安全购物

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

安全购物

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Coming Soon: Studio Equipment

首页  Coming Soon  

Studio Equipment

Options
Items 1 to 50 of 263 on page 1 of 6
1  2  3  4  5  6  »
FORTHCOMING
1010 Music Bluebox Compact Digital Mixer & Recorder
Cat: 793767 Rel: 31 Dec 20
 
Compact digital mixer & recorder
Notes: Bluebox is the portable digital audio mixer that lets you get the most out of your electronic music gear. Connect your eurorack, sampler, drum machine and synthesizer outputs to 6 stereo, 3.5 mm TRS inputs and map them to 12 mono tracks or 6 stereo tracks, all with independent control for recording and playback. It's that keyboard mixer with live performance features that you always hoped someone would make.

Connect the output of your electronic music gear to bluebox, and then route each track independently to the three outputs and effects sends. Each track offers control of volume, gain, 4 band parametric EQ, pan, mute and solo functions. Apply high-quality global reverb and delay effects along with 4 band EQ per track to add new depth to your sound with total control to quickly tweak incoming audio or track playback as needed.

With Bluebox you can record independent tracks or the Main mix using a standard microSD card. Capture your jam session for later review, or record the ultimate mix of the tracks for your song.

Bluebox's compact 5.5h x 5h x 2h case lets you tuck it into a crowded tabletop studio or throw it in your pack for the next gig.

Interact with the dynamic visual interface on the 3.5h touchscreen along with physical knobs, navigation buttons and transport buttons to quickly access the most important functions. MIDI input and output allow you to sync the clock with external gear for synchronized effects and metronome.

Add Some Colour to Your Mix:
Mix 12 mono/6 stereo tracks of live or prerecorded sound.
Independently route each track to any combination of three stereo TRS outputs:

Stereo Output 1 - Main mix
Stereo Output 2 - Assignable, with dedicated sub-mixer (pre or post fader)
Stereo Output 3 - Headphone output, with dedicated sub-mixer (pre or post fader)
Control one parameter for multiple tracks at once in Mixer mode.
Focus on one track at a time in Track mode.
Adjust the level or mute state of each output independently.
Use touch gestures or knobs to tweak your sound with four band EQ per track with support for Low Cut/Low Shelf, Parametric, and High Shelf/High Cut settings for each band.
Apply high-quality Reverb and Delay effects with independent effects sends for each track.
Override the headphone output with the Main mix on demand.
Maximize the loudness and unify your mix with the built-in global compressor
Sync to external clocks through the MIDI Input and Output.
Record hours of music as 48k, 24 bit WAVs directly to the microSD card as multi-track or as the main stereo mix.
Playback a previously recorded track while recording new ones.
Load firmware updates through the microSD card.
Mix electronic music gear such as the 1010music blackbox, eurorack modules, drum machines, samplers and synthesizers.
Save and recall Project settings including all parameters for tracks, outputs, EQ and effects.
Copyright 1010music LLC 2020 --- CONFIDENTIAL ---
Copyright 1010music LLC 2020 --- CONFIDENTIAL UNTIL 10/10/2020 ---
Fit it into a small spot on your desk and then tuck it in your pack for the next gig.

What is Included:
Bluebox digital recording mixer
A microSD card with bluebox firmware and pre-loaded project files
A USB power cable and AC adapter with 3 international adapters
2 MIDI Adapters . Male 3.5 mm TRS to Female 5 pin DIN, MIDI Class B standard
A Quick Start guide to show you the basics (full user manual available online)

Specs:
6 stereo 3.5 mm TRS inputs
12 mono tracks, 6 stereo tracks or something in between
3 independently controlled stereo 3.5 mm TRS outputs
3.5h touch screen, 4 knobs, 8 navigation buttons and 3 transport buttons
3 effects: reverb, delay and compressor
Records and plays back 48k, 24-bit audio WAV files
4 band EQ per track
MIDI In and Out for beat syncing effects
Dimensions: 5.5 x 5 x 2 (14 cm x 13 cm x 5 cm), 1 lb (450 grams)
Durable aluminum case
Read more
MRP:$618.39 SAVE 17%
coming soon $515.31
FORTHCOMING
2hp Drum Machine Powerful Rhythm Section Lunchbox System
2hp
Cat: 797220 Rel: 31 Jan 21
 
Complete modular percussion system
Notes: The essential sounds for a full modular percussion section, kick, snare, and hat, with onboard mixer to help your drum machine sit in the pocket.
Read more
MRP:$787.04 SAVE 23%
coming soon $602.31
FORTHCOMING
2hp Effects Rack High Fidelity Effects Chain Lunchbox System
2hp
Cat: 797223 Rel: 31 Jan 21
 
High-fidelity effects chain
Notes: The ultimate effects send to bring your sounds to life. With DSP onboard each effect, high fidelity processing can turn your dry sound into an ethereal sonic landscape using our most popular effects modules.
Read more
MRP:$859.32 SAVE 24%
coming soon $656.98
FORTHCOMING
2hp Loop Module (black faceplate)
2hp
Cat: 766647 Rel: 31 Dec 20
 
loop module
Notes: Sound on sound looper with 5 minute audio buffer.

Audio specs: 48kHz, 24 bit.
Read more
MRP:$184.71 SAVE 17%
coming soon $153.93
FORTHCOMING
2hp Loop Module (silver faceplate)
2hp
Cat: 766646 Rel: 31 Dec 20
 
sound looper module
Notes: Sound on sound looper with 5 minute audio buffer.

Audio specs: 48kHz, 24 bit.
Read more
MRP:$184.71 SAVE 17%
coming soon $153.93
FORTHCOMING
2hp Lunchbox 42HP Portable Eurorack Modular Powered Case
2hp
Cat: 793124 Rel: 31 Dec 20
 
Portable modular case
Notes: This 42HP case comes fully powered and ready to go with a latchable lid. Whether you're in the studio, on a plane, or performing at your next modular picnic, Eurorack has never been so portable.

2HP are also selling four powerful systems packed in the new Lunchbox case:

Picnic Basket, Synth Voice, Drum Machine, and Effects Box.

These systems are sure to become the bread and butter of your creative process.

Available as a standalone case (powered/unpowered), full of modules, and as a lunchbox for your lunch!
Read more
MRP:$429.66 SAVE 24%
coming soon $327.92
FORTHCOMING
2hp Picnic Basket Versatile Modular Lunchbox System
2hp Picnic Basket Versatile Modular Lunchbox System (complete modular synthesiser system)
2hp
Cat: 797226 Rel: 31 Jan 21
 
Modular synthesiser system
Notes: The Flagship Lunchbox.
Read more
MRP:$1,436.21 SAVE 23%
coming soon $1,106.48
FORTHCOMING
2hp Pitch Module (black faceplate)
2hp
Cat: 766655 Rel: 31 Dec 20
 
pitch shifter module
Notes: Time domain pitch shifter with flutter control.
Read more
MRP:$147.24 SAVE 17%
coming soon $122.70
FORTHCOMING
2hp Pitch Module (silver faceplate)
2hp
Cat: 766651 Rel: 31 Dec 20
 
pitch module
Notes: Time domain pitch shifter with flutter control.
Read more
MRP:$147.24 SAVE 17%
coming soon $122.70
FORTHCOMING
2hp Synth Voice Classic Analogue Voice Lunchbox System
2hp
Cat: 797212 Rel: 31 Jan 21
 
Complete synthesizer voice system
Notes: Complete synthesizer voice with analog VCO and VCA, multimode filter (lowpass, highpass, and bandpass), and ADSR envelope for sound shaping.
Read more
MRP:$716.10 SAVE 24%
coming soon $547.66
FORTHCOMING
ADDAC System ADDAC405 VC Relabi Generator Module
Cat: 797099 Rel: 31 Jan 21
 
clock generator / clock modulator / LFO / quad / comparator synth module
Notes: In 2009 John Berndt coined and defined the term Relabi in his essay "Relabi": Patterns of Self-Erasing Pulse, these are his own words: "Relabi, Def.: The experience of a palpably coordinated plurality of events that appears to be cyclical but simultaneously suspends identification of a uniform pattern, preventing a resolved sense of pulse. Relabi therefore seems equally pulsed and unpulsed at the same time. It is an experiential gestalt, a quality of experience, greater than the sum of its parts (it forms a sustained unity in experience, albeit of a new kind)."

He also makes the question: "Why would anyone want this Relabi experience? I maintain that much of what is exciting in musical forms involves an interplay between the setting up and denying of pulse expectations."

Inspired by this idea, ADDAC System developed this module that is both a gate/trigger and cv generator that can be freely used to trigger events or act as a complex modulation source. Four Sine LFOs are internally generated, each has controls for gain, frequency and mute(off). These 4 LFOs are then mixed together to generate what Berndt named the "Relabi Wave" this "wave" becomes a complex bipolar CV source. This i5v bipolar "wave" can be monitored on the 2 dedicated leds and is also available at its own Output.

Make sure to check the User's Guide for indepth description, working behaviour and diagrams.

Tech Specs:
10HP
4cm deep
100mA +12V
40mA -12V
Read more
MRP:$357.38 SAVE 19%
coming soon $290.00
FORTHCOMING
ALM Custom 3.5mm Male Mono Eurorack Patch Cables (120cm, blue, pack of 2)
Cat: 801572 Rel: 28 Feb 21
 
Pack of 2 3.5mm patch cables
Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.
Read more
coming soon $6.97
FORTHCOMING
ALM Custom 3.5mm Male Mono Eurorack Patch Cables (120cm, white, pack of 2)
Cat: 801576 Rel: 28 Feb 21
 
Pack of 2 3.5mm white patch cables
Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.
Read more
coming soon $6.97
FORTHCOMING
ALM Custom 3.5mm Male Mono Eurorack Patch Cables (15cm, blue, pack of 5)
Cat: 801479 Rel: 28 Feb 21
 
Pack of 5 3.5mm blue patch cables
Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.
Read more
coming soon $6.97
FORTHCOMING
ALM Custom 3.5mm Male Mono Eurorack Patch Cables (15cm, purple, pack of 5)
Cat: 801484 Rel: 28 Feb 21
 
Pack of 5 3.5mm purple patch cables
Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.
Read more
coming soon $6.97
FORTHCOMING
ALM Custom 3.5mm Male Mono Eurorack Patch Cables (30cm, blue, pack of 5)
Cat: 801508 Rel: 28 Feb 21
 
Pack of 5 3.5mm blue patch cables
Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.
Read more
coming soon $8.65
FORTHCOMING
ALM Custom 3.5mm Male Mono Eurorack Patch Cables (30cm, yellow, pack of 5)
Cat: 801501 Rel: 28 Feb 21
 
Pack of 5 3.5mm yellow patch cables
Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.
Read more
coming soon $8.65
FORTHCOMING
ALM Custom 3.5mm Male Mono Eurorack Patch Cables (60cm, blue, pack of 5)
Cat: 801528 Rel: 28 Feb 21
 
Pack of 5 3.5mm patch cables
Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.
Read more
coming soon $9.21
FORTHCOMING
ALM Custom 3.5mm Male Mono Eurorack Patch Cables (60cm, red, pack of 5)
Cat: 801520 Rel: 28 Feb 21
 
Pack of 5 3.5mm red patch cables
Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.
Read more
coming soon $9.21
FORTHCOMING
ALM Custom 3.5mm Male Mono Eurorack Patch Cables (90cm, blue, pack of 3)
Cat: 801543 Rel: 28 Feb 21
 
Pack of 3 3.5mm blue patch cables
Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.
Read more
coming soon $7.54
FORTHCOMING
ALM Custom 3.5mm Male Mono Eurorack Patch Cables (90cm, red, pack of 3)
Cat: 801536 Rel: 28 Feb 21
 
Pack of 3 3.5mm red patch cables
Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.
Read more
coming soon $7.54
FORTHCOMING
Analogue Systems RS-110N Multimode Filter Module
Cat: 777031 Rel: 31 Jan 21
 
multimode filter module
Notes: The RS-110 is a resonant analog multimode filter with excellent sound, resonance and four simultaneously available filter types. An insert function in the feedback loop allows you to insert other audio processors.

The module has two audio inputs, each with a level control. "unity gain" is reached at position 4, beyond this the signal will be overdriven at the filter input.

The cutoff frequency can be set manually in a range of 30Hz to over 15kHz, with additional CVs even up to 50kHz.

Separate audio outputs for the four filter types are available: 24dB low pass, 24dB high pass, 12dB band pass and 12dB notch.

Resonance goes up to self-oscillation and besides that it offers an unique feature: the socket Res-Out and Res-In act like an insert i.e. they allow you to process the audio signal in the feedback loop by other audio processors like filters, distortions, delays, frequency shifters etc.

You get very wicked results when you connect the notch output with the resonance input. It sounds very metallic and the filter behaviour gets more aggressive. Generally it is fun to cross-connect the separate outputs with the CV and audio inputs and to use the filter in a modular way.

In use:

The RS-110N consists of a two channel audio mixer followed by four, parallel, resonant filters with voltage controlled frequency and a unique "insert" point in the feedback path that generates and controls resonance.

Filter Modes

The RS-110N offers four filter modes. These are 24dB/Oct low-pass , 24dB/Oct high-pass, 12dB/Oct band-pass and 12dB/Oct band reject (often called 'notch') filtering, with the cutoff frequencies (Fc) of the high-pass and low-pass outputs being the centre frequencies of the band-pass and notch outputs. Each of these filter characteristics is described in appendix 2.

There is no switch to select between the modes because all four are available simultaneously from the appropriate output sockets. However, the cut-off and resonance can not be defined individually for each, and the controls act upon each mode equally

You can determine Fc in the range 3Hz to 50kHz using combinations of the frequency control knob and the voltage control inputs.

CV-IN:
If you apply a CV conforming to the 1V/Oct standard, Fc will track the CV in exactly the same way as an RS-90 VCO would if you applied the same CV to its CV-IN 1V/Oct socket. If the CV is supplied from a keyboard then, in common parlance, the filter is tracking the keyboard 100% and, with the resonance at maximum, you can 'play' the filter as if it were a conventional oscillator.

You can also use this facility to make a notch or band-pass filter "track" the notes you are playing, and this can be used to create many special effects.

CV-IN VARY:
You may wish Fc to track incoming CVs differently, so the C V-IN VARY input is provided. This socket and its associated LEVEL control allow you to specify the filter's sensitivity to C Vs within the range 8V/oct to approximately 0.4V/Oct. The former of these makes the filter invariant to incoming CVs, while the latter makes it oversensitive compared to CV-IN.

Resonance

The filters have a common resonance, 'Q', that you can control using the RESONANCE knob. In its fully anticlockwise position, Q is approximately zero, and there is no emphasis of the signal at Fc. As you rotate the knob clockwise Q will increase, whereupon every mode of the RS-110N will accentuate the harmonics that lie close to the cut-off frequency, Fc. Increasing Q further, the filters will exhibit ringing, and will severely colour any signals passed through them. Finally, if you continue to increase the resonance beyond a certain point, the filter will itself begin to oscillate, even in the absence of an input. Each mode will now produce a stable tone at the cutoff frequency determined by the various controls. This oscillation takes the form of (approximately) a sine wave, and it is produced by all four of the conventional audio outputs. The exact nature of the wave varies slightly from mode to mode, and you can use these subtle differences to create tonal variation when using the RS-110N as an oscillator.

Uses for RES OUT and RES IN include the introduction of voltage controlled resonance (achieved by routing the signal via an RS-180 VCA) or the creation of special effects (achieved by modifying the signal using devices such as reverb units).
Read more
MRP:$262.35 SAVE 17%
coming soon $218.62
FORTHCOMING
AniModule AnVilope Module
AniModule AnVilope Module (clock generator / envelope generator / LFO synth module)
Cat: 794381 Rel: 31 Dec 20
 
Envelope generator module
Notes: A Simple, Affordable, 4HP, Analog Envelope Generator.

Attack, Decay, Release... Simple.

- Envelope Out 0V to +7V
- Loop function so you can use it as a Variable Wave-Shape LFO / Timer
- Inverted out that goes from +7V to 0V

Function:
When the gate is High the envelope will rise and cycle through it's phases.
When gate goes low again the envelope will revert to the release phase.

If the Gate is longer than the ADR phases, the decay will play out then go to release and the envelope will end after the release.

Sprinkle them all over your system!

4HP Depth : 28mm
Read more
MRP:$115.11 SAVE 17%
coming soon $95.92
FORTHCOMING
AniModule DD Dual VCA Module
AniModule DD Dual VCA Module (CV modulation / panning / VCA / dual stereo synth module)
Cat: 794391 Rel: 31 Dec 20
 
Dual VCA module
Notes: A Dual VCA for Audio or CV.

Mod In 1 is Buffered, Inverted then Normalled to Mod In 2, to facilitate stereo panning and VC CrossFading without a bunch of support modules.

Don't want it? Just turn the attenuator down or plug a signal of your choosing in to the Mod In 2.

Current Draw: +12V = 25mA, -12V = -22mA

8HP, 28mm Deep
Read more
MRP:$206.13 SAVE 17%
coming soon $171.77
FORTHCOMING
AniModule Gate_Mod Module
AniModule Gate_Mod Module (clock modulator / dual stereo / frequency divider synth module)
Cat: 793797 Rel: 31 Dec 20
 
Gate modifier & trigger delay module
Notes: Got a gate that's gonna make you late? Run it through the Gate_Mod! Got a trigger comin' sooner than you figger'd? Run it through the Gate_Mod!!

Let's face it, couldn't we ALL use a little more length?

This Tiny (yet powerful) Module allows you to manipulate your gate length and delay your event triggers with ease and minimal impact on your HP.

Take an incoming Signal above ~1.1V (OpAmp Comparators on the Inputs make very forgiving Clock Inputs) and shrink it down to 5MS or lengthen it up to 5 Seconds.

That Gate will appear at the Gate Out.

When the Gate is Over a 10MS Trigger will turn on at the Delay Out.

Set the length of the Gate with the Time Potentiometer OR with the CV Input.

The switches allow you to choose between Interrupt OR Dividing Behavior (1 for each channel).

If you have Interrupt selected, when Clock In receives a new Clock Pulse the time will reset, essentially lengthening your Gate Out and Delay Out to the Time you have set + the time that has already elapsed.

So Gate will never go Low and Delay will never go High if you have a Time set longer than the interval between Clock Pulses (Useful if you have staggered, irregular or random Clocks).

When Dividing is selected Clock In will Ignore new Clock Pulses until it has finished the current cycle it's running.

The Delay 1 Out is Normalled via the Jack switch of the Clock 2 Input for all kinds of Timing madness!

Width = 4 HP
Depth = 37mm
Current Draw:
+12V = 35mA
-12V = -18mA

*The Gate_Mod firmware has been updated as of Mid August 2015. There was a bug in the Delay Out section that prevented it from resting at full 0V. All Gate-Mods shipped After the Firmware was updated include the new revision.
Read more
MRP:$196.76 SAVE 17%
coming soon $163.95
FORTHCOMING
AniModule Lil' Monster VCO Module
AniModule Lil' Monster VCO Module (oscillator synth module)
Cat: 794393 Rel: 31 Dec 20
 
VCO module
Notes: At 8HP and 28mm deep this is A Frightening little Oscillator with Monstrous PWM, Sick, Sick Sync, and Terrifying FM capabilities!!

Great 1V/Oct tracking

Range from below to above the audible

All Waveforms respond to your Sync Input signal

Current Draw: +12V = 21mA, -12V = -21mA 8HP, 29mm Deep
Read more
MRP:$250.30 SAVE 17%
coming soon $208.58
FORTHCOMING
AniModule Line_Amp Module
AniModule Line_Amp Module (multiple / preamp / utility / dual stereo / external synth module)
Cat: 793793 Rel: 31 Dec 20
 
Buffered multiple module
Notes: Check out AniModule's Line to Synth Level Converter.

2 Channels of 1 in <--> 2 Out.

Each channel is designed to multiply your input by *3 to boost your Line Gear / Tablet / Phone so you can integrate audio OR Control Voltages from your auxiliary systems.

Each channel's input is designed with Line Level gear's input impedance in mind.

Perfectly compatible with Synth Output Impedances, but the standard Synth Input Impedance is higher than Line level equipment is expecting.

Don't need to amplify your XPhone right this minute? Never fear! Just Hit the Switch!

This module won't sit unused in your cabinet breeding resentment and dust bunnies.

Hit the switch and that channel becomes a normal 2 HP Unity Gain Buffered Mult.

Only need one channel of each? It's YOUR Choice!
Read more
MRP:$111.10 SAVE 17%
coming soon $92.57
FORTHCOMING
AniModule LogicOgic Module
AniModule LogicOgic Module (clock modulater / frequency divider / logic synth module)
Cat: 794401 Rel: 31 Dec 20
 
Logic module
Notes: This is a handy module. It's nice to have a few ORs and ANDs around when you're fiddling around with your clocks and percussives.

The Output from FlipFlop1 Q is normalled to the FlipFlop2 Input via the jack switch.

The NOT Q outs from the FlipFlops are fun to stagger your clock pulses or use as a Sub-Oscillator. The Inverter/Buffer can be sent to a Gate-Trigger converter and back to the OR to double your clock.

2 - FlipFlops (Q and NOT Q outs for each)

2 - OR Gates

2 - AND Gates

1 - Buffer/Inverter

All the outs are Buffered.

55 mA +12V
38 mm deep
O 4.00 (2 Votes) Average Rating
Read more
MRP:$263.68 SAVE 17%
coming soon $219.73
FORTHCOMING
AniModule M1xXOR Module
AniModule M1xXOR Module (mixer / sequencer / switch synth module)
Cat: 793792 Rel: 31 Dec 20
 
CV sequencer module
Notes: The Animodule M1xXOR is the Jon Snow of Animodule's product lineup. Described as a "bastard progeny" and "unholy union" by its creators, the module is an amalgamation of the V9a, VCSS, XXX_OR, and MixMan modules. Each of the module's channels, as well as the mixer, can be used independently of the sequencer, enabling a variety of self-contained and inter-module uses. When used independently for self-contained functionality, the module can function as a 4-channel DC-coupled mixer or as 4 individual channels of gated attenuation.

How It Works:
-Signal goes in to Channel Input (it's DC connected so you can use Audio OR CV).
-Signal is attenuated via Channel Attenuator.
-Signal is allowed to pass through to Individual Channel Output AND Mixer Output IF Gate Input is High OR Switch is depressed.

Sequencer:
-Clock Pulse High in to Clock Input Moves Sequence forward 1 Step.
-The Channel that the step is On will be open
-CV can be used to control the Sequencer via the CV Input.
-There is a resolution of 5 steps (4 channels and a 0 step allowing for all channels to be cleared from the Sequencer).
-There is an attenuator and offset to help properly scale and position your CV Input.
-CV Input is expecting 0V to +5V, but with the Attenuator and Offset will easily work with -/+5V.
-Clock and CV maybe used in tandem resulting in some mind melting rhythms!
-In that case the Clock will step forward 1 step from it's current position (unless it's on step 4 in which case it will roll over to step 1)
-The Clock used in conjunction with the CV will bitshift the sequence to the left, incrementing the static position of the step counter by 1 (wrapping around to step 1 after step 4).
-Fer' Instance, 2 Clock counts and CV is on 0. Step will be on Channel 2
-Gate High in to Reset will reset Clock counter to step 1 OR if Clock Input is being used in conjunction with the CV Input the reset will clear the Clock Counter and return the step to where the CV indicates it should be without any BitShifting

*Gate Input / Switches in conjunction with Sequencer:
-The Sequencer and the Gate Input / Switches combine in a XOR gate. If one is High and the other is not, that channel will be open. If BOTH are High, that channel will be closed.

Despite the lengthy description, the M1xXOR is very intuitive (and unbelievably Fun!) to use.
Each Channel (and the Mixer) May be used independently of the Sequencer.
So if you're not in the mood for Rhythmic Insanity You still have a gateable 4 Channel DC-Coupled Mixer AND/OR 4 independent and gateable channels of Attenuation.
You will NEVER just have it filling space in your cabinet.
You will find a use for it in EVERY patch!

All this in 8HP with a depth of 33mm (from rear of Front Panel).
Read more
MRP:$244.95 SAVE 17%
coming soon $204.11
FORTHCOMING
AniModule MIDI_Gate Module
AniModule MIDI_Gate Module (MIDI synth module)
Cat: 793791 Rel: 31 Dec 20
 
MIDI gate interface module
Notes: The AniModule MIDI_Gate is an easy way to integrate your MIDI-synced workflow with your Modular Synth.

10 Gate Outs that correspond to MIDI notes C1 - A1 (36 - 46).

MIDI NoteOn >> Gate is High

MIDI NoteOff >> Gate is Low

Programmed to receive on MIDI Channel 10

All this in 4HP!!!

Use it to send Multiple Clocks synced to your main Clock.

Use it to trigger events to effect samples piped in via a Line_Amp or TrAniModule in realtime in the analog domain for Live Performance or Resample.

Use it to interface in realtime with your Keyboard, Pad Based Controller, or DAW.

Width = 4HP

Depth = 33mm
Read more
MRP:$208.81 SAVE 17%
coming soon $173.99
FORTHCOMING
AniModule MixMan Module
AniModule MixMan Module (attenuater / mixer/ multiple / polariser / utility synth module)
Cat: 794394 Rel: 31 Dec 20
 
Mixer multiple & CV manipulator module
Notes: This quintessential module, while seeming fairly utilitarian, is practically Indispensable.

At only 8HP wide and 30mm deep
You can Mix, Mult, Invert and Offset your Audio and CV.

For starters there is a 3 Channel Mixer with x3 Buffered Outs.
Then there is a dedicated Analog Inverter.
Last but not least there is an Offset Manipulator.

The Offset Manipulator is designed to take a signal and combine it with an offset.
It will work fine without a signal coming in to it though. Just take the signal from the Offset Manipulator out and dial in your desired voltage.

The Offset Manipulator Out is Normalled to the 3rd Mix In Jack Switch. If you don't want your Mixer Signals Offset, Connect a plug to the 3rd Mix In Jack First, or just dial down the 3rd attenuator to 0.

The Mixer Out is Normalled to the Inverter In Jack Switch. That way you can have an inverted version of your MixOut at the Inverter Out without using an extra patch cable
Read more
MRP:$132.51 SAVE 17%
coming soon $110.41
FORTHCOMING
AniModule Quad Comparator Module
AniModule Quad Comparator Module (CV modulation / logic / comparater / utility / quad synth module)
Cat: 794399 Rel: 31 Dec 20
 
Quad comparator module
Notes: Simple quad comparator based around the LM339.

It will take your Voltages and turn them into Logic On.

When your signal is higher than the threshold the Gate goes high and the NOT Gate goes low.
When your signal is lower than the threshold the NOT gate goes high and the Gate goes low.

You can set the threshold anywhere from about -10V to +10V.

Input 1 is buffered then normalled to JackSwitches 2->4. So you could send an LFO in to Input 1, set different thresholds for all the inputs and have all the gates/NOT Gates fire at different points from the same LFO.

115 mA +12V
95 mA -12V
29 mm deep
O 5.00 (1 Votes) Average Rating
Read more
MRP:$191.41 SAVE 17%
coming soon $159.50
FORTHCOMING
AniModule ShNoiZe Module
AniModule ShNoiZe Module (noise / random / sample & hold synth module)
Cat: 794389 Rel: 31 Dec 20
 
Sample & hold module
Notes: This is your classic Sample and Hold.

Signal goes in - trip the threshold on the Pulse In - and the out will "hold" the voltage at the point when you triggered it.

There is a separate White Noise circuit. It is normalled to the S+H Input for all your random needs. There is also a Noise out so you can access it independently as well.

There is a slew knob so you can smooth and lag your output to taste

Current Draw: +12V = 23mA, -12V = -12mA

4HP, 29mm Deep
Read more
MRP:$132.51 SAVE 17%
coming soon $110.41
FORTHCOMING
AniModule SOB v1 Module
AniModule SOB v1 Module (state variable filter & waveshaper synth module)
Cat: 794397 Rel: 31 Dec 20
 
State variable filter module
Notes:  A State Variable Filter with an adjustable WaveFolder on the input.

Self-Oscillating Filter Tracks 1V/Oct

Vactrol Input allows you to control CutOff via gates/triggers without using up an EG

Pot to mix "Clean" and "Folded" signal levels

Filter and/or Fold Audio Or Control Voltages

2 Input Signal mixer

1 Input Control Voltage Mixer

1 Input to Vactrol for CV Modulation

1V/Oct In

current Draw: +12V = 31mA -12V = 34mA
Read more
MRP:$235.58 SAVE 17%
coming soon $196.30
FORTHCOMING
AniModule STD Syncopated Timing Disruptor Module
AniModule STD Syncopated Timing Disruptor Module (clock generator / clock modulator / logic synth module)
Cat: 793790 Rel: 31 Dec 20
 
Syncopated timing disruptor module
Notes: The STD, or Syncopated Timing Disrupter is a dual tap tempo clock with CV control for clock division and multiplication. If one wishes to synchronize the STD with other clocked gear, there is also a Gate input. The CV inputs can shift the clock to being upto 8x faster or /8 to be slower. This function is voltage controllable to turn the STD into a nonstop groove machine. Included in this are three logic functions that output gates depending on how the two channels are interacting. There is OR, ADD, and XOR logic functions.

2 Independent Tap Tempo Clock Channels
Prefer to use a Gate? No Prob! Just Patch in to the Gate Input.

Use the Div/Mult/Offset Pot to Multiply or Divide your Clock Time up to *8 - /8

Or patch In to the CV Input to Modulate the Mathematical Madness!
When CV is being input the Div/Mult/Offset Pot behaves as an Offset.

CV Input wants 0V to +5V, but whatever you got, Between the Offset, and the Front Panel CV Attenuators, it's easy to dial in your desired range of "On the Fly" Mathematical Clock Time Modulations.

Want to sync the 2nd channel to the first?
Latch the Ch1 - Ch2 switch and the Output of Channel 1 is normalled to the jack Switch of Channel 2.
You can still control the Multiplications / Divisions of each channel Independently!

If that wasn't enough to get you poppin' penicillin prophylactically there's more!

The bottom row of jacks constantly output OR, AND, and XOR Logic Combinations of the 2 channels combined!

Want to use something funky (like a Sine Wave / Envelope / Random Voltage Generator) to set the rhythm? The Input is a Buffered Comparator set to trigger at any signal above +1.2V

Perfectly happy up in to the Mid- Audio range.

6HP
+44mA
-16mA
Read more
MRP:$220.85 SAVE 17%
coming soon $184.03
FORTHCOMING
AniModule TikTok Module
AniModule TikTok Module (clock modulator synth module)
Cat: 793800 Rel: 31 Dec 20
 
Clock divider & multiplier module
Notes: The TikTok is a 4HP Clock Divider/Multiplier.
It has Divisions and Multiplications of:
*//2
*//3
*//4
*//5
*//6

There is a Clk Input and a Reset Input.
Both are buffered with an opamp based comparator circuit.
They are looking for approximately +1.1V on a rising edge.
This means that you are not constrained to gate (pulse) signals to trigger them.

The Reset input resets your divisions clock counter to 1

There is a switch to select Mathematical or Musical divisions.

The Multiplication Outputs 25MS Trigger pulses.
The Division Outputs are on as long as your Clock source.

Avg Current draw:
40 mA
-9 mA
Peak Current Draw:
80 mA
-17 mA

Width = 4HP
Depth = 38mm
Read more
MRP:$196.76 SAVE 17%
coming soon $163.95
FORTHCOMING
AniModule TrAniModule Module
AniModule TrAniModule Module (distortion / mixer / utility synth module)
Cat: 794385 Rel: 31 Dec 20
 
Transistor amplifier module
Notes: Behold the TrAniModule- A 1 Watt, Class A Transistor Amplifier in an 8HP, 29mm deep Package.

With a Line Input to jack your iPod or your Walkman up to synth levels.

You want to process your Line Level signal before you send it roaring out the belly of this little beast?

The Line out is normalled to the Mixer, so just plug in and it'll rip your signal away from the maws of this monster.

If you're looking for high fidelity, you better just slink back in to your studio with your Grandaddy's precious pretty monitors...

If you want portability and a warm sound that will drive when you crank it all the way, without knocking your granny off her chamber pot, We got'em both! AniModule has been working hard to help you achieve your Brown Note!

The Mix out is just a nice clean, buffered mix of your 2 Attenuatable Inputs and the Line Input.

The Speaker Out is normalled to the speaker in case you want to drive a bigger cab, or plug your pretty little headphones in, or capture the tone after the amplifier. If you plug in, the speaker cuts out, but the master will still control the volume- proving to be very handy for live performance.

...and really, if you want a nice clean sound, just dial back the levels a little bit!
Read more
MRP:$176.68 SAVE 17%
coming soon $147.22
FORTHCOMING
AniModule V9a Module
AniModule V9a Module (clock generator / sequencer / waveshaper synth module)
Cat: 793809 Rel: 31 Dec 20
 
VC sequencer & waveshaper module
Notes: Here's a powerful animal to add to your sequencing arsenal.

Send your CV to the CV In. As the Voltage increases the sequence steps forward. As the voltage decreases the sequence steps back.
Scale and adjust your input voltage to taste with the Onboard Attenuator and Offset.

Control the Output CV with an individual Potentiometer for each step.

When a step changes, a 10MS trigger is sent to it's corresponding switch. If the latching switch is depressed it allows the trigger to pass to the Trigger Out.

There is a switch per step for slew (portamento/slide).
and a Potentiometer to control the Slew Amount.
There is also an input to allow gated control of when the slew turns on and off which will work in conjunction with the switches.

This module is looking for 0V to +5V. The Offset is 0V to +5V.

To allow for chaining of the V9a and rests, 0V will put you under the sequencer range and +5V will put you over the sequencer range.
When the sequence drops below step 1 or over step 9, 0V will be sent to the CV Out and No Trigger will be sent to the Trig Out.
When step 1 or 9 is activated a trigger will be sent to the Trig buss.

Max Current Draw:
+12V = 40mA
-12V = 11mA

Width: 14HP Depth: 39mm
Read more
MRP:$306.52 SAVE 17%
coming soon $255.43
FORTHCOMING
AniModule XXX_OR Module
AniModule XXX_OR Module (clock modulator / CV modulation / logic / ring modulator synth module)
Cat: 794039 Rel: 31 Dec 20
 
XOR module with analogue & digital outputs
Notes: A Triple Analog XOR module with an Analog and a Digital (Gate) Output.

You can use the Gate Output for your normal Boolean XOR functions (feel free to input Analog signals.)

But the real magic happens at the Analog Output.

-Take 2 waveforms and feed 1 to A and 1 to B
-When 1 signal is low the other is normal
-When 1 signal is high the other is inverted

It's not just on and off like a digital XOR- you get all the varied nuances of a tri, sine or saw wave that you put in to it.

-The Analog Output of Channel 1 is normalled to Channel 2 A Input via the jack switch
-The Analog Output of Channel 1 is normalled to Channel 3 A Input

This way you can still use your Analog Out from each channel and not worry about patching the next XOR function in the chain together.

Use it for CV!
Use it for Clocking, Tempos and Rhythm manipulation!
Most of all Feed your Audio into it!

Width = 4HP Depth = 29mm

Current draw is:
+12V = +33 mA
-12V = -21 mA
Read more
MRP:$133.85 SAVE 17%
coming soon $111.54
FORTHCOMING
Arturia MicroFreak Vocoder Limited Edition (B-STOCK)
Cat: 800834
 
B-STOCK: Box slightly damaged, product unopened & in perfect working order
Notes: ***B-STOCK: Box slightly damaged, product unopened & in perfect working order***


The uniquely unpredictable MicroFreak but not as you know it. 14 digital oscillator modes, velvety analog filters and heaps of modulation/randomization controls, supercharged with wild vocoding abilities.

Arturia have created an entirely new 16-band mode to transform your voice in the Freakiest way possible. The vocoder engine features 3 waveforms - sawtooth, pulse width and noise - while the Timbre and Shape knobs adjust the response of the 16 frequency bands.

MicroFreak Vocoder Edition goes beyond robot vocals. 16 new presets give you instant access to android translations, crystalline harmonies and vibrant formant sequences galore. Connect an ex-ternal sound source like a drum machine or synth via the headphone socket for glitchy sound pro-cessing. Step up to the mic A simple, removable mic attachment that lets you sprinkle your voice into the mix. A gooseneck design means quick position adjustment, with easy connection straight into the headphone socket alongside your cans. The utility menu lets you set your preferred mic gain and noise gate settings. A new dress code First impressions make a difference. MicroFreak has always been out to make a statement, and the Vocoder Edition is no exception. The control panel has been given a makeover. The center strip boasts a bold new Swan graphic, while a sleek white finish makes this limited edition Freak stand out from the crowd - as if it didn't already. The Freak within Behind the revamped appearance and microphone attachment is the same lovable maniac that set the synth world spinning. Sparkling digital and wavetable oscillators collide with warm analog filters. A unique poly-after-touch PCB keyboard combines with a distinctly freaky arpeggiator & sequencer. Bathe your mix in sonic hysterics with the erratic mod matrix or the unique Spice & Dice randomizers.

Box contents:
MicroFreak Vocoder unit
Electret mic with gooseneck and headphone adapter
Power supply

Size & weight
Instrument size : 12.2 x 9.2 x 2.2 inches (311 x 233 x 55mm)
Instrument weight : 2.3 lbs. (1.02 Kg)

Read more
coming soon $268.07
FORTHCOMING
Arturia PolyBrute 6 Voice Analogue Polysynthesiser
Cat: 789226
 
6-voice analogue polysynthesiser
Notes: Imagine using 6 analog voices to craft a sound that's powerful, raw, and entirely yours. Imagine a sound existing in two states simultaneously in a single preset, with seamless morphing between them. Imagine multi-axis performance controls offering next-generation musical expression. Imagine instant and limitless modulation at your fingertips. Imagine a polysynth made by musicians, for musicians.

Raw, powerful, organic. The analog Brute voice is an unmistakable sonic force to be reckoned with - how about six at once?

PolyBrute's six-voice power starts with two Brute waveshaping oscillators. With sprawling timbral versatility from delicate airy pads to snarling stacked bass, these are six voices you can count on to excel in every application.

The tactile and reactive nature of analog synthesis is right at the heart of PolyBrute's architecture. Tame or animate the oscillators with an expanded array of multiple filters, envelopes and LFOs for absolute control over the analog domain. Once you've harnessed its sound sources, PolyBrute is your vessel for an inspiring voyage into sound.

PolyBrute's morphing abilities let you perform, compose, and explore sound without boundaries.

Imagine being able to sweep all the parameter settings between two different patches all at once. PolyBrute goes even further with its groundbreaking ability to gradually morph between two completely different states within any patch.

For morphing to work, hands-on control is essential - PolyBrutes takes it to another level. The all-new Morphee three-dimensional performance touchpad ensures that intricate morphing expression is always right at your fingertips. Manipulate any facet of PolyBrute's sound, from delicate morphing to extreme dynamic shifts, across the X, Y and Z axis in an instant.

It doesn't end there; PolyBrute is armed to the teeth with articulate controllers to give your performances and compositions the elusive human touch.

This unparalleled sonic flexibility and expressivity is what earns PolyBrute its place in synthesizer history - a trailblazer of creativity.

The Matrix- the digital brain for PolyBrute's analog heart. The Matrix is where PolyBrute's analog reactivity and digital precision collide - an advanced architecture unlike any synth before it.

PolyBrute puts all that analog power right up front with dedicated knobs and switches, offering unmatched control and immediacy.

Almost everything you touch also generates MIDI, so you can capture your every move as part of your DAW productions. Need some instant attitude? Crank up the enhanced Steiner filter's Brute Factor. Want to change the cutoff on both filters at once? Grab the Master Cutoff knob. Time to move the floor beneath your feet? Dial in VCO 2's sub-oscillator. It's all right there in front of you.

Library management, parameter editing, and instant integration with your DAW.

Hook PolyBrute up to your computer and enjoy seamless bi-directional editing and organization. PolyBrute Connect bridges the gap between hardware and software like never before, letting you incorporate its expansive sound into your virtual studio workflow. Construct patches, go deeper with morphing tweaks, and control PolyBrute's sound in real-time from your Mac or PC - simple.

An instrument of this magnitude is deserving of only the highest attention to detail - PolyBrute is a synthesizer years in the making.

It's undergone rigorous testing to ensure a build quality of the finest calibre. Controls, buttons, and expressive components that are a delight to use, time after time. Its pristine metal chassis is embellished with luxurious dark walnut appointments for a timeless aesthetic, with a sleek, modern flare that sets it apart from the crowd.

PolyBrute is something unmistakably new, while remaining firmly rooted in synth design heritage.

Analog Morphing Synthesizer:
6 voices of Polyphony
Mono, Unison, Poly voicing
Single, Split, Layer modes

Two Analog VCOs:
Saw
Triangle + Metalizer
Square + Pulse Width
Sub
Linear FM
Hard Sync

Three LFOs:
LFO1 and LFO2 with waveform selection
LFO3 with waveform shaping using Shape and Symmetry
Rate control & Tempo Sync
Various retrig options

Three stereo digital effects:
Modulation FX : Chorus, Phaser, Flanger, Ring Modulation, ...
Delay : 9 algorithms including BBD, Digital delay, ...
Reverb : 9 algorithms including Hall, Plate, Spring, Shimmer,

Box contents:
PolyBrute unit
Power cable

Instrument size : 38.3 x 14.9 x 4.4 inches (972 x 378 x 110mm)
Instrument weight : 44 lbs. (20 Kg)
Read more
MRP:$3,023.67 SAVE 17%
coming soon $2,519.73
FORTHCOMING
Beats Studio3 Bluetooth Wireless Noise Cancelling Over-Ear Headphones (blue)
Cat: 794254
 
Bluetooth wireless noise-cancelling headphones
Notes: Beats Studio3 Wireless headphones deliver a premium listening experience with Pure Active Noise Cancelling (Pure ANC). Beats' Pure ANC actively blocks external noise and uses real-time audio calibration to preserve clarity, range and emotion. They continuously pinpoint external sounds to block while automatically responding to individual fit in real time, optimising sound output to preserve a premium listening experience the way artists intended.

Incorporating the efficient Apple W1 chip brings seamless setup and switching for your Apple devices, up to 22 hours of battery life for all-day fully-featured playback with Pure ANC on, and Fast Fuel technology for 3 hours of play with a 10-minute charge. Pure ANC-off for low-power mode provides up to 40 hours of battery life.

Take calls, skip songs, control volume and activate Siri using the convenient multi-function on-ear controls. The Apple W1 chip features Class 1 Bluetooth connectivity - the industry-leading classification for range and signal strength. With best-in-class performance, Beats Studio3 Wireless seamlessly syncs to your devices, so you can easily move about, keep the music going and stay productive all day.

The Beats Studio3 Wireless headphone is designed for long-term comfort to match its impressive battery life of up to 22 hours for all-day play. The soft over-ear cushions feature advanced venting and signature ergonomic pivoting for a custom, flexible fit for any head shape. The holistic design is lightweight, durable and comfortable, so you can get lost in your music.

Read more
coming soon $471.81
FORTHCOMING
Beats Studio3 Bluetooth Wireless Over-Ear Headphones (Skyline Collection) (midnight black)
Cat: 794266
 
Bluetooth wireless over-ear headphones
Notes: Beats Studio3 Wireless headphones deliver a premium listening experience with Pure Active Noise Cancelling (Pure ANC). Beats' Pure ANC actively blocks external noise and uses real-time audio calibration to preserve clarity, range and emotion. They continuously pinpoint external sounds to block while automatically responding to individual fit in real time, optimising sound output to preserve a premium listening experience the way artists intended.

Incorporating the efficient Apple W1 chip brings seamless setup and switching for your Apple devices, up to 22 hours of battery life for all-day fully-featured playback with Pure ANC on, and Fast Fuel technology for 3 hours of play with a 10-minute charge. Pure ANC-off for low-power mode provides up to 40 hours of battery life.

Make calls, skip songs, control volume and activate Siri using the convenient multi-function on-ear controls. The Apple W1 chip features Class 1 Bluetooth connectivity - the industry-leading classification for range and signal strength. With best-in-class performance, Beats Studio3 Wireless seamlessly syncs to your devices, so you can easily move about, keep the music going and stay productive all day.

The Beats Studio3 Wireless headphone is designed for long-term comfort to match its impressive battery life of up to 22 hours for all-day play. The soft over-ear cushions feature advanced venting and signature ergonomic pivoting for a custom, flexible fit for any head shape. The holistic design is lightweight, durable and comfortable, so you can get lost in your music.

Read more
coming soon $471.81
FORTHCOMING
Befaco DIN5 MIDI To TRS Type B Cable (1.5m, pack of 3)
Cat: 784170
 
DIN5 to TRS cable
Notes: 3,5mm TRS to male DIN 5

150cm length
Read more
MRP:$16.06 SAVE 31%
coming soon $11.15
FORTHCOMING
Behringer 110 VCO/VCF/VCA Module
Cat: 799848 Rel: 11 Jan 21
 
VCO/VCF/VCA Module
Notes: Legendary Analog VCO/VCF/VCA Module for Eurorack

The 80s was the golden age of electronic music. Synthesizers were at their prime and almost every hit song and movie soundtrack at that time had a synth in one form or another. Modular synths have become more and more popular with professionals and enthusiasts over the years and they're about to get even better.

This is the Behringer System 100 110 VCO/VCF/VCA Module. An authentic reproduction of the original "System 100M" circuitry from the 80s that can fit in a standard Eurorack case. The best part? It's at a very affordable price. Mix the 110 in with your existing rig or start your modular synth journey from here. Either way you're sure to have a lot of fun!

The 110 comes with a complete synth voice with an internally patched signal flow for ease of use and to save patching time so you can focus on your music. You can vary the VCO section by selecting one of three waveforms; triangle, ramp and Pulse Width Modulation which can be adjusted by the Mod Manual knob. The VCO also offers pitch and range control knobs as well as one audio output, which can be routed to another source, and two CV inputs.

The VCF features cutoff frequency and resonance sliders while the VCA comes with two audio outputs (low/high). Both the VCF and VCA each feature two audio inputs and two CV inputs that allow for other sources to be plugged into the 110, making it a must-have in any modular synth.

Installing the 110 VCO/VCF/VCA is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and mount the module using the included screws. This allows for the 110 VCO/VCF/VCA to be mixed with other synth modules for a truly unique set up.

Whether you're just getting into modular synths or looking to complete your collection, the 110 VCO/VCF/VCA module from Behringer is a great tool to have when creating amazing music.

Specification:

Inputs
Pulse width mod
Type
3.5 mm TS jack, DC coupled

Impedance
>70 kO, unbalanced

Maximum input level
0 V to +10 V, 4% per volt

Signal input
Type
Impedance
>50 kO, unbalanced

Max input level
+17 dBu @ unity gain

VCO mod input
Type
2 x 3.5 mm TS jacks, summed

Impedance
>50 kO, unbalanced

CV range
0 V to +10 V, 1 V/oct

VCF mod input
Type
2 x 3.5 mm TS jacks, summed

Impedance
>50 kO, unbalanced

CV range
0 V to +10 V, 1 V/oct

VCA mod input
Type
2 x 3.5 mm TS jacks, summed

Impedance
>50 kO, unbalanced

CV range
0 V to +10 V, typically 1 V per 10 dB

Outputs
VCO output
Type
3.5 mm TS jack, DC coupled

Impedance
1 kO, unbalanced

Max output level
10 V p-p

Frequency range with no external CV
<10 Hz to 500 Hz

Frequency range using external CV
<1 Hz to 30 kHz

VCA output
Type
2 x 3.5 mm TS jacks, AC coupled

High impedance
1 kO, unbalanced

Low impedance
3 kO, unbalanced

High max output leve
+18 dBu

Low max output level
-2 dBu

High output noise
<-60 dBu, 22 Hz -22 kHz

Low output noise
<-80 dBu, 22 Hz -22 kHz

Controls
Pulse width manua
50% to min

Waveform
Triangle, sawtooth, pulse

Range
32', 16', 8', 4', 2'

Pitch
2 octave range

Cutoff frequency
20 Hz to 20 kHz

Resonance
Off to self oscillation

Sig in level
-8 to unity gain

Mod in level
-8 to unity gain

VCA initial gain
Power
Power supply
Eurorack

Current draw
80 mA (+12 V), 50 mA (-12 V)

Physical
Dimensions
81 x 129 x 46 mm (3.2 x 5.1 x 1.8")

Rack units
16 HP

Weight
0.19 kg (0.42 lbs)
Read more
coming soon $93.68
FORTHCOMING
Behringer 2600 Semi-Modular Analog Synthesizer
Behringer 2600 Semi-Modular Analog Synthesizer (semi-modular analog synthesizer)
Cat: 799849 Rel: 11 Jan 21
 
Analogue synthesiser with 3 VCOs and nulti-mode VCF
Notes: Semi-modular analog synthesizer with 3 VCOs and multi-mode VCF in 8U rackmount format.

An ultra-affordable and even more feature-packed homage to that iconic synthesizer comes in the form of the Behringer 2600. Conjure up the virtually any sound imaginable with incredible finesse and ease. The pure analog signal path is based on the authentic ARP 2600 circuitry from the 70s with matched transistors and JFETs. Owning a 2600 is like having your piece of history enabling you to re-create timeless classics or forge your own musical path.

Great care has been taken in engineering the 2600, including the true-to-the-original analog circuitry, semi-modular architecture and triple VCO designs that come together to recreate classic tones that are evocative of classic electronic music. This highly focused attention to detail is what gives the 2600 its ultra-flexible sound shaping capability. It gives you the ability to cover a lot of amazing tones from super-fat bass, tasty leads - all the way to full on dreamy ambience from the far reaches of your imagination.

Specification

Input
VCO 1 / 2 / 3
Frequency modulation (FM) control
11 x 3.5 mm TS jacks, CV range: -10 V to +10 V

Pulse width modulation (PWM)
2 x 3.5 mm TS jack, CV range: -5 V to +5 V, 1 V/10%

VCF
Audio
5 x 3.5 mm TS jacks, 50 kO unbalanced

Control
3 x 3.5 mm TS jacks, CV range: -10 V to +10 V

ADSR / AR envelope generator
S&H clock
1 x 3.5 mm TS jack, threshold: > 6 V

Gate in
1 x 3.5 mm TS jack, threshold: +4 V

Trig in
1 x 3.5 mm TS jack, threshold: +5 V

VCA
Audio
2 x 3.5 mm TS jacks, 50 kO unbalanced

Control (linear
1 x 3.5 mm TS jack, CV range: -10 V to +10 V

Control (exponential)
1 x 3.5 mm TS jack, CV range: -10 V to +10 V

Mixer / Reverb
Audio
2 x 3.5 mm TS jacks, 50 kO unbalanced

Left / right inputs
2 x 3.5 mm TS jacks, 50 kO unbalanced

LFO
Ext vib in
1 x 3.5 mm TS jack, 50 kO unbalanced
Read more
coming soon $557.70
FORTHCOMING
Behringer 305 EQ/Mixer/Output Synth Module
Cat: 799850 Rel: 11 Jan 21
 
EQ/mixer/output synth module
Notes: Legendary Analog Parametric EQ, Mixer and Output Module for Eurorack.

This is the Behringer System 100 305 EQ/MIXER/OUTPUT Module. A parametric EQ, mixer/oscillator and headphone amp combo that's an authentic reproduction of the original "System 100M" circuitry from the 80s that can fit in a standard Eurorack case. The best part? It's at a very affordable price! Mix the 305 in with your existing rig or start your modular synth journey from here. Either way you're sure to have a lot of fun!

The 305 allows for maximum tone shaping with its 4-channel EQ section complete with level, bandwidth and frequency controls that span a wide frequency spectrum from 20 Hz all the way up to 20 kHz. Using the two outputs of this section, you can then patch signals to two different modules for some extra modulation and waveform sculpting possibilities and even switch between EQ'd and Bypass modes for a quick comparison.

For added mixing capabilities, you can use the 305's 4-input mixer with individual pan and level controls. The output signal can be in either mono or stereo via 3.5mm and 14" jacks. Monitor your overall signal though the independent headphone output and its included level control.

Installing the 305 EQ/MIXER/OUTPUT is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and mount the module using the included screws. This allows for the 305 EQ/MIXER/OUTPUT to be mixed with other synth modules for a truly unique set up.




Read more
coming soon $93.68
FORTHCOMING
Behringer DI4800A Professional 4-Channel Active DI-Box/Booster/Line Isolator
Cat: 799851 Rel: 11 Jan 21
 
DI-Box/booster/line isolator
Notes: Professional 4-Channel active DI-Box, booster, and line isolator.

THE ULTRA-DI PRO DI4800A gives you 4 first-class DI channels in a single rack space. Each channel is equipped with one input (XLR or 14" TRS) and two XLR Outputs at the front and back to connect to your amp or monitor console allowing for 8 outputs in all. Plus, the DI4800A is designed to accommodate virtually any input signal, with a switchable output attenuation of -20 dB, while our highly acclaimed OT-1 output transformers ensure pristine and powerful output.

Direct Injection (DI) boxes make it possible to connect guitars, basses and keyboards (as well as other line-level devices) to audio mixers and recorders. The DI4800A takes the DI box to the next level by providing +6 dB and +12 dB gain switches for a total of +18 dB of gain boost perfect for amplifying low-level signals. The DI4800A also features a -20 dB attenuation switch per channel, gold-plated XLR output connectors which provide reliable, low-noise operation and per channel ground-lift switches to eliminate ground-loop hum issues.

Read more
coming soon $92.57
FORTHCOMING
Behringer Dual Noise/Random Voltage Generator Module 1016
Cat: 799852 Rel: 11 Jan 21
 
Dual noise/random voltage generator module
Notes: Legendary 2500 series dual noise source module for Eurorack.

This is the Behringer 2500 series DUAL NOISE/RANDOM VOLTAGE MODULE 1016. An authentic reproduction of the original "System 2500" circuitry from the 70's that can fit in a standard Eurorack case. The best part? It's at a very affordable price. Mix the DUAL NOISE/RANDOM VOLTAGE MODULE 1016 in with your existing rig or start your modular synth journey from here. Either way you're sure to have a lot of fun.

The DUAL NOISE/RANDOM VOLTAGE MODULE 1016 is a classic discrete transistor white/pink/random noise source with independent attenuators for the white/pink noise level, a white /pink selector switch with color coded LED's. The slow random voltage generator produces random CV voltages and the maximum level can be controlled via the attenuators as well as an on/off switch with LED indicators for each channel. The 2 channels are completely independent of each other for even more creative possibilities.

The 1016 gives you comprehensive connectivity, each channel has a separate white/pink noise output and separate outputs for the random voltages, the outputs are all available simultaneously to feed multiple noise and CV signals to other modules.

Installing the DUAL NOISE/RANDOM VOLTAGE MODULE 1016 is easy as it is designed to fit into a standard Eurorack case. Just connect the power cable to the power supply and screw in the module using the included screws. This allows for the 1016 to be mixed with other synth modules for a truly unique set up.

Specification:

Outputs
Noise
Type
2 x 3.5 mm TS jacks, DC coupled

Impedance
1 kO, unbalanced

Max output level
i5 V

Random
Type
2 x 3.5 mm TS jacks, DC coupled

Impedance
1 kO, unbalanced

Max output level
i5 V

Controls
Noise
Attenuates noise generator output

Random
Attenuates voltage output

White/pink/of
Selects white or pink noise, or of

Random on/of
Engages or disengages voltage generator

Power
Power supply
Eurorack

Current draw
45 mA (+12 V), 15 mA (-12 V)

Physical
Dimensions
42 x 71 x 129 mm (1.7 x 2.8 x 5.1")

Rack units
14 HP

Weight
0.13 kg (0.29 lbs)

Read more
coming soon $94.81
FORTHCOMING
Behringer Multimode Filter/Resonator Module 1047
Cat: 799853 Rel: 11 Jan 21
 
Filter/resonator synth module
Notes: Legendary 2500 Series 12dB state variable filter module for Eurorack.

This is the Behringer 2500 series MULTIMODE FILTER/RESONATOR MODULE 1047. An authentic reproduction of the original "System 2500" circuitry from the 70's that can fit in a standard Eurorack case. The best part? It's at a very affordable price. Mix the MULTIMODE FILTER/RESONATOR MODULE 1047 in with your existing rig or start your modular synth journey from here. Either way you're sure to have a lot of fun.

The MULTIMODE FILTER/RESONATOR MODULE 1047 is a classic voltage controlled 12 dB per octave state variable filter, the filter is a matched transistor design for a vintage sound. The 1047 filter is equipped with a coarse and fine filter frequency controls, a resonance (Q) control which acts on all 4 filter outputs, a resonance limit switch prevents signal overload when high levels of resonance are used, the notch frequency/fc control allows the notch frequency to be adjusted up or down from fc as set by the frequency controls, 2 summed frequency CV attenuators and a resonance (Q) CV attenuator for maximum flexibility, the signal input is also equipped with an attenuator. All this gives you endless possibilities of filter curve shape to create the ultimate sound.

The 1047 gives you comprehensive connectivity, filter signal input, FCV 1 and FCV 2 inputs can be used for filter frequency control or modulation, the Q CV input allows modulation of Q and resonance. The independent low-pass, high-pass, band-pass and notch filter outputs are all available simultaneously to feed multiple filter signals to other modules.

Installing the MULTIMODE FILTER/RESONATOR MODULE 1047 is easy as it is designed to fit into a standard Eurorack case. Just connect the power cable to the power supply and screw in the module using the included screws. This allows for the 1047 to be mixed with other synth modules for a truly unique set up.



Read more
coming soon $94.81
Items 1 to 50 of 263 on page 1 of 6
1  2  3  4  5  6  »

Filter

Coming Soon: Studio Equipment
Close