Juno Daily

Music and tech news, interviews, features, reviews and more.

Visit Juno Daily

安全购物

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

安全购物

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices. Visit Juno DJ

preorders
USD
我的语言
我的货币
Your wishlist is empty
Items in wishlist:
Recently added:
Loading...
购物车
您的购物车为空
Items in cart:
总和:
Recently added:
Loading...
查看购物车
首页  Equipment  MIDI converters & accessories
Subscribe here to receive our weekly roundup of the latest studio equipment products

Filter

商品
Release Date
Featured

MIDI converters & accessories

For any hardware studio, MIDI accessories are essential to help connect all your synths, drum machines and other gear. Brands like Kenton and MIDI Solutions offer a range of thru boxes, mergers and patchbays to help keep everything connected and in sync. Simple MIDI thru boxes split one incoming signal into multiple outputs, while mergers mix multiple incoming signals. More advanced patchbays allow you to route signals around multiple inputs and outputs, switching routings at the touch of a button. You’ll also find MIDI clock generators from E-RM, offering rock-solid timing when used as the main clock to control all your MIDI gear.
MIDI converters & accessories
Options
Items 1 to 8 of 8 on page 1 of 1
Erica Synths 8-MIDI Thru Box
Cat: 686702 Rel: 27 Apr 18
 
Compact MIDI box featuring 8 MIDI through splitters
Notes: Erica Synths MIDI thru box is professional quality, no latency, one MIDI In to 8 MIDI Through splitter in rigid aluminium case. It allows to connect up to 8 instruments to your sequencer or master keyboard and control them simultaneously without undesired delays and interference.
Read more
 1 in stock $119.34
Click for better price!
or call +44 20 7424 1960
quote 686702
Kenton D-Sync MIDI To DIN Sync Converter Bi-Directional
Cat: 578608 Rel: 07 Jul 15
 
Bi-directional MIDI to DIN Sync converter with 1 MIDI In & 1 MIDI Out / 1 Sync In & 1 Sync Out
Notes: Receives MIDI clock and stop/start data and converts them to DIN-Sync (Sync-24). Also converts DIN-Sync back to MIDI.

High quality Kenton MIDI MIDI to DIN-Sync converter box with opto-isolated MIDI In plus MIDI Out, Sync In & Sync Out sockets. Powered from a multi-region mains adaptor (wall wart) so you can fit and forget. Can also be powered from a USB socket (although not a USB product)
Read more
 1 in stock $109.26
Click for better price!
or call +44 20 7424 1960
quote 578608
Kenton Merge 4 MIDI Merge Box
Cat: 443853 Rel: 11 Jan 12
 
Merge MIDI box with 4 inputs/2 outputs
Notes: The Kenton Merge 4 can merge the data from up to 4 separate MIDI sources (e.g. Master keyboards or controllers) into a single MIDI data stream which appears at both of the MIDI out sockets. It features 4 opto-isolated MIDI inputs and 2 MIDI outputs.

The Kenton Merge 4 is powered from a mains adaptor (wall wart) so you can fit and forget.

Comes with multi-region power supply
Read more
 2 in stock $101.83
Click for better price!
or call +44 20 7424 1960
quote 443853
Kenton Merge 8 Intelligent MIDI Merge Box
Cat: 650248 Rel: 18 May 17
 
MIDI signal mixer unit featuring 8 input connectors
Notes: Merges the data from up to eight separate MIDI sources (e.g. master keyboards, controllers, computers etc.) into a single MIDI data stream which appears at both the MIDI out sockets. Merges all MIDI data including MIDI Clock, MIDI time code and SysEx (see the manual for merging rules). Can also be configured as two completely independent 4 into 1 mergers with the simple press of a recessed button (see manual for details).

- 8 opto-isolated MIDI Ins
- 2 MIDI Outs

Comes with mult-regional power supply
Read more
MRP:$153.82 SAVE 11%
 1 in stock $137.65
Kenton MIDI USB Host mk3 USB Host To MIDI Converter
Cat: 884863 Rel: 22 Jun 22
 
USB Host to MIDI converter for ‘Class Compliant’ USB MIDI Devices
Notes: Your USB device is plugged into the MIDI USB Host mk3 instead of into a computer. It provides MIDI In & Out sockets for USB MIDI keyboards and controllers which have only a USB B type socket. For example, used with a USB-Solo, it allows the USB-Solo to be used in a standard MIDI setup, just like a Pro-Solo. It has a USB Host port (USB A type socket), a MIDI In and a MIDI Out (both 5 pin DIN).

The MIDI USB Host mk3 now has additional features. In addition to the standard operating mode, there are now two further modes.

Standard mode (LED Green):
MIDI data received at the MIDI In socket is sent to the USB device and MID data from the USB device is sent to the MIDI Out socket.

Merge 1 mode (LED Amber):
MIDI IN does not go to USB device but instead is merged with MIDI data coming from the USB device which is then sent to the MIDI Out socket.

Merge 2 mode (LED Red):
MIDI IN data is sent to the USB device & is also merged with MIDI data from the USB device which is then sent to the MIDI Out socket.

The modes are selected sequentially by pressing the recessed push button - the LED colour indicating which mode is current.

The attached USB MIDI device MUST be 'Class Compliant'.

The MIDI USB HOST is powered by a regulated 5V mains adaptor (supplied), and can supply up to 1 Amp of buss power to the attached USB device. This product is supplied with a multi-region power supply suitable for use in most countries.

Attractively finished in brushed aluminium with black screen print

Dimensions: 110mm x 55mm x 32mm

Connecting
You can connect one "Class Compliant" USB device directly into the MIDI USB Host. If your host has the latest firmware already installed then you can plug in a powered USB hub and up to four USB devices can then be connected. Earlier MIDI USB Host mkIIs can be updated with a free download which is available from the support section of our website. Serial numbers N6-2421 already have the hub compatible firmware. Serial numbers N3-0541and upward can be updated.

It is recommended that you attach your USB device to the MIDI USB Host before applying power. Then plug-in and power the power adaptor. The active LED should be lit up. If you apply power with nothing plugged into the MIDI USB Host, the Active LED will flash steadily; this is to indicate that it is waiting for a suitable device to be attached. If it is still flashing when you have attached your device, then it is possible that your device is not class compliant, however you could try turning off the power and start again.

Some USB MIDI devices have two modes of operation and can be set to operate in Class Compliant mode even if this is not the default. The Class Compliant mode might be called "generic driver", the other mode may be called something like "advanced driver". Consult the device manual to see if the mode can be set for Class Compliant.

If you unplug then re-plug the USB cable while it is powered the device might reconnect, but it is not certain.

Power

It is essential to use only the supplied 5V regulated power adaptor. Applying a voltage higher than 5V to the MIDI USB Host will probably not damage the MIDI USB Host itself, but it could damage any attached USB device as the 5V is passed on to the attached USB device for buss power. There is protection circuitry inside the MIDI USB Host to protect against reverse polarity and over-voltage, but these should be treated as a last resort and are not guaranteed to prevent damage to an attached USB device in the event of over-voltage as the USB buss voltage could rise to 6.5V before being clamped.

Care should be taken to ensure that power adaptors for other pieces of equipment are not accidentally plugged into the MIDI USB Host.

If the input voltage rises above 6.5 volts then power will be shut off. The LED will go out and the unit will not operate again until power has been removed for at least 60 seconds. This allows time for the thermal fuse to reset.

The following Yamaha keyboards ar known to be class compliant and therefore should work OK:

PSR-E353, PSR-E443
PSR-S670, PSR-S770, PSR-S970, PSR-A3000, TYROS-5
NP-12, NP-32
DGX-650, DGX-660
P-105, P-115, P-255

The following keyboards are known to incorporate a USB hub and therefore will only work with firmware v2005 or later (s/n N6-2421 and above) for the MIDI USB Host:

Korg Microkey 61
Korg Microkey 49
Korg Microkey 37

Power: 90mA, USB mini-B socket - leaving 910 mA available for the attached USB device
Dimensions: 110 x 55 x 32 mm
Weight: 100g (excluding power supply)
MIDI: 1x IN, 1x OUT - both 5 pin DIN
Power Supply: 5V DC / 1 Amp regulated - (never use an unregulated supply as unregulated supplies typically give a higher output voltage than shown).

This product is supplied with a multi-region power supply which is suitable for use in the UK, EU, US/Canada and AUS/NZ.
Read more
 5 in stock $106.08
Click for better price!
or call +44 20 7424 1960
quote 884863
Kenton THRU12 MIDI Thru Box
Cat: 698450 Rel: 09 Aug 18
 
1 MIDI in to 12 MIDI thru
Notes: Receives MIDI data from a single MIDI OUT (e.g. sequencer or master keyboard) and produces identical copies at the 12 MIDI THRU sockets. These can then be connected to the MIDI IN of sound modules or other devices which require MIDI signals sent to them.

High quality Kenton MIDI Thru box with opto-isolated MIDI In and separate drive for each MIDI Out. Powered from a mains adapter so you can fit and forget.
Read more
 2 in stock $127.29
Click for better price!
or call +44 20 7424 1960
quote 698450
MIDI Solutions Footswitch Controller Multi-Function MIDI Event Generator
Cat: 524238 Rel: 13 Mar 14
 
Compact footswitch controller for converting 1/4" jack signal into MIDI events
Notes: The MIDI Solutions Footswitch Controller provides a 1/4" phone jack input for connection to a footswitch or contact closure which can be used to trigger MIDI events (for eight footswitch inputs in a single rack space unit, see the MIDI Solutions F8). Triggered MIDI events are merged with incoming MIDI messages and sent to the MIDI output of the Footswitch Controller.

Triggered event types are programmable and include: Note, Control Change, Pitch Bend, Program Change, Start/Stop, System Exclusive

Other functions include: Program Change INC/DEC, Rechannelize, Transpose, Tap Tempo, Note-on Filter

MIDI Echo and Footswitch Toggle parameters are selectable on/off.

The Polarity of the footswitch can be determined automatically on power-up, or programmed to normally-open or normally-closed.

The Footswitch Controller is programmed by sending it MIDI System Exclusive messages (see FAQs - Programming). This can be done easily with the Processors Programming Tools software. Once programmed, its settings are retained even after power is removed. The Footswitch Controller can be reprogrammed with new settings as often as needed.

The Footswitch Controller is MIDI-powered, and requires no batteries or power supply to operate with most MIDI products (see FAQs - Power and FAQs - LED for more information). A MIDI indicator LED lights up when the product is powered and flashes when MIDI data passes through it.
Read more
 3 in stock $131.02
Click for better price!
or call +44 20 7424 1960
quote 524238
Old Blood Noise Endeavors MTET MIDI To Expression Translator Utility Device
Cat: 949873 Rel: 16 Jun 23
 
MIDI to expression translator utility device.
Notes: Realizing matching gaps in the market and their friends' workflows, Old Blood Noise Endeavors unveils their newest utility device, the MIDI to Expression Translator (MTET). MTET is a simple device for complex workflows.

It receives MIDI CC messages and turns them into expression outputs, allowing players to unlock MIDI control over their expression-enabled devices.

Where once there was only a foot, now there is envelope control, LFO control, snapping to preset positions: any MIDI shape can express an OBNE (or similar) device.

Language is hard: let's start at the start. Communication is complex, beautiful a real thorn in our sides. Many languages, dialects, standards. Some similar, some vastly different. A linear sweep, a barrage of Bits.

Music, of course, is meant to be the universal language, but Old Blood Noise Endeavors' devices don't see it that way.

The MIDI To Expression Translator (MTET) does exactly what it says on the tin. It receives MIDI messages from external MIDI devices and uses those MIDI messages to create four separate Expression outputs for use with external expression enabled devices.

MTET uses a 50k digital pot, wired for TRS connection with the tip active (connected to the wiper). It is assumed the external expression-enabled unit will apply to the sleeve and reference voltage to the ring. It is configured to communicate with other devices using this standard. Its primary purpose is to interface with Old Blood Noise Endeavors pedals and serve as a communicator between them and a MIDI controller. However, it will work with many other units that use the same expression setup as OBNE.
Read more
MRP:$126.24 SAVE 12%
 3 in stock $111.41
Items 1 to 8 of 8 on page 1 of 1
Cart subtotal: