安全购物

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

安全购物

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Filters

View:
Options
Items 1 to 6 of 6 on page 1 of 1
Subscribe to our weekly Studio Equipment emails
Cat: 704118 Rel: 11 Jan 19
 
Nexus for effects pedals & Eurorack effects modules
Notes: Are your effects chains suffering from radioactive decay? The Transmutron allows you to combine pedals (and Eurorack effects) within its sonic reactor to create new and exciting compounds! Different results can be achieved using one of three modes: Fission (crossover filter), Fusion (crossfader), and Fallout (resonant wide-notch filter).

In the primary mode, Fission, the signal from your guitar, bass, synth, or drum machine is split into separate frequency bands, sent simultaneously to different effects, and then recombined to a single output (or two separate outputs). The Splitpoint parameter can be controlled manually or with an expression pedal, and simultaneously injected with a control voltage (CV) source for extremely dynamic reactions!

In Fusion mode, the Splitpoint instead acts as a pre-FX level crossfader, rather than splitting the signal into separate bands. This allows for less extreme blends, especially when modulating. In the third mode, Fallout, a resonant wide-notch filter is applied to both pre-FX channel signals, cutting a hole and creating a phasing-wah effect when using an expression pedal or LFO to sweep the Splitpoint back and forth.

To further shape the signals sent to your effects, the Transmutron is equipped with dedicated hi and low cut filters. In Fission and Fallout modes, the cutoff frequencies of these filters also define the end-to-end sweepable range of the Splitpoint parameter and its centre frequency. The filters have selectable slopes of 12, 24, or 48 db/oct, which also affects the crossover filter, and greatly enhances the resonance of the wide-notch filter. If further separation of the parallel FX channels is needed, a dedicated phase switch is on-hand.

Both FX channels have two sets of sends and returns: 1/4-in for guitar pedals and line-level effects, and 3.5mm for Eurorack level processing. For each channel, the 1/4-in and 3.5mm FX loops can be used simultaneously, as they are in series (3.5mm then 1/4-in). The FX sends are half-normalled so they can be used as buffered copies without affecting the returns. Additionally, the 3.5mm FX loops for each channel can be independently switched to pedal/line-level using internal dip switches, which allows for seamless integration with the Boredbrain Patchulator 8000.

How complex the reaction is up to you! From simple tone shaping using only a couple effects, to interconnected combinations of pedals and Eurorack modulation madness, the Transmutron is just the tool you need to reactivate your effects!
Read more
 3 in stock $297.07
Cat: 745481 Rel: 19 Sep 19
 
Polivoks filter chip with CV & Expression pedal inputs
Notes: The Polivoks Filter, from Elta Music, utilizes the classic Soviet filter chip for a unique and iconic filter tone. It provides both CV and Expression pedal inputs, built in LFO, and WOB fader for ultimate control. On board LFO has a fast/slow range switch, and on/off. Separate LFO OUT can be used to control external CV devices. With lowpass, bandpass, highpass, and notch filter types, one can shape tones into whole new realms. The pedal is switched on with a switch, rather than a stomp button, catering towards use as a desktop filter.
Read more
 1 in stock $281.08
Click for better price!
quote 745481
Cat: 531916 Rel: 02 Sep 14
 
Powerful analog filtering and distortion unit
Notes: What is the Sherman Filterbank 2?

A powerful analog filtering and distortion unit with a huge frequency range and a killing TUBE overdrive behavior.
Easy and FUN to use, live and in the studio
A small modular system? YES!
Another 303 clone? NO!
Affordable? YES!
Application: processing every sound source, effect mixing, expanding modular systems, etc.

What you get:

Independent low pass, band pass and high pass filters with resonance, frequency and ADSR (positive - negative) controls
These are switchable between parallel or serial
The second filter has a 6 octave switch, and is synchronizable with the first filter
1 ADSR generator for these filters with an external output for use with more filterbanks or modular systems, triggered by the incoming signal, by a second sounds source, or by a gate
1 FM input for the filters, internal or external audio, LFO or CV
1 VCA overdrive with AR generator also
1 ring modulator input, internal or external audio, LFO or CV

The original Sherman Filterbank (Version 1) is no longer being made and is thus now completely being replaced by this new version !

The global look has remained the same, but there have been added several strong functions. To summarize :

There are 5 extra NEW SWITCHES, 1 extra INPUT (for footpedal), 2 extra new LEDs, a NEW COLOR (silver-grey) with an improved (long-lasting) varnish layer.
The inner electronics have also been adapted to achieve an EVEN BETTER SOUND-QUALITY
We also do have new packing-boxes (silver, with photo on upper side), new flashy stickers (silver) and new adaptors (with Sherman-logo).
All this with the famous solid SHERMAN-QUALITY and the well-known thorough & speedy AFTER-SALES service (repairs).

What's new?

There are 5 extra switches and 2 extra LEDs, and on the back panel there's one pedal input jack. A reworked front-panel lay-out and the grey metal color.

The pedal input allows foot control of freq1and bypass/effect switching. You can rewire an old wah (because they have a switch on board) as shown by te diagram in 'extra stuff'.
A 5mm big green LED indicates "Effect on" on the FB 2
A 3-way switch on the input stage allows Hi boost as well Hi cut (both boosting high frequencies at input)
Another 3-way switch allows "Sensitrig" (which makes the triggering twice as sensitive for, e.g. clean string pad filtering) and "Limit", which leaves the filters more "breathing room" for self-oscillation if the input stage is extremely overdriven.
A 3-way switch has 2 general transpose functions : +1 Octave and + Quint which works nice with monophonic signals, and has a specific dirty character.
A 3-way switch for the really powerful and quite revolutionary "Tracking" function - a monophonic pitch follower, that tunes filter 2 to the incoming pitch, and makes filter 1 slave of filter 2 via the harmonics switch. E.g. in position 2, filter 1 will be pitched one octave higher than filter 2, but still following the pitch. This extra switch activates the "tracking" in a normal or deep "track low" position, with stunning basses as result.

The "revolutionary" aspect of this function is that never before any similar system enhances "on the spot" harmonics and creates new harmonics with fat analog circuits.
An extra white LED indicates when the tracking system is "locked on".
At last there is an 3-way function switch in the LFO section, allowing sawtooth wave shape OR AR retrig : this forces an LFO restart from the AR trig with pumping grooves as unavoidable result. If you want to receive a new brochure, please ask your dealer first.

The Sherman Filterbank is now also midi controlable via kenton control freaks (a small portable hardware console, including sliders)

All the finger-tip MIDI control you need, instantly to hand. Forget your mixer maps and do it all in real-time. An ideal solution for the gigging musician, or the musician who likes to save time & settings. The Kenton Control Freaks are made in the U.K., by Kenton, and are preprogrammed with profiles for the Sherman Filterbank as well. Hundreds of additional profiles are available for download FREE from the Kenton website.

PLEASE NOTE: SUPPLIED WITH EU 2 PIN ADAPTER PLUG ONLY.
Read more
 1 in stock $712.31
Click for better price!
quote 531916
Cat: 649002 Rel: 10 May 17
 
Analog filtering & distortion unit with high frequency range & tube overdrive behaviour
Notes: A classic, but smaller - The Sherman Filterbank is a powerful analog filtering and distortion unit with a huge frequency range and a killing overdrive behaviour. It's easy and FUN to use, live and in the studio processing every sound source, effect mixing, expanding modular systems, etc.

- Independent low pass, band pass and high pass filters with resonance, frequency and ADSR (positive - negative) controls
- These are switchable between parallel or serial
- The second filter has a 6 octave switch, and is synchronizable with the first filter
- 1 ADSR generator for these filters with an external output for use with more filterbanks or modular systems, triggered by the incoming signal, by a second sounds source, or by a gate
- 1 FM input for the filters, internal or external audio, LFO or CV
- 1 VCA overdrive with AR generator also

Connectors:

- MIDI In/Out, 3x Thru
- Main out, out1 (Filter1)
- Trigger AR, AM In, ADSR Out and Trigger In, Link In/Out, FM In, Sig. In, Pedal In
Read more
 1 in stock $665.47
Click for better price!
quote 649002
Cat: 572883 Rel: 19 Jun 15
 
Rack mounted effects unit with RCA & 1/4" jack ins and outs
Notes: We have to admit being more than a little proud when thinking of the Action Filter's history. Twelve years ago we made the first version of this still popular stereo-filter with no end in sight. It still is built upon the same basic principle: ACTION!

Neither MIDI nor control voltage decide about filter sweeps and cues but you. Action Filter demands and supports your intuition and creativity. Reign over frequencies and rhythm instead of being a victim of technique.

What remains?

Like its predecessors, Action Filter 4 consists of a high-/lowpass filter-combination per stereo channel. Together, these either work as bandpass- or notch-filter with variable bandwidth and individual resonance per filter.

What's new?

Unspectacular but a spectacle nevertheless: Beside the mandatory RCA in- and outputs, Action Filter 4 is equipped with 1/4"-jacks. In addition, the FILTER MODE switch made it to the unit's front, labeled as STYLE.

Who is the Action Filter 4 dedicated to?

... of course for all action heroes! With jack- and RCA-connectors, Action Filter 4 is best suited for the DJ booth as well as for studio applications. You can use it to process full tracks or add that "certain something" to individual audio tracks. Emphasize or kill specific frequency bands and - on top of it - have lots of fun actively playing with frequencies! Simply: ACTION!
Read more
 3 in stock $294.93
Click for better price!
quote 572883
Cat: 433132 Rel: 19 Aug 11
 
Analogue multimode desktop filter, includes UK power supply
Notes: The Vermona Filter Lancet is a compact but versatile stand-alone multimode filter for your desktop. It's the right weapon against static sound and boredom and made for any kind of audio signal. The filter section itself has 3 modes: low-pass, high-pass and band-pass. The last one works with a slope of 12 dB per octave whereas low- and high-pass are 24 dB filters.

You can give the filter some extra punch with the Balls knob, known from Kick Lancet. It pushes low and high frequencies of the signal before being filtered. And of course the resonance is self-oscillating.

Other than the filter section of Mono Lancet, the Filter Lancet is not based on (Moog-) cascade circuitry. It was inspired by the filters of the Vermona M.A.R.S. respectively DAF-1 and Action Filter.

Without modulation the Filter Lanced would still be a good filter but kind of boring. So it is equipped with a LFO, an envelope generator, an envelope follower and a CV/pedal input. The LFO has 2 frequency ranges and goes up to 250Hz - that's fast. At low frequencies the LFO can be re-triggered by gate- or audio signals. It has sample & hold and five waveforms: saw up and saw down, square, sine and triangle.

The envelope generator can be triggered by the input signal or an additional audio signal as well as by a gate voltage. If triggering it via gate it works as an attack-sustain-release envelope. With audio triggers its mode is attack-decay. The envelope follower transforms the contour of the input signal into control voltages that can serve as modulation source.

The LFO modulation intensity can be set separately from modulation intensity of envelope generator and envelope follower on the VCF- as well as on the VCA section.

The Filter Lancet features a drive circuit right in the input section to add subtle shades of overdrive up to solid distortions.

The Filter Lancet is packed with useful features. It's a great and powerful addition to any synthesizer including Mono Lancet with or without Modular Dock. But Filter Lancet also is designed for stringed instruments. It creates standard effects like WahWah and tremolo with ease and even adds a palette of extraordinary sounds to any effect repertoire.
Read more
 1 in stock $332.20
Click for better price!
quote 433132
Items 1 to 6 of 6 on page 1 of 1

Filter

Filters
商品
Release Date
Close