安全购物

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

安全购物

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Coming Soon: Studio Equipment

首页  Coming Soon  

Studio Equipment

Options
Items 51 to 100 of 266 on page 2 of 6
«  1  2  3  4  5  6  »
FORTHCOMING
TouellSkouarn Strakal Silisiom Distortion & Waveshaper Module
Cat: 790480 Rel: 31 Dec 20
 
Distortion & waveshaper module
Notes: The Strakal Silisiom is composed of two different fuzz circuits.

Features:
2 Different Fuzz circuits sharing the same controls
Morphing between the 2 Fuzz circuits (cv controlled)
Russian NOS Silicon Transistors
All analog

HP : 8
Read more
MRP:$335.34 SAVE 17%
coming soon $279.43
FORTHCOMING
Sensel Buchla Thunder Overlay For Morph MIDI Controller
Cat: 785456
 
Overlay
Notes: The legendary expressive controller, the Buchla Thunder, now comes to the Sensel Morph in an exclusive new partnership with Buchla U.S.A.

The Buchla Thunder Overlay exclusively features a new preset system to the Morph. By holding the preset button and tapping on one of the nine numerical keys, you can easily and instantly switch between nine mappings without needing to open the SenselApp. Need to go from an instrument controller to a virtual mixer? Want to swap between scales? Presets add a seamless extension of expressive control possibility to the Buchla Thunder Overlay.

The Buchla Thunder is uniquely well-suited to a variety of instruments - from synthesizers with rich and evolving timbres, to acoustic samples that benefit from a more human touch, to hardware synthesizers like the legendary Buchla Easel. You can witness the richness of expression in the videos above.

The MIDI protocol is USB Class-compliant and supports MIDI Polyphonic Expression (MPE) and Bluetooth MIDI.

Read more
MRP:$85.16 SAVE 24%
coming soon $64.31
FORTHCOMING
Tesseract Modular Radioactive Analogue Modelling Digital Oscillator Module
Tesseract Modular Radioactive Analogue Modelling Digital Oscillator Module (digital / oscillator / waveshaper synth module)
Cat: 797271 Rel: 31 Jan 21
 
Synth module
Notes: Analog modelling digital oscillator with phase offset modulation

Radioactive is a small but powerful 14-bit analog modelling voltage-controlled digital sound source: a complete voice Eurorack module in 6HP. It consists of 3 simultaneous independent oscillators, voltage-controlled AR/ASR transient generator, voltage-controlled pitch slew (glide) and voltage-controlled waveshaper with 5 different modes, but that's just the beginning. Its forte consists of selectable gate/trigger/constant envelope timing signals, rather unique 3-voice polyphonic mode, semitone-quantized mode, voltage-controlled waveform selection, on-the-fly selectable 10Vpp CV input range with offset (except for Pitch), a few experimental features, and then some.

Under the hood, it's a chiptune-inspired wavetable-gnawing sound cruncher with a mind of it's own, and oh boy it's dirty. It could be described as raw and untamed, but it would probably be an understatement.

Operation:
V/Oct Pitch input with attenuator
3 CV inputs with offset (Glide/Attack, Release, Shaper)
Trig/Gate input for envelope triggering/gating
Wave change trigger input
Single button with 3 different functions: waveform change with short press, shift function (alternate control parameter) with long press, enter setup mode on power-up.
3 green illuminated indicators of selected waveform and their combinations, also providing information in setup mode
Single red illuminated indicator of incoming trigger or high/low gate signal
Simple and intuitive setup without menu diving (parameters are saved and recalled at start-up)
3 different operation modes (A, B & C) selectable in setup:
A - Free range oscillator with Attack and Release envelope
B - Free range oscillator with Release envelope and Glide
C - Quantized oscillator with Release envelope and Glide
3 different envelope activation modes (G, T & P) selectable in setup:
G - Gate mode, monophonic
T - Trigger mode, monophonic
P - Poly mode, 3-voice polyphonic
5 different wave shaper modes selectable in setup and at runtime
9 basic waveforms and 12 different combinations

Specifications:
VCDO sound source with thousands of possible waveform shapes
All inputs: 100k impedance, 512Hz DC rate
32kHz refresh rate
14-bit sound generation
10-bit CV capture
V/oct input range: 0 to +5V (C1-C6 with octave shift control to cover the entire C0-C8 range)
CV input range: on-the-fly selectable 0 to 10V, -5 to +5V or any other 10Vpp range between -10 and +10V
Trig/Gate input range: 0 to +10V (0V closed, 3V+ open), protected
Output levels: -5V to +5V (10Vpp), envelope/shaper mode dependable
Professionally designed front panel with all linked functions clearly labeled in different colours
Comprehensive User guide covering all operation modes and extensive Build guide for DIYers

42 mA +12V
10 mA -12V
0 mA 5V
25 mm deep
Read more
MRP:$102.46 SAVE 17%
coming soon $85.38
FORTHCOMING
Tesseract Modular 12x12 Buffered Matrix Module
Tesseract Modular 12x12 Buffered Matrix Module (multiple / utility synth module)
Cat: 797270 Rel: 31 Jan 21
 
Synth module
Notes: This module is a 12 ins and 12 outs precision buffered matrix.

Is conceived to be a semi-permanent matrix for medium to big systems, with white silkscreen labels to customize ins and outs names.

Every output has a rotary switch to select an input. You can make the same input go through several outputs but not several inputs go to the same output.

There's also a bicolor led next to every output for visual info of the signal that is going through it.

Allows fast patch changes and easy rerouting signals, both audio and cv.

Can be used as a traditional buffered multiple, pretty flexible one: 1 x 12 outs, 2 x 6 outs, 3 x 4 outs etc.

26 HP
45 mA +12V
45 mA -12V
Read more
MRP:$238.20 SAVE 17%
coming soon $198.49
FORTHCOMING
Tesseract Modular 8x8 Buffered Matrix Module
Tesseract Modular 8x8 Buffered Matrix Module (multiple / switch / utility synth module)
Cat: 797244 Rel: 31 Jan 21
 
Synth module
Notes: This module is a 8 ins and 8 outs precision buffered matrix.

Every output has a rotary switch to select an input. You can make the same input go through several outputs but not several inputs go to the same output.

There's also a bicolor led next to every switch for visual info of the signal that is going thru it.

Allows fast patch changes and easy rerouting signals, both audio and cv.

Can be used as a traditional buffered multiple, pretty flexible one: 1 x 8 outs, 2 x 4 outs, 4 x 2 outs or any other combination.

62 mA +12V
65 mA -12V
Read more
MRP:$113.11 SAVE 17%
coming soon $94.25
FORTHCOMING
Moog Grandmother SR Series Case
Cat: 792865 Rel: 31 Dec 20
 
Case for Moog Grandmother
Notes: Moog SR Series Cases are here to safeguard your Moog Grandmother synthesizer where you need it most and ensure your sound travels far and wide.

Musician's report the most important performance a case can offer are protection from impact and protection from water - in that order. With that in mind, Moog SR Series Cases have been developed to be the first line of defense for your synthesizer.

Moog SR Series Cases feature generous padding around a semi-rigid ABS shell, a rugged Ballistic Cordura outer that resists tears and abrasions, and laminated water-resistant zippers to offer on-the-go protection and safe storage for your instrument. Multiple strap and handle configurations keep your commute comfortable, and multifunction pockets ensure you're organized on arrival.

Moog SR Series Cases are a perfect fit for your Moog Grandmother Synthesizer.

PLEASE NOTE: The Moog Grandmother is not included in this purchase, it is for demonstration only.

MATERIAL:

INTERNAL: Padded plush liner
EXTERNAL: Durable abrasion resistant 1680D Cordura, water-resistant
Laminated zippers, reinforced stitching and metal rivets

PADDING: Semi-rigid ABS, generous foam padding

HANDLES/STRAPS:
(2) Smooth and durable webbed handles (top and side) with reinforced stitching
Removable anti-slip shoulder strap,
Removable air-mesh padded backpack straps

POCKETS:
External Pockets
Multi-compartment Exterior Pocket
Rear pocket for storing tablet or laptop
Internal Pockets
Zippered pockets
Velcro pocket
Pen holders

WHAT'S IN THE BOX:
Grandmother Semi-Rigid Bag
Removable Backpack Straps
Removable Shoulder Harness

DIMENSIONS:

INTERNAL IMPERIAL (in): L 23" x W 14." x H 5.5" (tapers down to 3")
EXTERNAL IMPERIAL (in): L 25" x W 16" x H 7"
Read more
MRP:$264.81 SAVE 17%
coming soon $220.67
FORTHCOMING
Moog Matriarch SR Series Case
Moog Matriarch SR Series Case (synthesiser case)
Cat: 792869 Rel: 31 Dec 20
 
Case for Moog Matriarch
Notes: Moog SR Series Cases are here to safeguard your Moog Matriarch synthesizer where you need it most and ensure your sound travels far and wide.

Musician's report the most important performance a case can offer are protection from impact and protection from water - in that order. With that in mind, Moog SR Series Cases have been developed to be the first line of defense for your synthesizer.

Moog SR Series Cases feature generous padding around a semi-rigid ABS shell, a rugged Ballistic Cordura outer that resists tears and abrasions, and laminated water-resistant zippers to offer on-the-go protection and safe storage for your instrument. Multiple strap and handle configurations keep your commute comfortable, and multifunction pockets ensure you're organized on arrival.

Moog SR Series Cases are a perfect fit for your Moog Matriarch Synthesizer.

Material:

INTERNAL: Padded plush liner
EXTERNAL: Durable abrasion resistant 1680D Cordura, water-resistant
Laminated zippers, reinforced stitching and metal rivets
PADDING: Semi-rigid ABS, generous foam padding
HANDLES/STRAPS:
(2) Smooth and durable webbed handles (top and side) with reinforced stitching
Removable anti-slip shoulder strap,
Removable air-mesh padded backpack straps

POCKETS:
External Pockets
Multi-compartment Exterior Pocket
Rear pocket for storing tablet or laptop
Internal Pockets
Zippered pockets
Velcro pocket
Pen holders

WHAT'S IN THE BOX:

Matriarch Semi-Rigid Bag
Removable Backpack Straps
Removable Shoulder Harness

Dimensions:

INTERNAL IMPERIAL (in): L 32" x W 14.5=25" x H 5.5"
EXTERNAL IMPERIAL (in): L 34" x W 16" x H 7"
INTERNAL METRIC (cm): L 81.28cm x W 36.2cm x H 13.97cm
EXTERNAL METRIC (cm): L 86.36cm x W 40.64cm x H 17.78cm
Read more
MRP:$384.57 SAVE 17%
coming soon $320.47
FORTHCOMING
Midi Fighter 3D MIDI Controller
Cat: 794824 Rel: 31 Jan 21
 
MIDI controller with 3D control
Notes: Connect, trigger, & tilt to perform.

One of the most popular finger drumming and performance controllers around. Built like a tank to survive a beating on stage and in the studio. The 3D is equipped with world class arcade buttons that perform better than anything around.

The Midi-Fighter also includes a completely unique 3D controller set. You can map left, right, forward and back tilt to any parameter including FX, filters, or pitch. By combining a gyroscope, accelerometer, and compass we provide the smoothest, most accurate 3D control you can possibly imagine.

Six hidden, but very functional buttons are built into the soft sides of every Midi Fighter. These can even be banked so their functionality changes depending which of the 4 banks is enabled. You can even map these to launch scenes in Ableton.

The four top buttons can provide 4 banks of arcade control or they can be directly mapped to your own settings. This feature and others are changed using the powerful MIDI editor.

These buttons were forged in hell: made for non-stop, 24/7 button-mashing in busy arcades. Rock-solid construction, buttons rated to last 5 million presses and zero moving parts mean one thing: the 3D can survive a serious beating.

Playing a real drum kit just feels satisfying. Why? Real drums bounce back. Our buttons bounce back one full millimeter for ultra-fast playback, easy triplets & drum rolls. Offering industry-leading latency, this is the gold standard for finger drummers.

Shouldn't music making feel fun and not frustrating? Meet the 3D: 4 banks of 16 buttons - aka all you need to make and play a full song. Easily color code each LED ring or create ultra bright, eye-popping light shows to impress friends.
Read more
MRP:$270.13 SAVE 17%
coming soon $225.10
FORTHCOMING
Decksaver Arturia Keystep Pro Keyboard Controller Cover
Cat: 801875 Rel: 28 Feb 21
 
Polycarbonate shell cover for Arturia Keystep Pro Keyboard Controller
Notes: Custom engineered in the UK for the Arturia Keystep Pro Keyboard Controller, Decksaver's super durable polycarbonate shell protects against dust, liquid and accidental impact. Precision trimmed for an exact fit whilst accommodating cables, your MPC can sit ready for operation. Slides straight into a flight case or bag ready for transportation. Shields delicate controls and internal components from damage at home, on the road and on stage.
Read more
coming soon $41.03
FORTHCOMING
Decksaver Arturia Keystep 37 Keyboard Controller Light Edition Cover
Cat: 801879 Rel: 28 Feb 21
 
Polycarbonate shell cover for Arturia Keystep 37 Keyboard Controller
Notes: Light Edition - still made from super durable polycarbonate but reaching you at a more affordable price. Engineered in the UK specifically for the Arturia Keystep 37 Keyboard Controller. Custom moulded to fit the contours of the unit whilst leaving USB connections in place, the MPK Mini MK2 can sit ready for operation. Super durable polycarbonate shell protects delicate keys during transportation and slides straight into a flight case or bag for maximum protection. Don't go losing your keys.
Read more
coming soon $31.88
FORTHCOMING
Behringer TM1 Complete Recording Package With Large Diaphragm Condenser Microphone
Cat: 799854 Rel: 11 Jan 21
 
TM1 microphone, shock mount with integrated pop shield, 20' (6 m) XLR cable and dust cover
Notes: The large-diaphragm TM1 Condenser Microphone is designed to capture your sounds with incredible realism, sensitivity and accuracy. Featuring premium-grade electronic components and a pure gold-plated diaphragm capsule, the TM1 captures pristinely clear audio via its cardioid pickup pattern design and wide 132 dB dynamic range. This versatile microphone is well suited for a variety of applications ranging from recording studios to broadcast stations. Rounding out the package is a heavy duty shock mount with integrated pop shield, a dedicated dust cover, and a 20' (6 m) professional grade microphone cable.

Condenser microphones are the ideal choice for capturing vocals and acoustic instruments and are the primary type of microphone used in recording studios and radio stations. The TM1 mic is capable of capturing much more detail than most dynamic microphones because of its wider and flatter frequency response. Another difference between condenser and dynamic mics is they contain active circuitry that requires phantom power (+48 V) for operation. You can power your TM1 using any phantom power equipped mixing console.

The TM1 condenser microphone is the affordable, premium-quality way to get what you really hear into your recorder or computer DAW. Thanks to the pressure gradient transducer and internally shock-mounted 1.0" gold-sputtered large diaphragm capsule, the TM1 mic delivers an open transparent sound with excellent transient response, and large frequency response from 20 Hz - 20 kHz. Its cardioid pickup pattern is superb for capturing the most subtle vocal or instrumental nuance, while rejecting undesirable off -axis sounds.

Clean and ultra-quiet operation is the hallmark of any great microphone, and the TM1 comes through with virtually noise-free transmission via its exceptional transducer and gold-plated XLR output. Add an onboard state-of-the-industry preamplifier with transformer-less output stage, and your sound source is delivered with unparalleled accuracy and transparency.

The TM1 is designed to be your go-to studio microphone for years and years to come. An excellent choice for both live and studio applications, you get the professional-grade TM1, heavy duty shock mount with pop filter, and a 20' (6 m) microphone cable. Just add the talent and your mic stand - and you are ready to track.

Read more
coming soon TBA
FORTHCOMING
Arturia MicroFreak Vocoder Limited Edition (B-STOCK)
Cat: 800834
 
B-STOCK: Box slightly damaged, product unopened & in perfect working order
Notes: ***B-STOCK: Box slightly damaged, product unopened & in perfect working order***


The uniquely unpredictable MicroFreak but not as you know it. 14 digital oscillator modes, velvety analog filters and heaps of modulation/randomization controls, supercharged with wild vocoding abilities.

Arturia have created an entirely new 16-band mode to transform your voice in the Freakiest way possible. The vocoder engine features 3 waveforms - sawtooth, pulse width and noise - while the Timbre and Shape knobs adjust the response of the 16 frequency bands.

MicroFreak Vocoder Edition goes beyond robot vocals. 16 new presets give you instant access to android translations, crystalline harmonies and vibrant formant sequences galore. Connect an ex-ternal sound source like a drum machine or synth via the headphone socket for glitchy sound pro-cessing. Step up to the mic A simple, removable mic attachment that lets you sprinkle your voice into the mix. A gooseneck design means quick position adjustment, with easy connection straight into the headphone socket alongside your cans. The utility menu lets you set your preferred mic gain and noise gate settings. A new dress code First impressions make a difference. MicroFreak has always been out to make a statement, and the Vocoder Edition is no exception. The control panel has been given a makeover. The center strip boasts a bold new Swan graphic, while a sleek white finish makes this limited edition Freak stand out from the crowd - as if it didn't already. The Freak within Behind the revamped appearance and microphone attachment is the same lovable maniac that set the synth world spinning. Sparkling digital and wavetable oscillators collide with warm analog filters. A unique poly-after-touch PCB keyboard combines with a distinctly freaky arpeggiator & sequencer. Bathe your mix in sonic hysterics with the erratic mod matrix or the unique Spice & Dice randomizers.

Box contents:
MicroFreak Vocoder unit
Electret mic with gooseneck and headphone adapter
Power supply

Size & weight
Instrument size : 12.2 x 9.2 x 2.2 inches (311 x 233 x 55mm)
Instrument weight : 2.3 lbs. (1.02 Kg)

Read more
coming soon $266.51
FORTHCOMING
Presonus Eris Sub8 8 Inch Studio Subwoofer
Cat: 791881 Rel: 31 May 21
 
8-inch 100W studio subwoofer
Notes: The Eris Sub8 is the first subwoofer to join the lauded and best-selling Eris studio monitor line. This product was named Eris because it's been designed from the ground up to be part of the family; it compliments the voicing and frequency response of the modern Eris classics. Of course, they'll play nice with other monitors, too, but if you've got a pair of Eris in your home or studio already, the Eris Sub8 is the single best subwoofer you can get to put a little boom in your room.

The surprisingly loud 100-Watt Eris Sub8 drops down to a molar-rattling 30Hz- a full 50Hz below the Eris 3.5s. This allows you to both rock harder and produce better mixes, as you'll be hearing an accurate representation of your work. For EDM and hip-hop producers in particular, a sub is a must-have. The Eris Sub8 lets you naturally extend the reach of your Eris E3.5 or E4.5 monitors in a manner appropriate to smaller rooms; exactly where these monitors excel.

Thanks to robust configuration and I/O, you'll be able to tailor your Eris Sub8 configuration exactly to your mixing and listening needs. You can connect your existing monitors via 1/4" TRS or RCA, set the input level to your liking, and even invert the polarity. Most importantly, you get a High Pass Filter and a Low Pass Crossover control that ensures your Eris Sub8 starts working at the precise low-frequency point where your main monitors stop working. This makes sure you avoid the flubbery, smudged, low-end mess that one hears in redundant, duplicate, redundant bass reproduction that occurs without a crossover.

While the Sub8 has been designed to compliment our smaller-form Eris media reference monitors, gamers, partiers, and movie buffs alike still all enjoy some room-rattle now and again. So rest easy knowing that the Eris Sub8s will upgrade the performance of any powered speaker configuration in a home theatre or gaming rig.

When you hear the low-frequency foundation of your mix accurately, you can make more informed decisions and create more translatable mixes. You'll also have more fun.

Inputs:
2- Balanced 1/4" TRS

2- Unbalanced RCA

Outputs
2- Balanced 1/4" TRS (full range with 80 Hz HPF option)

2- Unbalanced RCA (full range with 80 Hz HPF option)

Performance:
Frequency Response: 30 Hz - 200 Hz
Low Pass Filter Frequency: 50 - 130 Hz (variable)
Signal-to-Noise Ratio: >95 dB (A weighted)
THD: 0.05%
Amplifier Power: 100W peak, 50W RMS
Power Consumption: 100W
Amplifier Type: Class AB
Peak SPL at 1m: 113 dB
Woofer: 8" paper-composite with high-elasticity rubber surround, front-firing
Acoustic Port: Front-firing bass reflex

User Controls:
Input Gain Range: -30 to +6 dB
Polarity Switch: 0- or 180-
Low Pass Filter Control:50 Hz to 130 Hz
High Pass Filter Switch: On/Off

Protection:
RF interference

Output-current limiting

Over-temperature

Turn-on/off transient

Subsonic filter

External mains fuse

Power:
100-120V ~50/60 Hz or 220-240V ~50/60 Hz

Cabinet:
Vinyl-laminated MDF

Physical:
Width: 9.8" (250 mm)
Depth: 12.75" (324 mm)
Height: 11.6" (295 mm)
Weight: 16.3 lbs (7.4 kg)
Read more
MRP:$240.86 SAVE 17%
coming soon $200.71
FORTHCOMING
Jensen JTA-315 Dual Receive/Transmit Bluetooth Wireless Turntable3 -Speed With Stereo Speakers & Headphone Jack (black)
Cat: 797738
 
Bluetooth wireless turntable with stereo speakers
Notes: Works as a stand alone music system or stream music from your phone to the systems speakers or from the turntable to your Bluetooth enabled speakers or headphones.
Read more
coming soon $93.14
FORTHCOMING
Sensel Piano Overlay For Morph MIDI Controller
Cat: 785459
 
Overlay
Notes: Make music on the go or in the studio with the Piano Overlay. It features 24 keys, octave-shift, transport controls, velocity sensitivity, and more. Combine up to four devices to create a full size piano! Pitch bend on every finger for unique control over your synths and sounds.
The MIDI protocol is USB Class-compliant and has MIDI Polyphonic Expression (MPE) and Bluetooth MIDI

*This overlay is designed to be used with the Sensel Morph. So if you don't already own a Morph, pick up the Morph with Piano Overlay or the Music Maker's Bundle.

Music Software Compatibility
The Morph is compatible with any music software that listens to MIDI controls.
Free licenses for Arturia - Analog Lab Lite and Bitwig Studio 8-Track are included free with the Morph.
Our user guide includes instructions for:
Ableton Live
Apple GarageBand
Apple Logic
Bitwig Studio
Cycling '74 Max
Image-Line FL Studio
Presonus Studio One 2
Propellerhead Reason

The Morph is also compitable with these iOS Apps:
Apple GarageBand
SunVox
FunkBox Drum Machine
Steinberg Cubase, Avid ProTools, MOTU Digital Performer, Cakewalk SONAR, Cockos Reaper, Renoise, Traktion, etc. will also listen to The Morph, along with any music software that listens to MIDI controls.
Read more
MRP:$45.24 SAVE 17%
coming soon $37.70
FORTHCOMING
Sensel Music Production Overlay For Morph MIDI Controller
Cat: 785462
 
Overlay
Notes: Tune up your electronic music chops with Sensel's customizable MIDI control surface. The 16 pads, bass synth keyboard, and slew of knobs and sliders equip you with all you need for your next hit. Pitch bend and after-pressure make this an essential tool for beats and sound design.
The MIDI protocol is USB Class-compliant and has MIDI Polyphonic Expression (MPE) and Bluetooth MIDI
*This overlay is designed to be used with the Sensel Morph. So if you don't already own a Morph, pick up the Morph with Music Production Overlay or the Music Maker's Bundle.

Music Software Compatibility
The Morph is compatible with any music software that listens to MIDI controls.
Free licenses for Arturia - Analog Lab Lite and Bitwig Studio 8-Track are included free with the Morph.
Our user guide includes instructions for:
Ableton Live
Apple GarageBand
Apple Logic
Bitwig Studio
Cycling '74 Max
Image-Line FL Studio
Presonus Studio One 2
Propellerhead Reason

The Morph is also compatible with these iOS Apps:
Apple GarageBand
SunVox
FunkBox Drum Machine
Steinberg Cubase, Avid ProTools, MOTU Digital Performer, Cakewalk SONAR, Cockos Reaper, Renoise, Traktion, etc. will also listen to The Morph, along with any music software that listens to MIDI controls.
Read more
MRP:$45.24 SAVE 17%
coming soon $37.70
FORTHCOMING
Midi Fighter 64 MIDI Controller
Cat: 794832 Rel: 31 Jan 21
 
MIDI controller with LED lights
Notes: The best controller for finger drumming.

Authentic Japanese arcade buttons offer industry leading latency for ultra fast playback. Bright LEDs make it easy to create eye-popping light-shows. This looks and feels like nothing else.

The ultra bright LEDs are perfect for performance videos. Easily trigger pre-made LED animations with one touch, or customize each LED yourself for advanced light shows. This is the exact same model Shawn Wasabi uses.

Playing a real drum kit just feels satisfying. Why? Real drums bounce back. The buttons bounce back one full millimeter for ultra-fast playback, easy triplets & drum rolls. Offering industry-leading latency, this is the gold standard for finger drummers.

These buttons were forged in hell: made for non-stop, 24/7 button-mashing in busy arcades. Rock-solid construction, buttons rated to last 5 million presses and zero moving parts mean one thing: the 64 can survive a serious beating

Read more
MRP:$488.37 SAVE 17%
coming soon $406.97
FORTHCOMING
Tesseract Modular Blinks VU Meter Module
Cat: 797275 Rel: 31 Jan 21
 
Synth module
Notes: VU meter for eurorack.

BLINKS is a VU meter for eurorack with 24 RGB leds per channel, function is pretty easy, it has 2 inputs, one for each led column (no output).

PATT button changes the led pattern ( 6 patterns to choose ).

SENS button changes the input sensitivity, cycling in 7 steps.

Long pressing the PATT button enters the color scheme selection.

Long pressing SENS button enters the brightness adjustment. Most probably you'll prefer the lowest setting.

The module has a 5v regulator in case you don't have 5v in you eurorack PSU. A jumper in the back select if the led board would be powered by the 5v rail or the internal regulator (which works with the +12v rail)

Up to 3 stereo signals can be connected to a buffered input using the rear headers.

Easy DIY with only a few components, the led board is already assembled.

5v not indispensable
+5v: 30 mA (on lowest brightness)
+12v: 4mA (or ~40mA if 5v rail is not used)
Read more
MRP:$59.88 SAVE 17%
coming soon $49.89
FORTHCOMING
Tesseract Modular FranKinksTides 1.2 Dual Tidal Modulator Module
Tesseract Modular FranKinksTides 1.2 Dual Tidal Modulator Module (envelope generator / function generator / LFO / oscillator / digital / dual & stereo synth module)
Cat: 797277 Rel: 31 Jan 21
 
Synth module
Notes: Dual tidal modulator with max, min & mix outs

FranKinksTides is a 18hp dual Tides (based on the Swirls pcb layout) with the max/min circuit from Kinks and some switches for sync, quadrature, pll and fm operation . It can be a double/complex oscillator, a dual function generator or any combination of oscillator, Lfo and Envelope generator with lots of cv control plus some interesting cross-modulation and sync features.

Some improvements in version 1.2:

-Mix output is now buffered, no signal bleeding on single outs.
-Mix pot controls also the balance of the signals sent to the max/min circuit.
-Uni/bi switch now also determines the signal sent to FM1.
-Clock/sync switch has now a center OFF position, no need of plugging a dummy cable in the Clock1 when using Sheeps firmware to avoid ultra fast sound bank changes.
small improvements for DIY:
-Bigger font size on the pcb.
-Parts renumbered for easy DIY.

Original design by Emilie Gillet
Available assembled and DIY (pcb+panel)
+12v
-12v
Read more
MRP:$262.15 SAVE 17%
coming soon $218.45
FORTHCOMING
Tesseract Modular Selecta 8-Channel OR Combiner & A/B Switch Module
Cat: 797261 Rel: 31 Jan 21
 
Synth module
Notes: This module has 4 channels of OR Combiner and 4 channels of A/B Switch.

This new version has a reversible panel, so the switches can be placed on the left or the right side.

The OR Combiner is conceived to select or sum trigger and/or gate signals, each channel has 2 inputs (A & B) and one output. A switch select which signal would be present at output, being the middle position of the switch the sum of both. It could be used with other type of signals but only the positive part of these would be present at the output stage (with a small lack of voltage because of the diodes and the pulldown resistor), so it could work with envelopes for example. With bipolar voltages the OR COMBINER channels will work as a Half-wave rectified output (the negative half of the signal is clipped to 0V) This can add many harmonics to audio signals, the combination of 2 oscillators will give as result a sort of 'ring modulator' sound.

The A/B Switch selects between A and B and the middle position of the switch is a "mute", works with any kind of signal (cv or audio) and is bidirectional. Can be used with 2 input signals and 1 output or 1 input signal and 2 outputs.

The circuit of the first version has been re-designed to avoid the bleeding among other issues.

This module does not draw any power.

Read more
MRP:$66.54 SAVE 17%
coming soon $55.44
FORTHCOMING
Decksaver Empress Effects Zoia Effects Pedal Cover
Cat: 801888 Rel: 28 Feb 21
 
Polycarbonate shell cover for Empress Effects Zoia Effects Pedal
Notes: Custom engineered in the UK for the Empress Effects Zoia Effects Pedal, Decksaver's super durable polycarbonate shell protects against dust, liquid and accidental impact. Precision trimmed for an exact fit whilst accommodating cables, your MPC can sit ready for operation. Slides straight into a flight case or bag ready for transportation. Shields delicate controls and internal components from damage at home, on the road and on stage.
Read more
coming soon $20.80
FORTHCOMING
Decksaver Akai Pro MPK Mini MK3 Keyboard Controller Light Edition Cover
Cat: 801861 Rel: 28 Feb 21
 
Polycarbonate shell cover for Akai Pro MPK Mini MK3 Keyboard Controller - Light Edition
Notes: Light Edition - still made from super durable polycarbonate but reaching you at a more affordable price. Engineered in the UK specifically for the Akai Pro MPK Mini MK3 Keyboard Controller. Custom moulded to fit the contours of the unit whilst leaving USB connections in place, the MPK Mini MK2 can sit ready for operation. Super durable polycarbonate shell protects delicate keys during transportation and slides straight into a flight case or bag for maximum protection. Don't go losing your keys.
Read more
coming soon $22.17
FORTHCOMING
Decksaver Moog Matriarch Synthesiser Cover
Cat: 796096 Rel: 31 Jan 21
 
Polycarbonate shell cover for Moog Matriarch
Notes: The Decksaver Moog Matriarch Synthesiser Cover features an ultra-durable polycarbonate shell, designed to protect from dust, liquid, particulates and accidental impact damage. It will also protect against superficial damage such as scratches or bumps while on the move. The high quality smoke/clear sheen allows you to see the Medusa through the cover, allowing you to see your gear at all times. The smooth and sheen like finish will slide straight into a bag, ideal for the travelling musician.
Read more
coming soon $85.38
FORTHCOMING
Arturia Minilab MKII Inverted Edition 25-Key MIDI Controller Keyboard (limited orange edition)
Cat: 801264 Rel: 28 Feb 21
 
25-key MIDI contrloler keyboard
Notes: The ultimate small-format 25-key MIDI controller in a cool, limited edition color, with software.

MiniLab MkII Orange Edition is a portable MIDI controller keyboard that will have a huge impact on your creative output. Designed to fit in any work space, and featuring 25 slim-keys, 8 RGB pads, 16 rotary knobs, and a fantastic collection of included software like the Analog Lab Lite virtual instrument, this iconic little MIDI controller now comes in a striking new orange color.

Small enough to fit in your laptop bag, MiniLab MkII can follow you on your creative journey, whatever roads it may take you down. Pull up your project and drop some beats in an instant. Lay down some ideas on the train. Control your DAW and mix in your hotel room. Coupling simple, ergonomic design with some of the most inspiring sounds in the industry, MiniLab MkII Orange
Edition will be with you every step of the way.

Small, solid, and packing a punch, MiniLab MkII is a robust little mobile studio solution, and the perfect accomplice for any electronic music performer or producer. Bring all your ideas together with Ableton Live Lite. Multi-track your performances, add effects, warp samples to fit your tempo, and create studio-quality tracks with ease.

Aside from the bold, black color, the Orange Edition also comes with a great selection of bundled software that will help you start making music straight out of the box. With Analog Lab Lite - an introduction to the sounds and synths available in Arturia V Collection - you'll be able to experience the hands-on joy of controlling some of the most iconic keyboard sounds of all time with over 500 sounds. Featuring outstanding integration with Analog Lab Lite, every dial and button is instantly mapped to the parameters of your keyboard sound. Also included, Ableton Lite Live to get your producing straight away. Get learning with the new Melodics app, also included, with 40 learning and interactive exercises.

Included Software:
Arturia Analog Lab Lite
Ableton Live Lite
UVI Grand Piano Model D
Melodics learning app with 40 exercises
Arturia MIDI Control Center

Dimensions:
Product size: 355 x 220 x 50 mm / 13.98 x 8.66 x 1.97 inches
Net weight: 1.5 kg / 3.3 lbs

Gift Box size: 425 x 265 x 80 mm / 16.7 x 10.4 x 3.1 inches Gift Box weight: 1.9 kg / 4.2 lbs Master Pack size (5 pieces): 440 x 425 x 295 mm
Read more
MRP:$118.43 SAVE 17%
coming soon $98.70
FORTHCOMING
2hp Picnic Basket Versatile Modular Lunchbox System
2hp Picnic Basket Versatile Modular Lunchbox System (complete modular synthesiser system)
2hp
Cat: 797226 Rel: 31 Jan 21
 
Modular synthesiser system
Notes: The Flagship Lunchbox.
Read more
MRP:$1,427.84 SAVE 23%
coming soon $1,100.04
FORTHCOMING
2hp Synth Voice Classic Analogue Voice Lunchbox System
2hp
Cat: 797212 Rel: 31 Jan 21
 
Complete synthesizer voice system
Notes: Complete synthesizer voice with analog VCO and VCA, multimode filter (lowpass, highpass, and bandpass), and ADSR envelope for sound shaping.
Read more
MRP:$711.92 SAVE 24%
coming soon $544.47
FORTHCOMING
UDG Ultimate Straight USB 2.0 Type C-B Audio Cable (1.5m, yellow)
UDG
Cat: 795654 Rel: 31 Jan 21
 
USB 2.0 C-B cable
MRP:$15.97 SAVE 17%
coming soon $13.29
FORTHCOMING
UDG Ultimate Straight USB 2.0 Type C-B Audio Cable (1.5m, green)
UDG
Cat: 795517 Rel: 31 Jan 21
 
USB 2.0 C-B cable
MRP:$15.97 SAVE 17%
coming soon $13.29
FORTHCOMING
UDG Ultimate Straight USB 2.0 Type C-B Audio Cable (1.5m, red)
UDG
Cat: 795650 Rel: 31 Jan 21
 
USB 2.0 C-B cable
MRP:$15.97 SAVE 17%
coming soon $13.29
FORTHCOMING
Presonus AudioBox Studio Ultimate Bundle 25th Anniversary Edition Deluxe Hardware & Software Recording Collection *** FREE STUDIO ONE PREMIUM ADD-ON BUNDLE WITH THIS PRODUCT UNTIL 31st DECEMBER 2020 ***
Notes: Everything you need to record and produce- and beyond.
Produce and record like a pro with a single-purchase bundle! The core of this package is the AudioBox USBr 96 audio/MIDI interface and award-winning Studio One recording and production software. You also get PreSonusr' best-selling Eris E3.5 Active Media Reference Monitors and HD7 headphones, allowing you to monitor your work loud and proud or quietly to yourself. Lastly, the M7 dynamic microphone is a superior all-purpose condenser mic ideal for guitar and vocalsiand we even included all the necessary cables and a desktop mic stand.

AudioBox USB 96: Simple, reliable, and portable.
The AudioBox USB 96 is the heart of the AudioBox Studio Ultimate Bundle. This simple, handy little audio/MIDI interface has just the right features for basic recording needs, including two combo mic/instrument inputs and zero-latency monitoring, so you can simply plug in and start recording right away. Bus-powered, built to travel, compatible with most recording software for Mac and Windows, and equipped with high-performance microphone preamplifiers and professional-quality, 24-bit, 96 kHz converters, the AudioBox USB 96 makes high-definition recording easy.

Studio One Artist makes recording a breeze.
No other entry-level recording and production software is this easy to learn and use, yet is capable of creating studio-quality output. Studio Oner Artist lets you work quickly and stay focused on your inspiration, offers unlimited tracks and plug-ins, and delivers features not normally found in entry-level DAWs. Access powerful editing tools without wading through menus. Load and save audio clips, MIDI files, and effects by drag-and-drop. Studio One makes it easy!

Sound you can trust. Eris 3.5
PreSonusr Eris-series studio monitors are used worldwide by audio engineers who need to hear every detail of their recordings. Eris E3.5 employs the same technology as the larger Eris models to deliver studio-quality sound, with a smooth and accurate frequency response. They're compact enough to fit almost anywhere, but still offer robust I/Oiyou can connect them to nearly anything.

Capture every nuance with the M7 condenser microphone.
Get your mic collection off to a good start with the M7 large-diaphragm condenser microphone and desktop stand. Condenser mics are the overwhelming choice of recording studio professionals, enabling you to capture musical details, harmonics, and subtle nuances that would get lost with dynamic mics. Large-diaphragm condenser microphones, like the M7, tend to "warm up" a sound, making them the go-to microphone for recording vocals and a wide range of instruments.

Hear every detail with HD7 professional headphones.
PreSonus' high-definition HD7 headphones take advantage of a patented, semi-open sound chamber to deliver exceptionally deep low frequencies with a balanced and yet powerful bass punch. Accurate midrange and extended treble response let you pick out the fine details of a mix or track. The lightweight, ergonomic design adjusts to any head size, offering a comfortable listening experience during long recording sessions.

Make your own magic.
PreSonus audio interfaces come with everything you need to craft your own mesmerizing spells in the studio. That's why Studio One Artist is included with Presonus every audio interface.Not only that, the Studio Magic Suite of software is also included with Presonus audio interface products.
Read more
MRP:$352.64 SAVE 17%
coming soon $293.86
FORTHCOMING
Mackie Element Series EM-91CU USB Condenser Microphone
Cat: 785658
 
condenser microphone
Notes: Based on Mackie's much-loved EM-91C Condenser mic, this USB version offers the same studio-worthy warmth and clarity you expect with the convenience of USB connecitivty. No knobs, no buttons, just incredible sound without the fuss.

Suitable for remote/work learning, podcasting, live streaming.
Read more
coming soon $53.21
FORTHCOMING
Rebel Technology Wizard Ultra-Portable Synthesiser & Effects Unit
Cat: 800030 Rel: 28 Feb 21
 
Synthesiser & effects unit
Notes: The Wizard is an ultra-portable synthesizer and effects unit. It is capable of running all the OWL Patches available in Rebel Technology's library, and you can write your own patches for it. Supported languages include Cycling'74 Max Gen, Pure data, FAUST and C++.

Read more
MRP:$268.80 SAVE 24%
coming soon $204.04
FORTHCOMING
Rebel Technology Magus Desktop Synthesiser
Cat: 800035 Rel: 28 Feb 21
 
Desktop synthesiser
Notes: Magus is Rebel Technology's new flagship synthesizer, and subject of a recent successful KickStarter campaign. After getting fully funded in only 5 days, the fundraiser went on to reach more than 260% of its target!

If you didn't get to back the KickStarter, now is your chance to order your very own Magus, in Desktop or Eurorack format.
Read more
MRP:$558.89 SAVE 17%
coming soon $465.73
FORTHCOMING
Tesseract Modular VC Logics Dual Logic Gates Module
Tesseract Modular VC Logics Dual Logic Gates Module (dual & stereo / logic synth module)
Cat: 797265 Rel: 31 Jan 21
 
Synth module
Notes: 2 x Logic gates with voltage controlled boolean function selection.

Logic gates are used in order to combine GATE signals to conditional event. For example it can be used to combine the GATE signals from various sequencers to get different patterns.

The module has 2 logic processors, the boolean function can be selected with the potentiometer, the CV input or the push button. The CV input range is 0 to 8V, but the potentiometer will work as an offset, so for example, placing the pot in the center position will allow the use of bipolar i4v CV sources like LFOs etc. The input is protected so voltages over 8v will be trimmed out.

Each processor can work in 2 modes:

-Free: when the boolean function changes the output changes according to the inputs & logic type.

-Quantized: when the boolean function changes the output won't change until there is a change in any of the inputs, that way you won't get out of time beats when using the module for percussions with and LFO in the CV input ...for example.

To change the mode long press the button (1 second) if the mode you've just entered is the 'free' one you'll see a pattern on the leds.

CV input 1 can be set to be a trigger input with a jumper in the back of the module, to work just like the push button, so any incoming trigger will jump to the next boolean function, those functions are:

AND
OR
XOR
NAND
NOR
XNOR

42 mA +12V
10 mA -12V

4 HP
Read more
MRP:$71.86 SAVE 17%
coming soon $59.87
FORTHCOMING
Tesseract Modular GESS Gate Expander For Sweet Sixteen Mk2 Module
Cat: 797249 Rel: 31 Jan 21
 
Synth module
Notes: Gate Expander for Sweet Sixteen mkII.

This is an expander, brings 8 gate inputs for the Sweet Sixteen mkII.

The panel is reversible, so jacks & buttons can be in the left or right side.

The orientation of the 10 pin ribbon cable is marked by the 'do not plug power here!' legend on the PCB, so it could be with the red stripe facing that in both GESS and Sweet Sixteen mkII modules.
Read more
coming soon $22.17
FORTHCOMING
Sensel Travel Case For Morph MIDI Controller (blue)
Cat: 785475
 
Travel case
Notes: Stay organized and mobile while protecting your gear.

The Morph travel case is a convenient way to carry and protect your Morph, overlays, cables, iPad, paintbrushes and any other accessories that you use along with your Morph. Fits a Morph, iPad and 5+ overlays with ease.

Contains:
A padded exterior to protect your Morph from bumps and bruises
An interior sleeve to securely hold your Morph (and iPad)
Interior straps to hold cables, paintbrushes, drumsticks
An external zippered pocket for additional storage.

Specs:
Weight: 0.7 lbs | 319 g
Dimensions: 11 x 8 x 1.4 in | 28 x 20 x 3.4 cm
Read more
MRP:$31.94 SAVE 17%
coming soon $26.60
FORTHCOMING
Equinox Synth VCO Analogue Voltage Controlled Oscillator Module
Cat: 802071 Rel: 28 Feb 21
 
Analogue voltage controlled oscillator module
Notes: The Equinox VCO is based on a timeless analogue design, perfect for the classic analogue sounds.

The module is designed to be the primary sound source for the modular synthesiser. It provides the three main waveforms used in subtractive synthesis: Sawtooth, Triangle and Pulse / Square wave. The three waveforms each have unique characteristics and harmonic makeup, providing the raw materials for synthesising a huge range of acoustic and electronic instruments. Sawtooth waves are commonly used to create brass and string like sounds, whilst a square wave sounds more like woodwind. The VCO also features an onboard mixer, where the waveforms can be combined, giving access to even more timbres and complex waveforms.

The frequency or musical pitch is controlled via the standard 1V/Oct input, allowing control of the module from a wide range of third party sequencers and keyboards. There is also a Coarse frequency knob, as well as a Fine tune, allowing the VCO to be tuned into other VCOs or sound sources. More in-depth synthesis techniques are also available via the FM and PWM controls.

Current Draw: +12V: 20mA, -12V: 20mA

Depth: 25mm

HP: 12HP
Read more
MRP:$126.42 SAVE 17%
coming soon $105.35
FORTHCOMING
Michigan Synth Works Typhoon Module (black faceplate)
Michigan Synth Works Typhoon Module (black faceplate) (delay/dual & stereo/effect/pitch shifter/reverb/sampling synth module)
Cat: 802262 Rel: 18 Jan 21
 
Audio processor module
Notes: 16HP Deluxe Clouds Clone with individual controls for each Parameter, VCAs for the left and right channel, additional storage so ALL extra functions are available at once.

Anodized natural aluminium or black aluminum panel.

16HP

25mm Deep

140/35 mA +12/-12V
Read more
MRP:$315.38 SAVE 31%
coming soon $216.23
FORTHCOMING
Michigan Synth Works XVI Desktop USB 16 Channel Fader Bank Surface Controller (black faceplate)
Notes: XVI Desktop is a 16 channel desktop control surface. Please note: This is NOT a 16n and is NOT compatible with any 16n related software.
Read more
MRP:$452.44 SAVE 31%
coming soon $311.60
FORTHCOMING
Michigan Synth Works SY0.5 Analogue Drum Module (black faceplate)
Cat: 802343 Rel: 18 Jan 21
 
Analogue drum module
Notes: A faithful 1:1 recreation of a single channel of the Pearl Syncussion SY-1. The circuit uses all modern versions of original parts (all the opamps are still in production!) and equivalent parts for out of production parts.

10 HP, 20mm Deep

Current Draw: +12V 130 mA, -12V 20 mA

Output at eurorack levels

CV modulation of Decay Time

CV modulation of Filter Cutoff

CV Modulation of OSC pitch

CV input range +/-10V

Instructions:

Mode functionlity: There are two options for mode, one will advance the osc mode with a trigger in the direction it was last selected manually (up or down) or you can select the mode with a CV, 0-5V. You can toggle between these functions by long pressing both buttons

Power header orientation: This the PSIpower scheme so there is no polarity on the power header, either way is fine.


Read more
MRP:$322.03
coming soon $311.60
FORTHCOMING
Decksaver Sequential Pro 3 Synthesiser Cover
Cat: 801881 Rel: 28 Feb 21
 
Polycarbonate shell cover for Sequential Pro 3 Synthesiser
Notes: Custom engineered in the UK for the Sequential Pro 3 Synthesiser, Decksaver's super durable polycarbonate shell protects against dust, liquid and accidental impact. Precision trimmed for an exact fit whilst accommodating cables, your MPC can sit ready for operation. Slides straight into a flight case or bag ready for transportation. Shields delicate controls and internal components from damage at home, on the road and on stage.
Read more
coming soon $46.56
FORTHCOMING
Decksaver Pioneer DJ Toraiz Squid Multitrack Sequencer Cover
Cat: 801848 Rel: 28 Feb 21
 
Polycarbonate shell cover for Pioneer DJ Toraiz Squid Multitrack Sequencer
Notes: Custom engineered in the UK for the Pioneer DJ Toraiz Squid Multitrack Sequencer, Decksaver's super durable polycarbonate shell protects against dust, liquid and accidental impact. Precision trimmed for an exact fit whilst accommodating cables, your MPC can sit ready for operation. Slides straight into a flight case or bag ready for transportation. Shields delicate controls and internal components from damage at home, on the road and on stage.
Read more
coming soon $43.23
FORTHCOMING
Arturia Keylab 88 MKII Black Edition Hammer Action 88-Note Controller Keyboard
Cat: 801265 Rel: 28 Feb 21
 
88-key controller keyboard
Notes: The ultimate hammer action 88-note controller keyboard in black including award winning Arturia software instruments now featuring DAW pro-control for seamless workflow.

The ultimate piano-feel master controller keyboard goes dark mode. Professional feel, deep integration, and absolute control over your performance - available with a luxurious black aesthetic for a limited time.

High quality robust metal frame construction with real wood side panels, highlight the sleek world-class design. Weighing in at only 14kg, the KeyLab 88 MkII Black Edition is perfect for studio and stage, and includes a laptop extension shelf and removable iPad/music stand.

The KeyLab 88 MkII Black Edition comes with the new Analog Lab virtual instrument featuring over 8,000 sounds from our award-winning V-Collection Series. Also included are the full versions of Piano V, Wurli V, and Vox Continental V, along with Ableton Live Lite. With plug-and-play auto-mapping, your creative workflow is quick and seamless as you browse through the included software instruments and control your DAW. The KeyLab 88 MkII Black Edition even includes unique magnetic panel overlays for the most popular DAWs and takes the guesswork out of playing, recording, and mixing.

The KeyLab 88 MkII Black Edition features CV/gate connectivity so you can also control your modular rig and vintage synths. It also includes three Aux pedal inputs, Expression, MIDI, USB, and Sustain. There's even a CV input for external analog controllers. Used stand alone, the KL88 MkII can be powered from an external power supply or directly from its USB port.

The finest feeling 88-note hammer action controller keyboard looks great, is built for the road, and comes with top-quality virtual instruments. The KeyLab 88 MkII Black Edition isn't just another MIDI controller, it's a gateway to a better music-making experience.

Included Software
Analog Lab, Piano V, Wurli V, Vox Continental V, and Ableton Live Lite
MIDI Control Center
Read more
MRP:$1,103.15 SAVE 17%
coming soon $919.29
FORTHCOMING
2hp Effects Rack High Fidelity Effects Chain Lunchbox System
2hp
Cat: 797223 Rel: 31 Jan 21
 
High-fidelity effects chain
Notes: The ultimate effects send to bring your sounds to life. With DSP onboard each effect, high fidelity processing can turn your dry sound into an ethereal sonic landscape using our most popular effects modules.
Read more
MRP:$854.31 SAVE 24%
coming soon $653.15
FORTHCOMING
ALM Custom 3.5mm Male Mono Eurorack Patch Cables (15cm, blue, pack of 5)
Cat: 801479 Rel: 28 Feb 21
 
Pack of 5 3.5mm blue patch cables
Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.
Read more
coming soon $6.93
FORTHCOMING
ALM Custom 3.5mm Male Mono Eurorack Patch Cables (60cm, blue, pack of 5)
Cat: 801528 Rel: 28 Feb 21
 
Pack of 5 3.5mm patch cables
Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.
Read more
coming soon $9.16
FORTHCOMING
ALM Custom 3.5mm Male Mono Eurorack Patch Cables (60cm, red, pack of 5)
Cat: 801520 Rel: 28 Feb 21
 
Pack of 5 3.5mm red patch cables
Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.
Read more
coming soon $9.16
FORTHCOMING
ALM Custom 3.5mm Male Mono Eurorack Patch Cables (15cm, purple, pack of 5)
Cat: 801484 Rel: 28 Feb 21
 
Pack of 5 3.5mm purple patch cables
Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.
Read more
coming soon $6.93
FORTHCOMING
UDG Creator Akai MPC One Hardcase (black)
UDG Creator Akai MPC One Hardcase (black) (music production controller hardcase)
UDG
Cat: 795498 Rel: 31 Jan 21
 
Hard case for Akai MPC One controller
Notes: A Digital DJ looking for a professional, durable case solution for your Akai MPC One controllers? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Akai MPC One controllers, these cases are perfect for the travelling DJ that needs to protect their equipment.

Specifications:

Color: Black
Weight: 0,56 kg / 1.232 lbs
Outer Dimensions (W x H x D): 38.3 x 28.6 x 6.7 cm | 15.1 x 11.2 x 2.6 inch
Inner Dimensions (W x H x D): 37.3 x 27.6 x 5.7 cm | 14.6 x 10.8 x 2.2 inch
Material: Durashock molded EVA foam
Protection: Soft fleece interior

Extra's:
Heavy-duty handle
Convenient carry handle
Easy grip zipper puller

Fits: Akai MPC One Controller

Please note: The Akai MPC One Controller is not included in this purchase, it is shown for demonstration purposes only.
Read more
MRP:$59.88 SAVE 17%
coming soon $49.89
FORTHCOMING
UDG Ultimate Straight USB 2.0 Type C-B Audio Cable (1.5m, black)
UDG
Cat: 795512 Rel: 31 Jan 21
 
USB 2.0 C-B cable
MRP:$15.97 SAVE 17%
coming soon $13.29
Items 51 to 100 of 266 on page 2 of 6
«  1  2  3  4  5  6  »

Filter

Coming Soon: Studio Equipment
Close