安全购物

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

安全购物

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Coming Soon: Studio Equipment

首页  Coming Soon  

Studio Equipment

Options
Items 201 to 250 of 269 on page 5 of 6
«  1  2  3  4  5  6  »
FORTHCOMING
AniModule AnVilope Module
AniModule AnVilope Module (clock generator / envelope generator / LFO synth module)
Cat: 794381 Rel: 31 Dec 20
 
Envelope generator module
Notes: A Simple, Affordable, 4HP, Analog Envelope Generator.

Attack, Decay, Release... Simple.

- Envelope Out 0V to +7V
- Loop function so you can use it as a Variable Wave-Shape LFO / Timer
- Inverted out that goes from +7V to 0V

Function:
When the gate is High the envelope will rise and cycle through it's phases.
When gate goes low again the envelope will revert to the release phase.

If the Gate is longer than the ADR phases, the decay will play out then go to release and the envelope will end after the release.

Sprinkle them all over your system!

4HP Depth : 28mm
Read more
MRP:$114.91 SAVE 17%
coming soon $95.75
FORTHCOMING
Tesseract Modular Douts Direct Outs Module For Tex Mix
Cat: 800365 Rel: 28 Feb 21
 
Mixer/multiple/utility synth module
Notes: Direct Outs for TexMix & 3,5mm to 6,3mm converter.

This is a breakout box for the direct outs of the TexMix. Each module has 8 outputs so it could have 2 '4MonoChannels' connected or 1 '4StereoChannels'.

Without connecting the ribbon cable it's a 3,5/6,3 adapter.

The orientation of the 8 pin ribbon cable is marked by the 'DIRECT OUTS ' legend on the PCB of the channel expanders (mono or stereo) and a white line in the DOUTS input header.
Read more
MRP:$34.74 SAVE 17%
coming soon $28.94
FORTHCOMING
Sensel Azerty Tactile Keyboard Overlay For Morph MIDI Controller
Cat: 785471
 
Overlay
Notes: Turn the Morph into a wireless keyboard with one of our 3 keyboard overlays. Boost your mobile productivity with tactile key action, function keys, media controls, and customizable shortcuts. Use the SenselApp to adjust for Windows and Mac layouts, so your muscle memory stays intact!

Features:
Soft and quiet, with mechanical feedback - feels fantastic to type on
Wireless Bluetooth connectivity with PC, Mac, iOS (iPhones, iPads) and Android
Hotkeys for PC/Mac
Trackpad below space bar

Specs:
Weight: 0.4 lbs | 182 g
Dimensions: 9.5 x 5.5 x 0.3 in | 24 x 14 x 0.8 cm

*This overlay is designed to be used with the Sensel Morph. So if you don't already own a Morph, pick up the Morph with QWERTY, Morph with AZERTY, or Morph with DVORAK.
Read more
MRP:$45.43 SAVE 17%
coming soon $37.85
FORTHCOMING
Sensel Innovator's Overlay For Morph MIDI Controller
Cat: 785466
 
Overlay
Notes: Quickly and easily design fully custom layouts with drag-and-drop tools in the Sensel App, export and print on paper, and then secure paper under the transparent Innovator's Overlay.

Quickly iterate with the Innovator's Overlay before you 3D-print your custom design to make sure its just right.

With Sensel's open-source API, the Innovator's Overlay provides an ideal medium for your creations.
*This overlay is designed to be used with the Sensel Morph. So if you don't already own a Morph, pick up the Morph with Innovator's Overlay.
Read more
MRP:$45.43 SAVE 17%
coming soon $37.85
FORTHCOMING
Sensel Video Editing Overlay For Morph MIDI Controller
Cat: 785467
 
Overlay
Notes: Put simply, the Video Editing Overlay (VEO) is a specialized keyboard for video editing, designed to simplify your workflow.
But it's also so much more. Navigate with ease using the jog wheel and force-sensitive shuttle controls. Speed up your workflow by reducing complex multi-finger shortcuts to a single tap. Use Sensel's default mapping or create your own custom mappings.
Go here for reviews about the VEO, and visit our blog post for more details.
*The VEO is designed to be used with the Sensel Morph. So if you don't already own a Morph, pick up the Morph with Video Editing Overlay.

Software Compatibility
By default, the key commands on the VEO are mapped for with Adobe Premiere Pro. However, it can also be easily remapped in the SenselApp to adapt to any editing suite, such as Final Cut Pro, Luma Fusion, or DaVinci Resolve.
Read more
MRP:$45.43 SAVE 17%
coming soon $37.85
FORTHCOMING
Sensel Travel Case For Morph MIDI Controller (light gray)
Cat: 785478
 
Travel case
Notes: Stay organized and mobile while protecting your gear.

The Morph travel case is a convenient way to carry and protect your Morph, overlays, cables, iPad, paintbrushes and any other accessories that you use along with your Morph. Fits a Morph, iPad and 5+ overlays with ease.

Contains:
A padded exterior to protect your Morph from bumps and bruises
An interior sleeve to securely hold your Morph (and iPad)
Interior straps to hold cables, paintbrushes, drumsticks
An external zippered pocket for additional storage.

Specs:
Weight: 0.7 lbs | 319 g
Dimensions: 11 x 8 x 1.4 in | 28 x 20 x 3.4 cm
Read more
MRP:$32.07 SAVE 17%
coming soon $26.71
FORTHCOMING
Equinox Synth VCA Analogue Voltage Controlled Amplifier Module
Cat: 802082 Rel: 28 Feb 21
 
Analogue voltage controlled amplifier module
Notes: The VCA is all about controlling the volume of the signal, both attenuation and a bit of amplification. All without distorting the signal. The Equinox VCA is based on the very high performance THAT Corp 2181 Blackmer trimmable VCA ICs, often found in top end studio hardware. We have kept component count to a minimum to ensure the audio signal path is kept as clean as possible.

The two controls on the Equinox VCA are for overall volume and the CV Depth. The CV input controls how much the signal is attenuated or amplified, this would usually be controlled by an envelope generator, such as the Equinox ADSR. This gives the artist control over how the amplitude or volume of a sound evolves over time. From hard hitting kicks to gently evolving pads, the VCA is the primary module for precise volume control within the modular synthesiser.

Current Draw: +12V: 20mA, -12V: 20mA

Depth: 25mm

HP: 4HP
Read more
MRP:$93.53 SAVE 17%
coming soon $77.94
FORTHCOMING
Edifier 4003653 SS02 Speaker Stands For S2000Pro /S1000DB/S1000MKII (pair, brown/black)
Cat: 794311
 
Paired 26.5" wood grain speaker stands for S2000Pro /S1000DB/S1000MKII
Notes: The S2000Pro/S1000db/S1000MKII stands are a great addition to any home or studio audio set up. It adds style and functionality all in one. The S2000pro/S1000db/S1000MKII stands are a breeze to set up and enhances the look and feel of any environment its in. The atmosphere changes once we set our eyes on the clean lines and wooden finish of these speaker stands.

The well-designed S2000pro/S1000db/S1000MKII speaker stands place the speaker on a solid platform, which helps achieve the best overall sound quality, especially bass. The elegant design negates the effect that vibrations may cause.

Hollowed design - ready to fill with sand to increase stability and eliminate resonance.
Read more
coming soon $161.45
FORTHCOMING
Edifier 4004964 R1280DBs Bluetooth 5.0 Wireless Desktop/Bookshelf Speakers (black)
Cat: 794321
 
42-watt paired Bluetooth 5.0 speakers
Notes: Edifier 4004964 R1280DBs Black Powered Bluetooth 5.0 WirelessDesktop/Bookshelf Speakers Pair 42 Watts With Built in Amp and MultiInputs Includes Remote Control and Cables (Black)

Multiple Inputs: Optical, Coaxial, Bluetooth, Dual RCA, Subwoofer output

Removable Mesh Grille - The protective grill can effectively protect your speakers from dirt and other particles and can be easily removed for careful cleaning of speaker face.

Sub-out & OPT/COAX Inputs - When connected the sub-out automatically detects the subwoofer and activates the digital crossover. Optical and coaxial inputs make sure you will always enjoy music with lossless sound quality. Dual RCA inputs allow you to connect to two devices at the same time. Connect to your devices such as phone, PC, laptop, tablet or gaming console with included Fiber Optical input cable, RCA to RCA audio cable, and 3.5 mm-RCA audio cable, eliminates the need to switch cables.

Classic Wood Finish - These impressive speakers are made from MDF wood, designed to effectively prevent resonance. You will love how perfect it fits into your living room, study room, or bedroom.

Precise Control - The adjustable knobs on the side panel of the speaker allow you to adjust the bass, treble, and volume more accurately, press the volume dial to toggle input sources.

Wireless Remote - Adjust volume, mute/unmute, switch OPT/COAX mode, switch line-in, Bluetooth mode and switch sound field extension with the wireless remote, no longer need to heft yourself off of the couch every time you want to make some adjustments.

TOTAL POWER OUTPUT: R/L: 21W+21W RMS

BLUETOOTH VERSION: Qualcomm 3003 V5.0

FREQUENCY RESPONSE: 51Hz-20KHz

INPUT: LINE IN 1, LINE IN 2, Optical, Coaxial, Bluetooth

DRIVER UNIT: F13mm tweeter unit + 4-inch mid-woofer

SIGNAL-TO-NOISE RATIO: =85dBA

INPUT SENSITIVITY: LINE IN1 R/L:500i50mV, LINE IN2 R/L:600i50mV, Optical /Coaxial R/L:350i50mFFS,Bluetooth R/L:700i50mFFS

Includes RCA to RCA cable, RCA to 3.5mm cable, Fiber Optic input cable, Speaker Connnecting cable, Remote Control
Read more
coming soon $145.86
FORTHCOMING
Sensel Gaming Overlay For Morph MIDI Controller
Cat: 785468
 
Overlay
Notes: Remember all the times when you'd press harder on the game controller buttons hoping it would make you go faster? We do. In fact, those moments were at the top of our minds when we were creating the Gaming Overlay. Now, you can use pressure, gestures, and the simple layout of the device to beat your opponent and add that extra missing dynamic to your gaming.
*This overlay is designed to be used with the Sensel Morph. So if you don't already own a Morph, pick up the Morph with Gaming Overlay.

Compatibility
The Gaming Overlay acts as a USB game controller, so it is compatible with anything a standard gamepad is. While most devices support this standard, not every game does, so you may need to use emulation software for some games. You can find more details in the Morph user guide.
Read more
MRP:$45.43 SAVE 17%
coming soon $37.85
FORTHCOMING
Sensel Qwerty Tactile Keyboard Overlay For Morph MIDI Controller
Cat: 785469
 
Overlay
Notes: Turn the Morph into a wireless keyboard with one of our 3 keyboard overlays. Boost your mobile productivity with tactile key action, function keys, media controls, and customizable shortcuts. Use the SenselApp to adjust for Windows and Mac layouts, so your muscle memory stays intact!

Specs:
Weight: 0.4 lbs | 182 g
Dimensions: 9.5 x 5.5 x 0.3 in | 24 x 14 x 0.8 cm
Read more
MRP:$45.43 SAVE 17%
coming soon $37.85
FORTHCOMING
Sensel Travel Case For Morph MIDI controller (pink)
Cat: 785476
 
Travel case
Notes: Stay organized and mobile while protecting your gear.

The Morph travel case is a convenient way to carry and protect your Morph, overlays, cables, iPad, paintbrushes and any other accessories that you use along with your Morph. Fits a Morph, iPad and 5+ overlays with ease.

Contains:
A padded exterior to protect your Morph from bumps and bruises
An interior sleeve to securely hold your Morph (and iPad)
Interior straps to hold cables, paintbrushes, drumsticks
An external zippered pocket for additional storage.

Specs:
Weight: 0.7 lbs | 319 g
Dimensions: 11 x 8 x 1.4 in | 28 x 20 x 3.4 cm
Read more
MRP:$32.07 SAVE 17%
coming soon $26.71
FORTHCOMING
Edifier 4004971 R1700BTs Bluetooth 5.0 Wireless Bookshelf Speakers (pair, brown)
Cat: 794344
 
Paired 66-watt bookshelf Bluetooth 5.0 speakers
Notes: Edifier 4004971 R1700BTs Powered Bluetooth 5.0 Wireless Bookshelf Speakers Pair 66 Watts With Built in Amp and Multi Inputs Includes Remote Control and Cables (Brown)

Rich and Detailed Sound

Soundfield Spacializer - Soundfield Spatializer simulates a larger soundstage with the touch of a button. This unique feature creates wide-filed sound by optimizing each channel, sending out opposite signals to eliminate mutual interference and improve separation.

Impressive Wood Finish - MDF wood with walnut wood finish-vinyl makes it a perfect addition to your living room, office, or study.

Bluetooth 5.0 with Qualcomm aptX - No wires required! Connect to devices using Bluetooth 5.0 technology. Enjoy listening from your phone, laptop, or tablet with wireless connection, works with iOS, Android, Mac, or Windows devices.

Eagle Eye Tweeter - 30W + 36W RMS undistorted power, 4 inch woofer, and 19mm silk dome tweeter, the Edifier R1700BTs active Bluetooth bookshelf speakers make even the hardly-noticeable sounds very clear. And the DSP(Digital Signal Processing) and DRC (Dynamic Range Control) helps to minimize distortion for improved audio even at low volume.

Multiple ways to connect - When connected the sub-out automatically detects the subwoofer and activates the digital crossover. Dual RCA inputs allow you to connect to two devices at a time. Connect to your devices such as phone, PC, laptop, tablet, or gaming console with RCA to RCA audio cable, and 3.5 mm-RCA audio cable, eliminates the need to switch cables.

Built-in Controls - Convenient dials on the side panel of the speaker allows you to adjust the bass, treble, and volume, press the volume dial to toggle between inputs.

Wireless Remote - Adjust volume, mute/unmute, switch inputs, Bluetooth, select sound field extension, and line-in mode with the wireless remote, no need to leave the couch.

Removable Grill - Protects your speaker drivers, easy to remove for cleaning.

TOTAL POWER OUTPUT: R/L(high): 15W+15W, R/L(mid-low): 18W+18W

BLUETOOTH VERSION: Qualcomm 3031/V5.0

INPUT SENSITIVITY: LINE IN 1: 700i50mV, LINE IN 2: 550i50mV, Bluetooth: 400i50mV

INPUT: LINE IN 1, LINE IN 2, Bluetooth

DRIVER UNIT: F19mm tweeter unit + 4 inches woofer

SIGNAL-TO-NOISE RATIO: =85dBA

FREQUENCY RESPONSE: 52Hz-20KHz

Includes: RCA to RCA cable, RCA to 3.5mm cable, Speaker Connecting cable, Remote Control, User Manual
Read more
coming soon $164.79
FORTHCOMING
AniModule DD Dual VCA Module
AniModule DD Dual VCA Module (CV modulation / panning / VCA / dual stereo synth module)
Cat: 794391 Rel: 31 Dec 20
 
Dual VCA module
Notes: A Dual VCA for Audio or CV.

Mod In 1 is Buffered, Inverted then Normalled to Mod In 2, to facilitate stereo panning and VC CrossFading without a bunch of support modules.

Don't want it? Just turn the attenuator down or plug a signal of your choosing in to the Mod In 2.

Current Draw: +12V = 25mA, -12V = -22mA

8HP, 28mm Deep
Read more
MRP:$205.77 SAVE 17%
coming soon $171.47
FORTHCOMING
Edifier 4004988 S1000DBMKII Bluetooth 5.0 Wireless Active Bookshelf Speakers (pair, brown)
Cat: 794392
 
Paired 120W Bluetooth 5.0 powered bookshelf speakers with built-in amp and multi inputs
Notes: Turn on the Speaker, Juice up the World - S1000MKII Audiophile Active Bookshelf 2.0 Speaker.

Includes Remote Control and Cables

120 Watts Stunning Sound Performance - A new Class D Amp boosts the system's already impressive power to a new height, crank the volume while still maintaining crystal clear audio.

Bluetooth 5.0 with aptX HD Decoding - Stream high-quality audio wirelessly with reduced latency and increased stability.

Titanium Dome Tweeter - A titanium dome is a high-quality unit that can only use in hi-fi level high-end speakers. Restore high-frequency signals up to 40KHz to obtain a clearer, brighter, transparent, and pure tone.

Simpler but Much More Stylish - Aluminum bass speaker for surge and wave bass, pure sound with advanced titanium dome tweeter. Designed with classic wooden side panels, the S1000 MKII is angled to ensure front-facing drivers positioned for optimum performance without compromise.

Metal Diaphragm, Medium Bass Unit - The 5.5-inch aluminum alloy mid-woofer unit has the characteristics of high strength and low distortion. By the precise analysis of the KLIPPEL system in Germany and the advantages of DSP full digital electronic frequency divider, the performance of the unit is more accurate, faster, cleaner, and more powerful.

DSP Digital Audio Processing - Built-in Texas instruments DSP professional audio processing chip TLV320AIC3254, and use its miniDSP to complete electronic frequency division and dynamic management for accurate control of frequency division point, so that the speaker can better display the sound details.

Multiple Inputs Connection - With its optical, coaxial, and auxiliary inputs, it can connect to multiple devices such as TV sets, TV boxes, Blu-ray player, game console, CD player, DVD, mobile phone, computer, tablet, or other devices.

Wireless Remote Control - Swap inputs, playback, or adjust the volume with the included remote while still able to sit on the sofa, help you to take full control of your sound wirelessly.

TOTAL POWER OUTPUT: RMS 25W×2(Treble) +35W×2(Mid-range bass)

FREQUENCY RESPONSE: 45Hz~40KHz

MIDRANGE / BASS UNIT: 5.5 inch

SIGNAL-TO-NOISE RATIO: = 90dBA

INPUT SENSITIVITY: Line in 1:750i50mV / Line in 2 :900i50mV OPT, COX: 350 mFFs i 50 mFFs Bluetooth: 450i50mV

Treble Unit: 1 Inch

Includes: RCA to RCA cable, RCA to 3.5mm cable, Speaker Connecting cable, Remote Control, User Manual
Read more
coming soon $361.88
FORTHCOMING
AniModule Lil' Monster VCO Module
AniModule Lil' Monster VCO Module (oscillator synth module)
Cat: 794393 Rel: 31 Dec 20
 
VCO module
Notes: At 8HP and 28mm deep this is A Frightening little Oscillator with Monstrous PWM, Sick, Sick Sync, and Terrifying FM capabilities!!

Great 1V/Oct tracking

Range from below to above the audible

All Waveforms respond to your Sync Input signal

Current Draw: +12V = 21mA, -12V = -21mA 8HP, 29mm Deep
Read more
MRP:$249.87 SAVE 17%
coming soon $208.22
FORTHCOMING
AniModule MixMan Module
AniModule MixMan Module (attenuater / mixer/ multiple / polariser / utility synth module)
Cat: 794394 Rel: 31 Dec 20
 
Mixer multiple & CV manipulator module
Notes: This quintessential module, while seeming fairly utilitarian, is practically Indispensable.

At only 8HP wide and 30mm deep
You can Mix, Mult, Invert and Offset your Audio and CV.

For starters there is a 3 Channel Mixer with x3 Buffered Outs.
Then there is a dedicated Analog Inverter.
Last but not least there is an Offset Manipulator.

The Offset Manipulator is designed to take a signal and combine it with an offset.
It will work fine without a signal coming in to it though. Just take the signal from the Offset Manipulator out and dial in your desired voltage.

The Offset Manipulator Out is Normalled to the 3rd Mix In Jack Switch. If you don't want your Mixer Signals Offset, Connect a plug to the 3rd Mix In Jack First, or just dial down the 3rd attenuator to 0.

The Mixer Out is Normalled to the Inverter In Jack Switch. That way you can have an inverted version of your MixOut at the Inverter Out without using an extra patch cable
Read more
MRP:$132.28 SAVE 17%
coming soon $110.22
FORTHCOMING
Edifier 4004995 S2000MKIII Bluetooth 5.0 Wireless Bookshelf Speakers (pair, brown)
Cat: 794400
 
Paired Bluetooth 5.0 powered 130W speakers with built-in amp multi inputs
Notes: Edifier 4004995 S2000MKIII Powered Active Bluetooth 5.0 Wireless Bookshelf Speaker 2.0 Pair 130 Watts With Class D Built in Amp and Multi Inputs

Includes IR Remote Control and Cables (Brown)

Turn on the Speaker, Shake the World - S2000MKIII Powered Bluetooth Bookshelf Speaker.

Bluetooth V5.0 with Qualcomm aptX HD decoding - Wirelessly transmit lossless and high-definition music signals, so that Bluetooth playback can obtain the same music quality as wired digital transmission.

Continuous Undistorted Power - The continuous undistorted power is treble 15Wx2 RMS plus mid-range bass 50Wx2 RMS, which can effortlessly express vocal scenes of large spaces.

Professional Wireless Remote Control - It comes with wireless remote control for convenient volume adjustment, audio source switching, mode selection, switch on and off.

Dual DSP Digital Audio Processing - Two professional digital processing DSP chips to independently manage the electronic frequency division and dynamic management of the high-pitched and medium-bass channel, to precisely control the frequency distribution and fully release the characteristic advantages of the high-pitched and low-pitched units.

Multi-Input, Simultaneously Connected - Edifier's active speakers allows for hooking up multiple devices to the same speaker. In addition to Bluetooth connection, we also have wired digital input plus wired analog input to permit interfacing to multiple devices such as TV sets, TV boxes, Blu-ray players, game consoles, CD/DVD players, smartphones, computers, tablets, and other devices.

Switch Between Four EQ Preset Modes - Swap between four EQ preset modes (Monitor, Dynamic, Classical, and Vocal) with the press of a button. These four sound modes will highlights distinctive tones in varying genres of music and audio.

Treble, Bass, and Volume are Individually Adjustable - The treble, bass, and volume are individually adjustable. 50-level high-precision adjustment of the master volume, and smart startup volume protects both your hearing and the speaker from harm. The speaker casing is made out of a wood veneer while the knobs are made from metal and have a professional-grade feel.

Digital Display is Intuitive and Clear -Display selected input status of the speaker (source, sound effect modes, volume) with a clear OLED LCD screen, all you need to do is take a look at the LCD screen, and you'll know exactly which input you are on.

Wireless Remote Control - Equipped with remote control for your convenience. Now you can adjust volume, switch sound source, select mode, and power on/off the speaker wirelessly, free you from the hassle of the constant press on the speaker's buttons.

TOTAL POWER OUTPUT: L/R (treble): 15W+15W RMS L/R, (mid-range bass): 50W + 50W RMS

NOISE LEVEL: =25dB(A)

FREQUENCY RESPONSE: 45Hz~40KHz

SIGNAL-TO-NOISE RATIO: =90dB(A)

INPUT SENSITIVITY: • Line 1 input: 800i50mV, Line 2 input: 600i50mV Bluetooth input: 450i50mFFs Optical/Coaxial input: 350i50mFFs

Includes: RCA to RCA cable, RCA to 3.5mm cable, Speaker Connecting cable, Remote Control, User Manual
Read more
coming soon $409.76
FORTHCOMING
AniModule LogicOgic Module
AniModule LogicOgic Module (clock modulater / frequency divider / logic synth module)
Cat: 794401 Rel: 31 Dec 20
 
Logic module
Notes: This is a handy module. It's nice to have a few ORs and ANDs around when you're fiddling around with your clocks and percussives.

The Output from FlipFlop1 Q is normalled to the FlipFlop2 Input via the jack switch.

The NOT Q outs from the FlipFlops are fun to stagger your clock pulses or use as a Sub-Oscillator. The Inverter/Buffer can be sent to a Gate-Trigger converter and back to the OR to double your clock.

2 - FlipFlops (Q and NOT Q outs for each)

2 - OR Gates

2 - AND Gates

1 - Buffer/Inverter

All the outs are Buffered.

55 mA +12V
38 mm deep
O 4.00 (2 Votes) Average Rating
Read more
MRP:$263.23 SAVE 17%
coming soon $219.35
FORTHCOMING
Equinox Synth VCF Analogue Voltage Controlled Filter Module
Cat: 802077 Rel: 28 Feb 21
 
Analogue voltage controlled filter module
Notes: The VCF is possibly one of the most important modules within a modular synthesiser. The Equinox VCF was designed with two classic instruments in mind: the SH-101 and the TB-303, both possessing key sonic elements in electronic music culture. Combined with the VCO, the Equinox VCF provides an incredibly rich palette of squelches and squeals, from throbbing basslines through to mix cutting leads. With two VCOs connected to the two mixed inputs, this module can produce the fattest of sounds.

The main role of the Low Pass Filter in subtractive synthesis is to remove higher harmonics from a waveform, altering the sound into new timbres. Filtering all harmonics from a waveform will result in just a sine wave oscillating at the fundamental frequency, great for hard punching kick drums. An alternative method for producing sine waves is to crank the Resonance control to maximum, causing the filter to go into self oscillation. The pitch of this very pure sine wave can now be controlled either via the Cutoff knob or the CV In.

Current Draw: +12V: 20mA, -12V: 20mA

Depth: 25mm

HP: 8HP
Read more
MRP:$113.58 SAVE 17%
coming soon $94.64
FORTHCOMING
Equinox Synth ADSR Analogue Attack Decay Sustain & Release Module
Cat: 802084 Rel: 28 Feb 21
 
Analogue attack decay sustain & release module
Notes: The ADSR Envelope Generator's primary role in the modular synthesiser is to take a Gate input and generate dynamic control voltages which change over time. The Gate is usually provided by a sequencer or keyboard, when a key is pressed the gate goes high, which the key is released the gate goes low. The code within the module translates this gate signal to the various stages of the control envelope: Attack, Decay, Sustain and Release. This control voltage out can then be patched into a VCA to control volume, VCF to control frequency cutoff or VCO to control other modulation parameters such as FM or PWM.

Linear vs Exponential

The human ear hears both volume and pitch exponentially, so having exponential control over these elements is crucial. It's usual to drive a VCA with an ADSR, however only one of these should be exponential.

Linear ADSR vs Linear VCA: No exponential control.
Expo ADSR vs Linear VCA: Good exponential control.
Linear ADSR vs Expo VCA: Good exponential control.
Expo ADSR vs Expo VCA: Too much exponential control.

The Equinox VCA and VCF are exponential, the VCO has both exponential and linear control.

Current Draw: +12V: 20mA, -12V: 20mA

Depth: 25mm

HP: 8HP
Read more
MRP:$93.53 SAVE 17%
coming soon $77.94
FORTHCOMING
Equinox Synth LFO Smart Digital Low Frequency Oscillation Module
Cat: 802087 Rel: 28 Feb 21
 
Digital low frequency oscillation module
Notes: The Equinox LFO provides control over the Rate, Depth and Offset, and has two waveforms: sine and square. These can be patched into all modules which have a control voltage input, giving access to a huge range of synthesis techniques such as FM and PWM. The depth control sets the amplitude of the signal, from 5VP right down to a DC level. The offset control moves the signal either up towards +5V or down towards -5V. The module is smart enough to know when the depth is maximum, there's no room for the offset to move, but when the depth is at it's minimum, i.e. DC, the offset can move that level anywhere between +5V and -5V. A sync input is also provided, resetting the waveform so it can be synced with sequencers or other modulation sources within the modular synthesiser.

Current Draw: +12V: 20mA, -12V: 20mA

Depth: 25mm

HP: 8HP
Read more
MRP:$93.53 SAVE 17%
coming soon $77.94
FORTHCOMING
Michigan Synth Works uBurst Module (black faceplate)
Michigan Synth Works uBurst Module (black faceplate) (delay/digital/effect/pitch shifter/sampling synth module)
Cat: 802158 Rel: 18 Jan 21
 
Audio processor module
Notes: 8HP Micromodule based on Opensource Clouds
Read more
MRP:$227.15
coming soon $205.99
FORTHCOMING
Michigan Synth Works uGrids Module (black faceplate)
Cat: 802164 Rel: 18 Jan 21
 
Drum pattern sequencer module
Notes: 8HP Micromodule of Opensource Grids
Read more
MRP:$207.11 SAVE 13%
coming soon $180.37
FORTHCOMING
Michigan Synth Works nRings Module (black faceplate)
Michigan Synth Works nRings Module (black faceplate) (external/filter/oscillator synth module)
Cat: 802165 Rel: 18 Jan 21
 
Micro module
Notes: 6HP Micromodule of Opensource Rings
Read more
MRP:$227.15
coming soon $205.99
FORTHCOMING
Michigan Synth Works Plancks II Module (black faceplate)
Michigan Synth Works Plancks II Module (black faceplate) (attenuator/CV modulation/quad/sequencer/VCA synth module)
Cat: 802186 Rel: 18 Jan 21
 
Mixer/keyframer module
Notes: 8HP Micromodule based on Opensource Frames.

This devices comes with Parasites 1.1 firmware
Read more
MRP:$227.15
coming soon $205.99
FORTHCOMING
Michigan Synth Works Beehive Module (black faceplate)
Cat: 802188 Rel: 18 Jan 21
 
Micro module
Notes: 8HP micro module based on Opensource Plaits.

Stock Plaits firmware
Read more
MRP:$227.15 SAVE 20%
coming soon $182.61
FORTHCOMING
Edifier 4005046 R1280DBs Bluetooth Desktop/Bookshelf Speakers (pair, brown)
Cat: 794466
 
24W paired desktop/bookshelf Bluetooth 5.0 speakers with built-in amp and multi inputs
Notes: Edifier 4005046 R1280DBs Brown Powered Bluetooth 5.0 Wireless Desktop/Bookshelf Speakers Pair 42 Watts With Built in Amp and MultiInputs

Includes Remote Control and Cables

Classic Design

Bluetooth 5.0 - Experience true freedom from wired connections with this Bluetooth speaker and enjoy the best audio. You can connect it to devices wirelessly using Bluetooth 5.0, suitable for iOS, Android, Mac, or Windows devices.

Soundfield Spacializer - Built-in Soundfield Spatializer simulates a larger soundstage with the touch of a button. This unique chipset creates wide-filed sound by optimizing each channel, sending out opposite signals to eliminate mutual interference and improve separation.

Removable Mesh Grille - The protective grill can effectively protect your speakers from dirt and other particles and can be easily removed for careful cleaning of speaker face.

Sub-out & OPT/COAX Inputs - When connected the sub-out automatically detects the subwoofer and activates the digital crossover. Optical and coaxial inputs make sure you will always enjoy music with lossless sound quality. Dual RCA inputs allow you to connect to two devices at the same time. Connect to your devices such as phone, PC, laptop, tablet or gaming console with included Fiber Optical input cable, RCA to RCA audio cable, and 3.5 mm-RCA audio cable, eliminates the need to switch cables.

Classic Wood Finish - These impressive speakers are made from MDF wood, designed to effectively prevent resonance. You will love how perfect it fits into your living room, study room, or bedroom.

Precise Control - The adjustable knobs on the side panel of the speaker allow you to adjust the bass, treble, and volume more accurately, press the volume dial to toggle input sources.

Wireless Remote - Adjust volume, mute/unmute, switch OPT/COAX mode, switch line-in, Bluetooth mode and switch sound field extension with the wireless remote, no longer need to heft yourself off of the couch every time you want to make some adjustments.

TOTAL POWER OUTPUT: R/L: 21W+21W RMS

BLUETOOTH VERSION: Qualcomm 3003 V5.0

FREQUENCY RESPONSE: 51Hz-20KHz

INPUT: Bluetooth, LINE IN 1, LINE IN 2, Optical, Coaxial,

DRIVER UNIT: F13mm tweeter unit + 4-inch mid-woofer

SIGNAL-TO-NOISE RATIO: =85dBA

INPUT SENSITIVITY: R/L:350i50mFFS , Bluetooth R/L:700i50mFFS, LINE IN1 R/L:500i50mV, LINE IN2 R/L:600i50mV, Optical /Coaxial,

Includes: RCA to RCA cable, RCA to 3.5mm cable, Speaker Connecting cable, Remote Control, User Manual
Read more
coming soon $145.86
FORTHCOMING
Michigan Synth Works MicroTemps Utile Module (black faceplate)
Michigan Synth Works MicroTemps Utile Module (black faceplate) (clock generator/digital/sequencer synth module)
Cat: 802195 Rel: 18 Jan 21
 
Clock generator module
Notes: 6 x clock generator

Hardware basics, in brief:

teensy 3.1/3.2 @ 120MHz, w/ 128x64 OLED
trigger-to-output latency < 100us.
2 clock inputs (> 100k input impedance; threshold ~ 2.5V)
4 CV inputs (100k input impedance, -/+ 5V, assignable to (almost) any parameter)
6 clock outputs (5 digital, 1 DAC (12 bit): 10V (GPIO), -/+ 6V (DAC))
two encoders w/ switches; 2 tactile buttons.
14HP, ~ 25 mm Depth

Firmware:

7 modes, selectable per channel:
trigger sequencer/sequence editor
clock division/multiplication
LFSR
random w/ threshold
euclidian
logic (AND, OR, XOR, NAND, NOR, XNOR)
burst
DAC (channel #4 only): random, binary, "Turing", logistic, sequencer/arpeggiator
Read more
MRP:$207.11 SAVE 19%
coming soon $168.13
FORTHCOMING
Michigan Synth Works Threshold Module (black faceplate)
Michigan Synth Works Threshold Module (black faceplate) (oscillator/quad/synth voice module)
Cat: 802202 Rel: 18 Jan 21
 
Audio generator module with MIDI fuctionality
Notes: 10HP Edges Clone with integrated midi interface and PSImidi which allows any TRS midi cable to be used.

MIDI Functionality:

MIDI Learn: Press this button and send a midi note. The device will use that channel as the base channel

MIDI Mode: This button cycles between two operational modes.

1. 4 single voices trigger on 4 midi channels starting on the base MIDI channel (i.e. base channel is channel 2 so the voices are mapped over channels 2, 3, 4, 5)

2. Simple Poly mode where each voice plays on a different note on the same midi channel

Note about MIDI and Gating: The gate is normalled OPEN by the Gate 1 input. This is by design but will also force the gate open when the device is triggered by midi. Placing a dummy jack will break the open normal the gate will trigger via MIDI normally

Read more
MRP:$207.11 SAVE 19%
coming soon $168.13
FORTHCOMING
Michigan Synth Works uTides Version 2 Module (black faceplate)
Michigan Synth Works uTides Version 2 Module (black faceplate) (clock generator/digital/envelope generator/frequency divider/function generator/LFO/oscillator synth module)
Cat: 802220 Rel: 18 Jan 21
 
Tidal modulator
Notes: 8HP Tides version 2

Fully calibrated.
Read more
MRP:$207.11 SAVE 19%
coming soon $168.13
FORTHCOMING
Michigan Synth Works MicroTest 12HP Module Tester (black faceplate)
Cat: 802226 Rel: 18 Jan 21
 
Eurorack module tester
Notes: Introducing MicroTest, a eurorack adaptation of the MI module Tester.

Read more
MRP:$245.86 SAVE 32%
coming soon $168.13
FORTHCOMING
AniModule SOB v1 Module
AniModule SOB v1 Module (state variable filter & waveshaper synth module)
Cat: 794397 Rel: 31 Dec 20
 
State variable filter module
Notes:  A State Variable Filter with an adjustable WaveFolder on the input.

Self-Oscillating Filter Tracks 1V/Oct

Vactrol Input allows you to control CutOff via gates/triggers without using up an EG

Pot to mix "Clean" and "Folded" signal levels

Filter and/or Fold Audio Or Control Voltages

2 Input Signal mixer

1 Input Control Voltage Mixer

1 Input to Vactrol for CV Modulation

1V/Oct In

current Draw: +12V = 31mA -12V = 34mA
Read more
MRP:$235.17 SAVE 17%
coming soon $195.97
FORTHCOMING
Michigan Synth Works Typhoon Module (black faceplate)
Michigan Synth Works Typhoon Module (black faceplate) (delay/dual & stereo/effect/pitch shifter/reverb/sampling synth module)
Cat: 802262 Rel: 18 Jan 21
 
Audio processor module
Notes: 16HP Deluxe Clouds Clone with individual controls for each Parameter, VCAs for the left and right channel, additional storage so ALL extra functions are available at once.

Anodized natural aluminium or black aluminum panel.

16HP

25mm Deep

140/35 mA +12/-12V
Read more
MRP:$316.68 SAVE 31%
coming soon $217.12
FORTHCOMING
AniModule TrAniModule Module
AniModule TrAniModule Module (distortion / mixer / utility synth module)
Cat: 794385 Rel: 31 Dec 20
 
Transistor amplifier module
Notes: Behold the TrAniModule- A 1 Watt, Class A Transistor Amplifier in an 8HP, 29mm deep Package.

With a Line Input to jack your iPod or your Walkman up to synth levels.

You want to process your Line Level signal before you send it roaring out the belly of this little beast?

The Line out is normalled to the Mixer, so just plug in and it'll rip your signal away from the maws of this monster.

If you're looking for high fidelity, you better just slink back in to your studio with your Grandaddy's precious pretty monitors...

If you want portability and a warm sound that will drive when you crank it all the way, without knocking your granny off her chamber pot, We got'em both! AniModule has been working hard to help you achieve your Brown Note!

The Mix out is just a nice clean, buffered mix of your 2 Attenuatable Inputs and the Line Input.

The Speaker Out is normalled to the speaker in case you want to drive a bigger cab, or plug your pretty little headphones in, or capture the tone after the amplifier. If you plug in, the speaker cuts out, but the master will still control the volume- proving to be very handy for live performance.

...and really, if you want a nice clean sound, just dial back the levels a little bit!
Read more
MRP:$176.38 SAVE 17%
coming soon $146.97
FORTHCOMING
AniModule ShNoiZe Module
AniModule ShNoiZe Module (noise / random / sample & hold synth module)
Cat: 794389 Rel: 31 Dec 20
 
Sample & hold module
Notes: This is your classic Sample and Hold.

Signal goes in - trip the threshold on the Pulse In - and the out will "hold" the voltage at the point when you triggered it.

There is a separate White Noise circuit. It is normalled to the S+H Input for all your random needs. There is also a Noise out so you can access it independently as well.

There is a slew knob so you can smooth and lag your output to taste

Current Draw: +12V = 23mA, -12V = -12mA

4HP, 29mm Deep
Read more
MRP:$132.28 SAVE 17%
coming soon $110.22
FORTHCOMING
Sensel Dvorak Tactile Keyboard Overlay For Morph MIDI Controller
Cat: 785472
 
Overlay
Notes: Turn the Morph into a wireless keyboard with one of our 3 keyboard overlays. Boost your mobile productivity with tactile key action, function keys, media controls, and customizable shortcuts. Use the SenselApp to adjust for Windows and Mac layouts, so your muscle memory stays intact!

Features:
Soft and quiet, with mechanical feedback - feels fantastic to type on
Wireless Bluetooth connectivity with PC, Mac, iOS (iPhones, iPads) and Android
Hotkeys for PC/Mac
Trackpad below space bar

Specs:
Weight: 0.4 lbs | 182 g
Dimensions: 9.5 x 5.5 x 0.3 in | 24 x 14 x 0.8 cm

*This overlay is designed to be used with the Sensel Morph. So if you don't already own a Morph, pick up the Morph with QWERTY, Morph with AZERTY, or Morph with DVORAK.
Read more
MRP:$45.43 SAVE 17%
coming soon $37.85
FORTHCOMING
Michigan Synth Works uTides Version 2 Module (with LED Pots) (black faceplate)
Michigan Synth Works uTides Version 2 Module (with LED Pots) (black faceplate) (clock generator/digital/envelope generator/frequency divider/function generator/LFO/oscillator synth module)
Cat: 802222 Rel: 18 Jan 21
MRP:$219.14 SAVE 19%
coming soon $178.16
FORTHCOMING
Michigan Synth Works Micro Streams Module (black faceplate)
Cat: 802223 Rel: 18 Jan 21
 
Micro module
Notes: 8HP micro module based on Opensource Streams. Stock Streams firmware
Read more
MRP:$227.15 SAVE 20%
coming soon $182.61
FORTHCOMING
Edifier 4005015 SS02C Speaker Stands For S2000MKIII (pair, brown/black)
Cat: 794403
 
Paired 26.5" wooden speaker stands for S2000MKII
Notes: Edifier 4005015 SS02C S2000MKIII Speaker Stands Pair 26.5 Inches WoodGrain (Brown/Black).

Premium Speaker Stands for S2000MKIII-Pair.

All-wood speaker stand. Wood Grain Design - The same design style as is used in S2000MKIII speaker, the stands complement the gorgeous cabinet of the S2000MKIII anywhere in your home.

Shock Absorbing Mat - The thick shock-absorbing mat creates a non-slip surface and protects the floor from damage.

Golden Height for Listening - Offers elevated sound to your ear level so that you can enjoy a much more shocking sound quality.

Stable and Firm Structure - Adopting high-quality and sturdy structure, so you can safely place the S2000MKIII speaker on the stand without worrying.

Hollowed Design - Ready to fill with sand to increase stability and eliminate resonance.

Easy Assembly - Assemble in minutes by simply screwing on the top and bottom of the stand.

Accurate pre-drilling - Inlcudes key wrench for assembly.
Read more
coming soon $161.45
FORTHCOMING
Michigan Synth Works XVI Desktop USB 16 Channel Fader Bank Surface Controller (black faceplate)
Notes: XVI Desktop is a 16 channel desktop control surface. Please note: This is NOT a 16n and is NOT compatible with any 16n related software.
Read more
MRP:$454.31 SAVE 31%
coming soon $312.88
FORTHCOMING
AniModule TikTok Module
AniModule TikTok Module (clock modulator synth module)
Cat: 793800 Rel: 31 Dec 20
 
Clock divider & multiplier module
Notes: The TikTok is a 4HP Clock Divider/Multiplier.
It has Divisions and Multiplications of:
*//2
*//3
*//4
*//5
*//6

There is a Clk Input and a Reset Input.
Both are buffered with an opamp based comparator circuit.
They are looking for approximately +1.1V on a rising edge.
This means that you are not constrained to gate (pulse) signals to trigger them.

The Reset input resets your divisions clock counter to 1

There is a switch to select Mathematical or Musical divisions.

The Multiplication Outputs 25MS Trigger pulses.
The Division Outputs are on as long as your Clock source.

Avg Current draw:
40 mA
-9 mA
Peak Current Draw:
80 mA
-17 mA

Width = 4HP
Depth = 38mm
Read more
MRP:$196.42 SAVE 17%
coming soon $163.67
FORTHCOMING
AniModule Line_Amp Module
AniModule Line_Amp Module (multiple / preamp / utility / dual stereo / external synth module)
Cat: 793793 Rel: 31 Dec 20
 
Buffered multiple module
Notes: Check out AniModule's Line to Synth Level Converter.

2 Channels of 1 in <--> 2 Out.

Each channel is designed to multiply your input by *3 to boost your Line Gear / Tablet / Phone so you can integrate audio OR Control Voltages from your auxiliary systems.

Each channel's input is designed with Line Level gear's input impedance in mind.

Perfectly compatible with Synth Output Impedances, but the standard Synth Input Impedance is higher than Line level equipment is expecting.

Don't need to amplify your XPhone right this minute? Never fear! Just Hit the Switch!

This module won't sit unused in your cabinet breeding resentment and dust bunnies.

Hit the switch and that channel becomes a normal 2 HP Unity Gain Buffered Mult.

Only need one channel of each? It's YOUR Choice!
Read more
MRP:$110.90 SAVE 17%
coming soon $92.41
FORTHCOMING
Michigan Synth Works USB2MIDI 5 Port TRS MIDI Output Module (black faceplate)
Cat: 802353 Rel: 18 Jan 21
 
TRS MIDI output module
Notes: This device provides 5 TRS MIDI out ports in a slim 2HP package.

5 MIDI OUT (only) ports, 16 channels per port

25mm depth

3 Aux headers for internal MIDI connections (ports 1-3)

TYPE A TRS MIDI Standard

Solid Ploytec GM5 technology

Class compliant USB
Read more
MRP:$105.56 SAVE 22%
coming soon $82.39
FORTHCOMING
Michigan Synth Works 2HP2CV USB to CV Adapter Module (black faceplate)
Cat: 802356 Rel: 18 Jan 21
 
USB to CV adapter module
Notes: 2HP adaptation of Mutable Instruments CVpal

Width: 2HP

MINI USB connection

LED indicators for Gate activity

Depth: 17mm

Fully Calibrated
Read more
MRP:$70.82 SAVE 23%
coming soon $54.56
FORTHCOMING
Michigan Synth Works F8R Output Expander Module (black faceplate)
Michigan Synth Works F8R Output Expander Module (black faceplate) (controller/expander/MIDI/multiple synth module)
Cat: 802350 Rel: 18 Jan 21
 
Output expander module
Notes: F8R Output Expander adds 3 TRS midi outputs (multiples of the MIDI out of the 8m), 3 fully buffered I2C TRS headers, and an optional 1x3 TRS Through.

I2C:

The 3 I2C outputs are fully buffered and allow for very long connections to other devices. They are all multiples of the I2C output of the 8m.

MIDI:

MIDI Out: Single Output from 8m. If nothing is plugged into this jack, the MIDI data is forwarded to the 1x3 MIDI through.

MIDI IN: MIDI input to the 1x3 MIDI through, connecting an input will disconnect the MIDI out from the 8m. This input can accept TRS MIDI A or B cables

Multiple MIDI Outs: Fully buffered midi outs

2HP Width, 22mm Depth, TRS MIDI TYPE A outputs

Current Draw: N/A, Connects to 8m
Read more
MRP:$70.82 SAVE 23%
coming soon $54.56
FORTHCOMING
Michigan Synth Works BLN Audio Level Converter Module (black faceplate)
Cat: 802359 Rel: 18 Jan 21
 
Audio level converter module
Notes: BLN is a 4 channel audio level converter designed to interface line or "pro" audio levels to modular audio levels. It features 2 independent converters with 2 channels each.

Converter 1: Line level/Balanced to Modular Level

The inputs for the top converter are for converting -10dB or +4dB signal levels (balanced or unbalanced) to +/-5V modular levels. Each channel can be set individually for +4 or -10 using channel 1 and 2 of the DIP switched

Converter 2: Modular level to Balanced Lined

The inputs for the bottom to converters accept a +/-5V modular audio level and converts them to a BALANCED +4 dB or -10 dB audio level. Each channel can be set individually for +4 or -10 using channel 3 and 4 of the DIP switched.

For balanced signals, simply use a 3.5mm TRS to 1/4" TRS Cable or 3.5mm TRS to 3.5mm TRS cable with a 1/4" TRS adapter. Unbalanced signals should use a 3.5mm TS cable

2HP Width, 32mm Depth

Current Draw: 12/14 mA +12/-12

Please note: This devices uses a polarized power cable, please make sure the red stripe corresponds to the white stripe on the board
Read more
MRP:$105.56 SAVE 22%
coming soon $82.39
FORTHCOMING
Michigan Synth Works XVI 16-Channel Fader Bank Module (black faceplate)
Cat: 802361 Rel: 18 Jan 21
 
16-channel fader bank module
Notes: XVI is a 16 channel, 44hp control surface for Eurorack
Read more
MRP:$358.10 SAVE 31%
coming soon $246.07
FORTHCOMING
Michigan Synth Works F8R 8 Channel Fader Bank Module (black faceplate)
Cat: 802345 Rel: 18 Jan 21
 
8-channel fader bank module
Notes: F8R is a 8 channel, 16hp control surface for Eurorack

16HP Width, 20mm Depth
Current Draw: +12V 50 mA, -12V 40 mA

Basic Usage instructions:

Front:

Voltage Select switches: Independent for each channel. Does NOT affect MIDI/I2C data

Slider LED color: To change the LED color, simply remove the cap and rotate the square LED 180s. Do NOT force the LED back in, it should slide in easily, may require wiggling.

Rear:

Power Header: Standard 10pin power cable, there is NO polarity for this connection. It can be connected either way

MIDI Out Header: This is a 4 pin header but only 3 or 2 connections need to be used. To connect to a DIN cable, either GND, 5 (to pin 5, current sink/aka -), and 4 (to pin 4, current source/aka +) should be used. For internal module to module connections, only pin 4 and 5 should be used. The ground pin is only for the shield in a midi cable, it is never connected on a midi input and isnt necessary for the short module to module lengths

I2C Header: 3 pin header to connect to other I2C devices in your rack, this is an unbuffered connection so cable lengths should be as short as possible (20cm/6" recommended). There are 4.7k pull up resistors on this connection

Module Orientation jumpers: There are 3 of these jumpers which determine how the module operates depending on if the jacks are on top or bottom. They will come installed in the position matching your panel but can be changed should you want to flip it. "INV" is Jacks on Top, the white position is jacks on bottom. Changing these jumpers will change the numbering of the faders from left to right (1->8) in both MIDI and I2C and will invert the voltage response (i.e. 10->0V from top to bottom). The jumper is shown in the "jacks on top" position in the pic below. ALL THREE JUMPERS MUST BE IN THE SAME POSITION for the module to operate correctly.

Module Config DIP switch: This allows you to switch between I2C Follower and I2C Leader modes easily. Simply move the switch to the "lead" position and restart the module (you can press the blue reset button once). The other 3 positions are for future expansion and not currently implemented.

Connector for Expander: This connects the F8R to the I/O expander. The cable is attached to the expander. Note the keyway at the top of the part, the connecter will ONLY connect one way
Read more
MRP:$280.60 SAVE 31%
coming soon $192.63
FORTHCOMING
AniModule STD Syncopated Timing Disruptor Module
AniModule STD Syncopated Timing Disruptor Module (clock generator / clock modulator / logic synth module)
Cat: 793790 Rel: 31 Dec 20
 
Syncopated timing disruptor module
Notes: The STD, or Syncopated Timing Disrupter is a dual tap tempo clock with CV control for clock division and multiplication. If one wishes to synchronize the STD with other clocked gear, there is also a Gate input. The CV inputs can shift the clock to being upto 8x faster or /8 to be slower. This function is voltage controllable to turn the STD into a nonstop groove machine. Included in this are three logic functions that output gates depending on how the two channels are interacting. There is OR, ADD, and XOR logic functions.

2 Independent Tap Tempo Clock Channels
Prefer to use a Gate? No Prob! Just Patch in to the Gate Input.

Use the Div/Mult/Offset Pot to Multiply or Divide your Clock Time up to *8 - /8

Or patch In to the CV Input to Modulate the Mathematical Madness!
When CV is being input the Div/Mult/Offset Pot behaves as an Offset.

CV Input wants 0V to +5V, but whatever you got, Between the Offset, and the Front Panel CV Attenuators, it's easy to dial in your desired range of "On the Fly" Mathematical Clock Time Modulations.

Want to sync the 2nd channel to the first?
Latch the Ch1 - Ch2 switch and the Output of Channel 1 is normalled to the jack Switch of Channel 2.
You can still control the Multiplications / Divisions of each channel Independently!

If that wasn't enough to get you poppin' penicillin prophylactically there's more!

The bottom row of jacks constantly output OR, AND, and XOR Logic Combinations of the 2 channels combined!

Want to use something funky (like a Sine Wave / Envelope / Random Voltage Generator) to set the rhythm? The Input is a Buffered Comparator set to trigger at any signal above +1.2V

Perfectly happy up in to the Mid- Audio range.

6HP
+44mA
-16mA
Read more
MRP:$220.47 SAVE 17%
coming soon $183.71
Items 201 to 250 of 269 on page 5 of 6
«  1  2  3  4  5  6  »

Filter

Coming Soon: Studio Equipment
Close