The GrooveWasher G2 Record Cleaning Fluid is the result of years of research and testing. The selection of ingredients was guided by the formulations of the D series fluids of the 1970s. G2 Fluid is designed for maximum cleaning effectiveness of the delicate vinyl surface and microgroove, without the need for rinsing. Anti-static action on contact. Honest cleaning to release the honest sound of the recording.

High Tech G2 Fluid Contains:

Surfactants: State of the art detergents dissolve and suspend fingerprints and other oily grime.
Super wetting agent: A specialty chemical that reduces the G2 Fluid's surface tension to reach the bottom of the groove. When you spray G2 Fluid on a record you can see it spread down the grooves.
Emulsifiers: Holds the oils, dirt, mildew and microdust particles in suspension. Then the microfiber fabric cleaning pad wipes and pulls the dirt-filled solution from the record surface.
Laboratory grade, double deionized, carbon filtered & UV treated water: Carrier for the active cleaning ingredients. Eliminates static electric charges on the record's surface on contact.

Replaceable Cleaning Pad Design

The GrooveWasher replaceable microfiber cleaning pad features a super absorbent black terry style split microfiber cover. (Other replacement pad styles are available for separate purchase.) This fabric is effective in removing the contaminants borne in the G2 Fluid from the record's microgroove.

The pad is secured to the walnut handle with low profile hook & loop velcro. This allows the pad to be removed from the walnut handle to be washed or replaced. These cleaning pads are hand made by Groovewasher's textile artists in Kansas City.

Notes: Alternative stylus for Shure Whitelabel. Fits perfectly and plays perfectly. Diamond stereo needle tip.

Notes: Tonar 6364DS replacement stylus for Stanton N-500 and 500-V3 cartridges.

Notes: The 7-inch record adaptor for the HumminGuru Ultrasonic Vinyl Record Cleaner. It can hold up the vinyl record that is 2mm in thickness.

Inside The Package:

7" record adaptors
5 rubber stoppers
Manual Instruction

Notes: The 10-inch record adaptor for the HumminGuru Ultrasonic Vinyl Record Cleaner. It can hold up the vinyl record that is 2mm in thickness.

Inside The Package:

10" record adaptors
5 rubber stoppers
Manual Instruction

Notes: A good quality Euro style album record case. The product features lift off hinges and a butterfly catch. Holds 70 records

Notes: Order this bottle to refill the G2 Fluid 2 ounce and 4 ounce mist spray bottles.

One 32 ounce bottle of G2 Fluid with spout top. Use to refill the 2 ounce or 4 oz mist spray bottles.

High Tech G2 Fluid Contains:

G2 Fluid Contains:

Surfactants: State of the art detergents dissolve and suspend fingerprints and other oily grime.

Super wetting agent: A specialty chemical that reduces the G2 Fluid's surface tension to reach the bottom of the groove. When you spray G2 Fluid on a record you can see it spread down the grooves.

Emulsifiers: Holds the oils, dirt, mildew and microdust particles in suspension. Then the microfiber fabric cleaning pad wipes and pulls the dirt-filled solution from the record surface.

Laboratory grade, double deionized, carbon filtered & UV treated water: Carrier for the active cleaning ingredients. Eliminates static electric charges on the record's surface on contact.

"This refill is one of the essential parts of the GroveWasher product that simply works great. Gently cleans the record surface lifting out all the accumulated dirt and grime with ease." Richard Villanova

Designed and handcrafted by GrooveWasher in North Kansas City, MO, USA.

Notes: The new CTRL Case SP-404 MK2 is custom designed to fit the Roland SP-404 MK2 sampler and other models such as SP-404, SP-404SX or SP-404A. Crafted from rigid Durashock molded EVA shell and a high-density foam interior it is furthermore equipped with a mesh compartment to store audio cables and a power adapter.

Fits:

Roland SP-404MKII
Roland SP-404SX
Roland SP-404A
Soundswitch Control One

Specs:

Outer measures: 33 x 19 x 8 cm
Inner measures: 32 x 17 x 7 cm
Weight: 0,45 kg

Notes: There are many options when it comes to outer sleeves these days. These are the everyday workhorse of outer sleeves that will protect your album jackets at a reasonable price. 12.75" x 12.75", 3 Mil, polyethylene that will cover both single and double LP gatefold jackets. If you're looking for outer sleeves to get the job done simply and cost effectively- you're here!

100 Sleeves Per Pack
Premium Quality 3 Mil. Thickness Polyethylene
Dimensions: 12.75" x 12.5" with Flush Cut Opening to fit both single LP and double LP gatefold jackets

Notes: A turntable without a StylusTimer is like a car without a Speedo!
Turntable phono cartridges have a stylus that should be replaced after every 1000 hours of use, sometimes even sooner, depending on the cartridge. A worn stylus degrades sound quality and can damage your valuable record collection. Unfortunately, most turntable owners have no idea how much time is actually on their stylus, especially as the months and years go by. Now you can track stylus usage easily and precisely with StylusTimer, a unique chronograph designed for use with turntables.

Tonar Stylus Timer
Protect your records
Track Listening Time
Determine when to replace your Stylus
Know precisely how many hours are on your stylus or cartridge
Track break-in hours and changes in sound quality over time
Protect your record collection from damage by a worn stylus
Know when it is time to replace your stylus or cartridge
Maximise your investment, especually with high-end cartridges
Have fun watching the hours climb, tracking your listening habits

Notes: The new Headphone-Case II can hold any common foldable and non-foldable DJ or studio headphones and now features a mesh pocket for USB flash drives.

Fits:

Sennheiser HD-25, Sennheiser HD-8, Sennheiser HD-7, V-Moda Crossfade, Pioneer HDJ-700R, Pioneer HDJ-1500K, Pioneer HD-2000, Ortofon O2, AIAIAI TMA-2, AIAIAI Studio, Technics HP-1200 /1210, Technics RP DH 1200, Shure SRH 40 /20, Beats by Dr. Dre Mixr, Beats by Dr. Dre Studio, Nocs NS900, Reloop RHP 30, Reloop RHP 20, Reloop RP-15, Ultrasone DJ-1 Pro, etc.

Basics:

Lightweight Durashock molded EVA foam and polyester exterior shell
Zip-compartment for USB flash drives
Including carrying handle and adjustable + detachable shoulder strap

Specifications:

Outer dimensions: 18 x 20 x 9 cm
Inner dimensions: 17 x 19 x 8 cm
Weight: 0,3 kg
Colour: black/black

Notes: Special self-acting liquid that removes dust, dirt and dried liquids groove-deep and without residue.

Notes: Case for our Disco Antistat record cleaning machine, with two brushes, without drying stand

Notes: A Smoked clear dust cover and faceplate designed specifically for the Pioneer CDJ-2000. The cover fits securely around the deck ensuring its sexy design is not hidden.

Notes: The Spin Clean Drying Cloths are easy-to-use lint-free washable record-cleaning cloths. These cloths can be washed and re-washed in a washer with whites and bleach. Use one for cleaning and another for drying the record surface.

These cloths are sold in packs of five.

Notes: This is a 25 pack of Goldring's popular Exstatic anti-static record sleeves, a perfect replacement for old, worn or paper sleeves. These inner sleeves provide excellent protection from scratches, dust and keep your LPs free from static.

Notes: The Glorious protective covers preserve delicate record covers. These transparent PVC flat bags can be used for the storage of records, obligatory for record stores and ideal for DJs.

Notes: 1/4" TRS to 1/4" TRS

This snake is designed to interconnect pro audio gear with balanced phone jacks. It is ideal for use with mixing consoles and patch bays. Features include:

- Nickel-plated plugs for rugged durability and efficient signal transfer
- Oxygen-Free Copper (OFC) conductors for enhanced signal clarity
- OFC spiral shields for effective EMI and RFI rejection and flexibility

Connectors: 1/4" TRS to 1/4" TRS

Notes: Replacement JNP100 stylus with spherical tip and aluminium alloy cantilever.

Fits MP100 cartridge.

Notes: The TonarTacky Cleaner uses a special grade of rubber elastomer that never loses its original surface tackiness. Just rolling it lightly over the record surface in straight lines is enough to remove dust and dirt trapped in the grooves. When the roller has become dirty it is easy to clean. Just remove from the holder and wash with a little bit of hand soap under the tap with water.

After drying the roller with a lint-free paper cloth it regains its original tackiness.

Notes: Tonar plastipap antistatic record inner sleeves (25 pieces) are made of super antistatic plastic paper reinforcement inside the plastic. This combination gives you both a dust free anti-static protection for your valuable records as well as additional strenght to avoid folding and creasing of the sleeves when sliding the sleeve in and out of the record album. This model 5311 plastipap is suitable for LP records only (12 inch-30 cm). Tonar plastipap inner sleeves are also available for 45, and 78 RPM records.

Tonar supplies record inner sleeves for 33, 45 and 78 RPM records as well as outer sleeves to protect your valuable album sleeves.

Notes: Tonar LP album cover 30 cm/12 inch records. 125 mu PP. Suitable for LP records only (12 inch - 30 cm). 25 pieces per pack

Notes: Replacement cartridge with conical stylus, 1/2" type mounting

Notes: Introducing the Decksaver cover designed specifically for the Pioneer DDJ-XP1 and DDJ-XP2 performance controllers. Engineered with precision and crafted to perfection, this cover is the ultimate companion for DJs who want to protect and preserve their valuable gear.

Custom-molded in the UK, the Decksaver cover is expertly crafted to perfectly fit the contours of your DDJ-XP1 or DDJ-XP2. Made from super-strong polycarbonate, it forms an impenetrable barrier, shielding your controller from dust, spills, and accidental impacts, ensuring its longevity and pristine condition.

With the Decksaver cover securely in place, you can have peace of mind knowing that your DDJ-XP1 or DDJ-XP2 is always protected, whether you're in the DJ booth, studio, or on the road. No more worrying about scratches, liquid spills, or dust accumulation that can affect the performance and lifespan of your equipment.

Designed with functionality in mind, the Decksaver cover allows easy access to all the key features and controls of your DDJ-XP1 or DDJ-XP2. The precision molding ensures that buttons, pads, and faders remain fully accessible, allowing you to navigate your performance effortlessly and without any compromise.

Transportation is a breeze with the Decksaver cover. Its rugged construction and form-fitting design provide a secure fit, allowing you to pack your DDJ-XP1 or DDJ-XP2 into your gear bag without worry. Whether you're heading to a gig, a studio session, or a jam with fellow DJs, your controller will be protected throughout the journey.

Join the ranks of professional DJs worldwide who trust Decksaver for superior gear protection. The Decksaver cover for the Pioneer DDJ-XP1 and DDJ-XP2 is a testament to the brand's commitment to quality and innovation. Rely on its robust build, sleek design, and reliable durability to keep your gear safe and sound.

Elevate your DJ performance and keep your DDJ-XP1 or DDJ-XP2 in pristine condition with the Decksaver cover. Experience the peace of mind that comes with knowing your valuable equipment is shielded from potential hazards. Trust in the industry-leading protection provided by Decksaver and focus on delivering outstanding performances every time.

Fits: DDJ-XP1, DDJ-XP2

Dimensions

Weight 0.62 kg
Length 33.5 cm
Width 23.8 cm
Height 4 cm

Material: Smoked clear polycarbonate.

Notes: Adds weight to the record to both stabilise uneven records and steady rotation speed.

Doubles as centrepiece for singles.

The record weight gives you:

- Smoother, richer tonal balance
- Increased dynamic range
- Vast improvement in overall soundstage clarity and instrumental definition
- Improved bass response
- Substantial reduction in vinyl noise floor
- Increased vinyl longevity

Notes: This is the same high-end inner sleeve design that comes with some of the best audiophile record pressings and labels, but at a reasonable price. It's an archival quality, three-ply, soft rice paper sleeve that is anti-static and acid-free. These sleeves will keep your collection dust and scratch free. After you've given your records a bath with GrooveWasher record cleaning fluids, it's only natural to dry them off and put them in some clean undies!

50 Sleeves Per Pack
Audiophile Standard Design
Three-Ply, Anti-Static, Rice Paper, Acid-Free, Premium Record Inner Sleeves
Keep Your Collection Clean and Dust Free
Dimensions: 12 1/8" x 12 1/8"

Notes: Cheap and cheerful DJ headphones built to a familiar formula. Over-ear design with punchy sound, removable coiled cable and a handy carry case for protection. Good value.

Supplier's Notes:
Professional quality studio monitor headphones built specifically for all stages of the music production process. The cutting edge design provides excellent sound insulation and ensures a comfortable fit even during long recording and mixing sessions. Dynamic 40mm speaker drivers deliver pristine sound across the frequencies and excellent bass response for precise monitoring. Swivel and rotate ear cups offer the perfect angle for any application and the interchangeable twist and lock connection cable provides additional convenience.

Speaker: driver40mmO
Frequency response: 20Hz - 20KHz
Impedance: 32 Ohms
Connections: 3.5mm stereo mini jack, 6.3mm stereo jack adaptor
Lead length: 1.5m coiled, 3m extended
Weight: 242g (without cable)

The box for this item contains :

DJ Headphones
3.5mm Coiled cable 1.5m (3m extended)
6.3 mm stereo plug adapter (gold-plated, screw type)
Compact hardshell carry case

Notes: Coiled neon yellow 1.5m thermo plastic cable with soft touch surface. Extends up to 3.2m. Perfect for DJing or small studio use. Comes with 1/4 to 1/8 screw-on adapter.

Notes: Replacement cable for the Sennheiser HD 25 headphones.

- Length 3m
- 6.3mm stereo jack plug

Suitable for the following Sennheiser headphones: Sennheiser HD-25, Sennheiser HD25-13, Sennheiser HD-25-II, Sennheiser HD-25-13 II, Sennheiser HD-25 C II, Sennheiser HD25-1 II

Notes: We wanted to organize patch cables that were hanging on all possible objects in our Lab, therefore we decided to make patch cable holders.

Rigid, 2mm aluminium powder coated cable holders can host over 100 patch cables in perfect order! Two screws for fixing the cable holder are included.

Notes: Designed and engineered in the UK for the Denon SC5000 and SC5000M media players. Trusted by clubs and professionals worldwide to preserve the lifespan of their equipment. Custom made from super strong polycarbonate to protect the platter, fader and controls during transportation. Precision moulded for an exact fit whilst accommodating cables, your SC5000M can sit ready for operation. From Pacha and Space in Ibiza to Fabric and Ministry of Sound in London, the constant you'll find is Decksaver. Fits both SC5000 and SC5000M.

Notes: The Decksaver Behringer Lyra-8 Cover features an ultra-durable polycarbonate shell, designed to protect from dust, liquid, particulates and accidental impact damage. It will also protect against superficial damage such as scratches or bumps while on the move. The high quality smoke/clear sheen allows you to see the Lyra-8 through the cover, allowing you to see your gear at all times. The smooth and sheen like finish will slide straight into a bag, ideal for the travelling musician. The cover is custom moulded to shield keys, controls and more from damage, while still allowing you to accommodate cables.

Please note: The Soma Laboratory Lyra-8 Synthesiser is not included in this purchase. It is shown for demonstration purposes only.

Dimensions (LxWxH): 27.2 x 27.2 x 3.6 cm
Weight: 0.35 kg

Notes: Add a splash of colour to your setup with six colour options.

USB-C 3.2 Gen 2, 10Gbps data rate with up to 100W Power Delivery

Dual ferrite cores help prevent high-frequency noise from outside sources

1.0m/3.2ft length allows for connecting gear while still maintaining full power delivery and data rates

56kO pull-up resistor to protect your devices

Chroma Tie velcro strap included for easy cable management and storage.

DJ Tech Tools have been making great USB data cables for professional performers and artists since 2011. By popular demand, the cable line has been brought to the USB-C universe, adding a much-needed affordable, good looking, and high quality USB 3.2 cable.

Notes: Replacement stylus for Audio-Technica’s AT91R cartridge. Incorporates a bonded conical stylus tip and an aluminium alloy tube cantilever for the pick-up of subtle details.

0.6 mil conical replacement stylus for these cartridges: AT91R and CN5625AL

Notes: Protective outer record sleeves

Provides a lifetime of protection for your valuable record collection

100x 3-mil polyethylene sleeves
12.75" x 12.75"
No flap
Fits one 12" standard single or gatefold jacket

Notes: The Selektor Crossbody Bag x 40 approximately holds 40 Single 7" records.

Features protective padding on its front and back. UV Protection & Water Resistant. Made with Cordura fabric featuring water resistant and UV protection treatment.

Aesthetics & Function - unique functionality, style & comfort for carrying your records and everyday carry.

Notes: The Selektor Crossbody Bag x 40 approximately holds 40 Single 7" records.

Features protective padding on its front and back. UV Protection & Water Resistant. Made with Cordura fabric featuring water resistant and UV protection treatment.

Aesthetics & Function - unique functionality, style & comfort for carrying your records and everyday carry.

Notes: Replacement panel for the Xoac Devices Sofia module.