All genres charts

Notes: As close to an industry standard as you can get. The archetypal DJ headphones: punchy, comfortable and durable. Firm favourites of countless DJs, for good reason.

Supplier's notes:
The Sennheiser HD 25 Headphones have been redesigned, featuring the iconic split headband with a single-sided connection cable and a flip-away earcup for convenient single-sided listening.

With a frequency response of 16Hz to 22kHz, an impedance of 70 ohms and a maximum SPL of 120dB, the HD 25 headphones are ideal for any monitoring application; whether broadcasting, live recording, in the DJ booth or just travelling from venue to venue.

Review: The Hartnoll Brothers have decided to remaster and reissue their eponymous 1991 debut album - frequently referred to as 'The Green' album for obvious reasons. Amongst the numerous editions is this delicious box set, which compliments the fantastic original album (stretched across two slabs of wax), with a slipmat, a 60-page hardback book of photos and fresh liner notes, and an additional double-album of rarities and unreleased cuts from the period. It's this latter item, which includes B-sides, non-album singles (hello 'Satan') and sought-after remixes (Sasha's legendary version of 'Midnight' and the barely known 'Rhyme and Reason' take on 'Satan'), which makes the box set so alluring to fans. Basically, it's the ultimate edition of a British dance classic.

Notes: A workhorse studio condenser microphone with a warm, silky character, exceptionally low noise and high SPL handling - ideal in a wide range of studio applications.

The World's Most Popular Studio Microphone

Since it launched over 30 years ago, the NT1 has become the world's most popular studio microphone and the go-to for countless creators across the globe - from bedroom musicians and studio professionals to streamers, podcasters and voice over artists. The NT1 Signature Series carries on this legacy, delivering classic studio sound for today's creators.

Iconic Signature Sound

Featuring our stunning HF6 1-inch true condenser capsule, the NT1 Signature Series boasts the same iconic sound signature that its forebears are revered for. Sparkling top end, highly detailed midrange, and rich, warm bass make it shine in almost any recording application you can imagine - from vocals, piano and acoustic guitar to drums, percussion and electric guitar.

Your Mic, Your Way

For the first time in the NT1's 30-year history, this iconic microphone is available in a range of iconic colours. This limited-edition collection features five vibrant colourways alongside the timeless black finish, including red, green, purple, pink and blue.

A True Workhorse

A true workhorse that excels in a wide range of studio applications. With an exceptionally low noise floor and incredibly high max SPL, it captures everything from whispers to drums with the utmost clarity. The perfect all-rounder studio microphone.

Legendary RODE Quality

The NT1 Signature Series is designed and made using the highest-grade components in RODE's precision manufacturing facilities in Sydney, Australia. It's built to last, with a rugged body machined from high-grade aluminium and comes with our industry-leading 10-year warranty, so you can rest assured it will remain your go-to for the long haul.

Premium Accessory Kit

Keep your recordings pristine with the studio-grade shock mount and pop filter included with the NT1 Signature Series, the perfect tools for minimising audio artifacts caused by knocks, rumbles and plosives. It also ships with a premium XLR cable so you can start creating right away - just plug straight into your audio interface or mixer and start recording exceptional audio.

Key Features

Large-diaphragm cardioid condenser microphone
HF6 1-inch true condenser capsule, precision engineered to sub-micron tolerances
Tight cardioid polar pattern for excellent background noise rejection
Classic NT1 sound signature - rich, warm bass, detailed midrange and sparkling highs for exceptional performance in a wide range of studio applications
Smooth frequency response and high sensitivity for incredible balance and clarity
Extremely low noise (4dBA) - the world's quietest studio condenser microphone
High SPL handling capabilities (142dB) for capturing very loud sound sources
Studio-grade shock mount and pop filter and premium XLR cable included
Available in classic black or a range of limited-edition colours, including red, green, purple, pink and blue
Rugged aluminium body with a high-grade finish - incredibly resistant to scuffs and scratches
Industry-leading 10-year warranty
Designed and made in RODE's precision manufacturing facilities in Sydney, Australia

Acoustic & Electrical Specifications

Acoustic Principle: Pressure gradient
Active Electronics: JFET impedance converter with bipolar output buffer
Capsule: 1.00"
Polar Pattern: Cardioid
Address Type: Side
Frequency Range: 20Hz - 20kHz
Output Impedance: 100O
Maximum SPL: 142 dB SPL
Equivalent Noise (A-Weighted): 4dBA
Sensitivity: -32 dB re 1 Volt/Pascal (25 mV @ 94 dB SPL) +/- 2 dB @ 1 kHz
Analogue Power Requirements: P48
Analogue Output Connection: 3-pin XLR

Mechanical

Weight (grams): 313

Dimensions (millimetres)
Length: 52
Width: 52
Height: 189

What's in the Box
1x NT1 Signature Series
1x SM6
1x XLR Cable

Notes: The AT-XP series cartridges provide a high-quality sound for vinyl DJ's. Offering all of the features of a DJ cartridge, but with a Hi-fi sound, the XP series are perfect for the stage and club DJ who prioritises sound quality.

- Audiophile DJ cartridge AT-XP5 pre-mounted on the AT-HS6BK headshell
- VM dual magnet construction
- Durable robust design for high-quality specialist DJ playback
- Carbon fibre-reinforced ABS cantilever and nylon wire suspension ensure precise tracking
- Compatible with the replacement styli ATN-XP3 and ATN-XP7
- Configuration as single cartridge (AT-XP5), Replacement Stylus (ATN-XP5) and as headshell bundle together with the headshell AT-HS6BK available (AT-XP5/H)

Notes: A standalone instrument to get you into the world of analogue synthesis. Hand-built, simple to use and capable of some excellent drones and tones. Just add headphones.

Supplier's Notes:
OVUM is where you start: a standalone all-analogue tool for exploratory sound synthesis - all you need to start creating is headphones.

OVUM is designed for exploring pure tones, drones, and microtonal sound textures. Five independently controlled triangle-core oscillators give you five lush voices to layer and evolve. Each voice has a separate control for volume, pitch, and tone, and can be switched between a bright square wave and a crisp triangle wave.

OVUM is hand-built from 100% analogue circuitry, with no digital components, screens, quantization, or key-combinations to memorize - everything is immediate and at your fingertips.

OVUM is enclosed in a beautiful and sturdy wood and aluminum case that feels as good in your hands as it looks on your tabletop.

OVUM has a USB-C port for power, and a single 3.5mm audio output jack for headphones or line-out to connect to an amplifier, audio interface, or effects.

To reduce waste, by default OVUM comes with just the instrument and a USB to USB-C power cable. If you don't have a spare USB power supply, they can be added to your purchase at checkout. OVUM is portable, but does not contain a battery. It can be powered by any USB powerbank.

Notes: 'Beast's Chalkboard' is dual channel stepped voltage source and adder for your eurorack modular synthesizer system. It primarily is intended as a dual octave switcher for VCO's but has many other uses including sequence transposition, FM ratio creation, buffered CV distribution and VCO calibration.

Technical Specifications:

Supply: +/-12V (Reverse voltage & polyfuse protection)
Current Draw: ~30ma
Size: 6 HP
Depth: 22mm (including power header)
Offset Error: +/- 10mV

Notes: The Happy Ending Kit is an easy way to get everything needed to start a Eurorack modular system.

The Happy Ending Kit includes:
1 x Z-Rails set plus screws to attach to Z-Ears
1 x uZeus 4HP PSU with 2 x flying bus boards
1 x UK 3-pin mains adapter

Notes: When the classic MS-20 analog synthesizer appeared in 1978, it had a trusted partner in the SQ-10 step sequencer. Now, after thirty years, the MS-20 has been reborn as the MS-20 mini, and the SQ-10 has evolved into the more modern SQ-1.

The SQ-1 is a compact step sequencer with 2 x 8 steps. It's wealth of connection jacks allows it to be connected to the MS-20 and a variety of other synthesizers. Vintage analog synths or the latest compact synths can be controlled from this single unit. You can also switch between a variety of synthesizer modes and use the step buttons to create performances overflowing with spontaneity, just as when using a volca unit.

Liberate yourself from the numerically-bound parameter editing that's typical on a DAW; you'll enjoy truly musical inspiration as you train your ears and concentrate on what your fingertips are doing. Don't miss the experience of music that's driven by your instinct.

Rather than the commonly used V/Oct standard, the CV design of the MS-20 always used the Hz/V standard that provides excellent pitch stability limiting the step sequencers that are able to correctly control the MS-20. As a descendant of the SQ-10, the SQ-1 supports the Hz/V standard, enabling it to perfectly control the MS-20 or MS-20 mini. It goes without saying the V/Oct standard is also supported, and the voltage level of the CV output and polarity of the GATE output can be specified as appropriate for the device you've connected. This versatility will enable you to control a wide variety of other synthesizers as well.

As a connector, the SQ-1 provides two CV/GATE OUT channels, the standard MIDI OUT and USB MIDI, littleBits out (to connect to the littleBits synth kit by littleBits Electronics Inc.), plus the SYNC IN/OUT channel that allows you to connect to the volca series and monotribe. Compact and complete with all the functions you need, the SQ-1 is the ideal hardware sequencer.

The SQ-1 provides two channels (A and B) of 8-step sequencer that can operate consecutively, or be used in a variety of other modes. For example, you can run A and B following each other to function as a 16-step sequencer, ignore the order and make the steps play randomly, or use A and B to control different parameters as they run in parallel. From simple sequences to complex changes, you can choose from a variety of modes to suit your needs.

The 2 x 8 step buttons can be used in the usual way to turn notes on/off, but you can also use the MODE button to switch their function, opening up powerful possibilities such as letting you "perform" the sequence itself, as on a volca unit.

"Active Step" lets you skip steps mid-way through a sequence, and "Step Jump" lets you instantly play just the step that you press, producing irregular rhythms or effects that are reminiscent of short loops. "Slide" produces an effect in which steps are connected smoothly; using this to control a synth bass is an easy way for anyone to generate an acid sound.

Packed with carefully selected functionality, the SQ-1 features a compact and very sturdy sheet-metal body. Placed beside the MS-20 series, you'll notice a sense of solidity that gives the impression they were manufactured in the same era. The unit can operate on two AA batteries or on USB bus power.

Sequence step resolution is selectable as quarter notes, eighth notes, or 16th notes.

You can specify the way in which the step knobs control the pitch. The knob values can specify the pitch directly, or they can specify the closest note in a major, minor, or chromatic scale.

Notes: Nagaoka MP-110 the successor to the highly acclaimed and classic Nagaoka MP11 phono cartridge, the new Nagaoka MP-110 phono cartridge extends and strengthens its predecessor's prowess and talents to a new level of radiance. You'll hear more music, more detailed refinement to enjoy and savor. The Nagaoka MP-110 is the cartridge to start with and to keep for a long time.

Features:
-Superfine polished eliptical diamond bonded stylus
-Powerfull samarium cobalt magnet
-Lightweight aluminum alloy cantilever for high fidelity
-Carbon fibre reinforced plastic shoe
-Anti ferro magnetic permalloy shield casing

Stylus replacement: Nagaoka JN-P110

The stylus replacement interval varies depending on the using conditions. But for general use at home, the reference time is between 150-200 hours in which the stylus begin to wear and the tone quality deteriorates. Recommend replacing the stylus as aerly as possible to enjoy clear tone for a long time and not to damge the disc grooves.

Notes: A studio monitor is no ordinary loudspeaker. Unlike a conventional speaker, a true monitor must be unerringly accurate, with a flat frequency response and vanishingly low distortion. It has to tell you, the music producer-dependably and unquestionably-exactly what is or is not in your recording. In a studio-grade monitor speaker, there is no place for the usual list of speaker colorations and limitations prevalent in conventional loudspeakers. Response peaks\dips, uneven polar response, high THD, nasal midrange, bloated mid-bass, and crossover-induced phase incoherence do nothing but undermine the confidence demanded for superior mix performance.

Introducing M-Audio's BX8-D3 monitors-the return of a studio icon and the successor to the industry-renowned BX D2 monitors. Trusted by recording/mix engineers and composers globally, M-Audio's BX monitors guarantee absolute surgical precision and repeatable engineering excellence.

Listen with confidence: with M-Audio's BX8-D3 studio reference monitors, you'll hear everything in lifelike detail, so your mixes and recordings will sound their best!

A monitor's drivers are the heart and soul of its performance. Driving the low-end and midrange, BX8-D3's 8-inch military-grade Kevlar woofers are rigid and lightweight, delivering outstanding transient response whist negating unwanted 'cone breakup'. BX8-D3's treated silk dome tweeter provides the perfect combination of low mass and the absence of audible resonances that plague conventional tweeters. Together, the BX drivers deliver critical detail, nuance and dynamic accuracy, so your mixes have the veracity and transparency you demand.

With M-Audio's BX8-D3, every detail has been meticulously engineered with one goal in mind - to facilitate the freedom to mix with confidence. BX8-D3 monitors have a rear-mounted bass port, meticulously engineered to the exact length and diameter. The result? Deep, defined bass response with maximum bass extension and resolution. When combined with a smoothly-flared port, BX8-D3 monitors markedly reduce the audibly-intrusive air turbulence that results when bass is played back at high sound pressure levels (SPLs). BX8-D3's tweeter is mounted in a custom waveguide for reliably accurate dispersion that eliminates unwanted high-frequency 'scatter', whilst ensuring a soundstage that remains consistently wide and stable. For seamless setup and easy location of the optimum listening position, the BX8-D3's front-mounted positioning LED shines brightly when you're located in the perfect listening spot, for uncompromisingly accurate and reliable critical evaluations. Finally, BX8-D3's iconic design on the front panel M-Audio's famous 'keyhole' shape is more than just an attractive look: This special 'fastenerless' design ensures so there are no driver attachment screw heads to interfere with the sound coming from the drivers.

Efficient and accurate: Driving the BX8-D3 monitors are two Class A/B internal amplifiers that power the woofer and tweeter separately - each optimised for the specific frequency range it handles and engineered to complement the characteristics of its companion driver. A precision-tuned crossover guarantees each driver only handles the frequencies that it produces most efficiently for a sound that is cohesive across the entire frequency spectrum. Play louder with less audible distortion: The BX8-D3 bi-amplified design is a far more efficient and accurate way to power a loudspeaker than using a single full-range amplifier to drive multiple driver elements.

No two listening spaces are the same. Therefore, the BX8-D3 monitors custom tailors your sound to your environment, so you will always experience sonically-true, reassuringly-accurate sound reproduction. Negate problematic bass frequencies and limit the impact of nuisance standing waves thanks to BX8-D3's special Acoustic Space control for precise adjustment of BX8-D3's sound output in line with your studio space.

Whatever your needs, the BX8-D3 Studio monitors guarantee to assimilate into your existing setup with ease. Combining conveniently-located, rear-mounted XLR and 1/4-inch balanced inputs, BX8-D3 connects to virtually all studio equipment including mixers, interfaces, DJ gear and more.

M-Audio's BX8-D3 monitors excel in every way, the rightful successor to the original studio icon. Fusing superb drivers, meticulously engineered enclosures, great-sounding amplifiers, versatile control options and standardized connection facilities, BX8-D3 delivers sound quality you can trust.

Notes: The new CARRY LITE DJ-CASE XXL PLUS is a very lightweight and compact carrying solution for your DJ-equipment and comes in a nice full-black matt finishing. Constructed from laminated MDF panels and anodized aluminum profiles the CARRY LITE design features a fully padded interior with a variable pick & pluck foam that allows to create individual adapted compartments for various-sized DJ-controllers such as Pioneer DDJ-SX2, DDJ-SX3, Denon MCX-8000, Denon MC-7000, Roland DJ-808 or similar-sized DJ-controllers. The pick & pluck foam consists of two separate layers providing the additional option to create another slot underneath the controller for laptop or cable storage.

Fits:

Denon DJ MC-7000
Denon DJ MCX-8000
Denon DJ SC Live 2
Denon DJ SC Live 4
Native Instruments Kontrol S8
Numark NS6
Numark 4Track
Numark Mixdeck Quad
Numark IDJPro
Pioneer DJ DDJ-FLX6
Pioneer DJ DDJ-FLX10
Pioneer DJ DDJ-SX
Pioneer DJ DDJ-SX2
Pioneer DJ DDJ-SX3
Pioneer DJ DDJ-RX
Pioneer DJ DDJ-RX2
Pioneer DJ DDJ-1000
Pioneer DJ XDJ-R1
Pioneer DJ XDJ-Aero
Pioneer DJ DDJ-S1/T1
Rane One
Reloop Mixon4
Roland DJ-808

Basics:

Constructed from laminated MDF and anodized aluminum profiles and butterfly latches (can be secured with a padlock)
Fully lined interior of 5 mm EVA foam and a 3 cm thick egg-crate foam on lid
Including 2-layer (2,5 and 3,5 cm) pick & pluck foam to create individual compartment and slots for dj-controllers, battle-mixers, laptops or smaller accessories.
Including detachable lid
Convenient carrying-handle and option to attach a separate shoulder-strap.

Specifications:

Outer measures: 50 x 80 x 16cm
Inner measures: 46,5 x 77 x 11cm
Weight: 6,3 kg

Notes: Endorphin.es Cockpit² is a 4-channel stereo mixer with side-chain ducking.

Key facts:

Increased headroom
Improved sound quality
The LEDs are blue/red instead of red/green (Daltonic friendly)
No TRRS jacks anymore
New aluminium knobs on the black module version

Power consumption:
240 mA +12V
75 mA -12V
0 mA 5V

Dimensions:
6 HP
38 mm deep

Notes: Numark's take on the classic scratch mixer formula ticks all the boxes: two channels each with three-band EQ, plus perfectly spaced channel faders and crossfader for cutting and scratching. Simple but effective.

Supplier's Notes:
Pure professional power.

M2 is a two-channel DJ scratch mixer with all the essentials to hit the stage in Numark style.

Switchable phono/line inputs for turntables, CD players, and other line sources make M2 a superb choice for any DJ setting from weddings to clubs, parties to practice setups. A mic input with dedicated EQ and gain, and a headphone output with crossfader-style cueing complete the plentifully featured package.

Three-band EQ on each channel plus crossfader-reverse and slope controls give you all the tools you need to drive your audience from behind the wheels of steel. M2 is the perfect mixer for any scratch DJ.

Packaged Dimensions: 14.6" x 13.4" x 6.7"

Packaged Weight: 8.8 lbs.

Product Dimensions: 11.4" x 9.5" x 3.6"

Notes: The CTRL CASE XDJ-RX3/RX2 is a super lightweight and compact carrying solution for your Pioneer XDJ-RX3 or XDJ-RX2 Controller. The case is crafted from lightweight Durashock molded EVA foam and water repellent polyester exterior. The lid is lined with high density egg-crate foam to protect the displays, jog wheels, and controls.

Fits:
Pioneer XDJ-RX3
Pioneer XDJ-RX2
Pioneer XDJ-RX

Specs:
Outer measures: 76 x 50,5 x 13 cm
Inner measures: 73 x 47,5 x 11 cm
Weight: 2,34 kg

Notes: Connect with Bluetooth

The M-Audio BX4BT Multimedia Reference Monitors offer the flexibility to playback audio from any Bluetoothr streaming device with excellent studio quality sound. This opens the possibilities of playing audio from any Bluetoothr device including a turntable, phone, or even a computer to stream a reference mix. Get a better listening experience with these compact, powerful, Bluetoothr enabled M-Audio BX4BT multimedia reference monitors.

Professional Performance and Design

M-Audio's BX4BT monitors produce 120 Watts of professional sound inside a futuristic design that delivers pro-grade sound. The two-way design features an Acoustically-inert MDF cabinet with bass reflex that pushes low frequencies through modern Black Kevlarr drivers. Plus, enhanced rear ports and computer-optimised natural silk dome tweeters deliver the full spectrum of frequencies needed for any type of media.

Front & Rear Panel I/O

The BX4BT monitors offer all the connections you need to playback audio from all your devices. The rear panel features 1/4", 1/8", and RCA inputs, while the front panel features 1/8" aux input and a headphone connection that turns the speakers off for private listening. This feature is great for those late nights in the home office or mixing sessions where you don't want to disturb anyone.

Speaker Placement Controls & EQ

The M-Audio BX4BT features a Left/Right Active Speaker Position Switch letting you choose which speaker is sounding from the Left or Right side. This is useful if you are left-handed and want the speaker with the front panel volume control on your left side, or vice versa. Also on the rear panel are High-EQ and Low-EQ controls to boost or cut the low end or add some shimmer to the highs.

Limitless Creativity with MPC Beats Software DAW - Effects and Instruments Included

The M-Audio BX4BT comes bundled with MPC Beats, the powerful music-making and recording desktop software DAW for Mac and PC based on iconic MPC hardware. Featuring a full array of musical instrument plugins, effect plugins, and audio and drum samples, MPC Beats is the best way to start making great-sounding music quickly.

Technical Specifications

Frequency Response: 69 Hz - 22 kHz
Output Power: 120 W (total peak), 2 x 25 W (RMS)
Drivers: LF Driver 4.5" / 114.3 mm HF Driver 1" / 25.4 mm; silk dome
Audio Inputs: (1) RCA stereo input pair 2 1/4" (6.35 mm)
TRS inputs: (1) 1/8" (3.5 mm) stereo auxiliary input
Headphone Output: 1/8" (3.5 mm) stereo output
Interconnection Cable: 1/8" (3.5 mm) TRS
Bluetooth Range: 100' (30.5 m)
Power: 100-240 VAC, 50/60 Hz, 85 W
Dimensions (width x depth x height, per speaker): 6.1" x 6.9" x 8.9" 156 x 175 x 225 mm
Weight (per pair of speakers:) 9.83 lbs. 4.46 kg

Notes: Entry-level DJ mixer from the ever-trustworthy Reloop. Very simple two-channel design with three-band EQ and a Bluetooth option for convenience.

Supplier notes:
RMX-10 BT - a compact 2-channel DJ mixer, which facilitates wireless music streaming directly to the mixer via the integrated Bluetooth interface.

This way it is possible to use a smartphone or tablet as playback source and route the signal through the mixer. The Bluetooth signal can be routed to both channels. Moreover, the 45-mm crossfader is user-replaceable and the smooth linefaders make mixing more comfortable.

The RMX-10 BT has a 6.3-mm microphone input with separate volume adjustment, as well as a 6.3-mm headphones output with volume adjustment and cue-mix function. Master output volume can be monitored via an integrated LED display. The space-saving and sturdy construction is made of metal.

Notes: The mmMidi is a simple & compact MIDI to CV interface for your Eurorack synthesiser. It translates both MIDI clock and 2 Channels of MIDI note, velocity and gate information to corresponding voltage control signals. The mmMidi is quick to set up and requires minimal configuration.

Notes: ETHER is a wide-band receiver that makes it possible to perceive the electromagnetic landscape around you.

ETHER is a kind of anti-radio. Instead of being tuned to a specific radio station, it receives all the interference and radiation that a traditional radio tries to eliminate in order to create a clean signal. It captures the radio waves as is from hertz to gigahertz because it doesn't contain the tuned input circuit that filters out all frequencies except the narrow band of a specific station. This allows ETHER to perceive the invisible electromagnetic landscape that humans created unintentionally, making possible live electromagnetic field listening and recording.

The design was inspired by the design for the very first radios (early 1900s) that had no tuning wheel. At this time there weren't many radio stations, and all of them used Morse code. It was possible to distinguish each transmitter by ear, as each one had its own specific timbre or voice.

ETHER is pocket-sized (103x58x17mm) and light-weight (73g with batteries). It consumes very little power and runs on two AAA batteries. How long it can run on two batteries is unclear,- but the battery life is more than 300 hours if you using alkaline or lithium batteries.

ETHER was intended to be a unique accessory for the conscious modern human. Special designed enclosures made in Europe were used, as well as high-quality PCB and furniture providing long life and high reliability. So with ETHER, you get both a unique sound experience and a cool-looking high-quality gizmo.

ETHER has both magnetic and electric components for sensing radiation. For the magnetic component, it has a built-in magnetic antenna, like the ones used in old long-wave radios. The antenna has maximum sensitivity on ETHER's axis. By changing the orientation, angle and position of ETHER, you will change the sound. For the electric component, it has antennas printed on the PCB and the special input pins placed on the anterior surface.

ETHER V2 has two external antenna pins. You can touch any conductive material or surface (including your body) with the pins and use objects or yourself as a big external antenna! Two pins are connected to different points of the circuit and interact differently with electromagnetic waves. Switching from one to another or using them both, you can change the sound. Far away from a city, we recommend trying to use a piece of wire 1-4 meters long connected to one of the pins for getting some interesting sound.

ETHER V2 has two wheels for sound control and the power switch. The upper wheel adjusts the amount of high-frequency amplification and regeneration. The lower wheel is the volume. By adjusting high-frequency gain you can focus ETHER on different dynamical levels of surround interferences getting the richest and interesting sound.

ETHER is not just an inductive sniffer like some projects you can easily find online. A simple low-frequency inductive sniffer will be silent in most places that are full of sounds in the video. Such devices need to be placed close to an emitting source and will not work on a street. All they contain is a coil and a low-frequency amplifier. In comparison, ETHER has a regenerative circuit and a demodulator, making it an actual radio wave receiver, not just an amplifier of low-frequency magnetic fields. However, ETHER can perceive the low-frequency magnetic fields as well. But, honestly, if your goal is to scan objects in close proximity (0-20 centimeters), a simple inductive sniffer will work cleaner and more focused due to its narrow band and lower sensitivity. ETHER was designed to be a part of your walks in the city and may even pick up sounds in a forest or at the seashore. Also, ETHER can perceive the electric component of the radiation as well, capturing radiation that is far above the audio range and is much more sensitive. Therefore, it has a significantly different design, functions and implementation than a simple inductive sniffer even if in some cases their functions can overlap.

ETHER is very sensitive to any kind of digital circuitry that's in close proximity, hence the lack of an SD-card recorder or something like that inside. You also have to make sure to keep other electronic devices that you carry (phone, laptop, recorder) at least 30cm/1ft away to avoid interference, but ETHER definitely works well when you walk around with a smartphone and laptop.

Notes: Receives MIDI data from a single MIDI OUT (e.g. sequencer or master keyboard) and produces identical copies at the 12 MIDI THRU sockets. These can then be connected to the MIDI IN of sound modules or other devices which require MIDI signals sent to them.

High quality Kenton MIDI Thru box with opto-isolated MIDI In and separate drive for each MIDI Out. Powered from a mains adapter so you can fit and forget.

Notes: This small utility is the pedal's lover best friend, it allows 2 diferent chains of pedals to be independently connected to your synth.

The Send channels attenuate the synth level to instrument level.

The Return channels amplify the signal from instrument to synth level.

Specs:
- Width: 4 HP
- Depth: 3 cm
- Max current: 10mA

Notes: Compact but powerful all-rounder for control over software, plugins and hardware. Typical high-quality Akai build, with a combination of keys, pads, rotary controllers and transport controls for versatility.

Supplier's Notes:
37-key MPK Mini keyboard with advanced connections and controls

The MPK Mini keyboard line revolutionized portable music-making for producers and beat makers all over the world. The new MPK Mini Plus builds on that innovation by empowering musicians with full creative control that delivers ultimate feel and expression, along with next generation performance tools. Advanced connectivity easily and fully unites all your favourite studio devices for complete and expanded hardware integration in a compact 3-octave design.

Full Portable Creative Control

While maintaining its compact footprint, MPK Mini Plus offers extensive controls providing deep command over a wide range of features. 8 velocity-sensitive RGB-backlit MPC drum pads are the backbone for not only playing dynamic beats and programming drums, but for also assigning pro-gram changes and triggering additional CC parameters. Dial in effects with the 8 assignable 360-rotary knobs for every function including filters, automation, pan controls, and more. For the first time on any MPK Mini, enjoy dedicated Transport controls for total integration into your DAW. Eliminate needless back-and-forth from your QWERTY keyboard or mouse and stay engaged in the creative workflow with dedicated Play, Stop, Record, Loop, and Locator buttons.

Ultimate Feel and Expression

As with all MPK Mini controllers, performance starts with the keys. MPK Mini Plus features 37 keys with the Gen 2 Dynamic Keybed for expanded melodic and harmonic creation. 3 full octaves mean more room for two-handed chords, arpeggiation, and laying down solos or soundscapes. The Gen 2 Dynamic Keybed features incredibly playable keys with a wider velocity range, delivering a world-class level of note dynamics and response. With more keys, your music will need new ways to add feel and expression, so the MPK Mini Plus adds dedicated Pitch Bend and Modulation Wheel controllers to help all keyboard performances truly come alive. Alongside the iconic Joystick Controller, there's no shortage of tactile interaction for near limitless expression.

Advanced Connectivity and Standalone Operation

For those spontaneous creative moments or quick jams sessions, MPK Mini Plus can operate with standalone functionality. The new polyphonic Step Sequencer is convenient for capturing new ideas on the fly. Record notes and drum patterns simultaneously for some serious standalone music creation. Connect to any Class-Compliant USB or 5-pin MIDI device and use the CV/Gate connectors to plug into your rack and other modular synths. The MPK Mini Plus is versatile enough for the serious beginner looking to grow their creative space, and also for those seasoned pros who want to get the most out of their studio gear.

Includes MPC Beats DAW for Mac and PC

The bundled MPC Beats software DAW for Mac and PC offers the iconic MPC workflow right on a desktop or laptop computer, and also includes thousands of sounds, drum samples, loops, and plugin instruments to create your next hit song. With more keys on the 37-note Gen 2 Keybed, MPC plugin instruments like Electric and Tubesynth will come alive with extended sonic range. Set the MPK Mini Plus on a desktop and connect with standalone MPC devices to control Mellotron and Hype plugins.

Even with 3 octaves, MPK Mini Plus will fit in your gig bag to easily transport alongside everyday music production items. It's simple math; adding MPK Mini Plus to any workflow equals expressive creativity and intuitive control for modern music creation and beat making.

Connectors
USB Type-B port
(5) 1/4" (3.5mm) CV Outputs
(2) MIDI DIN In/Out Ports
(1) Sustain input
Power Via USB type-B (bus powered or connected to wall adapter).

Dimensions (width x depth x height)
17.76" x 7.08" x 2.04"
45.11 cm x 18.0 cm x 5.2 cm

Weight
2.78 lbs.
1.26 kg

Notes: The DigiTechr Mosaic Polyphonic 12-String effect pedal sets you upon the path of creating lush 12-string sounds with either 6-string electric or amplified acoustic guitars. Immediately identifiable 12-string tones are now yours with octave low strings and doubled high strings. Single notes and full chordal strums shine with polyphonic richness and celestial movement that will inspire you. The Mosaic's balanced low-end response with crisp octave shimmer produces a tone that's lush and articulate, just as with a 12-string guitar.

Tailor the Mosaic's sound with the independent Level and Tone controls. Level will control the 12-string effect intensity while Tone shapes the overall brightness of the effect. The Mosaic will give you a richer, more resonant and full tone than a standard six-string guitar. It is true bypass and uses a 9V DC power supply to easily integrate into your existing pedalboard.


General Specifications
SAMPLE RATE

44.1 kHz
FREQUENCY RESPONSE

20 Hz-11 kHz (Effect Enabled)
SIGNAL TO NOISE RATIO

> -105 dB (A weighted); ref = max level, 22 kHz bandwidth
THD

0.004% @ 1 kHz; ref = 1 dBu w/ unity gain
A/D/A CONVERSION

24-bit
INPUT

1/4" Unbalanced (Tip-Sleeve)
OUTPUT

1/4" Unbalanced (Tip-Sleeve)
CONTROLS

Level, Tone
TRUE BYPASS

Yes. True bypass circuitry preserves your tone when the pedal is not in use.
Dimensions
LENGTH

4.75" (120mm)
HEIGHT

1.75" (44mm)
WIDTH

2.875" (73mm)
WEIGHT

0.36 lb. (163g)

Notes: Your USB device is plugged into the MIDI USB Host mk3 instead of into a computer. It provides MIDI In & Out sockets for USB MIDI keyboards and controllers which have only a USB B type socket. For example, used with a USB-Solo, it allows the USB-Solo to be used in a standard MIDI setup, just like a Pro-Solo. It has a USB Host port (USB A type socket), a MIDI In and a MIDI Out (both 5 pin DIN).

The MIDI USB Host mk3 now has additional features. In addition to the standard operating mode, there are now two further modes.

Standard mode (LED Green):
MIDI data received at the MIDI In socket is sent to the USB device and MID data from the USB device is sent to the MIDI Out socket.

Merge 1 mode (LED Amber):
MIDI IN does not go to USB device but instead is merged with MIDI data coming from the USB device which is then sent to the MIDI Out socket.

Merge 2 mode (LED Red):
MIDI IN data is sent to the USB device & is also merged with MIDI data from the USB device which is then sent to the MIDI Out socket.

The modes are selected sequentially by pressing the recessed push button - the LED colour indicating which mode is current.

The attached USB MIDI device MUST be 'Class Compliant'.

The MIDI USB HOST is powered by a regulated 5V mains adaptor (supplied), and can supply up to 1 Amp of buss power to the attached USB device. This product is supplied with a multi-region power supply suitable for use in most countries.

Attractively finished in brushed aluminium with black screen print

Dimensions: 110mm x 55mm x 32mm

Connecting
You can connect one "Class Compliant" USB device directly into the MIDI USB Host. If your host has the latest firmware already installed then you can plug in a powered USB hub and up to four USB devices can then be connected. Earlier MIDI USB Host mkIIs can be updated with a free download which is available from the support section of our website. Serial numbers N6-2421 already have the hub compatible firmware. Serial numbers N3-0541and upward can be updated.

It is recommended that you attach your USB device to the MIDI USB Host before applying power. Then plug-in and power the power adaptor. The active LED should be lit up. If you apply power with nothing plugged into the MIDI USB Host, the Active LED will flash steadily; this is to indicate that it is waiting for a suitable device to be attached. If it is still flashing when you have attached your device, then it is possible that your device is not class compliant, however you could try turning off the power and start again.

Some USB MIDI devices have two modes of operation and can be set to operate in Class Compliant mode even if this is not the default. The Class Compliant mode might be called "generic driver", the other mode may be called something like "advanced driver". Consult the device manual to see if the mode can be set for Class Compliant.

If you unplug then re-plug the USB cable while it is powered the device might reconnect, but it is not certain.

Power

It is essential to use only the supplied 5V regulated power adaptor. Applying a voltage higher than 5V to the MIDI USB Host will probably not damage the MIDI USB Host itself, but it could damage any attached USB device as the 5V is passed on to the attached USB device for buss power. There is protection circuitry inside the MIDI USB Host to protect against reverse polarity and over-voltage, but these should be treated as a last resort and are not guaranteed to prevent damage to an attached USB device in the event of over-voltage as the USB buss voltage could rise to 6.5V before being clamped.

Care should be taken to ensure that power adaptors for other pieces of equipment are not accidentally plugged into the MIDI USB Host.

If the input voltage rises above 6.5 volts then power will be shut off. The LED will go out and the unit will not operate again until power has been removed for at least 60 seconds. This allows time for the thermal fuse to reset.

The following Yamaha keyboards ar known to be class compliant and therefore should work OK:

PSR-E353, PSR-E443
PSR-S670, PSR-S770, PSR-S970, PSR-A3000, TYROS-5
NP-12, NP-32
DGX-650, DGX-660
P-105, P-115, P-255

The following keyboards are known to incorporate a USB hub and therefore will only work with firmware v2005 or later (s/n N6-2421 and above) for the MIDI USB Host:

Korg Microkey 61
Korg Microkey 49
Korg Microkey 37

Power: 90mA, USB mini-B socket - leaving 910 mA available for the attached USB device
Dimensions: 110 x 55 x 32 mm
Weight: 100g (excluding power supply)
MIDI: 1x IN, 1x OUT - both 5 pin DIN
Power Supply: 5V DC / 1 Amp regulated - (never use an unregulated supply as unregulated supplies typically give a higher output voltage than shown).

This product is supplied with a multi-region power supply which is suitable for use in the UK, EU, US/Canada and AUS/NZ.

Notes: 'Nude' super-elliptical stylus of just 7.6 x 18 microns (0.3 x 0.7 mil), cut and polished from a single homogeneous piece of diamond. This makes for a lower effective tip mass of improved rigidity, which in turn means its ability to retrieve high-frequency detail is dramatically improved when compared to the 'bonded' elliptical stylus alternative. It's far less likely to 'mis-track' or overshoot when tracing high-frequency groove modulations, and because of its finely polished 7.6-micron profile it can more effectively fit into closely packed inner grooves. Lowerdistortion, improved transient response and a flat frequency response all contribute to superior fidelity when compared to any price-comparable alternative.

Technical specifications

Frequency Range 20 Hz - 20 kHz
Channel Balance < 1.5 dB @ 1 kHz
Channel Separation > 20 dB @ 1 kHz
Sensitivity 3.5 mV (1 kHz @ 5 cm/s)
Static Compliance 20 mm/N
Vertical Tracking Angle 20-
Stylus Radius 7.6 micron (0.3 x 0.7 mil)
Stylus Type Nude eliptical
Load Resistance 47 kO
Load Capacitance 100- 200 pF
Internal Inductance 400 mH
Internal Resistance 410 O
Cartridge Mass 6.9 g
Fixing Centre 12.7 mm (0.5 in)
Playing Weight 1.5 - 2.5 g (1.75 g recommended)

Notes: The WHITELABEL is SHURE's Flagship DJ Phono Cartridge that has redefined and set a new standard in the DJ Industry.

With the N-WHLB NUDE, JICO provides a replacement stylus manufactured for the legendary SHURE WHITELABEL Cartridge.

Additional information

Manufacturer: SHURE
Cantilever: Aluminium
Cartridge number: WHITELABEL
Colour: DK / BLUE
Tip: NUDE Conical Stylus
Tracking Force: 1.5 - 3.0 g
Type: Moving Magnet

Notes: Loci Tripl3

A Tripl3 is a combination of a Classic and Doubl2 stands allowing 3 angled tiers
Can be used as separates, flipper over for other options or combined with additional stands.
Assembled in seconds
Super strong
Precision laser cut from 6mm oak veneer
Non-slip bands
Packs flat to slide in your case.

Notes: The ODR-1 30th Anniversary Overdrive - Limited Gold Sparkle Edition commemorates three decades since the pedal's introduction in 1993.

Ideal for blues and crunchy rock sounds (or for that extra punch when soloing), the Nobels ODR-1 has been the first choice and secret weapon for many players and top studio guitarists for 30 years. To celebrate this milestone, Nobels have produced a very special gold sparkle finish edition and added a new versatile and convenient Bass Cut Pot for more even more tonal flexibility.

Limited to 5000 units worldwide, each pedal is numbered and includes a certificate, a sticker, a special plectrum and features the original ODR-1 front cover design.

The top selling ODR-1 pedal has developed its own almost cult following since it was first designed and engineered way back in the eighties. At NAMM 2020, the pedal was upgraded to the now current ODR-1BC model. With the addition of a (much-requested) bass cut switch to help tame low end (if needed for humbuckers etc.) as well as newly developed power circuitry for enhanced headroom, it makes the pedal way more versatile for the modern age.

However, in celebration of three decades of Natural Overdrive, the ODR-1 30th Anniversary Overdrive now features an even more useful and convenient variable Bass Cut Pot, based on feedback from musicians around the world. It also retains all the other upgraded features from the BC model such as higher headroom and Glow-in-the-Dark knobs, as well as Nobels' Spectrum control- one of the most important ingredients of the original pedal's success.

The very special gold sparkle finish makes this edition look as stunning as it sounds and only a limited number of ODR-1 30th Anniversary Overdrive pedals will be released, just 5000 worldwide.

So grab a piece of legendary overdrive history while you can!

Notes: Modern classics. Open-backed design means they leak some sound but give a really clear impression of your music. Solid option for production work and mixing.

Supplier notes:
The DT 990 PRO is an open dynamic headphone for studio applications. Due to a weight reduction of the diaphragm an excellent sound reproduction quality is achieved. Its rugged design with a spring steel headband ensures a secure fit and withstands all demands. Soft headband and ear cushioning systems ensure a high comfort over long periods of time.

Beyerdynamic's DT PRO headphone series has it's roots in the early 1980s. Since then, millions of audio professionals from all parts of the world have become loyal users of beyerdynamic products. The series has been designed to cater for listening in a wide variety of environments, thanks to different headphone construction.

Notes: UDG presents the Urbanite Series, cutting edge bags for today's on-the-go DJs / Producers. Each design not only makes you feel good, they make you look great. The Controller Sleeve lets you take a wide variety of your essential gear for your digital set up from one gig to the next. The main compartment includes high-density egg-crate interior padding that protects jog wheels, faders and buttons of various sized equipment. It lets you safely store your digital controller (such as the Pioneer DDJ-REV7, XDJ-RX3, XDJ-XZ, XDJ-RX2, DDJ-RZ, DDJ-SZ2, Numark NS7III) in the main compartment. The UDG Controller Sleeve is available in 3 sizes: Medium, Large & Extra Large skilfully designed to fit many different models of equipment safely during transport.

Specifications

Colour: Black
Weight: 2,90 kg / 6.38 lbs
Outer Dimensions (W x H x D): 92.2 x 49.2 x 13.5 cm | 36.3 x 19.4 x 5.3 inch
Inner Dimensions (W x H x D): 89.2 x 46.2 x 10.5 cm | 35.1 x 18.2 x 4.1 inch
Material: Water repellent laminated 600D Polyester exterior
Protection: Egg Crate interior protects jog wheels, faders & buttons
Adjustable foam inserts to customize main compartment to your gear

Extras

Easy grip zipper pulls
Convenient carry handle
Padded shoulder strap

Fits

Pioneer DDJ-REV7, XDJ-RX3, XDJ-XZ, XDJ-RX2, DDJ-SZ2, DDJ-RZ, DDJ-SZ, XDJ-RX
Numark NS7III/ NS7II/ NS7 FX
Denon DJ MCX8000
Or similar size controllers

Notes: The DigiTechr Drop is a dedicated polyphonic drop tune pedal that allows you to drop your tuning from one semitone all the way down to a full octave. Get down-tuned chunk without having to change guitars! The Drop also features a momentary/latching switch. With the switch set to momentary, you can turn the Drop into a true performance pedal. Fast trills and roller-coaster pitch dips are at the tip of your toes.

General Specifications
Input1/4" Unbalanced (Tip-Sleeve)
Output1/4" Unbalanced (Tip-Sleeve)
ControlsAmount, Momentary On/Off
A/D/A Converter24-bit
Sampling Rate44.1 kHz
Power SupplyPS0913DC-01 (US, JA); PS0913DC-02 (EU, AU, UK)
Drop Tune Range1-7 Semitones Down, Octave Down, Octave Down + Dry
Dimensions
Length4.75"
Width2.875"
Height1.75"
Weight0.36 lbs.

Notes: Mackie Mix Compact Mixers deliver the quality you expect from the world leader in compact mixer design.

The professional and affordable Mix Series mixers feature high quality components, a rugged metal chassis and features designed for a variety of applications. With Mackie preamps and proven high-headroom, low-noise design, Mix delivers great sound from any source.

Besides, wouldn't you rather Mix on a Mackie?

Notes: DJ mixing controller

Ultra-portable setup for TRAKTOR DJ 2 (desktop) and TRAKTOR PRO 3
Pro-quality knobs, faders, and backlit buttons
Mixing interface with 3-band EQ, built-in 24-bit soundcard

World's smallest pro DJ mixer

TRAKTOR KONTROL Z1 is the ultra-compact 2-channel mixer, controller, and soundcard for TRAKTOR DJ 2 and TRAKTOR PRO 3.

EQs and filters

Tweak your sound with robust 3-band EQ, gain, and filter knobs.

Cue section

Pre-listen to each channel. The Cue Mix knob adjusts the cue/master balance. The Cue Volume regulates headphone volume.

Channel faders

Mix effortlessly with pro-grade faders. The easy-to-read level meters provide instant visual feedback.

Club ready

Mix and pre-listen to your tracks with pro precision. Dedicated controls for two channels give you intuitive, tactile control over volume, EQ, filters, and effects. And the built-in 24-bit audio interface delivers powerful, high-quality sound.

Hook it up to your laptop and start playing - wherever you are.
Traktor Pro- on-the-go

TRAKTOR KONTROL Z1 also offers ready-to-go compact control of TRAKTOR PRO EQs, filters, and FX Units on two channels at a time, keeping you ready for the afterparty - always.

It doesn't end there: Expand your creative possibilities by adding TRAKTOR KONTROL X1 to the rig and control effects, loops, and transport functions like play and sync.

What's included

TRAKTOR KONTROL Z1 comes with the introductory TRAKTOR LE software to get you started. Two software decks, three effects, and all you need to get the party going.

And when you're ready for more, go pro. The Z1 includes a e-voucher - use it to purchase TRAKTOR PRO 3 or any other downloadable NI software.

Specifications

System requirements

macOS 11, 12, 13 (latest update), iTunes 12 (latest update), Intel Core i5 or Apple M1 / M2, 4 GB RAM

Windows 10, 11 (latest service pack), Intel Core i5 or equivalent CPU, 4 GB RAM
Supported audio formats: MP3, WAV, AIFF, Audio-CD, FLAC, Ogg Vorbis, non-DRM AAC

Supported drivers

ASIO
Core Audio
DirectSound
WASAPI

General

Monitor with 1280 x 800 screen resolution, USB 2.0, 1 GB free disc space. An internet connection and a graphics card which supports OpenGL 2.1 or higher are required to download and activate TRAKTOR software. Once installed and activated, all products can be used offline.

Dimensions: 120mm x 293mm x 51mm (WxLxH), 0.65 kg / 1.43 lbs

Hardware

Overall:
Sampling rate: 96kHz
Converter wordlength: 24-bit
Analogue output channels: 4
USB audio interface: USB 2.0 hi-speed, audio class compliant

Master RCA outputs:
Maximum output level (unbalanced): +12 dBu
Noise floor: -89,3 dB a weighted
Dynamic range: +102 dB a weighted
THD+NL: 0.005% (@0dB FS/10k)
Frequency response: 20 Hz-20 KHz, +/- 0.6 dB
Crosstalk: -118 dB (1 kHz)

Headphone output:
Maximum output level: +11 dBu into 300 Ohms @ 0 dB FS
Maximum output power: 2x 25mW
THD+N: 0.05% at 0 dB FS (300 Ohms load)
Noise floor: -94 dBu
Dynamic range: 101 dB
Frequency response: 20Hz - 20 kHz, i 0.6 dB
Crosstalk: -62dB (1 kHz)

Notes: There are lots of good reasons why these are some of the most popular studio headphones on the market. Clear sound, comfortable and good isolation. Perennial favourites from Japanese headphone specialists Audio-Technica.

Supplier's notes:
This is the most critically acclaimed model in the M-Series line, praised by top audio engineers and pro audio reviewers year after year.

The ATH-M50x features the same coveted sonic signature, now with refined earpads and detachable cables.

From large-aperture drivers to sound isolating earcups and robust construction, the M50x provides an unmatched experience for the most critical audio professionals.

This product includes interchangeable coiled and straight cables, a carry pouch and a 1/4" jack adapter for universal compatibility.

Notes: The MIDI Solutions Footswitch Controller provides a 1/4" phone jack input for connection to a footswitch or contact closure which can be used to trigger MIDI events (for eight footswitch inputs in a single rack space unit, see the MIDI Solutions F8). Triggered MIDI events are merged with incoming MIDI messages and sent to the MIDI output of the Footswitch Controller.

Triggered event types are programmable and include: Note, Control Change, Pitch Bend, Program Change, Start/Stop, System Exclusive

Other functions include: Program Change INC/DEC, Rechannelize, Transpose, Tap Tempo, Note-on Filter

MIDI Echo and Footswitch Toggle parameters are selectable on/off.

The Polarity of the footswitch can be determined automatically on power-up, or programmed to normally-open or normally-closed.

The Footswitch Controller is programmed by sending it MIDI System Exclusive messages (see FAQs - Programming). This can be done easily with the Processors Programming Tools software. Once programmed, its settings are retained even after power is removed. The Footswitch Controller can be reprogrammed with new settings as often as needed.

The Footswitch Controller is MIDI-powered, and requires no batteries or power supply to operate with most MIDI products (see FAQs - Power and FAQs - LED for more information). A MIDI indicator LED lights up when the product is powered and flashes when MIDI data passes through it.

Notes: The UDG Ultimate DIGI Backpack Black/Orange Inside is specially designed to cater for the laptop-based generation DJ affording them maximum functionality with performance orientated style.

Fits: Pioneer DJM-S5, DDJ-XP2, DDJ-200, Akai MPC Live II, NI Maschine MK3/ Jam, Numark Scratch, PT01 Scratch, or similar size controllers.

Ultimate DIGI Backpack specially designed for the laptop DJ. Constructed from high quality water resistant Nylon, it contains a cleverly designed side entry compartment for a laptop up to 15.4" without having the hassle of going through the main body of the bag. The bag main compartment can hold an extra laptop and it can also hold a Native Instruments MASCHINE MK2 size MIDI controller. There is a detachable interface pouch and on top of the bag there is a padded, quick access headphone pocket. There are 5 zipped compartments to securely store USB sticks, SD cards, wires and cables, AC power adapters, compact camera's, MP3 player, and other accessories.

Specifications

Colour: Black, Orange inside
Weight: 1,80 kg / 3.96 lbs
Outer Dimensions (W x H x D): 43.0 x 31.0 x 28.0 cm | 16.9 x 12.2 x 11.0 inch
Inner Dimensions (W x H x D): 42.0 x 30.0 x 13.0 cm | 16.5 x 11.8 x 5.1 inch
Material: Water Resistant Nylon 450D
Protection: Various padding used

Extras

Front compartment with organization panel and detachable pouch for audio interface
5 exterior pockets for personal essentials, including one with earbud pass-through for Mp3 players
S-curved shoulder straps for ultimate comfort.

Fits:

Up to 15.4" laptop, LP's
Pioneer DJM-S5, DDJ-XP2, DDJ-200, DDJ-XP1, DDJ-SP1, DDJ-WeGO 3/ 4, Toraiz Squid
NI Maschine MK3/ Jam/ MK2
Denon DJ MC2000, SC2000
Akai MPC Live/ II, MPD226, MPD232, MPD32, MPD26, MPK Mini MK II, MPC Element, MPC 500, APC 20, APC Key 25
Ableton Push/ 2
Allen & Heath Xone 23/ C, Xone 43C
Novation Launch Control XL, LaunchPad Pro, Circuit, Twitch, Numark Scratch, Omni Control, Stealth Control, Party Mix, iDJ Live II, Mixtrack Edge
Reloop Beatmix, Digital Jockey III/ II, Mixage IE, Neon
Roland Aira MX-1, TR-707, MC-202, TR-8, TR-8S
Korg MicroKey 25
M-Audio Oxygen 25, Trigger Finger Pro,
Arturia Drumbrute
Gemini FirstMix Pro, Slate2, Slate4, CDJ-700,
Hercules P32 DJ Controller, Universal DJ, DJ Consule 4-MX, DJ Control Air S, DJ Control Wave, DJ Control Instinct
Livid CNTRL:R
Stanton DJC.4
Vestax Spin 2, VCI-300/MK2, VCI-100/MK2
Audio interface or MP3/MP4 player, books and magazines

Notes: "Old school tube mellow" is the phrase most often used to describe the sound of the V67G. Designed mainly for vocals, the V67G combines Class A FET circuitry and a transformer-coupled output resulting in a pure and warm sound. Its classic green body and gold plated grill provide stunning good looks. The V67G adds body to vocals for all styles of music. This top-seller has been used on countless recordings and is a welcome addition to your microphone collection.

Classic FET design with warmth and midrange makes this mic perfect on both drums and vocals
Perfect addition to any mic locker adding "classic" character to ordinary sources
Transformer balanced output ensures more of your source and less noise

Technical specifications:

Mic type: Condenser microphone
Capsule: 32mm capsule with Gold-sputtered, 6 micron diaphragm
Frequency response: 20 Hz - 20 kHz
Polar pattern: Cardioid
Sensitivity: 15mV/Pa
Impedance: 200 ohms
Equivalent noise level: 20 dB (A-weighted IEC 268-4)
S/N Ratio: 74 dB (Ref. 1 PA A-weighted)
Max SPL for .5% THD: 130 dB
Power requirements: 48V Phantom power

Size and weight:

47 mm x 184 mm / 1.85 in. x 7.24 in.
590g / 1.3 lbs

Metal finish: Green with gold grill

Included accessories: MT-001 hardmount

In the box:

MXL V67G Mic
Hard Mount Mic Stand Adapter
Carrying Pouch

Notes: Are you and your session players and bandmates tired of straining to hear underpowered headphones? That's why Jim Odom and his jambalaya-fueled team of engineers designed 150 mW headphone amps for the HP4 headphone-distribution system.

These headphone amps are not just loud enough for session and stage use, they're loud enough to explode the oysters in a Po' Boy sandwich. Yet the sound is clear and clean, with a wide dynamic range. At last, everybody will be able to heariassuming they are capable of hearing. Be careful with that level control.

Simplicity is the HP4's hallmark. You get left and right line inputs, left and right line outputs with level control, and the 4 x headphone outs. You can globally mute the headphone outs, adjust the overall headphone level, sum the stereo signals to mono, and mute the rear-panel Monitor outputs.

The HP4 can sit on a tabletop or can be screw-mounted to a standard rack tray (not included), where it requires just 1/3 rackspace. And if your needs grow, you can use the line outputs to feed the inputs of a second HP4 or an HP60. Chain as many headphone systems as you need.

So listen up. Quit struggling with mediocre headphone amps. Get the HP4 and hear everything loud and clear. You owe it to your music.

www.youtube.com/watch?v=GOt3LDMtsFM

Notes: When the pros need an EQ, they turn to dbx. With a proven track record that spans four decades, the dbx EQs are the industry standard for touring, studios, and audio installations. With the dbx heritage of revered pro EQs, the 131s meets the needs of the most demanding sound reinforcement environments, while offering the simplicity of straightforward controls.

The dbx 131s includes a single 31-band channel of 1/3-octave equalization, 12 dB input gain, switchable +/-6 dB or +/-12 dB boost/cut range, 20mm nonconductive sliders, an intuitive user interface, and output level metering. From its extended 10Hz to 50kHz frequency response and 110 dB dynamic range to the quality componentry and meticulous attention to detail, the 131s offers exceptional sound and rugged reliability that guarantees you will always sound your best.

Sure to find a home in the studio, on tour and with installed sound venues, the dbx 131s is destined to take its rightful place in the lineage of great dbx signal processors that are the professional's choice in signal processing. With such affordable quality, there's no longer any excuse for compromising your sound.

Notes: The Korg Volca Keys is an ideal introductory synthesizer, with a simple, yet powerful polyphonic analog sound engine and loop sequencer.

The Volca Keys is a long awaited synthesizer that adds a new chapter to the long and storied history of Korg's analog synthesizers. This 27 key analog lead synth delivers unbelievably powerful sound in a compact body. Starting with a filter section that uses the circuitry of the legendary miniKORG700S (1974), it delivers astonishing sound that takes full advantage of Korg's half-century of know-how in circuit design.

With a simple structure that includes delay effect and a sequencer, it's also an ideal choice for a first analog synth. It offers the richly expressive sounds that are distinctive of analog, providing the enjoyment of simple yet deep sound-creation. The possibilities are endless; you can use the three oscillators to play chords, use them in unison with detune to produce solid lead lines, or apply ring modulation to create far-out metallic sounds.

The Voicing function makes it easy to specify how the three oscillators will be combined. Choose between poly, unison, octave, fifth, unison ring or poly ring simply by turning a dial. Easy for those taking thier first steps into synthesisers, the Volca's simple design makes it easy to obtain a wide variety of sounds.

Record phrases as you play them with the Volca Keys using the loop sequencer. With up to 16 steps, it's easy to create phrases as they come to mind. Use the overdub recording function to produce complex loops, with up to 8 sequence patterns able to be stored in internal memory. Craft your loops with the motion seqence function, apply time varying changes to your sound to enhance loops and add originality to your life performances.

Skip a step during sequence playback with active step, a function that creates effects similar to a short loop or unexpectedly irregular rhythms. This allows you to create a dynamic performance just as though you were performing the sequence itself. Flux function lets you play back the phrase without quantizing the steps, producing a loop with a distinctive sense of groove.

A useful self-tuning function constantly tunes the oscillators, so you never need to tune during a performance or wait for the pitch to stabilise after turning the power on.

Connect the Volca Keys with the rest of the Volca Series or a Monotribe using the sync jack. A MIDI in connector lets you synchronise with other devices, play the Volca from any MIDI keyboard and send note messages from your DAW.

The Volca Keys analogue loop synth has a compact size and a built-in speaker, easily playable anytime, anywhere. The ideal starter-synth.

http://www.youtube.com/watch?feature=player_embedded&v=7rbcYJ326EI

Notes: Peerless beats generated by solid analog drum sounds and an Electribe-style sequencer.

A vintage-style analog drum machine from Korg's recently announced Volca series. The Volca Beats includes a 16-step sequencer and 6 x editable analog parts including kick, snare, Hi/Lo toms and open & closed Hi-Hats designed to provide sounds reminiscent of classic 80s drum machines. It also has an additional PCM engine which is said to produce 4 x Lo-Fi percussion sounds including clap, claves, agogo and crash sounds.

There is one-knob-per-function parameter control for crafting each of the six analog sounds including click, snappy, pitch, decay and grain. The PCM sounds have control over pitch and speed. There is also a Level knob allowing volume adjustment of each part.

The 16-step LED-lit sequencer has 8 x memory locations for saving patterns. It includes a recordable stutter function for generating repeated triggers (or drum rolls) and delay effects, an active step feature for quickly adding or removing individual steps, and a step jump function that will instantly play any step. Notes can be entered live as the sequencer is running.

You can also wirelessly synchronise playback of all of the units in the Volca series with any iOS music app that support Korg's Wireless Sync-Start Technology (WIST) using their SyncKontrol iPhone app. This also allows control of the swing settings and fine control of the tempo (including tap tempo).

The Volca Beats is battery powered (with optional AC power) and includes a built-in speaker. It weighs in at only 372g with dimensions of 193 × 115 × 45 mm (W x D x H).

The Volca Beats editable controls include:

Kick (click, pitch, decay, level)
Snare (snappy, pitch, decay, level)
Hi/Lo toms (hi pitch, low pitch, decay, level)
Open/closed Hi-Hat (closed decay, open decay, level)
PCM sounds (pitch, speed, level)

Notes: Classic closed-back headphones in a low-impedance version designed to play nicely with outputs on phones, laptops and interfaces. One of the best all-round options for production.

Supplier's notes:
The Beyerdynamic DT 770 Headphones 80 Ohm are closed back dynamic headphones that use the same comfortable, sound isolating design as the 250 Ohm studio version, but with a lower resistance for general purpose and mobile applications. Because of the lower resistance, the DT 770 Pro 80 Ohm headphones are louder and work on low power devices such as smart phones, MP3 player, laptops and bus powered interfaces. Therefore, if you are working in a loud environment or using a battery operated device, the Beyerdynamic DT 770Pro 80 Ohm headphones make the perfect choice of headphone.

When out and about, you really need to block as much ambient noise out as possible and a lot of headphones do this by clamping the ear-pads as tightly to your ears as possible and using materials that absorb a lot of sound. This produces two unwanted issues; discomfort, after prolonged use; and a loss of audio quality as sound being generated by the driver is absorbed by the cup. The DT 700 Pro series avoids this by using a clever bass reflex system and a large circumaural cup design with velour pads. Of course the real technology is in the transducer itself, which produces a nominal frequency response of 5Hz to 35kHz and a nominal SPL of 96dB, an exceptional performance.

Notes: The DJ200i is the premium DJ cartridge from hi-fi specialists grado. Hand engineered for a premium quality, rich, warm and unique sound, the DJ200i is built and designed to meet the demanding needs of the professional DJ. A step above anything else in this price bracket, and many cartridges priced significantly higher.

The grado specially engineered transmission line cantilever allows for the ideal transfer of music signal and for safe and effective stylus back-cueing. The prestige model DJ200i uses a modified 4 piece otl cantilever technology, oxygen free wire in the coils and a specially designed, high polished, diamond mounted in a brass bushing for possibly, the most advanced DJ cartridges ever offered to the professional DJ market.

Notes: Introducing the SD808, part of our new series of drum modules that brings analog percussion to the modular synth world, instantly turning your system into a self-contained music machine.

The SD808 is the TR-808's analog snare drum circuit adapted for use in Eurorack modular synthesizer format and was designed to sound like a fresh-out-of-the-box, 1980s TR-808 snare. Adapting the circuit to the modular format has allowed us to add special features like independent accent levels, a high-powered gain stage, a dual-input pulse-shaper, and an adjustable noise source - all without compromising the signature sound of the TR-808 snare drum.

The SD808 sounds tight and extremely snappy because it's analog - the real thing, not samples. The sound is made with three analog sound generators mixed together: two oscillating sine waves and a noise source. The SD808's front panel controls have a lot of sweet spots with sounds that are not just limited to snare drum sounds; it can also create other electronic percussive elements.

The noise source generator in the original TR-808 machines were revised in later production batches, resulting in variations in sound across the production run. The SD808 uses this later, revised circuit to create a snare drum hit that is slightly darker, has more body, and is more realistic. Just like other drums in this series, the SD808 includes a high-powered output gain stage capable of producing signals up to 20Vpp, allowing you to get an array of harmonized snare drums sounds with even tighter attacks. On the inputs, we have designed a dual-input pulse-shaper circuit so you can trigger the SD808 with Trigger/Gate signals from step sequencers, clock dividers, or any other pulse/clock sources. This eliminates the need to shape pulses sent to the module and ensures the same stable sound at peak power, regardless of your pulse source. All these unique features make integrating this legendary sound generator into your modular synth easy, unleashing the power of real analog drums.

Notes: Introducing the HATS808, part of Tiptop Audio's new series of drum modules that bring analog percussion into the modular synth world, instantly turning your system into a self-contained music machine.

The HATS808 is the TR-808's real, analog closed and open hi-hat circuits adapted for use in Eurorack modular synthesizer format and tested to sound just like it did back in the 80's. Adapting to modular foramt has allowed Tiptop Audio to add some special features for each voice, like independent accent levels, a high-powered gain stage, and a dual-input pulse-shaper. Filter Q and VC-Q knobs were added to the main band-pass filter for additional tuning and to allow you to generate crushed tones and self-oscillation at the knob's max position - all without comprimising the signature sound of the TR-808 hi-hats.

The HATS808 sizzling sound is made using six analog square wave oscillators mixed and processed by band-pass filters. This multi-oscillator design is what give the 808 hi-hat sounds their unique metallic character and akes each HATS808 sound slightlty different from one-another. The original "choke" circuitry that makes it sound so dynamic and tight is fully implemented, just like the original, but can also be disabled if needed, by disconnecting the internal connection between the two hats.

Just like the other drums in this series, the HATS808 high-powered output gain stage allows you to further harmonize the sound using distortion and clipping. On each input, there is a dual pulse-shaper circuit so you can trigger your HATS808 with Trigger/Gate signals from step sequencers, clock dividers or any other pulse/clock sources. This eliminates the need to shape pulses sent to the module and ensures the same stable sound at peak power, regardless of your pulse source. All these unique features make integrating this legendary sound generator into your modular synth easy, unleashing the power of real analog drums.

Notes: The CP909 is the TR-909 clap sound analog generator in Eurorack format. This is yet another low-cost analog drum generator from a legendary drum machine in your modular synthesizer, expanding your Tiptop Audio modular drum machine even further.

The CP909 is an exact reproduction of the original analog circuit and, with the addition of just one extra knob, "trashing" the frequency of the internal noise generator, we have added greatly to the spectrum of sounds that can be generated - all that without compromising the signature sound of the TR-909 clap.

The CP909 clap effect is made by a special triple-saw envelope generator that controls the gain of a VCA. The sound source feeding into the VCA is made by a quasi-random logic based noise generator; some might call it "digital noise" though this term might be misleading in today's world of microcontrollers and sound samples. What really makes the noise generator is a ring of logic gates, so primitive, so BO's, and that's the sound of the 909 Clap!

The CP909 includes a high-powered output gain stage capable of producing hot signals. On the inputs, we have designed a pulse-shaper circuit so you can trigger the CP909 with trigger/gate signals from step sequencers, clock dividers, or any other pulse/clock sources. This eliminates the need to shape pulses sent to the module and ensures the same stable sound at peak power, regardless of your pulse source. Based on the architecture of the 909, the Accent input is versatile and able to take in both CV and Gate signals for continuously changing dynamics. All these unique features make integrating this legendary sound generator into your modular synth easy, unleashing the power of real analog drums.

Notes: The Happy Ending Kit is an easy way to get everything needed to start a Eurorack modular system.

The Happy Ending Kit includes:
1 x Z-Rails set plus screws to attach to Z-Ears
1 x uZeus 4HP PSU with 2 x flying bus boards
1 x UK 3-pin mains adapter

Notes: The Innofader Pro2 is the ultimate replacement audio fader. It gives you an ultra precise i 0.05mm cut-in accuracy for even tighter control of your scratches. Separate left and right cut controls make it easy to adjust without the need to recalibrate. And for the perfectionist in you, it even has super precise presets which allow you to do things like shift the cut point by a mere 0.04mm, less than even the thickness of your hair.

Thanks to the feedback of customers like yourself, the Pro2 now fits more mixers than ever, all without modification. The adapter boards are already insulated and marked clearly to show you the specific one you need for your mixer.

To take advantage of all of the Innofader Pro2 adjustability, we recommend you purchase an Innojuster. This allows you to access Innofader Pro2 control dials plus the calibration button from outside the mixer.

Notes: Capture a frozen moment and turn it into a tonally unique sonic foundation. The Freeze Sound Retainer delivers infinite sustain of any note or chord at the press of a momentary footswitch. Release the footswitch and you are again sample ready.

Three selectable decay rates, including a latch mode, guarantee liquid, smooth tonal transitions.

Hook the Freeze up with your favorite pedals for a sonic collage that will be unlike anything you have ever heard.

It's like adding an extra musician to the band.

*UK230V power adapter included*

Notes: Analogue delay with extensive controls and tap tempo all in an affordable package!

The EHX Deluxe Memory Boy Analog Delay's Quality ICs deliver warm and organic analog tones while "tap tempo" allows you to always be in sync with the groove. Choose five note divisions for metronomic variances. Sweet modulations can add lush ambience while the expression pedal input gives you external control. The Deluxe Memory Boy is the most flexible, affordable analog delay ever designed.

Tap Tempo
Tap Divide timing subdivisions
Expression pedal input for flexible control
Triangle and square wave modulation with adjustable rate and depth for superior chorus, vibratos and sweeps
Total analogue bucket brigade design
Built in EFX loop
Total Analog bucket brigade design
Power adapter included

Specifications

Circuit
Analogue: Analogue w/ Digital Control
Bypass: True Bypass
Audio: Mono
Effects Loop: Yes
Power Supply: 9.6VDC-200mA power adapter included
Dimensions (in): 5.75 x 4.75 x 2.5
Current Draw: 100mA
Year Released: 2010

Notes: Not a noise gate, and not a noise suppressor -- but a real hum extractor!

Every musician battles hum in their signal chain. The EHX Hum Debugger turns it into dead silence, courtesy of a little Electro-Harmonix magic.

No matter what type of pickups you use or how loud you play, the Hum Debugger will clean up your signal chain so that hum will no longer overtake your guitar signal. Simply connect the Hum Debugger to your guitar like you would any other effects pedal and you are ready to eliminate hum from your sound forever!

True bypass
Absolutely eliminates hum from any audio source
Tough and compact die-cast chassis
Power adapter included

SPECIFICATIONS
Circuit
Digital
Bypass
True Bypass
Audio
Mono
Power Supply
7.5VAC-400mA power adapter included
Dimensions (in)
4.75 x 4 x 2.25
Current Draw
125mA(AC)
Year Released
2007