安全购物

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

安全购物

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Synth modules

首页  Equipment  

Synth modules

Options
Items 1 to 50 of 107 on page 1 of 3
1  2  3  »
Subscribe to our weekly Studio Equipment emails
2hp Pmkn Mult Signal Splitter Module (limited edition module)
2hp
Cat: 797074 Rel: 26 Oct 20
 
2-input/6-output signal splitter module
Notes: The Limited Edition Pumpkin Mult is here! Craft sonic concoctions with this pulp-free multiplier, exclusive for a limited time.

Mult is a 2 input, 6 output signal splitter. Channel 1 is normalled to channel 2 when no cable is present, allowing the user to split an input signal six ways, or two input signals with three outputs each.

Read more
 2 in stock $37.69
4MS Percussion Interface & Expander Modules
Cat: 794765 Rel: 30 Oct 20
 
Envelope follower/envelope generator/external/expander synth module
Notes: Nice dual-module gate/envelope generator which can run off any audio signal. Feed it drums, synths, samples or a mic input and and generate CV modulation signals.

Supplier's Notes:
The Percussion Interface (PI) and PI Expander are a pair of Eurorack modules that generate gates and envelopes from acoustic drums, samplers, drum machines, and virtually any audio source.

Converting microphone, instrument, line and modular signals into CV and clock/gate signals, the PI and PI Expander are suited for synchronizing sequencers or other modules to the rhythm of an audio track or live percussion. The modules can simultaneously be used as a pre-amp for microphones or line-level signals, while generating inverted envelopes useful for side-chaining. The PI module contains all the core functionality and can be used without the Expander to conserve space. The Expander requires the main PI modules and adds three gain stage options, a modular-level audio output jack, a 1/4" (6.35mm) input jack, and envelope attenuation capabilities. The two modules are only sold together, they are not available separately.

Electrical and Mechanical Specifications:
Module size (PI):
4 HP Eurorack formal module
0.98" (25mm) maximum depth with power cable
10-pin Eurorack power header

Module size (PI EXP):
4 HP Eurorack formal module
0.98" (25mm) maximum depth with power cable
8-pin cable connects to PI

Power consumption:
with PI Expander
+12V: 104mA
-12V: 65mA
without PI Expander
+12V: 69mA
-12V: 56mA

Audio Inputs:
1/8" [3.5mm] on PI main module, and 1/4" [6.35mm] on PI Expander
100k input impedance, AC-coupled

Audio Outputs:
Voltage range: -10.4V to +10.8V, DC-coupled
1k output impedance
Gain Characteristics
Gain range: < -100dB to +54dB (500x)
Clip light turns blue when signal (post-gain) exceeds 2.5Vpp
Gate is triggered when signal (post-gain) exceeds 6.3Vpp
Clip light flashes red when signal clips on Audio Out jack (exceeds +10.8V)
Gate Out Jack
1k output impedance
+8V gate/trigger signal
6ms - 0.5s pulse width
+ Env Out jack (jack on PI main module)
1k output impedance
+9V peak (sustain), -60mV resting (off)
15ms attack time
70ms - 6s exponential decay time (1% of peak voltage)
- Env Out Jack (jack on PI main module)
1k output impedance
+9V resting (off), -150mV peak (sustain)
15ms attack time
70ms - 6s exponential decay time (1% of peak voltage)
Env. Out jack (attenuated jack on PI Expander)
1k to 26k variable output impedance
+9V maximum
-60mV minimum
Inv. Out jack (attenuated jack on PI Expander)
1k to 26k variable output impedance
+9V maximum
-150mV minimum
Included with the PI+EXP:
8-to-16 pin power cable
8-to-8 pin cable for connecting to the Expander
M3 Knurlie screws (4)
Read more
MRP:$200.89 SAVE 21%
 7 in stock $159.65
Click for better price!
or call +44 20 7424 1960
quote 794765
AION Modular 904B Voltage Controlled High Pass Filter Module
Cat: 780159 Rel: 18 Nov 20
 
filter module
Notes: Premium sound quality from this premium module, based on the classic Moog high-pass filter. Steep 24dB/oct filter curve with precise CV-controlled cutoff frequency tracking over a 12-octave span.

Supplier's Notes:
The AION Modular 904B High Pass filter is an Eurorack clone of the classic Moog Modular High Pass filter.
The 904B High Pass Filter attenuates frequencies below the Fixed Control Voltage(cutoff frequency) point at a rate of 24dB per octave.

The cutoff frequency is voltage controlled through the three control inputs at the bottom of the module (1v per octave).

The Fixed Controlled Voltage knob adjustes frequency over 12 octaves span (1v per octave).

The Frequency Range switch:
LOW- 4Hz to 20kHz
HIGH- 10Hz to 50kHz

Specifications:
Power: +12 60mA, -12 50mA
Depth: 40mm
Doepfer compatible.

60 mA +12V
50 mA -12V
0 mA 5V
Read more
MRP:$336.59 SAVE 20%
 1 in stock $270.51
Click for better price!
or call +44 20 7424 1960
quote 780159
ALM Pip Slope Mk2 Compact Envelope Generator Module
ALM Pip Slope Mk2 Compact Envelope Generator Module (envelope generator / function generator / LFO synth module)
Cat: 792489 Rel: 21 Sep 20
 
envelope generator module
Notes: The ‘Pip Slope’ (rev II) is a compact envelope and function generator. It supports both Attack/Decay and Attack/Sustain/Decay type envelopes with both direct and voltage control of Attack and Decay times. Envelope shapes can be morphed between exponential, linear and logarithmic type slopes. Envelopes can be made to loop, repeating infinitely or decreasing with time or amplitude for echo and bouncing ball type effects. An ‘End of Cycle’ trigger output further extends the envelopes functionality for both clocking and burst or fill type effects.

The improved Pip Slope adds a number of new features and updates over the original Pip whilst keeping the same size. Improvements include increased output resolution, finer control of fast envelopes, a new morphing shape control, switchable 5v or 8v maximum envelope level, additional loop modes and an additional trigger output.

Features:
Compact envelope and function generator in 4HP.
Trigger and gate inputs.
Voltage and direct control of attack and release times.
Snappy or super long envelope times – ranging approx 1ms to 7 minutes per stage.
Optional self looping ability with 3 different loop modes: Decreasing amplitude, decreasing time, and regular loop.
Shape control that morphs the envelope shape from logarithmic to linear to exponential curves.
End of Slope trigger output that fires a trigger at the end the envelope or loop cycle.
Selectable 5v or 8v max envelope level output.
Reverse polarity protection.
Skiff friendly.
Designed and Made in the UK.

Technical Specifications
Supply: +12V 30mA / -12V 10mA
Size: 4HP
Depth: 38mm
Read more
 More than 10 in stock $108.65
Click for better price!
or call +44 20 7424 1960
quote 792489
Analogue Systems RS-650N Echo & Reverb Module
Cat: 799757 Rel: 13 Nov 20
 
Echo & reverb synth module
Notes: The RS-650 Echo / Reverb is a combination of the RS-310 and RS-440 which are based on the same circuit.

It offers both delay (echo) and reverb settings in one module. It is based on a bucket brigade device (BBD) with six parallel delay taps. Those six delay times have no relationship to each other and their outputs have different levels. You have to consider the reverb effect as a mixture of six different short delays what results in a dense sound. The clock frequency which scans the bucket brigade is audible and you'll have to use a low pass filter in order to eliminate or minimize it. In Reverb mode the delay time can be set between 2.5ms and 150ms and in Echo mode it spans from 75ms to 200ms.

All modules by Analogue Systems come ready to use with five years warranty mounted in the by the customer preferred rack or cabinet.

Depth: 65mm
HP : 12
Read more
MRP:$332.60 SAVE 17%
 1 in stock $277.16
Click for better price!
or call +44 20 7424 1960
quote 799757
Befaco/Rebel Technology Lich Programmable Multi-Function Module
Cat: 799077 Rel: 20 Nov 20
 
Function generator synth module
Notes: Lich is a programmable multi-function module based in Rebel Technology OWL platform. This is a Befaco Rebel collaboration that brings back Owl’s platform with this new hardware iteration. It has stereo in and out, four pot controls summed to cv inputs (like the classic Owl module) And as addition, CV and Gate outputs, patch selection with display and USB MIDI host and device connections.

FEATURES
Stereo Audio IN and OUT at 48k 24 bits.
4 CV controls (Pot + Attenuated CV in)
2 CV outputs.
2 Gate intputs + buttons.
1 Gate Output.
Patch selection and visialization via display.
USB host and Device connections

SPECS
Current needs: +12V: 130mA, -12V: 30mA
Width: 12 HP
Depth: 26 mm (including power connector)
Aluminium, heat-treated front panel.
Designed, kits prepared and completed modules assembled in Barcelona.
Read more
MRP:$424.40 SAVE 22%
 6 in stock $330.38
Click for better price!
or call +44 20 7424 1960
quote 799077
Behringer 121 Dual VCF Module
Cat: 772865 Rel: 19 Oct 20
 
dual VCF module
Notes: Another module inspired by Roland's System 100, the 121 dual VCF offers tons of filtering options for very little money thanks to a pair of matching low-pass filters with built-in mixers and high-pass options.

Supplier's Notes:
This is the Behringer SYSTEM 100 121 DUAL VCF Module. An authentic reproduction of the original System 100M circuitry from the 80s that can fit in a standard Eurorack case, at a very affordable price. Mix the 121 DUAL VCF in with your existing rig or start your modular synth journey from here.

The 121 DUAL VCF features 3 CV inputs and 3-channel mixers per VCF; allowing you to independently mix all input signals. All of these inputs have their own attenuators to provide you more control over each signal that goes into the module.

Each VCF has its own output accompanied by a resonance slider that boosts resonance frequencies and a cutoff control to adjust the cutoff frequency of the lowpass filter. The 121 DUAL VCF also features a 3-mode Fixed HPF switch where you can select between Off, 1 (1 kHz), 2 (2 kHz) or 3 (5 kHz). Combine this with the resonance and cutoff sliders to create intricate and interesting patches.

Installing the 121 DUAL VCF is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the 121 DUAL VCF to be mixed with other synth modules for a truly unique set up.
Read more
 More than 10 in stock $104.21
Click for better price!
or call +44 20 7424 1960
quote 772865
Behringer 173 Quad Gate/Multiples Module
Cat: 772876 Rel: 19 Oct 20
 
quad gate & multiples module
Notes: This is the Behringer SYSTEM 100 173 QUAD GATE/MULTIPLES. An authentic reproduction of the original System 100M circuitry from the 80s that can fit in a standard Eurorack case. The best part? It's at a very affordable price. Mix the 173 QUAD GATE/MULTIPLES in with your existing rig to expand its capabilities and you're sure to have a lot of fun.

The SYSTEM 100 173 QUAD GATE/MULTIPLES Module features 4 signal gates (switches) with buffered audio inputs and outputs for immediate signal switching. This provides users the option to choose between a control gate operation, non-inverting (active high) input or an inverting (active low) input.

6-channel multiples, each with 4 floating parallel connectors, are available for optimal signal integrity. You can now send out your signal to other modules to help you create more intricate patches and deliver more compelling sounds from one source.

Installing the SYSTEM 100 173 QUAD GATE/MULTIPLES is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the SYSTEM 100 173 QUAD GATE/MULTIPLES to be mixed with other synth modules for a truly unique set up.
Read more
 3 in stock $84.25
Click for better price!
or call +44 20 7424 1960
quote 772876
Behringer 903A Random Signal Generator Module
Cat: 772802 Rel: 19 Oct 20
 
signal generator
Notes: Enter the Behringer 903A RANDOM SIGNAL GENERATOR Module, a vintage-sounding noise generator from the '70s. An authentic reproduction of the circuitry from the "Modular 55" series used by the world's most famous pop, rock and jazz musicians. Now, musicians can build their very own, unique, synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match specific modules to create your personal, unique synth to complement the music you play or go all out and fill a room, from floor to ceiling, with modules that'll fulfill any synth geek's wildest dream.

Enter the Behringer 903A RANDOM SIGNAL GENERATOR Module, a vintage-sounding noise generator from the '70s. An authentic reproduction of the circuitry from the Modular 55 series used by the world's most famous pop, rock and jazz musicians. Now, musicians can build their very own, unique, synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match specific modules to create your personal, unique synth to complement the music you play or go all out and fill a room, from floor to ceiling, with modules that'll fulfill any synth geek's wildest dream.

The 903A RANDOM SIGNAL GENERATOR generates both white and pink noise via two 3.5 mm outputs each allowing you to send different signals to other modules in your rig.

Installing the 903A RANDOM SIGNAL GENERATOR is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the 903A RANDOM SIGNAL GENERATOR to be mixed with other synth modules for a truly unique set up.

Read more
 9 in stock $46.55
Behringer 904B VC High Pass Filter Module
Cat: 772804 Rel: 19 Oct 20
 
filter module
Notes: Enter the Behringer 904B VOTLAGE CONTROLLED HIGH PASS FILTER Module. A vintage-sounding authentic reproduction of the circuitry from the Modular 55 & 35 Series used by the world's most famous pop, rock and jazz musicians for their shows. Now, musicians can build their very own, unique, synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match specific modules to create your personal, unique synth to complement the music you play or go all out and fill a room, from floor to ceiling, with modules that'll fulfill any synth geek's wildest dream.

The 904B VOLTAGE CONTROLLED HIGH PASS FILTER allows you to attenuate low frequencies and accentuate higher ones in a signal. With the Fixed Control Voltage knob, also known as a cutoff frequency, determines the frequencies attenuated below a certain point. Switch the Frequency Range between Low (4 Hz to 20 kHz) or High (10Hz to 50 kHz) to select what frequencies the Fixed Control Voltage affects. You can use the 904B to let you cut through a mix for some searing lead tones or pair it with the Behringer 904A VOLTAGE CONTRLLED LOW PASS FILTER and be prepared to hear some very interesting sounds.

Audio in and out connectors are available on the 904B that let you process an incoming signal before sending it to another module via a 3.5 mm TS cable. You can also use the Control Inputs to connect voltage signals from other modules to affect the cutoff frequency. Use this module to add distinct tweaks to your patches so you can create more unique sounds.

Installing the 904B VOLTAGE CONTROLLED HIGH PASS FILTER is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the 904B VOLTAGE CONTROLLED HIGH PASS FILTER to be mixed with other synth modules for a truly unique set up.
Read more
 More than 10 in stock $105.31
Click for better price!
or call +44 20 7424 1960
quote 772804
Behringer 921B VCO Module
Behringer 921B VCO Module (oscillator module)
Cat: 780467 Rel: 19 Oct 20
 
VCO module
Notes: Clone of the Moog 921B module, a free-running LFO or oscillator driven by the accompanying 921A oscillator driver module. An affordable entry point to classic Moog-inspired sounds.

Supplier's Notes:
Enter the Behringer 921B OSCILLATOR. An authentic reproduction of the circuitry from the "Modular 55 and 35" series oscillators used by the world's most famous pop, rock and jazz musicians. Now you can build your very own, unique synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match with specific modules to customize your synth and complement the genre of music you play or go all out and have a room filled from floor to ceiling with modules that'll fulfill any synth geek's wildest dreams.

The 921B OSCILLATOR module is controlled by the Behringer 921A OSCILLATOR DRIVER or can be used as a free-running LFO. Separate Frequency and Range knobs allow you to adjust the frequency range in semitones and in octaves. The 921B along with the 921A modules form the foundation of a proper modular synthesizer and the basis for some really great music.

The 921B OSCILLATOR features independent audio outs for each of the 4 waveforms which include sine, triangular, sawtooth and rectangular which can be patched out to different modules to unlock even more creative possibilities. A dedicated oscillator sync input and switch can be used to sync the 921B to a signal introduced into the Sync In jack. Parallel link jacks allow the 921B to link to other 921B in the chain.

Installing the 921B OSICLLATOR is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the 921B OSICLLATOR to be mixed with other synth modules for a truly unique set up.
Read more
 More than 10 in stock $85.36
Behringer 923 Filters Module
Behringer 923 Filters Module (eurorack module)
Cat: 772935 Rel: 19 Oct 20
 
filters module
Notes: Enter the Behringer 923 FILTERS. An authentic reproduction of the circuitry from the Modular 35 and 15 series filters used by the world's most famous pop, rock and jazz musicians. Now you can build your very own, unique synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match with specific modules to customize your synth and complement the genre of music you play or go all out and have a room filled from floor to ceiling with modules that'll fulfill any synth geek's wildest dreams.

The 923 features separate Low and High Pass filters each with their own dedicated frequency cutoff controls. The Low Pass filter control will roll off all frequencies above the set threshold frequency from 10Hz to 10KHz while the High Pass filter control will roll off frequencies below the set frequency. Each filter comes with their own 3.5 mm ins and outs giving you the ability to route incoming signals through the IN jack, through the filter and back out the OUT jack.

For you to shape an endless number of tones, the 923 comes with a white and pink noise generator. Use the parallel jacks for each of the noise sources to send out a white or pink noise signal and start sweeping frequencies to build tension and excitement in your songs, or use them to create some percussive sounds for a real groovy drum beat.

Installing the 923 is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the 923 to be mixed with other synth modules for a truly unique set up.
Read more
 9 in stock $66.36
Behringer 961 Interface Module
Cat: 772932 Rel: 19 Oct 20
 
interface module
Notes: Enter the Behringer 961 INTERFACE Module. An authentic reproduction of the circuitry from the Modular 55 Series used by the world's most famous pop, rock and jazz musicians. Now, musicians can build their very own, unique, synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match specific modules to create your personal, unique synth to complement the music you play or go all out and fill a room, from floor to ceiling, with modules that'll fulfill any synth geek's wildest dream.

The 961 features an audio to V-Trig Converter, allowing you to plug in any audio source and transform it into a voltage trigger to drive other modules in your rig. Dual S-Trig to V-Trig and a multichannel V-Trig to S-Trig converters on the 961 can be utilized to switch or control a particular function on other modules.

Controls on the 961 include a Sensitivity knob that adjusts the gain of the audio signal coming into the module via the Audio In jack. Column B in each V-Trig In bank has a Switch-On Time knob you can use to manually control how short or long the "ON" duration is for S-Trig signals. This feature is normally used to drive the 911 envelope generator. Add a 960 sequential controller to release the full creative potential of this interface module.

Installing the 961 INTERFACE is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and mount the module using the included screws. This allows for the 961 INTERFACE to be mixed with other synth modules for a truly unique set up.
Read more
 More than 10 in stock $86.46
Click for better price!
or call +44 20 7424 1960
quote 772932
Behringer 994 Multiples Module
Cat: 772832 Rel: 19 Oct 20
 
multiples module
Notes: Enter the Behringer 994 MULTIPLES Module. An authentic reproduction of the circuitry from the Modular 55 Series used by the world's most famous pop, rock and jazz musicians. Now, musicians can build their very own, unique, synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match specific modules to create your personal, unique synth to complement the music you play or go all out and fill a room, from floor to ceiling, with modules that'll fulfill any synth geek's wildest dream.

The dual 4-socket multiples of the 994 MUTLIPLES allows you to split CV or audio signals to multiple destinations. Now, one signal can control several modules.

Installing the 994 MULTIPLES is simple as it was designed to fit into a standard Eurorack case. This allows for the 994 MULTIPLES to be mixed with other synth modules for a truly unique set up.
Read more
 9 in stock $31.88
Behringer 995 Attenuators Module
Cat: 772930 Rel: 19 Oct 20
 
attenuators module
Notes: Enter the Behringer 995 ATTENUATORS. An authentic reproduction of the circuitry from the Modular 55 and 15 series attenuators used by the world's most famous pop, rock and jazz musicians. Now you can build your very own, unique synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match with specific modules to customize your synth and complement the genre of music you play or go all out and have a room filled from floor to ceiling with modules that'll fulfill any synth geek's wildest dreams.

The 995 features three separate attenuators each with their own independent inputs and outputs. The attenuators can be used to adjust the level of the input signal passively from - 8 to unity gain and accept both audio and CV signals. Connecting a single signal to the first input will allow it to pass to all 3 outputs for up to 3 variable outputs of a single signal source. Introducing a signal into the subsequent outputs will break the chain from the previous input. For example, if you have a signal in input 2, then this will feed into input 3 leaving input 1 to feed out of output 1.

Installing the 995 is simple as it was designed to fit into a standard Eurorack case. This allows for the 995 to be mixed with other synth modules for a truly unique set up.
Read more
 8 in stock $53.20
Click for better price!
or call +44 20 7424 1960
quote 772930
Blue Lantern Modules Phobos Lunar VCF MK2 Module
Cat: 775775 Rel: 16 Nov 20
 
VCF module
Notes: This module contains about 5 modules in one. You get a lot of features. This is using a Phase Lock Loop based internal patch to create the oscillation (LFO). I then give you access to the clock divider used in the Phase Lock process. Think of this module as a 'phase lock loop for dummies'. Just play and forget kind of module. No menu diving or complicated stuff to remember.

This LFO can go audio rate or really slow using the toggle switch to decide LFO/HFO mode. There is an internal CV switch for you to select from 6 wave forms. The special wave form is the step generated wave. It sounds like a quantized ramp wave, and moves at half the overall internal lfo rate. There is a nice Level out knob to control the LFO wave output. This LFO has very HARD sync, that will reset the lfo.

The other half of this module contains a clock divider that also uses a CV selectable output. The clock divider can also go audio rate and sound like a sub harmonic generator when in audio rate. At very high frequencies (FREQ knob fully clockwise), the clock divider will lock up, this is due to the cmos chip, this is normal.

The clock divider can be used with internal clock or external clock.

This is a fun performance type of lfo with just about all the features an LFO should have. There is 1v/ octave tracking of about 4 octaves when used as an oscillator. This product is for most part more of an LFO. The best patch one can do with this product is a 'cross' patch from the Phobos Lunar LFO, and have it patched to your Oscillator module. Then patch your oscillator to the CV waveform select on the Phobos. Hear what your oscillator sounds like, it will blow your sound pallete.

Width: 12hp

Current: +80mA,-50mA
Read more
MRP:$251.45 SAVE 21%
 1 in stock $198.46
Click for better price!
or call +44 20 7424 1960
quote 775775
Doepfer A-106-6V XP Multimode Filter Vintage Edition Module
Cat: 790473 Rel: 30 Oct 20
 
Multimode filter module
Notes: Module A-106-6 is a multimode filter that is based on the filter circuit of the Oberheim Xpander. The module features 15 different filter types with 8 filters available simultaneously.

The toggle switch Filter Group is used to switch between 2 filter groups. These filter types are available:
1L (6 dB low pass)
2L (12 dB low pass)
3L (18 dB low pass)
4L (24 dB low pass)
1H (6 dB high pass)
2H (12 dB high pass)
3H (18 dB high pass)
2B (6 dB band pass)
4B (12 dB bandpass)
2N (notch)
3A (allpass)
2H1L (asymmetrical band pass made of a 12 dB high pass and a 6 dB low pass)
3H1L (asymmetrical band pass made of a 18 dB high pass and a 6 dB low pass)
2N1L (combination of notch and 6 dB low pass)
3A1L (combination of allpass and 6 dB low pass)

The module features voltage controlled resonance. For filter group 2 (2L, 4L, 2B ...) even self oscillation is possible. All standard VCF controls are available: manual filter frequency control Frq, one control voltage input with attenuator (FCV2)and one without attenuator (FCV1, ~ 1 V/octave). In addition voltage controlled resonance with manual control (Q) and a CV input with attenuator (QCV) are available. The circuit is based on a 24dB lowpass filter. The outputs of the four internal filter stages (i.e. the 6, 12, 18 and 24dB outputs) are mixed together with different levels and polarities to obtain 15 different filters. Because of this special circuit the outputs have slightly different levels and noise floor. This is caused by the different internal amplifications and numbers of stages that are required to generate the filter in question. If e.g. a filter is derived by one stage only (e.g. the 6 dB, 12dB, 18dB and 24dB low pass) the noise floor is smaller compared to a filter that is derived by a combination of all four filter stages. The module generates a distorted audio signal if the level control is set to about 50% (i.e. center position) or more with A-100 standard signals like VCOs.

Power consumption: 50mA at +12V and 50mA at -12V
Depth: 50mm
HP : 12
Read more
MRP:$211.53 SAVE 18%
 2 in stock $174.06
Click for better price!
or call +44 20 7424 1960
quote 790473
Doepfer A-118-2V Noise & Random Slim Line Vintage Edition Module
Cat: 790467 Rel: 10 Nov 20
 
Signal generator module
Notes: Module A-118-2 generates the signals white noise, colored noise, continuous random voltage and stepped random voltage.

The noise signal is generated 100% analog by amplification of the noise of a transistor. White and colored noise are usually used as audio sources. The random voltages are normally used as control voltages (e.g. for filter frequency or any other voltage controlled parameter).

The A-118-2 gives you the ability to mix the relative amounts of Red and Blue noise (low/high frequency component) in the colored noise output.

For the continuous random voltage the rate of change (Rate) and amplitude (Level) of the random voltage can be adjusted. The continuous random voltage is used as source for the S&H/T&H unit. The type of operation can be set to S&H (sample and hold) or T&H (track and hold). When T&H is chosen the output signal follows the input signal as long as the Clock input is "high". As soon as the clock signal changes to "low" the last voltage is stored. When S&H is chosen the input signal is sampled at the rising edge of the Clock signal. For the Clock signal a "digital" signal (e.g. Clock, Gate, rectangle output of an LFO) is required. Dual color LEDs are used to indicates the continuous and stepped random voltages.

Controls:
Blue: share of the high frequencies in the the colored noise output
Red: share of the low frequencies in the the colored noise output
Rate: rate of change of the continuous random voltage
Level: amplitude of the continuous random voltage
TH/SH: switches between T&H und S&H

Inputs and outputs:
RND: continuous random voltage output (with LED display)
TH/SH: stepped random voltage output (with LED display)
Clk: Clock input of the S&H/T&H unit
C Noise: colored noise output
W Noise: white noise output

Important notes:
After power on it takes a few minutes until the two noise signals and the random signals are generated. The module is not faulty when after power on the signals do not appear immediately!

The S&H/T&H function is realized by pure analog circuitry (electronic switch followed by a holding capacitor and buffer). Consequently the output voltage drifts a bit in the holding state because the capacitor is discharged by parasitic resistors. The drift depends also upon environmental conditions like humidity or temperature.

The level of the random voltage changes with the settings of the Blue and Red controls. Especially the Red control affects the random voltage level (which is derived by low pass filtering from the colored noise signal) because the Red control changes the share of the low frequencies in the colored noise signal. The effect of the Blue control is much smaller because it changes the share of the high frequencies in the colored noise signal which are filtered out by the low pass of the random circuitry.

Power consumption: 20mA at +12V and 20mA at -12V
Depth: 40mm
HP : 4
Read more
MRP:$109.09 SAVE 25%
 2 in stock $82.03
Click for better price!
or call +44 20 7424 1960
quote 790467
Doepfer A-119V External Input & Envelope Follower Vintage Edition Module
Cat: 790461 Rel: 30 Oct 20
 
External input & envlope follower module
Notes: Module A-119 (External Input / Envelope Follower) is designed to allow external audio signals to be integrated into the System A-100. It comprises a pre-amp, envelope follower, and comparator.

The pre-amp has two inputs: an unbalanced input for line level signals, with a gain factor of from 0 to 20, and a balanced input with a gain factor of from 0 to 500, for insertion of low level signals, for instance from a microphone or electric guitar. The Envelope Follower reads the signal level of the input, and puts out a proportional voltage as an envelope at its own output. The comparator generates a gate signal whenever the input goes above an adjustable trigger threshold. Three LEDs help you keep track of overload, the envelope, and the gate signal.

Power consumption: 30mA at +12V and 20mA at -12V
Depth: 45mm
HP : 8

The module was designed primarily to derive an envelope and gate signal from the incoming audio signal. The built-in preamp is not "high-end" and shows - depending upon the position of the gain control - a reduction of higher frequencies in the frequency response. It is possible to improve the frequency response by replacing IC1 (the upper of the two integrated circuits) by a more sophisticated circuit. For example the LME49740 can be used. It's no longer in production but available e.g. via Ebay.

Apart from this an incoming audio signal with sufficient level can be patched directly to the audio input of A-100 modules (e.g. filters), i.e. without the detour via the A-119. In this case the A-119 functions only as envelope and gate generator and the audio output of the A-119 remains unused.
Read more
MRP:$97.12 SAVE 18%
 5 in stock $79.81
Click for better price!
or call +44 20 7424 1960
quote 790461
Doepfer A-135-2V Voltage Controlled Mixer Vintage Edition Module
Cat: 790453 Rel: 30 Oct 20
 
Voltage controlled mixer module
Notes: A-135-2 is a miniature version of the A-135-1. Behind a front panel with 8 HP only four linear VCAs (voltage controlled amplifiers) and a voltage controlled mixer based on the VCAs are available.

Controls, In/Outputs and Functions of each VCA:

Level (manual control of the VCA amplification), small rubberized knob (L1...L4)

Control voltage input with associated attenuator (CV1...CV4), for the full VCA control range about 0...+5V control voltage are required (attenuator fully clockwise), for higher control voltages the attenuator is used, the attenuators are without knobs, just plastic shafts with white marker

Signal Input

Signal Output

All inputs and outputs are DC coupled. Consequently the VCAs can be used to process both audio and control voltages (e.g. to control the level of LFOs or envelopes)

The signal input is not equipped with an attenuator. But the VCAs can process all signals up to 15Vpp / -7.5...+7.5V without clipping. In case of higher levels an external attenuator is required (e.g. A-183-1).

The available amplification range is 0...1, the maximal amplification is 1 (i.e. it "clips" and remains at 1 even if the control voltage goes beyond the value that corresponds to amplification 1)

Functions of the voltage controlled mixers:

two outputs ("Selected" and "All")

Selected output: the ouput if a VCA is removed from this sum signal when a plug is inserted into the corresponding VCA output.

All output: sum of all VCA outputs, regardless of inserted plugs into the VCA outputs

The maximal amplification is about 0.6 to avoid clipping at the mixer outputs (otherwise the outputs may distort with 15Vpp signals at each signal input and full amplifications)

Special functions of the voltage controlled mixer (selectable by internal jumpers)

Dual Stereo VCA: In this case the control unit of VCA1 (L1 + CV1) affects also VCA3 and the control unit of VCA2 (L2 + CV2) affects also VCA4. The control units of VCA3 (L3 + CV3) and VCA4 (L4 +CV4) are out of operation.

Quad VCA: In this case the control unit of VCA1 (L1 + CV1) affects all four VCAs. The control units of VCA2, VCA3 and VCA4 are out of operation. In this mode the module has the same function as module A-132-2. That's why module A-132-2 will be discontinued.

Normalling of the signal inputs: by means of internal jumpers signal input 1 can be normalled to signal input 2, signal input 2 to signal input 3 and signal input 3 to signal input In 4. That way the same input signal can be distributed to four different channels by means of control voltages (e.g. quadrophonic distribution of audio signals). Suitable control voltage sources are e.g. A-144 (Morphing Controller) or A-143-9 (Quadrature LFO).

Additional technical specification for each VCA (based on the specifications of the VCA circuits CEM3360/AS3360 used in the module):

Crosstalk between VCAs: typ. - 80dB

Signal attenuation at 0V CV: typ. -70dB

Total harmonic distortion: typ. 1%

Control voltage feedthrough: max. 15mV

Width: 8 HP / 40.3 mm
Depth: 45 mm (measured from the rear side of the front panel)
Current: +40mA (+12V) / -40mA (-12V)
Read more
MRP:$156.99 SAVE 22%
 4 in stock $121.94
Click for better price!
or call +44 20 7424 1960
quote 790453
Doepfer A-174-4 3D Joystick Module
Cat: 765892 Rel: 30 Oct 20
 
control voltage module
Notes: Module A-174-4 modules outputs three control voltages generated by a spring-loaded X/Y cross potentiometer (so-called joy stick) and a Gate signal. The control voltages for X and Y are controlled by the X and Y position of the joystick in the usual way. The third control voltage Z is controlled by the rotation of the spring-loaded joystick knob. The Gate signal is generated by a button at the center/top of the joystick knob.

For each control voltage the non-inverted signal (X, Y, Z) as well as the inverted signal with adjustable offset (-X+XO, -Y+YO, -Z+ZO) are available. The generic joystick control voltages are bipolar, i.e. they range from typ. -5V (lowest position) via 0V (center position) to typ. +5V (highest position). The "Overlap" switches can be used to add a fixed offset voltage of typ. +5V to the non-inverting output in question so that the output voltage range changes to typ. 0...+10V (rather than -5...+5V). That's necessary if e.g. a VCA has to be controlled, which requires a pure positive control voltage range. The switches are named "overlap" because they allow the overlapping of the non-inverting CV output (X, Y, Z) with the inverting output (-X+XO, -Y+YO, -Z+ZO) for crossfading applications. With the overlap switch "on" and appropriate setting of the offset control it's possible to obtain a control voltage range of 0...+10V for the non-inverting output and +10V...0V (i.e. same range but opposite direction) for the inverting output.

The offset voltages which are added to the inverting outputs can be adjusted by means of three small potentiometers. That way different kinds of control voltage ranges are possible, e.g.
-5V ... +5V for the non-inverting output and +5V ... -5V for the inverting output ( Overlap = off, Offset = 0)
0 ... +10V for the non-inverting output and +10V ... 0V for the inverting output ( Overlap = on, Offset = max)
-5V ... +5V for the non-inverting output and +10V ... 0V for the inverting output ( Overlap = off, Offset = max)
0 ... +10V for the non-inverting output and +5V ... -5V for the inverting output ( Overlap = on, Offset = 0)
On top of this the four quadrant voltages Q1, Q2, Q3 and Q4 are available. A quadrant voltage becomes positive when the joystick is positioned in the quadrant in question.
Each CV output is equipped with an LED that displays the present voltage.

Because of the construction height of the joystick (about 7 cm) the module cannot be installed into the cases A-100P6, A-100P9, A-100PMS6, A-100PMS9 and A-100PMS12 during transportation as the depth of the case cover is not sufficient. Into the base cases A-100PB and A-100PMB as well as in all other cases without cover the module can be installed without problems.

HP : 12
Read more
MRP:$215.52 SAVE 17%
 4 in stock $178.49
Click for better price!
or call +44 20 7424 1960
quote 765892
Endorphin.es Cockpit 2 Four Stereo Channels Performance Mixer Module (black faceplate)
Cat: 799787 Rel: 13 Nov 20
 
4-channel performance mixer module
Notes: Endorphin.es Cockpit² is a 4-channel stereo mixer with side-chain ducking.

Key facts:

Increased headroom
Improved sound quality
the LEDs are blue/red instead of red/green (Daltonic friendly)
No TRRS jacks anymore
New knobs on the black module version
Power consumption: 75mA at +12 V and 40mA at -12 V

Depth: 33mm

HP : 6
Read more
MRP:$226.17 SAVE 17%
 1 in stock $188.46
Click for better price!
or call +44 20 7424 1960
quote 799787
Endorphin.es Cockpit 2 Four Stereo Channels Performance Mixer Module (yellow faceplate)
Cat: 799781 Rel: 13 Nov 20
 
Performance mixer module with 4 stereo channels
Notes: Endorphin.es Cockpit² is a 4-channel stereo mixer with side-chain ducking.

Key facts:
Increased headroom
Improved sound quality
the LEDs are blue/red instead of red/green (Daltonic friendly)
No TRRS jacks anymore
New knobs on the black module version

Power consumption: 75mA at +12 V and 40mA at -12 V
Depth: 33mm
HP : 6
Read more
MRP:$226.17 SAVE 17%
 1 in stock $188.46
Click for better price!
or call +44 20 7424 1960
quote 799781
Endorphin.es Queen Of Pentacles 7 Voice Analogue Drum & Percussive Syntheiser Module
Cat: 791289 Rel: 23 Sep 20
 
7-voice analogue drum & percussive synthesiser module
Notes: Queen of Pentacles is a complex 7 voice analog drum/percussive synthesizer module based around:

3 analog discrete TR-909 circuits with advanced noise spectrum animation

4 zero latency microSD card sample players - including a set of freshly recorded samples for modern electronic music using handcrafted Paiste 602 15" and 18" cymbals

Effect processor as found in famous Grand Terminal/Milky Way/Blck_Noir

The new Queen of Pentacles covers the range of Dance/EDM/Techno music styles and is inspired by the famous TR-909.

The module offers seven drum sounds. Three drums are analog - bass drum, snare drum and clap. The other four drums are sample-based. Just .wav files playback directly from a microSD card with additional volume envelope, decay and pitch control. Those are simple modifiers but help you to shape the sounds played as one-shots.

There are 7 sounds in the drum kit. 3 drums are analogue - bass drum, snare drum and clap. These 3 are generated analogue for the following reason: each sound has its own binary noise generator and really - each time they are triggered the flavor is unique - they simply never repeat. At the same time they don't phase out each other as in the original 909, which is great - for example in the situation when reinforcing the clap on 2nd and 4th with an additional beat of the snare.

The other 4 drums are sample-based. Just .wav files playback directly from a microSD card with additional volume envelope, decay and pitch control. Those are simple modifiers but help you to shape the sounds played as one-shots.

Back then when Endorphin.es launched BLCK_NOIR, they introduced the next product line with black panels, as people liked the new styling. Now, along with continuation of the black panels comes another leap forward: New aluminum knobs suit the design perfectly.
Read more
MRP:$663.87 SAVE 19%
 6 in stock $536.59
Click for better price!
or call +44 20 7424 1960
quote 791289
Endorphin.es Running Order Compact 2-Channel Trigger Generator Module
Cat: 793964 Rel: 07 Oct 20
 
2-channel trigger generator module
Notes: Compact and versatile two-channel trigger module with built-in master clock for precise timing, SH-101-style sequencer, Euclidean mode, divider options, pattern storage and lots more.

Supplier's Notes:
Running Order is a super compact two track trigger generator: it can be a precise master clock or manipulate an incoming clock and thus works great as a sub-sequencer/divider in your eurorack environment.

Read more
MRP:$194.24 SAVE 22%
 3 in stock $151.89
Click for better price!
or call +44 20 7424 1960
quote 793964
Erica Synths Black Quad VCA2 Four Channel Voltage Controlled Amplifier & Mixer Black Series Module
Cat: 791783 Rel: 09 Oct 20
 
Four-channel VCA & mixer module
Notes: Erica Synths Black Quad VCA2 is a versatile four channel voltage controlled amplifier and mixer module for use in complex modular systems. Each channel has linear/logarithmic response selector and signal level indicator LED. All outputs are sequentially mixed and CV inputs are normalled to each other, so you can use the module in various configurations. If no CV is applied, the Black Quad VCA2 performs as a signal mixer, and the 4th channel is DC coupled for controlling CV sources, as well.
Read more
MRP:$290.03 SAVE 24%
 1 in stock $221.72
Frequency Central Boom!! Analogue Drum Voice Module
Cat: 800468 Rel: 13 Nov 20
 
Analogue drum voice module
Notes: Boom!! is an analogue drum voice with a broad range of applications.

The heart of the module is a VCO which is built around one half of a LM13700. The VCO has a HIGH/LOW switch as well as a SWEEP control, which defines it's response to the onboard envelope.

The other half of the LM13700 has been carefully crafted into a release envelope generator, which has a FAST/SLOW switch in addition to a RELEASE control. As a bonus, the input of the envelope is velocity sensitive, allowing for a dynamic response.

Additionally, there is an envelope output, which can be used to drive external modules.

Boom!! can be used to create bass drums, tom toms, chirps, blips and clicks. Check it out now.

Depth: 35mm

Width: 4HP

12V draw: 10mA

-12V draw: 9mA

5V draw: 0mA
Read more
MRP:$159.65 SAVE 23%
 1 in stock $123.05
Click for better price!
or call +44 20 7424 1960
quote 800468
Frequency Central High Towers Programmmable & Addressable 4-Channel Voltage Controlled Clock Divider Module
Cat: 794787 Rel: 09 Oct 20
 
clock modulator/frequency divider/quad synth module
Notes: High Towers is our brand new super flexible clocking module. At it's heart it is based on the principles of clock division of an incoming clock signal. High Towers has 4 assignable outputs, each of which can be assigned a clock division in a number of different ways:
Manually assigned using a potentiometer.
Assigned by external CV (in which case the associated potentiometer becomes a CV attenuator).
Assigned by one of High Towers' internal presets.

High Towers is able to receive external clock and reset pulses. High Towers internally divides the incoming clock pulses by 1, 2, 4, 8, 16, 32, 64 and 128. Each of High Towers 4 assignable outputs can stream any of these divisions.

High Towers comes pre-programmed with 8 preset division models. The division models set each output to stream a particular division. The division that any given output is streaming can be over-ridden manually or by external CV.

High Towers comes pre-programmed with 8 different direction models. The direction models select whether High Towers counts up, down, up/down, or various combinations of up and down.

Product Specifications
Depth: 35mm
Width: 10HP
12V draw: 15mA
-12V draw:11mA
5V draw: 0mA
Read more
MRP:$255.44 SAVE 23%
 1 in stock $197.34
Click for better price!
or call +44 20 7424 1960
quote 794787
Frequency Central Logic Bomb Dual CV Addressable Boolean Logic Module
Cat: 795615 Rel: 16 Oct 20
 
Boolean logic/utility synth module
Notes: Logic Bomb is a Boolean logic module with two independent but identical sections.

Both sections feature addressable Boolean logic, with a choice of any one of:

NOT A

NOT B

AND

NAND

OR

NOR

XOR

XNOR

Logic gate type may be chosen either via knob or via CV input.

When addressed via CV, the knobs become attenuators. CV range is 0V to 5V.
Read more
MRP:$191.58 SAVE 23%
 1 in stock $147.45
Click for better price!
or call +44 20 7424 1960
quote 795615
Frequency Central Reset Simulation Boolean Logic Module
Cat: 796770 Rel: 05 Nov 20
 
Boolean logic module
Notes: Reset Simulation is a Boolean logic module with two inputs, A and B, and 8 simultaneous outputs, NOT A, NOT B, AND, NAND, OR, NOR, XOR and XNOR. Each of the 8 outputs go high when their respective truth tables are satisfied by the A and B inputs. Legend has it that if the user can make all LEDs light up at the same time, the current simulation that we are living in will be replaced with another, slightly different simulation. Another legend has it that this has already happened multiple times. A further legend refutes both previous legends as the ramblings of a madman.

Product Specifications
Depth: 35mm
Width: 6HP
12V draw: 11mA
-12V draw: 7mA
5V draw: 0mA
Read more
MRP:$178.27 SAVE 16%
 1 in stock $149.00
Click for better price!
or call +44 20 7424 1960
quote 796770
Frequency Central Turn! Turn! Fixed Voltage Sources Module
Cat: 800470 Rel: 13 Nov 20
 
Fixed voltage sources module
Notes: Fixed voltage source with BIG KNOBS and multiple voltage ranges.

Fixed voltage sources are not a new idea in modular, but we hope that Turn! Turn! brings a new twist to the concept. Turn! Turn! features two independent fixed voltage sources with a useful range of features.

Turn! Turn! grew out of a conversation with Steve Levine - when a producer of such note makes a suggestion you have to listen - and act on it. Steve suggested that it would be useful to have a fixed voltage source under the control of a big knob, and the ability to go from as little as 1V over the entire range of the knob. Hence subtle, incremental changes are possible.

The final feature set includes a voltage selection switch as well as a unipolar/bipolar switch. Both normal and inverted outputs are included. The following ranges are available from Turn! Turn! depending on switch positions:
0V to 1V
0V to 2.5V
0V to 5V
-1V to 1V
-2.5V to 2.5V
-5V to 5V

Depth: 29mm

Width: 8HP

12V draw: 9mA

-12V draw: 9mA

5V draw: 0mA
Read more
MRP:$159.65 SAVE 23%
 1 in stock $123.05
Click for better price!
or call +44 20 7424 1960
quote 800470
Happy Nerding FM AID Through-Zero Linear Frequency Modulator Module (silver)
Cat: 795454 Rel: 11 Nov 20
 
Frequency modulator module
Notes: Clever FM module that does digital-style through-zero FM using analogue circuits. Use any signals from other modules as your carrier and modulator, then phase modulate or wavefold in the FM Aid.

Supplier's Notes:
FM AID is a module designed to perform through-zero linear Frequency Modulation (FM) in the analog modular world. Any arbitrary signals can be used as a Carrier and Modulator. The module copies FM in how it is done in digital implementation, but in a completely analog circuit free of digital aliasing artifacts. Digital or software FM oscillators are mainly based on a ramp waveform which is then shaped to other waveforms. This is also represented in the FM AID module: sawtooth signal is expected on the Carrier input to give the indicated sine, triangle, sawtooth and square waveforms on the respective outputs. However the user is not limited to only use sawtooth for the Carrier and any other signal can be plugged giving many complex waveforms at the outputs.

All known FM tricks from digital implementation are also applied - you can endlessly experiment with the Carrier/Modulator frequency ratios, Modulation index (FM knob), Modulator's amplitude shaping (CV knob), feedback FM (output is fed back to the Modulator's input) and many other.
Carrier input has normalled connection to the Modulator's input. This internal routing is disconnected each time a plug is inserted in the Modulator's input. That is a handy option which allows the module to be used with only one signal source - this single signal will act as Carrier and Modulator at the same time. There won't be any frequency differences between Carrier and Modulator in this case, but many interesting wave folding sounds will be available anyway.

Technically speaking FM AID uses Phase Modulation, not Frequency Modulation. The sonic difference is that the produces sound is brighter.

SPECIFICATIONS

Carrier input level: -5V ... + 5V (can also accept inputs ranging from -1V ... +1V] to [-12V ...+12V] / [-15V ...+15V] using onboard trimmer)

Modulator input level: preferably -5V ... + 5V

CV input level: preferably -5V ... + 5V

outputs level: -5V ... + 5V

outputs impedance: 1 kOhm

module depth: 3 cm or 1,5 inches

power consumption: +45 /-45 mA at +/-12 Vdc, +50 /-50 mA at +/-15 Vdc
Read more
MRP:$192.91 SAVE 28%
 More than 10 in stock $138.59
Click for better price!
or call +44 20 7424 1960
quote 795454
Happy Nerding FX AID Multiple Audio Effects Module (black faceplate)
Cat: 792159 Rel: 05 Oct 20
 
Multiple audio effects module
Notes: 32 unique audio effects arranged in 4 banks of 8 effects. Three effect controls plus analog Dry/Wet control with dedicated CV input. High quality stereo signal pass. Assignable CV input to effect controls or to Sample Rate reducer (changes internal clock). Four user storable presets - stores selected program and all three controls. Spin FV-1 based.

The last used effect, assigns and presets are always remembered.

32 effects are simultaneously available, but FX AID can be reflashed with other user selected Happy Nerding effects in any order. Also the possibility to run freely available third party effects will be added too.

Reflashing procedure is quite easy: playing 40 sec long "wav" file of line level amplitude to CV input.

Reflashing mode: hold both buttons for 10 sec.

Please note the reverse CV operation of the Dry/Wet control: positive CV crossfades from Wet to Dry, and negative CV crossfades from Dry to Wet.

By default it runs on 32.77 kHz and, if sample rate reduction assign is used, this sample rate can be decreased down to 150 Hz or brought up to 48 kHz.

80 mA +12V
30 mA -12V
45 mm deep
Read more
MRP:$244.79 SAVE 19%
 3 in stock $197.34
Click for better price!
or call +44 20 7424 1960
quote 792159
Happy Nerding FX AID Multiple Audio Effects Module (silver faceplate)
Cat: 792156 Rel: 05 Oct 20
 
Multiple audio effects module
Notes: 32 unique audio effects arranged in 4 banks of 8 effects. Three effect controls plus analog Dry/Wet control with dedicated CV input. High quality stereo signal pass. Assignable CV input to effect controls or to Sample Rate reducer (changes internal clock). Four user storable presets - stores selected program and all three controls. Spin FV-1 based.

The last used effect, assigns and presets are always remembered.

32 effects are simultaneously available, but FX AID can be reflashed with other effects in any order.

Reflashing procedure is quite easy: playing 40 sec long "wav" file of line level amplitude to CV input.

Reflashing mode: hold both buttons for 10 sec.

Please note the reverse CV operation of the Dry/Wet control: positive CV crossfades from Wet to Dry, and negative CV crossfades from Dry to Wet.

By default it runs on 32.77 kHz and, if sample rate reduction assign is used, this sample rate can be decreased down to 150 Hz or brought up to 48 kHz.

80 mA +12V
30 mA -12V
45 mm deep
Read more
MRP:$244.79 SAVE 19%
! low stock $197.34
Click for better price!
or call +44 20 7424 1960
quote 792156
Happy Nerding FX AID XL Multiple Audio Effects Module (black faceplate)
Cat: 792162 Rel: 05 Oct 20
 
Multiple audio effects module
Notes: 32 unique audio effects arranged in 4 banks of 8 effects. Three effect controls plus analog Dry/Wet control with dedicated CV input. High quality stereo signal pass. Separate modulation inputs for all three effect parameters plus Sample Rate Reducer (SRR) input - changes internal clock. Four user storable presets - stores selected program and all three controls. Spin FV-1 based.

The last used effect, and presets are always remembered.

32 effects are simultaneously available, but FX AID can be reflashed with other effects in any order.

Reflashing procedure is quite easy: playing 40 sec long "wav" file of line level amplitude to SRR input.

Reflashing mode: hold both buttons for 10 sec.

Please note the reverse CV operation of the Dry/Wet control: positive CV crossfades from Wet to Dry, and negative CV crossfades from Dry to Wet.

By default it runs on 32.77 kHz and, this sample rate can be decreased down to 150 Hz or brought up to 48 kHz via SRR input.

80 mA +12V
30 mA -12V
45 mm deep
Read more
MRP:$287.37 SAVE 16%
! low stock $241.69
Click for better price!
or call +44 20 7424 1960
quote 792162
Happy Nerding FX AID XL Multiple Audio Effects Module (silver faceplate)
Cat: 792161 Rel: 05 Oct 20
 
Multiple audio effects module
Notes: 32 unique audio effects arranged in 4 banks of 8 effects. Three effect controls plus analog Dry/Wet control with dedicated CV input. High quality stereo signal pass. Separate modulation inputs for all three effect parameters plus Sample Rate Reducer (SRR) input - changes internal clock. Four user storable presets - stores selected program and all three controls. Spin FV-1 based.

The last used effect, and presets are always remembered.

32 effects are simultaneously available, but FX AID can be reflashed with other effects in any order.

Reflashing procedure is quite easy: playing 40 sec long "wav" file of line level amplitude to SRR input.

Reflashing mode: hold both buttons for 10 sec.

By default it runs on 32.77 kHz and, this sample rate can be decreased down to 150 Hz or brought up to 48 kHz via SRR input.

Please note the reverse CV operation of the Dry/Wet control: positive CV crossfades from Wet to Dry, and negative CV crossfades from Dry to Wet.

80 mA +12V
30 mA -12V
45 mm deep
Read more
MRP:$287.37 SAVE 17%
 6 in stock $238.37
Click for better price!
or call +44 20 7424 1960
quote 792161
Happy Nerding MMM VCF Moog Multi Mode Voltage Controlled Filter Module (black faceplate)
Cat: 799335 Rel: 11 Nov 20
 
Voltage controlled filter module
Notes: MMM VCMMM VCFF (M**g Multi Mode Voltage Controlled Filter) is a dual VCF having common controls for both parts. Thus it can be used as a stereo filter, or patched with different combinations of the available inputs/outputs. And all this functionality is packed in the compact 8 hp wide module.

MMM VCF has the famous transistor ladder core introduced by Bob Moog, but also features the added Band Pass and Low Pass modes, not available in the original design. Those extra modes are greatly widen the possible spectral modification of the input sound.

The module was carefully designed to have vanishingly small noise and bleed.

SPECIFICATIONS

FREQ: 20 Hz - 22 kHz - manual frequency range

RES: 35 Hz - 22 kHz - self oscillation range

FM: 0 - 7,5 V will modulate the whole hearing range at max settings

LP: 24 db/oct Low Pass output

BP: 12 db/oct Band Pass output

HP: 12 db/oct High Pass output

outputs impedance: 1 kOhm

module depth: 4 cm

width: 8 HP

power consumption: +42 mA / -40 mA at +/-12 Vdc
Read more
MRP:$227.50 SAVE 18%
 2 in stock $187.36
Click for better price!
or call +44 20 7424 1960
quote 799335
Intellijel MIDI 1U Compact MIDI To CV Conversion Module
Intellijel MIDI 1U Compact MIDI To CV Conversion Module (MIDI / clock modulator / CV modulation ynth module)
Cat: 785361 Rel: 21 Oct 20
 
MIDI voice and clock interface
Notes: Small and efficient MIDI to CV courtesy of Intellijel's 1U series. Works in conjunction with an Intellijel case or the MIDI IN Jacks 1U module to give you Pitch, Velocity, Mod, CC, Gate, Trig, Clock and Reset.

Supplier's Notes:
The MIDI 1U system provides all the essentials to control and sync your Eurorack modular from your computer, mobile, or hardware MIDI device with a minimum of fuss. Several of the module's most important features can be changed using the two front panel buttons, with full configuration capabilities offered via the Intellijel Config app, which is available for both Mac and Windows. The connectivity, feature set, expandability, and compact size make the MIDI 1U system ideal for integrating your modular gear with the rest of your rig.

Intellijel's MIDI 1U system comprises several elements, which work together to provide flexible, programmable MIDI-to-CV conversion to your Eurorack modules: The system comprises two mandatory components, and one optional component:

MIDI 1U module - This 14HP 1U module receives MIDI from an attached, external MIDI input connector (7U case, Palette case, or MIDI IN Jacks 1U module), and extracts (by default) Pitch, Velocity, Mod, CC, Gate, Trig, Clock and Reset messages i sending the proportional voltages to individual 3.5mm jacks for patching.If desired, the CC and MOD jacks may be configured to respond to either Channel Aftertouch or High Resolution CC, and the Reset jacks can be configured as a Run jack, instead. Additionally, MIDI 1U features an alternate Dual Mode, which maintains the Clock & Reset functionality, but uses the other six jacks to transmit Pitch, Velocity and Gate messages derived from two separate MIDI channels.
MIDI input connector - the MIDI 1U module does not have its own MIDI input jack. This enables you to use the MIDI/USB inputs built-in to your Intellijel 7U Performance Case or Palette Case. If you don't own one of these cases, you can purchase the MIDI IN Jacks 1U module to connect an external MIDI device.
MIDI Expander 1U module - This optional 14HP 1U module connects to the MIDI 1U module and adds an additional eight 3.5mm CV outputs. These outputs are fully programmable using the Intellijel Config app, and greatly expand MIDI 1U's ability to control your entire Eurorack system.

Width: 14HP
Depth: 14mm
Power: 34mA @ +12V
2mA @ -12V
Read more
MRP:$242.13 SAVE 16%
 More than 10 in stock $203.99
Click for better price!
or call +44 20 7424 1960
quote 785361
IO Instruments EUPORIE Four Pole Low Pass VCF Module With Moog & Sallen & Key Resonance
Cat: 795933 Rel: 10 Nov 20
 
VCF/filter synth module
Notes: Four Pole LOWPASS VCF with Moog and Sallen&Key Resonance

Powerful Sound from sweet to overdriven with lot of character

Simultan 24dB, 12dB & 6 dB Filter Outs

12dB State Variable Highpass Input Switch (150Hz)

Linear Resonance Distortion and Input Gain Stage

Make up Gain (Bass Boost) for Moog Style Resonance

Linear FM Input for audio Rate modulation and resonance CV IN

Keytracking In with 1V/Oct and Attenuator

Two exponential INs with Attenuators and CV THRU Outs

Width: 12 HP
Read more
MRP:$186.26 SAVE 34%
 2 in stock $123.06
IO Instruments HIMALIA Quad Noise Generator Module
Cat: 795932 Rel: 10 Nov 20
 
Flexible noise generator module
Notes: PENTA SOUND SOURCE

ANALOG NOISE from RED, WHITE to BLUE NOISE

DIGITAL NOISE with RATE and S/H OUT

SQUARE WAVE from DIGITAL NOISE

32 TRANSIENT SAMPLES with 8bit mode for craziness

SAMPLEs with 16 RATCHED variations and wide TUNE range

6 VOICE SQUARE WAVE mix with wide TUNE range

32 combinations for CHORDS, DRONES and UNISON sounds

Analog Mixing and Filtering for SQUARE mix OUT

7 CV INs and 1 GATE IN

Width: 16 HP
Read more
MRP:$230.16 SAVE 34%
 2 in stock $150.77
IO Instruments PASIPHAE Experimental Ring Modulator Module
Cat: 795930 Rel: 10 Nov 20
 
Ring modulator synth module
Notes: Experimental RING MODULATOR

Low distortion, low noise, high headroom

Low X & Y feedthrough

Structure allows access to every input

Wide range of sounds (tremolo, metallic, waveshape)

AC coupled X input Attenuator

DC coupled X input Attenuator

DC OFFSET for DC, coupled X IN and Y IN

Mute CV & switch for DC INs with LED indicator

Positive OUT and negative OUT

Width: 12 HP
Read more
MRP:$186.26 SAVE 35%
 1 in stock $121.96
IO Instruments SINOPE Dual High End VCA Module
Cat: 795918 Rel: 10 Nov 20
 
attenuator/VCA synth module
Notes: Two channel VCA with discrete core

Extra VCA for linear and exponential CV

Low noise, low feedthrough, low clicking

Very low distortion and gain of 2

Sweet and detailed sound, huge headroom

Wide dynamic range and high bandwidth

Normalized CV INs to the nominal value

3 ATTENUATORs for each channel

LEDs show the optimal range

VCA openness adjusting

Flexible structure to work with AUDIO & CV

Width: 16 HP
Read more
MRP:$226.17 SAVE 33%
 1 in stock $150.77
IO Instruments THEMISTO High Precision VCO Module
Cat: 795682 Rel: 10 Nov 20
 
LFO/oscillator synth module
Notes: Amazing value oscillator from this new German brand. Precise, rich analogue tones with sub-oscillator output, sine wave options and linear FM. Hard to beat for the money.

Supplier's Notes:
High precision VCO with wide frequency range

Clean waves without edge aberrations

PW from 0%-100% with fast edges for rich sound

Low distortion SINE wave

SUB OSC with rich sound and phase inversion

RESET/SYNC function with external GATE

Buffered V/OCT & GATE thru

Simultaneous linear & exponential FM

LFO mode

Width: 12 HP
Read more
MRP:$211.53 SAVE 33%
 5 in stock $140.80
Mutable Instruments Ripples Liquid Filter Module (2020)
Cat: 794968 Rel: 14 Oct 20
 
filter / oscillator / VCA synth module
Notes: It filters. Ripples is a classic, big-sounding analog four-pole filter in a small 8-HP package. Over the years it has earned its reputation as a no-fuss, elegant choice.

Ripples has two input paths: one with a drive control, allowing the signal to be distorted (or providing enough gain for the processing of line-level signals), and the other totally transparent, preserving the clean-sounding character of the original version of the module.

Three filter modes are available: high-pass, band-pass, and low-pass. The slope (2 or 4 poles) of the band-pass and low-pass outputs is switchable.

Self-oscillation is available for all modes and produces a clean sine-wave on the low-pass output. Unlike many classic 4-pole designs, this filter does not suffer from "loudness drop" when resonance is increased. The resonance loudness compensation circuit brings a slight tone coloration reminiscent of Japanese classics from the 80s, with a very round and liquid resonance.
The low-pass output goes through an internal VCA. This makes Ripples a good final stage module for an inexpensive, or space-constrained, subtractive synthesis synth voice.

A multimode filter
High-pass, band-pass, and low-pass outputs.
Switchable slope control for the band-pass and low-pass outputs. The slope of the high-pass output varies with resonance.
The low-pass output goes through an internal VCA - the perfect "end of subtractive chain" output!

All the CV inputs you need
Un-attenuated frequency CV, calibrated for 1V/Oct tracking of the self-oscillation tone over 4 octaves.
Frequency CV with attenuverter.
Resonance CV. Self oscillation starts at 4V. Control voltages above 5V are non-linearly compressed, for fine control of resonance overdrive.
VCA level for the low-pass output.

8HP
25mm
+12V:35mA
-12V:35mA

Specifications:

Cutoff knob range: 20Hz to 20kHz.

Fully analog, based on the V2164 low noise/distortion quad VCA chip, and LM13700 OTA for that extra bit of non-linearity.

Frequency CV inputs impedance: 100k.

Audio input impedance: 100k.

Resonance input impedance: 22k.

VCA level input impedance: 39k.

All CV inputs handle audio-rate modulations.
Read more
MRP:$202.22 SAVE 21%
 More than 10 in stock $159.65
Mutable Instruments Shades Attenuator Offset Mixer Module (2020)
Cat: 794969 Rel: 14 Oct 20
 
attenuator / offset / mixer synth module
Notes: 2020 update of this versatile three-channel mixer/attenuverter. Versatile and effective, updated with a fresh look to match Mutable's other modules.

Supplier's Notes:
The mixer/attenuverter that does not get in the way.

Shades provides 3 channels of audio/CV processing which can be configured either as active attenuators or as attenuverters.

Unconnected inputs are normalized to an internal precision voltage reference, which can produce either a +5V or +10V constant voltage.

Shades' outputs are daisy-chained, allowing adjacent groups of 2 or 3 channels to be mixed together.

This 2020 revision matches the design language used in the most popular and recent Mutable Instruments modules like Marbles, Plaits or Rings.

Useful in every patch.

Mix audio sources or CVs.

Add offsets to CVs, or change their polarity.

A companion for other modules.

Transpose the output of a sequencer without compromising V/O tracking.

Attenuate/invert CVs sent to modules which do not have attenuverters on their CV inputs.

Control with a knob parameters of other modules that are only accessible through CV inputs (like Just Friends' RUN or the Dixie's PW).

6HP
25mm
+12V:15mA
-12V:15mA

Specifications:

Input impedance: 100k.

All inputs DC-coupled.

Low-distortion audio op-amps and thin film 0.1% resistors improve transparency in audio mixing applications, and allow exact unitary gains for precision summing of pitch CV signals.

Stable and precise voltage reference, independent of power supply fluctuations.
Read more
MRP:$118.41 SAVE 23%
 More than 10 in stock $91.47
NANO Modules ALT Quad Voltage Controlled Amplifier & Cascaded Mixer Module
Cat: 796163 Rel: 20 Nov 20
 
synth module
Notes: 4 VCAs in 8HP designed to keep your signals clean and colourless

VCAs 1, 2, 3. Each one is equipped with a GAIN control, and a CV IN Attenuverter.

VCA 4. GAIN CV IN and the signal normalled to +5V (fully open VCA).

Additionally, the outputs of these channels are cascaded from left to right, allowing ALT to behave as a four-channel mixer.
Read more
MRP:$202.22 SAVE 22%
 1 in stock $157.43
NANO Modules FONT Massive Sounding Liquid Filter Module
Cat: 796875 Rel: 20 Nov 20
 
Voltage-controlled filter/sine oscillator module
Notes: FONT is a massive sounding liquid filter- designed to bring you powerful basslines, tons of FM modulation and a clean resonance over your audio path.

It features two simultaneous outputs:
2-pole Low Pass
2-pole Band Pass

It can also work as a sine oscillator, tracking 1V/OCT when the resonance is at its maximum level.

FONT can be used to make basslines, acid patterns thanks to its organic and musically sounding resonance.

Ping it to produce percussion sounds such as, bongos, congas or toms.

Applying a pitch envelope, it really shines as a kick-drum machine!

22 mA +12V
25 mA -12V
0 mA 5V
15 mm deep
O 4.60 (10 Votes) Average Rating
Read more
MRP:$199.56 SAVE 31%
 1 in stock $137.47
Click for better price!
or call +44 20 7424 1960
quote 796875
NANO Modules MAR Multichannel Dual Mixer Module
Cat: 796881 Rel: 20 Nov 20
 
Multichannel dual mixer module
Notes: MAR is a multichannel dual mixer module for the modular synthesizer. Both mixers are capable of mixing audio, CV and gate signals because they are DC coupled. MAR has two independent 4-channels mixers:

Mixer X: Is a four channel mixer with gain control for each channel. The potentiometers use logarithmic tape to have a good control with audio signals. This mixer features two outputs, the mixer output and its inverted. The output level is shown in the LED.

Mixer Y: Is a four channel mixer with gain control for the sum of the Y channels. If no jack is connected to the input Y1, the output of the Mixer X is normalled to Mixer Y. The potentiometer use logarithmic tape to have a good control with audio signals. This mixer features one output, the sum of the 4 channels. The output level is shown in the LED.

This Mixer can work as two 4-1 Mixer, or 7-1 Mixer with global gain control.

INPUTS:
4 Mixer X inputs.
4 Mixer Y inputs.

OUTPUTS:
Mixer X output.
Inverted Mixer X output.
Mixer Y output.
Mixer X + Mixer Y output.

FAST SPECS:
Dual mixer module for the modular synthesizer - Eurorack.
8 HP - 15mm Depth - Skiff friendly.
Both mixers are capable of mixing audio, CV and gate signals.
Mixer X: 4-channel mixer with gain control for each channel.
Mixer Y: 4-channel mixer with gain control for the sum of the channels.
If no cable connected to Mixer Y input 1, the output of the Mixer X is normalled to Mixer Y.
Can work as two 4-channel mixers, or one 7-channel mixer.
The output level is shown in the LEDs.
Read more
MRP:$219.52 SAVE 37%
 1 in stock $137.47
Noise Engineering Desmodus Versio Stereo I/O Tail-generator Reverb & User-flashable DSP Platform Module
Notes: Proper creative stuff with this one. Lush, characterful stereo reverb with CV control, distortion, pitchshifting, a freeze button and more. Oh, and it's got user-customisable DSP firmware for good measure.

Supplier's Notes:
Desmodus Versio is Noise Engineering's take on a synthetic-tail generator reverb. In only 10hp, it features true stereo in and out, seven CV-controlled parameters, and three reverb modes. Desmodus Versio's feedback control sets the length of reverberation, from short echoes through infinite regenerations.

At its max, the reverb ducks when it receives input, useful for creating sidechain ducking and atmospheres for percussion. The different reverb modes offer even more sound options with clean, distorted, and pitch-shifting shimmer settings. The FSU button acts as a freeze and also creates some noise to stimulate the reverb when there is no external input.

Desmodus Versio isn't just a reverb, though: it's a DSP platform. Its firmware can be changed via USB, so users can load future firmwares onto it or develop their own with upcoming open-source support.

With Desmodus Versio, Noise Engineering continues their tradition of supporting conservation:a portion of proceeds from every Desmodus Versio sold goes to Bat Conservation International. Find out why bats are not only cool but also an important part of our ecosystem at Bat Conservation International's website, batcon.org.
Read more
MRP:$419.08 SAVE 16%
 4 in stock $352.56
Click for better price!
or call +44 20 7424 1960
quote 781603
Noise Engineering Horologic Uter Clock Generator & Expander Module For Horologic Solum (black faceplate)
Cat: 795624 Rel: 30 Oct 20
 
Clock generator & expander module
Notes: Horologic Uter is an optional expander for Horologic Solum that offers an extra seven outputs at fixed, musically useful, divisors.
Read more
MRP:$110.42 SAVE 17%
 1 in stock $92.01
Click for better price!
or call +44 20 7424 1960
quote 795624
Items 1 to 50 of 107 on page 1 of 3
1  2  3  »

Filter

Synth modules
商品
Release Date
Close