安全购物

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

安全购物

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Synth module accessories

View:
Options
Items 1 to 50 of 63 on page 1 of 2
1  2  »
Subscribe to our weekly Studio Equipment emails
4ms 10 Pin Multi Power Cable (Eurorack power cable)
Cat: 711993 Rel: 12 Dec 18
 
Flexible power cable for Eurorack modules
Notes: 10-conductor ribbon cable with three 10-pin connectors and a 16-pin connector on one end (20" total length), for connecting more than 2 modules in a Pod.
Read more
 3 in stock $5.95
Cat: 725500 Rel: 15 Apr 19
 
Official 10HP 4ms blank panel
Notes: Make Noise blank panel - 10HP width. Black coloured PCB material with Make Noise logo.
Read more
 2 in stock $7.84
4ms 16 Pin Multi Power Cable (Eurorack power cable)
Cat: 711994 Rel: 12 Dec 18
 
Flexible power cable for Eurorack modules
Notes: 16-conductor ribbon cable with four 16-pin connectors (20" total length), for connecting more than 2 modules in a Pod.
Read more
 1 in stock $6.00
Cat: 725495 Rel: 15 Apr 19
 
Official 1HP 4ms blank panel
Notes: Make Noise blank panel - 1HP width. Black coloured PCB material with Make Noise logo.
Read more
 1 in stock $4.60
Cat: 720435 Rel: 11 Feb 19
 
Bus stick, shrouded
Notes: Bus Sticks are low-profile, small footprint power distribution boards for powering up to 13 modules using shrouded (keyed) headers. Simply connect to a Row Power module using the included cable. Attaches to your case using adhesive pads (included) or by drilling and screwing.
Read more
 3 in stock $37.32
Cat: 720436 Rel: 11 Feb 19
 
Two 14" flying bus cables with a total of 14 male header pins
Notes: Flying Bus (male pin) are passive power distribution cables that work with the Row Power to distribute power to your modules. Can be daisy-chained if extra headers are needed.
Read more
 2 in stock $28.94
Cat: 706834 Rel: 12 Dec 18
 
20HP metal enclosure for Eurorack modules with built-in power supply
Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod20 is 20HP with 1.34" (34mm) of available module depth. The built-in power supply has two power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.

Pods require a power brick. If you already have a powered Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain powered Pods.

The Pod20 includes ten (10) M3x8mm stainless steel screws and is compatible with M3 Knurlies.
Read more
 2 in stock $90.86
Cat: 706833 Rel: 12 Dec 18
 
20HP metal enclosure for Eurorack modules
Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod20 Unpowered is 20HP with 1.34" (34mm) of available module depth. No power supply is included, you must supply your means of powering modules with a DIY power supply or a front-facing module such as the Row Power. Two holes on the rear face are plugged with removable plastic plugs, and can be used for DIY applications.
Read more
 1 in stock $48.41
Cat: 706837 Rel: 12 Dec 18
 
26HP metal enclosure for Eurorack modules with built-in power supply
Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod26 is 26HP with 1.34" (34mm) of available module depth. The built-in power supply has two power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.

Pods require a power brick. If you already have a powered Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain powered Pods.

The Pod26 includes ten (10) M3x8mm stainless steel screws and is compatible with M3 Knurlies.
Read more
 1 in stock $101.67
Cat: 706836 Rel: 12 Dec 18
 
26HP metal enclosure for Eurorack modules
Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod26 Unpowered is 26HP with 1.34" (34mm) of available module depth. No power supply is included, you must supply your means of powering modules with a DIY power supply or a front-facing module such as the Row Power. Two holes on the rear face are plugged with removable plastic plugs, and can be used for DIY applications.
Read more
 2 in stock $53.01
Cat: 706840 Rel: 12 Dec 18
 
32HP metal enclosure for Eurorack modules with built-in power supply
Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod32 is 32HP with 1.34" (34mm) of available module depth. The built-in power supply has two power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.

Pods require a power brick. If you already have a powered Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain powered Pods.

The Pod32 includes ten (10) M3x8mm stainless steel screws and is compatible with M3 Knurlies.
Read more
 2 in stock $110.33
Cat: 706839 Rel: 12 Dec 18
 
32HP metal enclosure for Eurorack modules
Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod32 Unpowered is 32HP with 1.34" (34mm) of available module depth. No power supply is included, you must supply your means of powering modules with a DIY power supply or a front-facing module such as the Row Power. Two holes on the rear face are plugged with removable plastic plugs, and can be used for DIY applications.
Read more
 2 in stock $53.01
Cat: 725503 Rel: 12 Apr 19
 
Portable, compact enclosure that turns Eurorack modules into table-top instruments
Notes: The Pod40X Unpowered is 40HP with 2" (51mm) of available module depth. No power supply is included, you must supply your means of powering modules with a DIY power supply or a front-facing module such as the Row Power. Two holes on the rear face are plugged with removable plastic plugs, and can be used for DIY applications.
Read more
 1 in stock $71.38
Cat: 725517 Rel: 12 Apr 19
 
Portable, compact enclosure that turns Eurorack modules into table-top instruments
Notes: The Pod48X is 48HP with 2.00" (51mm) of available module depth. The built-in power supply has four power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.

Pods require a power brick. If you already have a powered Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain powered Pods.

The Pod48X includes ten (10) M3x8mm stainless steel screws and is compatible with M3 Knurlies.
Read more
 4 in stock $155.76
Cat: 725518 Rel: 12 Apr 19
 
Portable, compact enclosure that turns Eurorack modules into table-top instruments
Notes: The Pod40X Unpowered is 48HP with 2" (51mm) of available module depth. No power supply is included, you must supply your means of powering modules with a DIY power supply or a front-facing module such as the Row Power. Two holes on the rear face are plugged with removable plastic plugs, and can be used for DIY applications.
Read more
 2 in stock $71.38
Cat: 711005 Rel: 12 Dec 18
 
60HP metal enclosure for Eurorack modules with built-in power supply
Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod60 is 60HP with 1.34" (34mm) of available module depth. The built-in power supply has four power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.

Pods require a power brick. If you already have a powered Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain powered Pods.

The Pod60 includes twenty (20) M3x8mm stainless steel screws and is compatible with M3 Knurlies.
Read more
 2 in stock $159.01
Cat: 711004 Rel: 12 Dec 18
 
60HP metal enclosure for Eurorack modules
Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod60 Unpowered is 60HP with 1.34" (34mm) of available module depth. No power supply is included, you must supply your means of powering modules with a DIY power supply or a front-facing module such as the Row Power. Two holes on the rear face are plugged with removable plastic plugs, and can be used for DIY applications.
Read more
 2 in stock $79.51
Cat: 725489 Rel: 15 Apr 19
 
Right angle 2.1mm barrel plug
Notes: Right angle 2.1mm barrel plug (5.5mm outer diameter, positive tip). Short barrel to barrel cable for daisy-chaining Row Powers and/or Pods. Cable is 11" long (centre of tip to centre of tip), suitable for two Pods next to each other or in front/behind each other. Also compatible with Row Power modules.

Both ends of the cable have a right-angle plug.
Read more
 5 in stock $5.40
Cat: 739913 Rel: 20 Sep 19
 
Pack of 25 Bananuts in black colour
Notes: Bananuts are anodized aluminium custom minijack nuts, following Buchla/Serge colouring code: Blue, purple, red, orange, yellow, white, green and black. Perfect lovely thingies to pimp your modular, code your inputs and outputs with colours or just give a touch of beauty to your favourite gear!
Read more
 1 in stock $11.90
Cat: 739906 Rel: 20 Sep 19
 
Pack of 25 Bananuts in blue colour
Notes: Bananuts are anodized aluminium custom minijack nuts, following Buchla/Serge colouring code: Blue, purple, red, orange, yellow, white, green and black. Perfect lovely thingies to pimp your modular, code your inputs and outputs with colours or just give a touch of beauty to your favourite gear!
Read more
 5 in stock $11.90
Cat: 739912 Rel: 20 Sep 19
 
Pack of 25 Bananuts in green colour
Notes: Bananuts are anodized aluminium custom minijack nuts, following Buchla/Serge colouring code: Blue, purple, red, orange, yellow, white, green and black. Perfect lovely thingies to pimp your modular, code your inputs and outputs with colours or just give a touch of beauty to your favourite gear!
Read more
 4 in stock $11.90
Cat: 739909 Rel: 20 Sep 19
 
Pack of 25 Bananuts in orange colour
Notes: Bananuts are anodized aluminium custom minijack nuts, following Buchla/Serge colouring code: Blue, purple, red, orange, yellow, white, green and black. Perfect lovely thingies to pimp your modular, code your inputs and outputs with colours or just give a touch of beauty to your favourite gear!
Read more
 5 in stock $11.90
Cat: 739907 Rel: 20 Sep 19
 
Pack of 25 Bananuts in purple colour
Notes: Bananuts are anodized aluminium custom minijack nuts, following Buchla/Serge colouring code: Blue, purple, red, orange, yellow, white, green and black. Perfect lovely thingies to pimp your modular, code your inputs and outputs with colours or just give a touch of beauty to your favourite gear!
Read more
 5 in stock $11.90
Cat: 739908 Rel: 20 Sep 19
 
Pack of 25 Bananuts in red colour
Notes: Bananuts are anodized aluminium custom minijack nuts, following Buchla/Serge colouring code: Blue, purple, red, orange, yellow, white, green and black. Perfect lovely thingies to pimp your modular, code your inputs and outputs with colours or just give a touch of beauty to your favourite gear!
Read more
 3 in stock $11.90
Cat: 739911 Rel: 20 Sep 19
 
Pack of 25 Bananuts in white colour
Notes: Bananuts are anodized aluminium custom minijack nuts, following Buchla/Serge colouring code: Blue, purple, red, orange, yellow, white, green and black. Perfect lovely thingies to pimp your modular, code your inputs and outputs with colours or just give a touch of beauty to your favourite gear!
Read more
 4 in stock $11.90
Cat: 739910 Rel: 20 Sep 19
 
Pack of 25 Bananuts in yellow colour
Notes: Bananuts are anodized aluminium custom minijack nuts, following Buchla/Serge colouring code: Blue, purple, red, orange, yellow, white, green and black. Perfect lovely thingies to pimp your modular, code your inputs and outputs with colours or just give a touch of beauty to your favourite gear!
Read more
 4 in stock $11.90
Cat: 725975 Rel: 15 Jul 19
 
Passive 1 to 2 splitter or 2 to 1 mixer
Notes: Whether you are mixing control voltage signals for more interesting modulations or just copying an audio signal for parallel processing, SPLIX is a handy addition to your arsenal of Eurorack tools.

Functioning as either a mixer or splitter, its small lightweight form-factor means it can fit nearly anywhere without weighing down your patch. The thumb-wheel controls the crossfader balance of two inputs, or the level ratio between two outputs. SPLIX also functions as a passive inline attenuator when using only one input and one output.
Read more
 1 in stock $16.22
Cat: 725970 Rel: 15 Jul 19
 
Passive 1 to 2 splitter or 2 to 1 mixer
Notes: Whether you are mixing control voltage signals for more interesting modulations or just copying an audio signal for parallel processing, SPLIX is a handy addition to your arsenal of Eurorack tools.

Functioning as either a mixer or splitter, its small lightweight form-factor means it can fit nearly anywhere without weighing down your patch. The thumb-wheel controls the crossfader balance of two inputs, or the level ratio between two outputs. SPLIX also functions as a passive inline attenuator when using only one input and one output.
Read more
 2 in stock $16.22
Cat: 725974 Rel: 15 Jul 19
 
Passive 1 to 2 splitter or 2 to 1 mixer
Notes: Whether you are mixing control voltage signals for more interesting modulations or just copying an audio signal for parallel processing, SPLIX is a handy addition to your arsenal of Eurorack tools.

Functioning as either a mixer or splitter, its small lightweight form-factor means it can fit nearly anywhere without weighing down your patch. The thumb-wheel controls the crossfader balance of two inputs, or the level ratio between two outputs. SPLIX also functions as a passive inline attenuator when using only one input and one output.
Read more
 1 in stock $16.22
Cat: 725967 Rel: 15 Jul 19
 
Passive 1 to 2 splitter or 2 to 1 mixer
Notes: Whether you are mixing control voltage signals for more interesting modulations or just copying an audio signal for parallel processing, SPLIX is a handy addition to your arsenal of Eurorack tools.

Functioning as either a mixer or splitter, its small lightweight form-factor means it can fit nearly anywhere without weighing down your patch. The thumb-wheel controls the crossfader balance of two inputs, or the level ratio between two outputs. SPLIX also functions as a passive inline attenuator when using only one input and one output.
Read more
 3 in stock $16.22
Cat: 731212 Rel: 29 May 19
 
Robust, blank front panel for use with modular racks & other applications - 42HP wide
Notes: Blank panel, 42HP (10mm), constructed from anodised aluminium, black.
Read more
 1 in stock $17.58
Cat: 743113 Rel: 20 Aug 19
 
Compact budget Eurorack case
Notes: The A-100LC1v is a smaller version of the A-100LC3 with 48 HP of space. It is made out of raw wood, a black coating gives the Eurorack frame a vintage look. The built-in power supply, type A-100SSB, delivers up to 380 mA at +12 V and -12 V as well as 100 mA at +5 V.

The A-100LC1v comes equipped with one 48 HP measuring row for 3U modules. Its power supply features eight connectors for oscillators, filters and so forth. The case is connected to the grid via an IEC power socket.
Read more
 2 in stock $143.86
Cat: 714422 Rel: 31 Dec 18
 
10-16 pin power cable
Notes: Standard Eurorack power cable.

Use the 10-16 variant for most modules. 16-16 is for modules that use the internal +5V rail.

Length: 25CM (9.8")
Read more
 More than 10 in stock $1.07
Cat: 714419 Rel: 31 Dec 18
 
Pack of 50 cross head M2.5 eurorack screws
Notes: M2.5 screws have gained popularity in the US with manufacturers such as Elite, Make Noise, and anyone using Vector rails.
Read more
 2 in stock $3.23
Cat: 714415 Rel: 31 Dec 18
 
Single cross head M2.5 screw - 7mm long
Notes: M2.5 screws have gained popularity in the US with manufacturers such as Elite, Make Noise, and anyone using Vector rails.
Read more
 2 in stock $3.23
Cat: 714409 Rel: 31 Dec 18
 
Pack of 50 cross head M3 eurorack screws
Notes: M3 is the original mounting screw as specified by Doepfer in the Eurorack specification. M3 screws are used in cases by Doepfer, TipTop, Intellijel and others.
Read more
 2 in stock $3.52
Cat: 714405 Rel: 31 Dec 18
 
Single cross head M3 screw - 7mm long
 1 in stock $3.23
Cat: 714403 Rel: 31 Dec 18
 
Screwdriver with reversible phillips and flat head types
Notes: Screwdriver with reversible phillips and flat head types.

Fits both Eurorack screw sizes: M3 and M2.5.
Read more
 1 in stock $4.86
Cat: 725949 Rel: 15 Apr 19
 
3U 40HP compact skiff case including PSU
Notes: The Mini Case offers 40 HP for mounting modules. A power supply is built-in.

208 mm long x 45mm deep.

PLEASE NOTE: Comes with EU 2 pin plug only - UK adapter may be required.
Read more
 2 in stock $115.74
Cat: 738777 Rel: 29 Jul 19
 
6U 104HP black Eurorack case
Notes: Supplied with an incorporated power supply fixed on the left side of the box.

Sides are made of 5mm thick Plexiglas.

The frame is made of aluminium with a sanded black finish for less scratches.

Rails are black.

- 104HP
- Depth of the box: 6cm
- Depth of the box along the 5HP of the power supply: 4cm
- Power consumption: +12V : 1.5A ; -12V : 1A ; +5V : 0.5A
Read more
 1 in stock $324.51
Cat: 729411 Rel: 29 May 19
 
Flying bus cable for TRAX!
Notes: The Flying Bus power cable allows multiple TRAX modules connected to this cable to share MIDI data with one another and also receive the proper power from the system, without connecting MIDI signals to other modules in your system.

Use when connecting multiple TRAX together to share MIDI Data. Also provides necessary power to additional TRAX units.

7 x 16-pin Eurorack headers.
Read more
 2 in stock $12.97
Cat: 739052 Rel: 19 Jul 19
 
Bi-directional audio board with four TRS jacks for 7U cases
Notes: The new, 2nd generation Audio Jacks Board comes pre-installed in every Intellijel 7U case manufactured since early 2019. Because this board is more fully featured than the previous generation, it's available as a stand-alone component for anyone who wishes to update an older 7U case.

You can tell which board you have by looking at the connectors. The new Audio Jacks Board has a large shrouded header flanked by two smaller shrouded headers, flanked by two link connectors at either end. Older boards have only one connector along the bottom edge.

The board holds four Neutrik TRS jacks, each of which can be configured as either an input or an output depending on the modules you connect. This allows you maximum flexibility when configuring your case - whether you wish to use the audio jacks as outputs, inputs, sends & returns; or some combination of these.

The jacks carry different audio signals depending on what you connect to the Audio Jacks Board. Please refer to the manual for more details on the many options available.
Read more
 1 in stock $29.48
Notes: Your Palette case is the ideal solution for your space conscious and portable needs. At about the same size as a small laptop, your Palette fits comfortably on your desktop; in your backpack; at your favourite coffee shop; in your jam space; or pretty much anywhere else you might desire to play. Your imagination is the only limit. With 62hp of rack space, you can piece together powerful but focused mini systems and control surfaces. Intellijel's 1U row and built-in i/o ports add a ton of extra utility to bring the most out of your Eurorack modules. Truly a palette for the sonic artist.

Utilities panel:

- Dual 1:4 buffered multiple
- Two 1/4" balanced audio jacks that can be connected to the Stereo Line Out 1U, Pedal I/O 1U or Mixup
- 1/8" (6.35mm) MIDI Input that can be connected to uMIDI 1U
- USB port that connects to the uMIDI 1U and other future modules
- Rocker switch and barrel plug for power entry

Construction:

- Anodized aluminium
- Aluminium extruded rails with steel threaded inserts
- Rubber feet to protect your desktop
- Rear mounted power supply for maximum module depth

Includes:

- 40W Meanwell AC/DC adapter with right angled connector
- 3FT North American IEC power cable
- 1/8" (6.35mm) TRS to 5-Pin Din MIDI adapter
Read more
 1 in stock $311.54
Cat: 712003 Rel: 30 Nov 18
 
Synth module bus cable
Notes: The Isolated Select Bus Cable can be used to connect a Rene 2 and a Tempi directly.
Read more
 2 in stock $4.32
Cat: 726849 Rel: 04 Apr 19
 
5 x Make Noise style rogan knobs, large
Notes: Make Noise knobs.
Read more
 1 in stock $13.25
Cat: 726846 Rel: 04 Apr 19
 
10 x Make Noise style rogan knobs, medium
Notes: Make Noise knobs.
Read more
 1 in stock $17.85
Cat: 726844 Rel: 04 Apr 19
 
5 x Make Noise style rogan knobs, small
Notes: Make Noise knobs.
Read more
 3 in stock $12.97
Cat: 732130 Rel: 30 Sep 19
 
Desktop Eurorack enclosure
Notes: A beautiful 96hp Eurorack enclosure shaped with the warmth of walnut and the strength of steel. The Lifeforms Research Console Eurorack format modular case pairs classic desktop synthesiser ergonomics with a modern Eurorack form factor and reliable power supply. The Lifeforms Research Console was designed for the Voltage Research Laboratory but is the perfect enclosure for all desktop modular sound experiments.
Read more
MRP:$443.95 SAVE 17%
 4 in stock $369.96
Cat: 749028 Rel: 30 Sep 19
 
1 input to 5 output cable hub for splitting signals
Notes: Qu-Splitter is a 1 input to 5 output cable hub for splitting signals. These are a great alternative to mult modules as they live outside of your case and take up 0HP. Very useful for common signals like master clock, modulation sources, or even to chain multiple cables together for long reach patching!
Read more
 2 in stock $5.40
Cat: 719530 Rel: 13 Feb 19
 
Precision machined solid oak end cheeks for the Arturia Keystep
Notes: Custom made Solid Oak Arturia Keystep stand with additional 94 HP Eurorack rails - precision machined to give a snug fit for the Arturia Keystep.

The Keystep sits in a recess to stop it from moving or sliding, gripped by the sides which forms a strong and sturdy stand. The oak has been oiled and is ready to assemble and should stay looking beautiful for a long time.
Read more
 1 in stock $107.08
Items 1 to 50 of 63 on page 1 of 2
1  2  »

Filter

Synth module accessories
商品
Release Date
Featured
Close