安全购物

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

安全购物

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Synth modules

View:
Options
Items 1 to 40 of 40 on page 1 of 1
Subscribe to our weekly Studio Equipment emails
FORTHCOMING
Make Noise Tape & Microsound Music Machine Stereo Skiff System
coming soon $2,140.02
FORTHCOMING
Pittsburgh Modular Lifeforms Voltage Lab Blackbox Synthesiser Voice Module In Powered Case
MRP:$1,258.31 SAVE 17%
coming soon $1,048.59
FORTHCOMING
Pittsburgh Modular Lifeforms Voltage Lab Synthesiser Voice Module
Cat: 732132
 
Synthesiser voice module with unique sound palette - 48HP
Notes: The Lifeforms Voltage Lab module is a completely different type of analogue synthesizer, where every function of the instrument has been influenced by the behaviours and systems of the natural world. Wildly experimental and extremely deep, the Lifeforms Voltage Lab module is a sonic playground created to explore the natural systems and lesser known fringes of analogue synthesis. The Voltage Lab module is more than a simple collection of tools and functions, it is a unique modular synthesizer designed to reward deep experimentation and encourage the creation of unique sonic systems.

Generation:
The unique sound palette of the Lifeforms Voltage Lab originates with a complex oscillator pair that utilizes a wide range of shaping and manipulation options to move away from basic geometric shapes to more harmonically rich tones. A custom wave folder with enhanced waveform warping, linear FM, amplitude modulation, ring modulation, waveform cycling, hard sync, and more are available for extreme sonic research.

Manipulation:
A set of multi-function generators work as interactive voltage processing systems to create and modify complex control voltages. The function generators act as voltage controllable envelopes, LFOs, slew generators, and more to produce evolving control signals.

Interaction:
Twin dynamics controllers pull everything together. A unique circuit expanding on the classic low pass gate, the dynamics controller with variable response adds an organic depth to the sound of the Lifeforms Voltage Lab by simulating the natural behaviour of sound. The multi-mode signal processor features a 12db resonant filter, VCA, and percussive low pass gate modes.

Dimensional:
Sound interacts with the world around it. The Voltage Lab uses analogue delay to simulate this interaction and create an artificial sense of time and space. Manipulation of delay time and feedback add depth and warmth through reverb, chorus, flanging, Doppler, slap back, and echo type effects.

Unstable Systems:
Chaos is everywhere. Random gates and control voltages spark uncontrolled reactions, disrupt systems, and generate ideas. The Voltage Lab utilizes noise, stepped random CV, a pseudo-random sequence generator, pitched random CV, pitched random sequences, and random gates to add multiple levels of unpredictability to any patch.
Read more
MRP:$1,129.78 SAVE 17%
coming soon $941.48
FORTHCOMING
Pittsburgh Modular Lifeforms Interactive Touch Control Module
MRP:$499.98 SAVE 17%
coming soon $416.65
FORTHCOMING
Intellijel Quadrax 4 Channel CV Controllable Function Generator Module
coming soon $342.74
FORTHCOMING
Qu-Bit Nano Rand v2 Sample & Hold Noise Source & Random Voltage Generator Module (black faceplate)
coming soon $199.21
FORTHCOMING
Doepfer A-111-6 Miniature Synthesiser Voice Module (vintage edition)
Cat: 749811
 
Complete miniature monophonic synthesiser module - 10HP
Notes: VCO:

- Tune: manual tune control (with an internal jumper the range can be set to ~ +/-1 half an octave or ~ +/-2.5 octaves)
- Oct: range switch -1 / 0 / +1 octave
- Mod: modulation depth (attenuator wired to the Mod. socket)
- Dest: switch that is used to address the modulation to frequency modulation (position FM) or pulsewidth modulation (positon PM), in centre positon no modulation
- PW: manual pulsewidth control for rectangle waveform, PW can be also modulated by the Mod. input as mentioned above
- Wave: waveform switch (sawtooth / off / triangle), the sum of the waveform chosen by this switch and the rectangle is fed into the VCF (to turn the rectangle off the PW control has to be set fully CCW or fully CW)
- 1V/Oct. (socket): external CV input for VCO frequency (1V/octave)
- Access to internal bus CV (via jumper, optional, please remove the bus jumper if this feature is not used to avoid unwanted frequency modulation as then the unused CV line of the bus works as a kind of antenna)
- Triangle core VCO, frequency range about 32Hz ... 8kHz

Balance unit:

- The balance unit is made of two VCAs which are controlled by the sum of manual Balance control and the balance CV input in the opposite direction.
- The audio input of VCA1 is hard-wired to the VCO output, audio input 2 is connected to the socket Ext.In.
- The output of the balance unit is used as audio input for the VCF
- Bal.: manual balance control, fully CCW the internal VCO is used, fully CW the external signal (Ext.In) is used, at centre position both signals have about the same level
- CV Bal.: CV input for balance (range about 0...+5V)
- Ext. In: external audio input for VCA2, about 5 Vpp level required for similar loudness as the internal VCO
- This socket is normalled to the internal VCO suboctave f/2 signal (rectangle with half the frequency), if no external signal is applied the suboctave signal is used as the second signal for the balance unit

VCF:

- 24 dB low pass
- Frq: manual frequency control
- FM1: frequency modulation depth (attenuator wired to the VCF FM1 socket, the socket is normalled to the internal Envelope signal and then FM1 controls the modulation depth of the internal envelope applied to the filter)
- FM2 (socket) : second CV input for VCF without attenuator (about 1V/octave), can be used e.g. for VCF tracking by connecting the same CV which is used also for the VCO frequency
- Res: manual resonance control (up to self oscillation)
- If the VCO is turned off (waveform switch = centre position, pulsewidth control = fully CCW or CW) and the VCF resonance is set to maximum the module can be used as a sine oscillator, the tracking at socket VCF FM2 is about 1V/octave (not as precise as the VCO but much better than most other filters)
- ~ 11 octaves frequency range (~ 10 Hz ... 20kHz)

VCA:

- Gain: manual amplitude control (initial gain), can be used to open the VCA without envelope signal
- VCA (switch): used to switch between gate and envelope as control signal for the VCA, in centre position the VCA is not controlled by envelope or gate
- Note: when gate is used the VCA is controlled directly by the gate signal (i.e. hard on/off), this may lead to clicking noise under certain conditions (especially with low VCO/VCF frequencies)
- Special control scale: exponential scale in the range from about -20dB to -80/90dB, linear scale from about -20dB to 0dB
- Remark: this special control scale results in a loudness behaviour that is a bit different from pure linear or exponential VCAs
- Out: audio output of the module (= VCA output)

Envelope:

- Gate (socket): Gate input (min. +5V), can be normalled to the bus gate signal by means of a jumper
- Att: manual control for Attack
- D/R: manual control for Decay/Release
- Env. (switch): used to switch between A/D, ADSR and A/R mode of the envelope generator, in centre position (ADSR) the sustain level is fixed to about 50%
- Envelope (socket): envelope output (about +10V)
- CVT (socket): CV input for time control, by means of two internal jumpers one can select which time parameters are controlled by the CVT input (e.g. A only or D/R only or A/D/R) and in which direction (i.e. if an increasing CVT shortens or stretches the time parameter in question)
- Envelope LED display
- Attack time range: ~ 1ms ... 5 sec (can be extended by using the CVT input)
- Decay/Release time range: ~ 1ms ... 15 sec (can be extended by using the CVT input)
Read more
coming soon $183.16
FORTHCOMING
Intelijel FSR 1U Module
Cat: 747522
coming soon $79.26
FORTHCOMING
Intellijel Duatt 1U Module
Cat: 747516
coming soon $74.97
FORTHCOMING
Intellijel Qx Quadrax Expander Module
coming soon $73.89
FORTHCOMING
Xaoc Devices Hel Polyphonic Voice Control Expansion Module For Odessa
coming soon $72.82
FORTHCOMING
Doepfer A-185-1 Active Bus Access Module
Cat: 751760
 
Provides input & output access to your Eurorack's internal CV/Gate bus
Notes: Active bus access module to feed CV and Gate into the A-100 bus (e.g. when using more than one frame or with external CV/Gate interfaces). Miniature jack sockets for CV In, Gate In, 2xCV Out, 2xGate Out, 2 LEDs for CV/Gate control

In general, the A-185 is recommended as soon as more than 2 VCO's (A-110, A-111) are controlled by the same control voltage source. Without interconnection of the A-185 in this case tuning inaccuracies (scale) may occur. The A-185 is mounted close to the VCOs. The controlling voltage for all VCOs is applied to the CV In socket of the A-185. By means of the CV line of the bus board the CV is connected to all VCOs at the same bus board.
Read more
coming soon $52.48
FORTHCOMING
Befaco Percall Module
Cat: 739916
coming soon TBA
FORTHCOMING
Koma Elektronik Sensor Interface Eurorack Module
coming soon TBA
FORTHCOMING
Doepfer A-188-1Y 256 Stages BBD Delay Module
Cat: 755390 Rel: 19 Nov 19
coming soon TBA
FORTHCOMING
Doepfer A-188-1YV 256 Stages BBD Delay Module (vintage edition)
coming soon TBA
FORTHCOMING
Doepfer A-188-1A 512 Stages BBD Delay Module
Cat: 755392 Rel: 19 Nov 19
coming soon TBA
FORTHCOMING
Doepfer A-188-1AV 512 Stages BBD Delay Module (vintage edition)
coming soon TBA
FORTHCOMING
Doepfer A-188-1B 1024 Stages BBD Delay Module
Cat: 755394 Rel: 19 Nov 19
coming soon TBA
FORTHCOMING
Doepfer A-188-1BV 1024 Stages BBD Delay Module (vintage edition)
coming soon TBA
FORTHCOMING
Doepfer A-188-1C 2048 Stages BBD Delay Module
Cat: 755396 Rel: 19 Nov 19
coming soon TBA
FORTHCOMING
Doepfer A-188-1CV 2048 Stages BBD Delay Module (vintage edition)
coming soon TBA
FORTHCOMING
Doepfer A-188-1D 4096 Stages BBD Delay Module
Cat: 755398 Rel: 19 Nov 19
coming soon TBA
FORTHCOMING
Doepfer A-188-1D 4096 Stages BBD Delay Module (vintage edition)
coming soon TBA
FORTHCOMING
Doepfer A-188-1 BBD Delay Module
Cat: 755401 Rel: 19 Nov 19
coming soon TBA
FORTHCOMING
Doepfer A-188-1V BBD Delay Module (vintage edition)
Cat: 755402 Rel: 19 Nov 19
coming soon TBA
FORTHCOMING
Doepfer A-190-3 USB MIDI To CV & Gate Interface Module
Cat: 755408 Rel: 19 Nov 19
coming soon TBA
FORTHCOMING
Doepfer A-190-3V USB MIDI To CV & Gate Interface Module (vintage edition)
coming soon TBA
FORTHCOMING
Doepfer A-192-2 Dual CV & Gate To MIDI & USB Interface Module
coming soon TBA
FORTHCOMING
Doepfer A-196 PLL Phase Locked Loop Module
Cat: 755416 Rel: 19 Nov 19
coming soon TBA
FORTHCOMING
Doepfer A-198 Trautonium Manual Ribbon Controller & Module
coming soon TBA
FORTHCOMING
Doepfer A-198 Trautonium Manual Ribbon Controller Module (module only)
coming soon TBA
FORTHCOMING
Doepfer A-190-8 USB MIDI To Sync Interface Module
Cat: 755412 Rel: 19 Nov 19
coming soon TBA
FORTHCOMING
Intellijel Tete Module
Cat: 747529
coming soon TBA
FORTHCOMING
Doepfer A-188-1X 128 Stages BBD Delay Module
Cat: 755388 Rel: 19 Nov 19
coming soon TBA
FORTHCOMING
Doepfer A-188-1XV 128 Stages BBD Delay Module (vintage edition)
coming soon TBA
FORTHCOMING
Doepfer A-189-1 VBM Voltage Controlled Bit Modifier & Bit Cruncher Module
coming soon TBA
FORTHCOMING
Doepfer A-190-2 MIDI To CV & Gate Interface Module
Cat: 755407 Rel: 19 Nov 19
coming soon TBA
FORTHCOMING
Birdkids Raven Analogue Synthesiser Voice Module
coming soon TBA
FORTHCOMING
Black Corporation Deckard's Voice Module
coming soon TBA
Items 1 to 40 of 40 on page 1 of 1

Filter

Synth modules
商品
Release Date
Featured
Close