安全购物

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

安全购物

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Synth modules

首页  Equipment  

Synth modules

Options
Items 1 to 31 of 31 on page 1 of 1
Subscribe to our weekly Studio Equipment emails
Behringer 121 Dual VCF Module
Cat: 772865 Rel: 19 Oct 20
 
dual VCF module
Notes: This is the Behringer SYSTEM 100 121 DUAL VCF Module. An authentic reproduction of the original System 100M circuitry from the 80s that can fit in a standard Eurorack case, at a very affordable price. Mix the 121 DUAL VCF in with your existing rig or start your modular synth journey from here.

The 121 DUAL VCF features 3 CV inputs and 3-channel mixers per VCF; allowing you to independently mix all input signals. All of these inputs have their own attenuators to provide you more control over each signal that goes into the module.

Each VCF has its own output accompanied by a resonance slider that boosts resonance frequencies and a cutoff control to adjust the cutoff frequency of the lowpass filter. The 121 DUAL VCF also features a 3-mode Fixed HPF switch where you can select between Off, 1 (1 kHz), 2 (2 kHz) or 3 (5 kHz). Combine this with the resonance and cutoff sliders to create intricate and interesting patches.

Installing the 121 DUAL VCF is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the 121 DUAL VCF to be mixed with other synth modules for a truly unique set up.
Read more
 More than 10 in stock $106.63
Click for better price!
or call +44 20 7424 1960
quote 772865
Behringer 140 Dual Envelope/LFO Module
Cat: 772884 Rel: 19 Oct 20
 
dual envelope & LFO module
Notes: This is the Behringer SYSTEM 100 140 DUAL ENVELOPE/LFO. An authentic reproduction of the original System 100M circuitry from the 80's that can fit in a standard Eurorack case. The best part? It's at a very affordable price. Mix the 140 DUAL ENVELOPE/LFO in with your existing rig or start your modular synth journey from here. Either way you're sure to have a lot of fun.

The 140 DUAL ENVELOPE/LFO features 2 independent ADSR envelope generators that can be controlled via an external gate or manual triggering. Each envelope generator comes with a Manual Gate that you can press and hold to start the envelope cycle; independent Attack, Decay, Sustain and Release controls to adjust the rate of these parameters and 3.5 mm envelope outputs that allows you to send up to two positive wave forms out to two modules and one negative wave form.

The LFO on the 140 comes with 5 waveforms: sine, triangle, square, ramp and saw tooth. The Frequency Range switch which sets the oscillating frequency of the LFO along with the Frequency and Delay sliders gives the 140 unparalleled flexibility when it comes to shaping LFO's. You can also connect an external trigger switch which can work with the Delay control to phase lock the LFO to your keyboard playing.

Installing the 140 DUAL ENVELOPE/LFO is designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the 140 to be mixed with other synth modules for a truly unique set up.
Read more
 6 in stock $107.71
Click for better price!
or call +44 20 7424 1960
quote 772884
Behringer 150 Ring Mod/Noise/S&H/LFO Module
Cat: 772880 Rel: 20 Oct 20
 
150 ring/mod/S&H/LFO module
Notes: This is the Behringer SYSTEM 100 150 RING MOD/NOISE/S&H/LFO. An authentic reproduction of the original System 100M circuitry from the 80's that can fit in a standard Eurorack case- at a very affordable price. Mix the 150 RING MOD/NOISE/S&H/LFO in with your existing rig or start your modular synth journey from here. Either way you're sure to have a lot of fun.

The 150 RING MOD/NOISE/S&H/LFO comes with a ring modulator to create some metallic and bell-like sounds that can be applied to any signal such as a sine wave or a signal from an LFO via the EXT SIG X/NOISE and EXT SIG Y/LFO jacks and out the RING MOD output. The LFO features 5 waveforms including sine, triangle square, ramp and sawtooth. Parameters can be further adjusted by the FREQ and DELAY sliders.

If you want to start layering your song on a droning note or maybe just create some ambience in your music, then you can connect any external signal source into the S&H circuit. A 3-way selector switch allows you to select which type of signal being introduced into the SIG IN jack whether its External Input, LFO or Noise.

Installing the 150 RING MOD/NOISE/S&H/LFO is designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the 140 to be mixed with other synth modules for a truly unique set up.
Read more
 5 in stock $87.24
Click for better price!
or call +44 20 7424 1960
quote 772880
Behringer 173 Quad Gate/Multiples Module
Cat: 772876 Rel: 19 Oct 20
 
quad gate & multiples module
Notes: This is the Behringer SYSTEM 100 173 QUAD GATE/MULTIPLES. An authentic reproduction of the original System 100M circuitry from the 80s that can fit in a standard Eurorack case. The best part? It's at a very affordable price. Mix the 173 QUAD GATE/MULTIPLES in with your existing rig to expand its capabilities and you're sure to have a lot of fun.

The SYSTEM 100 173 QUAD GATE/MULTIPLES Module features 4 signal gates (switches) with buffered audio inputs and outputs for immediate signal switching. This provides users the option to choose between a control gate operation, non-inverting (active high) input or an inverting (active low) input.

6-channel multiples, each with 4 floating parallel connectors, are available for optimal signal integrity. You can now send out your signal to other modules to help you create more intricate patches and deliver more compelling sounds from one source.

Installing the SYSTEM 100 173 QUAD GATE/MULTIPLES is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the SYSTEM 100 173 QUAD GATE/MULTIPLES to be mixed with other synth modules for a truly unique set up.
Read more
 7 in stock $84.01
Click for better price!
or call +44 20 7424 1960
quote 772876
Behringer 903A Random Signal Generator
Cat: 772802 Rel: 19 Oct 20
 
signal generator
Notes: Enter the Behringer 903A RANDOM SIGNAL GENERATOR Module, a vintage-sounding noise generator from the '70s. An authentic reproduction of the circuitry from the "Modular 55" series used by the world's most famous pop, rock and jazz musicians. Now, musicians can build their very own, unique, synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match specific modules to create your personal, unique synth to complement the music you play or go all out and fill a room, from floor to ceiling, with modules that'll fulfill any synth geek's wildest dream.

Enter the Behringer 903A RANDOM SIGNAL GENERATOR Module, a vintage-sounding noise generator from the '70s. An authentic reproduction of the circuitry from the Modular 55 series used by the world's most famous pop, rock and jazz musicians. Now, musicians can build their very own, unique, synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match specific modules to create your personal, unique synth to complement the music you play or go all out and fill a room, from floor to ceiling, with modules that'll fulfill any synth geek's wildest dream.

The 903A RANDOM SIGNAL GENERATOR generates both white and pink noise via two 3.5 mm outputs each allowing you to send different signals to other modules in your rig.

Installing the 903A RANDOM SIGNAL GENERATOR is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the 903A RANDOM SIGNAL GENERATOR to be mixed with other synth modules for a truly unique set up.

Read more
 More than 10 in stock $56.01
Click for better price!
or call +44 20 7424 1960
quote 772802
Behringer 904B VC High Pass Filter Module
Cat: 772804 Rel: 19 Oct 20
 
filter module
Notes: Enter the Behringer 904B VOTLAGE CONTROLLED HIGH PASS FILTER Module. A vintage-sounding authentic reproduction of the circuitry from the Modular 55 & 35 Series used by the world's most famous pop, rock and jazz musicians for their shows. Now, musicians can build their very own, unique, synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match specific modules to create your personal, unique synth to complement the music you play or go all out and fill a room, from floor to ceiling, with modules that'll fulfill any synth geek's wildest dream.

The 904B VOLTAGE CONTROLLED HIGH PASS FILTER allows you to attenuate low frequencies and accentuate higher ones in a signal. With the Fixed Control Voltage knob, also known as a cutoff frequency, determines the frequencies attenuated below a certain point. Switch the Frequency Range between Low (4 Hz to 20 kHz) or High (10Hz to 50 kHz) to select what frequencies the Fixed Control Voltage affects. You can use the 904B to let you cut through a mix for some searing lead tones or pair it with the Behringer 904A VOLTAGE CONTRLLED LOW PASS FILTER and be prepared to hear some very interesting sounds.

Audio in and out connectors are available on the 904B that let you process an incoming signal before sending it to another module via a 3.5 mm TS cable. You can also use the Control Inputs to connect voltage signals from other modules to affect the cutoff frequency. Use this module to add distinct tweaks to your patches so you can create more unique sounds.

Installing the 904B VOLTAGE CONTROLLED HIGH PASS FILTER is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the 904B VOLTAGE CONTROLLED HIGH PASS FILTER to be mixed with other synth modules for a truly unique set up.
Read more
 More than 10 in stock $105.55
Click for better price!
or call +44 20 7424 1960
quote 772804
Behringer 921B VCO Module
Behringer 921B VCO Module (oscillator module)
Cat: 780467 Rel: 19 Oct 20
 
VCO module
Notes: Clone of the Moog 921B module, a free-running LFO or oscillator driven by the accompanying 921A oscillator driver module. An affordable entry point to classic Moog-inspired sounds.

Supplier's Notes:
Enter the Behringer 921B OSCILLATOR. An authentic reproduction of the circuitry from the "Modular 55 and 35" series oscillators used by the world's most famous pop, rock and jazz musicians. Now you can build your very own, unique synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match with specific modules to customize your synth and complement the genre of music you play or go all out and have a room filled from floor to ceiling with modules that'll fulfill any synth geek's wildest dreams.

The 921B OSCILLATOR module is controlled by the Behringer 921A OSCILLATOR DRIVER or can be used as a free-running LFO. Separate Frequency and Range knobs allow you to adjust the frequency range in semitones and in octaves. The 921B along with the 921A modules form the foundation of a proper modular synthesizer and the basis for some really great music.

The 921B OSCILLATOR features independent audio outs for each of the 4 waveforms which include sine, triangular, sawtooth and rectangular which can be patched out to different modules to unlock even more creative possibilities. A dedicated oscillator sync input and switch can be used to sync the 921B to a signal introduced into the Sync In jack. Parallel link jacks allow the 921B to link to other 921B in the chain.

Installing the 921B OSICLLATOR is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the 921B OSICLLATOR to be mixed with other synth modules for a truly unique set up.
Read more
 More than 10 in stock $107.71
Click for better price!
or call +44 20 7424 1960
quote 780467
Behringer 923 Filters Module
Behringer 923 Filters Module (eurorack module)
Cat: 772935 Rel: 19 Oct 20
 
filters module
Notes: Enter the Behringer 923 FILTERS. An authentic reproduction of the circuitry from the Modular 35 and 15 series filters used by the world's most famous pop, rock and jazz musicians. Now you can build your very own, unique synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match with specific modules to customize your synth and complement the genre of music you play or go all out and have a room filled from floor to ceiling with modules that'll fulfill any synth geek's wildest dreams.

The 923 features separate Low and High Pass filters each with their own dedicated frequency cutoff controls. The Low Pass filter control will roll off all frequencies above the set threshold frequency from 10Hz to 10KHz while the High Pass filter control will roll off frequencies below the set frequency. Each filter comes with their own 3.5 mm ins and outs giving you the ability to route incoming signals through the IN jack, through the filter and back out the OUT jack.

For you to shape an endless number of tones, the 923 comes with a white and pink noise generator. Use the parallel jacks for each of the noise sources to send out a white or pink noise signal and start sweeping frequencies to build tension and excitement in your songs, or use them to create some percussive sounds for a real groovy drum beat.

Installing the 923 is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the 923 to be mixed with other synth modules for a truly unique set up.
Read more
 More than 10 in stock $84.01
Click for better price!
or call +44 20 7424 1960
quote 772935
Behringer 961 Interface Module
Cat: 772932 Rel: 19 Oct 20
 
interface module
Notes: Enter the Behringer 961 INTERFACE Module. An authentic reproduction of the circuitry from the Modular 55 Series used by the world's most famous pop, rock and jazz musicians. Now, musicians can build their very own, unique, synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match specific modules to create your personal, unique synth to complement the music you play or go all out and fill a room, from floor to ceiling, with modules that'll fulfill any synth geek's wildest dream.

The 961 features an audio to V-Trig Converter, allowing you to plug in any audio source and transform it into a voltage trigger to drive other modules in your rig. Dual S-Trig to V-Trig and a multichannel V-Trig to S-Trig converters on the 961 can be utilized to switch or control a particular function on other modules.

Controls on the 961 include a Sensitivity knob that adjusts the gain of the audio signal coming into the module via the Audio In jack. Column B in each V-Trig In bank has a Switch-On Time knob you can use to manually control how short or long the "ON" duration is for S-Trig signals. This feature is normally used to drive the 911 envelope generator. Add a 960 sequential controller to release the full creative potential of this interface module.

Installing the 961 INTERFACE is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and mount the module using the included screws. This allows for the 961 INTERFACE to be mixed with other synth modules for a truly unique set up.
Read more
 More than 10 in stock $85.09
Click for better price!
or call +44 20 7424 1960
quote 772932
Behringer 994 Multiples Module
Cat: 772832 Rel: 19 Oct 20
 
multiples module
Notes: Enter the Behringer 994 MULTIPLES Module. An authentic reproduction of the circuitry from the Modular 55 Series used by the world's most famous pop, rock and jazz musicians. Now, musicians can build their very own, unique, synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match specific modules to create your personal, unique synth to complement the music you play or go all out and fill a room, from floor to ceiling, with modules that'll fulfill any synth geek's wildest dream.

The dual 4-socket multiples of the 994 MUTLIPLES allows you to split CV or audio signals to multiple destinations. Now, one signal can control several modules.

Installing the 994 MULTIPLES is simple as it was designed to fit into a standard Eurorack case. This allows for the 994 MULTIPLES to be mixed with other synth modules for a truly unique set up.
Read more
 More than 10 in stock $33.39
Behringer 995 Attenuators Module
Cat: 772930 Rel: 19 Oct 20
 
attenuators module
Notes: Enter the Behringer 995 ATTENUATORS. An authentic reproduction of the circuitry from the Modular 55 and 15 series attenuators used by the world's most famous pop, rock and jazz musicians. Now you can build your very own, unique synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match with specific modules to customize your synth and complement the genre of music you play or go all out and have a room filled from floor to ceiling with modules that'll fulfill any synth geek's wildest dreams.

The 995 features three separate attenuators each with their own independent inputs and outputs. The attenuators can be used to adjust the level of the input signal passively from - 8 to unity gain and accept both audio and CV signals. Connecting a single signal to the first input will allow it to pass to all 3 outputs for up to 3 variable outputs of a single signal source. Introducing a signal into the subsequent outputs will break the chain from the previous input. For example, if you have a signal in input 2, then this will feed into input 3 leaving input 1 to feed out of output 1.

Installing the 995 is simple as it was designed to fit into a standard Eurorack case. This allows for the 995 to be mixed with other synth modules for a truly unique set up.
Read more
 More than 10 in stock $53.85
Click for better price!
or call +44 20 7424 1960
quote 772930
Frequency Central Logic Bomb Dual CV Addressable Boolean Logic Module
Cat: 795615 Rel: 16 Oct 20
 
Boolean logic/utility synth module
Notes: Logic Bomb is a Boolean logic module with two independent but identical sections.

Both sections feature addressable Boolean logic, with a choice of any one of:

NOT A

NOT B

AND

NAND

OR

NOR

XOR

XNOR

Logic gate type may be chosen either via knob or via CV input.

When addressed via CV, the knobs become attenuators. CV range is 0V to 5V.
Read more
MRP:$186.13 SAVE 23%
 1 in stock $143.26
Click for better price!
or call +44 20 7424 1960
quote 795615
Joranalogue Fold 6 Multi-Topology Wavefolder Module
Cat: 790028 Rel: 21 Oct 20
 
Wavefolder module
Notes: Designed with versatility in mind, the Fold 6 is a six-stage wavefolder with simultaneous series and parallel outputs, dual signal inputs and voltage-controlled folding and overdrive shaping.

Supplier's Notes:
Often considered to be the opposite of filters within a modular system, wavefolders are designed to fold a signal over itself multiple times. This generates additional harmonics, resulting in rich timbres.

While there is a bewildering array of filter types within the synthesiser world, most wavefolders fall within only a few categories. Diode wavefolders in particular come in just two variants: series and parallel circuit topologies. Choosing a specific folder also means being limited to specific sounds and capabilities.

For the first time, Fold 6 puts forward a 6-stage hybrid series/parallel topology, yielding a greater sonic palette than ever in just 4 HP. Having both main (series) and alternate (parallel) outputs means a single module now gives access to just about all wavefolding tones imaginable.

To take things even further, an integrated symmetrical soft clipper limits the output signals to approximately 10 Vpp, keeping the amplitude within typical Eurorack levels and making it easier to create overdriven sounds at high fold ratios. This clipping stage can be driven continuously using the shape parameter, smoothly transforming the folded waveforms into pulse waves for even more harmonic content.

Two signal inputs are included, to mix audio signals or add in a DC voltage for asymmetric folding. The symmetry can also be manually controlled using the dedicated knob. Of course, both fold and shape parameters feature voltage control, to enable continuous timbral modulation.

Moving beyond simple signal processing, Fold 6 also lends itself perfectly for feedback patching, CV folding or frequency multiplication; its modest size belies the sonic capabilities within.

Read more
MRP:$187.43 SAVE 21%
 4 in stock $147.58
Click for better price!
or call +44 20 7424 1960
quote 790028
Mutable Instruments Shades Attenuator Offset Mixer Module (2020)
Cat: 794969 Rel: 14 Oct 20
 
attenuator / offset / mixer synth module
Notes: 2020 update of this versatile three-channel mixer/attenuverter. Versatile and effective, updated with a fresh look to match Mutable's other modules.

Supplier's Notes:
The mixer/attenuverter that does not get in the way.

Shades provides 3 channels of audio/CV processing which can be configured either as active attenuators or as attenuverters.

Unconnected inputs are normalized to an internal precision voltage reference, which can produce either a +5V or +10V constant voltage.

Shades' outputs are daisy-chained, allowing adjacent groups of 2 or 3 channels to be mixed together.

This 2020 revision matches the design language used in the most popular and recent Mutable Instruments modules like Marbles, Plaits or Rings.

Useful in every patch.

Mix audio sources or CVs.

Add offsets to CVs, or change their polarity.

A companion for other modules.

Transpose the output of a sequencer without compromising V/O tracking.

Attenuate/invert CVs sent to modules which do not have attenuverters on their CV inputs.

Control with a knob parameters of other modules that are only accessible through CV inputs (like Just Friends' RUN or the Dixie's PW).

6HP
25mm
+12V:15mA
-12V:15mA

Specifications:

Input impedance: 100k.

All inputs DC-coupled.

Low-distortion audio op-amps and thin film 0.1% resistors improve transparency in audio mixing applications, and allow exact unitary gains for precision summing of pitch CV signals.

Stable and precise voltage reference, independent of power supply fluctuations.
Read more
MRP:$115.04 SAVE 23%
 More than 10 in stock $88.87
Serge Modular ÷N COM Divide By N Comparator Module
Cat: 757140 Rel: 15 Oct 20
 
Comparator module
Notes: The Serge Divide by N Comparator (NCOM) is a rare, much sought-after and very essential Serge module covering a number of functions: comparator, voltage-controlled pulse divider, and voltage-controlled staircase generator.

The #N COMPARATOR consists of two sections - a comparator (right side) and a voltage-controlled pulse divider (left side). The #N output of the pulse divider sends out a pulse on every N-th comparator pulse where N is a number from 1 to 31. N can be (pre-)set with the divider's control knob (1 #N) and can by changed with a control voltage. The VC knob (attenuator)on the bottom of the left side determines how much effect the control voltage has on "N". In addition, the divider generates a staircase waveform with N steps. This can be used to produce whole-tone steps when run into the 1V/Oct input of a VCO or as a stepped control voltage to change for instance the cutoff of a filter.

The comparator provides a number of useful "housekeeping functions": Logical decisions (if the +input is greater than the -input, the output will be high, otherwise low), Level detection (whenever a variable waveform crosses the theshold, a pulse is generated ), Pulse width modulation or Rectifying a waveform (e.g. a sine or triangle wave).
Read more
MRP:$266.28 SAVE 17%
 1 in stock $221.89
Click for better price!
or call +44 20 7424 1960
quote 757140
Serge Modular 8-Stage Sequencer & Programmer Module
Cat: 757144 Rel: 16 Oct 20
 
Sequencer & programmer module
Notes: The SEQ XL is a modern incarnation of Serge's analog sequencer / programmer. 8 stages. 2 rows of CV output. A - B (A minus B) outouts the difference between A and B (-5 to 5V range). The length of sequences can be set via the pushbuttons - while a sequence is running. RESET, UP/DOWN, HOLD inputs. Switch to start / stop the sequencer. PULSE STAGE SELECT inputs allow selecting specific stages. great at audio rates. ALL GATE output goes high when any button is pressed (or a stage is selected by a pulse input) and allows the use of the SEQ8 as a simple mini-keyboard.
Read more
MRP:$642.42 SAVE 17%
 1 in stock $535.34
Click for better price!
or call +44 20 7424 1960
quote 757144
Serge Modular 8-Stage Sequencer & Programmer Special Edition Module With 4U Pushbuttons
Cat: 757146 Rel: 15 Oct 20
 
Sequencer/programmer module
Notes: The SEQ XL is a modern incarnation of Serge's analog sequencer / programmer. 8 stages. 2 rows of CV output. A - B (A minus B) outouts the difference between A and B (-5 to 5V range). The length of sequences can be set via the pushbuttons - while a sequence is running. RESET, UP/DOWN, HOLD inputs. Switch to start / stop the sequencer. PULSE STAGE SELECT inputs allow selecting specific stages. great at audio rates. ALL GATE output goes high when any button is pressed (or a stage is selected by a pulse input) and allows the use of the SEQ8 as a simple mini-keyboard.
Read more
MRP:$726.44 SAVE 17%
 1 in stock $605.36
Click for better price!
or call +44 20 7424 1960
quote 757146
Serge Modular Active Pro & Noise & CV Pro Module
Cat: 757147 Rel: 15 Oct 20
 
Active processor/noise module
Notes: The Active Processor (ACPR) is an accurate, linear crossfader for either control voltages or audio signals. The new version designed by Serge in 2017 offers a widely increased precision. This module provides an important link in complex patches, allowing to smoothly change from one control voltage to another. It is possible to cross- fade between different envelopes, for example, or to gradually switch control over a bank of oscillators from one output of a sequencer to another output. The ACPR also offers interesting uses in the audio range, from wave- blending even to waveshaping (with CV in audio-range).

The Serge NOISE SOURCE (NOI) generates both white and pink noise waveforms. The S/H Source output pro- duces the necessary input for a sample and hold function to produce equi-probable random voltages, similar to a 1/F distribution function and is a perfect companion for the Smoothed & Stepped Generator (SSG).

The Precision CV-Processor (CV-PRO) is also a new development that goes beyond adding and inverting control voltages. A precision input stage allows mixing 1V/ Oct voltages, e.g. to cent-accurately transpose sequences (i.e. stay in tune). A switch transposes precisely one octave up or down. The attenuverting stage offers full processing control of level and polarity of three inputs voltages includ- ing Serge’s unique diode-based wave-compression. This new version now allows using the non-linear attenuverter mixing stage with precise 1V/Oct (AUX) inputs without los- ing their precision. IN 1 is normalled to 5V and therefore can be used to add an DC offset when no input signal is present.

The new version has been developed by Serge for and in close cooperation with Random*Source.
Read more
MRP:$475.68 SAVE 17%
 1 in stock $396.39
Click for better price!
or call +44 20 7424 1960
quote 757147
Serge Modular Dual Universal Slope Generator MK2 Module
Cat: 757123 Rel: 15 Oct 20
 
Dual universal slope generator module
Notes: The Serge Dual Universal Slope Generator (DSG) is probably the most versatile module of a Serge Modular system, incorporating a wide range of functions for both CV and audio. Some functions for which one Slope Generator can be used: VC Transient Envelope Generator, VC LFO, VC Portamento device, Envelope Follower (Detector), VC Pulse Delay (Monostable), Sub-Harmonic Series Generator (Divider), Audio Oscillator with variable waveform symmetry (saw to triangle), Non-Linear Audio Processor (low-fidelity VCF).

From the catalog: "The Universal Slope Generators are unity gain voltage followers with voltage controllable slopes. The range of control is exponential, extremely wide, and the Rise and Fall times can be controlled independently. The range of the Slope Generator is from sub-sonic to high audio frequency. Trigger inputs and trigger outputs allows each section of this dual module to function as a transient (envelope) generator, pulse delay, or in a "cycling mode" (to produce an LFO or clock). Since the Rise and Fall times are voltage controllable, this adds another dimension to the above functions.

The DSG mk2 version has been optimized for audio performance and speed/precision. The top section covers a frequency range up to more than 10kHz. It also offers improved tracking and some temperature compensation.
Read more
MRP:$531.26 SAVE 17%
 1 in stock $442.70
Click for better price!
or call +44 20 7424 1960
quote 757123
Serge Modular Resonant Equalizer Module
Cat: 757149 Rel: 15 Oct 20
 
Equalizer module
Notes: The RESONANT EQUALIZER (EQ) is a unique ten-band filter designed specifically for electronic sound synthesis and processing. Except for the top and bottom frequency bands, the bands are spaced at an interval of a major seventh. The Resonant Equalizer is designed to produce formant peaks and valleys similar to those in acoustic insstruments.

There are three equalized outputs: the two COMB outputs provide the sums of the two alternate filter bands, while the two top outputs are the (identical) mix of all filter bands. Please note that there is no sharp separation between the bands, moving any frequency knob will have an influence on both COMB outputs. This equalizer is special in that the bands can be set to be resonant: when the knobs are in the middle position, the response at the main EQ Output is flat. When the knobs are positioned between the 9 and 3 o'clock position, up to 12 db of boost or cut is set at the band. If the knob is set beyond the 3 o'clock position, the band will become resonant, simulating the natural resonance of acoustic instrument formant structures. Below the 9 o'clock position, increased band rejection is achieved.

The Random*Source version of the filter is a licensed and authorized adaption of the legendary Serge equalizer for Eurorack. It adds an input mixer with 2 inputs that can be built/used to attenuate or amplify/distort the input signal(s) before they are sent into the EQ and a Feedback section (knob and phase switch) which allows to feed back the output signal or the inverted output signal (depending on the Phase switch). Adding inverted feedback leads to phase cancellation effects - unlike the "normal" feedback, level decreases and the signal thins out.
Read more
MRP:$465.34 SAVE 17%
 1 in stock $387.77
Click for better price!
or call +44 20 7424 1960
quote 757149
Serge Modular Ring Modulator Module
Cat: 757142 Rel: 15 Oct 20
 
Ring modulator module
Notes: The 2017 RING is an improved version of the late Serge Ring Modulator (R9), designed by Serge himself for Random*Source in 2017, more than 40 years after the launch of the Serge Modular system. According to Serge, the RING is one of the most sophisticated modules in the Serge system. The new version has been developed by Serge for and in close cooperation with Random Source.
Read more
MRP:$336.08 SAVE 17%
 1 in stock $280.05
Click for better price!
or call +44 20 7424 1960
quote 757142
Serge Modular Smooth & Stepped Generator Module
Cat: 757124 Rel: 15 Oct 20
 
Multi-functional generator module
Notes: The Serge Smooth & Stepped Generator (SSG) is a complex multi-functional module which can be patch programmed to provide various slew and sample functions both for audio and CV signals. It is one of the essential Serge modules.

The Smooth section will place a positive and negative slew on input voltage transitions for lag effects, voltage controlled portamento and for low frequency filter applications. In Cycle-mode (cycle jack patched to the input), the Smooth side will oscillate yielding a voltage controlled triangle wave LFO. A high level into the HOLD input will enable the Smooth Function to be used as a track-and-hold circuit with voltage controlled slew rate.

The Stepped function can be used as a sample-and-hold with voltage controlled slew rate limiting. In Cycle mode, a pulse applied to the Sample input will generate complex staircase waveforms for control voltage applications and for use as audio signals.

The Coupler is an internal comparator which compares the output levels of the Smooth and the Stepped Generators. This output is useful for generating complex control voltages or random voltages.

The Random*Source version of the Smooth & Stepped Generator for Euro is a licensed and authorized adaption of the original Serge design that provides an increased audio range of the Smooth Generator and a bipolar ("hot") Coupler output in addition to the regular (unipolar) Coupler output.
Read more
MRP:$383.90 SAVE 17%
 1 in stock $319.91
Click for better price!
or call +44 20 7424 1960
quote 757124
Serge Modular Stereo Mixer Muses Edition Module
Cat: 757122 Rel: 15 Oct 20
 
Stereo mixer module
Notes: The Stereo-Mixer is a 2 input, 2 output equal-power panning mixer designed combine the sound of the famous Serge VCAs with the most audiophile parts available today in a special edition for Eurorack - NJR Muses op-amps and THAT2180 VCA chips. The module has 2 independent input channels (with attenuators) that can be Stereo panned between the 2 outputs. Each channel's gain is controlled by a gain knob and as Gain CV input (with attenuator) which allows to go into massive overdrive with a very organic sound. There are also two AUX inputs that allow signals to be routed in at unity gain. Both panning and Gain CV inputs have been designed to handle audio rates, making the Stereo Mixer a very powerful waveshaping and droning tool.

Beware that the module is able to deliver massive gain, resulting in output levels of up to appr. +/-11V when overdriven, so make sure your other equipment (AD converters, mixers) can handle this

Balanced Outputs, using "a new generation of monolithic audio differential line drivers offering improved performance over conventional crosscoupled designs" for low noise and distortion. These outputs can be connected to balanced or unbalanced equipment (amplifiers, A/D converters...)

NJR Muses op-amps in the audio path.

Optimized value set and easier calibration / setup.

Two Aux inputs can also be used to chain mixers. The output is available at a pair of banana jacks as well as (6.35mm / 1/4") TRS jacks (phone connectors) for connecting to external amplifiers, ADCs etc.
Read more
MRP:$502.82 SAVE 17%
 1 in stock $419.01
Click for better price!
or call +44 20 7424 1960
quote 757122
Serge Modular Triple+ Waveshaper Module
Cat: 757127 Rel: 15 Oct 20
 
Triple waveshaper module
Notes: The Triple Waveshaper (TWS) is a non-linear modifier which can transform a sawtooth wave into a sine wave. This classic module incorporates three independent waveshapers for modifying synthesizer waveforms or for processing signals from preamplified instruments. Although originally designed as a waveshaper for early Serge oscillators, this module has been found to be a excellent modifier of electronic and acoustic sounds, and is highly recommended for subtle timbral modifications beyond the range of simple oscillator/filter patches.

The R*S version extends the classic TWS concept:

+1: An additional (4th) waveshaper has been added (right after the first / bottom waveshaper) that can be dialed in smoothly using the +1 knob. Turned down (CCW) the bottom section acts as in the original (as if that additional waveshaper would not exist). Turned up (CW) the bottom section is actually 2 waveshapers in series.

Switches to link the 3 sections - bottom to top. Using these switches all sections can be set to act in series, starting at the bottom and ending at the top, providing the combined effect of 3 to 4 waveshapers (or anything in between) using the +1 knob.

Linking only the middle and top section and turning the +1 knob up (to have 2 sections in the bottom) allows you to use the module for isntance as two independent 2-stage waveshapers (using bottom in and out for one and middle in and top out for the other) - e.g. for stereo processing.
Read more
MRP:$328.32 SAVE 17%
 1 in stock $273.59
Click for better price!
or call +44 20 7424 1960
quote 757127
Serge Modular Variable Q VCF Module
Cat: 757125 Rel: 15 Oct 20
 
Variable resonance filter module
Notes: The Serge Extended Variable Resonance filter (VCFQ) is probably the most famous filter of the Serge system and one of the essential Serge modules. It is an excellent, extremely versatile general-purpose VCF that provides simultaneous low-pass, high-pass, band-pass and notch (band-reject) outputs combined with unique flexibility. Its trigger in, LOW mode and self osciallation allow a variety of uses from Oscillator to VC processing.
Read more
MRP:$363.22 SAVE 17%
 1 in stock $302.68
Click for better price!
or call +44 20 7424 1960
quote 757125
Serge Modular Variable Slope VCF Module
Cat: 793037 Rel: 15 Oct 20
 
VCF module
Notes: The Serge Extended Variable Slope filter (VCFS) is a unique filter of the Serge system, covering a wide range of sonic character. According to the 1983 Serge catalogue, the VARIABLE SLOPE VCF (VCFS) allows the amount of filtering to be dynamically controlled, from barely perceptible filtering to highly resonant, sharp cut-offs. With the variable slope control in the center position, the VCFS acts as a typical flat-response VCF, with high, low, and band~pass outputs available simultaneously. The slope of the cut-off is 12 db/octave. As the control is moved toward the maximum position, the resonance of the filter increases, so that the cut-off becomes sharper.



Read more
MRP:$363.22 SAVE 17%
 1 in stock $302.68
Click for better price!
or call +44 20 7424 1960
quote 793037
Serge Modular Wave Multipliers Module
Cat: 757126 Rel: 15 Oct 20
 
Wave multipliers module
Notes: The legendary Serge Wave Multipliers (VCM) are designed to dynamically add new harmonically-related overtones to an input waveform. Accroding to the 1982 catalogue, they alter the timbre in exciting new ways, producing interesting alternative forms of signal processing which are unique in the Serge Modular Music System. Since there are three entirely separate and different types of Wave Multipliers in this module, an enormously varied palette of new effects can be synthesized.

The top section offers two different modes, selected by a switch. In the HI position, the module functions to square-up an incoming signal, with a rounded flattening of the signal peaks, somewhat similar to overdriving a tube amplifier (with voltage control!). In LO mode, the module is a linear gain controlled VCA. This is useful for various functions such as amplitude modulation and for gating signals into the other sections.

The middle section generates a sweep of the odd harmonics (1, 3, 5, 7, 9, 11 and 13th) when a sine wave is applied to its input and the FOLD knob is turned up or a control voltage is swept from low to high. This effect is similar to overblowing a wind pipe closed at one end. A second input is included to allow two signals to be mixed before processing. This module can be used to explore timbral areas beyond the range of ring modulation.

The bottom Wave Multiplier performs non-linear wavehaping known as full-wave rectification, but with sophisticated level-compensating conditioning as well. The circuit uses three full-wave rectifier sections linked in a very refined controllable format. Sweeping the VC input over its range will produce a smooth timbral transition using the even harmonics (second, fourth, and eighth). Many other partials are present in this basic sound, however, and the sonorities are very rich and varied. The white output is a squared up version of the black one, resembling an harmonically enhanced pulse width modulation.

The Random*Source version of the Serge Wave Mulitpliers for Euro is a licensed and authorized adaption of the original Serge design, using best parts available today (e.g. Burr-Brown op-amps, C0G capacitors up to 220N) for optimum audio performance.
Read more
MRP:$370.98 SAVE 17%
 1 in stock $309.14
Click for better price!
or call +44 20 7424 1960
quote 757126
Tangible Waves AE Modular ALGODRONE Bytebeat Algorithms Module
Cat: 786475 Rel: 19 Oct 20
 
Algorithms module
Notes: Explore the world of bytebeat algorithms with ALGODRONE!

The ALGODRONE module is a sound source based on the so-called bytebeat algorithms. These are simple formulas, usually expressed as one line of program code, that spit out a wide variety of interesting tonal to rhythmical patterns, regardless of their simplicity.

The ALGODRONE module contains a number of these algorithms plus three parameter knobs that change values within the current algorithm. These changes vary from subtle to dramatic, even with small changes, depending on the algorithm and the setting of the other parameters.

Some algorithms create sound loops, to use these more flexible the ALGODRONE can work in a kind of "granular" mode where a smaller part of the entire loop is repeated and with the POSITION knob you can move through the entire output loop.

To maximize the variability, the parameter and "granular" values can be CV controlled too!

All in all a real kaleidoscope that will surprise you every time!
Read more
MRP:$99.53 SAVE 17%
 2 in stock $82.93
Click for better price!
or call +44 20 7424 1960
quote 786475
Tangible Waves AE Modular OR2x4 CV Generation & Manipulation Module
Cat: 786483 Rel: 19 Oct 20
 
CV generation & manipulation module
Notes: The OR2x4 module combines 2x4 inputs by logical OR rule; the input signals are usually trigger/gate signals and are treated as digital signals.

This can be used either for "mixing" gate/trigger signals from different sources or for audio signals. too.

There are two independent units with four inputs each. With a switch all eight inputs can be linked to an 8-input OR.

With the GATE inputs the signal can be controlled further; if GATE gets a "low" signal then the output is low also. By this, the output can be synced to a common clock signal and even if one of the inputs remains high the output changes. If the GATE input remains open, the module operates as a regular OR gate.
Read more
MRP:$31.02 SAVE 17%
 2 in stock $25.84
Tangible Waves AE Modular RACKLINK 2 x Module Kit (connect 2 AE cases using RACKLINK)
Cat: 719690 Rel: 19 Oct 20
 
2 x Eurorack modules + cable
Notes: Connect two AE cases with RACKLINK!

The RACKLINK is a module for connecting two AE cases; the kit contains of 2 identical modules and a connector cable (length 50 cm). The modules are placed in both cases and are connected by the cable.

By this, you get the following:

The second case is powered by the first one

All bus lines (CV, GATE, CONTROL, MIDI clock/start/stop) are connected to the second case

Additionally, there are 8 connections that can be freely used; so it is not necessary to have connections between two cases. E.g. the second rack can run a patch for a drone sound, the output is then sent via Racklink line 1 to the first rack and here patched to a mixer, via line 2 the second rack can receive a modulation signal from the first one. The lines are bi-directional!
Read more
MRP:$49.12 SAVE 17%
 1 in stock $40.92
Click for better price!
or call +44 20 7424 1960
quote 719690
Tiptop Audio Fold Processor Wave Multiplier & Sub-Octave Generator Module (black faceplate)
Cat: 794940 Rel: 21 Oct 20
 
waveshaper / frequency divider synth module
Notes: The Fold Processor is a voltage-controlled wave multiplier and sub-octave generator. The circuit is based on a classic diode design that adds odd harmonics by folding the incoming signal, followed by subdivided square waves.

The wave folder creates new waveforms from standard sine, triangle, sawtooth, and square waves and includes a CV input with an attenuator, making it very easy to create beautifully animated folding sounds. Adjustable voltage-controlled Inject alters the bias point creating an even wider palette of sounds.

The subdivide generator squares the fold output generating 4 more sounds spaced one octave apart, each with its own gain knob and mixed to the Subdivide output jack. Mixing the four can create anything from discordant square wave swarms to sweet harmonic oscillator stacks, from a stable square version of the folded wave to freaky PLL-like glitched slides.

Overall results can sound evil at times and sweet at others, a true multi-faced devil.

Size: 12HP
Depth: 31mm
Power: +12V 60ma / -12V 55ma
Read more
MRP:$183.55 SAVE 17%
 3 in stock $152.95
Click for better price!
or call +44 20 7424 1960
quote 794940
Items 1 to 31 of 31 on page 1 of 1

Filter

Synth modules
商品
Release Date
Featured
Close