安全购物

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

安全购物

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Synth modules

首页  Equipment  

Synth modules

Options
Items 1 to 16 of 16 on page 1 of 1
Subscribe to our weekly Studio Equipment emails
Behringer 140 Dual Envelope/LFO Module
Cat: 772884 Rel: 19 Oct 20
 
dual envelope & LFO module
Notes: This is the Behringer SYSTEM 100 140 DUAL ENVELOPE/LFO. An authentic reproduction of the original System 100M circuitry from the 80's that can fit in a standard Eurorack case. The best part? It's at a very affordable price. Mix the 140 DUAL ENVELOPE/LFO in with your existing rig or start your modular synth journey from here. Either way you're sure to have a lot of fun.

The 140 DUAL ENVELOPE/LFO features 2 independent ADSR envelope generators that can be controlled via an external gate or manual triggering. Each envelope generator comes with a Manual Gate that you can press and hold to start the envelope cycle; independent Attack, Decay, Sustain and Release controls to adjust the rate of these parameters and 3.5 mm envelope outputs that allows you to send up to two positive wave forms out to two modules and one negative wave form.

The LFO on the 140 comes with 5 waveforms: sine, triangle, square, ramp and saw tooth. The Frequency Range switch which sets the oscillating frequency of the LFO along with the Frequency and Delay sliders gives the 140 unparalleled flexibility when it comes to shaping LFO's. You can also connect an external trigger switch which can work with the Delay control to phase lock the LFO to your keyboard playing.

Installing the 140 DUAL ENVELOPE/LFO is designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the 140 to be mixed with other synth modules for a truly unique set up.
Read more
 7 in stock $108.80
Click for better price!
or call +44 20 7424 1960
quote 772884
Behringer 995 Attenuators Module
Cat: 772930 Rel: 19 Oct 20
 
attenuators module
Notes: Enter the Behringer 995 ATTENUATORS. An authentic reproduction of the circuitry from the Modular 55 and 15 series attenuators used by the world's most famous pop, rock and jazz musicians. Now you can build your very own, unique synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match with specific modules to customize your synth and complement the genre of music you play or go all out and have a room filled from floor to ceiling with modules that'll fulfill any synth geek's wildest dreams.

The 995 features three separate attenuators each with their own independent inputs and outputs. The attenuators can be used to adjust the level of the input signal passively from - 8 to unity gain and accept both audio and CV signals. Connecting a single signal to the first input will allow it to pass to all 3 outputs for up to 3 variable outputs of a single signal source. Introducing a signal into the subsequent outputs will break the chain from the previous input. For example, if you have a signal in input 2, then this will feed into input 3 leaving input 1 to feed out of output 1.

Installing the 995 is simple as it was designed to fit into a standard Eurorack case. This allows for the 995 to be mixed with other synth modules for a truly unique set up.
Read more
 More than 10 in stock $54.39
Click for better price!
or call +44 20 7424 1960
quote 772930
Behringer 904B VC High Pass Filter Module
Cat: 772804 Rel: 19 Oct 20
 
filter module
Notes: Enter the Behringer 904B VOTLAGE CONTROLLED HIGH PASS FILTER Module. A vintage-sounding authentic reproduction of the circuitry from the Modular 55 & 35 Series used by the world's most famous pop, rock and jazz musicians for their shows. Now, musicians can build their very own, unique, synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match specific modules to create your personal, unique synth to complement the music you play or go all out and fill a room, from floor to ceiling, with modules that'll fulfill any synth geek's wildest dream.

The 904B VOLTAGE CONTROLLED HIGH PASS FILTER allows you to attenuate low frequencies and accentuate higher ones in a signal. With the Fixed Control Voltage knob, also known as a cutoff frequency, determines the frequencies attenuated below a certain point. Switch the Frequency Range between Low (4 Hz to 20 kHz) or High (10Hz to 50 kHz) to select what frequencies the Fixed Control Voltage affects. You can use the 904B to let you cut through a mix for some searing lead tones or pair it with the Behringer 904A VOLTAGE CONTRLLED LOW PASS FILTER and be prepared to hear some very interesting sounds.

Audio in and out connectors are available on the 904B that let you process an incoming signal before sending it to another module via a 3.5 mm TS cable. You can also use the Control Inputs to connect voltage signals from other modules to affect the cutoff frequency. Use this module to add distinct tweaks to your patches so you can create more unique sounds.

Installing the 904B VOLTAGE CONTROLLED HIGH PASS FILTER is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the 904B VOLTAGE CONTROLLED HIGH PASS FILTER to be mixed with other synth modules for a truly unique set up.
Read more
 More than 10 in stock $106.62
Click for better price!
or call +44 20 7424 1960
quote 772804
Behringer 923 Filters Module
Behringer 923 Filters Module (eurorack module)
Cat: 772935 Rel: 19 Oct 20
 
filters module
Notes: Enter the Behringer 923 FILTERS. An authentic reproduction of the circuitry from the Modular 35 and 15 series filters used by the world's most famous pop, rock and jazz musicians. Now you can build your very own, unique synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match with specific modules to customize your synth and complement the genre of music you play or go all out and have a room filled from floor to ceiling with modules that'll fulfill any synth geek's wildest dreams.

The 923 features separate Low and High Pass filters each with their own dedicated frequency cutoff controls. The Low Pass filter control will roll off all frequencies above the set threshold frequency from 10Hz to 10KHz while the High Pass filter control will roll off frequencies below the set frequency. Each filter comes with their own 3.5 mm ins and outs giving you the ability to route incoming signals through the IN jack, through the filter and back out the OUT jack.

For you to shape an endless number of tones, the 923 comes with a white and pink noise generator. Use the parallel jacks for each of the noise sources to send out a white or pink noise signal and start sweeping frequencies to build tension and excitement in your songs, or use them to create some percussive sounds for a real groovy drum beat.

Installing the 923 is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the 923 to be mixed with other synth modules for a truly unique set up.
Read more
 More than 10 in stock $84.85
Click for better price!
or call +44 20 7424 1960
quote 772935
Behringer 994 Multiples Module
Cat: 772832 Rel: 19 Oct 20
 
multiples module
Notes: Enter the Behringer 994 MULTIPLES Module. An authentic reproduction of the circuitry from the Modular 55 Series used by the world's most famous pop, rock and jazz musicians. Now, musicians can build their very own, unique, synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match specific modules to create your personal, unique synth to complement the music you play or go all out and fill a room, from floor to ceiling, with modules that'll fulfill any synth geek's wildest dream.

The dual 4-socket multiples of the 994 MUTLIPLES allows you to split CV or audio signals to multiple destinations. Now, one signal can control several modules.

Installing the 994 MULTIPLES is simple as it was designed to fit into a standard Eurorack case. This allows for the 994 MULTIPLES to be mixed with other synth modules for a truly unique set up.
Read more
 More than 10 in stock $33.72
Behringer 903A Random Signal Generator
Cat: 772802 Rel: 19 Oct 20
 
signal generator
Notes: Enter the Behringer 903A RANDOM SIGNAL GENERATOR Module, a vintage-sounding noise generator from the '70s. An authentic reproduction of the circuitry from the "Modular 55" series used by the world's most famous pop, rock and jazz musicians. Now, musicians can build their very own, unique, synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match specific modules to create your personal, unique synth to complement the music you play or go all out and fill a room, from floor to ceiling, with modules that'll fulfill any synth geek's wildest dream.

Enter the Behringer 903A RANDOM SIGNAL GENERATOR Module, a vintage-sounding noise generator from the '70s. An authentic reproduction of the circuitry from the Modular 55 series used by the world's most famous pop, rock and jazz musicians. Now, musicians can build their very own, unique, synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match specific modules to create your personal, unique synth to complement the music you play or go all out and fill a room, from floor to ceiling, with modules that'll fulfill any synth geek's wildest dream.

The 903A RANDOM SIGNAL GENERATOR generates both white and pink noise via two 3.5 mm outputs each allowing you to send different signals to other modules in your rig.

Installing the 903A RANDOM SIGNAL GENERATOR is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the 903A RANDOM SIGNAL GENERATOR to be mixed with other synth modules for a truly unique set up.

Read more
 More than 10 in stock $54.39
Click for better price!
or call +44 20 7424 1960
quote 772802
Behringer 921B VCO Module
Behringer 921B VCO Module (oscillator module)
Cat: 780467 Rel: 19 Oct 20
 
VCO module
Notes: Clone of the Moog 921B module, a free-running LFO or oscillator driven by the accompanying 921A oscillator driver module. An affordable entry point to classic Moog-inspired sounds.

Supplier's Notes:
Enter the Behringer 921B OSCILLATOR. An authentic reproduction of the circuitry from the "Modular 55 and 35" series oscillators used by the world's most famous pop, rock and jazz musicians. Now you can build your very own, unique synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match with specific modules to customize your synth and complement the genre of music you play or go all out and have a room filled from floor to ceiling with modules that'll fulfill any synth geek's wildest dreams.

The 921B OSCILLATOR module is controlled by the Behringer 921A OSCILLATOR DRIVER or can be used as a free-running LFO. Separate Frequency and Range knobs allow you to adjust the frequency range in semitones and in octaves. The 921B along with the 921A modules form the foundation of a proper modular synthesizer and the basis for some really great music.

The 921B OSCILLATOR features independent audio outs for each of the 4 waveforms which include sine, triangular, sawtooth and rectangular which can be patched out to different modules to unlock even more creative possibilities. A dedicated oscillator sync input and switch can be used to sync the 921B to a signal introduced into the Sync In jack. Parallel link jacks allow the 921B to link to other 921B in the chain.

Installing the 921B OSICLLATOR is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the 921B OSICLLATOR to be mixed with other synth modules for a truly unique set up.
Read more
 More than 10 in stock $108.80
Click for better price!
or call +44 20 7424 1960
quote 780467
Behringer 961 Interface Module
Cat: 772932 Rel: 19 Oct 20
 
interface module
Notes: Enter the Behringer 961 INTERFACE Module. An authentic reproduction of the circuitry from the Modular 55 Series used by the world's most famous pop, rock and jazz musicians. Now, musicians can build their very own, unique, synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match specific modules to create your personal, unique synth to complement the music you play or go all out and fill a room, from floor to ceiling, with modules that'll fulfill any synth geek's wildest dream.

The 961 features an audio to V-Trig Converter, allowing you to plug in any audio source and transform it into a voltage trigger to drive other modules in your rig. Dual S-Trig to V-Trig and a multichannel V-Trig to S-Trig converters on the 961 can be utilized to switch or control a particular function on other modules.

Controls on the 961 include a Sensitivity knob that adjusts the gain of the audio signal coming into the module via the Audio In jack. Column B in each V-Trig In bank has a Switch-On Time knob you can use to manually control how short or long the "ON" duration is for S-Trig signals. This feature is normally used to drive the 911 envelope generator. Add a 960 sequential controller to release the full creative potential of this interface module.

Installing the 961 INTERFACE is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and mount the module using the included screws. This allows for the 961 INTERFACE to be mixed with other synth modules for a truly unique set up.
Read more
 More than 10 in stock $84.85
Click for better price!
or call +44 20 7424 1960
quote 772932
Behringer 121 Dual VCF Module
Cat: 772865 Rel: 19 Oct 20
 
dual VCF module
Notes: This is the Behringer SYSTEM 100 121 DUAL VCF Module. An authentic reproduction of the original System 100M circuitry from the 80s that can fit in a standard Eurorack case, at a very affordable price. Mix the 121 DUAL VCF in with your existing rig or start your modular synth journey from here.

The 121 DUAL VCF features 3 CV inputs and 3-channel mixers per VCF; allowing you to independently mix all input signals. All of these inputs have their own attenuators to provide you more control over each signal that goes into the module.

Each VCF has its own output accompanied by a resonance slider that boosts resonance frequencies and a cutoff control to adjust the cutoff frequency of the lowpass filter. The 121 DUAL VCF also features a 3-mode Fixed HPF switch where you can select between Off, 1 (1 kHz), 2 (2 kHz) or 3 (5 kHz). Combine this with the resonance and cutoff sliders to create intricate and interesting patches.

Installing the 121 DUAL VCF is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the 121 DUAL VCF to be mixed with other synth modules for a truly unique set up.
Read more
 More than 10 in stock $106.62
Click for better price!
or call +44 20 7424 1960
quote 772865
Behringer 173 Quad Gate/Multiples Module
Cat: 772876 Rel: 19 Oct 20
 
quad gate & multiples module
Notes: This is the Behringer SYSTEM 100 173 QUAD GATE/MULTIPLES. An authentic reproduction of the original System 100M circuitry from the 80s that can fit in a standard Eurorack case. The best part? It's at a very affordable price. Mix the 173 QUAD GATE/MULTIPLES in with your existing rig to expand its capabilities and you're sure to have a lot of fun.

The SYSTEM 100 173 QUAD GATE/MULTIPLES Module features 4 signal gates (switches) with buffered audio inputs and outputs for immediate signal switching. This provides users the option to choose between a control gate operation, non-inverting (active high) input or an inverting (active low) input.

6-channel multiples, each with 4 floating parallel connectors, are available for optimal signal integrity. You can now send out your signal to other modules to help you create more intricate patches and deliver more compelling sounds from one source.

Installing the SYSTEM 100 173 QUAD GATE/MULTIPLES is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the SYSTEM 100 173 QUAD GATE/MULTIPLES to be mixed with other synth modules for a truly unique set up.
Read more
 7 in stock $83.77
Click for better price!
or call +44 20 7424 1960
quote 772876
Behringer 150 Ring Mod/Noise/S&H/LFO Module
Cat: 772880 Rel: 20 Oct 20
 
150 ring/mod/S&H/LFO module
Notes: This is the Behringer SYSTEM 100 150 RING MOD/NOISE/S&H/LFO. An authentic reproduction of the original System 100M circuitry from the 80's that can fit in a standard Eurorack case- at a very affordable price. Mix the 150 RING MOD/NOISE/S&H/LFO in with your existing rig or start your modular synth journey from here. Either way you're sure to have a lot of fun.

The 150 RING MOD/NOISE/S&H/LFO comes with a ring modulator to create some metallic and bell-like sounds that can be applied to any signal such as a sine wave or a signal from an LFO via the EXT SIG X/NOISE and EXT SIG Y/LFO jacks and out the RING MOD output. The LFO features 5 waveforms including sine, triangle square, ramp and sawtooth. Parameters can be further adjusted by the FREQ and DELAY sliders.

If you want to start layering your song on a droning note or maybe just create some ambience in your music, then you can connect any external signal source into the S&H circuit. A 3-way selector switch allows you to select which type of signal being introduced into the SIG IN jack whether its External Input, LFO or Noise.

Installing the 150 RING MOD/NOISE/S&H/LFO is designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the 140 to be mixed with other synth modules for a truly unique set up.
Read more
 6 in stock $88.11
Click for better price!
or call +44 20 7424 1960
quote 772880
Joranalogue Fold 6 Multi-Topology Wavefolder Module
Cat: 790028 Rel: 21 Oct 20
 
Wavefolder module
Notes: Designed with versatility in mind, the Fold 6 is a six-stage wavefolder with simultaneous series and parallel outputs, dual signal inputs and voltage-controlled folding and overdrive shaping.

Supplier's Notes:
Often considered to be the opposite of filters within a modular system, wavefolders are designed to fold a signal over itself multiple times. This generates additional harmonics, resulting in rich timbres.

While there is a bewildering array of filter types within the synthesiser world, most wavefolders fall within only a few categories. Diode wavefolders in particular come in just two variants: series and parallel circuit topologies. Choosing a specific folder also means being limited to specific sounds and capabilities.

For the first time, Fold 6 puts forward a 6-stage hybrid series/parallel topology, yielding a greater sonic palette than ever in just 4 HP. Having both main (series) and alternate (parallel) outputs means a single module now gives access to just about all wavefolding tones imaginable.

To take things even further, an integrated symmetrical soft clipper limits the output signals to approximately 10 Vpp, keeping the amplitude within typical Eurorack levels and making it easier to create overdriven sounds at high fold ratios. This clipping stage can be driven continuously using the shape parameter, smoothly transforming the folded waveforms into pulse waves for even more harmonic content.

Two signal inputs are included, to mix audio signals or add in a DC voltage for asymmetric folding. The symmetry can also be manually controlled using the dedicated knob. Of course, both fold and shape parameters feature voltage control, to enable continuous timbral modulation.

Moving beyond simple signal processing, Fold 6 also lends itself perfectly for feedback patching, CV folding or frequency multiplication; its modest size belies the sonic capabilities within.

Read more
MRP:$189.31 SAVE 21%
 4 in stock $149.06
Click for better price!
or call +44 20 7424 1960
quote 790028
Tangible Waves AE Modular OR2x4 CV Generation & Manipulation Module
Cat: 786483 Rel: 19 Oct 20
 
CV generation & manipulation module
Notes: The OR2x4 module combines 2x4 inputs by logical OR rule; the input signals are usually trigger/gate signals and are treated as digital signals.

This can be used either for "mixing" gate/trigger signals from different sources or for audio signals. too.

There are two independent units with four inputs each. With a switch all eight inputs can be linked to an 8-input OR.

With the GATE inputs the signal can be controlled further; if GATE gets a "low" signal then the output is low also. By this, the output can be synced to a common clock signal and even if one of the inputs remains high the output changes. If the GATE input remains open, the module operates as a regular OR gate.
Read more
MRP:$31.33 SAVE 17%
 2 in stock $26.10
Tangible Waves AE Modular RACKLINK 2 x Module Kit (connect 2 AE cases using RACKLINK)
Cat: 719690 Rel: 19 Oct 20
 
2 x Eurorack modules + cable
Notes: Connect two AE cases with RACKLINK!

The RACKLINK is a module for connecting two AE cases; the kit contains of 2 identical modules and a connector cable (length 50 cm). The modules are placed in both cases and are connected by the cable.

By this, you get the following:

The second case is powered by the first one

All bus lines (CV, GATE, CONTROL, MIDI clock/start/stop) are connected to the second case

Additionally, there are 8 connections that can be freely used; so it is not necessary to have connections between two cases. E.g. the second rack can run a patch for a drone sound, the output is then sent via Racklink line 1 to the first rack and here patched to a mixer, via line 2 the second rack can receive a modulation signal from the first one. The lines are bi-directional!
Read more
MRP:$49.61 SAVE 17%
! low stock $41.34
Click for better price!
or call +44 20 7424 1960
quote 719690
Tangible Waves AE Modular ALGODRONE Bytebeat Algorithms Module
Cat: 786475 Rel: 19 Oct 20
 
Algorithms module
Notes: Explore the world of bytebeat algorithms with ALGODRONE!

The ALGODRONE module is a sound source based on the so-called bytebeat algorithms. These are simple formulas, usually expressed as one line of program code, that spit out a wide variety of interesting tonal to rhythmical patterns, regardless of their simplicity.

The ALGODRONE module contains a number of these algorithms plus three parameter knobs that change values within the current algorithm. These changes vary from subtle to dramatic, even with small changes, depending on the algorithm and the setting of the other parameters.

Some algorithms create sound loops, to use these more flexible the ALGODRONE can work in a kind of "granular" mode where a smaller part of the entire loop is repeated and with the POSITION knob you can move through the entire output loop.

To maximize the variability, the parameter and "granular" values can be CV controlled too!

All in all a real kaleidoscope that will surprise you every time!
Read more
MRP:$100.53 SAVE 17%
 2 in stock $83.77
Click for better price!
or call +44 20 7424 1960
quote 786475
Tiptop Audio Fold Processor Wave Multiplier & Sub-Octave Generator Module (black faceplate)
Cat: 794940 Rel: 21 Oct 20
 
waveshaper / frequency divider synth module
Notes: The Fold Processor is a voltage-controlled wave multiplier and sub-octave generator. The circuit is based on a classic diode design that adds odd harmonics by folding the incoming signal, followed by subdivided square waves.

The wave folder creates new waveforms from standard sine, triangle, sawtooth, and square waves and includes a CV input with an attenuator, making it very easy to create beautifully animated folding sounds. Adjustable voltage-controlled Inject alters the bias point creating an even wider palette of sounds.

The subdivide generator squares the fold output generating 4 more sounds spaced one octave apart, each with its own gain knob and mixed to the Subdivide output jack. Mixing the four can create anything from discordant square wave swarms to sweet harmonic oscillator stacks, from a stable square version of the folded wave to freaky PLL-like glitched slides.

Overall results can sound evil at times and sweet at others, a true multi-faced devil.

Size: 12HP
Depth: 31mm
Power: +12V 60ma / -12V 55ma
Read more
MRP:$185.40 SAVE 17%
 3 in stock $154.49
Click for better price!
or call +44 20 7424 1960
quote 794940
Items 1 to 16 of 16 on page 1 of 1

Filter

Synth modules
商品
Release Date
Featured
Close