Juno Daily

Music and tech news, interviews, features, reviews and more.

Visit Juno Daily

安全购物

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

安全购物

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.  Visit Juno DJ

Coming Soon: Studio Equipment

首页  Coming Soon  

Studio Equipment

Options
Items 1 to 33 of 33 on page 1 of 1
FORTHCOMING
Behringer 110 VCO/VCF/VCA Module
Cat: 799848
 
VCO/VCF/VCA Module
Notes: Legendary Analog VCO/VCF/VCA Module for Eurorack

The 80s was the golden age of electronic music. Synthesizers were at their prime and almost every hit song and movie soundtrack at that time had a synth in one form or another. Modular synths have become more and more popular with professionals and enthusiasts over the years and they're about to get even better.

This is the Behringer System 100 110 VCO/VCF/VCA Module. An authentic reproduction of the original "System 100M" circuitry from the 80s that can fit in a standard Eurorack case. The best part? It's at a very affordable price. Mix the 110 in with your existing rig or start your modular synth journey from here. Either way you're sure to have a lot of fun!

The 110 comes with a complete synth voice with an internally patched signal flow for ease of use and to save patching time so you can focus on your music. You can vary the VCO section by selecting one of three waveforms; triangle, ramp and Pulse Width Modulation which can be adjusted by the Mod Manual knob. The VCO also offers pitch and range control knobs as well as one audio output, which can be routed to another source, and two CV inputs.

The VCF features cutoff frequency and resonance sliders while the VCA comes with two audio outputs (low/high). Both the VCF and VCA each feature two audio inputs and two CV inputs that allow for other sources to be plugged into the 110, making it a must-have in any modular synth.

Installing the 110 VCO/VCF/VCA is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and mount the module using the included screws. This allows for the 110 VCO/VCF/VCA to be mixed with other synth modules for a truly unique set up.

Whether you're just getting into modular synths or looking to complete your collection, the 110 VCO/VCF/VCA module from Behringer is a great tool to have when creating amazing music.

Specification:

Inputs
Pulse width mod
Type
3.5 mm TS jack, DC coupled

Impedance
>70 kO, unbalanced

Maximum input level
0 V to +10 V, 4% per volt

Signal input
Type
Impedance
>50 kO, unbalanced

Max input level
+17 dBu @ unity gain

VCO mod input
Type
2 x 3.5 mm TS jacks, summed

Impedance
>50 kO, unbalanced

CV range
0 V to +10 V, 1 V/oct

VCF mod input
Type
2 x 3.5 mm TS jacks, summed

Impedance
>50 kO, unbalanced

CV range
0 V to +10 V, 1 V/oct

VCA mod input
Type
2 x 3.5 mm TS jacks, summed

Impedance
>50 kO, unbalanced

CV range
0 V to +10 V, typically 1 V per 10 dB

Outputs
VCO output
Type
3.5 mm TS jack, DC coupled

Impedance
1 kO, unbalanced

Max output level
10 V p-p

Frequency range with no external CV
<10 Hz to 500 Hz

Frequency range using external CV
<1 Hz to 30 kHz

VCA output
Type
2 x 3.5 mm TS jacks, AC coupled

High impedance
1 kO, unbalanced

Low impedance
3 kO, unbalanced

High max output leve
+18 dBu

Low max output level
-2 dBu

High output noise
<-60 dBu, 22 Hz -22 kHz

Low output noise
<-80 dBu, 22 Hz -22 kHz

Controls
Pulse width manua
50% to min

Waveform
Triangle, sawtooth, pulse

Range
32', 16', 8', 4', 2'

Pitch
2 octave range

Cutoff frequency
20 Hz to 20 kHz

Resonance
Off to self oscillation

Sig in level
-8 to unity gain

Mod in level
-8 to unity gain

VCA initial gain
Power
Power supply
Eurorack

Current draw
80 mA (+12 V), 50 mA (-12 V)

Physical
Dimensions
81 x 129 x 46 mm (3.2 x 5.1 x 1.8")

Rack units
16 HP

Weight
0.19 kg (0.42 lbs)
Read more
coming soon $96.12
FORTHCOMING
Behringer Multimode Filter/Resonator Module 1047
Cat: 799853
 
Filter/resonator synth module
Notes: Legendary 2500 Series 12dB state variable filter module for Eurorack.

This is the Behringer 2500 series MULTIMODE FILTER/RESONATOR MODULE 1047. An authentic reproduction of the original "System 2500" circuitry from the 70's that can fit in a standard Eurorack case. The best part? It's at a very affordable price. Mix the MULTIMODE FILTER/RESONATOR MODULE 1047 in with your existing rig or start your modular synth journey from here. Either way you're sure to have a lot of fun.

The MULTIMODE FILTER/RESONATOR MODULE 1047 is a classic voltage controlled 12 dB per octave state variable filter, the filter is a matched transistor design for a vintage sound. The 1047 filter is equipped with a coarse and fine filter frequency controls, a resonance (Q) control which acts on all 4 filter outputs, a resonance limit switch prevents signal overload when high levels of resonance are used, the notch frequency/fc control allows the notch frequency to be adjusted up or down from fc as set by the frequency controls, 2 summed frequency CV attenuators and a resonance (Q) CV attenuator for maximum flexibility, the signal input is also equipped with an attenuator. All this gives you endless possibilities of filter curve shape to create the ultimate sound.

The 1047 gives you comprehensive connectivity, filter signal input, FCV 1 and FCV 2 inputs can be used for filter frequency control or modulation, the Q CV input allows modulation of Q and resonance. The independent low-pass, high-pass, band-pass and notch filter outputs are all available simultaneously to feed multiple filter signals to other modules.

Installing the MULTIMODE FILTER/RESONATOR MODULE 1047 is easy as it is designed to fit into a standard Eurorack case. Just connect the power cable to the power supply and screw in the module using the included screws. This allows for the 1047 to be mixed with other synth modules for a truly unique set up.



Read more
coming soon $97.27
FORTHCOMING
Behringer 305 EQ/Mixer/Output Synth Module
Cat: 799850
 
EQ/mixer/output synth module
Notes: Legendary Analog Parametric EQ, Mixer and Output Module for Eurorack.

This is the Behringer System 100 305 EQ/MIXER/OUTPUT Module. A parametric EQ, mixer/oscillator and headphone amp combo that's an authentic reproduction of the original "System 100M" circuitry from the 80s that can fit in a standard Eurorack case. The best part? It's at a very affordable price! Mix the 305 in with your existing rig or start your modular synth journey from here. Either way you're sure to have a lot of fun!

The 305 allows for maximum tone shaping with its 4-channel EQ section complete with level, bandwidth and frequency controls that span a wide frequency spectrum from 20 Hz all the way up to 20 kHz. Using the two outputs of this section, you can then patch signals to two different modules for some extra modulation and waveform sculpting possibilities and even switch between EQ'd and Bypass modes for a quick comparison.

For added mixing capabilities, you can use the 305's 4-input mixer with individual pan and level controls. The output signal can be in either mono or stereo via 3.5mm and 14" jacks. Monitor your overall signal though the independent headphone output and its included level control.

Installing the 305 EQ/MIXER/OUTPUT is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and mount the module using the included screws. This allows for the 305 EQ/MIXER/OUTPUT to be mixed with other synth modules for a truly unique set up.




Read more
coming soon $96.12
FORTHCOMING
Jensen JTA-315 Dual Receive/Transmit Bluetooth Wireless Turntable3 -Speed With Stereo Speakers & Headphone Jack (black)
Cat: 797738
 
Bluetooth wireless turntable with stereo speakers
Notes: Works as a stand alone music system or stream music from your phone to the systems speakers or from the turntable to your Bluetooth enabled speakers or headphones.
Read more
coming soon $96.12
FORTHCOMING
Tangible Waves AE Modular METER Multi-Functional Module
Cat: 807713 Rel: 31 Mar 21
 
Utility eurorack module
Notes: A multi-functional module for visualizing and measuring signals.

The METER module offers following modes:

Oscilloscope (AC or DC): visualizing audio and CV signals.

Spectrum analyzer: display the frequency spectrum of the input signal

Voltmeter: check the voltage of (mainly) CV signals

Frequency meter: see the frequency of the input signal; displayed as hertz and as musical note with +/- 100 cent difference. (The frequency of the root "A" can be adjusted)

Oscillator calibration helper: Via the MIDI output, this module can be used for calibrating the oscillators in the AE modular system.
Read more
MRP:$71.41 SAVE 17%
coming soon $59.51
FORTHCOMING
Behringer Dual Noise/Random Voltage Generator Module 1016
Cat: 799852
 
Dual noise/random voltage generator module
Notes: Legendary 2500 series dual noise source module for Eurorack.

This is the Behringer 2500 series DUAL NOISE/RANDOM VOLTAGE MODULE 1016. An authentic reproduction of the original "System 2500" circuitry from the 70's that can fit in a standard Eurorack case. The best part? It's at a very affordable price. Mix the DUAL NOISE/RANDOM VOLTAGE MODULE 1016 in with your existing rig or start your modular synth journey from here. Either way you're sure to have a lot of fun.

The DUAL NOISE/RANDOM VOLTAGE MODULE 1016 is a classic discrete transistor white/pink/random noise source with independent attenuators for the white/pink noise level, a white /pink selector switch with color coded LED's. The slow random voltage generator produces random CV voltages and the maximum level can be controlled via the attenuators as well as an on/off switch with LED indicators for each channel. The 2 channels are completely independent of each other for even more creative possibilities.

The 1016 gives you comprehensive connectivity, each channel has a separate white/pink noise output and separate outputs for the random voltages, the outputs are all available simultaneously to feed multiple noise and CV signals to other modules.

Installing the DUAL NOISE/RANDOM VOLTAGE MODULE 1016 is easy as it is designed to fit into a standard Eurorack case. Just connect the power cable to the power supply and screw in the module using the included screws. This allows for the 1016 to be mixed with other synth modules for a truly unique set up.

Specification:

Outputs
Noise
Type
2 x 3.5 mm TS jacks, DC coupled

Impedance
1 kO, unbalanced

Max output level
i5 V

Random
Type
2 x 3.5 mm TS jacks, DC coupled

Impedance
1 kO, unbalanced

Max output level
i5 V

Controls
Noise
Attenuates noise generator output

Random
Attenuates voltage output

White/pink/of
Selects white or pink noise, or of

Random on/of
Engages or disengages voltage generator

Power
Power supply
Eurorack

Current draw
45 mA (+12 V), 15 mA (-12 V)

Physical
Dimensions
42 x 71 x 129 mm (1.7 x 2.8 x 5.1")

Rack units
14 HP

Weight
0.13 kg (0.29 lbs)

Read more
coming soon $97.27
FORTHCOMING
Tangible Waves AE Modular MIXCONSOLE Performance Mixer Module With CV Control
Cat: 807714 Rel: 31 Mar 21
 
Interface eurorack module
Notes: An extensible performance mixer with CV-control.

This module adds a main mixer to your AE modular system! It contains four channels; each channel has a level control, a left-right pan control and two FX send controls.

The stereo returns for the FX paths have individual level controls, and finally a master level control.

The channel levels can be controlled via CV inputs, if no CV is attached, the level knob works as usual volume control.

The inputs, FX sends/returns and master out are available as AE sockets; additionally, the FX sends/returns and master are also available as minijack sockets. FX returns are stereo (3.5 stereo minijack socket), master out is available as 2 separate mono minijack sockets and as one stereo socket.

With this module, you can integrate external effect units like guitar pedals and others into your AE modular system.
Read more
MRP:$109.86 SAVE 17%
coming soon $91.54
FORTHCOMING
Tangible Waves AE Modular PHASER Vactrol Phaser Module With 4/8 Stages
Cat: 807731 Rel: 31 Mar 21
 
Vactrol phaser module
Notes: A vactrol phaser with 4/8 stages.

The PHASER module runs the signal through a chain of all pass filters, which brings a very distinctive sound when the filter stages are modulated. Well known is this sound by many pieces of electronic music in the 70's and 80's; especially with the SOLINA as audio source you get this unique spacey sound known from these days.

The module is available with 4 or 8 stages; more stages make the modulation more deep and intense.

The module has a low-frequency LFO onboard, an external modulation CV can be used also as modulation source.
Read more
MRP:$71.41 SAVE 17%
coming soon $59.51
FORTHCOMING
Rides In The Storm Modules PEG Loopable ADSR & Envelope Generator Module
Cat: 805800 Rel: 01 Feb 21
 
ADSR/envelope generator module
Notes: Very exponential "snappy" course and rounded edges for a compressed "bonky" sound.

Two time zones are offered.

Rackspace: 6HP
Read more
coming soon $75.52
FORTHCOMING
Tangible Waves AE Modular MIXCONSOLE 3CH Channel Extender Module For MIXCONSOLE
Cat: 807715 Rel: 31 Mar 21
 
Interface eurorack module
Notes: Channel extender for MIXCONSOLE.

This module extends the MIXCONSOLE module with three additional channels; the channel level can be controlled via CV here, too. If no CV is attached, the level knob works as usual volume control.
Read more
MRP:$71.41 SAVE 17%
coming soon $59.51
FORTHCOMING
Tangible Waves AE Modular 2-Row 16x2 Standard Walnut Wood Case
Cat: 807735 Rel: 31 Mar 21
 
16x2 Eurorack case with wooden front and sides
Notes: This is a variant of the standard red/black racks for AE modular with wooden front and sides.

Same as with the standard cases, via a joint kit (not included) another case of this width (either one-row or two-row, standard or wooden type) can be attached at a free angle; the bus is connected via a short connector cable between both cases.

The sides, front and back are made of real-wood veneer covered MDF.
Read more
MRP:$65.92 SAVE 17%
coming soon $54.92
FORTHCOMING
Rides In The Storm Modules CON Quad Gain Converter Module
Cat: 805794 Rel: 01 Feb 21
 
Quad gain converter module
Notes: Two channels from line level to modular level and two channels from line level to modular level. Very low noise and low distortion circuit while preserving the transients.

Rackspace: 2HP
Read more
coming soon $75.52
FORTHCOMING
AniModule Line_Amp Module
AniModule Line_Amp Module (multiple / preamp / utility / dual stereo / external synth module)
Cat: 793793
 
Buffered multiple module
Notes: Check out AniModule's Line to Synth Level Converter.

2 Channels of 1 in <--> 2 Out.

Each channel is designed to multiply your input by *3 to boost your Line Gear / Tablet / Phone so you can integrate audio OR Control Voltages from your auxiliary systems.

Each channel's input is designed with Line Level gear's input impedance in mind.

Perfectly compatible with Synth Output Impedances, but the standard Synth Input Impedance is higher than Line level equipment is expecting.

Don't need to amplify your XPhone right this minute? Never fear! Just Hit the Switch!

This module won't sit unused in your cabinet breeding resentment and dust bunnies.

Hit the switch and that channel becomes a normal 2 HP Unity Gain Buffered Mult.

Only need one channel of each? It's YOUR Choice!
Read more
MRP:$113.98 SAVE 17%
coming soon $94.98
FORTHCOMING
Patching Panda Copycat Buffered Mult Module (with bicoloured LEDs)
Cat: 804381
 
Dual-buffered mult module
Notes: 2hp dual Buffered Mult features 2 channels of 3 outputs or 1 channel of 6 outputs if nothing is connected to the second input, it has 2 bi-colour led showing positive and negative voltage.

2hp buffered mult

DC coupled

2 inputs

Bi-colour led showing positive (green) and negative (red) voltages

Power consumption 20mA@+12V, 28mA@-12V

Skiff friendly

(This is not a precision buffered multi)
Read more
MRP:$97.50 SAVE 17%
coming soon $81.24
FORTHCOMING
Soma Laboratory Pulsar-23 Dust Cover
Cat: 809219 Rel: 30 Apr 21
 
Clear dust cover
Notes: Dust cover for Soma Laboratory Pulsar-23
Read more
coming soon $72.08
FORTHCOMING
ADDAC System ADDAC218 Attenuverters Module
Cat: 808226 Rel: 30 Apr 21
 
Attenuator/multiple/utility eurorack module
Notes: Another addition to ADDAC200's CV Utilities.

This module features 3 independent Attenuverters each with its input, output and 13mm knob.

White areas allow the user to write down what is connected to each channel.

Channel 1 is normalled to Channels 2 and 3.

40 mA +12V
40 mA -12V
0 mA 5V
25 mm deep
Read more
MRP:$116.73 SAVE 17%
coming soon $97.27
FORTHCOMING
AniModule AnVilope Module
AniModule AnVilope Module (clock generator / envelope generator / LFO synth module)
Cat: 794381
 
Envelope generator module
Notes: A Simple, Affordable, 4HP, Analog Envelope Generator.

Attack, Decay, Release... Simple.

- Envelope Out 0V to +7V
- Loop function so you can use it as a Variable Wave-Shape LFO / Timer
- Inverted out that goes from +7V to 0V

Function:
When the gate is High the envelope will rise and cycle through it's phases.
When gate goes low again the envelope will revert to the release phase.

If the Gate is longer than the ADR phases, the decay will play out then go to release and the envelope will end after the release.

Sprinkle them all over your system!

4HP Depth : 28mm
Read more
MRP:$118.10 SAVE 17%
coming soon $98.41
FORTHCOMING
Transient Modules u3A Three Channel Attenuverter Module
Transient Modules u3A Three Channel Attenuverter Module (attenuator/CV modulation/mixer/polariser/utility synth module)
Cat: 804254
 
3-channel attenuverter module
Notes: The u3A is a three channel attenuverter useful for scale, add offset, invert or sum signals. As each input is normalled to +5V, with nothing plugged into the jacks, each knob controls a voltage range from -5V to +5V. Each output is also summed to the adjacent channel on the right when no cable is connected.

Technical specifications:

18HP, Intellijel 1U size.

30 mm depth.

Consumption: 30mA +12V; 30mA -12V
Read more
MRP:$92.01 SAVE 17%
coming soon $76.67
FORTHCOMING
Tenderfoot Electronics Dupe 3x1 to 3 Buffered Multiple Module
Cat: 805882 Rel: 01 Feb 21
 
Buffered multiple module
Notes: Dupe is a triple 1-to-3 buffered multiple in 4HP.
Read more
MRP:$81.02 SAVE 24%
coming soon $61.78
FORTHCOMING
Rides In The Storm Modules QAM Quad Active Multiple Module
Cat: 805802 Rel: 01 Feb 21
 
Quad active multiple module
Notes: QAM Quad Active Multiple

One input on three outputs.

Usable for audio and CV signals, very distortion- and low noise circuit.

Power consumption: +/- 10mA

Rackspace: 4HP
Read more
coming soon $75.52
FORTHCOMING
Behringer DI4800A Professional 4-Channel Active DI-Box/Booster/Line Isolator
Notes: Professional 4-Channel active DI-Box, booster, and line isolator.

THE ULTRA-DI PRO DI4800A gives you 4 first-class DI channels in a single rack space. Each channel is equipped with one input (XLR or 14" TRS) and two XLR Outputs at the front and back to connect to your amp or monitor console allowing for 8 outputs in all. Plus, the DI4800A is designed to accommodate virtually any input signal, with a switchable output attenuation of -20 dB, while our highly acclaimed OT-1 output transformers ensure pristine and powerful output.

Direct Injection (DI) boxes make it possible to connect guitars, basses and keyboards (as well as other line-level devices) to audio mixers and recorders. The DI4800A takes the DI box to the next level by providing +6 dB and +12 dB gain switches for a total of +18 dB of gain boost perfect for amplifying low-level signals. The DI4800A also features a -20 dB attenuation switch per channel, gold-plated XLR output connectors which provide reliable, low-noise operation and per channel ground-lift switches to eliminate ground-loop hum issues.

Read more
coming soon $94.98
FORTHCOMING
Magma CTRL Case Rodecaster Pro For Rode Rodecaster Pro Podcast Production Console
Cat: 803981 Rel: 31 Mar 21
 
Custom hardcase for Rode Rodecaster Pro
Notes: The CTRL Rodecaster Pro is custom designed to a hold the Rodecaster Pro and is a very lightweight and convenient solution to carry your mobile podcast studio well protected to your next recording session. Crafted from rigid Durashock molded EVA shell and a high-density foam interior it is furthermore equipped with a subdivided main compartment and accessory panel to organize audio cables and microphones.

FITS:
Rodecaster Pro

BASICS:
Crafted from 6 mm thick and rigid Durashock molded EVA foam and water rejecting polyester exterior shell
Sturdy zipper
Including removable divider and practical cable organizer panel
Including removable egg-foam padding to protect knobs, faders and pads
Comfortable carrying handles and shoulder strap
Compatible with Decksaverr cover

SPECS:
Outer measures: 50,5 x 27 x 11 cm
Inner measures: 52 x 30 x 12 cm
Weight: 1,3 kg
Read more
MRP:$96.13 SAVE 17%
coming soon $80.10
FORTHCOMING
Tangible Waves AE Modular 2-Row 16x2 Standard Bamboo Wood Case
Cat: 807736 Rel: 31 Mar 21
 
16x2 Eurorack case with wooden front and sides
Notes: This is a variant of the standard red/black racks for AE modular with wooden front and sides.

Same as with the standard cases, via a joint kit (not included) another case of this width (either one-row or two-row, standard or wooden type) can be attached at a free angle; the bus is connected via a short connector cable between both cases.

The sides, front and back are made of real-wood veneer covered MDF.
Read more
MRP:$65.92 SAVE 17%
coming soon $54.92
FORTHCOMING
Tangible Waves AE Modular 2-Row 20x2 Wide Bamboo Wood Case
Cat: 809646 Rel: 30 Apr 21
 
20x2 Eurorack case with wooden front and sides
Notes: This is a variant of the standard red / black racks for AE modular with wooden front and sides.

Same as with the standard cases, via a joint kit (not included) another case of this width (either one-row or two-row, standard or wooden type) can be attached at a free angle; the bus is connected via a short connector cable between both cases.

The sides, front and back are made of real-wood veneer covered MDF.
Read more
MRP:$74.16 SAVE 17%
coming soon $61.78
FORTHCOMING
Tangible Waves AE Modular 2-Row 20x2 Wide Walnut Wood Case
Cat: 809653 Rel: 31 Jan 24
 
20x2 Eurorack case with wooden front and sides
Notes: This is a variant of the standard red / black racks for AE modular with wooden front and sides.

Same as with the standard cases, via a joint kit (not included) another case of this width (either one-row or two-row, standard or wooden type) can be attached at a free angle; the bus is connected via a short connector cable between both cases.

The sides, front and back are made of real-wood veneer covered MDF.
Read more
MRP:$74.16 SAVE 17%
coming soon $61.78
FORTHCOMING
Tascam TM-70 Dynamic Microphone For Podcast Production & Live Streaming
Cat: 811403 Rel: 30 Apr 21
 
Dynamic microphone for broadcasting
Notes: The TM-70 is a dynamic microphone specifically engineered for broadcasting, podcasting and audio streaming. Being tuned to the characteristics of the human voice, it captures the nuances of vocal performances while its super-cardioid polar pattern helps to minimize ambient noise. As a result, you get more of your voice, and less of the room. The TM-70 delivers just the right mix-ready sound, so you can focus on your content rather than tweaking EQ settings.

Mic holder, desktop stand, and a connection cable are included in the package, giving you everything you need for the perfect performance.

Transducer type: Dynamic
Polar pattern: Supercardioid
Frequency response: 30 Hz to 20 kHz
Sensitivity: -51 dB i3 dB (0 dB = 1 V/Pa at 1 kHz)
Output impedance: 250 O i30 % (at 1 kHz)
Output connector: 3-pin XLR, male
Dimensions (L × O): 154 mm × 47 mm
Weight: 285 g
Included items: Suspension shock-mount, tabletop stand, cable
Read more
MRP:$108.49 SAVE 17%
coming soon $90.40
FORTHCOMING
Edifier R1280T2.0 Powered Book Shelf Speaker 42 Watts Classic Wood Finish (brown, pair)
Cat: 809006
 
Bluetooth speakers with dual RCA inputs
Notes: Edifier R1280T 2.0 Powered Book Shelf Speakers 42 Watts Classic Wood Finish

The R1280T powered bookshelf speakers has combined a retro look with a modern sense of audio quality. If you're looking for affordable and versatile bookshelf speakers with uncompromising sound the R1280T bookshelf speakers is your go-to 2.0 speaker system. Featuring a 4-inch bass driver and a calibrated, flared bass reflex port, this bookshelf speaker system delivers robust, rich bass notes that are full of presence and depth. The faithful sound production and performance of the R1280T are any audiophiles dream. Most Edifier customers are using our R1280T powered bookshelf speakers for connecting their turntables for the best audio experience. Enjoy your classic vinyl's while enjoying the advancements in modern day audio technology.

Personalise your listening experience with the bass, treble and volume dials on the active bookshelf speaker. The quality sound produced form these bookshelf speakers deliver a precise booming midrange that tantalises any reviewer. A compact sized handy remote control is included. You can adjust the volume and set the speakers to mute when needed without having to reach the speakers; power and perfection at your fingertips. The Edifier R1280T comes with built-in tone control at the side of the active speaker. Depending on the preference, you can make micro adjustments of treble and bass from -6 to +6 db. Digital volume control is automatically set to a comfortable level everytime the speakers are powered on.

R1280T powered bookshelf speakers lets you connect to multiple audio devices using the dual RCA inputs. By looking at the back panel you can easily tell one of these is a passive speaker and one is an active speaker. The active speaker has two inputs located on the back. These inputs are perfect for RCA to RCA or RCA to AUX connections. Connect them to a PC, laptop, tablet, phone or record player. The speakers are connected to each other via regular speaker wire. The variety of cables included ensures our customer enjoy their music from most devices right out of the box.
Read more
coming soon $94.98
FORTHCOMING
Modulaire Maritime Decca Voltage Source/Manual CV Gate/Muting Control Module
Notes: This module is a manual control module for modular synth. Thought for live performance or to bring more manual control while recording in "one take" the module is, at the same time:

-Voltage source
-Manual CV-Gate
-Muting - Control module

Details & use:

Two voltage source's outputs (at the top) provides voltages from 0 to 5V*. Those voltages are buffered thru op-amp and are controllable by potentiometers. Each have a dedicated button-switch so the selected voltages can be applied precisely (for exemple applying it on filter's cv's, oscillator's fm, delay's cv, etc.) on one part of the sequence for eg. or at desired moment.
Those buttons are maintained (enable/disable, stays active when pressed) and are illuminated when "on".

The voltage sources, beside their use for manual cv modulation, are also very useful in all situation where fixed voltages are needed (to fix and keep desired cv amount, for the same accent on drum module for ex. or when using an external instruments who works on line level so much more quite than modular- once connected to a modular-you'll need a constant voltage to keep the VCA permanently open so that the instrument can reach the modular's level and you can hear it, use it normally, etc.

The four grey button-switches (on the sides) are the simple manual gates and are momentary with no latency. They will send gate signal as long as you keep them pressed (led indicated).
You'll use them to trigger manually an envelopes, play drum modules for eg, apply it on any other cv/gate input..

The three illuminated button-switches have inputs so they can be used to mute signals.

The two on the bottom are maintained while the one in the middle is momentary - for the bigger flexibility of use. The button's leds will indicate the signal going thru.

You'll use those switches to stop, mute one signal let go another one, break a sequence's gate with another one from the another switch, etc. -all under your fingers!

If nothing is plugged in the inputs of those switches they'll find their manual gate use-just like their neighbor buttons.

Made for more fun with a modular!
Read more
MRP:$138.70 SAVE 36%
coming soon $89.25
FORTHCOMING
Rides In The Storm Modules TUL Dual Attenuverter & Offset Generator Module
Cat: 805793 Rel: 01 Feb 21
 
Dual attenuverter/offset generator module
Notes: TUL Dual Attenuator/-verter and Offset Generator

Temperature stable and accurate circuit design. The attenuator is exponential and can be regulated more precisely in the initial range.

As an attenuverter, the fader describes an S-curve, i.e. it is in Range +/- 0 finer adjustable. The AC gain is 1, so there is no loss at maximum Att/Attv settings.

The offset potentiometer shift by +/- 5 volts and can be switched to another mode on the back of the PCB using jumpers.

Here the attenuation is towards zero made until it is zero.

The normal mode leaves the voltage at the specified offset value.

Channel A is normalized to channel B so you can get two different CVs.

On the rear side of the PCB, you have a jumper to switch from offset pre fader (good for ADSR) and post fader.

Power consumption: +/- 20mA

Rackspace: 6HP

CV out is (-/+5Volt) if nothing is patched to IN A/B, so you can use it as a manual CV source.
Read more
coming soon $75.52
FORTHCOMING
Tenderfoot Electronics Ease 3 Channel Mixing Attenuverter Module
Cat: 805886 Rel: 01 Feb 21
 
3-channel attenuverter/CV & audio mixer module
Notes: Ease is a 4HP, 3-channel attenuverter that can also be used as a CV or audio mixer.

If their outputs are not in use, channel 1 and 2 mix into the output of channel 3.

With the inputs unpatched, each channel can be used as a +/- 5V DC source.
Read more
MRP:$122.22 SAVE 21%
coming soon $96.12
FORTHCOMING
Transient Modules 4R Quad Random Voltage Generator Module
Cat: 804247
 
Quad random voltage generator module
Notes: The 4R is a quad random voltage generator in 2HP. It generates two different random stepped voltages per input, each time a rising edge is sensed at TRIG1 or TRIG2. The inputs are independent so they can work at different clock speeds. As TRIG2 is normalled to TRIG1 it is also possible to get 4 random values with just one trigger. The voltage range of each pair of outputs can be set as unipolar (0V to +5V) or bipolar (-5V to +5V).

Technical specifications:

2HP.

50 mm depth.

Consumption: 60mA +12V; 40mA -12V
Read more
MRP:$120.85 SAVE 20%
coming soon $96.12
FORTHCOMING
Transient Modules 1F Voltage Controlled Switch Module
Cat: 804240
 
Voltage controlled switch module
Notes: The 1F is a voltage controlled switch, intended to be 'one friend' for your sequencer. Its design has been specially focused on working with sequences, by giving them some randomness, applying transpositions or constant variation over time. For this, 0.1% tolerance resistors have been used to achieve exact unitary gains for precision summing of the v/oct signals. More detailed info on the demo video.

Technical specifications:

4HP.

27 mm depth.

Consumption: 15mA +12V; 10mA -12V
Read more
MRP:$108.49 SAVE 17%
coming soon $90.40
FORTHCOMING
Tenderfoot Electronics Sap 4x Passive Attenuator Module
Cat: 805887 Rel: 01 Feb 21
 
Passive attenuator module
Notes: The ability to attenuate a signal in a modular system is essential, and rack real estate is always at a premium.

Sap offers 4 channels of passive attenuation in 4HP. That's no current drawn from your power supply and 1 channel per HP!
Read more
MRP:$81.02 SAVE 27%
coming soon $59.51
Items 1 to 33 of 33 on page 1 of 1

Filter

Coming Soon: Studio Equipment
Close