Recording Studio Accessories

Notes: Type 1 - Blue Reverb

Features:
Compact and low cost type
2 natural coil spring type
Input impedance are changeable
Length of connect wire are changeable by optional

Application:
Specially suited for small wattage amplifier
For electric organs, guitar amplifier
Ideally suited for practice amps
2 Springs Type

Notes: 1.5mm thick zinc coated steel equipment racks finished in black scratch resistant textured powder coated paint. Supplied in flat packed kit form for easy self assembly.

Notes: A compact megaphone with folding handle and wrist strap for ultimate portability. Announcements are amplified from the integral rear microphone up to 10W output with an optional siren for alerts. Easy to carry and store yet capable of delivering impressive sound projection.

Notes: A compact megaphone with folding handle and wrist strap for ultimate portability. Announcements are amplified from the integral rear microphone up to 10W output with a loop player/recorder for automated announcements. Easy to carry and store yet capable of delivering impressive sound projection.

Notes: Bumper case in extra rugged silicone. For extra protection on the go. Made from 100% recycled silicone.

Notes: Protective carry case with a soft velvet liner shaped for UNIT-4. Featuring a comfortable strap and netting pockets to bring your whole setup on the go.

Notes: The Blackbox and Bluebox gives you complete recording and mixing capabilities in the palm of your hands. With a portable sampler and mixer this powerful, you're going to want a case to protect it while you're on the go.

The GLIDE case for the Blackbox and Bluebox is custom molded to fit perfectly, exactly without taking away from the amazing portability of the device. The high resolution touch screen on the Blackbox and Bluebox are great for writing full songs or applying effects with a minimal design, so a case that prevents any scratches or cracks will be a lifesaver.

The GLIDE Case is made of durable and stress tested EVA material, which will prevent any damage from drops or spills, and it also features an interior pocket to hold any cables for recording in the wild.

Custom designed for the 1010music Blackbox and Bluebox

Durable molded EVA exterior

Super-soft velvet lining

Interior dimensions: 6.25 x 5.5 x 1.5

Notes: Extend your Large XTS Stand's functionality with a Flex Tray: the perfect solution for using multiple pieces of gear on a single desktop stand!

The XTS Flex Tray is available in two lengths: 13.3" or 17.7". It attaches easily and securely to your Large XTS Stand, with no tools required.

The 13.3" Flex Tray can hold 2-3 small pedals or synths. The 17.7" Flex Tray can fit an Elektron Digitakt and Digitone, two SP-404s, 2 large pedals like a Strymon BigSky or Timeline, or up to 6 compact pedals like Chase Bliss.

The XTS Flex Tray is compatible with the Large XTS Stand. For other XTS Stand size options, check out our complete XTS Desktop Stand System.

Flex Tray for Large XTS Stand
Xtend your XTS Stand's functionality
Use multiple pieces of gear on a single desktop stand
2 sizes available for ultimate versatility
Crafted from 100% solid sheet metal

Specs

13.3" Flex Tray

Length: 13.3"
Width: 8.3"
Weight: 2.9 lbs
Fits 2-3 small pedals or synths

Notes: Pulse case for 13" Macbook Pro or Air

This case is compatible with the 13" M1 MacBook Pro, and the M1 and M2 MacBook Air. It is also compatible with all 2016 - 2019 13" MacBook Pro models, and the 2018-2019 MacBook Air models.

The ultimate case for your 13" MacBook Pro or Air! The Analog Cases PULSE MacBook Pro or Air Case has been carefully designed to the unique needs of highly mobile creative professionals. If you demand the highest level of protection for your MacBook Pro, the PULSE Case will deliver.

The case features a die-cut EVA foam insert that is custom-fitted to the exact dimensions of the 13" MacBook Pro or Air. In the unfortunate event of any falls, the EVA material is shock-resistant and will absorb the blow to prevent any damage to your laptop.

A spacious storage area underneath the laptop has a dedicated compartment for your charger, plus an additional large compartment that is a perfect fit for many popular external hard drives such as LaCie or Western Digital. The upper lid of this case features two additional storage pockets for your cables and accessories.

This case also features a super-soft velvet interior lining, ballistic nylon exterior, comfortable and ergonomic handle, and the signature sleek and minimalist aesthetics.

Description

Whether you're a music producer, photographer, video editor, or podcaster, you'll appreciate the serious protection, versatile storage options, and compact design of the rigid molded case.

The PULSE MacBook Pro or Air case is the ONLY case that features a die-cut EVA foam insert that is custom-fitted to the exact dimensions of the 13" MacBook Pro or Air.

As a creative professional, your external hard drive, battery packs, and cables are just as important as your laptop itself. That's why this case has been designed for maximum versatility and storage capacity. A spacious storage area underneath your MacBook Pro has a dedicated compartment for your charger, plus two other large compartments.

And that's not all. The upper lid of this case features two additional storage pockets for your cables and accessories, which are separated by a padded divider to keep everything organized and protected. The storage pockets can be securely sealed with a velcro strap to ensure that your gear remains in place during travel.

Specifications

Die-cut EVA foam insert customized to the exact dimensions of the 13" MacBook Pro

3 dedicated storage compartments for accessories that measure:

- 10.35" x 2.68" x 1"
- 6.73" x 5.83" x 1"
- 3.62" x 3.15" x 1"

2 interior storage pockets, each measuring 13.58" x 6.5"
Exterior case dimensions: 14.33" x 9.76" x 3.11"
Weight: 3.4 lbs

Notes: Transport case for 14" Macbook Pro

This carrying case from Analog Cases is specially designed for the 14" Macbook Pro.

In contrast to conventional nylon bags, the cases of the PULSE line are made of sturdy EVA (a moulded polymer that has so far only been used for high-quality housings in consumer electronics). It retains its shape and provides excellent protection. The sturdy carrying strap and low weight make the PULSE Case the ideal companion for a variety of common mini controller keyboards, smaller electronic musical instruments or audio interfaces. Inside, the separate nylon mesh pocket brings order to the cable chaos.

Analog Cases stands for practical and stylish design. The robust and lightweight bags are designed for modern music creators whose equipment is as mobile as their lifestyle. About its name, the manufacturer says:

"The name Analog Cases reflects our design philosophy: Bags should be simple, cool and stylish. For us, analogue is more than just a kind of sound - it's a way of life. Analogue means timeless, creative and beautiful. That's what motivates us to make music, and it's what motivates us to create cases."

Notes: Extend your Large XTS Stand's functionality with a Flex Tray: the perfect solution for using multiple pieces of gear on a single desktop stand!

The XTS Flex Tray is available in two lengths: 13.3" or 17.7". It attaches easily and securely to your Large XTS Stand, with no tools required.

The 13.3" Flex Tray can hold 2-3 small pedals or synths. The 17.7" Flex Tray can fit an Elektron Digitakt and Digitone, two SP-404s, 2 large pedals like a Strymon BigSky or Timeline, or up to 6 compact pedals like Chase Bliss.

The XTS Flex Tray is compatible with the Large XTS Stand. For other XTS Stand size options, check out our complete XTS Desktop Stand System.

Flex Tray for Large XTS Stand
Xtend your XTS Stand's functionality
Use multiple pieces of gear on a single desktop stand
2 sizes available for ultimate versatility
Crafted from 100% solid sheet metal

Specs

17.7" Flex Tray

Length: 17.7"
Width: 8.3"
Weight: 3.75 lbs
Fits 2 large pedals, Elektron Digitakt and Digitone, two SP-404s, or two similar size machines
Fits 5-6 small pedals

Notes: The perfect case for Pocket Operators power users and Teenage Engineering super-fans! Now you can safely transport your entire Pocket Operator collection in one lightweight and user-friendly case. With its compact size, these GLIDE case packs easily into your backpack, so you can make music anywhere and everywhere.

Description:

This case has been carefully designed with a die-cut EVA foam insert that's customized for storing 3 Pocket Operators. It's simple to take your Pocket Operators in and out of the case, and the custom-cut foam ensures they'll be snugly cushioned and secure while you're on the go. And if you only use 2 Pocket Operators, the extra slot makes a great storage area for additional cables.

Like all GLIDE cases, this case is lightweight, with a durable and rigid exterior. The interior features a nylon mesh pocket for extra storage, and a soft velvet lining. Your Pocket Operators are going to love it!

Specifications:

Perfect fit for 3 Pocket Operators (can also fit one or two)

Lightweight and durable

Ultra-compact and totally flat

Durable molded exterior

Interior dimensions: 3 spaces each; 4.2 x 2.7 x 0.7 inches

Notes: The ultra-mobile MPC One deserves an ultra-mobile case. But you don't need to sacrifice protection for the sake of mobility. Our new PULSE case is easy to travel with, but it won't let you down. It's been carefully designed with premium materials, and it's custom-molded to the exact dimensions of the MPC One.

This case features a die-cut foam insert, so your MPC One will be totally secure and cushioned. With separate cut-outs on both sides of your MPC One, it's easy to reach in and remove your machine from the case. The exterior is molded from extra-thick EVA material that's rigid and holds its shape.

Whether you pack this case into a larger backpack or rolling suitcase, or carry it by the spacious and lightweight handle, its a great solution for protecting your MPC on the go.

Interior dimensions: 10.75 x 11 x 2.5 inches

Notes: PULSE Case for the Akai MPK Mini Play

Customized to the exact dimensions of the MPK Mini Play
Also a fits all earlier versions of the MPK Mini
Rigid moulded case that provides excellent protection
Super-soft velvet interior and spacious pocket for cables

The PULSE Case for the Akai MPK Mini Play has been designed to make the most out of your portable controller. Featuring a rugged exterior and comfortable handle, it's perfect for taking your creativity out into the wild. With a design that can also accommodate all earlier versions of the MPK Mini, the PULSE case is ideal for the modern performer and producer!

The PULSE Case has been custom-designed to accommodate the exact dimensions of the Akai MPK Mini Play. Made out of a moulded EVA material, the PULSE case will protect the knobs, keys, and pads during transport.

The PULSE cases interior is lined with black velvet material to prevent scratches or marks on your Akai MPK Mini Play. The PULSE Case also includes a mesh pocket for storing any additional USB or patch cables you might have. If you're throwing your controller in your backpack or stepping out into the live environment, the PULSE case is a perfect choice!

Specifications

Perfect fit for your Akai MPK Mini
Made from lightweight and durable EVA material
Internal storage pocket for cables
Custom moulded interior
High-quality black velvet lining
Exterior: (13.82 x 7.68 x 2.56) Inches

Notes: The PULSE case is the perfect case for your Akai APC64: an ideal travel solution for mobile producers and musicians.

PULSE cases are made of rigid moulded EVA material that is durable and lightweight, while providing excellent protection. The 100% premium materials include a ballistic nylon exterior, super-soft velvet interior, and an ultra-smooth zipper.

With a spacious storage pocket for cables, and a comfortable handle, this case comes equipped with all the features you'll need for travel. Ultra-compact and totally flat, it can also pack easily into your backpack, carry-on, or a larger flight case.

PULSE Case For Akai APC64
Perfect fit for the Akai APC64
Rigid moulded case that provides excellent protection
Super-soft velvet interior and spacious pocket for cables
Compact and lightweight

Specifications

Perfect fit for your Akai APC64
Versatile and lightweight
Spacious and comfortable handle
High-quality Analog Cases logo zipper puller
Exterior Dimensions: 17.90 x 13.20 x 2.00 Inches

***Please note: the APC64 is not included, it is shown in the pictures for demonstration purposes only. ***

Notes: Taking your creativity on the go is easy with our PULSE Case for the Akai MPC Studio 2! With a rigid exterior made from molded EVA material and a plush velvet interior, you can feel confident knowing your MPC Studio 2's LCD screen and touch-sensitive pads are totally protected. This ultra-compact and totally flat case will pack easily into your backpack, so you can use the entire world as your studio!

Description

These PULSE cases are made from a durable EVA material that is custom molded to your Akai MPC Studio 2. This secure fit will prevent your MPC from shifting and moving if you throw your case into your backpack or luggage when you're on the move.

The nylon strap makes carrying this case a breeze and the secure fit will prevent your MPC from shifting and moving as you throw your case into your backpack or luggage.

The interior of the PULSE case features a mesh pocket for storing extra cables or notes. The case is also lined with high-quality, soft velvet. This ensures that the sleek exterior, LCD screen, and pads are protected as you move.

Specifications

Custom molded to the Akai MPC Studio 2
Made from a lightweight and durable EVA material
Internal storage pocket for extra cables
Lightweight and easy to carry
Exterior: 14.76 x 8.46 x 2.56

Notes: The ultimate case for your 16" or 15" MacBook Pro! Compatible with the 2022, 2021 or 2020 16" MacBook Pro, or the 2016-2019 15" MacBook Pro.

The Analog Cases PULSE MacBook Pro Case has been carefully designed to the unique needs of highly mobile creative professionals. If you demand the highest level of protection for your MacBook Pro, our PULSE Case will deliver.

The case features a die-cut EVA foam insert that is custom-fitted to the exact dimensions of both the 16" / 15" MacBook Pro. In the unfortunate event of any falls, the EVA material is shock-resistant and will absorb the blow to prevent any damage to your laptop.

A spacious storage area underneath the laptop has a dedicated compartment for your charger, plus two other large compartments that are a perfect fit for many popular external hard drives such as LaCie or Western Digital. The upper lid of this case features two additional storage pockets for your cables and accessories.

This case also features a super-soft velvet interior lining, ballistic nylon exterior, comfortable and ergonomic handle, and our signature sleek and minimalist aesthetics.

Description

Whether you're a music producer, photographer, video editor, or podcaster, you'll appreciate the serious protection, versatile storage options, and compact design of our rigid molded case.

The PULSE MacBook Pro case is the ONLY case that features a die-cut EVA foam insert that is custom-fitted to the exact dimensions of the 16" or 15" MacBook Pro.

As a creative professional, your external hard drive, battery packs, and cables are just as important as your laptop itself. That's why this case has been designed for maximum versatility and storage capacity. A spacious storage area underneath your MacBook Pro has a dedicated compartment for your charger, plus two other large compartments.

And that's not all. The upper lid of this case features two additional storage pockets for your cables and accessories, which are separated by a padded divider to keep everything organized and protected. The storage pockets can be securely sealed with a velcro strap to ensure that your gear remains in place during travel.

Specifications

Die-cut EVA foam insert customized to the exact dimensions of the 16" or 15" MacBook Pro

3 dedicated storage compartments for accessories that measure:
- 12" x 3.3" x 1.1"
- 7.2" x 3.2" x 1.1""
- 3.7" x 3.2" x 1.1"

2 interior storage pockets, each measuring 15.4" x 8.3"

Exterior case dimensions: 18.75" x 12.5" x 3.25"
Interior case dimensions: 16.4" x 11" x 3"
Weight: 3.4 lbs

Notes: The first and only case for the Arturia BeatStep Pro! The PULSE controller case is a versatile and lightweight case for mobile electronic musicians.

Description:

Unlike traditional nylon keyboard bags, PULSE cases are made from rigid EVA that holds its shape and provides excellent protection, and they feature a molded rubber handle that's tough and comfortable. This case also includes a nylon mesh compartment for holding your cables.

Weighing in at only 1 pound, this case is a breeze to haul around town. It looks great and is built to last, and can also be used to carry a wide variety of smaller devices.

Specifications:

Perfect fit for your Arturia BeatStep Pro

Separate compartment for holding cables

Bottom foam insert to protect your controller (removable)

Interior dimensions: 18 x 7 x 2.5 inches

Exterior dimensions: 19 x 8.75 x 3.4 inches

Notes: The small-but-powerful Arturia KeyStep deserves real protection when you're on your next music-making excursion. The PULSE case is the first and only case that is specially designed to fit the KeyStep.

Description:

This PULSE case is versatile and lightweight, with a molded rubber handle that makes it easy and comfortable to carry. The durable molded exterior is rigid and shock-resistant, providing excellent protection, while the interior features a super-soft velvet lining. You won't find this kind of protection with a generic gig bag.

Weighing in at only 1 pound, our PULSE case won't add unnecessary weight to your load. There's even an interior mesh pocket for holding cables and accessories.

Specifications:

Perfect fit your Arturia Keystep and other similarly-sized 32-key controllers

Separate compartment for holding cables

Bottom foam insert to protect your keyboard (removable)

Interior dimensions: 20 x 7 x 2.5 Inches

Exterior dimensions: 20.75 x 8.4 x 3.4 Inches

Notes: Building off the legacy of Analog Cases' best-selling KeyStep case, the PULSE Case for the new KeyStep Pro provides the same great protection you've come to expect from Analog Cases. This case is custom-molded to the exact dimensions of the KeyStep Pro, providing a perfect fit. Space for the power supply is also included.

Description:

If you're looking for a quality travel case for your KeyStep Pro, don't settle for a generic bag that doesn't have the proper fit. This PULSE case is made from sturdy molded EVA material that's rigid and holds its shape. It looks great and provides proper protection while you're on the move.

Analog Cases use premium materials that are made to last, so you'll never have to worry about your KeyStep Pro when it's packed up. With its durable exterior, soft velvet lining, and interior pocket for extra storage, this case is all you'll need to keep your KeyStep Pro in good condition and working properly.

Specifications:

Perfect fit for your Arturia KeyStep Pro + power supply

Durable and lightweight

Comfortable molded handle

Extra large premium zipper

Spacious interior pocket

Interior dimensions: 24.5 x 8.5 x 2.5 inches

Exterior dimensions: 26.25 x 11 x 3.25 inches

Notes: This PULSE case is molded to the exact dimensions of the Arturia MicroFreak / MiniLab / MicroBrute. It provides excellent protection for your synth, and is extremely lightweight.

PULSE cases are made from rigid EVA that holds its shape, and they feature a molded rubber handle that's tough and comfortable. This case also includes a nylon mesh compartment for holding your cables.

Weighing in at only 1 pound, this case is a breeze to haul around town. It looks great and is built to last, and can also be used to carry a wide variety of smaller devices.

Perfect fit for your Arturia MicroFreak, MiniLab or MicroBrute

Separate compartment for holding cables

Spacious and comfortable handle

Bottom foam insert to protect your keyboard (removable)

Interior dimensions: 15.25 x 9.25 x 2.5 inches

Exterior dimensions: 16.5 x 10.5 x 3.25 inches

Notes: Audient's premium audio interfaces require a high quality case for protection, and Analog Cases have designed a travel solution for all your needs.

Description:

The Audient iD14 has a solid metal exterior that could get scratched or scuffed if you're not careful. Our PULSE case features an extra-soft black velvet interior to caress the metal body of the iD14. Now you can take this audio interface into the wild, while having peace of mind that you won't damage the delicate switches or scroll wheel.

The PULSE case for the Audient iD14 has enough space to store the power adapter, while being a snug fit so the interface remains securely in place during travel. We've also included an interior pocket for storing any additional audio cables. Take the power of your studio with you on the go!

Specifications:

Perfect fit for your Audient iD14

Durable and lightweight

High quality Analog Cases logo zipper puller

Interior dimensions: 9.3 x 4.6 x 2.5 inches

Notes: Keep your Behringer semi-modular synths safe on the go with this compact and user-friendly case. Whether you own a Behringer Neutron, PRO-1 or K-2 - or even all three - this PULSE case is the perfect solution to protect your synth. It's custom molded to the exact dimensions of Behringer's 80HP synthesizer modules.

Description:

The PULSE case comes with a storage compartment that's perfect for carrying all your patch cables, and is also spacious enough to hold your synth's power supply. The interior is lined with soft velvet to protect the knobs of your synth. Made with a high quality zipper and strong material, our case is perfect for your desktop modules.

This case is specifically designed for the Neutron, PRO-1 or K2, but it's also a great solution for your smaller Behringer synths like the Model D or WASP.

Specifications:

Perfect fit for your Neutron / Pro-1 / K2 + cables

Versatile and lightweight

Spacious and comfortable handle

High quality Analog Cases logo zipper puller

Interior dimensions: 16.75 x 6 x 3.75 inches

Exterior dimensions: 18 x 7.75 x 4.3 inches

Notes: Take the acid techno sounds of the Behringer TD-3 on the road with the new PULSE case. Your lightweight and portable TD-3 deserves a sturdy case for protecting it on the go, and the PULSE case has been carefully designed to do just that. It's also an excellent solution for owners of the Behringer CRAVE or RD-6.

Description:

This case was constructed using only premium materials that provide serious protection for the long haul. With a rigid, durable exterior and soft velvet lining, you'll never have to worry about the condition of your TD-3, CRAVE, or RD-6 while it's in the case.

Specifications:

Perfect fit for your Behringer TD-3, CRAVE, or RD-6

Soft velvet lining

Durable molded EVA exterior

Comfortable handle

Spacious interior pocket

Interior dimensions: 13 x 6.25 x 2.25 inches

Exterior dimensions: 14.5 x 7.5 x 2.75 inches

Notes: Keep your headphones safe for many sessions and gigs to come with the PULSE Case For Studio Headphones! This durable molded case can fit any model of professional studio monitor headphones from Beyerdynamic, Sennheiser, Shure, Sony, Audio-Technica, and other leading brands. Like all PULSE cases, this case is compact and ultra-lightweight, so it's easy to travel with.

Description

The PULSE Case for Studio headphones is made from durable and lightweight EVA, designed to protect and preserve your headphones during transport. EVA is often used in sports equipment for its shock-absorbing capabilities, so you be confident your studio headphones will be well protected. The case's interior is lined with soft velvet, which will help prevent scratches and any snags on your headphones.

The PULSE Case For Studio Headphones is a universal case that can fit any professional studio monitor headphones. This includes the most popular models from Beyerdynamic, Sony, Sennheiser, Shure and more!

Specifications

The perfect size to fit most professional studio headphones
Durable molded EVA exterior
Super-soft velvet lining
Interior dimensions: 8.62 x 6.69 x 4.09 inches
Exterior dimensions: 9.65 x 7.48 x 4.33

Notes: The Critter & Guitari Organelle M is an extremely mobile machine. This GLIDE case has been custom molded to fit and protect your Organelle M when you're on the go.

Description:

Made to easily fit into a backpack or suitcase, this case provides real protection. The exterior is rigid, and is topped with waterproof faux leather, while the interior features a soft velvet lining. There's even an interior pocket for storing your cables. With a snug fit, you won't need to worry that your Organelle M could be dislodged during transport.

Specifications:

Perfect fit for your Critter & Guitari Organelle M

Premium faux leather exterior and soft velvet lining

Mesh compartment for holding cables

Interior dimensions: 13.5 x 3.5 x 2.5 inches

Notes: The new PULSE case for the Dreadbox Typhon is just as hard-core as the synth itself! If you're traveling to a rave to generate some massive acid basslines with your Typhon, make sure it's securely protected in this case.

Description:

You won't have to worry about the paint job on your Typhon chipping during your travels with this PULSE case. The custom molded EVA material has been stress tested to prevent any damage from drops and accidental spills, so you can feel confident when taking the Typhon on the road.

The PULSE Case also features a comfortable cloth handle and an interior pocket to store any MIDI or audio cables safely.

Specifications:

Perfect fit for your Dreadbox Typhon with power supply

Versatile and lightweight

Spacious and comfortable handle

High quality Analog Cases logo zipper puller

Interior dimensions: 9.75 x 5.75 x 2.25 inches

Notes: The perfect lightweight travel case for your Analog Rytm or Analog Four MKII. Whether you pack it into a suitcase, or carry it by its comfortable and spacious handle, this case is a user-friendly way to protect your machine on the go.

PULSE cases are made from molded EVA that provides excellent protection. This case is enhanced with extra-thick EVA material, so it's especially rigid and sturdy, and there's an extra layer of foam along the bottom to cushion your machine. The case also includes a nylon mesh compartment for holding your power supply or cables.

Although it's designed specifically for the Rytm, this case also works well for other Elektron machines like the Octatrack, Digitakt, etc, making it a versatile solution for traveling with many different types of hardware gear.

Perfect fit for your Rytm or Analog Four MKII + cables

Ergonomic molded handle

Interior velvet lining with molded EVA foam for additional protection

Extra large premium zipper

Interior dimensions: 16.25 x 9 x 2.75 inches

Notes: The perfect lightweight travel case for your Digitakt or Digitone! Just zip it up and go make music anywhere. Analog Cases' durable PULSE cases are designed for mobile electronic musicians.

Description:

PULSE cases are made from molded EVA that holds its shape and provides excellent protection. This case is designed to hold the Digitakt or Digitone along with its power supply, and it also includes a nylon mesh compartment for holding your cables.

Specifications:

Perfect fit for your Digitakt or Digitone + cables

Versatile and lightweight

Spacious and comfortable handle

High quality Analog Cases logo zipper puller

Interior dimensions: 10.25 x 7.25 x 2.75 inches

Notes: Pulse case for Elektron Digitakt / Syntakt / Digitone

The perfect lightweight travel case for your Digitakt, Syntakt, or Digitone! Just zip it up and go make music anywhere. Our durable PULSE cases are designed for mobile electronic musicians.

PULSE cases are made from moulded EVA that holds its shape and provides excellent protection. This case is designed to hold the Digitakt or Digitone along with its power supply, and it also includes a nylon mesh compartment for holding your cables.

Specifications

Perfect fit for your Digitakt or Digitone + cables
Versatile and lightweight
Spacious and comfortable handle
High quality Analog Cases logo zipper puller
Interior dimensions 10.25 x 7.25 x 2.75 inches

Notes: The Elektron Model Samples/Cycles are perfect for making music on the go. But we all know traveling with gear comes with risks. Unlike soft nylon bags, this PULSE case is made from sturdy molded EVA material that will provide peace of mind for mobile musicians.

Description:

Custom-designed to the exact dimensions of the Model Samples /Model Cycles, it features a rigid exterior, soft, velvet-lined interior, and a nylon mesh pocket for cable storage. You won't have to worry about the safety of your machine when it's in this PULSE case.

Specifications:

Perfect fit for your Model Samples or Model Cycles + cables

Durable and lightweight

Spacious and comfortable handle

Interior mesh pocket

Interior dimensions: 11 x 7.25 x 2.25 inches

Notes: Protect your Octatrack! The Elektron Octatrack is one of the most important and iconic machines for performing live electronic music. If you tour or perform live with your Octatrack, this is just the case for you.

Description:

This PULSE case is custom designed for the Octatrack. It's molded to the exact length of the machine, but we've also included additional space for holding your power cable.

The top lid of the case includes a layer of dense sponge foam, to protect the delicate fader and knobs of your machine. The body of the case is reinforced with extra-thick molded EVA foam, to survive the rigors of the road.

Whether you pack this case inside a suitcase, or carry it using the spacious and comfortable handle, it's the perfect lightweight solution to keep your machine in great shape. As an added bonus, this case can also be used for the Analog Rytm MK1 or Analog Four MKI.

Specifications:

Perfect fit for your Octatrack + power supply

Sponge foam lining in top lid to protect your fader and knobs

Interior velvet lining with molded EVA foam for additional protection

Extra-large premium zipper

Spacious and comfortable handle

Interior dimensions: 14 x 9 x 2.5 Inches

Exterior dimensions: 14.75 x 10.5 x 3.5 Inches

Notes: Keep your ZOIA in great shape with this new GLIDE case. This lightweight and perfectly sized case is ideal for keeping your machine free of scratches for years to come.

Description:

GLIDE cases are made from waterproof faux-leather that provides excellent protection, while looking oh-so-smooth and sleek. The exterior surface is enhanced with a subtle diamond pattern, while the interior is lined with plush fake fur.

This compact case is designed to the exact dimensions of the ZOIA, and packs easily into a backpack along with your other gear.

Specifications:

Custom designed for the Empress Effects ZOIA

Constructed from molded EVA foam and waterproof faux leather

Super-soft velvet lining

Mesh compartment for holding cables

Interior dimensions: 6.5 x 5 x 3 inches

Notes: A portable interface needs a secure and mobile case! The compact GLIDE case features a soft, velvet-lined interior to keep your 2i2 looking new, and you'll have plenty of room to store cables in the mesh compartment built into the lid. The compact GLIDE case is designed to keep the footprint of your 2i2 small and lightweight while protecting your gear.

Description

The GLIDE case for the Focusrite 2i2 is custom molded to fit your interface perfectly without taking away from its portability. The case is made from the durable EVA material designed to protect your interface when you throw it in your backpack or carry it to and from your session.

The interior of the GLIDE case features a mesh pocket for storing any extra cables you might have. The soft, velvet-lined interior will protect the sleek exterior of the 2i2 while keeping the knobs and inputs safe from knocks and debris. Become as portable as you need to be while knowing your Focusrite 2i2 will be looking good as new!

Specifications

Custom molded to the exact dimensions of the Focusrite 2i2
Separate storage pocket for cables
Durable EVA exterior
High-quality, velvet-lined interior
Interior: (7.68 x 4.09 x 2.2) inches
Exterior: (8.19 x 4.92 x 2.68) inches

Notes: The beauty of modern music production is the mobility that small-but-powerful interfaces, like the Focusrite Scarlett 4i4 provide. Being the heart of your creative process, your interface needs to be properly protected when you're on the go.

Description:

With its velvet lining, foam padding, and light-weight EVA construction, this case is specifically designed to keep your Focusrite Scarlett 8i8 looking good and working properly. There's even a pocket for your USB cable. With GLIDE cases, the studio is wherever you are.

Specifications:

Perfect fit for your Focusrite Scarlett 4i4

Durable molded exterior

Super-soft velvet lining

Spacious interior pocket

Interior dimensions: 7.25 x 4.25 x 2.25 inches

Notes: PULSE Case for Korg Drumlogue

Looking for a way to keep your KORG Drumlogue drum machine protected on the go? Look no further than our PULSE case. Specifically designed to fit the Drumlogue and its power supply, this case is the ultimate solution for traveling musicians who want to keep their gear safe.

Crafted with a super soft velvet interior, the PULSE case will protect the wooden side panels and sleek aluminium exterior of your Drumlogue from scratches and other damage. Additionally, a handy mesh pocket is included to store any extra cables or accessories you may need for your performances. Don't risk damaging your gear - keep your Drumlogue safe and sound with the PULSE case.

Description

Inside the case, you'll find a luxurious velvet-like material that will keep your gear safe and snug. On the outside, the case is made from durable EVA that holds its shape, so you can be confident that your equipment is well-protected.

Thanks to the handy moulded rubber handle, transporting this case is a breeze. Plus, its compact size makes it easy to tuck into a larger backpack or suitcase when you're on the move.

Designed to accommodate your Drumlogue and power supply, this case has everything you need to create music on the go. And with a roomy interior pocket, you'll have plenty of space for cables and other essential accessories.

Specifications

Perfect fit for your Drumlogue + cables
Versatile and lightweight
Spacious and comfortable handle
High-quality Analog Cases logo zipper puller
Interior dimensions 14.96 x 7.32 x 3.15 Inches
Exterior dimensions 15.94 x 8.86 x 3.39 Inches

Notes: This PULSE case was designed with one thing in mind: keeping your MicroKorg / MicroKorg XL+ in good condition and working properly. There's no need to settle for a generic gig bag. This is the one you've been waiting for!

Description:

This lightweight and user-friendly case is custom molded to the exact dimensions of the MicroKorg / MicroKorg XL+. Its rigid exterior will provide excellent protection for your synth.

Made with high-quality, durable materials, this case features a velvet-lined interior that will give you peace of mind when traveling with your MicroKorg. And this case also has a spacious interior pocket for storing your cables.

Specifications:

Perfect fit for your Korg MicroKorg / MicroKorg XL+

Separate compartment for holding cables

High-quality, premium handle designed for comfort

Extra-large premium zipper

Interior dimensions: 22 x 9 x 3.75 inches

Exterior dimensions: 23.75 x 11 x 3.75 inches

Notes: ***B-STOCK: Box opened, product in perfect working order***


The PULSE Case for the Korg Minilogue XD Module is the perfect solution for making this compact desktop module even more portable! The PULSE Case has been designed for making transporting the Minilogue XD Module a breeze! The rigid, lightweight EVA material and molded plastic handle will give you the confidence to become even more portable with your desktop synthesizer.

The PULSE Case is made of a durable EVA material and is custom molded to fit the exact specifications of your Minilogue XD. The EVA material is designed to withstand some harsh conditions and will protect your Minilogue XD from any unintentional drops or spills. You'll feel confident as you safely transport your device without it shifting or moving around inside when you're on the move.

The case's interior is lined with high-quality felt material to protect the LCD screens and metal surface from scratches when you're on the move. The lid of the case also features a mesh pocket for storing additional cables or patch notes you might have. The case also includes enough room inside for the wall wart of your Minilogue XD. From studio A to the live environment, the PULSE case is the easiest way to transport and protect your Miniogue XD module.

Specifications

Perfect fit for your Korg Minilogue XD Module
Made from lightweight and durable EVA material
Internal storage pocket for cables
Custom molded interior
High-quality black velvet lining
Exterior: (22.17 x 11.81 x 4.57) Inches

Notes: The PULSE Case for the Korg Minilogue XD Module is the perfect solution for making this compact desktop module even more portable! The PULSE Case has been designed for making transporting the Minilogue XD Module a breeze! The rigid, lightweight EVA material and molded plastic handle will give you the confidence to become even more portable with your desktop synthesizer.

The PULSE Case is made of a durable EVA material and is custom molded to fit the exact specifications of your Minilogue XD. The EVA material is designed to withstand some harsh conditions and will protect your Minilogue XD from any unintentional drops or spills. You'll feel confident as you safely transport your device without it shifting or moving around inside when you're on the move.

The case's interior is lined with high-quality felt material to protect the LCD screens and metal surface from scratches when you're on the move. The lid of the case also features a mesh pocket for storing additional cables or patch notes you might have. The case also includes enough room inside for the wall wart of your Minilogue XD. From studio A to the live environment, the PULSE case is the easiest way to transport and protect your Miniogue XD module.

Specifications

Perfect fit for your Korg Minilogue XD Module
Made from lightweight and durable EVA material
Internal storage pocket for cables
Custom molded interior
High-quality black velvet lining
Exterior: (22.17 x 11.81 x 4.57) Inches

Notes: One of the coolest mini-synths of all time now has the perfect PULSE case! This case is custom designed to the exact dimensions of the Korg Monologue.

Description:

Your battery-powered Monologue is perfect for mobile jamming. Take it anywhere and everywhere with this case! PULSE cases are made from lightweight and durable molded EVA, with shock-resistant padding that protects your synth.

Inside the case, there's a super-soft velvet lining, an extra layer of foam along the bottom to cushion your Monologue, and a spacious mesh pocket for holding your cables. You'll also appreciate the comfortable molded handle, and extra-large premium zipper.

Although it's designed specifically for the Monologue, this case can also fit many other types of mini-synths and hardware devices, making it a great multi-purpose solution.

Specifications:

Perfect fit for your Monologue + cables

Spacious and comfortable handle

Extra-large premium zipper

Super-soft velvet lining

Interior dimensions: 15.25 x 11 x 2.75 inches

Exterior dimensions: 16.25 x 12.75 x 4.25 inches

Notes: The new PULSE Case For The Korg SQ-64 is the ideal solution for protecting your SQ-64. If you're transporting your SQ-64 to a live performance or just performing with friends, you'll feel confident stepping into any environment with the PULSE Case for the SQ-64.

Description

The PULSE Case has been custom-designed to fit form to the exact dimensions of the Korg SQ-64. Made out of a molded EVA material, the PULSE case will protect the knobs, screen, and pads during transport.

The PULSE cases interior is lined with black velvet material to prevent any scratches on the screen of your SQ-64. The PULSE Case also includes a mesh pocket for storing any additional USB or patch cables you might have. If you're throwing your sequencer in your backpack or stepping out into the live environment, the PULSE case is the logical sequence in protecting your SQ-64.

Specifications

Perfect fit for your Korg SQ-64
Made from lightweight and durable EVA material
Internal storage pocket for cables
Custom molded interior
High-quality black velvet lining
Exterior: (15.04 x 5.71 x 1.97) Inches

Notes: Travel in style with the new GLIDE case for the Korg Volca series. GLIDE cases are made from waterproof faux-leather that provides excellent protection, while looking oh-so-smooth and sleek. The exterior surface is enhanced with a subtle diamond pattern, while the interior is lined with plush fake fur.

Description:

With a compact form factor, it's easy to fit this case in a backpack along with your other gear, and you can be confident that your Volca will be completely safe!

(Fits any Korg Volca device: Volca Keys, Beats, Mix, Modular, Drum, Sample, FM, NuBass, Kick)

Specifications:

Premium faux leather exterior and faux fur lining

Mesh compartment for holding cables

Exterior dimensions: 8.5 x 5.5 x 2.25 inches

Interior dimensions: 8 x 5 x 1.7 inches

Notes: Ready to elevate your creative workflow? Give your gear a boost with XTS Desktop Stands: the most durable and versatile stands on the planet!

Featuring a unique extendable design, XTS Stands can be easily resized to adapt to any gear setup. XTS Stands hold up to 25 pounds, offering the ultimate in stability.

Perfect for audio interfaces, MIDI controllers, pedals, synths, and samplers.

Two XTS Stand sizes are available, so you can find the right solution for your studio. The XTS Flex Tray can be added to the Large XTS Stand to use multiple pieces of gear.

The Large XTS Stand will support the MPC Live, Ableton Push, Arturia KeyStep Pro, or even a Eurorack case. 2 sizes of Flex Trays (sold separately) are available for this stand.

XTS Desktop Stand System
Xtendable Stands resize to fit your gear
Sleek and ergonomic design elevates studio organization and workflow
Crafted from 100% solid sheet metal
Infinite versatility with 2 stand sizes available, and optional Flex Tray accessories

Sizes

Large XTS Stand: adjusts to any length 10.5" - 18.25"

Large XTS Stand compatibility includes:

Ableton Push
Akai MPC Live 2 & MPC One
Native Instruments Maschine Plus & MK3
Elektron Analog Rytm
Roland TR-8S
Arturia KeyStep Pro & MiniFreak
Novation Launchpad Pro
Korg Minilogue & MicroKorg
ASM Hydrasynth Desktop & Explorer
Isla Instruments S2400
Sequential Prophet-5 & Prophet-10 Module
Prophet Rev2 Module
Buchla Easel Command
Intellijel 7U Performance Case
MakeNoise 7U 104HP Case, and similar size devices.

Add a XTS Flex Tray to the Large XTS Stand to hold multiple pieces of gear side-by-side:

13.3" Flex Tray fits 2-3 small pedals or synths
17.7" Flex Tray fits an Elektron Digitakt and Digitone, two Strymon pedals, two SP-404s, etc

Dimensions (Large XTS stand)

Width: 8.7"
Height: 5.4"
Length: 10.5"-18.25"

Notes: Introducing the PULSE Case for the Make Noise 0-Coast and 0-CTRL, which can store two Make Noise modules in one very convenient case. Analog Cases have included two cutouts in the case to transport the power supplies below the modules, and the included mesh pocket gives you plenty of space for storing patch cables. Of course, this case can also fit the new Make Noise Strega as well, so your mobile modular performance options are almost limitless!

The PULSE Case for the dual Make Noise instruments is made with durable EVA plastic, the same lightweight material used for football helmets and surfboards. With a PULSE Case, you can toss these synths in your backpack and take it anywhere to jam. Inside the top lid, there's a mesh pocket for storing patch cables, so that you can keep everything for your jam together in one place.

The PULSE Case for the Make Noise 0-Coast and 0-CTRL is molded to the exact dimensions of the semi-modular instruments, so you won't have to worry about the analog components getting damaged when you take your synths on the road.

Specifications

Perfect fit for the Make Noise 0-Coast and 0-CTRL
Made from lightweight and durable EVA material
Internal storage pocket for cables
Custom-molded and die-cut interior
High-quality black velvet lining
Exterior: (15 x 8.82 x 3.31) Inches

Notes: The perfect case for your Make Noise 0-Coast, 0-CTRL, Strega or Moog Werkstatt-01 with CV expander! Just zip it up and go make music anywhere. These lightweight and durable PULSE cases are designed for mobile electronic musicians.

Description:

PULSE cases are made from molded EVA that holds its shape and provides excellent protection. This case is designed to hold the 0-Coast along with its power supply, and it also includes a nylon mesh compartment for holding your cables.

Specifications:

Perfect fit for your 0-Coast, 0-CTRL, or Werkstatt + cables

Versatile and lightweight

Spacious and comfortable handle

High quality Analog Cases logo zipper puller

Interior dimensions: 11 x 6.5 x 1.5 inches

Notes: The Maschine+ is a dream come true. With Native Instrument's latest update to the Maschine family, you can finally leave your laptop at home and make beats literally anywhere. With great power comes great responsibilities, and your responsibilities include making fire beats and keeping your Maschine in working condition!

Description:

Analog Cases have worked tirelessly to create top of the line travel cases, and othe Maschine+ case is no exception. Taking such a powerful piece of studio equipment on the road can be quite scary without a case, and traveling with the original box is not only an eyesore, but it takes away from the portability of the Maschine.

PULSE Cases are custom molded to precisely fit the Native Instruments Maschine+ and Maschine MK3, which keeps the travel footprint extremely small. You can easily throw the PULSE Case for the Maschine in your backpack, or carry it with the comfortable cloth handle. All of Analog Cases' PULSE Cases are made of durable molded EVA material, so no matter where you're making beats, your Maschine will be fully protected.

Specifications:

Perfect fit for your Native Instruments Maschine MK3 or Maschine+

Customized die-cut foam insert that keeps your machine secure

Soft interior velvet lining

Rigid molded exterior that holds its shape and provides excellent protection

Spacious and comfortable handle

Interior dimensions: 12.5 x 11.75 x 2 Inches

Exterior dimensions: 15.75 x 14.25 x 2.5 Inches

Notes: The perfect case for your Novation Circuit! Just zip it up and go make music anywhere. These lightweight and durable PULSE cases are designed for mobile electronic musicians.

Description:

PULSE cases are made from molded EVA that holds its shape and provides excellent protection. This case is designed to hold the Circuit along with its power supply, and it also includes a nylon mesh compartment for holding your cables.

Specifications:

Perfect fit for your Novation Circuit + cables

Versatile and lightweight

Spacious and comfortable handle

High quality Analog Cases logo zipper puller

Interior dimensions: 12.5 x 8 x 2 inches

Exterior dimensions: 13.25 x 9 x 2.25 inches

Notes: The GLIDE Case is custom molded to the exact dimensions of the Novation Circuit Tracks, making it a perfectly secure fit. There is also an interior pocket in the lid that allows you to store extra cables. The GLIDE case is made of a durable and stress-tested EVA material. This will protect the sleek metal exterior, dials, and inputs of your Novation Circuit Tracks

The design of the GLIDE Case allows you to take advantage of the lightweight and portable Circuit Tracks. When you pack the Circuit into your GLIDE case, you'll be able to toss it in your backpack and hit the road!

Specifications

Perfect fit for your Novation Circuit Tracks
Made from lightweight and durable EVA material
Internal storage pocket for cables
Custom molded interior
High-quality black velvet lining
Interior: (10.16 x 8.27 x 1.89??) inches
Exterior: (11.22 x 9.25 x 2.17) Inches

Notes: The Polyend SEQ is a crucial piece of your live electronic music setup. Whether you're on tour, or just jamming with friends, make sure it's protected with the new PULSE case.

Description:

Your Polyend SEQ needs a case that's built to last. PULSE cases are made from durable EVA material and custom designed to the exact dimensions of your machine. The case has an extra inner space for holding your power supply, plus a separate compartment for cables.

With a soft velvet lining, this case will keep the wood panels safe and guard the knobs and screen. This case also has a sturdy, spacious handle and high quality zipper.

Specifications:

Perfect fit for your Polyend Sequencer + cables

Versatile and lightweight

Spacious and comfortable handle

High quality Analog Cases logo zipper puller

Interior dimensions: 25 x 7 x 2 inches

Notes: The PULSE Case For The PreSonus has been designed to make the most out of your portable controller. Featuring a rugged exterior and comfortable handle, you'll be on the move and making the most out of your creative space. The PULSE Case for the PreSonus Atom SQ is ideal for the modern performer and producer!

Description

The PULSE Case has been custom-designed to accommodate the exact dimensions of the PreSonus Atom SQ. Made out of a molded EVA material; the PULSE case will protect the knobs, screen, and pads during transport.

The PULSE cases interior is lined with black velvet material to prevent any scratches on the screen of your Atom SQ. The PULSE Case also includes a mesh pocket for storing any additional USB or patch cables you might have. If you're throwing your controller in your backpack or stepping out into the live environment, the PULSE case is the perfect choice!

Specifications

Perfect fit for your PreSonus Atom SQ
Made from lightweight and durable EVA material
Internal storage pocket for cables
Custom molded interior
High-quality black velvet lining
Interior: (15.2 x 7.17 x 1.73) Inches