Juno Daily

Music and tech news, interviews, features, reviews and more.

Visit Juno Daily

安全购物

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

安全购物

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.  Visit Juno DJ

首页  Coming Soon  

DJ Equipment

Options
Items 1 to 50 of 166 on page 1 of 4
1  2  3  4  »
FORTHCOMING
IDYD Acid Face 12 Inch Turntable Slipmats
Cat: 825716
 
16oz felt turntable slipmats
Notes: Full Colour Custom Printed Turntable Slipmats, printed using a high resolution printer, the results will not disappoint.

These are considered the go-to slipmats for printers and turntablists- a hybrid slipmat with a unique glazed bottom surface.

These slipmats are compressed with enough thickness and density to accommodate the speed and accuracy of a Scratch DJ, without having the needle bounce when touching the vinyl.

The Mix/Club DJs using these hybrid glazed slipmats would get the absorbent feel and gain the speed along with the accuracy of a Scratch DJ.

These slipmats also work perfect for any vinyl/collector home turntablist.

Professional Grade Slipmats for 12" Turntables
Weight: 16oz Felt
Bottom Surface: Glazed
Thickness: 0.09" (3/32")
Read more
coming soon $12.74
FORTHCOMING
Pioneer DJ VM-70 Active Monitor Speaker
Cat: 821663
 
Active 6.5" DJ/studio monitor speaker
Notes: The active VM-70 produces clear audio with fast-attacking, punchy bass. The speaker can be tuned to suit the characteristics of any room, making it perfect for recreating a club sound when you're DJing or providing a flat frequency response when you're producing music in a home or professional studio setting.

Every VM series speaker includes a Class D amplifier with 96 kHz sampling DSP to enable wide-bandwidth audio reproduction. Its highly efficient performance results in low distortion and high-energy sound. The 4-mm-thick rigid aluminum front baffle further suppresses resonance and vibrations, delivering sound that's authentic to the original source.

Aramid fiber woofer cones provide outstanding punch that you'll feel in the bass and low-mid frequencies. These newly developed cones are 30 percent lighter than conventional paper-lined Aramid cones, making them stronger with deeper sound.

The Vortex Bass Accelerator ensures that low-end audio is tight and free from unwanted vibrations, as ribs in the bass reflex port mean that air flows freely from the speaker to deliver pure sound.

Mid and high-frequency sounds are delivered with power thanks to the constant directivity horn, which also creates a broad, uniform listening space. The shape of the horn and the woofer edge are specially designed so the flat playback frequency crosses over to the tweeter easily, resulting in a natural sound.

All VM series speakers are voiced flat to ensure you hear the natural sound of the music. To help you tweak the output and find the sound that's perfect for the room you're working in, each speaker includes DSP settings. On the rear panel, you'll find 2 knobs: Low EQ and High EQ. Without needing to look, you can click the knobs into 4 different positions each, giving you 16 possible EQ settings that are simple to engage. Choose the one that sounds best for DJing or producing music in your home or studio, depending on the shape, size, and construction of the room.

The brand-new design of the hexagonal aluminum front baffle brings a fresh look, as well as improved sound quality and durability. It cuts down unwanted vibrations for lower distortion while the tweeter protective guard reduces the risk of damage to the high-frequency diaphragm. And the Alumite treated brushed texture gives the speakers a professional finish so they look right at home next to Pioneer DJ gear.

Specifications:
Width: 229 mm
Height: 341 mm
Depth: 312 mm
Weight: 7.7 kg
Maximum Sound Pressure: 112 dB
Amplifier Output: Class D with 96kHz DSP
LF: 70 W / 4 O
HF: 30 W / 4 O
Frequency Range: 37 Hz - 36 kHz Hz
Impedance: 10 kO
High EQ: 4 selective EQs
Low EQ: 4 selective EQs
Cross Over Frequency: 3 kHz
Power Supply: AC 100-240 V, 50 Hz / 60Hz
Enclosure: Bass reflex
Enclosure material: MDF vinyl laminate
Baffle material: HIPS with 4mm Aluminum Plate

Terminals
Inputs: XLR/TRS combo x 1 (balanced input), RCA x 1 (unbalanced input)

What's in the Box:
VM-70 x 1 (not sold as a pair)
Power cable x 1
Cushioned feet pads x 1 (4pcs/1 sheet)
Precautions for Use
Instruction Manual
Warranty (for some regions)
Read more
MRP:$304.52 SAVE 17%
coming soon $253.77
FORTHCOMING
Numark Party Mix Live DJ Controller With Built-In Light Show & Speakers
Cat: 828673 Rel: 31 Aug 21
 
Compact DJ controller with built-in light show
Notes: It doesn't matter if you're new to DJing or a seasoned professional, the Party Mix Live DJ controller has all of the features you need to rock the party! Simply connect the Party Mix Live to your laptop or mobile device and mix your way through your ultimate party playlist. The built-in speakers allow you fill the room with sound and the integrated LED lights take things to the next level with a beat-synchronized, colorful light show!

Party Mix Live DJ controller with speakers

Access the Latest Music

The days of needing a huge music library in order to DJ are over. With a streaming DJ controller like the Party Mix Live, every hot track is literally at your fingertips! The Party Mix Live comes with Serato DJ Lite software, which includes access to streaming platforms like TIDAL, Beatport LINK, Beatsource LINK, and SoundCloud GO. Craft your playlists on any device, then, when it's party time, access them when connected to the Party Mix Live.

No laptop? No problem! The Party Mix Live DJ controller is compatible with popular DJ iOs mobile apps like Algorridim's djay PRO AI. Simply connect your mobile device to the Party Mix Live using a USB camera connection kit (sold separately) to get the party started.

Built-in Speakers

With the built-in speakers, the Party Mix Live is ready for action without the need to connect external speakers. The speaker on/off switch allows you to fill the room with quality stereo sound or easily turn the built-in speakers off to keep the mix going in your own headphones.

Party Mix Live with speakers and light show

Instant Light Show

The Party Mix Live is the ultimate DJ controller with lights. With the flip of a switch, the built-in light show comes to life! Three multi-colored LEDs and special wide-coverage lenses spread beat-synchronized light beams throughout the room.

Pro DJ Features

Packed with high-end features, the Party Mix Live DJ controller is capable of going from the bedroom to virtually any gig. Four performance pads on each deck allow quick access to effects, cue points, loops, or samples. Next to the Play and Cue buttons on each deck is the Sync button, which automatically matches the tempos of the tracks on each deck for perfectly aligned mixes. A large Filter knob for each deck adds a pro-grade sound to your mixes, and the software-adjustable crossfader allows for smooth fades for mixes or sharp cuts for scratches.

Party Mix Live DJ performance pads

The Party Mix Live also features two large, high-quality, touch-sensitive jog wheels that allow you to manipulate your music with style. Pause, backspin, and even scratch your tracks as you work your way through your playlist. The outer jog-wheel ring functions as pitch-bend so that you can nudge tracks into alignment for the perfect mix.

DJ scratching on Party Mix Live DJ controller

With the Numark Party Mix Live, you'll always be ready for a party, any time and any place!

Outputs:

1 1/8" (3.5 mm) TRS Main output
1 1/8" (3.5 mm) TRS Headphone output

Speakers:

Size: 2 2" (52.5 mm) drivers
Frequency Response: 150 Hz - 20 kHz
Nominal Impedance: 4 O
Power: 5 W (each)

Power:via power adapter

Dimensions: (width x depth x height): 12.8" x 10.1" x 2.6"
325.5 x 256 x 66.4 mm
Weight: 2.69 lb/1.22 kg

Minimum system requirements

Computers/Laptops:

Operating System
macOS Catalina 10.15
macOS Mojave 10.14
macOS High Sierra 10.13
Windows 10

Processor Minimum Requirement: i3: 1.07GHz i5: 1.07GHz i7: 1.07GHz i9: 1.07GHz
Screen Resolution: 1280 x 720
Memory: 4 GB

Mobile Devices:

iPhone: Requires iOS 12.2 or later.
iPad: Requires iPadOS 12.2 or later.
iPod touch: Requires iOS 12.2 or later.
Read more
MRP:$166.86 SAVE 17%
coming soon $139.04
FORTHCOMING
Goldring Exstatic Record Cleaning Brush
Goldring Exstatic Record Cleaning Brush (vinyl record cleaning brush)
Cat: 830574 Rel: 31 Aug 21
 
vinyl record cleaning brush with gold-plated steel and carbon fibres
Notes: Although vinyl records can be a superior sound-storage medium, they are inevitably plagued with a number of drawbacks which affect the sound, not least, the accumulation of environmental dust - a problem which is exacerbated by vinyl's tendency to become charged with static electricity. The very act of removing a record from its paper sleeve will negatively charge it up to a few kV whereupon it immediately starts to attract airborne dust particles which nd their way almost irretrievably into the deepest recesses of the groove.

Traditional mechanical removal processes relying on dry micro-bre cloths not only risk scratching the record surface but also fail to reach far enough inside the record groove and only further increase the static charge on the record. Although a velvet cleaning pad impregnated with anti-static solution can be used, these will only make a record supercially clean by removing some of the surface dust, converting the remaining dirt into a thick sludge which then adheres to the record all the more, attaching itself to the stylus, causing long term record damage and short term sonic distortion.

The Goldring Exstatic cleaning brush solves all these problems in a single application. A double row of thousands of ultra-ne carbon bre laments, each one a fraction of the thickness of a human hair, sweep the nest particles from the very bottom of the groove. Because each of the laments is also electrically conductive and is attached to the conductive brush handle, any static charge leaks harmlessly away to earth. At the same time the velvet pad traps the dust as it is liberated, leaving the record groove spotlessly clean from top to bottom.

The Goldring Exstatic is so effective that the rst few times it is used on older records, an ultra-ne talcum powder type material which has accumulated and remained out of reach of traditional cleaning methods over the years may be liberated from deep within the record grooves to form a line where the brush is removed. It may take several sessions with the new brush before the record is returned to pristine cleanliness, which will persist so long as it is treated with the Goldring Exstatic before each subsequent playing.

Read more
MRP:$34.76 SAVE 17%
coming soon $28.91
FORTHCOMING
IDYD Dove Pill 12 Inch Turntable Slipmats
Cat: 826978
 
16oz felt turntable slipmats
Notes: Full Colour Custom Printed Turntable Slipmats, printed using a high resolution printer, the results will not disappoint.

These are considered the go-to slipmats for printers and turntablists- a hybrid slipmat with a unique glazed bottom surface.

These slipmats are compressed with enough thickness and density to accommodate the speed and accuracy of a Scratch DJ, without having the needle bounce when touching the vinyl.

The Mix / Club DJs using these hybrid glazed slipmats would get the absorbent feel and gain the speed along with the accuracy of a Scratch DJ.

These slipmats also work perfect for any vinyl / collector home turntablist.

Professional Grade Slipmats for 12" Turntables
Weight: 16oz Felt
Bottom Surface: Glazed
Thickness: 0.09" (3 / 32")
Read more
coming soon $12.74
FORTHCOMING
GrooveWasher Walnut Vinyl Record Cleaning Kit
Cat: 835924 Rel: 30 Sep 21
 
Vinyl record cleaning kit consisting of solid milled American walnut handle and Microfiber cleaning pad
Notes: Solid milled American Walnut handle with a waterproof oil polyurethane finish. Hand sanded and rubbed by GrooveWasher's wood artisans; you can feel the woodgrain! This handle will serve you well for decades.

Replaceable Microfiber Cleaning Pad, with velcro on the plexiglass base to secure the pad to the handle. Easy removal for cleaning or replacement.

G2 Record Cleaning Fluid in 4oz bottle with mist spray applicator.

Record label protector mask.

(NOTE: The cleaning photos here are for illustration. This kit does not include the Splash Landing Towel.)
Read more
MRP:$45.89 SAVE 17%
coming soon $38.24
FORTHCOMING
IDYD 2Pac Mural 12 Inch Turntable Slipmats
Cat: 825678
 
16oz felt turntable slipmats
Notes: Full Colour Custom Printed Turntable Slipmats, printed using a high resolution printer, the results will not disappoint.

These are considered the go-to slipmats for printers and turntablists- a hybrid slipmat with a unique glazed bottom surface.

These slipmats are compressed with enough thickness and density to accommodate the speed and accuracy of a Scratch DJ, without having the needle bounce when touching the vinyl.

The Mix/Club DJs using these hybrid glazed slipmats would get the absorbent feel and gain the speed along with the accuracy of a Scratch DJ.

These slipmats also work perfect for any vinyl/collector home turntablist.

Professional Grade Slipmats for 12" Turntables
Weight: 16oz Felt
Bottom Surface: Glazed
Thickness: 0.09" (3/32")
Read more
coming soon $12.74
FORTHCOMING
IDYD Acid Face Tye Dye 12 Inch Turntable Slipmats
Cat: 825733
 
16oz felt turntable slipmats
Notes: Full Colour Custom Printed Turntable Slipmats, printed using a high resolution printer, the results will not disappoint.

These are considered the go to slipmats for printers and turntablists, A hybrid slipmat with a unique glazed bottom surface.

These slipmats are compressed with enough thickness and density to accommodate the speed and accuracy of a Scratch DJ, without having the needle bounce when touching the vinyl.

The Mix/Club DJ's using these hybrid glazed slipmats would get the absorbent feel and gain the speed along with the accuracy of a Scratch DJ.

These slipmats also work perfect for any vinyl/collector home turntablist.

Professional Grade Blank Slipmats for 12" Turntables
Weight: 16oz Felt
Bottom Surface: Glazed
Thickness: 0.09" (3/32")
Read more
coming soon $12.74
FORTHCOMING
IDYD Barcelona 12 Inch Turntable Slipmats
Cat: 826331
 
16oz felt turntable slipmats
Notes: Full Colour Custom Printed Turntable Slipmats, printed using a high resolution printer, the results will not disappoint.

These are considered the go-to slipmats for printers and turntablists- a hybrid slipmat with a unique glazed bottom surface.

These slipmats are compressed with enough thickness and density to accommodate the speed and accuracy of a Scratch DJ, without having the needle bounce when touching the vinyl.

The Mix / Club DJs using these hybrid glazed slipmats would get the absorbent feel and gain the speed along with the accuracy of a Scratch DJ.

These slipmats also work perfect for any vinyl / collector home turntablist.

Professional Grade Slipmats for 12" Turntables
Weight: 16oz Felt
Bottom Surface: Glazed
Thickness: 0.09" (3 / 32")
Read more
coming soon $12.74
FORTHCOMING
GrooveWasher Vinyl Record Landing Towel (16 inch)
Cat: 836088 Rel: 30 Sep 21
 
The new "splash" record landing towel for off-turntable record cleaning
Notes: Soft, absorbent "landing pad" to place your record for cleaning off the turntable. Cushions and protects the record while cleaning with your GrooveWasher Kit.

16" Diameter Round

Highly absorbent microfiber

Printed with original "splash vinyl record" art by KillyKillyPower artist Hope Ainsworth.

Colorfast.
Read more
MRP:$9.73 SAVE 17%
coming soon $8.11
FORTHCOMING
IDYD Eazy-E 12 Inch Turntable Slipmats
Cat: 826984
 
16oz felt turntable slipmats
Notes: Full Colour Custom Printed Turntable Slipmats, printed using a high resolution printer, the results will not disappoint.

These are considered the go-to slipmats for printers and turntablists- a hybrid slipmat with a unique glazed bottom surface.

These slipmats are compressed with enough thickness and density to accommodate the speed and accuracy of a Scratch DJ, without having the needle bounce when touching the vinyl.

The Mix / Club DJs using these hybrid glazed slipmats would get the absorbent feel and gain the speed along with the accuracy of a Scratch DJ.

These slipmats also work perfect for any vinyl / collector home turntablist.

Professional Grade Slipmats for 7" Turntables
Weight: 16oz Felt
Bottom Surface: Glazed
Thickness: 0.09" (3 / 32")
Read more
coming soon $12.74
FORTHCOMING
IDYD Acid Face 7 Inch Slipmats
Cat: 825722
 
16oz felt turntable slipmats
Notes: Full Colour Custom Printed Turntable Slipmats, printed using a high resolution printer, the results will not disappoint.

These are considered the go-to slipmats for printers and turntablists- a hybrid slipmat with a unique glazed bottom surface.

These slipmats are compressed with enough thickness and density to accommodate the speed and accuracy of a Scratch DJ, without having the needle bounce when touching the vinyl.

The Mix/Club DJs using these hybrid glazed slipmats would get the absorbent feel and gain the speed along with the accuracy of a Scratch DJ.

These slipmats also work perfect for any vinyl/collector home turntablist.

Professional Grade Slipmats for 7" Turntables
Weight: 16oz Felt
Bottom Surface: Glazed
Thickness: 0.09" (3/32")
Read more
coming soon $11.58
FORTHCOMING
GrooveWasher Vinyl Record & Stylus Care System
GrooveWasher Vinyl Record & Stylus Care System (vinyl record & stylus cleaning kit)
Cat: 835925 Rel: 30 Sep 21
 
Clean your records and your stylus with audiophile quality results, at an entry level price
Notes: This kit includes:

Microfiber fabric covered cleaning pad. Generous size: 5" x 3.5" x 1.5". Highly absorbent and grime removing fabric. Easy to use to clean records. Easy to wash when it gets dirty.

G2 High Tech Record Cleaning Fluid in 4 oz Mist Spray. More than 500 mist sprays to clean a lot of records!

SC1 Stylus Brush. 4.6 inch long curved handle with soft, fine nylon bristles remove lint and gunk from the stylus and underside of the cartridge. The best stylus brush on the market.

SC1 Stylus Cleaning Fluid. Low alcohol with technical surfactants to dissolve sticky gunk from the stylus, so the SC1 Brush can remove it. A delicate method that will do no harm to the stylus or cantilever.

Record label protector mask. Apply to the record label to keep it dry while mist spraying the G2 Fluid on the record.
Read more
MRP:$27.81 SAVE 17%
coming soon $23.18
FORTHCOMING
IDYD Donut 7 Inch Turntable Slipmats
Cat: 826968
 
16oz felt turntable slipmats
Notes: Full Colour Custom Printed Turntable Slipmats, printed using a high resolution printer, the results will not disappoint.

These are considered the go-to slipmats for printers and turntablists- a hybrid slipmat with a unique glazed bottom surface.

These slipmats are compressed with enough thickness and density to accommodate the speed and accuracy of a Scratch DJ, without having the needle bounce when touching the vinyl.

The Mix / Club DJs using these hybrid glazed slipmats would get the absorbent feel and gain the speed along with the accuracy of a Scratch DJ.

These slipmats also work perfect for any vinyl / collector home turntablist.

Professional Grade Slipmats for 7" Turntables
Weight: 16oz Felt
Bottom Surface: Glazed
Thickness: 0.09" (3 / 32")
Read more
coming soon $11.58
FORTHCOMING
Pokket Mixer Mini DJ Mixer (midnight black)
Cat: 836374 Rel: 30 Sep 21
 
Mini DJ mixer with simplified set-up
Notes: Everyone thinks they are a DJ now, and the Pokket's revolutionary design gives everyone the chance to prove it! The set-up has been simplified to the extent it takes only 30 seconds to plug and play. Incredibly, there is no power supply required.

All of the inputs and outputs run off the standard 3.5mm jack, with two input sources and one output signal - your grandma could set it up. There's a smooth and responsive cross-fader and cue mix button so you can hear what's playing on the other channel though your headphones.

There are three EQ knobs to twist on each channel for the lows, mids and highs - perfect for pulling DJ-like concentration faces whilst your mates dance around your living room holding glow sticks.

It is light, fast to set-up, pocket-sized and looks as good as a sunrise in Ibiza. All you need are some massive headphones, some devices to provide the playlists (anything with a headphone output will work) and of course a banging sound system!

Music mixing is no longer just reserved for professional DJs. The Pokketmixer is the first mobile mini DJ mixer for everybody. It's easy to use and - since it needs no power supply - it's very versatile. The handy POKKETMIXER is easy to wire up and is ready in just 30 seconds. So anyone can easily and spontaneously be a DJ anywhere and at anytime.

MAIN FUNCTIONS:

Cross fading between two stereo audio signals (headphones signals), preview listen and EQ. With the crossfader you can fade from one song to the other. With the "Listen" switch the music can be heard from either device through your headphones. An equalizer can be switched on to change low, mid and high frequency of the left or right player.

FEATURES:

Set-up: Quick and Easy
Just plug in two players, connect the music system and the dance floor is ready.

Transport: Easy
The small, light unit weighs just 130 g; needs no power supply unit, no unnecessary multiple sockets or extra connection cables.

Use: extremely flexible
For example indoors or outdoors, just connect your Pokketmixer to a battery-operated boombox - at home, in a bar, in the park, at the beach, in the car, camper or on a boat.

Two in, one out - it couldn't be easier
Two signals go in, one signal comes out. With the standard 3.5 mm stereo plug, two players are docked (eg MP3 player, mobile phone, notebook, iPad, PC) and one system plays your music (eg, stereo system or active mobilespeaker).
Read more
MRP:$119.58 SAVE 17%
coming soon $99.66
FORTHCOMING
IDYD Astronaut 12 Inch Turntable Slipmats
Cat: 826112
 
16oz felt turntable slipmats
Notes: Full Colour Custom Printed Turntable Slipmats, printed using a high resolution printer, the results will not disappoint.

These are considered the go-to slipmats for printers and turntablists- a hybrid slipmat with a unique glazed bottom surface.

These slipmats are compressed with enough thickness and density to accommodate the speed and accuracy of a Scratch DJ, without having the needle bounce when touching the vinyl.

The Mix / Club DJs using these hybrid glazed slipmats would get the absorbent feel and gain the speed along with the accuracy of a Scratch DJ.

These slipmats also work perfect for any vinyl / collector home turntablist.

Professional Grade Slipmats for 12" Turntables
Weight: 16oz Felt
Bottom Surface: Glazed
Thickness: 0.09" (3 / 32")
Read more
coming soon $12.74
FORTHCOMING
IDYD Blue Marble 12 Inch Turntable Slipmats
Cat: 826336
 
16oz felt turntable slipmats
Notes: Full Colour Custom Printed Turntable Slipmats, printed using a high resolution printer, the results will not disappoint.

These are considered the go-to slipmats for printers and turntablists- a hybrid slipmat with a unique glazed bottom surface.

These slipmats are compressed with enough thickness and density to accommodate the speed and accuracy of a Scratch DJ, without having the needle bounce when touching the vinyl.

The Mix / Club DJs using these hybrid glazed slipmats would get the absorbent feel and gain the speed along with the accuracy of a Scratch DJ.

These slipmats also work perfect for any vinyl / collector home turntablist.

Professional Grade Slipmats for 12" Turntables
Weight: 16oz Felt
Bottom Surface: Glazed
Thickness: 0.09" (3 / 32")
Read more
coming soon $12.74
FORTHCOMING
IDYD Cloud Marble 12 Inch Turntable Slipmats
Cat: 826343
 
16oz felt turntable slipmats
Notes: Full Colour Custom Printed Turntable Slipmats, printed using a high resolution printer, the results will not disappoint.

These are considered the go-to slipmats for printers and turntablists- a hybrid slipmat with a unique glazed bottom surface.

These slipmats are compressed with enough thickness and density to accommodate the speed and accuracy of a Scratch DJ, without having the needle bounce when touching the vinyl.

The Mix / Club DJs using these hybrid glazed slipmats would get the absorbent feel and gain the speed along with the accuracy of a Scratch DJ.

These slipmats also work perfect for any vinyl / collector home turntablist.

Professional Grade Slipmats for 12" Turntables
Weight: 16oz Felt
Bottom Surface: Glazed
Thickness: 0.09" (3 / 32")
Read more
coming soon $12.74
FORTHCOMING
IDYD Fried Egg 12 Inch Turntable Slipmats
Cat: 826996
 
16oz felt turntable slipmats
Notes: Full Colour Custom Printed Turntable Slipmats, printed using a high resolution printer, the results will not disappoint.

These are considered the go-to slipmats for printers and turntablists- a hybrid slipmat with a unique glazed bottom surface.

These slipmats are compressed with enough thickness and density to accommodate the speed and accuracy of a Scratch DJ, without having the needle bounce when touching the vinyl.

The Mix / Club DJs using these hybrid glazed slipmats would get the absorbent feel and gain the speed along with the accuracy of a Scratch DJ.

These slipmats also work perfect for any vinyl / collector home turntablist.

Professional Grade Slipmats for 12" Turntables
Weight: 16oz Felt
Bottom Surface: Glazed
Thickness: 0.09" (3 / 32")
Read more
coming soon $12.74
FORTHCOMING
IDYD Galaxy 12 Inch Turntable Slipmats
Cat: 827150
 
16oz felt turntable slipmats
Notes: Full Colour Custom Printed Turntable Slipmats, printed using a high resolution printer, the results will not disappoint.

These are considered the go-to slipmats for printers and turntablists- a hybrid slipmat with a unique glazed bottom surface.

These slipmats are compressed with enough thickness and density to accommodate the speed and accuracy of a Scratch DJ, without having the needle bounce when touching the vinyl.

The Mix / Club DJs using these hybrid glazed slipmats would get the absorbent feel and gain the speed along with the accuracy of a Scratch DJ.

These slipmats also work perfect for any vinyl / collector home turntablist.

Professional Grade Slipmats for 12" Turntables
Weight: 16oz Felt
Bottom Surface: Glazed
Thickness: 0.09" (3 / 32")
Read more
coming soon $12.74
FORTHCOMING
Goldring Stylus Cleaning Kit
Goldring Stylus Cleaning Kit (stylus cleaning kit)
Cat: 830580 Rel: 31 Aug 21
 
Stylus cleaning kit with 20x magnification hand lens
Notes: Your stylus travels about 1 km for every LP that you play, and like a toffee rolling across the floor- it is bound to pick up quite a lot of dust and sticky debris along the way. Eventually a small wad of fluff builds up to such a point that the stylus can no longer trace the groove and the music is interrupted by the needle skating across the record. Long before this point however, the tiniest lumps of accumulated finger-grease combined with microscopic dust particles are already robbing you of the enjoyment of crystal clear highs and low-tracking-error, distortion-free playback that you have paid for. Your ears might tell you that something is up, but your eye will be unable to spot the easiest upgrade available to all serious vinyl enthusiasts - that of simply
cleaning your stylus.

The answer comes in the form of the Golding Stylus Cleaning Kit. It provides everything you need to diagnose and rectify the problem. Starting with a highly resolving and aberration free 20x hand lens, you can minutely inspect the diamond profile for any irregular-shaped, attached debris. Normally the diamond should look like a small conical pyramid with perhaps a facet or two cut into the very tip - any irregularities which deviate from this are most likely due to accumulated dirt but could possibly also indicate wear or damage. A worn stylus can irreparably destroy a treasured record collection, so it is important to rectify this at once. A specially designed velvet pad is provided to safely remove any loose accumulations of stuff and if the stylus is still contaminated there is a specially formulated cleaning solution to be applied without fear of damaging the delicate stylus bond.
Read more
MRP:$48.67 SAVE 17%
coming soon $40.51
FORTHCOMING
Lightscale DJ DJ Stand Plus
Lightscale DJ DJ Stand Plus (DJ equipment stand)
Cat: 836388 Rel: 30 Sep 21
 
Innovative modular stand system for DJ & studio equipment
Notes: The Lightscale DJ - Stand Plus is an innovative, modular stand system for DJ and studio equipment. The DJ stand system is ultra-light compared to conventional metal systems and can be assembled within seconds. The set includes two foam plates and two small foam elements plus two 50 cm wide plastic tubes and provides a secure stand for laptops, controllers, pads, keyboards and mixers, for example. In addition, the Lightscale DJ - Stand Plus, developed and manufactured in Germany, is perfectly suited for touring DJs and airplane transport thanks to its high stability and unbeatably low weight.

Dimensions: 220 x 220 x 500 mm
Weight: 470 g
Read more
MRP:$95.94 SAVE 17%
coming soon $79.95
FORTHCOMING
Lightscale DJ DJ Stand XL
Lightscale DJ DJ Stand XL (DJ equipment stand)
Cat: 836389 Rel: 30 Sep 21
 
Innovative modular stand system for DJ & studio equipment
Notes: The Lightscale DJ - Stand XL is an innovative, modular stand system for DJ and studio equipment. The DJ stand system is ultra-light compared to conventional metal systems and can be assembled within seconds. The set contains four hard, water jet cut foam plates as well as two plastic tubes and offers a secure stand for laptops, controllers, pads, keyboards and mixers. In addition, the Lightscale DJ Stand XL, developed and manufactured in Germany, is perfectly suited for touring DJs and airplane transport thanks to its high stability and unbeatably low weight.

Dimensions: 380 x 290 x 700 mm
Weight: 660 g
Read more
MRP:$119.58 SAVE 17%
coming soon $99.66
FORTHCOMING
IDYD 80s Graffiti 12 Inch Turntable Slipmats
Cat: 825699
 
16oz felt turntable slipmats
Notes: Full Colour Custom Printed Turntable Slipmats, printed using a high resolution printer, the results will not disappoint.

These are considered the go-to slipmats for printers and turntablists- a hybrid slipmat with a unique glazed bottom surface.

These slipmats are compressed with enough thickness and density to accommodate the speed and accuracy of a Scratch DJ, without having the needle bounce when touching the vinyl.

The Mix/Club DJs using these hybrid glazed slipmats would get the absorbent feel and gain the speed along with the accuracy of a Scratch DJ.

These slipmats also work perfect for any vinyl/collector home turntablist.

Professional Grade Slipmats for 12" Turntables
Weight: 16oz Felt
Bottom Surface: Glazed
Thickness: 0.09" (3/32")
Read more
coming soon $12.74
FORTHCOMING
Pokket Mixer Mini DJ Mixer (red sky)
Cat: 836376 Rel: 30 Sep 21
 
Mini DJ mixer with simplified set-up
Notes: Everyone thinks they are a DJ now, and the Pokket's revolutionary design gives everyone the chance to prove it! The set-up has been simplified to the extent it takes only 30 seconds to plug and play. Incredibly, there is no power supply required.

All of the inputs and outputs run off the standard 3.5mm jack, with two input sources and one output signal - your grandma could set it up. There's a smooth and responsive cross-fader and cue mix button so you can hear what's playing on the other channel though your headphones.

There are three EQ knobs to twist on each channel for the lows, mids and highs - perfect for pulling DJ-like concentration faces whilst your mates dance around your living room holding glow sticks.

It is light, fast to set-up, pocket-sized and looks as good as a sunrise in Ibiza. All you need are some massive headphones, some devices to provide the playlists (anything with a headphone output will work) and of course a banging sound system!

Music mixing is no longer just reserved for professional DJs. The Pokketmixer is the first mobile mini DJ mixer for everybody. It's easy to use and - since it needs no power supply - it's very versatile. The handy POKKETMIXER is easy to wire up and is ready in just 30 seconds. So anyone can easily and spontaneously be a DJ anywhere and at anytime.

MAIN FUNCTIONS:

Cross fading between two stereo audio signals (headphones signals), preview listen and EQ. With the crossfader you can fade from one song to the other. With the "Listen" switch the music can be heard from either device through your headphones. An equalizer can be switched on to change low, mid and high frequency of the left or right player.

FEATURES:

Set-up: Quick and Easy
Just plug in two players, connect the music system and the dance floor is ready.

Transport: Easy
The small, light unit weighs just 130 g; needs no power supply unit, no unnecessary multiple sockets or extra connection cables.

Use: extremely flexible
For example indoors or outdoors, just connect your Pokketmixer to a battery-operated boombox - at home, in a bar, in the park, at the beach, in the car, camper or on a boat.

Two in, one out - it couldn't be easier
Two signals go in, one signal comes out. With the standard 3.5 mm stereo plug, two players are docked (eg MP3 player, mobile phone, notebook, iPad, PC) and one system plays your music (eg, stereo system or active mobilespeaker).
Read more
MRP:$119.58 SAVE 17%
coming soon $99.66
FORTHCOMING
IDYD Gorillaz 12 Inch Turntable Slipmats
Cat: 827152
 
16oz felt turntable slipmats
Notes: Full Colour Custom Printed Turntable Slipmats, printed using a high resolution printer, the results will not disappoint.

These are considered the go-to slipmats for printers and turntablists- a hybrid slipmat with a unique glazed bottom surface.

These slipmats are compressed with enough thickness and density to accommodate the speed and accuracy of a Scratch DJ, without having the needle bounce when touching the vinyl.

The Mix / Club DJs using these hybrid glazed slipmats would get the absorbent feel and gain the speed along with the accuracy of a Scratch DJ.

These slipmats also work perfect for any vinyl / collector home turntablist.

Professional Grade Slipmats for 12" Turntables
Weight: 16oz Felt
Bottom Surface: Glazed
Thickness: 0.09" (3 / 32")
Read more
coming soon $12.74
FORTHCOMING
GrooveWasher Record Stabiliser Weight (black)
GrooveWasher Record Stabiliser Weight (black) (vinyl record stabiliser weight)
Cat: 836089 Rel: 30 Sep 21
 
A necessary tool to secure your record to the turntable pad and platter.
Notes: The GrooveWasher Record Stabilizer Weight is a necessary tool to secure your record to the turntable pad and platter. Reduces vibrational distortion. Prevents record slippage. Flattens the record for improved tracking (will not flatten a severely warped record). Improves bass response.

14 oz milled aluminum with felt base. Laser etched on top with the GrooveWasher "circle G" icon. Measures 3.125" diameter, 1.625" high.

Includes hinged lid chipboard storage box with black foam insert.
Read more
MRP:$51.45 SAVE 17%
coming soon $42.87
FORTHCOMING
IDYD Baby Trump 12 Inch Turntable Slipmats
Cat: 826114
 
16oz felt turntable slipmats
Notes: Full Colour Custom Printed Turntable Slipmats, printed using a high resolution printer, the results will not disappoint.

These are considered the go-to slipmats for printers and turntablists- a hybrid slipmat with a unique glazed bottom surface.

These slipmats are compressed with enough thickness and density to accommodate the speed and accuracy of a Scratch DJ, without having the needle bounce when touching the vinyl.

The Mix / Club DJs using these hybrid glazed slipmats would get the absorbent feel and gain the speed along with the accuracy of a Scratch DJ.

These slipmats also work perfect for any vinyl / collector home turntablist.

Professional Grade Slipmats for 12" Turntables
Weight: 16oz Felt
Bottom Surface: Glazed
Thickness: 0.09" (3 / 32")
Read more
coming soon $12.74
FORTHCOMING
IDYD Alice 12 Inch Turntable Slipmats
Cat: 825750
 
16oz felt turntable slipmats
Notes: Full Colour Custom Printed Turntable Slipmats, printed using a high resolution printer, the results will not disappoint.

These are considered the go to slipmats for printers and turntablists, A hybrid slipmat with a unique glazed bottom surface.

These slipmats are compressed with enough thickness and density to accommodate the speed and accuracy of a Scratch DJ, without having the needle bounce when touching the vinyl.

The Mix/Club DJ's using these hybrid glazed slipmats would get the absorbent feel and gain the speed along with the accuracy of a Scratch DJ.

These slipmats also work perfect for any vinyl/collector home turntablist.

Professional Grade Blank Slipmats for 12" Turntables
Weight: 16oz Felt
Bottom Surface: Glazed
Thickness: 0.09" (3/32")
Read more
coming soon $12.74
FORTHCOMING
IDYD Fried Egg 7 Inch Turntable Slipmats
Cat: 826999
 
16oz felt turntable slipmats
Notes: Full Colour Custom Printed Turntable Slipmats, printed using a high resolution printer, the results will not disappoint.

These are considered the go-to slipmats for printers and turntablists- a hybrid slipmat with a unique glazed bottom surface.

These slipmats are compressed with enough thickness and density to accommodate the speed and accuracy of a Scratch DJ, without having the needle bounce when touching the vinyl.

The Mix / Club DJs using these hybrid glazed slipmats would get the absorbent feel and gain the speed along with the accuracy of a Scratch DJ.

These slipmats also work perfect for any vinyl / collector home turntablist.

Professional Grade Slipmats for 7" Turntables
Weight: 16oz Felt
Bottom Surface: Glazed
Thickness: 0.09" (3 / 32")
Read more
coming soon $11.58
FORTHCOMING
IDYD Barcelona 7 Inch Turntable Slipmats
Cat: 826333
 
16oz felt turntable slipmats
Notes: Full Colour Custom Printed Turntable Slipmats, printed using a high resolution printer, the results will not disappoint.

These are considered the go-to slipmats for printers and turntablists- a hybrid slipmat with a unique glazed bottom surface.

These slipmats are compressed with enough thickness and density to accommodate the speed and accuracy of a Scratch DJ, without having the needle bounce when touching the vinyl.

The Mix / Club DJs using these hybrid glazed slipmats would get the absorbent feel and gain the speed along with the accuracy of a Scratch DJ.

These slipmats also work perfect for any vinyl / collector home turntablist.

Professional Grade Slipmats for 7" Turntables
Weight: 16oz Felt
Bottom Surface: Glazed
Thickness: 0.09" (3 / 32")
Read more
coming soon $11.58
FORTHCOMING
Pioneer DJ HDJ-S7 Coiled Cable (black, 1.2m)
Cat: 840360 Rel: 31 Oct 21
 
1.2 m coiled cable for the HDJ-S7-K headphones (black)
MRP:$37.54 SAVE 17%
coming soon $31.29
FORTHCOMING
Pioneer DJ HDJ-X10/HDJ-7/HDJ-5/HDJ-2000/HDJ-2000MK2 Leather Ear Pads
Cat: 840293 Rel: 31 Oct 21
 
Nano coated ear pads for the HDJ-X10 headphones
MRP:$37.54 SAVE 17%
coming soon $31.29
FORTHCOMING
Pioneer DJ HDJ-X7/HDJ-X5 Coiled Cable (1.2m)
Cat: 840305 Rel: 31 Oct 21
 
1.2 m coiled cable for the HDJ-X7 headphones
MRP:$37.54 SAVE 17%
coming soon $31.29
FORTHCOMING
Pioneer DJ HDJ-X5/HDJ-X7 Coiled Cable (1.2m)
Cat: 840313 Rel: 31 Oct 21
 
1.2 m short coiled cable for the HDJ-X5 headphones
MRP:$37.54 SAVE 17%
coming soon $31.29
FORTHCOMING
Pioneer DJ PN-X05 DJ Stylus
Pioneer DJ PN-X05 DJ Stylus (replacement DJ stylus)
Cat: 840396 Rel: 31 Oct 21
 
Replaceable stylus for the PLX-500
MRP:$37.54 SAVE 17%
coming soon $31.29
FORTHCOMING
Pioneer DJ Stereo Plug Adapter (6.3mm)
Cat: 840358 Rel: 31 Oct 21
 
6.3 mm stereo plug adapter
MRP:$12.51 SAVE 17%
coming soon $10.43
FORTHCOMING
Audio Anatomy 12" Clear PVC Vinyl Record Sleeves (pack of 25)
Cat: 834967
 
PVC vinyl record sleeves
Notes: Pack of 25 PVC vinyl record sleeves with flap- 100 micron
Read more
coming soon $15.94
FORTHCOMING
Audio Anatomy 12" Clear PVC Vinyl Record Sleeves (pack of 50)
Cat: 834980
 
PVC vinyl record sleeves
Notes: Pack of 25 PVC vinyl record sleeves with flap- 100 micron
Read more
coming soon $27.52
FORTHCOMING
DJ Tech Tools USB-C Chroma Cable (blue, 1.5m)
Cat: 838544 Rel: 31 Oct 21
 
Audio Optimized USB-C to USB-B Cables
Notes: Audio Optimized USB-C to USB-B Cables

56kO pull-up resistor to protect your devices
Dual slimline ferrites prevent signal dropouts
High quality connectors ensure long cable life
Works with all USB-B devices

Ideal for home and professional use where impeccable audio is a must, Chroma Cables complement the modern DJ and music production technology with a streamlined styling that keeps your setup looking fresh and sleek. All cables are not created equal, and ours are engineered from scratch for digital performers, by digital performers.

Noise-Filtering Features

Each cable has two ferrite core chokes, one at each end of the cable. Paired with fully-braided shielding, Chroma Cables do a great job of eliminating interference along the signal path - making these the best USB cables for DJs.

No More Adapters

Forget about tiny adapters that can easily get lost in a dark booth. These high quality USB-C cables ensure that all your audio and MIDI devices have a reliable connection with no compromises.

Always Strapped

Even after placing your cables neatly in your bag, it's easy to wind up with a tangled clump of cables. The built-in velcro cable strap helps prevent this, keeping your gig bag nice and tidy. You'll wonder how you managed without this.

Compatibility Notes:

Works with all* USB devices with a USB type B connector but it's worth checking for obstructions if you plan on ordering an angled cable.

*Please note that the right angle cable won't work with a Kontrol D2, S2, S4, S5, S8, or Z1 or Traktor Audio 10 while using the power supply.

Size + Weight:
Length: 59.05" / 150cm
Weight: 0.18lb / 0.08kg"
Read more
MRP:$25.03 SAVE 19%
coming soon $20.27
FORTHCOMING
Rane DJ Seventy A-Track Limited Edition DJ Mixer
Cat: 839760 Rel: 31 Oct 21
 
2-channel solid steel, precision performance signature mixer with Fader FX
Notes: More than Just a Pretty Faceplate

The exterior of the Seventy A-Trak Signature Edition features a stunning silver finish than gleams beneath the aluminium-capped rotary-styled knobs and encoders. Custom font-faces and elements adorn the mixer, but the real magic lies beneath the surface. The sound curve and frequency response of the mixer was handcrafted by A-Trak himself, increasing the depth of the low-end to ensure that the high-quality audio matches his signature sound. Simply put, the Seventy A-Trak Signature Edition sounds like nothing you've ever experienced before!

Performance-Enhancing Fader FX

"I'm a big believer that every classic piece of kit should have a signature feature," says A-Trak, "something that sets it apart from the rest." Enter Fader FX, a new mixer feature that transforms the channel volume faders into linear controllers for performance effects like Filter, Roll, Pitch, Ring-Modulator, and four types of Oscillators. DJs can dive deep into the settings of these Fader FX options to change root keys, octaves, and more, crafting a personalised set of tools to take with them to their next performance or battle.

Built on the Solid Foundation of the Rane Seventy

The Seventy A-Trak Signature Edition was built upon the solid foundation of the Rane Seventy, known for its intuitive layout and best-in-class performance. The same solid-steel construction that makes the Seventy a battle-standard mixer is found in the Seventy A-Trak Signature Edition along with the same premium Mag Four faders and MPC-style Performance Pads. All of the other features that make the original Seventy the mixer of choice for discerning DJs are in the Seventy A-Trak Signature Edition as well, including easy access to Serato's Scratch Bank, external crossfader tension adjustment, and six post-fader internal Flex FX (including Fader FX) which can layered with Serato DJ Pro's Software FX.

GENERAL SPECIFICATIONS:

Display: 1.6" OLED (diagonal)
Pads: (16) velocity-sensitive multi-colour back-lit pads (8 per deck, 10 modes each)
Faders: (3) MAG FOUR tension-adjustable faders (2 channel/line faders, 1 crossfader) Connectors: (2) XLR outputs (Main)
(2) 1/4" (6.35 mm) TRS outputs (Booth)
(4) RCA stereo input pairs (Deck 1-2)
(2) XLR / 1/4" (6.35 mm) TRS inputs (Mic 1-2)
(1) RCA stereo input pair (Session)
(1) RCA stereo output pair (Session)
(1) 1/4" (6.35 mm) TRS output (Headphones)
(1) 1/8" (3.5 mm) TRS output (Headphones)
(1) 1/4" (6.35 mm) TRS input (Footswitch)
(2) USB Type-A ports (Deck 1-2 USB Controllers)
(2) USB Type-B ports
(1) IEC power cable input

Power:

Connection: IEC
Voltage: 100-240 V, 50/60 Hz
Consumption: 30 W
Dimensions (width x depth x height) 11.2" x 17.5" x 4.13"/285 x 445 x 105 mm
Weight 12.3 lbs./5.6 kg
Read more
MRP:$2,224.80 SAVE 17%
coming soon $1,854.00
FORTHCOMING
Pokket Mixer Mini DJ Mixer Volume Plus (black/gold)
Cat: 836378 Rel: 30 Sep 21
 
Mini DJ mixer with simplified set-up
Notes: Everyone thinks they are a DJ now, and the Pokket's revolutionary design gives everyone the chance to prove it! The set-up has been simplified to the extent it takes only 30 seconds to plug and play. Incredibly, there is no power supply required.

All of the inputs and outputs run off the standard 3.5mm jack, with two input sources and one output signal - your grandma could set it up. There's a smooth and responsive cross-fader and cue mix button so you can hear what's playing on the other channel though your headphones.

There are three EQ knobs to twist on each channel for the lows, mids and highs - perfect for pulling DJ-like concentration faces whilst your mates dance around your living room holding glow sticks.

It is light, fast to set-up, pocket-sized and looks as good as a sunrise in Ibiza. All you need are some massive headphones, some devices to provide the playlists (anything with a headphone output will work) and of course a banging sound system!

Music mixing is no longer just reserved for professional DJs. The Pokketmixer is the first mobile mini DJ mixer for everybody. It's easy to use and - since it needs no power supply - it's very versatile. The handy POKKETMIXER is easy to wire up and is ready in just 30 seconds. So anyone can easily and spontaneously be a DJ anywhere and at anytime.

MAIN FUNCTIONS:

Cross fading between two stereo audio signals (headphones signals), preview listen and EQ. With the crossfader you can fade from one song to the other. With the "Listen" switch the music can be heard from either device through your headphones. An equalizer can be switched on to change low, mid and high frequency of the left or right player.

FEATURES:

Set-up: Quick and Easy
Just plug in two players, connect the music system and the dance floor is ready.

Transport: Easy
The small, light unit weighs just 130 g; needs no power supply unit, no unnecessary multiple sockets or extra connection cables.

Use: extremely flexible
For example indoors or outdoors, just connect your Pokketmixer to a battery-operated boombox - at home, in a bar, in the park, at the beach, in the car, camper or on a boat.

Two in, one out - it couldn't be easier
Two signals go in, one signal comes out. With the standard 3.5 mm stereo plug, two players are docked (eg MP3 player, mobile phone, notebook, iPad, PC) and one system plays your music (eg, stereo system or active mobilespeaker).
Read more
MRP:$168.25 SAVE 17%
coming soon $140.20
FORTHCOMING
Music Protection Deluxe Vinyl Record Dividers (red)
Cat: 839757
 
Vinyl record dividers
Notes: Red vinyl record dividers in a leather boxset.
Read more
coming soon $52.13
FORTHCOMING
Music Protection Deluxe Vinyl Record Dividers (white)
Cat: 839759
 
Vinyl record dividers
Notes: White vinyl record dividers in a leather boxset.
Read more
coming soon $52.13
FORTHCOMING
IDYD Galaxy 7 Inch Turntable Slipmats
Cat: 827151
 
16oz felt turntable slipmats
Notes: Full Colour Custom Printed Turntable Slipmats, printed using a high resolution printer, the results will not disappoint.

These are considered the go-to slipmats for printers and turntablists- a hybrid slipmat with a unique glazed bottom surface.

These slipmats are compressed with enough thickness and density to accommodate the speed and accuracy of a Scratch DJ, without having the needle bounce when touching the vinyl.

The Mix / Club DJs using these hybrid glazed slipmats would get the absorbent feel and gain the speed along with the accuracy of a Scratch DJ.

These slipmats also work perfect for any vinyl / collector home turntablist.

Professional Grade Slipmats for 7" Turntables
Weight: 16oz Felt
Bottom Surface: Glazed
Thickness: 0.09" (3 / 32")
Read more
coming soon $11.58
FORTHCOMING
IDYD Graffiti Blue 12 Inch Turntable Slipmats
Cat: 827156
 
16oz felt turntable slipmats
Notes: Full Colour Custom Printed Turntable Slipmats, printed using a high resolution printer, the results will not disappoint.

These are considered the go-to slipmats for printers and turntablists- a hybrid slipmat with a unique glazed bottom surface.

These slipmats are compressed with enough thickness and density to accommodate the speed and accuracy of a Scratch DJ, without having the needle bounce when touching the vinyl.

The Mix / Club DJs using these hybrid glazed slipmats would get the absorbent feel and gain the speed along with the accuracy of a Scratch DJ.

These slipmats also work perfect for any vinyl / collector home turntablist.

Professional Grade Slipmats for 12" Turntables
Weight: 16oz Felt
Bottom Surface: Glazed
Thickness: 0.09" (3 / 32")
Read more
coming soon $12.74
FORTHCOMING
GrooveWasher Walnut Display Block & G2 Vinyl Record Cleaing Fluid 2oz Bottle
Cat: 836087 Rel: 30 Sep 21
 
Custom made, solid American walnut display/kit storage block/2oz G2 fluid bottle
Notes: Custom CNC routed to store your GrooveWasher handle with replaceable cleaning pad, 2 oz G2 Fluid mist spray bottle, SC1 Stylus Brush and Stylus Cleaning Fluid.

Walnut Display Block comes with a 2 oz bottle of G2 Fluid!

See photo with all parts installed into the Block. This photo is an illustration of the use of the Block. This item listing is for the Walnut Display Block only.

Keep your GrooveWasher kit next to your turntable to groom your records and needle--just before each play.

Hand rubbed waterproof oil polyurethane finish.

Designed and made by GrooveWasher in North Kansas City, USA
Read more
MRP:$27.81 SAVE 17%
coming soon $23.18
FORTHCOMING
IDYD Astronaut 7 Inch Turntable Slipmats
Cat: 826113
 
16oz felt turntable slipmats
Notes: Full Colour Custom Printed Turntable Slipmats, printed using a high resolution printer, the results will not disappoint.

These are considered the go-to slipmats for printers and turntablists- a hybrid slipmat with a unique glazed bottom surface.

These slipmats are compressed with enough thickness and density to accommodate the speed and accuracy of a Scratch DJ, without having the needle bounce when touching the vinyl.

The Mix / Club DJs using these hybrid glazed slipmats would get the absorbent feel and gain the speed along with the accuracy of a Scratch DJ.

These slipmats also work perfect for any vinyl / collector home turntablist.

Professional Grade Slipmats for 7" Turntables
Weight: 16oz Felt
Bottom Surface: Glazed
Thickness: 0.09" (3 / 32")
Read more
coming soon $11.58
FORTHCOMING
GrooveWasher Cleaning Pad
GrooveWasher Cleaning Pad (vinyl record cleaning pad)
Cat: 836082 Rel: 30 Sep 21
 
Replacement microfiber cleaning pad- black terry close style
Notes: Highly absorbent split-fiber microfiber fabric. Black terry close style. Works well on heavily soiled records or for fine grooming just before play.

This pad has a 3/16" thick, laser cut acrylic base. The pad base has low profile velcro for firm attachment to the walnut handle. Easy removal for pad washing or replacement. Hand crafted by our pad making artisans in North Kansas City, Missouri, USA.
Read more
MRP:$16.69 SAVE 17%
coming soon $13.91
FORTHCOMING
IDYD Alice 7 Inch Turntable Slipmats
Cat: 825995
 
16oz felt turntable slipmats
Notes: Full Colour Custom Printed Turntable Slipmats, printed using a high resolution printer, the results will not disappoint.

These are considered the go-to slipmats for printers and turntablists- a hybrid slipmat with a unique glazed bottom surface.

These slipmats are compressed with enough thickness and density to accommodate the speed and accuracy of a Scratch DJ, without having the needle bounce when touching the vinyl.

The Mix / Club DJs using these hybrid glazed slipmats would get the absorbent feel and gain the speed along with the accuracy of a Scratch DJ.

These slipmats also work perfect for any vinyl / collector home turntablist.

Professional Grade Slipmats for 7" Turntables
Weight: 16oz Felt
Bottom Surface: Glazed
Thickness: 0.09" (3 / 32")
Read more
coming soon $11.58
Items 1 to 50 of 166 on page 1 of 4
1  2  3  4  »

Filter

Coming Soon: DJ Equipment
Close