Recording Studio Accessories

Notes: The ART SyncGen is a simple to use and inexpensive way to improve the performance of your digital recording equipment while eliminating seemingly random pops and clicks that result from synchronization timing errors in recording systems.

A word-clock generator will centralize all of the timing of various pieces of digital equipment, reducing accumulated timing errors between the individual units that make up a digital recording chain. Designed for maximum versatility, the ART SyncGen will provide stable, sample accurate time based reference and can connect to digital audio equipment with either BNC word-clock or coaxial S/PDIF inputs.

The ART SyncGen also acts as a system tester by confirming status of BNC word-clock cables and terminations and can verify which pieces of gear are internally terminated. The ART SyncGen will also test proper cable connections to ensure total system accuracy.

Notes: When effects are an integral part of your rig, their power adapters and patch cables can often be the most vulnerable part, and the most likely to sabotage your set if they're not pampered. Rather than tossing your pedals, power adapters and all other cabling into a duffel bag after a gig, keep them safe and ready to rock at a moment's notice with the BEHRINGER PB600.

This awesome pedal board makes hooking up six 2.5" x 4.5" pedals as easy as hooking up just one (of course, if you're using pedals that aren't 2.5" x 4.5", the snug foam padding can be cut to accommodate pedals of varying shapes). The PB600 includes 1/4" patch cables, so you can leave your pedals connected to one another, ready to pass signal even when you're transporting them. It also comes with 1 x 6 daisy chain cabling so that when you plug in the 1.7 A power adapter, all your pedals receive power. Meanwhile, all cabling remains safe and free of strain. Failure is almost guaranteed when you're dealing with a rat's nest of loose cabling, but with the PB600, your effects chain is always safe and organized.

Connect your guitar, bass or keyboard to the single 1/4" Input in the upper right corner of the board. A pair of 1/4" From Effects jacks in the upper left corner allow you to connect stereo effects, and two 1/4" Output To Amp jacks send a left and right stereo signal to up to two amps.

When it's time to load out, just unplug the power supply, disconnect your guitar and amp, put the lid back on the PB600 and slide the locking latches back into place. The high-impact plastic casing will protect your pedals from the very worst dings, scrapes and scratches the road throws your way.

Ultra compact and lightweight pedal board for transporting up to 6 effects pedals, including patch cables
Generous 1.7 A power adapter included for powering more than 12 devices includes 1 x 6 daisy chain cabling
Ultra rigid plastic design withstands even heavy impact

*** Effects pedals not included ***

Notes: Specially designed for music products and accessories, the CB-BU10 provides a protective, well-organized home for your gear while traveling around town and beyond. This quality backpack-style bag is ideal for carrying a BOSS multi-effects processor or Loop Station plus cables, pedals, footswitches, and other essentials. Along with a main compartment, there's a slim pocket for a laptop or tablet and over ten additional areas to manage and secure your stuff. Lightweight and extremely rugged, the CB-BU10 is the ultimate utility gig bag for modern musicians.

Your everything bag

Every element of the CB-BU10 was conceived with the working musician in mind. The large main compartment and slim pocket are lined with soft velvet material to protect your valuable gear, while the padded sides and bottom feature internal panels to shield from impacts. Numerous accessory areas provide all sorts of places to stow various items, and the internal zipper pulls are fabric-covered to eliminate surface scratches. When you're ready to move, the padded handle, straps, and mesh back offer maximum comfort for carrying over long distances.

Quality protection

The CB-BU10 is built to last with top-quality materials and construction throughout. The high-grade 1680D polyester exterior is rugged and protective, and the robust handle and straps are fully integrated for a premium carrying experience. Two long rubber feet on the bottom provide extra impact protection and stability when standing the bag on end. And since everyone likes to travel as light as possible, we've minimized weight while maintaining great protection and durability.

For gigging guitar and bass players

The CB-BU10 is perfect for carrying the current BOSS range of streamlined processors, including the GT-1000, GX-100, ME-80, and others. And there's still plenty of room left over for FS-series footswitches and EV-series expression pedals, as well as a tuner, cables, and other items.

For looping musicians

If you perform with one of the latest BOSS Loop Stations, the CB-BU10 is a must-have item. The large compartment can fit the RC-505mkII or RC-600, and the versatile pocket system provides lots of spaces to secure microphones, cables, external footswitches, headphones, a laptop, and more.

Specifications

Main Material: Polyester
Polypropylene tape

Size & weight

Dimensions (excluding protruding parts)

333 x 234 x 538 mm
13-1/8 x 9-1/4 x 21-3/16 inches

Weight: 1.6 kg/3 lbs 9 oz

Notes: Comes partially assembled with simple instructions.

Notes: Comes partially assembled with simple instructions.

Notes: The model 230 double support is designed to house two large pieces of equipment, with the ability to improve the operating position of both.

In each position of the bracket, a 30cm piece of equipment can be placed. deep, such as Maschine MK3 and Maschine Jam.

This double support in turn allows it to be used as two simple supports. Simply unscrew the front half from the back.

At the same time, it saves a lot of space on the surface, ideal for optimizing the space in our studios.

The width is adjustable according to the length of the rods that join both halves.

The support includes rubber feet so that it does not scratch or slip and the screws for its assembly.

Notes: This stand was specially designed to mount two Elektron MK2 synthesizers (Analog Four and Analog Rytm).

It also allows you to combine other equipment of similar dimensions.

Each side is made up of two pieces that are firmly held together by a screw.

The versatility of the design allows it to be used as a double support or as two simple supports, separating the front from the back.

Its shape is designed so that it does not interfere with the rear connectors of the equipment.

The overall dimensions of the armed support are:

Width: 32cm.
Height: 23cm.
Depth: 41cm.

Includes rubber feet, screws and rods for assembly.

Notes: This stand was specially designed to mount one Digi and one Elektron MK2 synthesizers (Analog Four and Analog Rytm).

It also allows you to combine other equipment of similar dimensions.

Each side is made up of two pieces that are firmly held together by a screw.

The versatility of the design allows it to be used as a double support or as two simple supports, separating the front from the back.

Its shape is designed so that it does not interfere with the rear connectors of the equipment.

Notes: This stand its part of a new concept in COVERUP. With differents parts, you can use to put on multiple synths, including big devices, until now, not possible with the other stands.

You can configure your setup with you like more, with two big devices, or three medium devices. Easy to ensamble, very light to move from your studio to live. Just you need 1 minute to arm and start to playing.

Your setup of synthesizers and studio equipment can change permanently and with it also the position on the work table.

Taking this into account, CoverUp developed a 3-level support, which can be set up in different ways depending on the number of machines that we are going to place and their size.

In the triple stand configuration (using all 4 parts), 3 20cm machines can be placed. deep and a maximum height of 7cm.

This space is enough for much of the hardware available today.

The triple bracket parts are assembled with screws (included) using a universal socket that holds them together firmly.

In turn each part can be used as a simple support. It is only enough to separate the parts by removing the screws and use each part as it suits us.

Each part has rubber feet underneath, so that the support does not slip and is firmly supported.

Both halves of the triple support are linked with wooden rods at various points to give it lateral stability.

The design contemplates space for the rear connectors of each equipment, so that none of them are obstructed by the support.

Measures:
Depth: 58cm
Height: 41cm
Width: 34cm

Notes: The dbx CT3 is an advanced cable testing unit allowing you to evaluate a large variety of cables with ease. The CT3 offers many common connectors such as RJ45, RJ11, MIDI, Speaker Twist, XLR, RCA Phono, BNC, DIN, TRS, TS, DMX, & Banana. It can be split into 2 parts, a SENDER and RECEIVER so preinstalled and long cables can be tested.

Recommended for: Studio, Tour, Portable.

Notes: So you love editing in Pro Tools, but lets face it, if you could save tons of extra time on each recording session and get the same results, wouldn't that be great?

- Faster editing means an easier and more productive day-to-day experience for you.
- The worlds most used shortcut keyboards.
- Professional studio look. Impress clients and improve work flow.
- Mac and PC Compatible. (USB port required.)
- 1 year warranty included.
- The Editors Keys Apple Dedicated Pro Tools Keyboard is compatible with all versions of Avid Pro Tools including Pro Tools 11 and is fully compatible with both Mac's and PC's with a USB Port.

Whats the difference between this and the Editors Keys own brand?

Well if you're a Mac user, you may prefer to keep the 'Apple' look, by using one of our official Apple Keyboard with the keyboards moulded on top.

Your new Pro Tools keyboard gives you lightning fast access to all of the main program tools, saving you the hassle of manuals, menus and tool-bars. So whilst saving time and money, you'll also impress your clients by transforming your standard room into a professional studio. Each key also contains the shortcut text as well as your keyboards standard letter for easy typing.

When your at your studio set up and working on your latest track, did you know, around 30% of your time is spent clicking through the Pro Tools menus and tool bars?

Notes: 5 LCD keys poised to trigger unlimited actions. One-touch tactile operation lets you control apps, launch social posts, adjust audio, mute your mic, turn on lights and so much more, while visual feedback confirms your every command.

Streamline everything

Your setup is your world. From broadcasting and editing to designing, developing, networking - everything - you need one interface to control your myriad apps and tools. You need Stream Deck.

Take control

15 LCD keys poised to trigger unlimited actions. One-touch tactile operation lets you control apps, launch social posts, adjust audio, mute your mic, turn on lights and so much more, while visual feedback confirms your every command.
Integrate your system

Plugins get your apps up and running with Stream Deck in no time. Elgato 4K Capture Utility, Wave Link, Control Center. OBS, Twitch, Twitter, XSplit, YouTube, Spotify. iCue, Philips Hue, LIFX, IFTTT. Zoom, PowerPoint, Keynote, Apple Mail, and loads more. Find them all in the Stream Deck Store, and get new plugins on the regular.

Make it yours

Stream Deck MK.2 features a removable faceplate that you can switch out and modify with ease. Choose from a growing range of epic designs, or slap on some paint and decals to create your own. Change faces whenever the mood strikes and completely personalize your Stream Deck MK.2 with custom icons and screensavers.

Create with ease

Trigger sound effects and audio clips. Launch GIFs and onscreen videos. Activate your lower thirds, intermission screen, and signature outro graphics. Stream Deck integrates your tools and detects your scenes, media, and audio sources, so you can cruise through your workflow and focus on your audience.
Hack your workflow

Forget keyboard shortcuts. Hotkey Actions let you cram macros into keys for instant identification and deployment without error. Launch apps and websites, open folders and access pre-composed texts. Streamline your film editing, music production or photography workflow. Your options are endless.

Trigger automations

Sit back, tap a key, and smile as your Ring Light turns on, your intro scene goes live, and your welcome message posts to chat. Smash another key to activate flight mode, launch Spotify, and open your favorite creativity app. With Multi Actions, any number of actions can be stringed together, assigned to one key, and triggered intermittently or all at once.

Customise your setup

Simply drag actions onto keys and add icons. Need more actions? Turn keys into folders to store as many actions as you need. You can also save unique key layouts as profiles for instant access to task-specific actions. Even better, set Stream Deck to switch profiles automatically as you jump between apps.

Technical specifications

Dimensions: 118 x 84 x 25 mm / 4.6 x 3.3 x 1.0 in. (without stand)
Weight: 145 g without stand / 270 g with stand
KEYS
Keys: 15 customizable LCD keys
Interface: USB 2.0

In the box

Stream Deck, Desktop Stand, USB-C to USB-A Cable, Quick Start Guide

System requirements

Windows
OS
Windows 10 (64-bit)

Mac
OS
macOS 10.13 or newer

Notes: A new and improved design with additional space and comfort for longer journeys!

This messenger bag is a must-have accessory for our larger standalone units - the PERKONS and SYNTRX.

Featuring an easy-access main compartment with a locking strap for securing your synth in place, spacious side pockets, and a separate zipped compartment, there's plenty of room for all of your cables and accessories!

Dimensions: 14 x 45 x 31 cm

Notes: Large format digital mixer carry bag designed to fit Behringer X32 Compact and similar size consoles.

These bags are perfect for local sound hire companies, churches and schools using large digital mixers.

Size: 26" X 21" X 8.5"

Notes: MP3 player and microphone line mixer:
With this unit combination, it is possible to mix 3 audio signal sources. The integrated MP3 player can be switched between SD card and USB port.

Notes: Attention: The sensor does only work with the SOMI-1 receiver hub or the 2.4SINK Eurorack module.

Additional motion sensor for SOMI-1 and 2.4SINK.

Comes with wristband.

7 different 3D movement parameters per sensor
9-DOF state-of-the-art sensor fusion
Up to 6 sensors simultaneously
Wireless via Bluetoothr 5
Low latency under 10ms (no perceivable delay)
High Precision (ca. 0.01 degrees)
Range up to 50 meters (164 feet)
Up to 20 hours battery lifetime

Notes: Turn your smartphone into a professional filmmaking rig with the RODE Phone Cage. This magnetic mobile filmmaking cage features an ultra-secure mounting system for attaching a MagSafer iPhoner or other smartphone with a magnetic case. Five cold shoe mounts allow for easy mounting of a wide range of accessories, including microphones and lights, with in-built cable management ensuring your rig stays neat and tidy. Conveniently placed 14-inch and 3/8-inch threads facilitate connecting even more accessories, including handles and tripods, allowing you to customise it to your needs. The Phone Cage is made from lightweight aluminium and is incredibly rugged, perfect for outdoor use and run-and-gun filmmaking.

Magnetic mobile filmmaking cage
MagSafer compatible
In-built cable management slots
Five cold shoe mounts for attaching microphones and lights
14-inch and 3/8-inch threads for use with tripods, handles and other accessories
Facilitates portrait and landscape shooting

Mechanical specifications

Mounting Options:
Cold Shoe Mounts: 5
Standard 1/4-inch Thread: 14
ARRI 1/4-inch Thread: 17
3/8-inch Threads: 2

Weight (grams): 285
Dimensions (millimetres):
Length: 245
Width: 35.5
Height: 126

What's in the box

1 x Phone Cage
1 x Magnetic Phone Mount
1 x Locking Screw

Notes: TC Electronic G-Card with 245 Custom Artist Presets - compatible with G-Force effects unit

Notes: UDG have further fined-tuned what was already a great design concept of a flight case into one specially for the most discerning creative performers. Constructed from aluminium thus providing an extremely stable structure with lighter weight compared to traditional flight cases. The inner sides are protected with pick & pluck foam, which allowing user to create individualized adapted compartments. The pick & pluck foam allow you to pluck out any desired shape you require for Ableton Push 3 and creating another slot beside for cable storage. This pick & pluck foam creating an easy, do-it-yourself customized system of case interiors.

The UDG Ultimate Pick Foam Flight Case Ableton Push 3 is designed to keep your Ableton Push 3 protected from accidental damage when you transport it to and from gigs. They're compact and lightweight yet tough enough to keep your gear safe.

Specifications

Colour: Black
Weight: 5,50 kg / 12.1 lbs
Outer Dimensions (W x H x D): 39.0 x 50.0 x 16.5 cm | 15.3 x 19.7 x 6.5 inch
Inner Dimensions (W x H x D): 38.0 x 49.0 x 15.5 cm | 14.9 x 19.3 x 6.1 inch
Material: Aluminium

Protection: Corrosion resistant aluminium profiles with strong rounded corners
Fully-lined with high density foam protective padding & egg-crate foam on lid
Two side strong butterfly lock
Rubber feet at the bottom for support in standing

Extras

Lighter weight than traditional flight cases
Black Diamond finishing surface
Ergonomic & sturdy carry handle
Pick & pluck foam with two separate layers

Fits

Ableton Push 3, power adapter, extra cables

Notes: ***B-STOCK: Box opened, product in perfect working order***


UDG have further fined-tuned what was already a great design concept of a flight case into one specially for the most discerning creative performers. Constructed from aluminium thus providing an extremely stable structure with lighter weight compared to traditional flight cases. The inner sides are protected with pick & pluck foam, which allowing user to create individualized adapted compartments. The pick & pluck foam allow you to pluck out any desired shape you require for Ableton Push 3 and creating another slot beside for cable storage. This pick & pluck foam creating an easy, do-it-yourself customized system of case interiors.

The UDG Ultimate Pick Foam Flight Case Ableton Push 3 is designed to keep your Ableton Push 3 protected from accidental damage when you transport it to and from gigs. They're compact and lightweight yet tough enough to keep your gear safe.

Specifications

Colour: Black
Weight: 5,50 kg / 12.1 lbs
Outer Dimensions (W x H x D): 39.0 x 50.0 x 16.5 cm | 15.3 x 19.7 x 6.5 inch
Inner Dimensions (W x H x D): 38.0 x 49.0 x 15.5 cm | 14.9 x 19.3 x 6.1 inch
Material: Aluminium

Protection: Corrosion resistant aluminium profiles with strong rounded corners
Fully-lined with high density foam protective padding & egg-crate foam on lid
Two side strong butterfly lock
Rubber feet at the bottom for support in standing

Extras

Lighter weight than traditional flight cases
Black Diamond finishing surface
Ergonomic & sturdy carry handle
Pick & pluck foam with two separate layers

Fits

Ableton Push 3, power adapter, extra cables