安全购物

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

安全购物

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Synth accessories

View:
Options
Items 1 to 28 of 28 on page 1 of 1
Cat: 670993 Rel: 21 Dec 17
 
Push-button control for the Bastl Bit Ranger
Notes: The Synapsis is a 4x4 pushbutton matrix that offers performative control of the Bit Ranger.

There are 8 patch points connected to 4 rows (ABCD) and 4 columns (1234) of buttons. Pressing button A1 connects point A to point 1. A2 connects A to 2. B2 connects B to 2 and so on.

Package includes:

- The Synapsis
- 10 short + 10 long jumper wires
- Hex key

Using the Synapsis:

It is best used by dedicating rows to outputs (like divider or mix bits) and columns to inputs (like the byte section or inhibit points). In this configuration every possible combination of buttons will connect outputs to inputs and cause a change in the behaviour of the BitRanger. As always it is best to experiment and try new things.

Installing the Synapsis:

- Remove the screws from the bottom of the bit ranger and then remove the bottom plate.
- Remove the small section of plastic from the front edge of the face plate and place it somewhere safe. In newer models there is a slot in the middle of the bottom opening where the mini plate can be placed for storage.
- Screw the bottom plate back onto the BitRanger.
- Slide the Synapsis into the opening in the front.
- Place screws through the holes in the front of the bottom plate to secure Synapsis in place.

That's it!
Read more
 2 in stock $32.62
Cat: 673903 Rel: 12 Jan 18
 
Intellijel case adapter
Notes: This adapter allows you to use the rear audio jacks on Intellijel 7U cases with up to two Pedal I/O 1U interfaces. It eliminates the need for the Pedal I/O JACKS 1U module.
Read more
 2 in stock $13.26
Korg PS3 Footpedal (pedal switch)
Cat: 460432 Rel: 06 Jul 12
 
Pedal switch
Notes: This low-cost pedal can be used for sustain when connected to the damper input of Korg keyboards. It can also be used for the assignable footswitch jack on Korg products, where it will provide various functions depending on the product's settings. The PS3 features a tough, molded plastic body with a non-slip rubber base.

This reliable momentary footswitch can be used as an accessory with many Korg products to add extra functionality.
Read more
 2 in stock $13.29
M Audio EXP Expression Pedal (controller pedal)
Cat: 465958 Rel: 16 Feb 13
 
Universal expression controller pedal
Notes: Feel the need to express yourself fully? M-Audio's EX-P expression controller pedal works with all M-Audio MIDI controllers that have an expression pedal input. A built-in polarity switch insures compatibility with most other brands of controllers and keyboards. Use the EX-P to control any assignable variable MIDI controller value including volume, modulation, panning, filter sweep and more. Durable molded construction with integral cable.
Read more
 4 in stock $15.90
Moog Minitaur Rack Mount Kit (synthesizer accessory)
Cat: 484836 Rel: 16 Apr 13
 
Rack mount kit for enabling you to mount your Minitaur flat or at an angle
Notes: Moog's Minitaur Rackmount Kit is pretty much essential if you're gigging with your Minitaur. In the studio, you can tidy up and enhance your productivity by getting your synth off the desktop and into your rack. The Minitaur Rackmount Kit gives you the options of positioning your Minitaur either flat or angled, so your ergonomics will always be ideal. When you're playing out, the Minitaur Rackmount Kit lets you easily mount your Minitaur in a rack case, affording it protection from the rigors of the road.
Read more
 2 in stock $51.97
Moog Minitaur Wooden Casing Panels (synthesizer accessory)
Cat: 522120 Rel: 12 Feb 14
 
Wood case panels for use with the Moog Minitaur synth
Notes: Constructed of ash with a wood-burned Moog icon on the left panel; the Minitaur Wood Kit houses your new Moog synth in style. It comes with easy-to-install front and side panels.

The dual end-pieces are easy to install and make your Minitaur feel right at home next to your Voyager, Taurus 3, Moogerfoogers and more.
Read more
 1 in stock $77.44
Cat: 590215 Rel: 02 Feb 16
 
Three tier rack stand specifically designed for Moog Mother-32
Notes: Mount 3 Mother-32 synthesizers together vertically for maximum modularity and synthesis capabilities. Also accommodates 60HP Moog Eurorack cases.

*Mother-32 units not included*
Read more
 2 in stock $73.23
Cat: 552825 Rel: 04 Nov 14
 
Desktop synthesiser side panels - Cherry Wood
Notes: Cherry Wood Sides for Desktop Cases
Read more
 1 in stock $55.17
Cat: 626262 Rel: 02 Jun 17
 
Pair of high-quality replacement side panels for System 8 - brushed aluminium
Notes: Change the look of your SYSTEM-8 with these high-quality replacement side panels made of brushed aluminum. Sold as a pair.
Read more
 1 in stock $43.50
Soulsby Oscitron Accessories Pack (synth module accessory pack)
Cat: 647918 Rel: 14 Sep 17
 
Accessories pack for the Oscitron module featuring 2 overlays, cable & instructions
Notes: The Soulsby Oscitron Accessories Pack allows 2 new software versions to be uploaded to the Oscitron module and consists of:

2 overlays made from high quality reverse laser printed vinyl:
- Odytron (analogue modelling dual oscillator with filter, sync, PWM and 2 modulation inputs)
- Oscidrum (8 part drum machine and 16 step sequencer with numerous tweakable parameters)

Quick reference / instruction card:
- Contains quick ref for Odytron functions and an overview of inputs and outputs of Odytron and Oscidrum.

Programmer cable:
- Allows alternative software versions to be uploaded to the Oscitron. These can be downloaded from the Soulsby Synths website.

Oscidrum:

- 8 instrument drum machine
- 16 step sequencer
- 8 user patterns
- Engine sample rate control
- Instrument volume, delay FX, pitch and length
- Currently 4 drum banks available

Odytron:

- Dual analogue modelling 8-bit oscillator
- 2 filter types and bypass
- 2 modulation inputs
- Ring mod
- Wave sync
- PWM
- 8 user patches
Read more
 2 in stock $22.01
Cat: 672209 Rel: 30 Nov 17
 
Oak veneered Roland Boutique custom made stand/end cheeks for the JX03, JP08, JU06, SE02, TR09, TB03, TR08 etc
Notes: This new version holds 3 Roland Boutique synths. This will also fit the TR09, TR08, SE02. SH01a and TB03 etc (you will need to remove them from the additional case that they come with).

The stand has been made from oak veneered MDF wood and is connected via 12x allen head Confirmat screws (key and screws provided) into an MDF wooden bar. These are a great addition to the Boutique synths and give a much nicer look and better working angle.

The Boutique synths are gripped in place by the sides of the stand, so do not fully tighten screws until units are placed inside. Make sure you do this on a flat surface to ensure the feet are correctly aligned.

The stand will need assembly as they will be sent flat packed - all screws, tools and rubber feet are provided.
Read more
 5 in stock $51.98
Cat: 672217 Rel: 30 Nov 17
 
Custom made oak veneered Korg Volca triple stand/end cheeks
Notes: This version holds 3 Korg Volcas. The stand is made from oak veneered MDF and is connected via 12x allen head Confirmat screws (key and screws provided). These are a great addition to the Volcas and give a much nicer look and working angle. You can also flip them round to have a much steeper angle if you prefer. They can also be painted with ease or stained with wood stain to suit your studio.

The Volca fits snuggly into the stand so do not fully tighten screws until it's placed inside, then tighten screws to hold in place firmly. Make sure you do this on a flat surface to ensure the feet are correctly aligned.

The stands need assembly as they will be sent flat packed. All screws and tools are provided - this includes small rubber feet.
Read more
 3 in stock $42.43
Cat: 674333 Rel: 15 Jan 18
 
Oak veneered dual synthesiser stand
Notes: Waldorf Blofeld and Pulse 2 oak veneered stand. This new version has been precision machined to ensure a quality fit and finish. Holding 2 Waldorf synths, the stand not only gives a much better working angle but also helps free up much needed space in your studio. The design leaves plenty of room for all cables to be easily attached or removed.

The synths fit snuggly into the recesses on the stand and is then secured using the supplied confirmat screws. Allen key and rubber feet also included.
Read more
 2 in stock $53.04
Cat: 672216 Rel: 30 Nov 17
 
Custom made Korg Volca stand/end cheeks
Notes: This version holds 2 Korg Volcas, which is ideal if you have the full range of Volcas as 2 stands can be put side by side to create a rack of four. The stand has been made from solid oak wood and is connected via 8x allen head Confirmat screws (key and screws provided) into an MDF wood bar. These are a great addition to the Volcas and give a much nicer look and working angle. You can also flip them round to have a much steeper angle if you prefer.

The stand will need assembly as it will be sent flat packed - all screws are provided.

Due to the nature of the material when assembling the stand the braces may split - this is perfectly normal and the stand will function as it should.
Read more
 4 in stock $46.68
Cat: 674332 Rel: 15 Jan 18
 
Pair of solid oak end cheeks for the Access Virus TI
Notes: Made from high quality oak, adding a touch of retro style to your synth. Each pair of cheeks is hand made and nicely angled to make the synth much more useable on your desktop. The end cheeks screw in using your original screws in the same place as the rack mounts or normal end cheeks.
Read more
 2 in stock $39.24
Cat: 672200 Rel: 30 Nov 17
 
Korg Microkorg oak end cheeks
Notes: These end cheeks are a direct replacement for the plastic end cheeks on the Korg Microkorg Synthesizer. They have been made from solid oak wood and are fixed using existing screws. The Wood has been oiled and should stay looking beautiful for a long time. These are a great addition to the Korg synth and add a touch of retro style.
Read more
 1 in stock $38.18
Cat: 674329 Rel: 15 Jan 18
 
Pair of custom made Roland Boutique end cheeks
Notes: These side panels are a direct replacement for the metal end cheeks on the K25M Keyboard, and a great addition to the Roland Boutique range of synths, giving a much more expensive look and feel. They have been made from solid oak wood and are fixed using existing screws. The wood has been oiled and should stay looking beautiful for a long time.
Read more
 1 in stock $39.24
Cat: 674331 Rel: 15 Jan 18
 
Pair of custom built/hand made solid oak side panels
Notes: Hand made solid oak end cheeks for the Roland System 1M. Made from solid European oak, adding a touch of retro style to your synth. Each stand is ideally angled to make the System 1M much more useable on your desktop. Fitted using the original screws from your synth.
Read more
 2 in stock $38.18
Cat: 672207 Rel: 30 Nov 17
 
Solid oak stand for 2 x Roland Boutiques
Notes: This new MK2 version holds 2 Boutique synths. The stand has been made from solid oak wood and is connected via 8x allen head Confirmat screws (key & screws provided) into an MDF wood bar. These are a great addition to the Roland range of synths and give a much nicer look and working angle and now there is more space for cables.

The stand will need assembly as they will be sent flat packed, all screws are provided. The Boutiques fits snuggly into the stand so do not fully tighten screws until the synths are placed inside, then tighten screws to hold in place firmly. Make sure you do this on a flat surface to ensure the feet are correctly aligned.

Due to the nature of the material if you overtighten braces may split - this is perfectly normal and the stand will function as it should.
Read more
 1 in stock $51.98
Cat: 674328 Rel: 15 Jan 18
 
Pair of custom made side panels for the Korg SQ1
Notes: Custom made solid European oak stand/end cheeks for the KORG SQ1 sequencer. These are a great addition to the SQ1 and offer a nice look and working angle. The sequencer fits snuggly into the stand and is held in place via the sides, connected via 4x confirmat allen head screws into an MDF wood bar (key & screws provided).
Read more
 1 in stock $38.18
Cat: 674334 Rel: 15 Jan 18
 
Pair of custom made Moog Werkstatt end cheeks
Notes: Custom made stand/end cheeks for the Moog Wekstatt 01 analogue synth. This stand allows you to have your Moog at a much more usable angle. The end cheeks have been made from solid oak wood and are connected via 4x confirmat allen head screws into an MDF bar (screws and key provided).

These are a great addition to the Moog and give a much more expensive look and feel - the oak has been oiled and should stay looking beautiful for a long time.
Read more
 2 in stock $38.18
Cat: 672211 Rel: 30 Nov 17
 
Roland Aira TR8 drum machine custom end panels
Notes: Custom built solid oak end cheeks for your drum machine.

This stand has been hand crafted from solid oak to give your drum machine a much nicer working angle.

The stand is assembled by connecting the side panels with 4x confirmat screws. Comes with fixings and an allen key to assemble your stand ready for use.

Item will need assembly as they are sent flat packed, all screws and tools are provided, this includes small rubber feet.
Read more
 2 in stock $46.68
Cat: 672206 Rel: 30 Nov 17
 
Solid oak Roland Boutique stand
Notes: These end cheeks have been made from solid oak wood and are connected via 4x confirmat allen head screws (key provided) into an MDF bar. The Oak has been oiled and should stay looking beautiful for a long time. These are a great addition to the Roland Boutique range of synths and give a much more expensive look and feel.

The stand will need assembly as they will be sent flat packed, all screws are provided. The Boutique fits snuggly into the stand so do not fully tighten screws until synth is placed inside, then tighten screws to hold in place firmly.

Due to the nature of the material when assembling the stand the braces may split - this is perfectly normal and the stand will function as it should.
Read more
 2 in stock $47.73
Cat: 672214 Rel: 30 Nov 17
 
Solid oak Waldorf Pulse 2 & Blofeld stand
Notes: This stand has been made from solid oak wood and is connected via 4x allen head Confirmat screws (key & screws provided) into an MDF wood bar. These are a great addition to the Waldorfs and give a much nicer look and working angle.

The Waldorf Synths fit snuggly into the stand so do not fully tighten screws else you may split the MDF bar. Make sure to assemble on a flat surface to ensure the feet are correctly alligned.

Flat packed - all screws and tools are provided.
Read more
 1 in stock $38.19
Cat: 672202 Rel: 30 Nov 17
 
Waldorf Rocket, Streichfett or 2 Pole Filter stand - solid oak
Notes: This stand allows you to have your Waldorf at 2 different angles depending on your taste. The end cheeks have been made from solid oak wood and are connected via 4x confirmat allen head screws (key provided) into an MDF bar. The Oak has been oiled and should stay looking beautiful for a long time. These are a great addition to the Waldorf Range and give a much more expensive look and feel.

The stand will need assembly as they will be sent flat packed, all screws are provided. Insert screws and tighten with the allen key - as soon as you feel the screw begin to tighten or get all the way in then only use gentle force to finish the process. The Waldorf fits snuggly into the stand - so don't fully tighten screws until the Waldorf is placed inside, then tighten screws to hold in place firmly.
Read more
 2 in stock $38.18
Cat: 474696 Rel: 24 Nov 12
 
3.5mm radio antenna for the OP-1
Notes: This is a 3.5mm plug-in radio antenna for the Teenage Engineering OP-1 Synth which turns the OP-1 into a radio.

http://www.youtube.com/watch?feature=player_embedded&v=to3bjSnLZZM
Read more
 1 in stock $21.56
Cat: 588502 Rel: 30 Sep 15
 
Pack of 3 Pocket Operator screen protectors
Notes: Display screen protectors for Teenage Engineering Pocket Operator range, pack of 3.
Read more
 1 in stock $14.06
Cat: 572891 Rel: 22 Jun 15
 
Optional wooden side panels for Vermona Mono/Kick/Filter Lancet synthesiser
Notes: Quality wooden sides for Vermona Mono/Kick/Filter Lancet. Looks great on your desktop.

Note: Vermona units sold seperately
Read more
 2 in stock $25.45
Items 1 to 28 of 28 on page 1 of 1

Filter

Synth accessories
商品
Release Date
Featured
Monthly payment
Number of monthly payments
Cash price
Deposit to pay
Loan amount
Loan repayment
Cost of loan
Total amount payable

Only available to UK residents over 18, subject to terms and conditions. More info here.

These rates of finance are based on this specific product and can be applied for once this item has been added to the cart. Adding other products to your cart may change the rate of finance or deposit required.

Checkout and apply for finance now
Close