安全购物

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

安全购物

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Synth modules

首页  Equipment  

Synth modules

Options
Items 1 to 12 of 12 on page 1 of 1
Subscribe to our weekly Studio Equipment emails
Serge Modular Variable Slope VCF Module
Cat: 793037 Rel: 15 Oct 20
 
VCF module
Notes: The Serge Extended Variable Slope filter (VCFS) is a unique filter of the Serge system, covering a wide range of sonic character. According to the 1983 Serge catalogue, the VARIABLE SLOPE VCF (VCFS) allows the amount of filtering to be dynamically controlled, from barely perceptible filtering to highly resonant, sharp cut-offs. With the variable slope control in the center position, the VCFS acts as a typical flat-response VCF, with high, low, and band~pass outputs available simultaneously. The slope of the cut-off is 12 db/octave. As the control is moved toward the maximum position, the resonance of the filter increases, so that the cut-off becomes sharper.



Read more
MRP:$366.56 SAVE 17%
 1 in stock $305.46
Click for better price!
or call +44 20 7424 1960
quote 793037
Serge Modular Smooth & Stepped Generator Module
Cat: 757124 Rel: 15 Oct 20
 
Multi-functional generator module
Notes: The Serge Smooth & Stepped Generator (SSG) is a complex multi-functional module which can be patch programmed to provide various slew and sample functions both for audio and CV signals. It is one of the essential Serge modules.

The Smooth section will place a positive and negative slew on input voltage transitions for lag effects, voltage controlled portamento and for low frequency filter applications. In Cycle-mode (cycle jack patched to the input), the Smooth side will oscillate yielding a voltage controlled triangle wave LFO. A high level into the HOLD input will enable the Smooth Function to be used as a track-and-hold circuit with voltage controlled slew rate.

The Stepped function can be used as a sample-and-hold with voltage controlled slew rate limiting. In Cycle mode, a pulse applied to the Sample input will generate complex staircase waveforms for control voltage applications and for use as audio signals.

The Coupler is an internal comparator which compares the output levels of the Smooth and the Stepped Generators. This output is useful for generating complex control voltages or random voltages.

The Random*Source version of the Smooth & Stepped Generator for Euro is a licensed and authorized adaption of the original Serge design that provides an increased audio range of the Smooth Generator and a bipolar ("hot") Coupler output in addition to the regular (unipolar) Coupler output.
Read more
MRP:$387.44 SAVE 17%
 1 in stock $322.85
Click for better price!
or call +44 20 7424 1960
quote 757124
Serge Modular Stereo Mixer Muses Edition Module
Cat: 757122 Rel: 15 Oct 20
 
Stereo mixer module
Notes: The Stereo-Mixer is a 2 input, 2 output equal-power panning mixer designed combine the sound of the famous Serge VCAs with the most audiophile parts available today in a special edition for Eurorack - NJR Muses op-amps and THAT2180 VCA chips. The module has 2 independent input channels (with attenuators) that can be Stereo panned between the 2 outputs. Each channel's gain is controlled by a gain knob and as Gain CV input (with attenuator) which allows to go into massive overdrive with a very organic sound. There are also two AUX inputs that allow signals to be routed in at unity gain. Both panning and Gain CV inputs have been designed to handle audio rates, making the Stereo Mixer a very powerful waveshaping and droning tool.

Beware that the module is able to deliver massive gain, resulting in output levels of up to appr. +/-11V when overdriven, so make sure your other equipment (AD converters, mixers) can handle this

Balanced Outputs, using "a new generation of monolithic audio differential line drivers offering improved performance over conventional crosscoupled designs" for low noise and distortion. These outputs can be connected to balanced or unbalanced equipment (amplifiers, A/D converters...)

NJR Muses op-amps in the audio path.

Optimized value set and easier calibration / setup.

Two Aux inputs can also be used to chain mixers. The output is available at a pair of banana jacks as well as (6.35mm / 1/4") TRS jacks (phone connectors) for connecting to external amplifiers, ADCs etc.
Read more
MRP:$507.45 SAVE 17%
 1 in stock $422.87
Click for better price!
or call +44 20 7424 1960
quote 757122
Frequency Central Logic Bomb Dual CV Addressable Boolean Logic Module
Cat: 795615 Rel: 16 Oct 20
 
Boolean logic/utility synth module
Notes: Logic Bomb is a Boolean logic module with two independent but identical sections.

Both sections feature addressable Boolean logic, with a choice of any one of:

NOT A

NOT B

AND

NAND

OR

NOR

XOR

XNOR

Logic gate type may be chosen either via knob or via CV input.

When addressed via CV, the knobs become attenuators. CV range is 0V to 5V.
Read more
MRP:$187.85 SAVE 23%
 1 in stock $144.58
Click for better price!
or call +44 20 7424 1960
quote 795615
Serge Modular 8-Stage Sequencer & Programmer Module
Cat: 757144 Rel: 16 Oct 20
 
Sequencer & programmer module
Notes: The SEQ XL is a modern incarnation of Serge's analog sequencer / programmer. 8 stages. 2 rows of CV output. A - B (A minus B) outouts the difference between A and B (-5 to 5V range). The length of sequences can be set via the pushbuttons - while a sequence is running. RESET, UP/DOWN, HOLD inputs. Switch to start / stop the sequencer. PULSE STAGE SELECT inputs allow selecting specific stages. great at audio rates. ALL GATE output goes high when any button is pressed (or a stage is selected by a pulse input) and allows the use of the SEQ8 as a simple mini-keyboard.
Read more
MRP:$648.34 SAVE 17%
 1 in stock $540.27
Click for better price!
or call +44 20 7424 1960
quote 757144
Serge Modular 8-Stage Sequencer & Programmer Special Edition Module With 4U Pushbuttons
Cat: 757146 Rel: 15 Oct 20
 
Sequencer/programmer module
Notes: The SEQ XL is a modern incarnation of Serge's analog sequencer / programmer. 8 stages. 2 rows of CV output. A - B (A minus B) outouts the difference between A and B (-5 to 5V range). The length of sequences can be set via the pushbuttons - while a sequence is running. RESET, UP/DOWN, HOLD inputs. Switch to start / stop the sequencer. PULSE STAGE SELECT inputs allow selecting specific stages. great at audio rates. ALL GATE output goes high when any button is pressed (or a stage is selected by a pulse input) and allows the use of the SEQ8 as a simple mini-keyboard.
Read more
MRP:$733.13 SAVE 17%
 1 in stock $610.94
Click for better price!
or call +44 20 7424 1960
quote 757146
Mutable Instruments Shades Attenuator Offset Mixer Module (2020)
Cat: 794969 Rel: 14 Oct 20
 
attenuator / offset / mixer synth module
Notes: 2020 update of this versatile three-channel mixer/attenuverter. Versatile and effective, updated with a fresh look to match Mutable's other modules.

Supplier's Notes:
The mixer/attenuverter that does not get in the way.

Shades provides 3 channels of audio/CV processing which can be configured either as active attenuators or as attenuverters.

Unconnected inputs are normalized to an internal precision voltage reference, which can produce either a +5V or +10V constant voltage.

Shades' outputs are daisy-chained, allowing adjacent groups of 2 or 3 channels to be mixed together.

This 2020 revision matches the design language used in the most popular and recent Mutable Instruments modules like Marbles, Plaits or Rings.

Useful in every patch.

Mix audio sources or CVs.

Add offsets to CVs, or change their polarity.

A companion for other modules.

Transpose the output of a sequencer without compromising V/O tracking.

Attenuate/invert CVs sent to modules which do not have attenuverters on their CV inputs.

Control with a knob parameters of other modules that are only accessible through CV inputs (like Just Friends' RUN or the Dixie's PW).

6HP
25mm
+12V:15mA
-12V:15mA

Specifications:

Input impedance: 100k.

All inputs DC-coupled.

Low-distortion audio op-amps and thin film 0.1% resistors improve transparency in audio mixing applications, and allow exact unitary gains for precision summing of pitch CV signals.

Stable and precise voltage reference, independent of power supply fluctuations.
Read more
MRP:$116.10 SAVE 23%
 More than 10 in stock $89.68
Serge Modular Wave Multipliers Module
Cat: 757126 Rel: 15 Oct 20
 
Wave multipliers module
Notes: The legendary Serge Wave Multipliers (VCM) are designed to dynamically add new harmonically-related overtones to an input waveform. Accroding to the 1982 catalogue, they alter the timbre in exciting new ways, producing interesting alternative forms of signal processing which are unique in the Serge Modular Music System. Since there are three entirely separate and different types of Wave Multipliers in this module, an enormously varied palette of new effects can be synthesized.

The top section offers two different modes, selected by a switch. In the HI position, the module functions to square-up an incoming signal, with a rounded flattening of the signal peaks, somewhat similar to overdriving a tube amplifier (with voltage control!). In LO mode, the module is a linear gain controlled VCA. This is useful for various functions such as amplitude modulation and for gating signals into the other sections.

The middle section generates a sweep of the odd harmonics (1, 3, 5, 7, 9, 11 and 13th) when a sine wave is applied to its input and the FOLD knob is turned up or a control voltage is swept from low to high. This effect is similar to overblowing a wind pipe closed at one end. A second input is included to allow two signals to be mixed before processing. This module can be used to explore timbral areas beyond the range of ring modulation.

The bottom Wave Multiplier performs non-linear wavehaping known as full-wave rectification, but with sophisticated level-compensating conditioning as well. The circuit uses three full-wave rectifier sections linked in a very refined controllable format. Sweeping the VC input over its range will produce a smooth timbral transition using the even harmonics (second, fourth, and eighth). Many other partials are present in this basic sound, however, and the sonorities are very rich and varied. The white output is a squared up version of the black one, resembling an harmonically enhanced pulse width modulation.

The Random*Source version of the Serge Wave Mulitpliers for Euro is a licensed and authorized adaption of the original Serge design, using best parts available today (e.g. Burr-Brown op-amps, C0G capacitors up to 220N) for optimum audio performance.
Read more
MRP:$374.39 SAVE 17%
 1 in stock $311.98
Click for better price!
or call +44 20 7424 1960
quote 757126
Serge Modular Triple+ Waveshaper Module
Cat: 757127 Rel: 15 Oct 20
 
Triple waveshaper module
Notes: The Triple Waveshaper (TWS) is a non-linear modifier which can transform a sawtooth wave into a sine wave. This classic module incorporates three independent waveshapers for modifying synthesizer waveforms or for processing signals from preamplified instruments. Although originally designed as a waveshaper for early Serge oscillators, this module has been found to be a excellent modifier of electronic and acoustic sounds, and is highly recommended for subtle timbral modifications beyond the range of simple oscillator/filter patches.

The R*S version extends the classic TWS concept:

+1: An additional (4th) waveshaper has been added (right after the first / bottom waveshaper) that can be dialed in smoothly using the +1 knob. Turned down (CCW) the bottom section acts as in the original (as if that additional waveshaper would not exist). Turned up (CW) the bottom section is actually 2 waveshapers in series.

Switches to link the 3 sections - bottom to top. Using these switches all sections can be set to act in series, starting at the bottom and ending at the top, providing the combined effect of 3 to 4 waveshapers (or anything in between) using the +1 knob.

Linking only the middle and top section and turning the +1 knob up (to have 2 sections in the bottom) allows you to use the module for isntance as two independent 2-stage waveshapers (using bottom in and out for one and middle in and top out for the other) - e.g. for stereo processing.
Read more
MRP:$331.34 SAVE 17%
 1 in stock $276.11
Click for better price!
or call +44 20 7424 1960
quote 757127
Serge Modular ÷N COM Divide By N Comparator Module
Cat: 757140 Rel: 15 Oct 20
 
Comparator module
Notes: The Serge Divide by N Comparator (NCOM) is a rare, much sought-after and very essential Serge module covering a number of functions: comparator, voltage-controlled pulse divider, and voltage-controlled staircase generator.

The #N COMPARATOR consists of two sections - a comparator (right side) and a voltage-controlled pulse divider (left side). The #N output of the pulse divider sends out a pulse on every N-th comparator pulse where N is a number from 1 to 31. N can be (pre-)set with the divider's control knob (1 #N) and can by changed with a control voltage. The VC knob (attenuator)on the bottom of the left side determines how much effect the control voltage has on "N". In addition, the divider generates a staircase waveform with N steps. This can be used to produce whole-tone steps when run into the 1V/Oct input of a VCO or as a stepped control voltage to change for instance the cutoff of a filter.

The comparator provides a number of useful "housekeeping functions": Logical decisions (if the +input is greater than the -input, the output will be high, otherwise low), Level detection (whenever a variable waveform crosses the theshold, a pulse is generated ), Pulse width modulation or Rectifying a waveform (e.g. a sine or triangle wave).
Read more
MRP:$268.73 SAVE 17%
 1 in stock $223.93
Click for better price!
or call +44 20 7424 1960
quote 757140
Serge Modular Ring Modulator Module
Cat: 757142 Rel: 15 Oct 20
 
Ring modulator module
Notes: The 2017 RING is an improved version of the late Serge Ring Modulator (R9), designed by Serge himself for Random*Source in 2017, more than 40 years after the launch of the Serge Modular system. According to Serge, the RING is one of the most sophisticated modules in the Serge system. The new version has been developed by Serge for and in close cooperation with Random Source.
Read more
MRP:$339.17 SAVE 17%
 1 in stock $282.63
Click for better price!
or call +44 20 7424 1960
quote 757142
Tangible Waves AE Modular FMOS FM Synthesis Module
Cat: 786477 Rel: 16 Oct 20
 
Synthesis module
Notes: FM synthesis for the AE!

The FMOS is a new digital oscillator that brings FM synthesis to the AE modular! It offers the basic FM synthesis with one oscillator and one modulator, running both with sine waves or triangle waves. The modulation depth and frequency ratio of the modulator can be set with a knob and additionally by CV control. If you want pure sine waves, this is for you too - simply set the modulation level to 0.

The module is based on a simple 8-bit microcontroller and an adapted design of Jan Ostman.
Read more
MRP:$53.48 SAVE 17%
 1 in stock $44.56
Items 1 to 12 of 12 on page 1 of 1

Filter

Synth modules
商品
Release Date
Featured
Close