安全购物
Studio equipment
Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.
安全购物
DJ equipment
Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices. Visit Juno DJ
Filter
Synth Module Accessories
Essentials for any Eurorack modular synth setup, we stock a full range of accessories including patch cables, screws and cases. Our most popular accessories include Befaco’s excellent Knurlies, which make it quick and easy to swap modules without tools. You’ll also find cables and adaptors for MIDI, power supplies and audio signals as well as CV/gate patch cables. Cable holders, blank Eurorack panels and a range of powered Eurorack cases of all sizes complete our selection. Brands like ALM Busy Circuits, 4ms and Doepfer make a wide variety of handy accessories to help make your modular rig complete.
People also bought...
Befaco M3 Knurlies Synth Module Screws (pack of 50) (synth module screws)
Cat: 668668 Rel: 09 Nov 17
Pack of 50 screws specially designed for Eurorack
Notes: Knurlies are the first screws specially designed for Eurorack - engineered with love by Befaco to make re-arranging your case a matter of minutes!
Knurlies can be fastened by hand, phillips, slot or allen, and include plastic washers to avoid rack-rash.
These screws are M3x7mm, so they can also be used on 3mm thick panels as well as regular 2mm ones.
… Read moreKnurlies can be fastened by hand, phillips, slot or allen, and include plastic washers to avoid rack-rash.
These screws are M3x7mm, so they can also be used on 3mm thick panels as well as regular 2mm ones.
6 in stock $22.01
People also bought...
Notes: Break out MIDI signals into a 3.5mm stereo jack.
- Tip = Pin 4 (Source)
- Ring = Pin 5 (Sink)
- Sleeve = Pin 2 (Shield)
… Read more- Tip = Pin 4 (Source)
- Ring = Pin 5 (Sink)
- Sleeve = Pin 2 (Shield)
4 in stock $7.00
People also bought...
4ms Right Angle Barrel Power Cable For Daisy Chaining Row Powers & Pods (barrel power cable)
Cat: 725489 Rel: 15 Apr 19
Right angle 2.1mm barrel plug
Notes: Right angle 2.1mm barrel plug (5.5mm outer diameter, positive tip). Short barrel to barrel cable for daisy-chaining Row Powers and/or Pods. Cable is 11" long (centre of tip to centre of tip), suitable for two Pods next to each other or in front/behind each other. Also compatible with Row Power modules.
Both ends of the cable have a right-angle plug.
… Read moreBoth ends of the cable have a right-angle plug.
9 in stock $4.66
People also bought...
Cat: 595826 Rel: 19 Jan 16
4HP power supply module for Eurorack format systems
Notes: The microZEUS is a 4HP power supply module for Eurorack format synthesizers. It is the smallest and most powerful power supply available for its size.
uZEUS with flying bus boards: this version features two ribbon bus boards. All you have to do is plug in your modules and play.
The uZEUS mixes linear and switching power technology to produce 1000mA at +12V, 500mA at -12V, and 170mA at +5V and uses a standard +15VDC non-regulated wall adapter for power.
… Read moreuZEUS with flying bus boards: this version features two ribbon bus boards. All you have to do is plug in your modules and play.
The uZEUS mixes linear and switching power technology to produce 1000mA at +12V, 500mA at -12V, and 170mA at +5V and uses a standard +15VDC non-regulated wall adapter for power.
3 in stock $86.98
Click for better price!
or call +44 20 7424 1960
quote 595826
quote 595826
People also bought...
Cat: 714422 Rel: 31 Dec 18
10-16 pin power cable
Notes: Standard Eurorack power cable.
Use the 10-16 variant for most modules. 16-16 is for modules that use the internal +5V rail.
Length: 25CM (9.8")
… Read moreUse the 10-16 variant for most modules. 16-16 is for modules that use the internal +5V rail.
Length: 25CM (9.8")
1 in stock $1.03
People also bought...
Doepfer A-100B4 Blank Panel 4TE (silver) (blank panel)
Cat: 755425 Rel: 14 Nov 19
Robust, blank front panel for use with modular racks & other applications - 4HP wide
Notes: Blank panel, 4HP, constructed from anodised aluminium, silver.
… Read moreMore than 10 in stock $3.63
People also bought...
4ms 10 Pin Multi Power Cable (synth module power cable)
Cat: 711993 Rel: 12 Dec 18
Flexible power cable for Eurorack modules
Notes: 10-conductor ribbon cable with three 10-pin connectors and a 16-pin connector on one end (20" total length), for connecting more than 2 modules in a Pod.
… Read more! low stock $7.00
People also bought...
Erica Synths Patch Cable Holder (30cm) (patch cable holder)
Cat: 755444 Rel: 05 Nov 19
Patch cable holder
Notes: We wanted to organize patch cables that were hanging on all possible objects in our Lab, therefore we decided to make patch cable holders.
Rigid, 2mm aluminium powder coated cable holders can host over 100 patch cables in perfect order! Two screws for fixing the cable holder are included.
… Read moreRigid, 2mm aluminium powder coated cable holders can host over 100 patch cables in perfect order! Two screws for fixing the cable holder are included.
2 in stock $27.70
People also bought...
Doepfer A-100B2 Blank Panel 2TE (silver) (blank panel)
Cat: 755424 Rel: 14 Nov 19
Robust, blank front panel for use with modular racks & other applications - 2HP wide
Notes: Blank panel, 2HP, constructed from anodised aluminium, silver.
… Read more More than 10 in stock $3.37
People also bought...
Doepfer A-100B8 Blank Panel 8TE (silver) (blank panel)
Cat: 755427 Rel: 14 Nov 19
Robust, blank front panel for use with modular racks & other applications - 8HP wide
Notes: Blank panel, 8HP, constructed from anodised aluminium, silver.
… Read more More than 10 in stock $4.14
People also bought...
Tiptop Audio Happy Ending Kit (black) (modular synth starter kit)
Cat: 590437 Rel: 10 Nov 15
Modular starter kit containing rails, rack ears and power supply
Notes: The Happy Ending Kit is an easy way to get everything needed to start a Eurorack modular system.
The Happy Ending Kit includes:
1 x Z-Rails set plus screws to attach to Z-Ears
1 x uZeus 4HP PSU with 2 x flying bus boards
1 x UK 3-pin mains adapter
… Read moreThe Happy Ending Kit includes:
1 x Z-Rails set plus screws to attach to Z-Ears
1 x uZeus 4HP PSU with 2 x flying bus boards
1 x UK 3-pin mains adapter
1 in stock $121.16
Click for better price!
or call +44 20 7424 1960
quote 590437
quote 590437
People also bought...
Notes: 4ms blank panel - 1HP width. Black coloured PCB material with 4ms logo.
… Read more 7 in stock $4.40
People also bought...
Doepfer A-100B1 Blank Panel 1TE (silver) (blank panel)
Cat: 755421 Rel: 14 Nov 19
Robust, blank front panel for use with modular racks & other applications - 1HP wide
Notes: Blank panel, 1HP, constructed from anodised aluminium, silver.
… Read more More than 10 in stock $3.37
People also bought...
Cat: 752440 Rel: 28 Oct 19
Flying bus cable - male pins
Notes: Flying Bus (male pin) are passive power distribution cables that work with the Row Power to distribute power to your modules.
Can be daisy-chained if extra headers are needed. One 14" flying bus cables with 7 male header pins.
… Read moreCan be daisy-chained if extra headers are needed. One 14" flying bus cables with 7 male header pins.
2 in stock $15.01
People also bought...
Notes: 4ms blank panel - 2HP width. Black coloured PCB material with 4ms logo.
… Read more 7 in stock $4.40
People also bought...
Chord 6.3mm Mono Jack Plug To 6.3mm Mono Jack Plug Patch Cable (0.15m/mixed colours/pack of 6) (patch cables)
Cat: 447089 Rel: 10 Feb 12
Pack of 6 audio leads with professional low-noise cable
Notes: This pack of 6 guitar audio patch leads from Chord is designed for connecting effects processors, sound modules, pedals etc. in coloured insulation. They are terminated at each end with a right angled 6.3mm jack plug.
… Read more1 in stock $4.66
People also bought...
4ms Pod64X 64HP Powered Synth Module Enclosure Case (synth module enclosure case)
Cat: 769789 Rel: 20 Mar 20
Eurorack enclosure case
Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.
The Pod64X is 64HP with 2.16" (55mm) of available module depth. The built-in power supply has four power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.
Pods require a power brick, or a barrel cable to daisy-chain to a Pod or Row Power that's already powered.
Pods are a perfect way to get started in Eurorack, or add a couple more modules to your monster system!
Made from 100% anodized aluminum, Pods are light, tough and perfect for on-the-go set ups. The power supply can handle up to 1.4A of +12V, which is plenty of juice for even the most modern digital modules. (Or if you prefer to DIY your power supply, Pods are also available unpowered)
Each Pod64X typically will house up to six modules, but more can be accommodated using a multi-power cable accessory.
Mix and match your Pods with desktop synths, effect pedals, drum machines or any musical gear for a flexible modular system. Pods can even daisy- chain with the 4ms Row Power system making them a convenient outboard mini-skiff. Need to add another module? Just add a Pod! Need to pack light for a live set? Just grab the Pods you need and go!
Basic Features:
64 HP of Eurorack modular space
Extra room for deep modules
Standard M3 threaded holes
100% lightweight anodized aluminum
Built-in Power supply
Red, White, and Blue LED power indicators
Includes:
64HP Pod, black anodized aluminum
Built-in power supply with six Eurorack power headers
Extra deep (2.16"/55mm) fits virtually every Eurorack module
M3 x 8mm pan-head screws, stainless steel (20)
Adhesive rubber feet (4)
Does not include barrel cable or power brick
Power Supply:
Four 16-pin Eurorack power shrouded headers
+12V max 1.4A
-12V max 0.67A
+5V max 1.0A
Power input: Two barrel jacks for daisy-chaining
15V-20VDC, 2.1mm positive tip
Exterior dimensions:
Width: 329.7mm (12.98")
Height: 159.5mm (6.28")
Depth: 57mm (2.24")
Interior dimensions:
Max module depth: 55mm (2.16")
Module width: 64HP
Weight:
0.5 kg = 17 oz
… Read moreThe Pod64X is 64HP with 2.16" (55mm) of available module depth. The built-in power supply has four power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.
Pods require a power brick, or a barrel cable to daisy-chain to a Pod or Row Power that's already powered.
Pods are a perfect way to get started in Eurorack, or add a couple more modules to your monster system!
Made from 100% anodized aluminum, Pods are light, tough and perfect for on-the-go set ups. The power supply can handle up to 1.4A of +12V, which is plenty of juice for even the most modern digital modules. (Or if you prefer to DIY your power supply, Pods are also available unpowered)
Each Pod64X typically will house up to six modules, but more can be accommodated using a multi-power cable accessory.
Mix and match your Pods with desktop synths, effect pedals, drum machines or any musical gear for a flexible modular system. Pods can even daisy- chain with the 4ms Row Power system making them a convenient outboard mini-skiff. Need to add another module? Just add a Pod! Need to pack light for a live set? Just grab the Pods you need and go!
Basic Features:
64 HP of Eurorack modular space
Extra room for deep modules
Standard M3 threaded holes
100% lightweight anodized aluminum
Built-in Power supply
Red, White, and Blue LED power indicators
Includes:
64HP Pod, black anodized aluminum
Built-in power supply with six Eurorack power headers
Extra deep (2.16"/55mm) fits virtually every Eurorack module
M3 x 8mm pan-head screws, stainless steel (20)
Adhesive rubber feet (4)
Does not include barrel cable or power brick
Power Supply:
Four 16-pin Eurorack power shrouded headers
+12V max 1.4A
-12V max 0.67A
+5V max 1.0A
Power input: Two barrel jacks for daisy-chaining
15V-20VDC, 2.1mm positive tip
Exterior dimensions:
Width: 329.7mm (12.98")
Height: 159.5mm (6.28")
Depth: 57mm (2.24")
Interior dimensions:
Max module depth: 55mm (2.16")
Module width: 64HP
Weight:
0.5 kg = 17 oz
2 in stock $184.34
Click for better price!
or call +44 20 7424 1960
quote 769789
quote 769789
People also bought...
Electrosmith 16-16 Pin Synth Module Power Cable (25cm) (ribbon power cable)
Cat: 714423 Rel: 31 Dec 18
16-16 Pin Eurorack Power Cable
3 in stock $1.55
People also bought...
Tiptop Audio Flying Bus Board Cable (short) (bus board)
Cat: 595829 Rel: 19 Jan 16
Cable version of a distribution PCB (printed circuit board) - short
Notes: TipTop's Flying Bus Board is a cable version of a distribution PCB (printed circuit board) and extends the reach of one of your uZeus cables or adds a third row.
… Read more 1 in stock $13.98
People also bought...
Cat: 670820 Rel: 20 Nov 17
8 x patch cables, 6.3mm TRS to same, 3ft
Notes: These cables are designed to interconnect pro audio gear with balanced phone jacks. They are ideal for use with balanced phone patch bays. Features include:
- Nickel-plated plugs for rugged durability and efficient signal transfer
- Oxygen-Free Copper (OFC) conductors for enhanced signal clarity
- OFC spiral shields for effective EMI and RFI rejection and flexibility
Connectors: 1/4 in TRS to Same
Conductors: 26 AWG x 2 OFC
Shield: 85% OFC Spiral
Quantity: 8 pc
… Read more- Nickel-plated plugs for rugged durability and efficient signal transfer
- Oxygen-Free Copper (OFC) conductors for enhanced signal clarity
- OFC spiral shields for effective EMI and RFI rejection and flexibility
Connectors: 1/4 in TRS to Same
Conductors: 26 AWG x 2 OFC
Shield: 85% OFC Spiral
Quantity: 8 pc
2 in stock $24.23
People also bought...
4ms Pod48X 48HP Powered Synth Module Enclosure Case (synth module enclosure case)
Cat: 725517 Rel: 12 Apr 19
Portable, compact enclosure that turns Eurorack modules into table-top instruments
Notes: The Pod48X is 48HP with 2.00" (51mm) of available module depth. The built-in power supply has four power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.
Pods require a power brick. If you already have a powered Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain powered Pods.
The Pod48X includes ten (10) M3x8mm stainless steel screws and is compatible with M3 Knurlies.
… Read morePods require a power brick. If you already have a powered Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain powered Pods.
The Pod48X includes ten (10) M3x8mm stainless steel screws and is compatible with M3 Knurlies.
2 in stock $160.52
Click for better price!
or call +44 20 7424 1960
quote 725517
quote 725517
People also bought...
Doepfer A-100B42 Blank Panel 42TE (silver) (blank panel)
Cat: 755428 Rel: 14 Nov 19
Robust, blank front panel for use with modular racks & other applications - 42HP wide
Notes: Blank panel, 42HP, constructed from anodised aluminium, silver.
… Read more 9 in stock $10.35
People also bought...
Tiptop Audio Happy Ending Kit (silver) (modular synth starter kit)
Cat: 590438 Rel: 10 Nov 15
Modular starter kit containing rails, rack ears and power supply
Notes: The Happy Ending Kit is an easy way to get everything needed to start a Eurorack modular system.
The Happy Ending Kit includes:
1 x Z-Rails set plus screws to attach to Z-Ears
1 x uZeus 4HP PSU with 2 x flying bus boards
1 x UK 3-pin mains adapter
… Read moreThe Happy Ending Kit includes:
1 x Z-Rails set plus screws to attach to Z-Ears
1 x uZeus 4HP PSU with 2 x flying bus boards
1 x UK 3-pin mains adapter
2 in stock $121.16
Click for better price!
or call +44 20 7424 1960
quote 590438
quote 590438
People also bought...
ALM 3.5mm Mini Jack To Mono 6.35mm (1/4") Jack Cable (jack to jack cable)
Cat: 801678 Rel: 23 Nov 20
Mini jack to mono jack cable
Notes: Mono 3.5mm mini jack to mono 6.35mm (1/4") jack cable.
Useful for connecting eurorack modules (i.e S.B.G.) to external music equipment.
Custom ALM barrel moulding matching ALM's patch cables.
2m length.
… Read moreUseful for connecting eurorack modules (i.e S.B.G.) to external music equipment.
Custom ALM barrel moulding matching ALM's patch cables.
2m length.
6 in stock $8.80
People also bought...
Befaco DIN5 MIDI To TRS Mini-Jack Type B Cable (grey, 1.5m, pack of 3) (DIN to TRS cable)
Cat: 784170 Rel: 07 Dec 20
DIN5 to TRS cable
Notes: 3,5mm TRS to male DIN 5
150cm length
… Read more150cm length
2 in stock $9.58
People also bought...
Tiptop Audio Flying Bus Board Cable (long) (bus board)
Cat: 640233 Rel: 06 Feb 17
Cable version of a distribution PCB (printed circuit board) - long
Notes: TipTop's Flying Bus Board is a cable version of a distribution PCB (printed circuit board) and extends the reach of one of your uZeus cables or adds a third row.
… Read more 1 in stock $15.27
People also bought...
Erica Synths 10cm Braided Patch Cables (black, pack of 5) (patch cables)
Cat: 838037 Rel: 21 Jul 21
Braided patch cables: black, 10cm, pack of 5
Notes: Set of 5 high-quality braided & soft 3.5mm patch cables for use with eurorack modules. The braided patch cables have a soft touch & are perfect for traveling with your eurorack system patched as they are super-bendable and much less likely to get tangled even with your case lid closed. Pleasant & practical for a better patching experience.
… Read more 4 in stock $10.35
People also bought...
Cat: 670812 Rel: 20 Nov 17
8 x patch cables, 3.5mm TS to same, 1.5ft
Notes: These cables are designed to interconnect pro audio gear with unbalanced mini phone jacks. They are ideal for use with modular synthesizers and sound modules.
- Nickel-plated plugs for rugged durability and efficient signal transfer
- Oxygen-Free Copper (OFC) conductors for enhanced signal clarity
- OFC spiral shields for effective EMI and RFI rejection and flexibility
Connectors: 3.5 mm TS to Same
Conductor: 26 AWG OFC
Shield: 85% OFC Spiral
Quantity: 8 pc
… Read more- Nickel-plated plugs for rugged durability and efficient signal transfer
- Oxygen-Free Copper (OFC) conductors for enhanced signal clarity
- OFC spiral shields for effective EMI and RFI rejection and flexibility
Connectors: 3.5 mm TS to Same
Conductor: 26 AWG OFC
Shield: 85% OFC Spiral
Quantity: 8 pc
3 in stock $20.71
People also bought...
Make Noise 3U 104HP Powered Modular Synthesiser Enclosure Case With AC Adaptor (modular synthesiser enclosure case)
Cat: 593467 Rel: 21 Dec 15
3U 104hp modular synthesiser enclosure case with built-in power
Notes: In 2009 Tony designed the first Skiff to complement the vertically oriented cases available at the time by providing an ergonomic enclosure for our Rene and Pressure Points touch controllers.
Today the Make Noise Skiff provides a smart way to build a small modular synthesizer. It is low cost, but extremely durable. The clean simple lines and matte black color place visual emphasis where the action is: the patch the artist has created. At one side there is a power button and the Make Noise logo is illuminated to show the power is ON.
Ships ready to use. Just add modules, patch cables, and inspiration.
… Read moreToday the Make Noise Skiff provides a smart way to build a small modular synthesizer. It is low cost, but extremely durable. The clean simple lines and matte black color place visual emphasis where the action is: the patch the artist has created. At one side there is a power button and the Make Noise logo is illuminated to show the power is ON.
Ships ready to use. Just add modules, patch cables, and inspiration.
1 in stock $247.52
Click for better price!
or call +44 20 7424 1960
quote 593467
quote 593467
People also bought...
4ms Pod40X 40HP Powered Synth Module Enclosure Case (synth module enclosure case)
Cat: 725502 Rel: 12 Apr 19
Portable, compact enclosure that turns Eurorack modules into table-top instruments
Notes: The Pod40X is 40HP with 2.00" (51mm) of available module depth. The built-in power supply has four power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.
Pods require a power brick. If you already have a powered Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain powered Pods.
The Pod40 includes ten (10) M3x8mm stainless steel screws and is compatible with M3 Knurlies.
… Read morePods require a power brick. If you already have a powered Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain powered Pods.
The Pod40 includes ten (10) M3x8mm stainless steel screws and is compatible with M3 Knurlies.
1 in stock $149.12
Click for better price!
or call +44 20 7424 1960
quote 725502
quote 725502
People also bought...
Notes: ALM Busy Circuits' Din-Sync Adapter cable lets users route "clock" and "run" Din-Sync signals via two 3.5mm mono jacks. It's a great way to sync one's Eurorack modular sequencer with external drum machines, synthesizers, and more.
… Read more 1 in stock $10.35
People also bought...
4ms 16-Pin Multi Power Cable (51cm) (synth module power cable)
Cat: 711994 Rel: 12 Dec 18
Flexible power cable for Eurorack modules
Notes: 16-conductor ribbon cable with four 16-pin connectors (20" total length), for connecting more than 2 modules in a Pod.
… Read more 2 in stock $7.00
People also bought...
Erica Synths 30cm Braided Patch Cables (white, pack of 5) (patch cables)
Cat: 838032 Rel: 21 Jul 21
Braided patch cables: white, 30cm, pack of 5
Notes: Set of 5 high-quality braided & soft 3.5mm patch cables for use with eurorack modules. The braided patch cables have a soft touch & are perfect for traveling with your eurorack system patched as they are super-bendable and much less likely to get tangled even with your case lid closed. Pleasant & practical for a better patching experience.
… Read more 1 in stock $10.35
People also bought...
Erica Synths 60cm Braided Patch Cables (black, pack of 5) (patch cables)
Cat: 838025 Rel: 21 Jul 21
Braided patch cables: black, 60cm, pack of 5
Notes: Set of 5 high-quality braided & soft 3.5mm patch cables for use with eurorack modules. The braided patch cables have a soft touch & are perfect for traveling with your eurorack system patched as they are super-bendable and much less likely to get tangled even with your case lid closed. Pleasant & practical for a better patching experience.
… Read more 2 in stock $13.98
People also bought...
Erica Synths 90cm Braided Patch Cables (red, pack of 5) (patch cables)
Cat: 838023 Rel: 21 Jul 21
Braided patch cables: red, 90cm, pack of 5
Notes: Set of 5 high-quality braided & soft 3.5mm patch cables for use with eurorack modules. The braided patch cables have a soft touch & are perfect for traveling with your eurorack system patched as they are super-bendable and much less likely to get tangled even with your case lid closed. Pleasant & practical for a better patching experience.
… Read more 1 in stock $16.06
People also bought...
Cat: 720435 Rel: 11 Feb 19
Bus stick, shrouded
Notes: Bus Sticks are low-profile, small footprint power distribution boards for powering up to 13 modules using shrouded (keyed) headers. Simply connect to a Row Power module using the included cable. Attaches to your case using adhesive pads (included) or by drilling and screwing.
… Read more 1 in stock $44.28
Click for better price!
or call +44 20 7424 1960
quote 720435
quote 720435
People also bought...
Intellijel Palette 62 4U x 62HP Stealth Powered Synth Module Case With 40W Meanwell PSU Adapter & MIDI Adapter Cable (black) (synth module case)
Cat: 739055 Rel: 05 Aug 19
4U Palette Case - black version
Notes: Your Palette case is the ideal solution for your space conscious and portable needs. At about the same size as a small laptop, your Palette fits comfortably on your desktop; in your backpack; at your favourite coffee shop; in your jam space; or pretty much anywhere else you might desire to play. Your imagination is the only limit. With 62hp of rack space, you can piece together powerful but focused mini systems and control surfaces. Intellijel's 1U row and built-in i/o ports add a ton of extra utility to bring the most out of your Eurorack modules. Truly a palette for the sonic artist.
Utilities panel:
- Dual 1:4 buffered multiple
- Two 1/4" balanced audio jacks that can be connected to the Stereo Line Out 1U, Pedal I/O 1U or Mixup
- 1/8" (6.35mm) MIDI Input that can be connected to uMIDI 1U
- USB port that connects to the uMIDI 1U and other future modules
- Rocker switch and barrel plug for power entry
Construction:
- Anodized aluminium
- Aluminium extruded rails with steel threaded inserts
- Rubber feet to protect your desktop
- Rear mounted power supply for maximum module depth
Includes:
- 40W Meanwell AC/DC adapter with right angled connector
- 3FT North American IEC power cable
- 1/8" (6.35mm) TRS to 5-Pin Din MIDI adapter
… Read moreUtilities panel:
- Dual 1:4 buffered multiple
- Two 1/4" balanced audio jacks that can be connected to the Stereo Line Out 1U, Pedal I/O 1U or Mixup
- 1/8" (6.35mm) MIDI Input that can be connected to uMIDI 1U
- USB port that connects to the uMIDI 1U and other future modules
- Rocker switch and barrel plug for power entry
Construction:
- Anodized aluminium
- Aluminium extruded rails with steel threaded inserts
- Rubber feet to protect your desktop
- Rear mounted power supply for maximum module depth
Includes:
- 40W Meanwell AC/DC adapter with right angled connector
- 3FT North American IEC power cable
- 1/8" (6.35mm) TRS to 5-Pin Din MIDI adapter
1 in stock $294.12
People also bought...
Erica Synths Patch Cable Holder (20cm) (patch cable holder)
Cat: 758855 Rel: 05 Dec 19
Patch cable holder
Notes: We wanted to organize patch cables that were hanging on all possible objects in our Lab, therefore we decided to make patch cable holders.
Rigid, 2mm aluminium powder coated cable holders can host over 100 patch cables in perfect order! Two screws for fixing the cable holder are included.
… Read moreRigid, 2mm aluminium powder coated cable holders can host over 100 patch cables in perfect order! Two screws for fixing the cable holder are included.
1 in stock $21.74
People also bought...
Qu-Bit Qu-Splitter 1 Input To 5 Output Cable splitter (black) (cable splitter)
Cat: 749028 Rel: 30 Sep 19
A 1 input to 5 output cable hub for splitting signals.
Notes: Qu-Splitter is a 1 input to 5 output cable hub for splitting signals. These are a great alternative to mult modules as they live outside of your case and take up 0HP. Very useful for common signals like master clock, modulation sources, or even to chain multiple cables together for long reach patching!
- 1 input to 5 outputs
- 0Passive mult
- Great for common signals like master clock, and modulation sources
- Connect two cables together for long reaches
- Color: Black with white artwork
… Read more- 1 input to 5 outputs
- 0Passive mult
- Great for common signals like master clock, and modulation sources
- Connect two cables together for long reaches
- Color: Black with white artwork
1 in stock $8.80
People also bought...
Erica Synths 90cm Braided Patch Cables (black, pack of 5) (patch cables)
Cat: 838020 Rel: 21 Jul 21
Braided patch cables: black, 90cm, pack of 5
Notes: Set of 5 high-quality braided & soft 3.5mm patch cables for use with eurorack modules. The braided patch cables have a soft touch & are perfect for traveling with your eurorack system patched as they are super-bendable and much less likely to get tangled even with your case lid closed. Pleasant & practical for a better patching experience.
… Read more 1 in stock $15.27
People also bought...
Cat: 801522 Rel: 20 Nov 20
Pack of 3.5mm yellow patch cables
Notes: Unique custom design 3.5mm patch cables.
They feature strong, ergonomic barrels which are slim and stubby for max patchability.
Available in various lengths (15, 30, 60, 90 & 120cm) and colours.
Longer 60, 90 & 120 lengths also include ALM cable tie.
… Read moreThey feature strong, ergonomic barrels which are slim and stubby for max patchability.
Available in various lengths (15, 30, 60, 90 & 120cm) and colours.
Longer 60, 90 & 120 lengths also include ALM cable tie.
2 in stock $12.42
People also bought...
Cat: 758067 Rel: 09 Dec 19
3.5mm patch cables for Eurorack modular synths
Notes: Custom ALM patch cables. Small but strong, they are designed for maximum ergonomic post modern wiggling.
- 60cm (Pack of 5 + ALM branded tie)
- Colour: Purple
… Read more- 60cm (Pack of 5 + ALM branded tie)
- Colour: Purple
1 in stock $12.42
People also bought...
Doepfer A-100B4v Vintage Blank Panel 4TE (black) (blank panel)
Cat: 731210 Rel: 29 May 19
Robust, blank front panel for use with modular racks & other applications - 4HP wide
Notes: Blank panel, 4HP, constructed from anodised aluminium, black.
… Read more More than 10 in stock $7.00
People also bought...
Doepfer A-100B8v Vintage Blank Panel 8TE (black) (blank panel)
Cat: 731211 Rel: 29 May 19
Robust, blank front panel for use with modular racks & other applications - 8HP wide
Notes: Blank panel, 8HP, constructed from anodised aluminium, black.
… Read more 2 in stock $8.28
People also bought...
Electrosmith M2.5 Synth Module Screws (pack of 50) (synth module screws)
Cat: 714419 Rel: 31 Dec 18
Pack of 50 cross head M2.5 eurorack screws
Notes: M2.5 screws have gained popularity in the US with manufacturers such as Elite, Make Noise, and anyone using Vector rails.
… Read more 1 in stock $8.03
People also bought...
Erica Synths 60cm Braided Patch Cables (white, pack of 5) (patch cables)
Cat: 838027 Rel: 21 Jul 21
Braided patch cables: white, 60cm, pack of 5
Notes: Set of 5 high-quality braided & soft 3.5mm patch cables for use with eurorack modules. The braided patch cables have a soft touch & are perfect for traveling with your eurorack system patched as they are super-bendable and much less likely to get tangled even with your case lid closed. Pleasant & practical for a better patching experience.
… Read more 1 in stock $13.98
People also bought...
Cat: 758064 Rel: 09 Dec 19
3.5mm patch cables for Eurorack modular synths
Notes: Custom ALM patch cables. Small but strong, they are designed for maximum ergonomic post modern wiggling.
- 15cm (Pack of 5)
- Colour: Yellow
… Read more- 15cm (Pack of 5)
- Colour: Yellow
1 in stock $9.84
People also bought...
4ms Pod20 20HP Powered Synth Module Enclosure Case (synth module enclosure case)
Cat: 706834 Rel: 12 Dec 18
20HP metal enclosure for Eurorack modules with built-in power supply
Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.
The Pod20 is 20HP with 1.34" (34mm) of available module depth. The built-in power supply has two power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.
Pods require a power brick. If you already have a powered Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain powered Pods.
The Pod20 includes ten (10) M3x8mm stainless steel screws and is compatible with M3 Knurlies.
… Read moreThe Pod20 is 20HP with 1.34" (34mm) of available module depth. The built-in power supply has two power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.
Pods require a power brick. If you already have a powered Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain powered Pods.
The Pod20 includes ten (10) M3x8mm stainless steel screws and is compatible with M3 Knurlies.
1 in stock $103.56
Click for better price!
or call +44 20 7424 1960
quote 706834
quote 706834
People also bought...
4ms Pod60 60HP Powered Synth Module Enclosure Case (synth module enclosure case)
Cat: 711005 Rel: 12 Dec 18
60HP metal enclosure for Eurorack modules with built-in power supply
Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.
The Pod60 is 60HP with 1.34" (34mm) of available module depth. The built-in power supply has four power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.
Pods require a power brick. If you already have a powered Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain powered Pods.
The Pod60 includes twenty (20) M3x8mm stainless steel screws and is compatible with M3 Knurlies.
… Read moreThe Pod60 is 60HP with 1.34" (34mm) of available module depth. The built-in power supply has four power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.
Pods require a power brick. If you already have a powered Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain powered Pods.
The Pod60 includes twenty (20) M3x8mm stainless steel screws and is compatible with M3 Knurlies.
! low stock $162.60
Click for better price!
or call +44 20 7424 1960
quote 711005
quote 711005
People also bought...
Erica Synths 30cm Braided Patch Cables (black, pack of 5) (patch cables)
Cat: 838029 Rel: 21 Jul 21
Braided patch cables: black, 30cm, pack of 5
2 in stock $10.87
