Synth Module Accessories

Notes: The Pod48X is 48HP with 2.00" (51mm) of available module depth. The built-in power supply has four power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.

Pods require a power brick. If you already have a powered Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain powered Pods.

The Pod48X includes ten (10) M3x8mm stainless steel screws and is compatible with M3 Knurlies.

Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod60 is 60HP with 1.34" (34mm) of available module depth. The built-in power supply has four power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.

Pods require a power brick. If you already have a powered Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain powered Pods.

The Pod60 includes twenty (20) M3x8mm stainless steel screws and is compatible with M3 Knurlies.

Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod64X is 64HP with 2.16" (55mm) of available module depth. The built-in power supply has four power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.

Pods require a power brick, or a barrel cable to daisy-chain to a Pod or Row Power that's already powered.

Pods are a perfect way to get started in Eurorack, or add a couple more modules to your monster system!

Made from 100% anodized aluminum, Pods are light, tough and perfect for on-the-go set ups. The power supply can handle up to 1.4A of +12V, which is plenty of juice for even the most modern digital modules. (Or if you prefer to DIY your power supply, Pods are also available unpowered)

Each Pod64X typically will house up to six modules, but more can be accommodated using a multi-power cable accessory.

Mix and match your Pods with desktop synths, effect pedals, drum machines or any musical gear for a flexible modular system. Pods can even daisy- chain with the 4ms Row Power system making them a convenient outboard mini-skiff. Need to add another module? Just add a Pod! Need to pack light for a live set? Just grab the Pods you need and go!

Basic Features:

64 HP of Eurorack modular space
Extra room for deep modules
Standard M3 threaded holes
100% lightweight anodized aluminum
Built-in Power supply
Red, White, and Blue LED power indicators

Includes:

64HP Pod, black anodized aluminum
Built-in power supply with six Eurorack power headers
Extra deep (2.16"/55mm) fits virtually every Eurorack module
M3 x 8mm pan-head screws, stainless steel (20)
Adhesive rubber feet (4)
Does not include barrel cable or power brick
Power Supply:

Four 16-pin Eurorack power shrouded headers
+12V max 1.4A
-12V max 0.67A
+5V max 1.0A
Power input: Two barrel jacks for daisy-chaining
15V-20VDC, 2.1mm positive tip
Exterior dimensions:
Width: 329.7mm (12.98")
Height: 159.5mm (6.28")
Depth: 57mm (2.24")
Interior dimensions:
Max module depth: 55mm (2.16")
Module width: 64HP
Weight:
0.5 kg = 17 oz

Notes: ***B-STOCK: Box opened, product in perfect working order***


ALM Eurorack cases are available in a range of sizes all including an integrated powered bus boards.

The cases all feature anodised aluminium construction, an on/off switch, rubber feet, and high quality switched powered bus boards with numerous keyed headers and ample power capacity.

These are simple and compact Eurorack cases, perfect for small, focused systems, taking along on travels, or as a tabletop addition to a larger setup.

Cases are available in 4 sizes; 3U 84HP / 6U 84HP / 3U 52HP / 6U 52HP sizes. They all offer 1 Amp on both the -12V and +12V rails per row.

Great modern cases

The ALM powered Eurorack case was originally designed for the System Coupe. Wider interest has seen it evolve into a range of different sized cases being made available by themselves.

A fixed solid bus board provides quality ample power and plentiful keyed power connectors. The shielded DC/DC power converter is low noise and includes overload and short circuit protection. Fixed, quality mounting rails are used over sometimes frustrating sliding nuts. The case has a great looking all anodised aluminium construction that is both strong and light.

The case proportions are designed to look great on a table or desk (not too deep, just enough) and also be easy to fit in a bag and transport.

Decksaver case covers are available currently for the 3U/84HP, 6U/52HP, and 6U/84HP cases.

3U / 52 HP

Provides up to 1 Amp power on each -12V & +12V rails.
Connections for up to 9 modules.
Includes 2 Amp power 'brick'

Notes: At 84hp wide the NiftyCASE isn't super tiny or super huge, in fact, it's just right for all of the cardboard boxes bought to ship it to you in. Aside from the 84hp width NiftyCASE features ample +12v -12v and +5v power for your modules. It will also take Din MIDI from any DIN MIDI device and USB MIDI from your computer and turn it into eurorack compatible CV, gate, mod, and clock.

MIDI to CV, gate, clock, and mod

It's all built into the case. Make your instrument and don't waste precious hp (space for modules) on power and MIDI tools. you can plug NiftyCASE into your computer via USB or 5pin MIDI DIN device and send it MIDI. It will convert it into CV, gate, mod, and clock. Sequence with your DAW, jam with your controllers, or do something wacky, NiftyCASE has got you covered.

Power

Built-in power saves space for more of your modules, and keeps things good and easy.

As is, you can plug up to 10 modules into NiftyCASE's 10 gang flying bus that provides a peak 1500mA of +12v, 500mA -12v, and 500mA +5v, covering all industry standard power requirements

Specs:
Useable case area = 84hp
Internal depth = 55mm
Weight = 1.8kg
6.8cm x 44.6cm x 18.6cm
Range of cv out 1 = 0-10V
Range of cv out 2 = 0-10V
Voltage output gate 1 - off =0 on =5(off = 0 on = 4.65)
Voltage output gate 2 - off =0 on =5(off = 0 on = 4.65)
Voltage output mod = 1-10V
Voltage output clock - off =0 on =5
Power output for modules
+12V - 1500mA peak output**
-12V - 500mA peak output**
+5V - 500mA peak output**
1/4" ts mono output on rear
MIDI in via USB and 5 pin Din
MIDI thru via 5 Pin Din and USB

Included in the box:

NiftyCASE
NiftyCASE switching power supply with blades for NA, EU, UK, and AU

* Please note that the right and left sides of NiftyCASE fit very flush. It is recommended to favour a module with a pcb 1mm or more narrower than it's front panel for use on the left and right sides of the case (this amount or more of tolerance is fairly common on many modules).

** The NiftyCASE power supply is designed only to power modules that are being used in the NiftyCASE. Modifying the case or using it otherwise to power external cases & external modules is not advised.

Notes: ***B-STOCK: Product has light surface marks/scratches, but otherwise in perfect working condition***


At 84hp wide the NiftyCASE isn't super tiny or super huge, in fact, it's just right for all of the cardboard boxes bought to ship it to you in. Aside from the 84hp width NiftyCASE features ample +12v -12v and +5v power for your modules. It will also take Din MIDI from any DIN MIDI device and USB MIDI from your computer and turn it into eurorack compatible CV, gate, mod, and clock.

MIDI to CV, gate, clock, and mod

It's all built into the case. Make your instrument and don't waste precious hp (space for modules) on power and MIDI tools. you can plug NiftyCASE into your computer via USB or 5pin MIDI DIN device and send it MIDI. It will convert it into CV, gate, mod, and clock. Sequence with your DAW, jam with your controllers, or do something wacky, NiftyCASE has got you covered.

Power

Built-in power saves space for more of your modules, and keeps things good and easy.

As is, you can plug up to 10 modules into NiftyCASE's 10 gang flying bus that provides a peak 1500mA of +12v, 500mA -12v, and 500mA +5v, covering all industry standard power requirements

Specs:
Useable case area = 84hp
Internal depth = 55mm
Weight = 1.8kg
6.8cm x 44.6cm x 18.6cm
Range of cv out 1 = 0-10V
Range of cv out 2 = 0-10V
Voltage output gate 1 - off =0 on =5(off = 0 on = 4.65)
Voltage output gate 2 - off =0 on =5(off = 0 on = 4.65)
Voltage output mod = 1-10V
Voltage output clock - off =0 on =5
Power output for modules
+12V - 1500mA peak output**
-12V - 500mA peak output**
+5V - 500mA peak output**
1/4" ts mono output on rear
MIDI in via USB and 5 pin Din
MIDI thru via 5 Pin Din and USB

Included in the box:

NiftyCASE
NiftyCASE switching power supply with blades for NA, EU, UK, and AU

* Please note that the right and left sides of NiftyCASE fit very flush. It is recommended to favour a module with a pcb 1mm or more narrower than it's front panel for use on the left and right sides of the case (this amount or more of tolerance is fairly common on many modules).

** The NiftyCASE power supply is designed only to power modules that are being used in the NiftyCASE. Modifying the case or using it otherwise to power external cases & external modules is not advised.

Notes: The A-100LC1 is very similar to the A-100LC3 but offers only 48 HP for installation of modules. A-100LC3 is equipped with the power supply A-100SSB.

The case is made of raw wood without lacquering. The case can be varnished by the customer in any desired colour e.g. by means of a spray can.

Quantity of bus boards: 1 (short version with 8 module connectors)

Notes: The A-100LC1v is a smaller version of the A-100LC3 with 48 HP of space. It is made out of raw wood, a black coating gives the Eurorack frame a vintage look. The built-in power supply, type A-100SSB, delivers up to 380 mA at +12 V and -12 V as well as 100 mA at +5 V.

The A-100LC1v comes equipped with one 48 HP measuring row for 3U modules. Its power supply features eight connectors for oscillators, filters and so forth. The case is connected to the grid via an IEC power socket.

Notes: Desktop Eurorack moduile case 3U - 84HP with power supply on the left side.

Plexiglas side panels 5mm thick.

Aluminium chassis.

6cm deep, but only 4cm deep all along the 5HP of the power supply. Check your modules before!

Tech specs:
- Width : 84HP
- Depth : 6cm
- Depth all along the 5HP of the power supply : 4cm
- Current Consumption : +12V : 2.4A ; -12V : 1.2A ; +5V : 0.5A

Notes: ***B-STOCK: Without original PSU, box opened. product in full working order***


Small desktop enclosure for Eurorack modules with 42 HP space and a maximum depth of 32mm. A relatively strong power solution with an external power supply and an on/off switch located at the case is included.

The power supply provides:

- 850 mA at +12V
- 850mA at -12V
- 500mA at +5V

The power distribution has 14 connectors and the case can house exactly fourteen modules from Erica's Pico Series.

Notes: Small desktop enclosure for Eurorack modules with 42 HP space and a maximum depth of 32mm. A relatively strong power solution with an external power supply and an on/off switch located at the case is included.

The power supply provides:

- 850 mA at +12V
- 850mA at -12V
- 500mA at +5V

The power distribution has 14 connectors and the case can house exactly fourteen modules from Erica's Pico Series.

Notes: The Minicase by Flame is made of bamboo wood and is offered in a limited edition.

Modules up to a depth of 5.3 cm can be installed in the case. For example, the Fire Drum Synth Module and the Takt Rhythm Sequencer.

Technical data:

Module width: 56TE
Installation depth: 5,3cm
Outer dimensions: 30x15x6cm
6x 16pin Doepfer connectors for modules
Plug-in power supply with DIN connector:
110-230VAC 28W, with +5V/2,5A +12V/1A -12V/0,3

HP : 56

Notes: Loci Bundl5

One of everything! A Classic, Dinky, Expander, Accessory and XL
5 Stands to give you the most versatility
Assembled in seconds
Multiple configurations for a number of layout options up to 3 tiers!
Super strong.
Precision laser cut from 6mm oak veneer
Non-slip pads
Packs flat to slide in your case.

Notes: Introducing the special edition Pod20 customized for ModBap Modular by 4ms, the Modbap20.

The Modbap20 Powered Eurorack Case can be your on-ramp to eurorack, a great option for a focused mini system, or a live control surface, or the perfect way to expand a larger system. The Modbap20 is 20HP in width, and 34mm deep with 4ms power bus boards. The included power brick and your favorite combination of up to 20HP modules are all you need to get started with your new mini system, control pod, performance pod, effects pod, or whatever you so desire.

Features

20HP wide, 34mm deep powered Eurorack case
power brick (included)
Available power: 0.7A (+12V), 0.28A (-12V), 0.2A (+5V)
Rugged anodized aluminum construction

Notes: EcoSynth is a small, portable Eurorack modular case solution, designed for your desktop! It's a practical solution designed to save your hard-earned cash for modules. If you're looking for a small desktop solution to augment other desktop electronic hardware, this is for you. If you need a larger case, EcoSkiff passes on the savings for more traditional size racks like 84HP and 104HP.

Save on money and space: get just as much HP as you need!

Available in the following sizes:
24HP
44HP
64HP
84HP
104HP

Features and specifications:

Over-current protection: shuts off each power rail automatically if modules use too much current on that rail
The skiff goes together with just a Phillips head screwdriver!
Comes with 3mm slide nuts
Max module depth: 44mm
Max module depth above power supply: 33mm

Specifications, 64HP-104HP:
Power output:
+12V @ 2A
-12V @750mA
5V@ 1.5A
Power connectors: 15
Daisy chains to another EcoSkiff, Skiff Power, Five Amp Power, or Schottkey DC

Requires a 12V 5A center positive power brick with a 5.5mm x 2.1mm tip.
Assembly required, but no soldering needed.

Notes: EcoSynth is a small, portable Eurorack modular case solution, designed for your desktop! It's a practical solution designed to save your hard-earned cash for modules. If you're looking for a small desktop solution to augment other desktop electronic hardware, this is for you. If you need a larger case, EcoSkiff passes on the savings for more traditional size racks like 84HP and 104HP.

Save on money and space: get just as much HP as you need!

Available in the following sizes:
24HP
44HP
64HP
84HP
104HP

Features and specifications:
Over-current protection: shuts off each power rail automatically if modules use too much current on that rail
The skiff goes together with just a Phillips head screwdriver!
Comes with 3mm slide nuts
Max module depth: 44mm
Max module depth above power supply: 33mm

Specifications, 24HP-44HP:
Power output:
+12V @ 1A
-12V @300mA
5V@ 150mA
Power connectors: 2 (plus optional flying bus cable)

Specifications, 64HP-104HP:
Power output:
+12V @ 2A
-12V @750mA
5V@ 1.5A
Power connectors: 15
Daisy chains to another EcoSkiff, Skiff Power, Five Amp Power, or Schottkey DC

Requires a 12V 5A center positive power brick with a 5.5mm x 2.1mm tip.
Assembly required, but no soldering needed.

Notes: The Black Box (AKA Ponyhof) is a 42HP skiff case designed as an enclosure for the Verbos Mini Horse module.

The enclosure is made of 1.5mm Powder Coated Steel. It includes an internal Verbos power supply and an external power supply.