安全购物

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

安全购物

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Coming Soon: Studio Equipment

首页  Coming Soon  

Studio Equipment

Options
Items 1 to 42 of 42 on page 1 of 1
FORTHCOMING
Tangerine Dream: Itinerary: The Concert Memorabilia 1970-2014
Cat: 779750
 
10x12" memorabilia collection in coffee-table book format
Notes: This complex work is a painstakingly detailed and incredibly massive exhibit of Tangerine Dream's paper past. Presented in a 10x12" (ca. 25x30 cm) coffee-table book format - specifically designed to sit beside Edgar's Force Majeure autobiography perfectly, "Itinerary" has a scope of about 452 pages, and contains over 1,100 images of TD's posters, flyers, tickets, passes, programs, invitations, contracts, stage plots, spreadsheets, memos, itineraries, telexes, receipts, press releases, etc. - all of which has been described by one of the world's leading collectors of music memorabilia to be "the most astonishing collection of memorabilia by one band" he's ever seen.
Read more
coming soon $86.31
FORTHCOMING
Behringer 3 Tier Eurorack Module Stand Case
Cat: 780468
 
module stand case
Notes: Behringer Eurorack Stand 3-Tier; desktop stand for mounting up to 3 Eurorack 104 cases (item 463669), or 3 Behringer synthesizers (e.g. Pro-1, Wasp Deluxe, K-2, Neutron, Model D, Cat).

Variable width (70 HP, 80 HHP or 104 HP); rugged aluminum/steel construction.
Read more
coming soon $67.96
FORTHCOMING
Tangible Waves AE Modular ALGODRONE Bytebeat Algorithms Module
Cat: 786475 Rel: 31 Dec 20
 
Algorithms module
Notes: Explore the world of bytebeat algorithms with ALGODRONE!

The ALGODRONE module is a sound source based on the so-called bytebeat algorithms. These are simple formulas, usually expressed as one line of program code, that spit out a wide variety of interesting tonal to rhythmical patterns, regardless of their simplicity.

The ALGODRONE module contains a number of these algorithms plus three parameter knobs that change values within the current algorithm. These changes vary from subtle to dramatic, even with small changes, depending on the algorithm and the setting of the other parameters.

Some algorithms create sound loops, to use these more flexible the ALGODRONE can work in a kind of "granular" mode where a smaller part of the entire loop is repeated and with the POSITION knob you can move through the entire output loop.

To maximize the variability, the parameter and "granular" values can be CV controlled too!

All in all a real kaleidoscope that will surprise you every time!
Read more
MRP:$99.70 SAVE 17%
coming soon $83.07
FORTHCOMING
Tangible Waves AE Modular QUANTIZER Automatic Musical Scales Module
Cat: 786489 Rel: 31 Oct 20
 
Quantizer module
Notes: The QUANTIZER takes four different CV inputs and processes them in a way that the CV values "snap" to the exact values so that oscillators controlled by the outputs of the module play the notes of a selected musical scale. With an encoder one of 16 scales can be selected and is displayed in a text display,

There are 4 independent channels that are quantized to the same selected scale.

As an additional feature, the module provides a trigger signal for each channel on every change on the output CV.

Finally, with a switch the scale selection can be "frozen" so there is no accidental change possible.

There are 4 independent channels that are quantized to the same selected scale.

Module power consumption: 15 mA

Inputs
CV 1 - accept CV for channel 1 of the quantizer
CV 2 - accept CV for channel 2 of the quantizer
CV 3 - accept CV for channel 3 of the quantizer
CV 4 - accept CV for channel 4 of the quantizer
Outputs
CV 1 - Quantized CV from channel 1 of the quantizer
CV 2 - Quantized CV from channel 2 of the quantizer
CV 3 - Quantized CV from channel 3 of the quantizer
CV 4 - Quantized CV from channel 4 of the quantizer
TRIG 1 - Gate signal on change of CV from channel 1 of the quantizer
TRIG 2 - Gate signal on change of CV from channel 2 of the quantizer
TRIG 3 - Gate signal on change of CV from channel 3 of the quantizer
TRIG 4 - Gate signal on change of CV from channel 4 of the quantizer
MULT - unbuffered multiple, unconnected from the module's circuitry
B. CV - CV signal from MIDI
Please note:

The notation of the outputs is slightly different on the panel than indicated here. There are two rows of identical outputs, side by side. For each output-trigger there is an activity LED, indicating a change in quantized CV.

Controls
SCALE Knob - selects the current scale. 16 scales are available, the selected scale will be displayed in the small display to the right of this knob
LOCK Switch - prevents accidental changes of the selected scale when activated
OFFSET Knob - Select from up to 12 notes from the well-tempered scale as base-value, depending on the scale selected. All left would be equivalent to a key of C
Please note:

Scale selection directly takes place when the SCALE Knob is turned, clicking it has no specific effect.

Available SCALES, as indicated on the display, are as follows:

Minor (e.g. equivalent to A-B-C-D-E-F-G in ‘A minor’)
Major (e.g. equivalent to C-D-E-F-G-A-B in ‘C major’)
Dorian (e.g. equivalent to C-D-Eb-F-G-A-Bb in ‘C Dorian mode’)
Phrygian (e.g. equivalent to C-Db-Eb-F-G-Ab-Bb in ‘C Phrygian mode’)
Lydian (e.g. equivalent to C-D-E-F#-G-A-B in ‘C Lydian mode’ )
Mixolyd [Mixolydian] (e.g. equivalent to C-D-E-F-G-A-Bb in ‘C Mixolydian mode’ )
Locrian (e.g. equivalent to C-Db-Eb-F-Gb-Ab-Bb in ‘C Locrian mode’)
Gypsy (e.g. equivalent to C-D-Eb-F#-G-Ab-B in ‘C Hungarian minor scale’ )
Whole (equivalent to C-D-E-F#-G#-A# or B-Db-Eb-F-G-A as ‘Whole tone scales’)
Pent Min [Pentatonic Minor] (e.g. equivalent to C-Eb-F-G-Bb in ‘C Minor pentatonic’)
Pent Maj [Pentatonic Major] (e.g. equivalent to C-D-E-G-A in ‘C Major pentatonic’)
1-3-5 (e.g. equivalent to C-E-G in ‘C’)
1-3-4 (e.g. equivalent to C-E-F in ‘C’)
Fifth (e.g. equivalent to C-G in ‘C’)
Octave (e.g. equivalent to C in ‘C’)
Chromat (The 12 welltempered notes of the chromatic scale)
Read more
MRP:$76.39 SAVE 17%
coming soon $63.65
FORTHCOMING
Tangible Waves AE Modular SOLINA String Machine Emulation Module
Cat: 786501 Rel: 31 Dec 20
 
String machine emulation module
Notes: SOLINA, an emulation of the 70ies string machines!

The SOLINA module is based on th excellen work of Jan Ostman, who has developed a very good digital based emuation of the sound of the string synths that were popular in the music of the 70ies and 80ies, like ARP Solina (who gave this module it's name), Logan String and others.

Their unique sound is based on several, minor detuned sawtooth oscillators and an ensemble effect.

This module produces chords, which can be shaped in different ways, like selecting the base scale (minor, major), adding the 7th or a bass note and different variations of the chord. The sound can be shaped with a variable oscilator spread/detune, adding a phaser/ensemble and a tone knob for choosing the overall character between bass focused to only higher parts of the sound.
Read more
MRP:$93.23 SAVE 17%
coming soon $77.68
FORTHCOMING
Division 6 Business Card Sequencer V2
Cat: 777968
 
business card sequencer
Notes: The Division 6 packs a lot of sequencer into a tiny package! This 16-step circuit can work as a sequencer or as a handheld keyboard.

Specifications:
Power In: 7-15VDC, tip positive through a 3.5mm jack. Find a voltage source on your synth to power it if you can! A 9V battery or AC adapter will work too.

Power supply: 7-15VDC (reverse-polarity protected!)
Power connection: 3.5mm phone jack, center-positive
Current draw: 15ma
Dimensions: 3.5" x 2" (the same as a business card!)
Read more
MRP:$107.47 SAVE 19%
coming soon $87.39
FORTHCOMING
Division 6 Business Card Synthesizer (fully assembled)
Cat: 777973
 
business card synthesiser
Notes: The Business Card Synthesizer is a tiny synth that can be connected to a Business Card Sequencer, other synth gear, or played by itself.

Headphones can be connected directly to the output of the synth, and there are plenty of knobs to play with, so you can easily make noises anywhere. Great for learning about synthesizers!

S&H Button: Enables Sample & Hold, which disables the external CV IN jack and uses LFO1 and LFO2 to determine oscillator pitch. LFO1 sets the sample rate (SHAPE is ignored for this), and LFO2 is the wave that gets sampled.

GATE Button: Manually turns on the gate so sound comes out of the synth. This control is momentary, but you can latch it on by tapping the S&H button while holding the GATE button down.

COARSE TUNE: Adjusts the pitch of the oscillator up or down in large increments

FINE TUNE: Adjusts the pitch of the oscillator up or down in fine increments

SHAPE: Changes the shape of the wave produced by the main oscillator (VCO). Turning this control fully CW gives you a triangle wave. Start turning it CCW takes you through sawtooth/ramp, then at about the 12:00 position you get a square wave. Continue turning it CCW and you get several higher duty cycle square waves
.
GLIDE: Adjusts the rate at which the pitch of the VCO takes to go between pitches (whether changed by the COARSE TUNE knob or CV IN). Fully CCW causes the pitch to react almost instantly, while fully CW makes it take its sweet time.

LFO 1 / LFO 2 SHAPE: Changes the shape of the waves produced by the low-frequency oscillators (LFOs). The shapes are similar to those of the VCO, except that the LFOs have sawtooth/ramp waves that go both up and down (since you can actually hear the difference at LFO rates).

LFO 1 / LFO 2 RATE: Controls how fast the LFOs go.

LFO -> VCO: Routes the two LFOs to control the pitch of the main oscillator. The 12:00 position is basically "off", and the LFOs have no effect on pitch. Start turning the control CCW and LFO1 starts changing the pitch of the VCO. Maximum effect is at about 10:00. Continuing to turn the control starts to bring in LFO2 as well. All the way CCW gives you full effect from both LFO1 and LFO2.

Turning the control CW from 12:00 does essentially the same thing, but brings in LFO2 first, then LFO1.

This might seem like kind of a weird control, but it gives you quite a bit of routing flexibility with one knob. You can have no pitch modulation, LFO1, LFO2, LFO1 with a little LFO2, or LFO2 with a little LFO1.

LFO -> VCA: Routes the two LFOs to control the amplitude of the oscillator. (See LFO -> VCO control description above for more information about how the control works.)

ATTACK: Controls how fast the audio amplitude fades in when the gate is triggered. CCW is fast and CW is slow.

DECAY: Controls how fast the audio amplitude fades out when the gate is released. CCW is fast and CW is slow.

VOLUME: Controls the overall volume of the signal coming from AUDIO OUT.

FILTER: Changes the cutoff frequency of an analog low-pass filter. Turn the knob fully CW and all frequencies (that you can hear) are let through. Start turning it CCW and the high frequencies start getting cut off, until the sound becomes muddy / muffled. Use in conjunction with the SHAPE control to get the tonal quality you are looking for.

Connections:
CV IN: Accepts a 1 volt/octave control voltage to control the pitch of the oscillator. It responds from about 0-5V, but voltages outside of this range won't cause damage. The CV input is quantized, so only valid (western scale) notes are played. This input is ignored when Sample & Hold is enabled.
GATE IN: A voltage greater than about 2.5V will turn on the gate and allow audio to come out the output of the synth.
AUDIO OUT: Connect to an amplifier or another synth. The jack has both the tip and ring connected, so you can even use stereo headphones and hear sound from both ears.
Power: Connect 7.5-15VDC to this 3.5mm TS jack to power the synthesizer. The tip is positive (don't worry, there's a protection diode in case you get it reversed). You can get power from a 9V battery, AC adapter, or you may even be able to find an output on your modular synthesizer that can provide enough current.

Specifications:
Power supply: 7-15VDC (reverse-polarity protected!)
Power connection: 3.5mm phone jack, center-positive
Current draw: 15ma
Dimensions: 3.5" x 2" (the same as a business card!)
Read more
MRP:$107.47 SAVE 19%
coming soon $87.39
FORTHCOMING
Erica Synths Sequential Switch V1 Module
Cat: 780453
 
Switch module
Notes: Erica Synths 8 channel Sequential Switch is the first assembled module for Erica synths, and it allows you to sequence up to eight sound sources in advanced ways or route one sound source sequentially to eight different sound modifiers- VCFs, waweshapers, VCAs, etc.

It has unique control interface that allows you to pause, skip and merge steps, set sequence length, but what really sets it apart from other sequential switches is Gate output- when used with ADSR and VCA, you get really powerful sequencer with real time control over each sound source in the sequence. Use sequential Switch with random clock source and you get a heart of insane random, self-generating patches!

Technical characteristics:

Panel width: 14HP
Module depth: 20mm
Max power consumption (all LEDs on): 52mA@+12V, 13mA@-12V
Read more
MRP:$145.02 SAVE 54%
coming soon $66.89
FORTHCOMING
Tangible Waves AE Modular SEQ8 Analogue 8-Step CV Sequencer Module
Cat: 786498 Rel: 31 Oct 20
 
8-step CV sequencer module
Notes: An analog 8-step CV sequencer.

The SEQ8 is an 8-step sequencer for controlling oscillator pitch and triggering envelopes.

Compared to "classic" analog sequencers it works a bit different: Instead of setting the CV for each step independently (which means in fact "tuning" each step which can be a bit tedious), the SEQ8 has 4 knobs for presetting different CV's (= notes); each of the 8 step knobs selects one of these CVs, plus 0V (=base note) plus Pause (no trigger output). So some CVs have to be fine-tuned once; with the step knobs you can focus entirely on the sequence itself and you can even modify it on the fly, still remaining in tune.

Additionally to the selected CV presets, the "raw" value of the step knobs is also accessible at an extra output.

Module power consumption: 7 mA
Read more
MRP:$62.15 SAVE 17%
coming soon $51.78
FORTHCOMING
Citronic CM25 Studio Condenser Microphone
Citronic CM25 Studio Condenser Microphone (studio condenser microphone)
Cat: 778591
 
large diaphragm condenser microphone
Notes: Large diaphragm condenser microphone with cardioid polar response pattern for accurate reproduction of vocals and instruments in a recording or broadcast studio. All metal construction with a bespoke shock-mount and magnetic pop-shield included, ready to mount to a standard microphone stand or boom arm. Connection via XLR for high quality balanced audio output and phantom power from a mixing console or dedicated phantom power supply. Supplied with a 3m balanced XLR lead in a fitted aluminium transit case.

The box for this item contains :

CM25 condenser microphone
Fitted shock-mount cradle
Magnetic pop shield
3m balanced XLR lead
Aluminium transit case

Power supply: 30 - 48V phantom power (via XLR)
Construction: Zinc alloy body and steel grille
Capsule: 25mm: O nickel sputtered diaphragm
Output impedance: 2.2k Ohm
S/N ratio: 68dB (A-weighted)
SPL max.120dB (1kHz)
Lead length: 3m
Read more
MRP:$89.34 SAVE 31%
coming soon $61.49
FORTHCOMING
Eurorack Hardware Modules AMIX Active Audio & CV Mixer Module (black faceplate) (fully assembled)
Notes: The AMIX module from Eurorack Hardware has three channel (active) powered mixer in 2HP for Eurorack. Great for both Audio and CV sources. Matte black panel with white graphics. Max gain of 1.
Current Draw: +12=15mA, -12=10mA, +5=0
Read more
MRP:$86.75 SAVE 19%
coming soon $70.13
FORTHCOMING
Sensel Buchla Thunder Overlay For Morph MIDI Controller
Cat: 785456 Rel: 22 Oct 20
 
Overlay
Notes: The legendary expressive controller, the Buchla Thunder, now comes to the Sensel Morph in an exclusive new partnership with Buchla U.S.A.

The Buchla Thunder Overlay exclusively features a new preset system to the Morph. By holding the preset button and tapping on one of the nine numerical keys, you can easily and instantly switch between nine mappings without needing to open the SenselApp. Need to go from an instrument controller to a virtual mixer? Want to swap between scales? Presets add a seamless extension of expressive control possibility to the Buchla Thunder Overlay.

The Buchla Thunder is uniquely well-suited to a variety of instruments - from synthesizers with rich and evolving timbres, to acoustic samples that benefit from a more human touch, to hardware synthesizers like the legendary Buchla Easel. You can witness the richness of expression in the videos above.

The MIDI protocol is USB Class-compliant and supports MIDI Polyphonic Expression (MPE) and Bluetooth MIDI.

Read more
MRP:$82.87 SAVE 24%
coming soon $62.58
FORTHCOMING
TC Electronic TC8210-DT Reverb Plug-in with Dedicated Hardware Controller
Cat: 781357
 
Reverb plug-in
Notes: Classic Mixing Reverb Plug-in with Dedicated Hardware Controller

Sound:
Sample rates: 44.1, 48, 88.2, 96, 176.4, 192 kHz

Software Support:
Operating systems: Mac OS X 10.13 Sierra or above, Windows 7 or above
Drivers: No additional drivers required, uses standard USB HID drivers
Plugin formats: AAX-native, Audio Units, VST2.4, VST3. 64 bit

USB Connection (DT version)
Type: USB 2.0, type micro-B

Power (DT version)
Power supply: USB bus powered
Power consumption: Max. 2.5 W

Physical (DT version)
Dimensions (HxWxD): 42 x 54 x 135 mm (1.7 x 2.1 x 5.3")
Weight: 0.22 kg (0.48 lbs)
Read more
coming soon $99.26
FORTHCOMING
SynthRotek Arcadian Rhythms Module (black faceplate, blue buttons) (fully assembled)
Notes: Arcadian Rhythms is an arcade button module that can be used to trigger drums, envelopes and other events in a Eurorack system. When the buttons are pressed, they light up and send a gate. As long as a button is held down, the gate remains high.

Mix and match your LED buttons! The brightness between colors will vary slightly, but the trimmers on the back of the module will adjust the LED brightness so the three buttons match. Reducing the brightness will also reduce the current draw (each button draws 41mA at full brightness).

Choose red, blue, green, yellow or white buttons.

Specifications:
Module width: 35mm
Module depth: 6HP
Current draw: +12V: 123mA max (41mA per button)
Read more
MRP:$68.62 SAVE 18%
coming soon $56.10
FORTHCOMING
Sound Study Modular Kontact MIC Module (fully assembled)
Notes: The Kontact MIC is a lo-fi theme park. It's a Eurorack microphone preamp with a piezo contact mic built into the panel.

The creative applications are endless: finger percussion/rubbing/scratching, guitar input (works surprisingly well with just a little lofi crunch), acoustic sources to CV, etc.

The PCB fibreglass has quite a nice rough texture - rubbing it with a finger or a plectrum creates quite a wide range of sounds. The back of the panel is plated to expand the surface area of the contact mic. The mic will also pick up all the physical sounds in your modular- patching, cables rustling, switches, fingers on knobs - without picking up airborne sounds i.e. the sound your modular is making. At very high sound levels will pick up vibrations from the speaker output and start to feedback.

The module will work with both DIYed contact mics made from inexpensive piezo transducers, off the shelf contact mics (often called Piezo Pickups) made for guitars and violins which you can pick up for ten bucks from Amazon or eBay or more bespoke mics like the popular Jez Riley French models (including hydrophones!) which are firmly aimed at Sound Designers.

It is an easy way to bring environmental noise and feedback into a modular system, inspired by the early days of electroacoustic music in Paris and Cologne, and by the contact microphone and phonograph cartridge experiments of John Cage, Gordon Mumma, Robert Ashley and Nicholas Collins.

Read more
MRP:$54.38
coming soon $51.78
FORTHCOMING
SynthRotek Atari Punk Console Eurorack Module (black faceplate) (fully assembled)
Notes: Here is the Atari Punk Console in Eurorack form! Originally designed by DIY electronics guru Forrest Mims III as the iStepped Tone Generator, the Atari Punk Console is one of the most famous and recognizable Lo-Fi synth circuits ever. Using a single 556 dual timer IC with minimal part count, the Atari Punk Console circuit is a solid, time-tested noise generator capable of outrageous square wave madness!

Control Voltage (CV) input allows step sequencers and waveform generators to expand the sonic capabilities of the Atari Punk Console from drone to arpeggio-like dynamism. Use any variable voltage source from 0-Supply Voltage for some glitchy goodness! The APC modular version has two CV inputs that modulate the two square wave internal oscillators.
Read more
MRP:$80.28 SAVE 18%
coming soon $65.81
FORTHCOMING
Doepfer A-118-2V Noise & Random Slim Line Vintage Edition Module
Cat: 790467 Rel: 31 Dec 20
 
Signal generator module
Notes: Module A-118-2 generates the signals white noise, colored noise, continuous random voltage and stepped random voltage.

The noise signal is generated 100% analog by amplification of the noise of a transistor. White and colored noise are usually used as audio sources. The random voltages are normally used as control voltages (e.g. for filter frequency or any other voltage controlled parameter).

The A-118-2 gives you the ability to mix the relative amounts of Red and Blue noise (low/high frequency component) in the colored noise output.

For the continuous random voltage the rate of change (Rate) and amplitude (Level) of the random voltage can be adjusted. The continuous random voltage is used as source for the S&H/T&H unit. The type of operation can be set to S&H (sample and hold) or T&H (track and hold). When T&H is chosen the output signal follows the input signal as long as the Clock input is "high". As soon as the clock signal changes to "low" the last voltage is stored. When S&H is chosen the input signal is sampled at the rising edge of the Clock signal. For the Clock signal a "digital" signal (e.g. Clock, Gate, rectangle output of an LFO) is required. Dual color LEDs are used to indicates the continuous and stepped random voltages.

Controls:
Blue: share of the high frequencies in the the colored noise output
Red: share of the low frequencies in the the colored noise output
Rate: rate of change of the continuous random voltage
Level: amplitude of the continuous random voltage
TH/SH: switches between T&H und S&H

Inputs and outputs:
RND: continuous random voltage output (with LED display)
TH/SH: stepped random voltage output (with LED display)
Clk: Clock input of the S&H/T&H unit
C Noise: colored noise output
W Noise: white noise output

Important notes:
After power on it takes a few minutes until the two noise signals and the random signals are generated. The module is not faulty when after power on the signals do not appear immediately!

The S&H/T&H function is realized by pure analog circuitry (electronic switch followed by a holding capacitor and buffer). Consequently the output voltage drifts a bit in the holding state because the capacitor is discharged by parasitic resistors. The drift depends also upon environmental conditions like humidity or temperature.

The level of the random voltage changes with the settings of the Blue and Red controls. Especially the Red control affects the random voltage level (which is derived by low pass filtering from the colored noise signal) because the Red control changes the share of the low frequencies in the colored noise signal. The effect of the Blue control is much smaller because it changes the share of the high frequencies in the colored noise signal which are filtered out by the low pass of the random circuitry.

Power consumption: 20mA at +12V and 20mA at -12V
Depth: 40mm
HP : 4
Read more
MRP:$103.58 SAVE 17%
coming soon $86.31
FORTHCOMING
Reloop sPodcaster Go Professional USB Podcast Microphone
Cat: 783826 Rel: 31 Dec 20
 
USB podcast microphone
Notes: Quality and flexibility are more important than ever for musicians and podcasters nowadays. The professional USB condenser microphone continues the successful sPodcaster series in an outstanding retro design and is built in a portable and slim aluminium housing.

Both the dubbing of musical instruments and the recording of speech and vocals, whether on the road or in project studios, are recorded in studio quality with high-quality A/D converters, thanks to the integrated audio interface (class compliant). Thanks to the advantageous cardioid polar pattern, the system is directed towards a sound source, so that ambient noise and feedback are largely cancelled out.

The 3.5 mm jack connector on the back panel allows you to connect headphones or speakers to listen instantly to the recording. All of the computer's audio output is thus played back via the sPodcaster Go's audio interface and can be comfortably adjusted using the volume buttons. A USB connection between PC or Mac is plug 'n' play without any additional driver installation and also supplies the microphone with power.

The tabletop stand, pre-mounted on the underside of the microphone, folds completely to transport the sPodcaster Go in a space-saving manner. Alternatively, the table stand can be unscrewed to allow attachment to a conventional stand with M10 threads. The sPodcaster Go's rugged construction makes it well-prepared for the daily challenges of mobile use.

The Reloop sPodcaster Go includes a matching USB cable and a functional carrying bag.

Professional USB condenser microphone for portable podcasting
Perfect for recording on the go and smaller studio environments
Integrated USB audio interface (class compliant)

Technical Data
Voltage: USB feed, 5.0 V
Sensibility: -65 i5 dB @ 1 kHz
S/N ratio: -59 dB
Frequency range: 50 Hz - 18 kHz
Plug&Play compatible with Windows Vista, XP, 8 and Mac OS X
Connection: USB
Dimensions: 148 x 65 x 56 mm
Weight: 350 g
Incl. USB cord, table stand and software
Read more
MRP:$71.21 SAVE 17%
coming soon $59.34
FORTHCOMING
Miditech i2-Control 37 Black Edition USB MIDI Masterkeyboard
Cat: 784356 Rel: 10 Oct 20
 
USB MIDI masterkeyboard
Notes: The i2-Control 37 black edition is the big brother of the i2-Control 25 black. With additional keys, in total 37, and 9 faders it gives you more functionality. Full USB powered and class compliant, works the i2-Control 37 with each Windows and Mac OSX, which supports class compliant devices.

With an optional power adaptor the i2-Control 37 black works perfect with each MIDI device.

Class compliant: Works driverless with Mac OS/X, Apple iOS 4.2, Windows XP SP2, Windows Vista, Windows 7, Windows 8 and Windows 10

Inclusive: free Miditech software bundle (download versions): Toontrack EZ Drummer lite, Magix Samplitude Silver, Makemusic Finale Notepad, Ik Multimedias Amplitube CS and Imagelines Poizone Synthesizer
Read more
MRP:$135.95 SAVE 29%
coming soon $97.10
FORTHCOMING
Empress Effects Midibox2 MIDI Pedal Controller
Cat: 783064 Rel: 30 Sep 20
 
MIDI pedal controller
Notes: The Midibox2 allows you to connect Empress Pedals equipped with a control port to MIDI. It converts the standard 5 pin MIDI cable to a simple guitar patch cable.

Specifications:
Power Input Voltage: 9V DC
Power Input Connector: 2.1mm barrel connector (Negative tip)
Power Consumption: ~ 30mA
Enclosure Material: Die Cast Aluminum
Input connector: Standard 5 pin MIDI connector
Output connector: 1/4" Jack
Height: 1.25"
Length: 4.5"
Width: 2.5"
Weight: 0.5 lb
Read more
MRP:$116.53 SAVE 17%
coming soon $97.10
FORTHCOMING
TC Electronic Spectracomp Bass Compressor Pedal
Cat: 781360
 
Bass compressor pedal
Notes: SPECTRACOMP BASS COMPRESSOR is the tiniest big thing to hit the world of bass in a long time. This ultra-compact and highly intuitive multiband compressor, is made to bring out all of the glorious low-end punch and presence of your beloved bass in the most transparent and musical way you've ever heard. Just turn it on and take charge of the groove.

Studio-quality multiband compressor - perfectly tuned for bass
TonePrint enabled
Ultra-small footprint

The magic of multiband bass compression was first introduced in TC's innovative RH-series bass amps, which made dialing in super-smooth compression an absolute breeze. With SPECTRACOMP BASS COMPRESSOR the simplistic one-knob approach from the amps was kept, while greatly improving the compression algorithm. This gives you access to studio-quality compression tones, in a stompbox so small that you can't afford not to have it on your board.

SPECTRACOMP BASS COMPRESSOR contains the same high-quality MD3 dynamics engine known from TC's studio production powerhouse, System 6000. A dynamics engine that has been used on countless hit-records and massive blockbuster movie productions. This advanced algorithm applies perfectly tweaked compression for your high, mid and low frequencies to create a more unified and balanced sound where your low strings never overtake your highs, something that's simply not possible with the one-size-fits-all compression known from a typical stompbox. This way you'll get a tight and punchy attack, with endless sustain all without ever compromising the natural low-end response of your bass.

Picture SPECTRACOMP BASS COMPRESSOR as an ice cream. It's smooth, delicious and easy to love. But maybe you want to super-pimp your ice cream with cherries, chocolate sauce and sprinkles shaped like unicorns? You want to make that tone-sundae your own. This is where TonePrint comes into play. Via the free editor you can customize your own compression tone through a wealth of deep editing parameters, so it suits your rig perfectly. You can also try on custom pre-made tones via the free app for Android and iOS. Tone tweaking just leveled up.
Read more
coming soon $73.36
FORTHCOMING
SynthRotek 1U Mattson Buffered Multiple Module (black faceplate)
Cat: 777875
 
buffered multiple module
Notes: The 1U Mattson Buffered Multiple is a PRECISION buffered mult that is perfect for 1V/O CV sources. A signal plugged into INPUT A will be available from all 8 OUTPUTS. Break the chain by adding a second signal into INPUT B; signal A comes out the 4 "A" outputs and signal B is available at the 4 "B" outputs.

Please note: Synthrotek's 1U products do not fit in Vermona or Intellijel cases.

Current draw: +12 18mA, -12 18mA
Width: 20HP
Depth: 32mm


Read more
MRP:$99.70 SAVE 19%
coming soon $80.91
FORTHCOMING
SynthRotek 1U UniBuffer Module (black faceplate)
Cat: 777891
 
buffer/gain mixer module
Notes: The 1U UniBuffer combines a buff mult and a unity gain mixer into a 1U module. It's great for small cases where you want both functions available (like the Power Lunch).

The Buffered Multiple is a PRECISION buffered mult that is perfect for for 1V/O CV sources. The 1U Unity Gain Mixer adds input signals together and combines them for a summed output.

Current draw:
+12V: 14mA
-12V: 13mA
Module Depth: 20mm
Width: 20HP
Polarity protected
Read more
MRP:$99.70 SAVE 19%
coming soon $80.91
FORTHCOMING
SynthRotek 1U Stereo Output Mixer Module (black faceplate)
Cat: 777888
 
stereo output mixer module
Notes: The 1U Stereo Mixer is intended for pannable stereo output, but it is also suitable for both DC (Gates, Triggers and Control Voltage) & AC (audio) signals.

Specifications:
Current draw: +12: 13mA, -12: 9.2mA
Depth: 32mm
Width: 24HP
Please note: Synthrotek's 1U products do not fit in Vermona or Intellijel cases.
Read more
MRP:$93.23 SAVE 19%
coming soon $75.53
FORTHCOMING
Rat King Modular Random Sequencer Module (fully assembled)
Notes: The Random Sequencer generates quantized random or 8 or 16 step randomly generated sequences, which is great for quickly (and musically) starting a patch, augmenting a patch, and performing live! It generates quantized voltages between 0 and +4V. In the sequencer modes, the module repeats the last 8 or 16 randomly generated steps as a sequence. In addition to being used as a random module, it also doubles as a master clock generator, ranging from 8ms to 50 seconds.

Specifications:
Random voltage generator range: 0 to +4V
Clock speed: 8ms to 50 seconds
Module width: 4HP
Module depth: 21mm
Power consumption:
+12V: 20mA
-12V: 0mA
Read more
MRP:$93.23 SAVE 19%
coming soon $75.53
FORTHCOMING
Eurorack Hardware Modules RING Dual Ring Modulator (black faceplate) (fully assembled)
Notes: RING is a 4HP dual passive ring modulator for Eurorack. Ring modulation is an essential 'effect' in modular synthesis. You get two independent channels of the classic two-transformer, four-germanium analog design. Matte black panel with white ink.
Read more
MRP:$86.75 SAVE 19%
coming soon $70.13
FORTHCOMING
MST Stereo Output Mixer Module (fully assembled)
MST
Cat: 778059
 
stereo output module
Notes: The MST Stereo Mixer is intended for pannable stereo output, but it is also suitable for both AC & DC voltage signals (Gates, Triggers and Control Voltage).

Specifications:
Current draw: +12: 13mA, -12 9.2mA
Width: 6HP
Read more
MRP:$106.17 SAVE 20%
coming soon $85.24
FORTHCOMING
Sound Study MIDI 2 CV Eurorack Module (fully assembled)
Cat: 778125
 
MIDI to CV module
Notes: The Sound Study Modular Midi 2 CV is a 4hp USB MIDI to CV and Gate converter. It has a bunch of different modes that it can operate on, like monophonic, duo monophonic, and many more!

Read more
MRP:$106.17 SAVE 20%
coming soon $85.24
FORTHCOMING
SynthRotek DIRT Filter Module (black faceplate) (fully assembled)
Cat: 778171
 
low-pass filter module
Notes: DIRT is our new 4HP low-pass filter / effect for the Eurorack modular synth platform.

The DIRT is an unapologetic filter / effect that produces interesting and unique effects via the Bias knob, accessible from the front panel.

It's not a traditional filter; it's an effects module with filtering, ring mod effects, wave shaping and even outright brutal harmonic distortion.

DIRT likes to square things up a bit, so throw in a triangle, sawtooth, sine or other wave forms for different style effects. Even plugging a guitar (using an external amplification module) into the DIRT produces some great sounds and heavy distortion.

Controls:

- CUTOFF = Cutoff Frequency

- RESONANCE = Increase the Q!

- BIAS = Set the bias correctly or not, the choice is yours


Inputs/Outputs:

- Version 2.2, which as a buffered CV input jack. CUTOFF CV IN = Voltage range changes depending on where CUTOFF knob is positioned. External attenuation will be needed for fine modulation.

- AUDIO IN = Audio Input

- AUDIO OUT = Audio Output

Other info:

- PCB Dimensions: 4 x 1.5 inches

- 4HP

- Power consumption: >1mA
Read more
MRP:$80.28 SAVE 18%
coming soon $65.81
FORTHCOMING
SynthRotek 1U Unity Gain Mixer Module (black faceplate)
Cat: 777893
 
mixer module
Notes: The 1U Unity Gain Mixer adds input signals together and combines them for a summed output. For example, if you put in a 1V source and a 3V source, the output will be 4V. It's mainly used for CV, but it can be used to combine audio signals together.

A unity gain mixer is handy in several ways:
Combining gates and triggers. Plug a few sequencer steps into the unity gain inputs, then run the output to a drum synth, VCA, envelope, etc.
Re-shaping two CV sources with a single envelope
Combining different wave shapes or LFOs to make crazy sounds.
Controlling the CV of one source with the CV of another source. Just plug the CV out of a sequencer into and an expression pedal/touchable CV out into the unity gain inputs.

Specifications:
Current draw:
18 mA +12V
18 mA -12V
0 mA 5V
Depth: 32 mm
Width: 20HP

Please note: Synthrotek's 1U products do not fit in Vermona or Intellijel cases.
Read more
MRP:$86.75 SAVE 19%
coming soon $70.13
FORTHCOMING
Decksaver Dave Smith Instruments Sequential Prophet Rev-2 Desktop Synthesiser Cover
Cat: 791926 Rel: 31 Dec 20
 
Synthesiser cover for Dave Smith Instruments Sequential Prophet Rev-2
Notes: Dust, liquid and accidental impact have taken many a good analogue synth down over the years - this is where Decksaver steps in. Precision trimmed for a perfect fit whilst accommodating cables, the Prophet Rev-2 can sit ready for operation. The Prophet Rev 2 cover features Soft-Fit technology, providing extra protection to vulnerable wooden cheek panels that often adorn synthesizers. Slides straight into a flight or soft case for maximum protection during transportation. Shields delicate controls and internal components from damage at home, on the road and on stage.

Material: Polycarbonate
Colour: Smoked clear
Size (L x W x H): 54 × 20.6 × 3.7 cm
Weight: 0.84 kg
Read more
MRP:$120.42 SAVE 31%
coming soon $83.07
FORTHCOMING
Doepfer A-119V External Input & Envelope Follower Vintage Edition Module
Cat: 790461 Rel: 31 Dec 20
 
External input & envlope follower module
Notes: Module A-119 (External Input / Envelope Follower) is designed to allow external audio signals to be integrated into the System A-100. It comprises a pre-amp, envelope follower, and comparator.

The pre-amp has two inputs: an unbalanced input for line level signals, with a gain factor of from 0 to 20, and a balanced input with a gain factor of from 0 to 500, for insertion of low level signals, for instance from a microphone or electric guitar. The Envelope Follower reads the signal level of the input, and puts out a proportional voltage as an envelope at its own output. The comparator generates a gate signal whenever the input goes above an adjustable trigger threshold. Three LEDs help you keep track of overload, the envelope, and the gate signal.

Power consumption: 30mA at +12V and 20mA at -12V
Depth: 45mm
HP : 8

The module was designed primarily to derive an envelope and gate signal from the incoming audio signal. The built-in preamp is not "high-end" and shows - depending upon the position of the gain control - a reduction of higher frequencies in the frequency response. It is possible to improve the frequency response by replacing IC1 (the upper of the two integrated circuits) by a more sophisticated circuit. For example the LME49740 can be used. It's no longer in production but available e.g. via Ebay.

Apart from this an incoming audio signal with sufficient level can be patched directly to the audio input of A-100 modules (e.g. filters), i.e. without the detour via the A-119. In this case the A-119 functions only as envelope and gate generator and the audio output of the A-119 remains unused.
Read more
MRP:$91.93 SAVE 17%
coming soon $76.60
FORTHCOMING
Presonus Studio One 5 Artist Software (boxed)
Cat: 786900 Rel: 28 Sep 20
 
Music software
Notes: Studio One Artist provides everything you need to create your own music and podcasts as intuitively as possible, and does it all with a single-window, drag-and-drop workflow that will make you wonder why you put up with other software that isn't designed the same way. You'll supercharge your creativity thanks to unlimited tracks and buses and a complete suite of virtual instruments and native effects. And if that's not enoughifor the first time ever, now Studio One Artist supports third-party VSTs, so you can bring your existing instrument and effects collection into Studio One Artist. And we've made them even easier to use, thanks to new advanced Key Switch support.

Studio One is designed to keep you in the creative flow by providing powerful tools that never get in your way. Robust virtual instruments like Mai Tai, Mojito, Impact XT and Presence XT are included for deep synth, rhythm, and instrument sample playback, respectivelyiand the included Native Effects sound just as good (and frequently, better) as third-party effects solutions.

Guitarists will love the new third-generation Ampire tech that has the most realistic amp and cabinet (and stompbox!) simulations we've ever made. Fans of EDM and hip-hop will appreciate Studio One's Pattern Editor, which allows for intuitive drum and melody composition via a familiar drum-machine inspired UI, which might be just about the most fun and rewarding music-creation technique out there.

The standard for end-to-end production, only Studio One 5 seamlessly moves with you from initial inspiration to full production, final mix to digital release... and lets you truly create without boundaries.
Read more
coming soon $84.15
FORTHCOMING
Miditech USB MIDI Host
Miditech USB MIDI Host (USB MIDI host)
Cat: 784446 Rel: 10 Oct 20
 
USB MIDI host
Notes: The USB MIDI Host is a simple, but very useful MIDI Tool to convert MIDI data from an class compliant USB MIDI device to a normal MIDI device with the 5pin DIN MIDI port. The power comes from a standard USB DC power adaptor, which is optional.

The usage is very simple: Just connect your USB drum trigger pad, USB controller or USB MIDI keyboard to the USB MIDI host. It will get power from the USB MIDI host device and convert all incoming USB MIDI data and transmit it to DIN MIDI port. The will work with the most class compliant USB MIDI devices, which needs no driver to work.

The USB DC power adaptor is optional.
Read more
MRP:$102.29 SAVE 22%
coming soon $79.84
FORTHCOMING
Miditech MIDI 4Merge / Filter MIDI Merger & MIDI Filter
Cat: 784440 Rel: 10 Oct 20
 
MIDI merger
Notes: 4 in 1 MIDI merger in a black aluminium cabinet. This product merges the incoming MIDI data of maximum four MIDI keyboards into one DIN MIDI out. Power supply is an optional normal DC USB power adaptor.
Read more
MRP:$86.75 SAVE 30%
coming soon $60.42
FORTHCOMING
Miditech Audiolink III USB Audio Interface With Steinberg Cubase LE8
Cat: 784460 Rel: 10 Oct 20
 
USB audio interface
Notes: USB Audio-Interface for all cases: With two build-in Microphone-Preamps with Phantom Power and a complete 16 Bit/48 kHz Stereo Instrument/Line Interface this class compliant USB Audio Interface is very easy to use. Fully USB powered, with fast Windows ASIO drivers and adjustable headphone output the Audiolink III gives you all the recording possibilities you will ever need. New: The two XLR/TRS combo inputs on the front side.

Works driverless with Mac OS/X, Windows XP SP2, Windows Vista, Windows 7, 8 and Windows 10

ASIO driver for Windows XP/Vista/Win7/Win8 and Windows 10 for download available

Inclusive: free Miditech software bundle (download versions): Toontrack EZ Mix 2 lite, Magix Samplitude Pro X2 Silver, Makemusic Finale Notepad, Ik Multimedias Amplitube CS, Magix Independence free, Waldorf Edition LE and Imagelines Poizone Synthesizer
Read more
MRP:$102.29 SAVE 38%
coming soon $63.67
FORTHCOMING
SynthRotek Power Pak Module (black faceplate) (fully assembled)
Notes: The Synthrotek Power Pak converts the power in your Eurorack case to 9V, 12v, and 5V USB. You can easily power guitar pedals, drum machines, controllers, USB lights, charge smart phones, and other devices without having to lug around bulky power bricks. Just plug a male-male connector cable (2 included!), daisy-chain cable or USB cable into the Power Pak, and you're good to go.

Need to add +5V to your existing power supply? By installing one jumper, the Power Pak allows you to add +5V to your power distribution board or bus cable. This can be used to power Eurorack modules that need +5V.

Keep it simple and tidy with the Synthrotek Power Pak!

Specifications:
750mA limit on 9v and 12v barrel jacks
1000mA limit on 5v USB jacks
DC jack size: 5.5 x 2.1mm
Width: 4HP
Depth: 30mm
Read more
MRP:$106.17 SAVE 19%
coming soon $86.31
FORTHCOMING
SynthRotek Sound Study MIDI 2 CV Console Version
Cat: 778343
 
MIDI to CV module
Notes: The Sound Study Modular Midi 2 CV is a 4hp USB MIDI to CV and Gate converter. It has a bunch of different modes that it can operate on, like monophonic, duo monophonic, and many more!

Compatibility:
The Midi 2 CV is class-compliant but uses an unusual USB setting (1ms poll-rate in low-speed mode) not well supported on Windows.

Optimal latency is obtained with OS X >= 10.6.3 ; iOS ; or Linux >= 2.6.

On other systems, the Midi 2 CV will work but messages will be delayed by up to 8ms.

Conversion modes:
Monophonic with velocity
Monophonic with velocity and square oscillator
Dual monophonic
Duophonic
CC conversion
Monophonic with CC
Quad triggers
Quad gates
Monophonic CVCVpalpalwith MIDI clock output
Technical characteristics
Range and standards:

CV outputs: 0 to 4V, V/Oct (4 octaves).
Gate outputs: Positive V-trig, ON = 5V ; OFF = 0V.
Performance:

Resolution: < 2mV.
8 points calibration curve for non-linearity compensation.
Temperature dependency: +/- 2 cents within the 10- C to 80- C range.
Output impedance: 220O (rule of thumb: 2 cents drop per connection to a CV input).
Power supply:

USB-bus powered, current draw < 20mA.
Read more
MRP:$106.17 SAVE 19%
coming soon $86.31
FORTHCOMING
MST Ribbon Controller Module (fully assembled)
MST
Cat: 778058
 
controller module
Notes: The MST Ribbon module brings control to a whole new surface and fills out an already generous selection of modules designed by George Mattson. The Ribbon module pairs with Synthrotek's Ribbon Controller Touch Interface modules that are available in various lengths in both 3U and 1U formats. Control Voltage, Gate and Pulse outputs allow for mega control over pitch, modulation, quantization, volume and more! Also connect your external signal into the EXT SIG IN jack to bypass the modules on-board voltage for passive external attenuation.

Current Draw:
+12v: 8mA
-12v: 15mA
+5v: N/A

Comes With:
Keyed Power Cable.
2.5mm and 3mm rack screws.
Super cool sticker.

Read more
MRP:$80.28 SAVE 18%
coming soon $65.81
FORTHCOMING
MST Unity Gain Mixer Module (fully assembled)
MST
Cat: 778060
 
gain mixer module
Notes: The MST Unity Gain Mixer adds input signals together and combines them for a summed output. For example, if you put in a 1V source and a 3V source, the output will be 4V. It's mainly used for CV, but it can also be used to combine audio signals together.

A unity gain mixer is handy in several ways:
Combining gates and triggers. Plug a few sequencer steps into the unity gain inputs, then run the output to a drum synth, VCA, envelope, etc.
Re-shaping two CV sources with a single envelope.
Combining different wave shapes or LFOs to make crazy sounds.
Controlling the CV of one source with the CV of another source. Just plug the CV out of a sequencer into and an expression pedal/touchable CV out into the unity gain inputs.

Specifications:
Current draw:
+12V: 9mA
-12V: 9mA
Module Depth: 22mm
Width: 6HP
Read more
MRP:$106.17 SAVE 20%
coming soon $85.24
FORTHCOMING
SynthRotek MIXIV 4 Channel Mixer Module (black faceplate) (fully assembled)
Notes: The MIXIV (mix 4) is a four-channel mixer in 4HP, fully built and ready to patch! Channels 1 & 2 can have their own output when a cable is patched in to the sub-output jack. When the left-hand OUT jack is not patched, all channels come out of the right-hand OUT jack. Mix CV or Audio simply and with slider precision! Very skiff friendly at only 26mm deep!

Specifications:
Module width: 4HP
Module depth: 26mm
Current Draw:
+12V: 15mA
-12V: 10mA
Read more
MRP:$86.75 SAVE 19%
coming soon $70.13
FORTHCOMING
SynthRotek 4093 CHAOS NAND Synth Eurorack Module (black faceplate) (fully assembled)
Cat: 778157
 
eurorack noise generator module
Notes: The 4093 Chaos NAND Synth, in Eurorack form! The 4093 Chaos NAND Synth is a super-modifiable noise generator that will knock your socks off with its sonic potential: low pulsing drones, random robotic chaos, and high-pitched laser sounds!

A great project to begin your explorations into the world of DIY sound synthesis, the PCB was designed with the beginner in mind. Board-mountable switches, socketed IC, hands-on knobs and switches for tone control, and a detailed silkscreen PCB to help you solder components right the first time.
Read more
MRP:$117.83 SAVE 19%
coming soon $96.02
Items 1 to 42 of 42 on page 1 of 1

Filter

Coming Soon: Studio Equipment
Close