Recording Studio Accessories

Notes: Wooden side cheeks for The Vermona DRM1 (any mark).

If you would like to use those instruments as desktop unit you do cover the rack mount wholes with these nice wood sides, the unit feels much more handable and robust while packaging and using it in your live set.

Notes: A Digital DJ looking for a professional, durable case solution for your Korg Volca series? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Korg Volca series, these cases are perfect for the travelling DJ that needs to protect their equipment.

Specifications

Colour: Black
Weight 0,39 kg / 0.858 lbs
Outer Dimensions (W x H x D): 23.3 x 15.5 x 5.6 cm | 9.2 x 6.1 x 2.2 inch
Inner Dimensions (W x H x D): Not Applicable
Material: Durashock molded EVA foam
Protection: Soft fleece interior

Extras

Easy grip zipper puller
Convenient carry handle

Fits:

Korg Volca Series:
Volca Beats
Volca Keys
Volca Bass
Volca Sample
Volca FM
Volca Kick
Volca Modular
Volca Drum
Volca Mix

Notes: Type 1 - Blue Reverb

Features:
Compact and low cost type
2 natural coil spring type
Input impedance are changeable
Length of connect wire are changeable by optional

Application:
Specially suited for small wattage amplifier
For electric organs, guitar amplifier
Ideally suited for practice amps
2 Springs Type

Notes: "It f*cks with the fabric of time" Tony Visconti describing Pitch Shifting to Brian Eno and David Bowie in 1976. That not so subtle description does quite neatly sum up what the Pitch Shift programs on the 'Time Fabric' card do!

Pitch shifting in the Z-DSP uses a technique called 'rotating tape head' delay lines named after pioneering tape based experiments in Germany in the 1960s. The tape heads move at speeds independent of the tape playback path and two heads are crossfaded to make a continuous output capable of beautiful pitched delay effects, harmonization and smooth reverbs.

These pitch shifting algorithms are much like the earliest digital pitch shifters released. Sounds similar to the Eventide H910, AMS 15-80 (with Pitch board) and Publison DHM 89 can be achieved. These programs are intended more for pure effects rather than the complex multiple harmony lines later devices and plugins became known for producing. Chords from single VCOs can easily be made using the 'Interval' programs on the card though.

Using a Z3000 to clock the Z-DSP, complete chaos from the delay lines and pitch shifting emerges, creating great and unexpected new sounds. Modulating the stereo pair of analog VC-Feedbacks animates the time and distance of the pitch shift opening up these algorithms for additional control from CV and audio signal alike.

Notes: A Digital DJ looking for a professional, durable case solution for your Ableton Push controllers? Then look no further, UDG have developed a super light EVA hard case designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Ableton Push controllers, these cases are perfect for the travelling DJ that needs to protect their equipment.

Notes: A producer/ musician looking for a professional, durable case solution for your Universal Audio Apollo Twin MKII/ X? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skillfully designed & moulded to fit the Universal Audio Apollo Twin MKII/ X, these cases are perfect for the travelling producer/ musician that needs to protect their equipment.

Specifications:

Weight: 0,47 kg / 1.034 lbs
Colour: Black
Outer Dimensions (W x H x D) cm: 16 x 15.8 x 6.8 | inch: 6.29 x 6.22 x 2.6
Inner Dimensions (W x H x D): Not Applicable
Material: Durashock molded EVA foam
Protection: Soft fleece interior

Extras:

Heavy-duty handle
Convenient carry handle
Easy grip zipper puller

Fits:

Universal Audio Apollo Twin
Universal Audio Apollo Twin MKII
Universal Audio Apollo Twin X

Notes: Perfourmer Rack Ears from Vermona are designed to mount the famed German manufacturer's analog four-voice synthesizer into a 19" rack. For sturdy, reliable performance, these heavy-duty black ears are the way to go.

Black metal rack ears- set of two ears

Notes: The CTRL MPC LIVE II is custom designed to a hold the Akai MPC LIVE II and is a very lightweight and convenient solution to carry your MPC well protected to your next studio or live session. Crafted from rigid Durashock molded EVA shell and a high-density foam interior it is furthermore equipped with an accessory panel to organize audio cables and accessories.

FITS:
Akai MPC LIVE II
MPC Live
Akai MPC Touch

BASICS:
Crafted from 6 mm thick and rigid Durashock molded EVA foam and water rejecting polyester exterior shell
Sturdy zipper
Including practical cable organizer panel
Incl. removable egg-foam padding to protect knobs, faders and pads
Comfortable carrying handles and shoulder strap
Compatible with Decksaverr cover

SPECS:
Outer measures: 44 x 29 x 13 cm
Inner measures: 42 x 27 x 11 cm
Weight: 1,26 kg

Notes: Dave Smith Instruments Tempest Replacement Oak End Cheeks

These solid oak replacement end cheeks have been precision machined and hand finished from FSC Certified oak.

They are sent as a pair and will be oiled to bring out the grain, they can still be stained any colour if you prefer them darker or more like the original etc.

These are a great addition to the Tempest, and add a nice look as well as been hard wearing.

Notes: The tools we use to compose and produce music are dear to our hearts. Dust, liquid and accidental impact have taken many a good unit down over the years - this is where Decksaver steps in. Precision trimmed for perfect fit, the Solid State Logic UC1 can sit ready for operation. This case slides straight into a flight or soft case for maximum protection during transportation, and it also shields delicate controls and internal components from damage at home, on the road and onstage.

Notes: The tools we use to compose and produce music are dear to our hearts. Dust, liquid and accidental impact have taken many a good unit down over the years - this is where Decksaver steps in. Precision trimmed for perfect fit, the Moog Subsequent 37 Cover can sit ready for operation. This case slides straight into a flight or soft case for maximum protection during transportation, and it also shields delicate controls and internal components from damage at home, on the road and onstage.

Notes: The perfect case for your Make Noise 0-Coast, 0-CTRL, Strega or Moog Werkstatt-01 with CV expander! Just zip it up and go make music anywhere. These lightweight and durable PULSE cases are designed for mobile electronic musicians.

Description:

PULSE cases are made from molded EVA that holds its shape and provides excellent protection. This case is designed to hold the 0-Coast along with its power supply, and it also includes a nylon mesh compartment for holding your cables.

Specifications:

Perfect fit for your 0-Coast, 0-CTRL, or Werkstatt + cables

Versatile and lightweight

Spacious and comfortable handle

High quality Analog Cases logo zipper puller

Interior dimensions: 11 x 6.5 x 1.5 inches

Notes: A Digital DJ looking for a professional, durable case solution for your Novation Circuit Tracks/ Rhythm? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skillfully designed & moulded to fit the Novation Circuit Tracks/ Rhythm, these cases are perfect for the travelling DJ that needs to protect their equipment.

Weight: 0.99 kg / 2.178 lbs
Colour: Black
Outer Dimensions (W x H x D): 29.5 x 25.0 x 7.0 cm | 11.6 x 9.8 x 2.7 inch
Inner Dimensions: (W x H x D) N/A
Material: Durashock molded EVA foam
Protection: Water repellent laminated nylon exterior
Black soft fleece interior

Extras:
Heavy duty handle
Easy grip zipper puller
Fits: Novation Circuit Tracks/ Rhythm

Notes: Oak Veneered Roland Boutique Custom Made Stand / End Cheeks for the JX03, JP08, JU06, SE02, TR09, TB03, TR08 etc.

This new Oak Veneered version of the stand holds 3 Roland Boutique synths. This will also fit the the tr09, tr08, se02. sh01a and tb03 etc. However, you will need to remove them from the additional case that they come with.

This stand has been made from Oak Veneered MDF wood, and is connected via 12x allen head Confirmat Screws (Allen Key & Screws Provided) into an mdf wooden bar.

These are a great addition to the Boutique synths, and give a much nicer look and better working angle.The Boutique Synths are gripped in place by the sides of the stand, so do not fully tighten screws until the units are placed inside- then tighten screws to hold firmly in place.

Make sure you do this on a flat surface to ensure the feet are correctly aligned.

The item will need assembly as it will be sent flat packed. All screws, tools and rubber feet are provided, however you must buy your own Roland Boutique Synth.

Notes: Oak Veneered Roland Boutique Custom Made Recessed Stand / End Cheeks for the JX03, JP08, JU06, SE02, TR09, TB03, TR08 etc.

This new version of the stand holds 3 Roland Boutique synths, This has been precision machined with a CNC Router so the boutiques lock firmly in place and cannot fall out.

This will fit all the Roland Boutiques, however you will need to remove them from the additional case DK01 that they come with.

This stand has been made from Oak Veneered MDF wood and is connected via 8x allen head Confirmat Screws (Allen Key & Screws Provided) into an mdf wooden bar.

These are a great addition to the Boutique synths and give a much nicer look and better working angle.

The Boutique Synths are gripped in place by the sides of the stand so do not fully tighten screws until the units are placed inside then tighten screws to hold firmly in place. Make sure you do this on a flat surface to ensure the feet are correctly aligned.

This item will need assembly as it will be sent flat packed. All screws, tools and rubber feet are provided however you must buy your own Roland Boutique Synth.

Notes: Roland TR8S Drum Machine/Sampler Oak Stand

This stand has been precision machined and hand finished, the panels have been recessed for your Roland TR8S to make sure it's held firmly in place.

The stand is assembled by connecting the side panels with 4x Confirmat Screws. All the fixings and an allen key to assemble your stand ready for use are provided.

Please note: you will get only the oak stand you must purchase your own Roland TR8S.

The item will need assembly as it is sent flat packed. All screws and tools are provided- this includes small rubber feet.

Notes: You are looking at custom-made Korg Volca QUAD Stand / End Cheeks.

This stand holds 4 Korg Volcas, although the Korg SQ1 will also fit.

This stand is made from MDF Fibreboard, and is connected via 16x allen head Confirmat screws (Allen Key & Screws Provided) into a mdf wood bar.

Please note: you will get plain MDF and not darker like in some of the photos.

These are a great addition to the Volcas, and give a much nicer look and working angle. You can also flip them round to have a much steeper angle if you prefer. These can also be painted with ease or stained with wood stain to suit your studio.

The Volcas fit snuggly into the stand so do not fully tighten the screws until the Volca is placed inside then tighten screws to hold in place firmly. Make sure you do this on a flat surface, to ensure the feet are correctly aligned.

The item will need assembly as they will be sent flat packed. All screws and tools are provided; this includes the small rubber feet. However, you must buy your own Korg Volca.

Notes: These solid oak end cheeks have been precision-machined and hand finished from FSC certified European Oak.

These cheeks have the option of 2 different working angles and heights to suit your needs.

The stand is assembled by removing the original aluminium end cheeks and replacing them with these, using the supplied 6x screws.

Please note: you will get only the 2x oak end cheeks, so you must purchase your own ASM Hydrasynth.

The item will need assembly as it is sent flat packed, all screws are provided this includes small rubber feet.

Notes: This stand has been precision CNC machined and hand finished from FSC Certified European OAK, the panels have been recessed for your Maschine MK3 to make sure its held firmly in place which is perfect for live and studio use.

A slight working angle has been added for your studio setup, which certainly helps when on a desktop.

The stand is assembled by connecting the side panels with 4x Confirmat Screws. All the fixings and an allen keys to assemble your stand ready for use are provided.

Please note: you will get only the oak stand- you must purchase your own NI Maschine MK3.

The item will need assembly as it is sent flat packed. All screws and tools are provided, this includes the small rubber feet.

Notes: This stand has been hand crafted from Solid Oak to give your Console 1 a much nicer working angle.

The stand is assembled by connecting the side panels with 4x Confirmat Screws. All the fixings and an allen key are provided, to assemble your stand ready for use.

The item will need assembly as it is sent flat packed. All screws and tools are provided; this includes the small rubber feet. However, you must buy your own Console 1.

Notes: Softube Console 1 & Console Fader Dual Solid Oak Custom Stand- fits MK1 & MK2.

This stand has been precision-machined from fully sustainable FSC approved European Solid Oak.

Both the Console 1 and Console Fader sit into a recess cut into the oak, to provide a solid and fixed stand once assembled which is what you need.

The stand is assembled by connecting the side panels with 8x Confirmat Screws you are provided with, and also an allen key to assemble your stand.

The item will need assembly as it is sent flat packed. All screws and tools are provided- this includes small rubber feet, however you must buy your own Console 1 & Console Fader.

DIMENSIONS:

34cm deep
17.5cm high (aprrox)

Notes: Softube Console 1 & Console Fader Dual Furniture Grade Plywood Custom Stand- fits MK1 & MK2.

This stand has been precision-machined from high quality furniture grade plywood. It is untreated, so it is ideal for staining or painting your own colour.

Both the Console 1 and Console Fader sit into a recess cut into the sides to provide a solid and fixed stand once assembled, which is what you need.

The stand is assembled by connecting the side panels with 8x Confirmat Screws which you are provided with, and also an allen key to assemble your stand.

The item will need assembly as it is sent flat packed. All screws and tools are provided, this includes small rubber feet- however you must buy your own Console 1 & Console Fader.

DIMENSIONS:
34cm deep
17.5cm high (approx.)

Notes: Softube Console 1 & Console Fader Dual Valchromat Custom Stand- fits MK1 & MK2.

This stand has been precision CNC machined from Valchromat High Density Fibreboard.

Both the Console 1 and Console Fader sit into a recess cut into the sides, to provide a solid stand once assembled.

The stand is assembled by connecting the side panels with 8x Confirmat Screws which you are provided with, and also an allen key to assemble your stand.

The item will need assembly as it is sent flat packed. All screws and tools are provided this includes small rubber feet- however you must buy your own Console 1 & Console Fader.

DIMENSIONS:
34cm deep
17.5cm high (approx.)

Notes: The tools we use to compose and produce music are dear to our hearts.

Boutique synthesizer brand Dreadbox are racking up an awesome range of electronic gear.

Dust, liquid and accidental impact have taken many a good unit down over the years - this is where Decksaver steps in.

Precision trimmed for perfect fit whilst accommodating cables, your Typhon can sit ready for operation.

Slides straight into a flight or soft case for maximum protection during transportation.

Shields delicate controls and internal components from damage at home, on the road and onstage.

Dimensions

Weight: 0.425kg
Length: 23.4cm
Width: 13.4cm
Height: 3.4cm

Notes: Guitar effects pedals are becoming more and more popular with DJs and producers with their ability to trigger the right noise at exactly the right time.

And whether you use Strymon pedals for processing other instruments, or even for your guitar, any unit that's regularly stomped on can suffer issues - and that's before we consider other stressors such as damage to switches or knobs during travel,or from dust, fluids or accidental impact.

These wonderful devices deserve care during downtime with the kind of protection only Decksaver covers can provide.

Precision moulded in-house to ensure a perfect fit whilst accommodating cables, your Strymon pedal can sit ready for operation.

Shields delicate controls and internal components from damage at home, on the road and in the studio.

Fits the NightSky and Volante pedals.

Dimensions

Weight: 0.235kg
Length: 18.1cm
Width: 11.8cm
Height: 3cm

Fits

Strymon NightSky
Strymon Volante

Notes: Guitar effects pedals are becoming more and more popular with DJs and producers with their ability to trigger the right noise at exactly the right time.

And if you're a guitarist with a taste for effects pedals, chances are you own or have played with or used a legendary Boss Stompbox at some point.

These units are are the world's best selling and can be found everywhere and cover a dazzling amount of effects. This is where Decksaver steps in.

Whether you use your Boss pedals for processing other instruments, or even for your guitar, any unit that's regularly stomped on can suffer issues - and that's before we consider other stressors such as damage to switches or knobs during travel,or from dust, fluids or accidental impact.

These wonderful devices deserve care during downtime with the kind of protection only Decksaver covers can provide.

Precision moulded in-house to ensure a perfect fit whilst accommodating cables, our cover shields delicate controls and internal components from damage at home, on the road and in the studio.

Fits all the Boss single pedal Stompboxes.

Dimensions

Weight: 0.16kg
Length: 13.5cm
Width: 8.4cm
Height: 3.8cm

Notes: A Producer looking for a professional, durable case solution for the Universal Audio Volt 1/ 2? Then look no further, UDG developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior this case provides protection against drops, scratches & liquids. Skillfully designed & moulded to fit the Universal Audio Volt 1/ 2, this case is perfect for the travelling Producer that needs to protect their equipment.

Specifications

Weight: 0,40 kg / 0.88 lbs

Colour: Black
Outer Dimensions (W x H x D) 20.0 x 14.7 x 6.3 cm | 7.9 x 5.8 x 2.5 inch
Inner Dimensions (W x H x D) 19.0 x 13.7 x 5.3 cm | 7.5 x 5.4 x 2.1 inch
Material: Durashock molded EVA foam
Protection: Cover main material 600D polyester with 5 mm EVA durashock molded body
Water repellent laminated nylon exterior
Black soft fleece interior
Protective top removable foam

Extras

Removable divider for extra cables or power adapter
Heavy duty handle
Easy grip zipper pulls

Fits

Universal Audio Volt 1 or Volt 2, power adapter, extra cables

Notes: The CTRL Case MPC ONE is custom designed to a hold the new AKAI MPC ONE and is a very lightweight and convenient solution to carry your sampling workstation well protected to your next studio or live session. Crafted from rigid Durashock molded EVA shell and a high-density foam interior it is furthermore equipped with an accessory panel to organize audio cables and accessories.

FITS:
Akai MPC One

SPECS
Outer measures: 32 x 32 x 13,5 cm
Inner measures: 28 x 28 x 10 cm
Weight: 0,8 kg

Notes: The XLR-ID is a set of eight colour-coded rings that can be affixed to any XLR plug to assist with cable identification. The colours of the rings match the colours used for each of the microphone channels on the RØDECaster Pro.

Notes: Soft case - will ensure the safety of your instruments! Best quality from Cordura with exclusive material finishing with red thread. They are not so heavy as hard cases. High quality embroidered Lyra-8 logo. Very low weight!

(Protection - 1 cm hard foam made from Cordura: Cordura is the brand name for a collection of fabrics used in a wide array of products including luggage, backpacks, trousers, military wear and performance apparel. Cordura fabrics are known for their durability and resistance to abrasions, tears and scuffs.)

Notes: A Digital DJ looking for a professional, durable case solution for your Akai Force? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Akai Force, these cases are perfect for the travelling DJ that needs to protect their equipment.

Notes: A Digital DJ looking for a professional case solution for your NI Maschine MIkro MK3 interface? Then don't look further as UDG has developed a super light EVA Hardcase Protector designed for life on the road. The UDG Creator NI Maschine Mikro MK2 Hardcase Protector is constructed from durable lightweight compression moulded EVA material with a laminated Nylon exterior. The Case provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the NI Maschine Mikro MK3 Interface, the Case is perfect for the travelling artists that needs to protect their equipment.

Specifications

Colour: Black
Weight: 0,65 kg / 1.43 lbs
Outer Dimensions (W x H x D) 36.0 x 21.1 x 5.8 cm | 14.1 x 8.3 x 2.3 inch
Inner Dimensions (W x H x D) 32.5 x 18.2 x 4.8 cm | 12.8 x 7.2 x 1.7 inch
Material: Durashock molded EVA foam
Protection: Soft fleece interior

Extras:

Easy grip zipper puller
Heavy duty handle

Fits:
NI Maschine Mikro MK3 interface.

Notes: A professional guitarist/ musician looking for a professional, durable case solution for your Universal Audio OX Amp Top Box? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Universal Audio OX Amp Top Box, these cases are perfect for the travelling guitarist/ musician that needs to protect their equipment.

Specifications

Colour: Black
Weight: 1,40 kg / 3.08 lbs
Outer Dimensions (W x H x D): 42.5 x 28.8 x 15.0 cm | 16.7 x 11.3 x 5.9 inch
Inner Dimensions (W x H x D): 38.5 x 23.4 x 14.0 cm | 15.1 x 9.2 x 5.5 inch
Material: Durashock moulded EVA foam

Protection:

Water repellent laminated nylon exterior
Black soft fleece interior

Extras

Heavy duty handle
Easy grip zipper puller

Fits

Universal Audio OX Amp Top Box

Notes: The instruments we employ for crafting and bringing music to life hold a special place in our hearts. Throughout the years, the relentless forces of dust, liquid spills, and unfortunate accidents have claimed the functionality of many cherished synthesizers. This is precisely where Decksaver steps in.

Meticulously designed to offer a flawless fit while accommodating cables, this Decksaver cover ensures that your Behringer Pro-800, K-2, Toro, Neutron, or PRO-1 synthesizer is always poised for action. It serves as a robust shield, safeguarding the intricate controls and delicate internal components of your instrument, whether it's in the comfort of your home, the creative confines of your studio, or the electrifying stage.

What sets this Behringer cover apart is the proprietary Soft-fit technology, which delivers an additional layer of protection to those susceptible wooden cheek panels that grace these exceptional synthesizers.

Fits:

K-2
Neutron
PRO-1
Toro
PRO-800

Dimensions:

Weight: 0.75 kg
Length: 43.6 cm
Width: 14.8 cm
Height: 6.6 cm

Notes: A Digital DJ/ Producer looking for a professional, durable case solution for your Universal Audio Apollo X4? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skillfully designed & moulded to fit the Universal Audio Apollo X4, these cases are perfect for the travelling DJ/ Producer that needs to protect their equipment.

Color: Black
Weight: 0,77 kg / 1.694 lbs
Outer Dimensions (W x H x D): 27.8 x 20.2 x 7.6 cm | 10.9 x 7.9 x 2.9 inch
Inner Dimensions (W x H x D): 23.8 x 16.2 x 6.6 cm | 9.4 x 6.4 x 2.6 inch
Material: Durashock molded EVA foam
Protection: Soft fleece interior
Extra's:
Heavy-duty handle
Convenient carry handle
Easy grip zipper puller

Fits Universal Audio Apollo X4

Please note: The Audio Apollo X4 is not included in this purchase, it is shown for demonstration purposes only.

Notes: A Digital DJ looking for a professional, durable case solution for your Akai MPC One+ controllers? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skillfully designed & moulded to fit the Akai MPC One+ controllers, these cases are perfect for the travelling DJ that needs to protect their equipment.

Specifications:

Color: Black
Weight: 0,56 kg / 1.232 lbs
Outer Dimensions (W x H x D): 38.3 x 28.6 x 6.7 cm | 15.1 x 11.2 x 2.6 inch
Inner Dimensions (W x H x D): 37.3 x 27.6 x 5.7 cm | 14.6 x 10.8 x 2.2 inch
Material: Durashock molded EVA foam
Protection: Soft fleece interior

Extra's:
Heavy-duty handle
Convenient carry handle
Easy grip zipper puller

Fits: Akai MPC One+, Akai MPC One, power adapter & extra cables

Please note: The Akai MPC One Controller is not included in this purchase, it is shown for demonstration purposes only.

Notes: Protective hard case for Midi Fighters

Molded case with rugged ripstop shell designed to prevent impact and scratching damage to controllers

Designed by DJ Techtools team to fit Midi Fighter Twisters, Spectras, 3Ds, and Classics.

Includes additional organization pockets and loops for cables, adapters, and more

The Chroma Case for the Midi Fighter Spectra, Midi Fighter Twister, 3D, and Classic is designed to be a high-quality protective enclosure for your controller. The lightweight design is made to be a snug fit for the Midi Fighter while also providing a few extra spots for accessories or cables.

The Chroma Case works perfectly in tandem with our Chroma Cover - an impact resistant lid that doubles as a stand for the same Mdii Fighter units.

Notes: The Backpack is made from high-quality materials, including a soft, durable Alcantarar handle, ballistic nylon straps and water-resistant exterior, it is rugged and hard-wearing.

It can accommodate a RODECaster Pro II, plus microphones, studio arms and other accessories, as well as laptops up to 16 inches. Ergonomic adjustable shoulder straps with back and chest support ensure absolute comfort, with exterior pockets and compartments providing additional storage.

RODE BACKPACK Features:

Designed to exact specifications of the RODECaster Pro II
Lightweight and highly durable
Accommodates microphones and accessories
Laptop compartment (16")
Water resistant
Interior dimensions: 495 x 304mm
18L internal capacity

Notes: Spring tank for use with the Field Kit FX. This is a 8BB3C1B tank with 3 springs (23.5cm length each) and long decay time of up to 4s. Input isolated, output grounded.

A short and shielded RCA is recommended (available elsewhere). If you have a cable of your own, take the shortest one that fits your needs and make sure it's properly shielded.

Keep the cables and tank away from noise sources as much as you can, especially power adapters and power cables.

Please note: there is no cable included with this product.

Notes: Spring tank for use with the Field Kit FX. This is a 8BB3C1B tank with 3 springs (23.5cm length each) and long decay time of up to 4s. Input isolated, output grounded.

The short and shielded RCA cable offered with the tank is recommended. If you have a cable of your own, take the shortest one that fits your needs and make sure it's properly shielded.

Keep the cables and tank away from noise sources as much as you can, especially power adapters and power cables.

Notes: A portable interface needs a secure and mobile case! The compact GLIDE case features a soft, velvet-lined interior to keep your 2i2 looking new, and you'll have plenty of room to store cables in the mesh compartment built into the lid. The compact GLIDE case is designed to keep the footprint of your 2i2 small and lightweight while protecting your gear.

Description

The GLIDE case for the Focusrite 2i2 is custom molded to fit your interface perfectly without taking away from its portability. The case is made from the durable EVA material designed to protect your interface when you throw it in your backpack or carry it to and from your session.

The interior of the GLIDE case features a mesh pocket for storing any extra cables you might have. The soft, velvet-lined interior will protect the sleek exterior of the 2i2 while keeping the knobs and inputs safe from knocks and debris. Become as portable as you need to be while knowing your Focusrite 2i2 will be looking good as new!

Specifications

Custom molded to the exact dimensions of the Focusrite 2i2
Separate storage pocket for cables
Durable EVA exterior
High-quality, velvet-lined interior
Interior: (7.68 x 4.09 x 2.2) inches
Exterior: (8.19 x 4.92 x 2.68) inches

Notes: Introducing the Stand for Korg KAOSS Pad - the ultimate solution for enhancing your music production experience while keeping your studio organized. Designed with ergonomics and durability in mind, this stand is meticulously crafted to elevate your Korg KAOSS Pad to a new level of functionality and convenience.

Constructed using ecologic PLA material, this stand not only offers exceptional sturdiness but also boasts eco-friendly attributes. PLA is a biodegradable and renewable material derived from plant-based sources. With this conscientious choice, you can take pride in reducing your environmental footprint without compromising on quality.

The ergonomics of the Stand for Korg KAOSS Pad are carefully engineered to optimize your workflow and maximize your comfort. Its thoughtfully angled design places your KAOSS Pad at the perfect height and angle, allowing for effortless interaction and intuitive control. Say goodbye to strained wrists and discomfort during long studio sessions, as this stand ensures a natural and relaxed position while you unleash your creativity.

This stand has been built this stand to withstand the test of time, and with the demands of a busy studio environment in mind. Its robust construction ensures stability, keeping your KAOSS Pad secure while you unleash your musical genius. Whether you're a professional producer or an aspiring musician, you can trust this stand to handle the rigors of your creative endeavours.

Beyond its practicality, the Stand for KAOSS Pad adds a touch of style to your studio setup. Its sleek and minimalist design complements any workspace, allowing you to showcase your gear with pride. The stand's black finish and clean lines exude a professional aesthetic that perfectly aligns with the modern musician's taste.

Don't let a cluttered studio hinder your creative flow. With the Stand for KAOSS Pad, you can keep your workspace tidy and organized. Its compact footprint takes up minimal space, leaving you with more room to manoeuvre and create. No more tangled cables or misplaced equipment - simply position your KAOSS Pad on this stand, and you'll have everything within easy reach, ensuring a seamless production process.

Upgrade your music production setup with the Stand for Korg KAOSS Pad today. Experience the perfect blend of ergonomics, durability, and eco-friendliness, all wrapped in a sleek design. Unleash your creativity, enjoy a more comfortable workflow, and make a positive impact on the environment - all with this exceptional stand.

Notes: Introducing the Ergonomic Studio Stand for Ableton Push 3: a game-changer in the world of music production. Designed with your comfort and productivity in mind, this stand is the ultimate solution for those seeking a more immersive and ergonomic music-making experience.

Crafted with precision, the stand offers a sleek and sturdy design that seamlessly integrates with your Ableton Push 3 controller. By elevating your controller to an optimal height and angle, it eliminates the strain on your wrists and neck, allowing you to focus on your creativity without any discomfort.

One of the standout features of this stand is its ability to enhance your visual experience. With a specially designed screen mount, it brings the Ableton Push 3's display closer to your line of sight, ensuring crystal-clear visibility of every detail. No more squinting or straining your eyes to read parameters or follow your music-making process. The screen becomes an extension of your creativity, effortlessly accessible at all times.

The stand's ergonomic design also promotes a more organized and efficient workspace. Its integrated cable management system keeps your cables neat and tangle-free, reducing clutter and allowing you to concentrate fully on your music production. Additionally, the stand's robust construction ensures stability, even during intense sessions, guaranteeing a secure and reliable platform for your Ableton Push 3.

Whether you're a professional music producer or an aspiring artist, the Ergonomic Studio Stand for Ableton Push 3 offers unparalleled comfort and convenience. It enhances your workflow, minimizes physical strain, and maximizes your creative potential. Take your music production to new heights with this exceptional accessory that is both stylish and functional.

Upgrade your studio setup today and revolutionize the way you create music with the Ergonomic Studio Stand for Ableton Push 3. Experience comfort, visual clarity, and an improved working environment that will elevate your musical journey to new levels of excellence.

Notes: Dual Oak Veneer stand for the Roland Aira Compact Range S1, E4, J6 & T8

This stand has been precision machined form Oak Veneered MDF and fits any 2 of the Roland Aira Compact models.

Once assembled this takes up a much smaller footprint in the studio and gives you much better working angles.

The units are held in place into a recess into the side panels so are rock solid once assembled.

Please note you will only receive a wooden stand, you must purchase your own Roland Aira Compact Synths and Drum Machine.

A single version and triple versions are also available.

Notes: Dual Black Valchromat HDF stand for the Roland Aira Compact Range S1, E4, J6 & T8

This stand has been precision machined form black Valchromat HDF and fits any 2 of the Roland Aira Compact models.

Once assembled this take up a much smaller footprint in the studio and gives you much better working angles.

The units are held in place into a recess into the side panels so are rock solid once assembled.

Please note you will only receive a wooden stand, you must purchase your own Roland Aira Compact Synths and Drum Machine.

A single version and triple versions are also available.

Notes: Dual MDF stand for the Roland Aira Compact Range S1, E4, J6 & T8

This stand has been precision machined form MDF and fits any 2 of the Roland Aira Compact models.

Once assembled this take up a much smaller footprint in the studio and gives you much better working angles.

The units are held in place into a recess into the side panels so are rock solid once assembled.

Please note you will only receive a wooden stand, you must purchase your own Roland Aira Compact Synths and Drum Machine.

A single version and triple versions are also available.

Notes: Triple MDF stand for the Roland Aira Compact Range S1, E4, J6 & T8

This stand has been precision machined from MDF and fits any 3 of the Roland Aira Compact models.

Once assembled this take up a much smaller footprint in the studio and gives you much better working angles.

The units are held in place into a recess into the side panels so are rock solid once assembled.

Please note you will only receive a wooden stand, you must purchase your own Roland Aira Compact Synths and Drum Machine.

A single version and triple versions are also available.

Notes: Triple Oak Veneer stand for the Roland Aira Compact Range S1, E4, J6 & T8

This stand has been precision machined form Oak Veneered MDF and fits any 3 of the Roland Aira Compact models.

Once assembled this take up a much smaller footprint in the studio and gives you much better working angles.

The units are held in place into a recess into the side panels so are rock solid once assembled.

Please note you will only receive a wooden stand, you must purchase your own Roland Aira Compact Synths and Drum Machine.

A single version and triple versions are also available.

Notes: Black Valchroimat triple stand for the Roland Aira Compact Range S1, E4, J6 & T8

This stand has been precision machined form Oak Veneered MDF and fits any 3 of the Roland Aira Compact models.

Once assembled this take up a much smaller footprint in the studio and gives you much better working angles.

The units are held in place into a recess into the side panels so are rock solid once assembled.

Please note you will only receive a wooden stand, you must purchase your own Roland Aira Compact Synths and Drum Machine.

A single version and triple versions are also available.

Notes: Dual Angle 8U Rackmount MDF stand for the Behringer 2600 Range

This stand has been precision machined from MDF and fits any of the 8u Behringer 2600 Synths, It comes complete with 8U Rails and all the Screws/Washers and Cage nuts provided.

Once assembled this allows you to choose from 2 working angles either shallow or steep depending on how you like it.

Please note you will only receive 2x MDF Side Panels with 2x 8u Rails with 8x Nuts/screws and washers, you must purchase your own Behringer 2600 Synth

Other versions are also available in Oak Veneered MDF and Black Valchromat.