安全购物

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

安全购物

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Synth modules

首页  Equipment  

Synth modules

Options
Items 1 to 50 of 71 on page 1 of 2
1  2  »
Subscribe to our weekly Studio Equipment emails
AION Modular 904B Voltage Controlled High Pass Filter Module
Cat: 780159 Rel: 18 Nov 20
 
filter module
Notes: Premium sound quality from this premium module, based on the classic Moog high-pass filter. Steep 24dB/oct filter curve with precise CV-controlled cutoff frequency tracking over a 12-octave span.

Supplier's Notes:
The AION Modular 904B High Pass filter is an Eurorack clone of the classic Moog Modular High Pass filter.
The 904B High Pass Filter attenuates frequencies below the Fixed Control Voltage(cutoff frequency) point at a rate of 24dB per octave.

The cutoff frequency is voltage controlled through the three control inputs at the bottom of the module (1v per octave).

The Fixed Controlled Voltage knob adjustes frequency over 12 octaves span (1v per octave).

The Frequency Range switch:
LOW- 4Hz to 20kHz
HIGH- 10Hz to 50kHz

Specifications:
Power: +12 60mA, -12 50mA
Depth: 40mm
Doepfer compatible.

60 mA +12V
50 mA -12V
0 mA 5V
Read more
MRP:$337.98 SAVE 20%
 1 in stock $271.63
Click for better price!
or call +44 20 7424 1960
quote 780159
Analogue Systems RS-650N Echo & Reverb Module
Cat: 799757 Rel: 13 Nov 20
 
Echo & reverb synth module
Notes: The RS-650 Echo / Reverb is a combination of the RS-310 and RS-440 which are based on the same circuit.

It offers both delay (echo) and reverb settings in one module. It is based on a bucket brigade device (BBD) with six parallel delay taps. Those six delay times have no relationship to each other and their outputs have different levels. You have to consider the reverb effect as a mixture of six different short delays what results in a dense sound. The clock frequency which scans the bucket brigade is audible and you'll have to use a low pass filter in order to eliminate or minimize it. In Reverb mode the delay time can be set between 2.5ms and 150ms and in Echo mode it spans from 75ms to 200ms.

All modules by Analogue Systems come ready to use with five years warranty mounted in the by the customer preferred rack or cabinet.

Depth: 65mm
HP : 12
Read more
MRP:$333.98 SAVE 17%
 1 in stock $278.31
Click for better price!
or call +44 20 7424 1960
quote 799757
Befaco/Rebel Technology Lich Programmable Multi-Function Module
Cat: 799077 Rel: 20 Nov 20
 
Function generator synth module
Notes: Lich is a programmable multi-function module based in Rebel Technology OWL platform. This is a Befaco Rebel collaboration that brings back Owl’s platform with this new hardware iteration. It has stereo in and out, four pot controls summed to cv inputs (like the classic Owl module) And as addition, CV and Gate outputs, patch selection with display and USB MIDI host and device connections.

FEATURES
Stereo Audio IN and OUT at 48k 24 bits.
4 CV controls (Pot + Attenuated CV in)
2 CV outputs.
2 Gate intputs + buttons.
1 Gate Output.
Patch selection and visialization via display.
USB host and Device connections

SPECS
Current needs: +12V: 130mA, -12V: 30mA
Width: 12 HP
Depth: 26 mm (including power connector)
Aluminium, heat-treated front panel.
Designed, kits prepared and completed modules assembled in Barcelona.
Read more
MRP:$426.15 SAVE 24%
 7 in stock $325.06
Click for better price!
or call +44 20 7424 1960
quote 799077
Blue Lantern Modules Phobos Lunar VCF MK2 Module
Cat: 775775 Rel: 16 Nov 20
 
VCF module
Notes: This module contains about 5 modules in one. You get a lot of features. This is using a Phase Lock Loop based internal patch to create the oscillation (LFO). I then give you access to the clock divider used in the Phase Lock process. Think of this module as a 'phase lock loop for dummies'. Just play and forget kind of module. No menu diving or complicated stuff to remember.

This LFO can go audio rate or really slow using the toggle switch to decide LFO/HFO mode. There is an internal CV switch for you to select from 6 wave forms. The special wave form is the step generated wave. It sounds like a quantized ramp wave, and moves at half the overall internal lfo rate. There is a nice Level out knob to control the LFO wave output. This LFO has very HARD sync, that will reset the lfo.

The other half of this module contains a clock divider that also uses a CV selectable output. The clock divider can also go audio rate and sound like a sub harmonic generator when in audio rate. At very high frequencies (FREQ knob fully clockwise), the clock divider will lock up, this is due to the cmos chip, this is normal.

The clock divider can be used with internal clock or external clock.

This is a fun performance type of lfo with just about all the features an LFO should have. There is 1v/ octave tracking of about 4 octaves when used as an oscillator. This product is for most part more of an LFO. The best patch one can do with this product is a 'cross' patch from the Phobos Lunar LFO, and have it patched to your Oscillator module. Then patch your oscillator to the CV waveform select on the Phobos. Hear what your oscillator sounds like, it will blow your sound pallete.

Width: 12hp

Current: +80mA,-50mA
Read more
MRP:$252.49 SAVE 21%
 1 in stock $199.28
Click for better price!
or call +44 20 7424 1960
quote 775775
Doepfer A-118-2V Noise & Random Slim Line Vintage Edition Module
Cat: 790467 Rel: 10 Nov 20
 
Signal generator module
Notes: Module A-118-2 generates the signals white noise, colored noise, continuous random voltage and stepped random voltage.

The noise signal is generated 100% analog by amplification of the noise of a transistor. White and colored noise are usually used as audio sources. The random voltages are normally used as control voltages (e.g. for filter frequency or any other voltage controlled parameter).

The A-118-2 gives you the ability to mix the relative amounts of Red and Blue noise (low/high frequency component) in the colored noise output.

For the continuous random voltage the rate of change (Rate) and amplitude (Level) of the random voltage can be adjusted. The continuous random voltage is used as source for the S&H/T&H unit. The type of operation can be set to S&H (sample and hold) or T&H (track and hold). When T&H is chosen the output signal follows the input signal as long as the Clock input is "high". As soon as the clock signal changes to "low" the last voltage is stored. When S&H is chosen the input signal is sampled at the rising edge of the Clock signal. For the Clock signal a "digital" signal (e.g. Clock, Gate, rectangle output of an LFO) is required. Dual color LEDs are used to indicates the continuous and stepped random voltages.

Controls:
Blue: share of the high frequencies in the the colored noise output
Red: share of the low frequencies in the the colored noise output
Rate: rate of change of the continuous random voltage
Level: amplitude of the continuous random voltage
TH/SH: switches between T&H und S&H

Inputs and outputs:
RND: continuous random voltage output (with LED display)
TH/SH: stepped random voltage output (with LED display)
Clk: Clock input of the S&H/T&H unit
C Noise: colored noise output
W Noise: white noise output

Important notes:
After power on it takes a few minutes until the two noise signals and the random signals are generated. The module is not faulty when after power on the signals do not appear immediately!

The S&H/T&H function is realized by pure analog circuitry (electronic switch followed by a holding capacitor and buffer). Consequently the output voltage drifts a bit in the holding state because the capacitor is discharged by parasitic resistors. The drift depends also upon environmental conditions like humidity or temperature.

The level of the random voltage changes with the settings of the Blue and Red controls. Especially the Red control affects the random voltage level (which is derived by low pass filtering from the colored noise signal) because the Red control changes the share of the low frequencies in the colored noise signal. The effect of the Blue control is much smaller because it changes the share of the high frequencies in the colored noise signal which are filtered out by the low pass of the random circuitry.

Power consumption: 20mA at +12V and 20mA at -12V
Depth: 40mm
HP : 4
Read more
MRP:$109.54 SAVE 14%
 2 in stock $94.62
Click for better price!
or call +44 20 7424 1960
quote 790467
Endorphin.es Cockpit 2 Four Stereo Channels Performance Mixer Module (black faceplate)
Cat: 799787 Rel: 13 Nov 20
 
4-channel performance mixer module
Notes: Endorphin.es Cockpit² is a 4-channel stereo mixer with side-chain ducking.

Key facts:

Increased headroom
Improved sound quality
the LEDs are blue/red instead of red/green (Daltonic friendly)
No TRRS jacks anymore
New knobs on the black module version
Power consumption: 75mA at +12 V and 40mA at -12 V

Depth: 33mm

HP : 6
Read more
MRP:$227.10 SAVE 17%
 1 in stock $189.24
Click for better price!
or call +44 20 7424 1960
quote 799787
Endorphin.es Cockpit 2 Four Stereo Channels Performance Mixer Module (yellow faceplate)
Cat: 799781 Rel: 13 Nov 20
 
Performance mixer module with 4 stereo channels
Notes: Endorphin.es Cockpit² is a 4-channel stereo mixer with side-chain ducking.

Key facts:
Increased headroom
Improved sound quality
the LEDs are blue/red instead of red/green (Daltonic friendly)
No TRRS jacks anymore
New knobs on the black module version

Power consumption: 75mA at +12 V and 40mA at -12 V
Depth: 33mm
HP : 6
Read more
MRP:$227.10 SAVE 17%
 1 in stock $189.24
Click for better price!
or call +44 20 7424 1960
quote 799781
Frequency Central Boom!! Analogue Drum Voice Module
Cat: 800468 Rel: 13 Nov 20
 
Analogue drum voice module
Notes: Boom!! is an analogue drum voice with a broad range of applications.

The heart of the module is a VCO which is built around one half of a LM13700. The VCO has a HIGH/LOW switch as well as a SWEEP control, which defines it's response to the onboard envelope.

The other half of the LM13700 has been carefully crafted into a release envelope generator, which has a FAST/SLOW switch in addition to a RELEASE control. As a bonus, the input of the envelope is velocity sensitive, allowing for a dynamic response.

Additionally, there is an envelope output, which can be used to drive external modules.

Boom!! can be used to create bass drums, tom toms, chirps, blips and clicks. Check it out now.

Depth: 35mm

Width: 4HP

12V draw: 10mA

-12V draw: 9mA

5V draw: 0mA
Read more
MRP:$160.31 SAVE 23%
 1 in stock $123.56
Click for better price!
or call +44 20 7424 1960
quote 800468
Frequency Central Reset Simulation Boolean Logic Module
Cat: 796770 Rel: 05 Nov 20
 
Boolean logic module
Notes: Reset Simulation is a Boolean logic module with two inputs, A and B, and 8 simultaneous outputs, NOT A, NOT B, AND, NAND, OR, NOR, XOR and XNOR. Each of the 8 outputs go high when their respective truth tables are satisfied by the A and B inputs. Legend has it that if the user can make all LEDs light up at the same time, the current simulation that we are living in will be replaced with another, slightly different simulation. Another legend has it that this has already happened multiple times. A further legend refutes both previous legends as the ramblings of a madman.

Product Specifications
Depth: 35mm
Width: 6HP
12V draw: 11mA
-12V draw: 7mA
5V draw: 0mA
Read more
MRP:$179.01 SAVE 16%
 1 in stock $149.62
Click for better price!
or call +44 20 7424 1960
quote 796770
Frequency Central Turn! Turn! Fixed Voltage Sources Module
Cat: 800470 Rel: 13 Nov 20
 
Fixed voltage sources module
Notes: Fixed voltage source with BIG KNOBS and multiple voltage ranges.

Fixed voltage sources are not a new idea in modular, but we hope that Turn! Turn! brings a new twist to the concept. Turn! Turn! features two independent fixed voltage sources with a useful range of features.

Turn! Turn! grew out of a conversation with Steve Levine - when a producer of such note makes a suggestion you have to listen - and act on it. Steve suggested that it would be useful to have a fixed voltage source under the control of a big knob, and the ability to go from as little as 1V over the entire range of the knob. Hence subtle, incremental changes are possible.

The final feature set includes a voltage selection switch as well as a unipolar/bipolar switch. Both normal and inverted outputs are included. The following ranges are available from Turn! Turn! depending on switch positions:
0V to 1V
0V to 2.5V
0V to 5V
-1V to 1V
-2.5V to 2.5V
-5V to 5V

Depth: 29mm

Width: 8HP

12V draw: 9mA

-12V draw: 9mA

5V draw: 0mA
Read more
MRP:$160.31 SAVE 23%
 1 in stock $123.56
Click for better price!
or call +44 20 7424 1960
quote 800470
Happy Nerding FM AID Through-Zero Linear Frequency Modulator Module (silver)
Cat: 795454 Rel: 11 Nov 20
 
Frequency modulator module
Notes: Clever FM module that does digital-style through-zero FM using analogue circuits. Use any signals from other modules as your carrier and modulator, then phase modulate or wavefold in the FM Aid.

Supplier's Notes:
FM AID is a module designed to perform through-zero linear Frequency Modulation (FM) in the analog modular world. Any arbitrary signals can be used as a Carrier and Modulator. The module copies FM in how it is done in digital implementation, but in a completely analog circuit free of digital aliasing artifacts. Digital or software FM oscillators are mainly based on a ramp waveform which is then shaped to other waveforms. This is also represented in the FM AID module: sawtooth signal is expected on the Carrier input to give the indicated sine, triangle, sawtooth and square waveforms on the respective outputs. However the user is not limited to only use sawtooth for the Carrier and any other signal can be plugged giving many complex waveforms at the outputs.

All known FM tricks from digital implementation are also applied - you can endlessly experiment with the Carrier/Modulator frequency ratios, Modulation index (FM knob), Modulator's amplitude shaping (CV knob), feedback FM (output is fed back to the Modulator's input) and many other.
Carrier input has normalled connection to the Modulator's input. This internal routing is disconnected each time a plug is inserted in the Modulator's input. That is a handy option which allows the module to be used with only one signal source - this single signal will act as Carrier and Modulator at the same time. There won't be any frequency differences between Carrier and Modulator in this case, but many interesting wave folding sounds will be available anyway.

Technically speaking FM AID uses Phase Modulation, not Frequency Modulation. The sonic difference is that the produces sound is brighter.

SPECIFICATIONS

Carrier input level: -5V ... + 5V (can also accept inputs ranging from -1V ... +1V] to [-12V ...+12V] / [-15V ...+15V] using onboard trimmer)

Modulator input level: preferably -5V ... + 5V

CV input level: preferably -5V ... + 5V

outputs level: -5V ... + 5V

outputs impedance: 1 kOhm

module depth: 3 cm or 1,5 inches

power consumption: +45 /-45 mA at +/-12 Vdc, +50 /-50 mA at +/-15 Vdc
Read more
MRP:$193.71 SAVE 28%
 8 in stock $139.16
Click for better price!
or call +44 20 7424 1960
quote 795454
Happy Nerding MMM VCF Moog Multi Mode Voltage Controlled Filter Module (black faceplate)
Cat: 799335 Rel: 11 Nov 20
 
Voltage controlled filter module
Notes: MMM VCMMM VCFF (M**g Multi Mode Voltage Controlled Filter) is a dual VCF having common controls for both parts. Thus it can be used as a stereo filter, or patched with different combinations of the available inputs/outputs. And all this functionality is packed in the compact 8 hp wide module.

MMM VCF has the famous transistor ladder core introduced by Bob Moog, but also features the added Band Pass and Low Pass modes, not available in the original design. Those extra modes are greatly widen the possible spectral modification of the input sound.

The module was carefully designed to have vanishingly small noise and bleed.

SPECIFICATIONS

FREQ: 20 Hz - 22 kHz - manual frequency range

RES: 35 Hz - 22 kHz - self oscillation range

FM: 0 - 7,5 V will modulate the whole hearing range at max settings

LP: 24 db/oct Low Pass output

BP: 12 db/oct Band Pass output

HP: 12 db/oct High Pass output

outputs impedance: 1 kOhm

module depth: 4 cm

width: 8 HP

power consumption: +42 mA / -40 mA at +/-12 Vdc
Read more
MRP:$228.44 SAVE 18%
 2 in stock $188.13
Click for better price!
or call +44 20 7424 1960
quote 799335
Hungry Robot Output Module Desktop Module
Cat: 780994 Rel: 23 Nov 20
 
Output module
Notes: The Hungry Robot Output Module allows users to interface your modular system with headphones, speakers, and recording interfaces. It uses a high quality amplifier circuit to boost the signal to the level you need. It accepts both mono and stereo signals. Plug in you inputs and output however you need, internal switching will automatically route the signal to where it needs to be based on what you have plugged in. As with all Hungry Robot "Modular Boxes" the Output Module can be powered with a simple 9V DC, Negative Center power supply.

KNOB
-VOLUME: Controls the overall volume of the output. Adjust to taste.

PATCH POINTS
-IN(L/MONO): Left input. Use this if you are running mono and want it split into stereo.
-IN(R): Right Input
-OUT(L/STEREO): Left output. Use this for stereo situations (TRS/Headphones)
-OUT(R): Right Output

Dimensions: 4.7" x 2.6" x 1.5"
Power: 9V DC - Negative Center - 2.1mm Barrel
Read more
MRP:$125.57 SAVE 17%
 2 in stock $104.64
Click for better price!
or call +44 20 7424 1960
quote 780994
IO Instruments EUPORIE Four Pole Low Pass VCF Module With Moog & Sallen & Key Resonance
Cat: 795933 Rel: 10 Nov 20
 
VCF/filter synth module
Notes: Four Pole LOWPASS VCF with Moog and Sallen&Key Resonance

Powerful Sound from sweet to overdriven with lot of character

Simultan 24dB, 12dB & 6 dB Filter Outs

12dB State Variable Highpass Input Switch (150Hz)

Linear Resonance Distortion and Input Gain Stage

Make up Gain (Bass Boost) for Moog Style Resonance

Linear FM Input for audio Rate modulation and resonance CV IN

Keytracking In with 1V/Oct and Attenuator

Two exponential INs with Attenuators and CV THRU Outs

Width: 12 HP
Read more
MRP:$187.03 SAVE 34%
 2 in stock $123.57
IO Instruments HIMALIA Quad Noise Generator Module
Cat: 795932 Rel: 10 Nov 20
 
Flexible noise generator module
Notes: PENTA SOUND SOURCE

ANALOG NOISE from RED, WHITE to BLUE NOISE

DIGITAL NOISE with RATE and S/H OUT

SQUARE WAVE from DIGITAL NOISE

32 TRANSIENT SAMPLES with 8bit mode for craziness

SAMPLEs with 16 RATCHED variations and wide TUNE range

6 VOICE SQUARE WAVE mix with wide TUNE range

32 combinations for CHORDS, DRONES and UNISON sounds

Analog Mixing and Filtering for SQUARE mix OUT

7 CV INs and 1 GATE IN

Width: 16 HP
Read more
MRP:$231.11 SAVE 34%
 2 in stock $151.40
IO Instruments PASIPHAE Experimental Ring Modulator Module
Cat: 795930 Rel: 10 Nov 20
 
Ring modulator synth module
Notes: Experimental RING MODULATOR

Low distortion, low noise, high headroom

Low X & Y feedthrough

Structure allows access to every input

Wide range of sounds (tremolo, metallic, waveshape)

AC coupled X input Attenuator

DC coupled X input Attenuator

DC OFFSET for DC, coupled X IN and Y IN

Mute CV & switch for DC INs with LED indicator

Positive OUT and negative OUT

Width: 12 HP
Read more
MRP:$187.03 SAVE 34%
 1 in stock $123.57
IO Instruments SINOPE Dual High End VCA Module
Cat: 795918 Rel: 10 Nov 20
 
attenuator/VCA synth module
Notes: Two channel VCA with discrete core

Extra VCA for linear and exponential CV

Low noise, low feedthrough, low clicking

Very low distortion and gain of 2

Sweet and detailed sound, huge headroom

Wide dynamic range and high bandwidth

Normalized CV INs to the nominal value

3 ATTENUATORs for each channel

LEDs show the optimal range

VCA openness adjusting

Flexible structure to work with AUDIO & CV

Width: 16 HP
Read more
MRP:$227.10 SAVE 33%
 1 in stock $152.52
IO Instruments THEMISTO High Precision VCO Module
Cat: 795682 Rel: 10 Nov 20
 
LFO/oscillator synth module
Notes: Amazing value oscillator from this new German brand. Precise, rich analogue tones with sub-oscillator output, sine wave options and linear FM. Hard to beat for the money.

Supplier's Notes:
High precision VCO with wide frequency range

Clean waves without edge aberrations

PW from 0%-100% with fast edges for rich sound

Low distortion SINE wave

SUB OSC with rich sound and phase inversion

RESET/SYNC function with external GATE

Buffered V/OCT & GATE thru

Simultaneous linear & exponential FM

LFO mode

Width: 12 HP
Read more
MRP:$212.41 SAVE 33%
 5 in stock $141.38
MGR Synthesizer 3320 LPF 24dB Resonant Low Pass Compact Filter Module
Cat: 798347 Rel: 25 Nov 20
 
Low pass compact filter module
Notes: The MRG 3320 LPF is a low pass voltage controlled filter based on the AS3320 (clone of the CEM3320).

This is a compact, but powerful and high quality 24dB 4 poles resonant low pass filter.

It is a clean, low noise filter, but can reach some screamy qualities when resonance is turned to the maximum.

All parameters are both voltage and knob controlled.

The panel is a 1.6mm FR4 PCB, matte black.

Lead-free PCBs, components and solder.

Technical Details:
Width: 4HP (2cm).
Depth: 4cm (can be used in skiffs).

Audio Signals
INPUT: Input Audio Signal.
OUTPUT: Output Filtered Signal.

Control Signals
CUTOFF: CV for filter cutoff modulation.
PEAK: CV for filter peak modulation.

Controls
C: Cutoff base frequency.
P: Peak base amount.

CM: Attenuator for the CUTOFF input.
PM: Attenuator for the PEAK input.
Read more
MRP:$100.19 SAVE 17%
 2 in stock $83.48
Modbap Modular Per4mer Quad Performance Effects Eurorack Module
Modbap Modular Per4mer Quad Performance Effects Eurorack Module (effect/delay/digital/quad/reverb/dual & stereo/dynamics/sampling synth module)
Cat: 795892 Rel: 23 Nov 20
 
Quad performance effects module
Notes: Per4mer is a 14hp eurorack formatted quad performance effects unit. Inspired by time-honored DJ effects processing boxes, Per4mer allows for a hands-on and CV / Gate controlled eurorack effects performance interaction. Whether momentarily engaging or latching FX, Per4mer offers an unrivaled and fun experience.

The basic principle of Per4mer is to feed in an audio input and to trigger on-the-fly effects, bringing DJ style live improvisation to a modular environment. Effects can be triggered simultaneously or individually where an inspiring effect palette combines to generate unique creative beats and melodies.

Per4mer includes 4 performance effects (Delay, Reverb, Glitch, Tape Stop) and 2 processing effects (Color processor & Compressor). Each of the 4 performance effects has its own set of 4 parameters controlled by the 4 knobs or CV inputs. Effects can be used simultaneously or individually allowing for a vast variety of creative effects combinations.

The Color processor allows for engaging any of the 4 coloration presets - Classic (12bit), LoFi (8 Bit), Saturation, and Wax. Combine any one of these color presets with the onboard Compressor and Side-Chain input to instantly transform any audio signal's mood and vibe.

Engaging the Reverb along with the "12-bit classic" color option gives an incredibly lush lo-fi reverb sound while disengaging the color option allows the reverb to remain just as beautifully lush and hi-fi. The potential is nearly limitless.

Per4mer's 'Glitch' effect is inspired by classic beat repeat and looper effects offering 4 controls - Wet/Dry (sound on sound), Loop size, Pitch, and reverse. Conversely, the Tape Stop effect allows for the perfect punctuation of any audio signal.

Width: 14HP
Depth: 25mm
Power: +12V: 50mA, -12V: 0mA
Read more
MRP:$478.25 SAVE 17%
 1 in stock $398.54
Click for better price!
or call +44 20 7424 1960
quote 795892
MRG ADSR Compact Envelope Generator Module
MRG ADSR Compact Envelope Generator Module (envelope generator synth module)
Cat: 798361 Rel: 25 Nov 20
 
Compact ADSR envelope generator module
Notes: Simple, compact envelope generator at a nice price. Capable of ultra-fast envelopes as well as long, slow slopes with attack up to five seconds and decay/release up to eight seconds each.

Supplier's Notes:
This is a classic envelope generator, based on AS3310, a clone of the CEM3310. Features a separate trigger input, normal and inverse envelope output, high quality components and careful engineering.

When the TRIGGER input is unconnected, rising and falling edges of the GATE input will trigger a classic ADSR envelope.

If the TRIGGER input is connected, a high GATE level will bring the output to SUSTAIN level, and the GATE falling edge will start the release phase. A TRIGGER input when GATE is high will start an attack/decay cycle. Attack, Decay and Release times vary exponentially with the control knob. For each of these parameters, the ratio between the longest possible time and the shortest is slightly more than 3000:1.

The panel is a 1.6mm FR4 PCB, matte black.

Lead-free PCBs, components and solder.

This is the second version of the MRG ADSR. The previous one is sold out. Although the module has been completely redesigned, the only visible change from the previous module is the knob orientation.

Technical details
Width: 4HP (2cm).
Depth: 4cm (can be used in skiffs).

Attack time range: 1.75msec to 5s.
Decay time range: 2.4msec to 8s.
Release time range: 2.4msec to 8s.

Attack level: 5 V
Sustain level:0 to 5V
Inverse envelope: 0 to -5V
Read more
 4 in stock $83.48
Click for better price!
or call +44 20 7424 1960
quote 798361
MRG Synthesizer 3340 VCO Precision Compact VCO Module
Cat: 798345 Rel: 25 Nov 20
 
Precision compavtr VCO synth module
Notes: The MRG 3340 VCO is an oscillator based on the AS3340 (clone of the CEM3340).

Quality components, polypropylene timing capacitor, and precise tuning make this a small, simple, but high quality oscillator.

1V/Oct CV stable over more than 6 octaves, precise waves, PWM and SYNC input.

Output waves are square and sawtooth.

When no PWM input is present, the square wave has a duty cycle of 50% - this is actually configurable by an internal trimmer.

The panel is a 1.6mm FR4 PCB, matte black.

11 mA +12V
13 mA -12V
0 mA 5V
40 mm deep

Technical Details:
Width: 4HP (2cm).
Depth: 4cm (can be used in skiffs).

Frequency range: 16Hz-24kHz
Sawtooth output: +5V/-5V
Square output: +5/-5V

Inputs
CV: 1V/Oct CV input.
MOD: Exponential FM input.
SYNC: Hard Sync.
PWM: Pulse-Width Modulation Input.

Controls
M: Attenuator for the MOD input.
C: Coarse base frequency.
F: Fine base frequency.

Outputs
SAW OUT: Sawtooth output.
SQUARE OUT: Square/Pulse output.
Read more
MRP:$100.19 SAVE 17%
 2 in stock $83.48
MRG Synthesizer 3360 VCA Dual Linear Compact VCA Module
Cat: 798351 Rel: 25 Nov 20
 
Dual linear compact VCA module
Notes: This is a Dual Linear Low Noise VCA module, based on the AS3360.

Both VCAs can be controlled by a CV entry, modulated by control knob.

VCA1 also has an initial gain control (B1), that offsets the CV input by a constant value. This allows VCA1 to be left always open, with the initial gain controlling the amplification.

If both input jacks are used (IN1, IN2), the two VCAs will operate independently. The output of VCA1 will go to OUT1, the output of VCA2 will go to OUT2.

If there's no jack in IN2, the two VCAs will be cascaded, and the output of VCA1 will go both to OUT1 and as an input to VCA2.

This allows this module to be used to process both the MIDI Velocity and the envelope of an audio signal.

Inputs:

IN1: Input Signal for VCA1.
CV1: Control Voltage for VCA1's amplification.
IN2: Input Signal for VCA2. If no IN2 is present, the input of VCA2 will be the output of VCA1.
CV2: Control Voltage for VCA2's amplification.
Outputs:

OUT1: Output of VCA1
OUT2: Output of VCA2
Controls:

M1: Attenuator for CV1
B1: Initial gain of VCA1
M2: Attuenator for CV2

40 mm deep
Read more
MRP:$100.19 SAVE 17%
 2 in stock $83.48
MRG Synthesizer ATT Compact Passive Triple Attenuator Module
Cat: 798358 Rel: 25 Nov 20
 
Passive triple attenuator synth module
Notes: Triple Passive Attenuator Module for Eurorack Modular Synthesizers.

This is a simple module that allows to attenuate three signals independently.

A simple but very useful modules that it's always handy to have in a rack.

It is passive, thus requires no external power.
Read more
MRP:$42.75 SAVE 17%
 4 in stock $35.62
MRG Synthesizer MULTI Compact Passive Multiple 4x2 or 2x4 Module
Cat: 798355 Rel: 25 Nov 20
 
Compact passive synth module
Notes: This is a simple module that allows to duplicate signals. Each column can be used either as a dual 1x2 multiple, or as a 1x4 multiplier, depending on the presence of a jack in slots 3 and 4.

Really simple, but incredibly useful.

This module is passive, i.e. requires no external power.
Read more
MRP:$33.40 SAVE 17%
 4 in stock $27.83
NANO Modules ALT Quad Voltage Controlled Amplifier & Cascaded Mixer Module
Cat: 796163 Rel: 20 Nov 20
 
synth module
Notes: 4 VCAs in 8HP designed to keep your signals clean and colourless

VCAs 1, 2, 3. Each one is equipped with a GAIN control, and a CV IN Attenuverter.

VCA 4. GAIN CV IN and the signal normalled to +5V (fully open VCA).

Additionally, the outputs of these channels are cascaded from left to right, allowing ALT to behave as a four-channel mixer.
Read more
MRP:$203.06 SAVE 22%
 1 in stock $158.08
NANO Modules FONT Massive Sounding Liquid Filter Module
Cat: 796875 Rel: 20 Nov 20
 
Voltage-controlled filter/sine oscillator module
Notes: FONT is a massive sounding liquid filter- designed to bring you powerful basslines, tons of FM modulation and a clean resonance over your audio path.

It features two simultaneous outputs:
2-pole Low Pass
2-pole Band Pass

It can also work as a sine oscillator, tracking 1V/OCT when the resonance is at its maximum level.

FONT can be used to make basslines, acid patterns thanks to its organic and musically sounding resonance.

Ping it to produce percussion sounds such as, bongos, congas or toms.

Applying a pitch envelope, it really shines as a kick-drum machine!

22 mA +12V
25 mA -12V
0 mA 5V
15 mm deep
O 4.60 (10 Votes) Average Rating
Read more
MRP:$200.39 SAVE 31%
 1 in stock $138.04
Click for better price!
or call +44 20 7424 1960
quote 796875
NANO Modules MAR Multichannel Dual Mixer Module
Cat: 796881 Rel: 20 Nov 20
 
Multichannel dual mixer module
Notes: MAR is a multichannel dual mixer module for the modular synthesizer. Both mixers are capable of mixing audio, CV and gate signals because they are DC coupled. MAR has two independent 4-channels mixers:

Mixer X: Is a four channel mixer with gain control for each channel. The potentiometers use logarithmic tape to have a good control with audio signals. This mixer features two outputs, the mixer output and its inverted. The output level is shown in the LED.

Mixer Y: Is a four channel mixer with gain control for the sum of the Y channels. If no jack is connected to the input Y1, the output of the Mixer X is normalled to Mixer Y. The potentiometer use logarithmic tape to have a good control with audio signals. This mixer features one output, the sum of the 4 channels. The output level is shown in the LED.

This Mixer can work as two 4-1 Mixer, or 7-1 Mixer with global gain control.

INPUTS:
4 Mixer X inputs.
4 Mixer Y inputs.

OUTPUTS:
Mixer X output.
Inverted Mixer X output.
Mixer Y output.
Mixer X + Mixer Y output.

FAST SPECS:
Dual mixer module for the modular synthesizer - Eurorack.
8 HP - 15mm Depth - Skiff friendly.
Both mixers are capable of mixing audio, CV and gate signals.
Mixer X: 4-channel mixer with gain control for each channel.
Mixer Y: 4-channel mixer with gain control for the sum of the channels.
If no cable connected to Mixer Y input 1, the output of the Mixer X is normalled to Mixer Y.
Can work as two 4-channel mixers, or one 7-channel mixer.
The output level is shown in the LEDs.
Read more
MRP:$220.42 SAVE 37%
 1 in stock $138.04
Noise Engineering Fractio Solum Clock Divider & Multiplier Module (silver faceplate)
Cat: 801247 Rel: 24 Nov 20
 
Clock divider & multiplier synth module
Notes: Fractio Solum is a simple and easy-to-use clock divider/multiplier. Patch a clock in, dial in a fraction, and you're off! CV over ratio opens up an extra level of clocking and sequencing power. FS is loaded with features, including a reset input to keep you on the 1, x2 and /2 outs that further divide and multiply the selected ratio for even more variation, a mute feature for breaks and drops, and a BOC output that sends a trigger each time the division starts a cycle. Flip the mode switch to use FS as a divider/multiplier, to use the more common rhythms based on 2 and 3, or go wild with any division between 1/10 and 10/1.

Size and power:

4 HP

+12v: 50mA

-12v: 14mA

+5v: 0mA

Fractio -- from latin: "fraction"

Solum -- from latin: "foundation"

"Foundation of fractions"
Read more
MRP:$179.01
 1 in stock $164.76
Click for better price!
or call +44 20 7424 1960
quote 801247
Noise Engineering Quantus Pax Four-Channel Transposable Precision Adder Module (silver faceplate)
Cat: 800309 Rel: 11 Nov 20
 
Four-channel transposable precision adder module
Notes: Quantus Pax is a four-channel precision adder, buffered multiple, and polyphonic transposition utility. Each channel has two CV inputs and can be further modified by the three Xpose inputs. QP is made with high quality low-tolerance resistors for unbeatable accuracy. Patch-wide key changes, polyphonic movement, mathematically derived melodies, and more are all to be had with this simple but useful utility.

Size and power:
6 HP

+12v: 85ma

-12v: 85ma

+5v: 0ma
Read more
MRP:$267.18 SAVE 13%
 2 in stock $231.55
Click for better price!
or call +44 20 7424 1960
quote 800309
Radikal Technologies Delta CEP A Semi-Modular Paraphonic Synthesiser Module
Cat: 796113 Rel: 16 Nov 20
 
Synth module
Notes: A semimodular synthesizer consists of 9 essential synthesis modules whose combination provides a very powerful and straight forward starting point into the world of Eurorack synthesizers. Let's see, which modules are included in Radikal's latest brainchild: The system includes one swarm oscillator, a mixing stage with a noise source, a very powerful filtering section around the analog multimode filter plus stereo digital emulations of 12dB multimode and 24 dB ladder filters and one VCA. One LFO and one snappy envelope generator for modulation purposes plus the secret weapon of all Radikal Technologies digital modules, the SNAPSHOT INTERPOLATOR are adding extra excitement to your sonic adventures. The icing on the cake of the sound engine is a digital FX section with incredible modulated stereo delay effects including tape delay, phasing, chorus, flanging etc.!

In a modular synth system, the different sound generating and altering sections are not connected. The user has to establish all the connections that are necessary to generate sound effects and tones with patch cables. In a semimodular synth the most essential connections are hardwired. This means you can play the DELTA CEP A right out of the box. Of course you can go a step further and add your own module patching.

The DELTA CEP A has a MIDI interface, which is essential when you want to use the paraphonic mode of the Synth. The paraphonic mode let's you play chords and turns the DELTA into the perfect pad and ensemble section. The MIDI Interface has additional outputs for external modules and a special digital bus allows for controlling the SWARM OSCILLATOR RT-311 direct with notes and chords to layer additional voices in monophonic and chords mode using an external MIDI keyboard.

The SNAPSHOT INTERPOLATOR is a very unique feature in the synthesizer world. First you have the ability to store snapshots of your sound creations into the internal memory. Then you can play these snapshots sequentially for very cool sonic sequences. But that is not all. You can even create smooth transitions from one snapshot to the other for stunning sound morphing effects. Independent from the Interpolator, the snapshot memories can also be used as preset memories and are filled with sounds from our sound designers.

23 knobs, 14 buttons, 28 RGB LEDs, 14 outputs and 17 inputs - the DELTA CEP A has a great synthesis potential that can even grow by adding additional modules. The connectivity provides the freedom to use it as part of your existing Eurorack system or as an independent solo synthesizer with our special DELTA CEP A desktop case.
Read more
MRP:$1,078.07 SAVE 20%
 2 in stock $861.64
Radikal Technologies RT-311 Swarm Oscillator Module
Cat: 796106 Rel: 16 Nov 20
 
Swarm oscillator module
Notes: The RT-311 can store up to 8 memory setups with 8 snapshots each, holding all oscillator settings and memorizes them even after powering down your modular synth. One highlight of this module is the opportunity to interpolate between these parameter snaphots. Interpolation can be controlled with an external control voltage or with a built in LFO. The speed of the internal LFO can be controlled with an external control voltage as well. The interpolator has even an external output to interpolate one parameter of an attached module. Both oscillators can built swarms of oscillator clones. Up to 16 Oscillators are running simultaneously at the highest setting. The detune knob changes the pitch of all oscillator clones between ultra slow oscillator frequency beating effects and multiple frequency drones and chords. The swarm can be pitched in musical intervals, chords, clusters or fat detunes. The swarm tuning can be stored into the snapshots too. That allows for to built up to 8 different chords with different sound settings one can change while playing in a setup.

Both oscillator swarms have independent outputs. If one sets the exponential FM inputs depth to maximum, the inputs run with Volt per Octave scaling. The oscillator swarms can then be used like two independent Synth voices. The scale inputs can also get quantized to musical scales. That makes it easy to control the swarm from a step sequencer. Just select the root key with the tune knob and a pentatonic scale and turn the knobs of your sequencer for always matching tonal sequences.

Electrical and mechanical Specifications:

250 mA +12V
40 mA -12V
0 mA 5V
30 mm Depth
32 HP
Read more
MRP:$854.98 SAVE 32%
 2 in stock $578.89
Rossum Electro-Music Mob Of Emus Polyfunctional Harmonic Sextet Module
Cat: 797062 Rel: 25 Nov 20
 
Polyfunctional harmonic sextet module
Notes: A lot to unpack here. Six-channel multipurpose oscillator/noise source/modulation generator with quantisation, trigger generators and even more. Seriously powerful all-round digital goodness.

Supplier's Notes:
Mob of Emus is a powerful music and sound design tool that packs an enormous amount of creative power into an amazingly compact 16HP module.

Mob of Emus gives you six channels of oscillators, noise sources, cyclical and 1-shot modulators (including LFOs, envelopes, and various other shapes), sample and hold waveshapes, slow random modulators, triggers, rhythm patterns, and quantization (of both internal and external signals) in pretty much any combination (well, any combination of six channels, anyway).

In addition to being able to independently program the function of each individual channel, Mob of Emus' Hex Mode provides a macro control layer that allows you to control all of its channels simultaneously (while maintaining the relationships of each channel's independent programming).

What's more, Mob of Emus' "harmonic" control structure makes it extremely easy to combine its oscillators into rich additive timbres, to combine its LFOs into stacked harmonic low frequency modulation waves, and to create modulation sources and triggers with intricate polyrhythmic patterns.

With an external trigger input, six CV inputs that can operate in six different control modes, six independent outputs, and an assignable mix output, Mob of Emus can operate as the heart of an almost unlimited variety of patches. And its 8 real-time controls will give you immediate hands-on access to a channel's (or all six channels') key parameters, inviting (and rewarding) exploration and improvisation.

Mob of Emus features include:

Six channels that can function independently or can be further controlled by a Hex Mode macro layer that lets you control all six simultaneously. Channels can be:
Wide-range digital oscillators
Noise sources
Cyclical and 1-shot modulators (including LFOs, envelopes, and various other shapes)
Sample and hold waveshapes
Slow random modulators
Triggers
Rhythm patterns
Quantizers (of both internal and external(!) signals)
Six CV inputs that can function in six different control modes
Eight real-time controls for immediate access to key channel parameters
Six individual channel outputs and an assignable mix output
The ability to store and recall 12 user presets
And much more.

Mob of Emus is 16HP wide and 25mm deep.

Power requirements (max): 130mA +12V, 25mA -12V. Reverse polarity protected.
Read more
MRP:$480.92 SAVE 15%
 5 in stock $409.68
Click for better price!
or call +44 20 7424 1960
quote 797062
Studio Electronics Boomstar Modular VCA2 Module
Cat: 655873 Rel: 12 Nov 20
 
Dual VCA module in Eurorack format - 6HP
Notes: Two quality VCAs for audio or CV with level control - advantageous for creating a CV modulation chain: Patch the 1st (controlling) modulator into the CV input, and the 2nd and 3rd (the controlled) modulators into inputs A and B; the output can then be patched to a modulation destination such as an oscillator or filter frequency. The same approach is effective for enveloping an LFO, or dynamically modulating an LFO or envelope with key velocity, modwheel, key tracking, etc. One can even escape the highly coloured Mini-flavoured character of our AMP with this quad op-amp alternative for cleaner, sharper tonality in the near final stages of synthesis.

Originally set at unity gain (along with the MIX4), now units with a January 16 (2016) and greater marking will exceed unity and clip the op-amp, past 3:00 on the dial. Upshot: Fully clockwise the gain is doubled. Distortion of audio and modulation signals never hurt anyone, and add another tool to the box.

Note: In the audio realm clipping may occur sooner dependent up signal input level.

Two Pots:
LEVEL 1, LEVEL 2

Eight Patch Points:
CV 1, IN 1A, IN 1B, OUT 1; CV 2, IN 2A, IN 2B, OUT 2

Common Controls and Patch Points:
LEVEL - Level/Mix adjustment
CV - Controlling CV modulation input
IN A - Controlled Input 1A
IN B - Controlled Input 1B
OUT - Output

- Size: 6hp
- Depth: 25mm with ribbon cable attached
- Power Usage: 5mA, 4mA (+12 / -12)
Read more
 1 in stock $110.21
Click for better price!
or call +44 20 7424 1960
quote 655873
Wavefonix 1847 Wavetable Oscillator Module
Cat: 796480 Rel: 16 Nov 20
 
Wavteable oscillator module
Notes: The 1847 Wavetable Oscillator (VCDO) is a versatile and easy-to-use voltage-controlled 8-bit wavetable oscillator.

The main oscillator has 16 waveforms arranged as a wavetable and a sub-oscillator also provides 8 waveforms; each selectable at one of four octaves (+1, unison, -1 or -2). The main and sub-oscillator wavetables can be cycled through manually using knobs on the front panel, or can each be controlled by a CV source. The main oscillator waveform select CV has its own dedicated attenuator.

Two FM CV inputs are also provided (FM 1 has an attenuator), along with a 1V/octave input (quantized to semitones).

Coarse and fine frequency controls are provided. The overall frequency range of the oscillator is ten octaves i.e. 8.18Hz to 8,372Hz (MIDI note 0 to 120).

Other features include a bitcrush effect; allowing the sample resolution of the output to be varied between 1-bit and 8-bit. This is controllable via a knob on the front panel and a separate CV input.

Controllable glide allows portamento to be introduced when the oscillator is controlled by a keyboard.

Specifications:

Format: Eurorack
Width: 14hp
Depth: approx. 45mm
Power consumption:
+12V: 40mA
-12V: 30mA
+5V: 0mA
Read more
 1 in stock $244.91
Click for better price!
or call +44 20 7424 1960
quote 796480
Wavefonix 2144 Low Pass Filter Module
Cat: 796491 Rel: 16 Nov 20
 
Low pass filter module
Notes: The 2144 Low-Pass Filter (LPF) features the SSI2144 IC, which is based on the legendary SSM2044 filter architecture used in many classic synthesizers.

With its unmistakably silky-smooth top-end and liquid-like mid-range; it is widely regarded as being one of the best sounding filters ever made.

A wide range of modulation possibilities also adds versatility.

Specifications

Format: Eurorack
Width: 10hp
Depth: approx. 40mm
Power consumption:
+12V: 30mA
-12V: 30mA
+5V: 0mA
Read more
 1 in stock $146.94
Click for better price!
or call +44 20 7424 1960
quote 796491
Wavefonix 3 Channel Audio Mixer Module
Cat: 796510 Rel: 16 Nov 20
 
Audio mixer module
Notes: This mixer has three AC-coupled channels, each with a logarithmic unity-gain attenuator; suitable for mixing audio signals from modules such as VCOs etc.

Specifications

Format: Eurorack
Width: 8hp
Depth: approx. 25mm
+12V: 20mA
-12V: 20mA
+5V: 0mA
Read more
 1 in stock $90.16
Click for better price!
or call +44 20 7424 1960
quote 796510
Wavefonix 3 Channel Linear Mixer Module
Cat: 796506 Rel: 16 Nov 20
 
Linear mixer module
Notes: This mixer has three DC-coupled inputs, making it perfect for mixing both audio or CV signals from sources such as VCOs, LFOs and envelopes etc.

Each channel features a unity-gain, linear attenuator.

Specifications

Format: Eurorack
Width: 8hp
Depth: approx. 25mm
Power consumption:
+12V: 10mA
-12V: 10mA
+5V: 0mA
Read more
 1 in stock $81.26
Click for better price!
or call +44 20 7424 1960
quote 796506
Wavefonix 3310 Envelope Generator Module
Wavefonix 3310 Envelope Generator Module (envelope generator synth module)
Cat: 796493 Rel: 16 Nov 20
 
Envelope generator module
Notes: Featuring the AS3310 IC (based on the classic CEM3310 IC), the 3310 Envelope Generator (EG) offers a simple, but effective four-stage design; ideal for modulating VCAs, filters and other modules.

Specifications

Format: Eurorack
Width: 9hp
Depth: approx. 40mm
+12V: 40mA
-12V: 30mA
+5V: 0mA
Read more
 1 in stock $122.45
Click for better price!
or call +44 20 7424 1960
quote 796493
Wavefonix 3320 High Pass Filter Module
Cat: 796489 Rel: 16 Nov 20
 
High-pass filter module
Notes: The 3320 High-Pass Filter (HPF) is a four-pole 24dB/octave design that uses the AS3320 IC (based on the classic CEM3320).

It is the perfect partner to go along side either Wavefonix's 3320 Low-Pass Filter (LPF) or 2144 Low-Pass Filter (LPF), to produce a band-pass filter.

On it's own however, it shines when used on percussion or drums, along with a wide range of other applications.

Specifications

Format: Eurorack
Width: 10hp
Depth: approx. 40mm
Power consumption:
+12V: 30mA
-12V: 60mA
+5V: 0mA
Read more
 1 in stock $146.94
Click for better price!
or call +44 20 7424 1960
quote 796489
Wavefonix 3320 Low Pass Filter Module
Cat: 796485 Rel: 16 Nov 20
 
Low -pass filter module
Notes: The 3320 Low-Pass Filter (LPF) is a four-pole, 24dB/octave filter, utilising the AS3320 IC (based on the highly regarded CEM3320) and offers a fully-featured take on a classic design.

Specifications

Format: Eurorack
Width: 10hp
Depth: approx. 40mm
Power consumption:
+12V: 30mA
-12V: 60mA
+5V: 0mA
Read more
 1 in stock $146.94
Click for better price!
or call +44 20 7424 1960
quote 796485
Wavefonix 3340 Low-Frequency Oscillator Module
Cat: 796483 Rel: 16 Nov 20
 
Low-frequency oscillator module
Notes: Wavefonix's 3340 Low-Frequency Oscillator (LFO) utilises the original CEM3340 (Rev. G) architecture, similarly to the 3340 VCO.

It is a voltage-controlled LFO featuring three simultaneous, buffered 10Vpp (i5V) waveforms including DC-coupled ramp, triangle and pulse outputs.

The pulse output has a controllable PW, along with a PWM CV input (i5V range). The PW can be varied manually between 50% and 100% duty cycle with the PW knob on the front panel. When a PWM CV source is input, the PW is normalled to 50% and the CV level is attenuated using the PW knob.

Other features include a controllable FM input that is also calibrated to 1V/octave when the FM knob is fully-clockwise. So the LFO can also be used as a limited VCO. A comparator-based reversing type sync input also allows the LFO to be synced to another LFO or VCO etc.

The overall frequency range of the LFO is approximately 0.03Hz to 4.5kHz. Coarse and fine frequency knobs provide a maximum frequency adjustment range of approximately 0.03Hz to 1kHZ (this range is adjustable using a trimmer on the PCB).

Specifications

Format: Eurorack
Width: 10hp
Depth: approx. 40mm
Power consumption:
+12V: 60mA
-12V: 40mA
+5V: 0mA
Read more
 1 in stock $146.94
Click for better price!
or call +44 20 7424 1960
quote 796483
Wavefonix 3340 Voltage Controlled Oscillator Module
Cat: 796464 Rel: 16 Nov 20
 
Voltage controlled oscillator module
Notes: British newcomers Wavefonix serve up this feature-rich oscillator based on the CEM3340 chip as used in classic VCO designs from the likes of Roland, Oberheim and Sequential Circuits.

Supplier's Notes:
Featuring the legendary CEM3340 IC, the 3340 Voltage-Controlled Oscillator (VCO) module offers that classic, rich analog sound found in many famous synthesizers from the past, along with a wide range of sound shaping and modulation possibilities.

Specifications

Format: Eurorack
Width: 13hp
Depth: approx. 40mm
Power consumption:
+12V: 60mA
-12V: 50mA
+5V: 0mA
Read more
 1 in stock $195.92
Click for better price!
or call +44 20 7424 1960
quote 796464
Wavefonix 3360 Dual Exponential VCA Module
Cat: 796503 Rel: 16 Nov 20
 
VCA module
Notes: Featuring the AS3360 IC (based on the classic CEM3360 IC), this module features two exponential response Voltage-Controlled Amplifiers (VCAs); suitable for mainly audio signals. However, it can still be used with CV signals.

It would also be the ideal match with a modulation source such as an linear envelope generator.

Specifications

Format: Eurorack
Width: 8hp
Depth: approx. 40mm
Power consumption:
+12V: 30mA
-12V: 30mA
+5V: 0mA
Read more
 1 in stock $111.32
Click for better price!
or call +44 20 7424 1960
quote 796503
Wavefonix 3360 Dual Linear VCA Module
Wavefonix 3360 Dual Linear VCA Module (amplifier synth module)
Cat: 796499 Rel: 16 Nov 20
 
Dual linear VCA module
Notes: Featuring the AS3360 IC (based on the classic CEM3360 IC), this module features two linear response Voltage-Controlled Amplifiers (VCAs); suitable for both audio and CV signals.

It would also be the ideal match with a modulation source such as an exponential envelope generator.

Specifications

Format: Eurorack
Width: 8hp
Depth: approx. 40mm
Power consumption:
+12V: 30mA
-12V: 30mA
+5V: 0mA
Read more
 1 in stock $111.32
Click for better price!
or call +44 20 7424 1960
quote 796499
Wavefonix 3360 Linear VCA Module
Wavefonix 3360 Linear VCA Module (amplifier synth module)
Cat: 796495 Rel: 16 Nov 20
 
Linear VCA module
Notes: Featuring the AS3360 IC (based on the classic CEM3360 IC), this linear response VCA (Voltage Controlled Amplifier) is suitable for both audio and CV signals.

It would also be the ideal match with a modulation source such as an exponential envelope generator.

Specifications

Format: Eurorack
Width: 8hp
Depth: approx. 25mm
Power consumption:
+12V: 30mA
-12V: 30mA
+5V: 0mA
Read more
 1 in stock $105.75
Click for better price!
or call +44 20 7424 1960
quote 796495
Wavefonix 3x3 Passive Multiple Module
Wavefonix 3x3 Passive Multiple Module (utility / passive synth module)
Cat: 796531 Rel: 16 Nov 20
 
Passive multiple module
Notes: This module is a triple, three-way passive multiple in a compact but ergonomic design; useful for splitting CV signals from modules such as LFOs or envelopes etc.

Being passive; no power is required for the module to function.

Specifications

Format: Eurorack
Width: 4hp
Depth: approx. 15mm
+12V: 0mA
-12V: 0mA
+5V: 0mA
Read more
 1 in stock $57.88
Click for better price!
or call +44 20 7424 1960
quote 796531
Wavefonix 4x4 Buffered Multiple Module
Cat: 796527 Rel: 16 Nov 20
 
Buffered multiple module
Notes: This module is a premium, buffered version of our passive 4x4 multiple, featuring four groups of buffered multiples; each group having one input and three outputs.

Buffered multiples are useful for multiplying pitch sensitive CV signals, such as 1V/octave CVs from a keyboard or MIDI to CV converter, although they can also be used for multiplying CV signals from other sources, such as LFOs etc.

Passive multiples are not particularly suitable for use with pitch sensitive CVs, as they often result in a loss of tuning. Buffered multiples ensure that any loss in pitch is negligible.

Specifications

Format: Eurorack
Width: 7hp
Depth: approx. 40mm
Power consumption:
+12V: 40mA
-12V: 60mA
+5V: 0mA
Read more
 1 in stock $122.45
Click for better price!
or call +44 20 7424 1960
quote 796527
Wavefonix 4x4 Passive Multiple Module
Wavefonix 4x4 Passive Multiple Module (utility / passive synth module)
Cat: 796529 Rel: 16 Nov 20
 
Passive multiple module
Notes: This module is a quad, four-way passive multiple, suitable for splitting CV signals from modules such as LFOs or envelopes etc.

The passive design means that no power is required for the module to function.

Specifications

Format: Eurorack
Width: 7hp
Depth: approx. 15mm
+12V: 0mA
-12V: 0mA
+5V: 0mA
Read more
 1 in stock $73.46
Click for better price!
or call +44 20 7424 1960
quote 796529
Wavefonix 6 Channel Audio Mixer Module
Cat: 796515 Rel: 16 Nov 20
 
Audio mixer module
Notes: This mixer has six AC-coupled channels, each with a logarithmic unity-gain attenuator; suitable for mixing audio signals from modules such as VCOs etc.

Specifications

Format: Eurorack
Width: 12hp
Depth: approx. 25mm
Power consumption:
+12V: 20mA
-12V: 20mA
+5V: 0mA
Read more
 1 in stock $122.45
Click for better price!
or call +44 20 7424 1960
quote 796515
Items 1 to 50 of 71 on page 1 of 2
1  2  »

Filter

Synth modules
商品
Release Date
Featured
Close