安全购物

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

安全购物

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Synth module accessories

首页  Equipment  

Synth module accessories

Options
Items 1 to 50 of 98 on page 1 of 2
1  2  »
Subscribe to our weekly Studio Equipment emails
Cat: 598242 Rel: 08 Mar 16
 
Hand-stained all hardwood eurorack synth module enclosure with power - 360HP of space
Notes: ***POWER SET FOR EU AND AUSTRALIA 220-230V:
The Pittsburgh Modular Structure 208 and Structure 360 eurorack enclosures use a switching power supply that needs manually set to the correct AC input voltage. The internal switch has already be properly set for 220-230 VAC. This setting works for the EU and Australia or other countries that use 220-230 VAC power.
For use in countries that use 100-120 VAC power, such as North America and Japan, the switch inside the case on the AC/DC regulator needs to be switched to the left. The switch is marked with a Yellow sticker printed with "AC input voltage can be selected by switch. Check input voltage avoiding damage before power on." The switch is located on the side of the enclosure below the arrow.
Please contact Pittsburgh Modular with any questions. service@pittsburghmodular.com***

Structure EP-360 Eurorack Enclosure

Maximum Power for a New Generation -

Beautifully stained hardwood triple row, 360hp powered eurorack travel case with lid. A huge case to house a monster synth. Features include a professional, heavy duty, internal power supply designed to exceed the needs of the most demanding analog and digital eurorack systems.




Everything is New:
With years of research and two case lines under our belt, we decided to start over and produce a line of cases for the next generation of eurorack synthesizers. The eurorack modular ecosystem is expanding faster than ever and manufacturers are constantly pushing eurorack cases and power supplies to the limits. What started as a power supply designed to drive primarily analog synthesizers has transformed into a supply that needs to simultaneously meet the unique demands of sensitive analog circuitry, power hungry digital processors, and ground sensitive user interface modules.

We started with what matters most. Clean power. A lot of it. Up to 3x the amount of clean power available in cases from other brands. Next we turned our focus to the enclosure itself and there was only one goal. Make the case stronger. Our engineers tested countless combinations utilizing different types of wood, joints, adhesives, assembly techniques, and hardware to ensure that Structure cases are as durable as they are beautiful.

With a clean and gorgeous design that promotes creative exploration, the Structure enclosures are our most robust and refined case line yet. With massive amounts of both room and clean power, you can reach completely new heights in your creative performances.






Includes:
Structure EP-360

Power
:
6 Amps of Clean +12v Power

6 Amps of Clean -12v Power

5 Amps of Clean +5v Power

Custom Powered Bus Board with 15 Keyed Eurorack Power Headers Per Row, 45 Power Headers Total

External On-off Rocker Power Switch with LED

Universal IEC Power Connector Works Anywhere

Structure EP-360 Enclosure
:
Hardwood and Steel Construction (No cheap plastic here)

Triple 120hp Rows

Removable Lid

Lid Fits Over Fully Patched System (No need to remove patch cables)

Edge to Edge Rail Design Reduces Gaps Between Modules and the Side of the Case

24 Smooth Sliding Square Nuts Per Rail (Holds up to 72 modules)

Beautifully Hand-Stained Hardwood

Matching Black Steel Hardware Set




Structure EP-360 Dimensions
:
External Depth with lid:9 1/4"
External Depth without Lid: 5 1/2"
External Height: 17"
External Width: 25 1/2"
Internal Depth Above Power Supply: 2 3/4"
Internal Depth Above Bus Board: 3 3/4"
Internal Depth Above Nothing: 4 1/4"
Read more
MRP:$1,110.44 SAVE 27%
 1 in stock $809.56
Cat: 738778 Rel: 29 Jul 19
 
7U 104HP black Eurorack case with foldable steps
Notes: Supplied with an incorporated power supply fixed on the left side of the box.

Two foldable steps and 3 bus boards inside the case.

The sides are made of 5mm thick Plexiglas.

The frame is made of aluminium with a sanded black finish for less scratches.

Rails are black.

It has two rows 3U 104 HP and one row 1U 104 HP.

Intellijel format.

- 104HP
- Depth of the box: 6cm
- Depth of the box along the 5HP of the power supply: 4cm
- Power consumption: +12V : 1.5A ; -12V : 1A ; +5V : 0.5A
Read more
 1 in stock $412.68
Click for better price!
or call +44 20 7424 1960
quote 738778
Cat: 727747 Rel: 03 May 19
 
Compact & lightweight metal case with wooden side panels
Notes: Made of metal, and with a noble vintage look thanks to beautiful wooden side parts, this 6U case is flat and offers two rows of 84 HP for the installation of modules. The integrated 4 HP wide KAZU power solution with switching PSU and EVE1 busboard works extremely accurately and delivers very clean power. A total of up to 20 modules can be connected. The KAZU PSU solution is of high quality and delivers a constant current without getting hot.
Read more
 1 in stock $317.93
Notes: Your Palette case is the ideal solution for your space conscious and portable needs. At about the same size as a small laptop, your Palette fits comfortably on your desktop; in your backpack; at your favourite coffee shop; in your jam space; or pretty much anywhere else you might desire to play. Your imagination is the only limit. With 62hp of rack space, you can piece together powerful but focused mini systems and control surfaces. Intellijel's 1U row and built-in i/o ports add a ton of extra utility to bring the most out of your Eurorack modules. Truly a palette for the sonic artist.

Utilities panel:

- Dual 1:4 buffered multiple
- Two 1/4" balanced audio jacks that can be connected to the Stereo Line Out 1U, Pedal I/O 1U or Mixup
- 1/8" (6.35mm) MIDI Input that can be connected to uMIDI 1U
- USB port that connects to the uMIDI 1U and other future modules
- Rocker switch and barrel plug for power entry

Construction:

- Anodized aluminium
- Aluminium extruded rails with steel threaded inserts
- Rubber feet to protect your desktop
- Rear mounted power supply for maximum module depth

Includes:

- 40W Meanwell AC/DC adapter with right angled connector
- 3FT North American IEC power cable
- 1/8" (6.35mm) TRS to 5-Pin Din MIDI adapter
Read more
 3 in stock $293.72
Notes: Your Palette case is the ideal solution for your space conscious and portable needs. At about the same size as a small laptop, your Palette fits comfortably on your desktop; in your backpack; at your favourite coffee shop; in your jam space; or pretty much anywhere else you might desire to play. Your imagination is the only limit. With 62hp of rack space, you can piece together powerful but focused mini systems and control surfaces. Intellijel's 1U row and built-in i/o ports add a ton of extra utility to bring the most out of your Eurorack modules. Truly a palette for the sonic artist.

Utilities panel:

- Dual 1:4 buffered multiple
- Two 1/4" balanced audio jacks that can be connected to the Stereo Line Out 1U, Pedal I/O 1U or Mixup
- 1/8" (6.35mm) MIDI Input that can be connected to uMIDI 1U
- USB port that connects to the uMIDI 1U and other future modules
- Rocker switch and barrel plug for power entry

Construction:

- Anodized aluminium
- Aluminium extruded rails with steel threaded inserts
- Rubber feet to protect your desktop
- Rear mounted power supply for maximum module depth

Includes:

- 40W Meanwell AC/DC adapter with right angled connector
- 3FT North American IEC power cable
- 1/8" (6.35mm) TRS to 5-Pin Din MIDI adapter
Read more
 3 in stock $292.67
Cat: 777368 Rel: 30 Jun 20
 
powered desktop case
Notes: The Soundmachines 'FMJ3 XL' is a 3U 104 HP Powered Desktop Case introducing the brand new case line. The case features a sturdy steel housing to protect power supplies and modules as well as modular mounting options to build 6U and 9U expanded setups (to be announced). The FMJ3 XL case also employs 2x850mA power rails and VESA 100mm mounting holes to construct flying desktop systems.
Read more
MRP:$329.72 SAVE 16%
 1 in stock $276.86
Click for better price!
or call +44 20 7424 1960
quote 777368
FORTHCOMING
Behringer Eurorack Go Case
Cat: 772854
 
eurorack case
Notes: The EURORACK GO was engineered specifically to protect your favorite synthesizer modules and similar 3U electronics. With 2 rows of 140 HP useable mounting space (for a total of 280 HP), the rugged aluminum chassis features 96 sliding nuts for ultra-easy positioning of your precious gear. In the studio or on the road, the EURORACK GO is the ideal way to protect your rig - wherever the gig takes you.

One of the features that separates EURORACK GO from competing products is the massive, ultra-low noise power supply. The auto-ranging universal switch-mode supply works anywhere in the world and uses 32 keyed power connectors to protect your valuable modules from accidental reverse power hookup.

Designed for rugged reliability, the all-aluminum chassis houses an adjustable support plus oversized rubber feet to provide 0-50- setup capability and ensures rock-solid stability for use on a wide range of surfaces.

Read more
coming soon $267.39
Cat: 777365 Rel: 30 Jun 20
 
synth module case
Notes: The first product of the new case line from Soundmachines.

Sturdy steel to house and protect your modules.

2x850mA power rails.

VESA mount to construct your flying desktop systems.

The Soundmachines 'FMJ3' is a 3U 84 HP Powered Desktop Case introducing the brand new case line. The case features a sturdy steel housing to protect power supplies and modules as well as modular mounting options to build 6U and 9U expanded setups (to be announced). The FMJ3 case also employs 2x850mA power rails and VESA 100mm mounting holes to construct flying desktop systems!

Read more
MRP:$264.03 SAVE 16%
 1 in stock $221.06
Click for better price!
or call +44 20 7424 1960
quote 777365
Cat: 769789 Rel: 20 Mar 20
 
Eurorack enclosure case
Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod64X is 64HP with 2.16" (55mm) of available module depth. The built-in power supply has four power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.

Pods require a power brick, or a barrel cable to daisy-chain to a Pod or Row Power that's already powered.

Pods are a perfect way to get started in Eurorack, or add a couple more modules to your monster system!

Made from 100% anodized aluminum, Pods are light, tough and perfect for on-the-go set ups. The power supply can handle up to 1.4A of +12V, which is plenty of juice for even the most modern digital modules. (Or if you prefer to DIY your power supply, Pods are also available unpowered)

Each Pod64X typically will house up to six modules, but more can be accommodated using a multi-power cable accessory.

Mix and match your Pods with desktop synths, effect pedals, drum machines or any musical gear for a flexible modular system. Pods can even daisy- chain with the 4ms Row Power system making them a convenient outboard mini-skiff. Need to add another module? Just add a Pod! Need to pack light for a live set? Just grab the Pods you need and go!

Basic Features:

64 HP of Eurorack modular space
Extra room for deep modules
Standard M3 threaded holes
100% lightweight anodized aluminum
Built-in Power supply
Red, White, and Blue LED power indicators

Includes:

64HP Pod, black anodized aluminum
Built-in power supply with six Eurorack power headers
Extra deep (2.16"/55mm) fits virtually every Eurorack module
M3 x 8mm pan-head screws, stainless steel (20)
Adhesive rubber feet (4)
Does not include barrel cable or power brick
Power Supply:

Four 16-pin Eurorack power shrouded headers
+12V max 1.4A
-12V max 0.67A
+5V max 1.0A
Power input: Two barrel jacks for daisy-chaining
15V-20VDC, 2.1mm positive tip
Exterior dimensions:
Width: 329.7mm (12.98")
Height: 159.5mm (6.28")
Depth: 57mm (2.24")
Interior dimensions:
Max module depth: 55mm (2.16")
Module width: 64HP
Weight:
0.5 kg = 17 oz
Read more
MRP:$224.87 SAVE 12%
 2 in stock $196.86
Click for better price!
or call +44 20 7424 1960
quote 769789
Cat: 614713 Rel: 20 Jun 16
 
Eurorack synth module case, with built-in power supply - 104HP wide
Notes: Desktop Eurorack moduile case 3U - 104HP with power supply on the left side.

Plexiglas side panels 5mm thick.

Aluminium chassis.

6cm deep, but only 4cm deep all along the 5HP of the power supply. Check your modules before!

Tech specs:
- Width : 104HP
- Depth : 6cm
- Depth all along the 5HP of the power supply : 4cm
- Current Consumption : +12V : 2.4A ; -12V : 1.2A ; +5V : 0.5A
Read more
 3 in stock $185.29
Cat: 760204 Rel: 17 Jan 20
 
skiff case for Verbos Mini Horse module
Notes: The Black Box (AKA Ponyhof) is a 42HP skiff case designed as an enclosure for the Verbos Mini Horse module.

The enclosure is made of 1.5mm Powder Coated Steel. It includes an internal Verbos power supply and an external power supply.
Read more
MRP:$204.65 SAVE 14%
 1 in stock $176.86
Click for better price!
or call +44 20 7424 1960
quote 760204
Cat: 760078 Rel: 17 Dec 19
 
High-quality low-cost Doepfer Eurorack case with power
Notes: This is the 3U version of the low cost cases A-100LC6/LC9. The A-100LC3 is very similar to the A-100LC6 but offers only one row with 84 HP for installation of modules. A-100LC3 is equipped with one power supply (1200mA) and one bus board. Because of the limited space the power supply of the DIY-Kit #1 with an external transformer is used (same as for the DIY-Kit #1: 15V AC/2500mA). At the left side of the case the connector for the external transformer is located. The external transformer is not shown in the pictures. A suitable transformer for the US market is manufactured by Triad Magnetics and has the product name WAU16-2400 (16V AC / 2.4A). It is available from several electronic shops like Mouser, Digikey, Newark, Farnell and others.

The case is made of raw wood without laquering. The case can be varnished by the customer in any desired colour e.g. by means of a spray can.
Read more
MRP:$224.87 SAVE 23%
 2 in stock $173.69
Cat: 614712 Rel: 20 Jun 16
 
Eurorack synth module case, with built-in power supply - 84HP wide
Notes: Desktop Eurorack moduile case 3U - 84HP with power supply on the left side.

Plexiglas side panels 5mm thick.

Aluminium chassis.

6cm deep, but only 4cm deep all along the 5HP of the power supply. Check your modules before!

Tech specs:
- Width : 84HP
- Depth : 6cm
- Depth all along the 5HP of the power supply : 4cm
- Current Consumption : +12V : 2.4A ; -12V : 1.2A ; +5V : 0.5A
Read more
 2 in stock $167.39
Cat: 711005 Rel: 12 Dec 18
 
60HP metal enclosure for Eurorack modules with built-in power supply
Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod60 is 60HP with 1.34" (34mm) of available module depth. The built-in power supply has four power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.

Pods require a power brick. If you already have a powered Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain powered Pods.

The Pod60 includes twenty (20) M3x8mm stainless steel screws and is compatible with M3 Knurlies.
Read more
MRP:$202.13 SAVE 19%
 2 in stock $164.22
Click for better price!
or call +44 20 7424 1960
quote 711005
Cat: 725517 Rel: 12 Apr 19
 
Portable, compact enclosure that turns Eurorack modules into table-top instruments
Notes: The Pod48X is 48HP with 2.00" (51mm) of available module depth. The built-in power supply has four power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.

Pods require a power brick. If you already have a powered Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain powered Pods.

The Pod48X includes ten (10) M3x8mm stainless steel screws and is compatible with M3 Knurlies.
Read more
MRP:$179.39 SAVE 15%
! low stock $151.60
Click for better price!
or call +44 20 7424 1960
quote 725517
Cat: 725502 Rel: 12 Apr 19
 
Portable, compact enclosure that turns Eurorack modules into table-top instruments
Notes: The Pod40X is 40HP with 2.00" (51mm) of available module depth. The built-in power supply has four power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.

Pods require a power brick. If you already have a powered Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain powered Pods.

The Pod40 includes ten (10) M3x8mm stainless steel screws and is compatible with M3 Knurlies.
Read more
MRP:$168.02 SAVE 16%
 2 in stock $141.07
Click for better price!
or call +44 20 7424 1960
quote 725502
Cat: 769782 Rel: 20 Mar 20
 
eurorack enclosure case
Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod34X is 34HP wide and has extra room to fit even the deepest modules (2.16" / 55mm of available module depth). The built-in power supply has four power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.

This Pod requires a power brick (not included).

Or, if you already have a Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain power supplies.

Pods are a perfect way to get started in Eurorack, or add a couple more modules to your monster system!

Made from 100% anodized aluminum, Pods are light, tough and perfect for on-the-go set ups. The power supply can handle up to 1.4A of +12V, which is plenty of juice for even the most modern digital modules. (Or if you prefer to DIY your power supply, Pods are also available unpowered)

Each Pod typically will house one or two modules, but three or more can be accommodated using a multi-power cable accessory.

Mix and match your Pods with desktop synths, effect pedals, drum machines or any musical gear for a flexible modular system. Pods can even daisy- chain with the 4ms Row Power system making them a convenient outboard mini-skiff. Need to add another module? Just add a Pod! Need to pack light for a live set? Just grab the Pods you need and go!

Basic Features:

34 HP Eurorack modular space
Standard M3 threaded holes
100% lightweight anodized aluminum
Built-in Power supply
Red, White, and Blue LED power indicators

Includes:
34HP Pod, black anodized aluminum
Extra deep (2.16"/55mm) fits virtually every Eurorack module
Built-in power supply with four Eurorack power headers
M3 x 8mm pan-head screws, stainless steel (10)
Adhesive rubber feet (4)
Does not include barrel cable or power brick
Power Supply:
Four 16-pin Eurorack power shrouded headers
+12V max 1.4A
-12V max 0.65A
+5V max 1.0A
Power input: Two barrel jacks for daisy-chaining
15V-20VDC, 2.1mm positive tip
Exterior dimensions:
Width: 177.3mm (6.98")
Height: 159.5mm (6.28")
Depth: 57mm (2.24")
Interior dimensions:
Max module depth: 55mm (2.16")
Module width: 34HP
Weight:
0.3 kg = 10 oz
Read more
MRP:$155.39 SAVE 13%
 3 in stock $134.76
Click for better price!
or call +44 20 7424 1960
quote 769782
Cat: 706840 Rel: 12 Dec 18
 
32HP metal enclosure for Eurorack modules with built-in power supply
Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod32 is 32HP with 1.34" (34mm) of available module depth. The built-in power supply has two power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.

Pods require a power brick. If you already have a powered Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain powered Pods.

The Pod32 includes ten (10) M3x8mm stainless steel screws and is compatible with M3 Knurlies.
Read more
MRP:$137.70 SAVE 17%
 1 in stock $113.70
Click for better price!
or call +44 20 7424 1960
quote 706840
Cat: 755443 Rel: 13 Nov 19
 
48HP low cost frame with power supply
Notes: The A-100LC1 is very similar to the A-100LC3 but offers only 48 HP for installation of modules. A-100LC3 is equipped with the power supply A-100SSB.

The case is made of raw wood without lacquering. The case can be varnished by the customer in any desired colour e.g. by means of a spray can.

Quantity of bus boards: 1 (short version with 8 module connectors)
Read more
 2 in stock $112.64
Click for better price!
or call +44 20 7424 1960
quote 755443
Cat: 706837 Rel: 12 Dec 18
 
26HP metal enclosure for Eurorack modules with built-in power supply
Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod26 is 26HP with 1.34" (34mm) of available module depth. The built-in power supply has two power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.

Pods require a power brick. If you already have a powered Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain powered Pods.

The Pod26 includes ten (10) M3x8mm stainless steel screws and is compatible with M3 Knurlies.
Read more
MRP:$125.07 SAVE 21%
 1 in stock $98.95
Click for better price!
or call +44 20 7424 1960
quote 706837
Cat: 769793 Rel: 20 Mar 20
 
eurorack enclosure case
Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod64X Unpowered is 64HP with 2.16" (55mm) of available module depth. No power supply is included, you must supply your means of powering modules with a DIY power supply or a front-facing module such as the Row Power. Two holes on the rear face are plugged with removable plastic plugs, and can be used for DIY applications.

Pods are a perfect way to get started in Eurorack, or add a couple more modules to your monster system!

Made from 100% anodized aluminum, Pods are light, tough and perfect for on-the-go set ups. Mix and match your Pods with desktop synths, effect pedals, drum machines or any musical gear for a flexible modular system. Need to add another module? Just add a Pod! Need to pack light for a live set? Just grab the Pods you need and go!

Basic Features:

64 HP Eurorack modular space
Standard M3 threaded holes
100% lightweight anodized aluminum

Includes:

64HP Pod, black anodized aluminum
M3 x 8mm pan-head screws, stainless steel (20)
Adhesive rubber feet (4)
Unpowered: requires you to provide your own Eurorack power system
Exterior dimensions:
Width: 329.7mm (12.98")
Height: 159.5mm (6.28")
Depth: 57mm (2.24")
Interior dimensions:
Max module depth: 55mm (2.16")
Module width: 64HP
Weight:
0.42 kg = 14.9 oz
Read more
MRP:$103.59 SAVE 17%
 3 in stock $86.32
Click for better price!
or call +44 20 7424 1960
quote 769793
Cat: 711004 Rel: 12 Dec 18
 
60HP metal enclosure for Eurorack modules
Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod60 Unpowered is 60HP with 1.34" (34mm) of available module depth. No power supply is included, you must supply your means of powering modules with a DIY power supply or a front-facing module such as the Row Power. Two holes on the rear face are plugged with removable plastic plugs, and can be used for DIY applications.
Read more
MRP:$98.54 SAVE 18%
 2 in stock $81.07
Click for better price!
or call +44 20 7424 1960
quote 711004
Cat: 725518 Rel: 12 Apr 19
 
Portable, compact enclosure that turns Eurorack modules into table-top instruments
Notes: The Pod40X Unpowered is 48HP with 2" (51mm) of available module depth. No power supply is included, you must supply your means of powering modules with a DIY power supply or a front-facing module such as the Row Power. Two holes on the rear face are plugged with removable plastic plugs, and can be used for DIY applications.
Read more
MRP:$92.22 SAVE 18%
 2 in stock $75.80
Click for better price!
or call +44 20 7424 1960
quote 725518
Cat: 733659 Rel: 21 Oct 19
 
Z-DSP tape echo effects card
Notes: TAPE ECHO by Tiptop Audio brings classic tape-based delays to the Z-DSP effects library. Eight expressive algorithms which emulate analogue tape machines and the producers that inspire Tiptop Audio.

With Tape Echo you can do it all - recreate space echo dub sound of Lee "Scratch" Perry and King Tubby or dig deep into the gritty and endless saturated repeats favoured by dub experimenters like Basic Channel and Boards of Canada.

So wide in its functionality, playability and natural in its sound, Tape Echo sits comfortably amongst the greats of the Roland RE-201 Space Echo, Copycat and Maestro Echoplex all while having a unique character of its own.

From wobbly tape to stereo pong, Tape Echo comes with a multitude of expressive settings and presets that allow you to recreate virtually any style of analogue echo or magnetic tape delay or invent your own sound when you adjust the fidelity of the Z-DSP clock!

Tape Echo for the Tiptop Audio Z-DSP is a joy to use. Precision control of the Frequency, Filter and Feedback are clear to read with the Z-DSP display, plus corresponding controls make setting delay times by ear easy and fun to do like its predecessors.
Read more
 1 in stock $72.63
Cat: 617808 Rel: 30 Jun 16
 
Replacement 16-pin VCO core chip for Furthrrrr Generator
Notes: - 16-pin DIP IC chip-VCO core replacement that works with any Furthrrrr Generator

- Expands the Furthrrrr Generator with linear trhu-zero FM for obtaining new timbres - deeper, metallic timbres, entirely new sphere of sounds from light whistles to weird noises
Read more
 1 in stock $71.58
Click for better price!
or call +44 20 7424 1960
quote 617808
FORTHCOMING
Behringer 3 Tier Eurorack Module Stand Case
Cat: 780468 Rel: 27 Jul 20
 
module stand case
Notes: Behringer Eurorack Stand 3-Tier; desktop stand for mounting up to 3 Eurorack 104 cases (item 463669), or 3 Behringer synthesizers (e.g. Pro-1, Wasp Deluxe, K-2, Neutron, Model D, Cat).

Variable width (70 HP, 80 HHP or 104 HP); rugged aluminum/steel construction.
Read more
coming soon $66.31
Cat: 752442 Rel: 25 Oct 19
 
32HP metal enclosure for Eurorack modules with built-in power supply - Beta version
Notes: Limited Beta version of the popular Pod32. These are new, fully tested and functional units. The only difference between the Pod32 Beta and the regular Pod32 is that the Beta version has fewer holes to screw in modules. Most common Eurorack sizes will fit from 4HP to 32HP, but some odd sizes and combinations won't fit. Please refer to the product image, or visit the 4ms website for possible module combinations.

This Pod requires a power brick (not included). Or, if you already have a Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain power supplies.

Pods are a perfect way to get started in Eurorack module, or add a couple more modules to your monster system!

Made from 100% anodized aluminium, Pods are light, tough and perfect for on-the-go set ups. Mix and match your Pods with desktop synths, effect pedals, drum machines or any musical gear for a flexible modular system. Need to add another module? Just add a Pod! Need to pack light for a live set? Just grab the Pods you need and go!
Read more
MRP:$79.59 SAVE 18%
 3 in stock $65.27
Click for better price!
or call +44 20 7424 1960
quote 752442
Cat: 706836 Rel: 12 Dec 18
 
26HP metal enclosure for Eurorack modules
Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod26 Unpowered is 26HP with 1.34" (34mm) of available module depth. No power supply is included, you must supply your means of powering modules with a DIY power supply or a front-facing module such as the Row Power. Two holes on the rear face are plugged with removable plastic plugs, and can be used for DIY applications.
Read more
MRP:$69.48 SAVE 26%
 2 in stock $51.58
Cat: 706839 Rel: 12 Dec 18
 
32HP metal enclosure for Eurorack modules
Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod32 Unpowered is 32HP with 1.34" (34mm) of available module depth. No power supply is included, you must supply your means of powering modules with a DIY power supply or a front-facing module such as the Row Power. Two holes on the rear face are plugged with removable plastic plugs, and can be used for DIY applications.
Read more
MRP:$74.53 SAVE 31%
 1 in stock $51.58
Cat: 719709 Rel: 02 Sep 19
 
Empty rack for AE modular, 2 x 16U
Notes: The 2-row rack for AE modular is 16 units wide with 2 rows; the MASTER module consumes 2 units so you have 30U remaining for other modules.

Via a joint kit (not included) another case of this width (either one-row or two-row) can be attached at a free angle; the bus is connected via a short connector cable between both cases.

The sides are made of red acrylic, all other parts are of wood fibre board (MDF), black painted.

Dimensions: 41.3 x 21.7 x 4.5 cm (width x depth x height)
Read more
 3 in stock $40.01
Click for better price!
or call +44 20 7424 1960
quote 719709
Cat: 720435 Rel: 11 Feb 19
 
Bus stick, shrouded
Notes: Bus Sticks are low-profile, small footprint power distribution boards for powering up to 13 modules using shrouded (keyed) headers. Simply connect to a Row Power module using the included cable. Attaches to your case using adhesive pads (included) or by drilling and screwing.
Read more
MRP:$46.74 SAVE 17%
 3 in stock $38.95
Notes: Bus board to connect 14 modules

An assembled and tested bus board, 22 sockets, e.g. for customers who want to built their own case and need a bus board for A-100 modules, includes cables for connection to +/-12V power supply (4 wires with flat connectors on both ends, length about 30cm), but no mechanical parts (e.g. screws, spacers, nuts, washers).

In the new version of the A-100 bus board (labeled Version 6 / 2019) boxed pin headers are used which are equipped with a reverse protection (gap for the "nose" of the socket of the bus cable). When the bus cable coming from the module is connected to the boxed header in question the "nose" has to point to the right. The polarity of the cable is correct if the red wire of the bus cable then points to the bottom (to the continuous line labeled"RED WIRE" on the pc board). If this is not the case please do not connect the module to the bus board ! Otherwise both the module and the power supply (A-100PSU3) may be damaged ! In that case please contact the manufacturer of the module and ask for a suitable bus cable with the correct polarity of the connector.

The bus cables of original A-100 modules manufactured by Doepfer are equipped with suitable bus cables since 2012. Only for older A-100 modules manufactured before 2012 it may happen that the polarity of the 16 pin female connector of the bus cable is wrong (nose points to the left when red wire points to the bottom). This is because in the past unboxed pin headers were used and the position of the "nose" did not matter. In such a case please contact Doepfer or one of their dealers and order a suitable bus cable.
Read more
 1 in stock $38.43
Cat: 755436 Rel: 12 Nov 19
 
Passive Eurorack bus board
Notes: The A-100BUS from Doepfer is a simple passive busboard for use with Eurorack modules. It features 14 power headers along with three sets of spade terminals for connection to power supplies such as the Doepfer PSU3 and daisy-chaining with other A-100 bus boards.
Read more
 1 in stock $37.89
Xaoc Devices Zadar Black Faceplate (synth module faceplate)
Cat: 718928 Rel: 05 Feb 19
 
High quality, black anodized & screenprinted panel
Notes: Replacement black panel for XAOC Devices Zadar 1973 quadruple envelope generator module.

No soldering required.

Width: 10HP
Read more
 1 in stock $34.48
Cat: 719731 Rel: 12 Sep 19
 
AE modular Eurorack adapter frame
Notes: The AE modular Eurorack adapter frame allows to integrate AE modular modules into Eurorack systems. It is basically an empty Eurorack-sized frame that can take up to 16 units of AE modules where two units are occupied by the mandatory MASTER module. Via the MASTER module the frame is powered from the Eurorack bus.

The product includes:

- The mounting frame with screws for mounting the AE modules
- The ribbon cable for Eurorack bus connection
- The bus cable
Read more
 1 in stock $34.48
Xaoc Devices Batumi Black Faceplate (synth module faceplate)
Cat: 718925 Rel: 05 Feb 19
 
High quality, black anodized & screenprinted panel
Notes: Replacement black panel for XAOC Devices Batumi, quadruple digital LFO module.

No soldering required.

Width: 10HP
Read more
 1 in stock $33.43
Cat: 755444 Rel: 05 Nov 19
 
Eurorack cable holder
Notes: We wanted to organize patch cables that were hanging on all possible objects in our Lab, therefore we decided to make patch cable holders.

Rigid, 2mm aluminium powder coated cable holders can host over 100 patch cables in perfect order! Two screws for fixing the cable holder are included.
Read more
 More than 10 in stock $29.73
Cat: 719730 Rel: 03 Sep 19
 
AE modular Eurorack adapter frame
Notes: The AE modular Eurorack adapter frame allows to integrate AE modular modules into Eurorack systems. It is basically an empty Eurorack-sized frame that can take up to 12 units of AE modules where two units are occupied by the mandatory MASTER module. Via the MASTER module the frame is powered from the Eurorack bus.

The product includes:

- The mounting frame with screws for mounting the AE modules
- The ribbon cable for Eurorack bus connection
- The bus cable
Read more
 2 in stock $29.47
Cat: 758855 Rel: 05 Dec 19
 
Eurorack cable holder
Notes: We wanted to organize patch cables that were hanging on all possible objects in our Lab, therefore we decided to make patch cable holders.

Rigid, 2mm aluminium powder coated cable holders can host over 100 patch cables in perfect order! Two screws for fixing the cable holder are included.
Read more
 2 in stock $29.22
Cat: 729650 Rel: 09 May 19
 
SD card for ONE Sample Player
Notes: STRIKE: Acoustic Percussion Elements
Format: SD Sample card for ONE Sample Player
Recorded and edited by: Kabuki
Type: One Shot
Character: Percussive, Acoustic

256 acoustic drum and percussion sounds compiled for the STRIKE micro SD card for ONE Sample Player by Tiptop Audio. STRIKE is the ideal sonic companion for analogue oscillators and the sounds found in Eurorack.

All sounds were painstakingly recorded using an assortment of vintage microphones, tracked through an SSL 4000 G series mixing desk then printed to 1/4" analogue tape on a well-serviced Studer A80 machine.

Thanks to this detailed process, the delicate texture of each of the sounds has been retained, inviting straight-forward use or experimentations within the Modular realm.
Read more
 1 in stock $27.89
Xaoc Devices Poti Black Faceplate (synth module faceplate)
Cat: 718926 Rel: 05 Feb 19
 
High quality, black anodized & screenprinted panel
Notes: Replacement black panel for XAOC Devices Poti, expander module for the Batumi quadruple digital LFO.

No soldering required.

Width: 3HP
Read more
 2 in stock $25.27
Cat: 719727 Rel: 03 Sep 19
 
AE modular Eurorack adapter frame
Notes: The AE modular Eurorack adapter frame allows to integrate AE modular modules into Eurorack systems. It is basically an empty Eurorack-sized frame that can take up to 8 units of AE modules where two units are occupied by the mandatory MASTER module. Via the MASTER module the frame is powered from the Eurorack bus.

The product includes:

- The mounting frame with screws for mounting the AE modules
- The ribbon cable for Eurorack bus connection
- The bus cable
Read more
 2 in stock $24.22
Cat: 760209 Rel: 15 Jan 20
 
blank panel set comprising of 4 panels
Notes: A set of blank panels to be used in dedicated Verbos systems. Packaged only as a full set.

The set comprises 1HP, 2HP, 2HP with Logo, 4HP.
Read more
 1 in stock $20.79
Cat: 760082 Rel: 17 Dec 19
 
5 x Erica Synths voice cards
Notes: 5 DIY voice-cards that are empty, allowing users to develop their own patches.

Voice-cards with preset patches set it apart from other Eurorack systems - they allow the user to change patches instantly and radically, which makes the system well suited for experimental live performances.
Read more
 2 in stock $18.08
Cat: 725964 Rel: 15 Jul 19
 
Passive 1 to 2 splitter or 2 to 1 mixer
Notes: Whether you are mixing control voltage signals for more interesting modulations or just copying an audio signal for parallel processing, SPLIX is a handy addition to your arsenal of Eurorack tools.

Functioning as either a mixer or splitter, its small lightweight form-factor means it can fit nearly anywhere without weighing down your patch. The thumb-wheel controls the crossfader balance of two inputs, or the level ratio between two outputs. SPLIX also functions as a passive inline attenuator when using only one input and one output.
Read more
 2 in stock $14.48
Cat: 725967 Rel: 15 Jul 19
 
Passive 1 to 2 splitter or 2 to 1 mixer
Notes: Whether you are mixing control voltage signals for more interesting modulations or just copying an audio signal for parallel processing, SPLIX is a handy addition to your arsenal of Eurorack tools.

Functioning as either a mixer or splitter, its small lightweight form-factor means it can fit nearly anywhere without weighing down your patch. The thumb-wheel controls the crossfader balance of two inputs, or the level ratio between two outputs. SPLIX also functions as a passive inline attenuator when using only one input and one output.
Read more
 1 in stock $14.48
Cat: 725969 Rel: 15 Jul 19
 
Passive 1 to 2 splitter or 2 to 1 mixer
Notes: Whether you are mixing control voltage signals for more interesting modulations or just copying an audio signal for parallel processing, SPLIX is a handy addition to your arsenal of Eurorack tools.

Functioning as either a mixer or splitter, its small lightweight form-factor means it can fit nearly anywhere without weighing down your patch. The thumb-wheel controls the crossfader balance of two inputs, or the level ratio between two outputs. SPLIX also functions as a passive inline attenuator when using only one input and one output.
Read more
 2 in stock $14.48
Cat: 752440 Rel: 28 Oct 19
 
Flying bus cable - male pins
Notes: Flying Bus (male pin) are passive power distribution cables that work with the Row Power to distribute power to your modules.

Can be daisy-chained if extra headers are needed. One 14" flying bus cables with 7 male header pins.
Read more
MRP:$16.42 SAVE 18%
 9 in stock $13.43
Cat: 726849 Rel: 04 Apr 19
 
5 x Make Noise style rogan knobs, large
Notes: Make Noise knobs.
Read more
 1 in stock $11.85
FORTHCOMING
Befaco Male DIN5 To TRS Minijack Cable (1.5m, pack of 3)
Cat: 784170 Rel: 08 Oct 20
 
DIN5 to TRS cable
MRP:$13.90 SAVE 24%
coming soon $10.52
Items 1 to 50 of 98 on page 1 of 2
1  2  »

Filter

Synth module accessories
商品
Release Date
Featured
Close