安全购物

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

安全购物

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Synth modules

首页  Equipment  

Synth modules

Options
Items 1 to 50 of 929 on page 1 of 19
1  2  3  ...  19  »
Subscribe to our weekly Studio Equipment emails
FORTHCOMING
Zlob Modular Entropy Expander Analogue Random Voltage & Noise Generator Module
Zlob Modular Entropy Expander Analogue Random Voltage & Noise Generator Module (analogue random voltage & noise generator synth module)
Cat: 793160 Rel: 31 Dec 20
 
expansion
Notes: The Entropy Expander is a 3hp Analog Random Voltage Generator that expands upon the features of the Entropy Euroack Module. Available as a Eurorack DIY Kit, PCB and Panel, or Built Module.

The Entropy+Expander packs together some of the most random voltage options in 6hp. It provides a controllable "Glide"(slew) out for the S/T\H, a comparator with a controllable rate("Thrsh") of random gates("Rand Gate") out with an input to compare other waveforms(Comp In, inserting a cable into here breaks the white noise normalization), and high pass filtered white noise resulting in approximate "Blue noise" (+3db/octave) and "Violet noise"(+6db/octave) outs.

The unique part of the circuit is a voltage controlled A/B switch thats normalled to the "Rand Gate" out that's switching between the S/T\H out(left Blue led window)and Infra out(right Red led window), the Glide control also effects the S/T\H coming out of the switch so you can get really random results from the "Entropy Out." Inserting a cable into "Switch CV In" breaks the random gate normalization and lets you toggle between A/B(left S/T\H out and right Infra out, indicated by the led windows) with your own gate or trigger.

There is a jumper on the pcb to select if you want glide on the s/t\h at, Entropy out, or un-slewed operation. There is also a trimmer for setting the amplitude of the incoming signal at "Comp In" which sets the frequency range of random gates. This may have to be adjusted depending on your Entropy version.

The random gate range can also be set up more as a noise oscillator by turning the pcb trim(clockwise) up or it can be set so random gates are extremely slow(trim counter clockwise) with minutes between random gates.
Read more
MRP:$91.18 SAVE 17%
coming soon $75.98
FORTHCOMING
Zlob Modular Mineq Simple 3-Band Equaliser Module
Zlob Modular Mineq Simple 3-Band Equaliser Module (simple 3-band equaliser synth module)
Cat: 793166 Rel: 31 Dec 20
 
3-band Equalizer Eurorack module
Notes: The MinEq is a 2hp simple 3 Band Equalizer Eurorack Module available as a Eurorack DIY Kit, PCB and Panel, or Built Module.

It provides boost or cut control over the Low, Mid and High frequency bands of an audio input. The circuit is capable of up to 20vpp~ of boost(with a 10vpp signal) and attenuation down to 1-2vpp depending on the input. The frequency bands are centered near 50Hz(Low), 1kHz(Mid), and 10kHz(High). The circuit is AC coupled and will invert the input. With all the potentiometers at noon, the MinEq passes the signal relatively unaltered. The only SMD component is the IC.
Read more
MRP:$84.67 SAVE 17%
coming soon $70.55
FORTHCOMING
Zlob Modular Vnicursal VCA 6-Channel Voltage Controlled Amplifier Module
Zlob Modular Vnicursal VCA 6-Channel Voltage Controlled Amplifier Module (6-channel voltage controlled amplifier synth module)
Cat: 793167 Rel: 31 Dec 20
 
6-channel VCA module
Notes: The VnIcursal VCA is an 8hp 6 Channel VCA Eurorack Module available as a Eurorack DIY Kit, PCB and Panel, or Built Module.

It the smallest, most compact Voltage Controlled Amplifier in the Eurorack market. It provides 6 OTA(LM13700)-based DC Coupled Linear VCAs for Audio or CV. The 6 VCAs are summed together so it can be used as a voltage controlled mixer. Each VCA is normalled to the sum so they can be removed from the mix and used on their own. The potentiometers control the amount of gain, and when a voltage is inserted into the CV in the potentiometers act as attenuators. With a control voltage of 5 volts the VCA will be at unity gain, anything above that can clip the input. LED brightness with or without CV in provides constant feedback of each channels amount of gain.

The VnIcursal is not a perfect scientifically spec'd VCA. Analog VCAs can only close so much, or be so silent. In certain situations based on power supplies and gain stages the VCA can experience some bleed or noise mainly at the sum out as all channels are passively summed then buffered.


Read more
MRP:$325.65 SAVE 17%
coming soon $271.37
FORTHCOMING
Zlob Modular Minimix User Configurable 3-Channel Mixer Module
Zlob Modular Minimix User Configurable 3-Channel Mixer Module (user configurable 3-channel mixer synth module)
Cat: 793175 Rel: 31 Dec 20
 
3-channel user configurable mixer module
Notes: Minimix is a Simple 2hp 3 Channel Unity Gain Audio or Control Voltage Mixer Eurorack Module available as a Eurorack DIY Kit, PCB and Panel, or Built Module.

Version 2 adds jumper selectable AC or DC coupling and linear or logarithmic operation for each channel. The newly revised MiniMix is now all through hole and aimed more to the beginner solderer. There is also a trimmer on the PCB to increase the master gain up to 2 or more for all 3 channels.

The module ships with a black and white reversible pcb panel.
Read more
MRP:$91.18 SAVE 17%
coming soon $75.98
FORTHCOMING
Zlob Modular Miniatt Dual Summed Mute Attenuator Module
Zlob Modular Miniatt Dual Summed Mute Attenuator Module (dual summed mute attenuator synth module)
Cat: 793177 Rel: 31 Dec 20
 
Dualsummed mute attenuator module
Notes: MiniAtt is a 2hp Dual Passive Attenuator, Offset Generator, Mixer, and Mute Eurorack Module available as a Eurorack DIY Kit, PCB and Panel, or Built Module.

The newest 666 version can be powered and will provide Offset of 0-5V with nothing plugged into the "IN" for each channel controlled by each respective Potentiometer. The "Sum Out" will also be able to send out 0-10v~ volts depending on the setting of each Potentiometer. Both channels are normalled to the sum, so inserting a signal into an "IN" will remove it from the "Sum Out. There will be signal loss at the sum out, because the module is passive. Great for cv or audio although the module ships with linear pots.

Can be used Passively or Powered.

BOM:

2 b100k song huei(tall trim pots)
2 dailywell switches sub-mini toggle spdt(on-on)
2 100k 1/4 watt 5% or 1% resistors
5 qingpu jacks(thonkiconn style)


Read more
MRP:$48.20 SAVE 17%
coming soon $40.16
FORTHCOMING
Zlob Modular SVF 2-Pole 12DB State Variable Filter Module
Zlob Modular SVF 2-Pole 12DB State Variable Filter Module (2-pole 12DB state variable filter synth module)
Cat: 793163 Rel: 31 Dec 20
 
State variable filter module
Notes: The SVF is a 4hp 2 pole 12dB State Variable Filter Eurorack Module available as a Eurorack DIY Kit, PCB and Panel, or Built Module.

It provides Low Pass, Band Pass, and High Pass outs inspired by WASP and Thomas Henry filter topologies. The filter has 2 audio inputs, but channel 2 is jumper selectable between standard audio in or Ping-able operation. The 2019 revision also adds improved cutoff and resonance response and attenuversion through the ACV IN using the above pot. CV IN provides another unattenuated voltage input to modulate the frequency.

At the CV in, +10v will open the filter completely if the cutoff pot is CCW(counter clockwise). With the cutoff knob at noon the filter can be opened with +5v or closed with -5v. CV input at the ACV in is dependent on the CV attenuverter knob.

There are also several jumper selectable modes for max resonance, self oscillation or no oscillation based on the setting of the resonance pot. According to the jumper configuration, the filter is capable of clinical and clean, to juicy and drippy, to low pass gate sounding plonks, to screaming chaotic resonance. When set to self oscillation mode, the filter can produce a sine like wave with no input and a trapezoid like wave in the max resonance jumper setting. In max resonance mode, the filter output can exceed 10Vpp. On the newest version, there is a trimmer on the top pcb to set the lowest cutoff frequency.

The new black and white pcb/panel is reversible meaning, one side is classic (first picture) and the other side is soulless (second picture).

Read more
MRP:$162.83 SAVE 17%
coming soon $135.68
FORTHCOMING
Zlob Modular Skew Fade LFO Analogue Low Frequency Oscillator Module
Zlob Modular Skew Fade LFO Analogue Low Frequency Oscillator Module (analogue low frequency oscillator synth module)
Cat: 793139 Rel: 31 Dec 20
 
Analogue LFO module
Notes: The Skew-Fade LFO is a 3hp Analog Low Frequency Oscillator Eurorack Module capable of a plethora of waveforms, available as a DIY Eurorack Kit, PCB and Panel, or Built.

It has three rate settings ranging from 3 minutes and 30 seconds a cycle up to audio range at 20 hz. Triangle waves can be skewed between ramps and saws, and square waves pulse width can be adjusted from inverted triggers to triggers. The LFO's unique feature is voltage controlled cross fading through the ("Fade C.V." in) between square/shark tooth\sine waveforms provided at the "Fade Out." All outs are also influenced by the skew knob resulting in many complicated and asymmetrical possibilities at the "Fade Out." It can even be self patched(ie triangle or square into fade cv) for an extended pallet of waveforms. The "Fade C.V." in expects a bipolar voltage 10vpp to fade from square to sine with the fade pot at noon position. Bicolor led provides constant display of positive and negative voltage crossings.
Read more
MRP:$96.39 SAVE 17%
coming soon $80.32
FORTHCOMING
Zlob Modular Triple Cap Chaos Chaotic Oscillator & Audio Mangler Module
Zlob Modular Triple Cap Chaos Chaotic Oscillator & Audio Mangler Module (chaotic oscillator & audio mangler synth module)
Cat: 793149 Rel: 31 Dec 20
 
Analogue noise oscillator/audio mangler module
Notes: The Triple Cap Chaos(C^3 Chaos) is a 2hp analog, chaos based, noise oscillator, pseudo ring modulator/harmonics generator, and audio mangler Eurorack module available as a DIY Eurorack kit, PCB and Panel, or built.

It is a unique module, like the Diode Chaos, because it has never existed as a musical instrument until now. There is also no other module to my knowledge that can do exactly what the Triple Cap can do. The circuit(with several modifications) is based on the paper "Simple Autonomous Chaotic Circuits" by J.C. Sprott and Jessica R. Piper. As opposed to the Diode Chaos that generates control voltage this module focuses on the audio rate.

The "Emanate" potentiometer controls the coarser overall spectrum of the chaos, from lots of activity counter clock wise up to less chaos and more of a steady oscillation. The "Width, CV ATT" potentiometer can be thought of as more of a fine control for the chaos/oscillator. When something is inserted into the "CV" in the voltage normalization from the width knob is broken and the potentiometer now acts as an attenuator for the incoming cv. The Triple Cap is not a traditional volt per octave exponential VCO, and has a sort of narrow frequency range to exploit the chaotic behavior.

It expects a +5v to -5v max signal in to modulate the chaos. The "IN" jack is an A.C. coupled input for audio in, although cv and audio can work for both the "CV" in jack and "IN." The "IN" will interfere and interact with the onboard chaotic oscillator depending on the frequency of the input, which may take some experimentation. It can create ring mod ish sounds, to added harmonics, to almost bit crushed sounds depending on the "X" or "Y" output. The "X" output is a more windy noisy sinusoidal based output and the "Y" output is more squared off and aggressive, harsher sounding output.

Some quirks about the Triple Cap: The "X" output can offset negatively or positively a little bit depending on the pot settings, but both outputs tend to stay around 10vpp. With the "Emanate" and "Width" pots all the way up the typical frequency will be around 150hz although some will reach 200hz at this setting. With the "Emanate" pot full counter clock wise "Width" pot full clock wise the frequency will be around 250hz. It is possible to send signals into the triple cap that can bring it out of the desired range causing the oscillation to cut out.

The Triple Cap has a double sided panel. meaning one side has the classic graphics and the other is Soulless with less graphics.

Read more
MRP:$91.18 SAVE 17%
coming soon $75.98
FORTHCOMING
Zlob Modular Push VCA Dual Summed Mute Module
Zlob Modular Push VCA Dual Summed Mute Module (dual summed mute synth module)
Cat: 793173 Rel: 31 Dec 20
 
Dual summed mute Eurorack module
Notes: The Push VCA is a 2hp 2 Channel DC Coupled Mute Eurorack Module available as a Eurorack DIY Kit, PCB and Panel, or Built Module.

It features 2 independent unity gain DC coupled VCAs with led push button mutes. A mix of both channels is available at the sum, but all outputs are available simultaneously. The newest version has normalizations to +5v, so with nothing plugged into the ins voltage can be toggled on and off at the outputs and up to 10 volts can be output at the sum. At checkout specify if you want latching or momentary push buttons. led button color may vary between red and yellow. but it will always be 2 of the same color.

Read more
MRP:$114.63 SAVE 17%
coming soon $95.52
FORTHCOMING
Zlob Modular Dual VCA Dual Summed Voltage Controlled Amplifier Module
Zlob Modular Dual VCA Dual Summed Voltage Controlled Amplifier Module (dual summed voltage controlled amplifier synth module)
Cat: 793170 Rel: 31 Dec 20
 
2-channel Voltage controlled amplifier/mixer module
Notes: The Dual VCA is a 2hp 2 channel Analog VCA and Mixer Eurorack Module available as a Eurorack DIY Kit, PCB and Panel, or Built Module.

It is a DC coupled OTA(LM13700) Dual Linear VCA based on the same fabled design of the VnIcursal VCA. The 2 VCAs are summed together so it can be used as a voltage controlled mixer at the "SUM OUT" or all 3 outs can be used separately and simultaneously. 5 volts into the CV in will provide unity gain, anything above 5 volts can clip the input.
Read more
MRP:$102.91 SAVE 17%
coming soon $85.75
FORTHCOMING
Zlob Modular Entropy Analogue Random Voltage & Noise Generator Module
Zlob Modular Entropy Analogue Random Voltage & Noise Generator Module (analogue random voltage & noise generator synth module)
Cat: 793154 Rel: 31 Dec 20
 
Analogue random voltage & noise generator Eurorack module
Notes: Entropy is a 3hp analog random voltage and noise generator Eurorack Module available as a Eurorack DIY Kit, PCB and Panel, or Built.

It features sample/track and hold normalled to white noise with a toggle switch for selecting sample (switch right position) or track (switch left position) and hold function. There is also a PCB trimmer(at the top of the motherboard) to adjust the spread(gain) of random voltages out from "scalar" (low gain, counter clock wise) to large interval jumping(high gain, clock wise). All analog white, pink, and brown (red) noise 10vpp~(dependent on lower PCB trim). Smooth (infra red) random cv out at 10vpp with 2 range settings from wiggly with (more events, switch in left position) to almost random rise and fall envelope behavior (less events, switch in right position). White noise pcb trimmer sets the amplitude of the noise which in turn influences the rate of the infra out. LED solder mask windows indicate positive(red) and negative(blue) voltage crossings.

Read more
MRP:$121.14 SAVE 17%
coming soon $100.94
FORTHCOMING
Zlob Modular Attenumixer 3-Channel Summed Attenuator Module
Zlob Modular Attenumixer 3-Channel Summed Attenuator Module (3-channel summed attenuator synth module)
Cat: 793178 Rel: 31 Dec 20
 
3-channel summed passive attenuator module
Notes: The Attenumixer is a 4hp 3 channel Passive Attenuator and Mixer Eurorack Module available as a Eurorack DIY Kit, PCB and Panel, or Built Module.

Each channel is normalled to the sum(VI) so it can be used as a 2 channel mixer and 1 channel attenuator, or a 3 channel mixer, or as 3 separate attenuators. Normalization to the sum is broken by inserting a jack into the outs of channels I-III. The Attenumixer works well with both cv and audio, although the potentiometers have a linear response. Since the module is passive there will be signal loss at the sum out.

Width: 4hp
Panel Material: Aluminum PCB
Current Consumption: 0mA

Depth:
Ships with M3 black nylon screws
Build Difficulty: Beginner
Expandable: no

BOM:

3 alpha round shaft(or similar)b100k potentiometers
3 knobs
3 100k 1/4 watt 5%(or 1%) resistors
7 qingpu jacks with nuts (thonkiconn style)
Read more
MRP:$54.71 SAVE 17%
coming soon $45.58
FORTHCOMING
Zlob Modular Diode Chaos Chaotic Voltage Generator Module
Zlob Modular Diode Chaos Chaotic Voltage Generator Module (chaotic voltage generator synth module)
Cat: 793141 Rel: 31 Dec 20
 
Voltage generator module
Notes: Diode Chaos is a 3hp analog chaotic low frequency voltage generator Eurorack Module available as Eurorack DIY Kit, PCB and Panel, or Built Module.

It is a unique module because it has never existed as an electronic music instrument until now. The module is based on a circuit from a paper called "A simple chaotic circuit with a light-emitting diode" written by Volos, Wang, Jafari, and Kapitaniak.

Diode Chaos produces 3 phases of interrelated morphing voltages including a chaotic trigger out. The range is 20-30 seconds a cycle up to audio rate, although only the X out and TRIG out go up to audio rate. The frequency is controlled by the RATE knob. Each output exhibits different behavior at different rate settings. X,Y, and Z outs like to stay in the 4vpp range although at different RATE settings the outs can reach 10vpp. The TRIG out chaotically releases 0-10v triggers although sometimes it will spit out smaller voltage peaks.

LED soldermask windows provide constant display of positive and negative voltage crossings.

Differences between chaos and random(some quoted and summarized material from Ian Fritz's site):

Chaos is "highly irregular, but still contained within a finite region (the "strange attractor")"

Chaos occurs in 3 dimensions.

Chaos needs a non-linear element (with Diode Chaos the nonlinear element is a red LED, and the chaos is directly visible and useable at the TRIG out).
Read more
MRP:$96.39 SAVE 17%
coming soon $80.32
Xaoc Devices Hel Polyphonic Voice Control Expansion Module For Odessa
Cat: 756224 Rel: 22 Nov 19
 
Expander for Odessa or other XAOC Devices polyphonic oscillators
Notes: Hel is a universal expander for polyphonic oscillator modules from Xaoc Devices, such as the Odessa. The module makes it possible to freely control up to five voices of polyphony via individual volt/octave inputs.
Read more
 2 in stock $75.98
Click for better price!
or call +44 20 7424 1960
quote 756224
Xaoc Devices Poti Batumi Breakout Expander Module
Cat: 621355 Rel: 28 Nov 16
 
Breakout expander for the Batumi quadruple LFO module
Notes: Poti is a simple but very useful breakout expander for the Batumi quadruple LFO module by Xaoc Devices. Its panel provides an immediate access to the Batumi functions originally selected by the cluster of jumpers on the back of the module: Reset/Sync mode option and selection of the assignable waveform.
Read more
 4 in stock $54.27
Click for better price!
or call +44 20 7424 1960
quote 621355
Xaoc Devices Sewastopol 2 Audio Port & Voltage Extractor Module
Cat: 676518 Rel: 15 Feb 18
 
Multi-function Eurorack module - 10HP
Notes: Sewastopol is a multifunction Eurorack module designed for easy interfacing of external gear to your modular environment. It can export line and professional level audio, import audio from instruments and electroacoustic transducers, and analyse the incoming audio to generate voltages and triggers to control your modular system.

This is a second, vastly improved revision to the original 2014 Sewastopol, featuring a completely redesigned preamplifier circuit, better ergonomics and various other improvements.
Read more
 1 in stock $245.32
Xaoc Devices Tallin 1956 Dual Discrete Core VC Amp Module
Cat: 671740 Rel: 04 Dec 17
 
Dual voltage control amplifier & overdrive - 6HP
Notes: Tallin is a dual voltage controlled amplifier (VCA) with overdrive, offering some unusual control features and a range of attractive tonal characteristics. Each of the two identical channels offers two simultaneously available inputs for voltage control over signal attenuation or gain, with linear and exponential response to CV. Volume control knobs offer manual gain settings ranging from fully closed (-80dB) up to +18dB. A colour LED indicator displays output signal levels. A soft-clip circuit avoids harsh clipping distortion, while a switchable overdrive circuit offers two carefully crafted distortion responses, simulating the sound of classic tube amplifiers.

Since both CV inputs are simultaneously active, they can be jointly exploited within patches featuring more complex volume control that otherwise would require using two traditional VCAs in series. As the signal path is DC-coupled, Tallin can also be used for handling the control voltages.
Read more
 2 in stock $151.97
Xaoc Devices Praga Voltage Controlled Stereo Mixing Console Module
Cat: 655355 Rel: 29 Jun 17
 
Voltage controlled four channel stereo mixer module
Notes: The module is built around high quality VCA chips from THAT Corp, as well as low noise opamps. It offers clickless muting and equal loudness panning. The distinct feature is that voltage control is dynamically compressed should it yield clipping when pushed too hard. Also, in both modes the attenuators offer full closing of the corresponding channel, regardless of being controlled by the CV, or not. The VCAs fully open (0dB gain) at CV=8V in Env mode and CV=5V in LFO mode. All the input and output signal levels are Eurorack levels.

Multiple Praga units can be chained thanks to dedicated headers on the back. The mixed stereo sum of each unit in the chain is added to the mixing bus of all units downstream.

A dedicated Hrad expander will offer master volume control, gate inputs for channels muting/unmuting, headphone amplifier, and voltage control over aux sends.
Read more
 3 in stock $442.88
Click for better price!
or call +44 20 7424 1960
quote 655355
Xaoc Devices Nin Zadar Expander Module
Cat: 718920 Rel: 23 Apr 19
 
Expansion module for Zadar - 3HP
Notes: An expander for Zadar, adding one more assignable input for each Zadar channel and manual triggers.
Read more
 2 in stock $56.44
Click for better price!
or call +44 20 7424 1960
quote 718920
WMD Buffered Mult Three Channel Buffered Multiple Module
Cat: 580265 Rel: 03 Aug 15
 
3 channel buffered multiple module
Notes: WMD's next utility module is a three channel buffered multiple. Each channel has a dual color LED indicating Green for a positive voltage, and Red for a negative voltage.

Each channel is normaled to the next channel for a total of nine outputs from one input.
Read more
MRP:$136.77 SAVE 37%
 More than 10 in stock $85.96
Click for better price!
or call +44 20 7424 1960
quote 580265
WMD Geiger Counter Module
Cat: 580269 Rel: 30 Jul 15
 
Geiger Counter synth module - 10HP wide
Notes: The WMD Geiger Counter is now available in the popular Eurorack Modular format and has voltage control of many features.

The Controls - The Geiger Counter may seem overwhelming, but once broken down, the controls are quite logical.

Gain - Low settings provide clean tones with no distortion at all, while high settings will brickwall your signal for great sustain. Use the Gain control as a coarse setting for getting the desired tone from the selected wave table.

Tone - The Geiger Counter's tone control blends muffled low-mids with chimey and clear upper mids and highs providing a very large range of sounds in junction with the Gain. All the way down and the sound is muffled and grungy with little upper harmonic content. The middle range is smooth and full bodied. The top range cuts the lows completely for only upper harmonic content. Use the Tone to fine tune the sound of the wave table.

Tone Enable/Disable - This switch removes the tone control from the preamp circuit. The tone control sucks some volume from the gain, and this allows the pure ultra hot signal to go directly into the Wave Table. If a very clean tone is desired, set to Disable and adjust the gain to get the right amount of breakup. For most wave tables, disabling the Tone will produce completely different sounds by brickwalling to the extremes of the tables faster.

Direct In/Level - The direct input allows a signal to be injected directly to the Geiger Counter's digital heart and bypassing the preamps coloration.

Sample Rate - Controls the length of the samples your signal is converted into. Full up and the Geiger Counter samples faster than a CD. Dial it down a little and you'll lower the fidelity and frequency response, adding overtones and difference frequencies. Down a little produces some very nice chimey clean tones. Down more and higher notes disappear into difference frequencies, all the way down to 280Hz. The sample rate is sort of like a flange whammy.

When the LED is Red, the Sample Rate is in fine mode where the range is limited to the upper end.

The CV input and attenuator are only active when a cable is plugged into the CV jack. When CV controlled, the Sample Rate knob selects the center frequency about which the CV signal moves. When the LED is Green, the Sample Rate knob is logically ANDed with the CV signal, producing some interesting sounds as the CV changes.

Bit Depth - This controls the finer details of the signal. All up and your signal is represented by the full 8 bits. Each step down cuts the resolution in half, adding quantization error distortion, all the way down to 1 bit making a nasty square wave from a once clean tone. This produces a lo-fi gated distortion sound.

The LED when Green engages Mask mode where your signal is logically ANDed to the 8 bit number produced by the Bit Depth knob. This produces uneven gaps in your signal for some interesting distortion sounds.

The Bit Depth CV and level control is only active when a cable is plugged into the Bit Depth CV input. The Bit Depth knob then controls the center frequency. However, unlike the Sample Rate control, the bit depth can wrap around the edges of the control if the CV signal is larger than the range allows for.

Wave Table - This knob and display select the wave table to run your signal through. The wave table stage takes your signal and destroys it with math. This produces some incredible sounds. The wave tables are organized so that a more extreme version is typically found one up from the current one. There are 252 wave tables in all, each with different harmonic content.

The display is in HEX, displaying the numbers 0-9 and the letters A-F. Don't be alarmed, it actually makes remembering your desired wave table easier! The wave table is remembered when the pedal is turned off.

The Wave Table CV input is similar to the Bit Depth's. The CV signal is only active when a cable is plugged in. The Wave Table will wrap around the end points 00 and FB. The center is set by the WaveTable knob.
Read more
MRP:$364.73 SAVE 29%
 2 in stock $258.34
WMD Pro Output Module
WMD Pro Output Module (synth module)
Cat: 580282 Rel: 30 Jul 15
 
Pro Output synth module with Low Distortion / Low Noise & High Headroom - 6HP wide
Notes: The WMD Pro Output is a simple and purpose built module to get your modular signal interfaced with professional and consumer audio gear. It also includes a very high quality headphone driver.

Rail to rail opamps at the input stage allow for headroom above the typical eurorack levels of 20Vpp. The Pro Output can handle 23Vpp before clipping. Signals are attenuated down to the proper levels allowing for simple adjustment free connection to any type of device, professional or consumer.

The Pro Output is DC coupled through the entire signal path, including the headphone driver. This design eliminates coupling capacitors and the distortion they can cause.

Controls and I/O:

Input - The inputs are designed to accept any normal modular level. 10Vpp is the nominal operation level. The left input is normaled to the right side for mono operation. Inputs will clip at 23Vpp, giving enough headroom for any eurorack signal.

Phones/Line - The headphone driver connects to a 3.5mm stereo jack, and a 1/4" jack for whatever type of headphones you use. It can drive both simultaneously.

The headphone output level is internally limited to protect against accidental knob turns. Connect a couple of jumpers to the rear of the module to disable this limiting. This will allow the headphone amp to drive headphones extremely loudly, but still without distortion. Output quality remains the same regardless of the jumper settings.

With the limiting enabled (jumpers off), the maximum output is around -10dBV. With limiting disabled (jumpers on), the maximum output increases to pro level, about +4dBu.

Stereo - The Stereo (-10dBV) output is designed to interface directly with consumer level gear. Hook directly to sound cards, portable recorders, and speakers. It can be used as a second headphone output but will be loud.

+4dBu Bal - These two outputs (left and right) are high quality low impedance balanced line drivers. They are designed to drive long cables and to drive balanced transformer or transformerless inputs. Use these to connect directly to mixing consoles, mic preamps, or any other piece of professional outboard gear.
Read more
MRP:$240.98 SAVE 26%
 2 in stock $178.01
WMD SSM Sequential Switch Matrix Expand Module
Cat: 580286 Rel: 29 Jul 15
 
Synth module unit for extended functionality of the SSM module
Notes: The SSM Expand 8 HP module provides extended functionality of the SSM.

Gate/Trig: Gate (Green LED lit) provides 10V outputs for each routing button. It mirrors the routing shown by the SSM LEDs. Trig mode (Red LED lit) will output a trigger when a step (CV, Step/Gate or Reset) is taken. Pushing a routing button will not change the output thus providing synchronized triggers.

Trigger Length: CV and knob provide adjustable trigger length.

Retrig on Step: When on, gates and triggers will retrigger quickly when a step is taken.

Invert Behavior: When on, routings that are OFF will produce ON triggers or Gates.

DAC3/4: Two 4 bit DAC outputs that output a weighted 4 bit voltage between 0 and 5 volts. From routing columns 3 and 4.

Step: Outputs a trigger for each step, reset or CV change that is made to the SSM.

Installation: Connect the 20 pin ribbon cable to the GTExp header on the SSM, and the ToSSM connector on the Expand. Red Stripe Down.

Specs: 8 HP. 25mm Depth. 10V Gate Outputs. Current consumption is +40mA, -3mA. 12 month warranty.
Read more
MRP:$181.06 SAVE 29%
 2 in stock $128.08
WMD/SSF Amplitude Discrete VCA With Dynamic Shape Response Module
Cat: 588810 Rel: 02 Oct 15
 
Transistor core voltage controlled amplifier (VCA) synthesiser module - 6HP wide
Notes: AMPLITUDE is a discrete transistor core VCA with a wide range of waveform saturation and distortion capability.

This module is capable of faithfully reproducing the classic warmth and fat tones associated with vintage analog synthesizers and pushes that capability to the extreme.

A novel voltage controlled linear to exponential converter is included and can be used to shape incoming control voltages to the VCA CV input and can be patched out to external modules.

Power Draw: +20mA, -20mA. 6HP width. 25mm Depth.
Read more
MRP:$175.85 SAVE 31%
 1 in stock $121.68
WMD/SSF Quad Attenuator Module
Cat: 588813 Rel: 02 Oct 15
 
Passive quad attenuator synthesiser module - 4HP wide
Notes: QUAD ATTEN is a passive quad attenuator in a small 4hp profile.

Although quite basic, attenuators are extremely powerful in a modular system.

They are especially useful for adjusting the depth of control voltages going into modules that lack CV attenuators.

Power Draw: +0mA, -0mA (Passive). 6HP width. 25mm Depth.
Read more
MRP:$84.67 SAVE 21%
 3 in stock $67.29
Click for better price!
or call +44 20 7424 1960
quote 588813
WMD/SSF Spectrum Smart Control Precision Analogue VCO Module
Cat: 588816 Rel: 02 Oct 15
 
Saw-core voltage controlled oscillator (VCO) synthesiser module - 10HP wide
Notes: SPECTRUM is a precision, saw-core VCO with eight possible waveforms (six simultaneous outputs), an eight octave switch, LFO mode and FM mode select with attenuation.

In addition to the standard waveforms; sine, pulse, triangle and saw, SPECTRUM features two selectable saw/pulse hybrid waveforms and two selectable sub-octave waveforms with variable range.

Additional features include pulse width modulation with CV and attenuation, hard sync and panel accessible 1V/OCT calibration.

Power Draw: +80mA, -55mA. 10HP width. 25mm Depth.
Read more
MRP:$306.11 SAVE 24%
 1 in stock $232.29
Click for better price!
or call +44 20 7424 1960
quote 588816
WMD/SSF Tool Box Module
WMD/SSF Tool Box Module (synth module)
Cat: 588821 Rel: 02 Oct 15
 
Collection of six useful synthesiser utilities in one module - 6HP wide
Notes: TOOL-BOX is a collection of six useful synthesizer utilities.

This module includes a two input voltage summing section, a signal rectifier, bipolar comparator, analog OR (maximum), an inverter and a voltage controlled toggle switch.

TOOL-BOX provides the tools required for spicing up your patches as well as some of the typically overlooked utilities missing from most modular systems.

Power Draw: +20mA, -20mA. 6HP width. 25mm Depth.
Read more
MRP:$174.55 SAVE 23%
 1 in stock $134.60
WMD/SSF DPLR VC Delay & Chorus Module
Cat: 588826 Rel: 02 Oct 15
 
Delay synthesiser module - 4HP wide
Notes: DPLR is a delay module with two interactive delay lines, each with 750mS of delay time.

One input is split to two delays which share overall delay time (DELAY) and regeneration (REGEN). Side B has control over its delay offset (SPREAD) from side A.

Delay, Spread and Regen are all voltage controllable. Regen at max will echo indefinitely, and can create interesting noise swashes.

The pushbutton at the top taps through seven different crosstalk configurations (Regen isolated through ping-pong). Push and hold to change through four different Regen Filter settings from very bright to dark.
Read more
MRP:$221.44 SAVE 29%
 2 in stock $157.39
WMD SCLPL Stereo 5-Band Digital EQ & Morphing Filter Module
Cat: 776823 Rel: 23 Sep 20
 
filter module
Notes: Proper surgical EQ in Eurorack format, with five parametric bands of filters for shaping sound. As usual for WMD, there's a lot of thought gone into making it versatile, doubling up as a morphing filter for mono, dual mono or stereo signals.

Supplier's Notes:
SCLPL (pronounced SCALPEL) is a Stereo 5-Band Digital EQ / Morphing Filter module for eurorack modular synthesizers. Use it to cut out problem frequencies on voices in your mix or to add pleasing enhancements to your stereo field.

Dual Mono and Stereo Control Schemes make it an excellent addition to any WMD Performance Mixer Setup. Add 4 SCLPL for 8 channels of EQ in 16HP. Put a 5th on the Master Bus and you have the ultimate eurorack mixing setup!

A simple user interface makes it a powerful tool for many use cases. It features 9 user-programmable preset slots that can then be "morphed" between seamlessly with CV or the Level knob in Morph Mode.

Each frequency band is set independently with the Level, Q, and Frequency knobs, and a helpful LED display aids in knowing exactly what's going on at all times.

Frequency bands include a Low Shelf, 3 Mid-Range Peaking Bands, and a High Shelf.
Read more
 5 in stock $247.48
Click for better price!
or call +44 20 7424 1960
quote 776823
WMD Triad Arpitecht Companion Module (black faceplate)
Cat: 760485 Rel: 06 Jan 20
 
Polyphonic CV source expander for WMD Arpitecht
Notes: A companion module to the Arpitecht,Triad sends out three static voltages to be used with three oscillators in order to create chords underneath your Arpeggios. Triad connects to the back of the Arpitecht via included ribbon cable and will adhere to the scale and transpose information set by it's master.

Triad knob and CV input set different combinations so your chord can be completely unique, while still in key with your arpeggio. Inversion switch and CV input allow you to select three different chord voicings easily.

Controls:

- Triad Knob: Selects the 3-note combination sent via CV. Becomes an offset with CV.
- Inversion Switch: Selects which inversion of the chord the Triad will play. Set at 0 for use with CV as it will "take over".

Jacks:

- Note 1,2,3: CV outputs for use with 1V/Oct inputs on 3 oscillators
- New: This output sends a trigger each time a new chord is made/selected
- Inv: CV input for the inversion selection. Accepts 0V to +5V
- Thresholds for 1st and 2nd inversions are 1.25V and 2.5V respectively
- Triad: CV input for Triad selection. Accepts 0V to +5V.

Other:

- Size: 4HP
- Connector: 20 pin ribbon cable
Read more
MRP:$123.75 SAVE 32%
 1 in stock $83.59
WMD SL3KT Three Channel Switch Module (black faceplate)
Cat: 765963 Rel: 24 Feb 20
 
three-channel switch module
Notes: SL3KT (pronounced "Select") is a simple three-channel switch module for Eurorack Modular Synthesizers.
Three independent, two-way switches allow for users two select between different sources or destinations of both CV and Audio Signals. Useful for many tasks in a Eurorack system such as sequence selecting, CV selecting, boolean logic operations, group switching, group routing, gating, waveform mixing, and so much more!
Read more
MRP:$168.04 SAVE 31%
 6 in stock $115.87
WMD 4TTEN Four Channel Attenuator & Offset Generator Module
Cat: 777841 Rel: 04 Jun 20
 
attenuator & generator module
Notes: Simple but effective four-channel module, allowing you to attenuate or offset CV or audio signals. Normalled 5V source on each channel allows you to generate a standalone CV signal without an input.

Supplier notes:
4TTEN (pronounced either ATTEN or FOUR-TEN) is a four channel attenuator and offset generator.
Use 4TTEN to attenuate any CV or audio signal by running through the ins and outs.
A +5V voltage source is normalled to each input, making it a standalone offset when there is no cable patched into an input.
Each channel is completely independent.
Ever-so-useful in live performance, we designed this module with 4 sliders for easy maneuverability, visual feedback, and enjoyable to play interface. Make your eurorack modular synthesizer system more playable with 4TTEN!
*** 4TTEN's PCB is 113mm (4.45") tall and may be a tight fit in some cases ***
Highlights
- 4 independent attenuators for Control Voltage and Audio signals
- Performance friendly sliders
- Can be used as 0 to +5V Offset
- Comfortable fader caps from the Performance Mixer
- Only 4 hp!
SPECS:
Size: 4hp
Depth: 30mm(with cables)
Power: +5mA , -5mA
Virtually no drop on 1V/Oct signals.
VERTICAL PCB LENGTH: 113mm (4.45")
IMPEDANCE = (SOURCE + 100ohm ) / 100kohm
UNBUFFERED
Read more
MRP:$123.75 SAVE 23%
 6 in stock $95.52
Click for better price!
or call +44 20 7424 1960
quote 777841
WMD Javelin Envelope Module
Cat: 784089 Rel: 15 Jul 20
 
Envlopemodule
Notes: WMD raid their back catalogue to create an ADSR envelope generator with built-in VCA. Accent features and choke options make it a versatile little module. Best Eurorack envelope ever? WMD think so.

Supplier's Notes:

Javelin is the envelope WMD have always needed to make. The best parts were taken from Multimode Envelope and combined them with the simplicity and convenience of an ADSR with integrated VCA. The tricks learned from live performance, and use of other awesome synthesizers, were put all together to create the ultimate Eurorack envelope.

Javelin starts out as a simple ADSR envelope. 3 level ranges have been added, giving you control over the envelope's overall amplitude. Next, 3 time ranges allow for quick switching of the feel of the envelope. These ranges were carefully designed to work with each other, making the switch a fun and playable part of the interface. Short and snappy, long and drawn out (max 88 minutes per stage with 5V in a stage's CV input), the Javelin will suit any style of music or playing style.

Expression is key. The addition of Accent and Choke inputs make for very interesting sequences that are just a couple gates away.

The Accent behavior is incredibly unique. Multiple consecutive gates while the Accent input is high cause the envelope to climb a bit higher with each gate, causing whatever you are controlling to accent a bit harder on each next gate. When controlling a filter, this creates a sound that can be personified with breathing, laughing, screaming, or crying, and is the key to the perfect, funky, acid style bass line. This behavior can also be disabled if you prefer a static Accent level.

As if that's not enough, the Accent input is actually a CV input which lets you use CV to effect the amount of accent with intention. 3 different accent ranges let you choose the maximum amount that the envelope will accent to. Complete control!

Reset lets you stop the envelope in it's tracks with a gate signal. This is great for using long envelope times for some steps and cutting them off for others without the need for another CV channel. However, Attack and Release also have CV inputs can can be sequenced externally. Release CV can even be routed to control Decay and Release simultaneously, a common control scheme in vintage style synthesizer envelopes.

Combining all of these methods of control on Javelin let you pinpoint the sound you are after. An absolute joy to work with.

Specs:
Size: 6hp
Depth: 38mm (with cables)
Power: +93mA, -65mA
VCA:
100k ohm input/CV impedance
1k ohm output impedance
Linear curve. 0V = off, 5V = unity
22Vpp range
Envelope: Digitally controlled analog core
Gate/Reset: 100k ohm impedance.
2V Schmitt Trigger
15us Latency (entirely imperceptible)
Attack/Release CV: 68k ohm impedance
Accent CV: 100k ohm impedance. 0-5V
Envelope Levels: 3V, 5V, 7V
Accent Levels: +32%, +42%, +48%
Max Level + Max Accent: 6V, 9.8V, 11.7V (clipped)
1k ohm output impedance
Segment Ranges (Linear)
Fast: 350us to 1.15s
Medium: 700us to 5.5s
Slow: 1ms to 23s
Slow with 5V CV: 240ms to 88 min
Read more
MRP:$243.59 SAVE 18%
 More than 10 in stock $200.81
Click for better price!
or call +44 20 7424 1960
quote 784089
WMD MSCL Stereo Compressor Module
Cat: 640972 Rel: 27 Feb 17
 
Stereo compressor in 4 HP
Notes: MSCL is a stereo compressor in 4 HP designed for your master bus to help "glue" your mix together. Inspired by the DBX "Over Easy" style compressor, it features independent attack and release knobs, output gain, and an all-in-one knob function for compression which decreases threshold, increases gain and ratio all with one turn. Limit Switch allows the MSCL to act more like a peak limiter. The threshold switch lets you compress signals of different amplitudes. It also features a side chain input for classic ducking sounds on stereo tracks.

Controls:

- Comp knob: Adjusts makeup gain, threshold, ratio simultaneously
- Attack Knob: Controls how fast the compressor will react to incoming transients
- Release Knob: Controls the speed in which the compressor will release
- Gain Knob: Adds up to +-35dB on the output
- Threshold Switch: Changes the threshold range
- Limit Switch: Limits the comp knob's makeup gain. Makes the MSCL operate more as a peak limiter

Other:

- Size: 4HP
- Input Impedance: 20k
- Side Chain Impedance 100k
- Output Impedance: 220 ohms
- RMS and Adaptive Detector Response
- Green/Red indicator for Gain/Reduction
- AC Coupled signal pass
- DC coupled bypass
- AC coupled Sidechain
Read more
MRP:$306.11 SAVE 21%
 4 in stock $242.06
Click for better price!
or call +44 20 7424 1960
quote 640972
WMD Overseer Stereo DJ Inspired Filter Module
Cat: 640977 Rel: 30 May 17
 
Stereo filter module in 6HP with high pass & low pass circuits
Notes: The WMD Overseer is a stereo filter inspired by those commonly found on DJ mixers and DJ software. It features two filters on one knob, stereo ins and outs, bypass switch, and a fun stereo "Tilt" function which offsets the filter cut-off frequency across the stereo field creating some dizzying stereo effects.

Controls:

- Bypass Switch: Turns the filter on and off. LED will be red when the filter is engaged. Toggles on button release.
- Filter Cut-off Knob (the big one): Turn Left for Low-Pass filtering and Right for High-Pass filtering. No filtering in the middle. Becomes offset with CV.
- Filter Cut-off Switch: Switched to the left limits both filters to audible frequencies so you cannot accidentally filter out all signal. Switched to the right disables the limit allowing you to filter the signal into oblivion.
- Resonance knob: Controls the amount of frequency boost at the cut-off point. Will not self-oscillate. Knob becomes offset with CV.
- Tilt Knob: In the middle applies no tilt. Rotate left or right to off set the offset to the filter cut-off on each side. Knob becomes offset with CV.
- Tilt Switch: Allows you to apply the Tilt function to either or both HP and LP. Left for LP, right for HP, centre for both.
- HP - LP Knobs: Attenuverters for incoming CV over the filters.
- HP - LP Switch: Switch to the right sends 5V to the HP - LP knobs and turns them into independent controls for the cut-off frequency of both filters, allowing you to control both filters at the same time with these independent knobs.

Jacks:

- HP: CV input for the High-Pass filter
- LP: CV input for the Low-Pass Filter
- Tilt: CV input for the Stereo Tilt function
- Res: CV input for the Resonance of both filters
- Master: CV Input over both filters, accepts -5V to +5V

Other:

- Input Impedance: 40k
- Output Impedance: 220 ohms
- Frequency Response: 20Hz to 20kHz +-1dB
- LPF Cut-off Range (-3dB Fc)
- Limited LPF: 22Hz to 32kHz
- Unlimited LPF: 1Hz to 32kHz
- HPF Cut-off Range (-3dB Fc)
- Limited HPF: 3Hz to 12kHz
- Unlimited HPF: 3Hz to 38kHz
- Signal Path: AC Coupled at all times
Read more
MRP:$325.65 SAVE 27%
 4 in stock $236.64
WMD Axxent Accent Expander Module For Metron Module (black faceplate)
Cat: 771731 Rel: 20 Apr 20
 
expander module
Notes: AXXENT is an expander module for the METRON trigger and gate sequencer and adds 16 "accent" gate outputs. Each track is specifically tied to METRON tracks, making it a very intuitive addition to any METRON sequencing ecosystem.

Use AXXENT to send signals to additional envelopes, slews, drum accents, and other gate triggered functions.

METRON will need its Firmware updated to support AXXENT.

Dimensions:
Width: 4HP (20.32mm)
Height: Eurorack 3U (128.5mm Panel, 112mm PCB behind panel)
Depth Including Cables: 43mm

Do not connect power to expansion headers.
Read more
MRP:$246.19 SAVE 26%
 2 in stock $182.35
Click for better price!
or call +44 20 7424 1960
quote 771731
WMD Time Warp Dual Channel Gated Slew Module (black faceplate)
Cat: 771732 Rel: 20 Apr 20
 
slew module
Notes: Compact dual slew module adds slide/glide to sequences in a compact format. Includes some nice added features allowing it to work as an envelope or envelope follower.

Supplier notes:
The acid style pitch slew effect has made it to Eurorack in a small easy to use package. You no longer need to dedicate more complicated modules patched in wacky ways to achieve this classic sound. Finally, a dual slew, with the right interface, at the perfect size. Add some slide and smoothness to your patches on your own accord with Time Warp.

TIME WARP is a dual channel, gated slew module with some extra features that make a powerful and versatile addition to any Eurorack Modular Synthesizer System.

Its unique, Gated Slew function allows users to add slew to any voltage signal at designated times by sending it a gate signal from a sequencer or similar source. Switch it up with Invert Logic on the gate input, or use the switch as a real time performance tool for hands-on control over when the slew will take place.
With two modes of symmetry and a full wave rectifier on the input, Time Warp can function as 2 independent Slews, two A/R Envelopes with tied controls, or even as an envelope follower, taking audio and turning it into a useful envelope signal. CV control over the Rate of slew! Time warp puts all of that in a compact, 4hp package.

Size: 4hp (20.32mm)
Depth: 30mm(with cables)
Power: 50mA +12V, 50mA -12V

Gate Inputs:
100k ohm impedance
2V threshold Schmitt Trigger
Patching into the Gate input disables the Full Wave Rectifier

CV Outputs:
470 ohm impedance, zero-impedance compensating buffer
1V/Octave no drop
22Vpp range
Gain error: 0.1% maximum. 0.025% typical.
Offset error: 1.5mV maximum. 0.5mV typical.

Regulatory:
RoHS, CE, & WEEE Compliant
Made with Lead Free solder and processes
Read more
MRP:$207.11 SAVE 19%
 6 in stock $167.16
Click for better price!
or call +44 20 7424 1960
quote 771732
WMD Performance Mixer Module
Cat: 665765 Rel: 14 Nov 17
 
Eight-channel mixer module designed especially for live performances & jam sessions - 40HP
Notes: A game changing mixer for live performance within the Eurorack modular synth ecosystem.

The Performance Mixer is an 8 channel audio mixer designed specifically for live performance and jam sessions within the modular ecosystem. With 12 audio inputs for the first 6 channels, and 2 true stereo channels, there is plenty of room for all your modular signals and more.

2 mono auxiliary sends with dual mono returns, stereo send and return, and another set of stereo mix inputs give you the routing you need to send signals to interesting effects as well as utility uses such as bus compression and master equalizers.

Tired of not being able to tune oscillators and program sequencers on the fly? Not to worry, the performance mixer also includes a cue mix section so you can monitor your incoming signals in headphones before sending them to the front of house mix. Just like on a traditional DJ mixer, the cue mix knob determines how much of the cue vs the FOH mix you hear in the phones.

Two headphone outputs for convenience and teamwork. Collaborate with friends without wasting any channels by sending the stereo output of their mixer into the unity gain mix input. Monitor with the dual headphone outputs and you can both hear the entire mix.
Read more
MRP:$905.31 SAVE 29%
 4 in stock $638.26
WMD PM DB25 Direct Outs Expander For Performance Mixer Module
Cat: 665768 Rel: 15 Feb 18
 
Expander module for the WMD Performance mixer
Notes: PM Db25 is a proprietary expand module for the WMD Performance Mixer that allows for direct access to each output, balanced, including channels expand and the main outs. Connect a Db25 snake to your choice of connector on the other end and record each individual out without destruction from the faders or mutes. Reference the stereo recording while making final edits in your DAW or tape machine.
Read more
MRP:$306.11 SAVE 26%
 2 in stock $226.86
Click for better price!
or call +44 20 7424 1960
quote 665768
WMD Chimera Percussion Synthesizer Module
Cat: 664480 Rel: 11 Oct 17
 
Percussion module using granular synthesis - 8HP
Notes: The Chimera, pronounced "kai-meer-ah", is WMD's first percussion synthesizer module for Eurorack.

First, they recorded samples of different metallic hits to create the sonic signatures that they call Surfaces. The sources include tambourines, sleigh bells, drill bits, wrenches, shell casings, coins, chains and stomp box enclosures.

Second, they built a proprietary granular synthesis engine around the sonic signatures with the goal of making a module that could sound like a human hitting and shaking a tambourine. With the fundamentals finished, they tweaked the control ranges, built the post-engine effects, and bomb-proofed the hardware.

From there they pushed and polished the engine and user experience, squeezing every juicy drop out of 8HP.

Humanistic shakers, drum machine tambourines, laser guns, minimal techno offbeats, giant-robot movie sound design, etc. It's all yours with the Chimera.
Read more
MRP:$325.65 SAVE 27%
 3 in stock $236.63
WMD DVCA Digital VCA Module
Cat: 696393 Rel: 06 Aug 18
 
Dual channel digitally controlled VCA - 4HP
Notes: The DVCA is a redux of the classic WMD Digital VCA module, giving it more features while reducing its size and power consumption.

Channel A is now unipolar/bipolar switchable, allowing for use as a bipolar VCA.

With control parameters for bias and CV, users can create classic ring modulation and attenuversion effects. Channel B still has the character and features of the Digital VCA.
Read more
MRP:$240.98 SAVE 20%
 1 in stock $193.21
Click for better price!
or call +44 20 7424 1960
quote 696393
WMD TRSHMSTR Bandpass Filter & Distortion Module (black faceplate)
Cat: 742231 Rel: 21 Aug 19
 
Versatile band-pass filter - 12HP
Notes: TRSHMSTR is a collaborative effort between WMD and electro-dance heavyweights MSTRKRFT. TRSHMSTR features an aggressive combination of band-pass filtering (FLTR) and distortion (DRV). The FLTR and DRV sections can be used independently or together to produce a wide variety of tone-shaping, from subtle distress to full-on acid destruction. The INs and OUTs of the FLTR and DRV sections are cross-normalled, so you can run your signal through FLTR and into DRV or vice-versa with no extra patching.
Read more
MRP:$280.06 SAVE 24%
 1 in stock $212.75
Click for better price!
or call +44 20 7424 1960
quote 742231
WMD Voltera Voltage Expander For Metron Module
Cat: 742232 Rel: 16 Dec 19
 
4HP voltage expander module for the METRON trigger & gate sequencer
Notes: Expander for WMD's Metron, a 16-channel trigger and gate sequencer module. Adds four tracks of voltage sequencing per module, turning the Metron into an even more powerful sequencer

Supplier notes:
Voltera is a voltage expander module for the METRON trigger and gate sequencer and adds 4 bipolar voltage tracks in 4hp. Up to 16 Volteras can be added to a single METRON giving you up to 64 CV Sequencing lanes for your Eurorack modular system!

With independent voltage ranges and quantize settings per track, Voltera allows for real time control over 4 different parameters at once, allowing you to dial that track to the parameter you are sequencing.

Sequence melodies, modulate parameters, and more with ease by adding Voltera to your METRON set up.
Read more
MRP:$240.98 SAVE 26%
 More than 10 in stock $178.01
Click for better price!
or call +44 20 7424 1960
quote 742232
WMD AXYS Stereo Crossfader Module
Cat: 737960 Rel: 21 Aug 19
 
All-analogue dual stereo crossfader - 6HP
Notes: Stereo patching is becoming more common each day in the Eurorack Modular Synth System and we here at the shop are performing out a ton. Over the past couple years we consistently felt the need for a simple crossfader module that would allow users to switch between two stereo sources, add a stereo effect path, or easily mix a mono source with a stereo one. AXYS was born from this need.

Each crossfader features stereo inputs with normalling for mono to stereo uses as well as independent CV control. Control both crossfaders with one CV easily and decide how the Y will react to X's CV.

Easily transition between two performers similar to a DJ transitioning between decks with one channel and add some master buss effects with the other. Use one channel for adding stereo effects and the other to dial up some nice parallel compression. Perfect for live performance and momentary effect blasts. A simple easy to use module with tons of uses.

All analogue signal path keeps your tone intact and sounding the way you intended it to.
Read more
MRP:$280.06 SAVE 23%
 1 in stock $214.93
Click for better price!
or call +44 20 7424 1960
quote 737960
Winter Modular EME Eloquencer MIDI Expansion Module (black)
Cat: 785050 Rel: 27 Jul 20
 
MIDI expansion module
Notes: EME (Eloquencer MIDI Expansion) is the perfect companion for the Eloquencer, adding capabilities to sync with MIDI devices, control most of the eloquencer parameters with MIDI interfaces, generating MIDI voices from the eloquencer tracks, and converting MIDI signals to the eurorack world.

Description:
MAIN FEATURES
IN / OUT
DIN-5 MIDI Input, DIN-5 MIDI Output, USB Host.

BUTTONS
4 freely assignable buttons. They can be assigned to:

Next/previous pattern
Next/previous part
Direct access to Pattern mode, Play parts, Duplicate, Project, Gate REC, CV Key REC, MIDI key REC, Free Play...
Save current project
Random 1 to 3 layers of selected track
Reset LFO of selected track
On/Off LFO of selected track
Freeze
Revert
Fill A to H or selected track
Mute A to H or selected track
DJ Nudge FWD/BCK fine/coarse

MIDI CLOCK
Eloquencer can receive 24ppqn sync from MIDI device from its DIN-5 MIDI Input, and can send 24ppqn MIDI clock through its DIN-5 MIDI out.
When working as 'internal' it will send the internal clock to the MIDI output.
When working as 'external' will send the eurorack incoming clock to the MIDI output transformed into 24ppqn.

MIDI OUT
The Eloquencer tracks can be independently assigned to:
- Voice events (note on/off, velocity, ch pressure...) For example Track A can be assigned to Channel 1 Note on/off and Track B can be assigned to Channel 1 Velocity, so track A gates and CV control Channel 1 notes and pitch, and track B controls Channel 1 Velocity.
- Control Change (CC)
- Program Change (PC)

The gate and CV output will work as usual when a MIDI OUTPUT is assigned, so voices can be doubled using the modular and an external synth.

There's a particular execution order for MIDI out events, so the first to be launched is the Program Change, followed by the CC and then the voice events. This way, we can launch program changes before the note on message is received allowing preset changes for each step.

MIDI IN
Both, the DIN-5 MIDI in and the USB can be used to change eloquencer parameters using controllers or to introduce notes in REC MODE using a keyboard.

There are 3 different groups of controls associated to MIDI channels:
- Channel : 8 MIDI channels to control parameters of specific tracks from A to H
- Global : 1 MIDI channel to control Global parameters.
- Focus: 1 MIDI channel to control the parameters of the currently selected track (track in focus). That means that if Track A is selected and we send CC 38, we will be shifting track A, but if we select track B and we send the same CC 38, we will be shifting track B.

When using the USB host input, the EME can send feedback information in case the controller that is being used has LEDs to be updated.

There is a big amount of eloquencer parameters that can be controlled using an external MIDI interface / controller. For example:

Non-destructive track parameters addition/subtraction (CV, CVP, CVR, GL GLP, R...)
Track length
Step mode / Step mode DIV / Step mode REP
Track shift
LFO on/off / Type / Length / amplitude.
Fill
Mute
Random
CV Gate link
Scale group and root
Tempo
DJ Nudge
Shuffle
Clock out
Play / Stop
Direct access to modes (Pattern, Project, Live REC...)
MIDI INTERFACE

A MIDI Channel can be assigned to an Eloquencer Track, so the gate and CV outputs will stop listening to what is sequenced and start listening all note on/off messages coming from the chosen MIDI channel.
Read more
MRP:$230.56 SAVE 23%
 1 in stock $178.03
Winter Modular Eloquencer Sequencer Module (black)
Cat: 785042 Rel: 27 Jul 20
 
Sequencer module
Notes: Nicely creative sequencer module based around controlled randomness. Build patterns and then morph them in real time. Great for live performance as well as studio use.

Supplier notes:
The Eloquencer is a powerful and versatile eurorack sequencer that can be used both as a performance and a composition tool. It's designed to be intuitive, easy to use, and quick to edit. It has been built around the "controlled chance" concept. This means you can decide when and where there will be randomness and how much this randomness will affect your sequences. It features 8 tracks of CVs and Gates in a 16 step disposition, but with the ability to define larger bar counts or chaining patterns to build multiple song parts of 256 steps each.

INPUTS AND OUTPUTS
8 V/oct CV Output
8 Trigger / Gate Output
Reset Input
External Clock Input (configurable. i.e: can be used as a clock divider / multiplier)
Accent Output (configurable)
Clock Output (configurable. i.e: can be used as a clock divider / multiplier)
2 CV Input (assignable to different parameters)
Read more
MRP:$773.74 SAVE 23%
 4 in stock $597.02
Winter Modular EME Eloquencer MIDI Expansion Module (silver)
Cat: 785053 Rel: 27 Jul 20
 
MIDI expansion module
Notes: EME (Eloquencer MIDI Expansion) is the perfect companion for the Eloquencer, adding capabilities to sync with MIDI devices, control most of the eloquencer parameters with MIDI interfaces, generating MIDI voices from the eloquencer tracks, and converting MIDI signals to the eurorack world.

MAIN FEATURES:
IN / OUT: DIN-5 MIDI Input, DIN-5 MIDI Output, USB Host.

BUTTONS:
4 freely assignable buttons. They can be assigned to:

Next/previous pattern
Next/previous part
Direct access to Pattern mode, Play parts, Duplicate, Project, Gate REC, CV Key REC, MIDI key REC, Free Play...
Save current project
Random 1 to 3 layers of selected track
Reset LFO of selected track
On/Off LFO of selected track
Freeze
Revert
Fill A to H or selected track
Mute A to H or selected track
DJ Nudge FWD/BCK fine/coarse
MIDI CLOCK
Eloquencer can receive 24ppqn sync from MIDI device from its DIN-5 MIDI Input, and can send 24ppqn MIDI clock through its DIN-5 MIDI out.
When working as 'internal' it will send the internal clock to the MIDI output.
When working as 'external' will send the eurorack incoming clock to the MIDI output transformed into 24ppqn.

MIDI OUT
The Eloquencer tracks can be independently assigned to:
Voice events (note on/off, velocity, ch pressure) For example Track A can be assigned to Channel 1 Note on/off and Track B can be assigned to Channel 1 Velocity, so track A gates and CV control Channel 1 notes and pitch, and track B controls Channel 1 Velocity.
Control Change (CC)
Program Change (PC)

The gate and CV output will work as usual when a MIDI OUTPUT is assigned, so voices can be doubled using the modular and an external synth.

There's a particular execution order for MIDI out events, so the first to be launched is the Program Change, followed by the CC and then the voice events. This way, we can launch program changes before the note on message is received allowing preset changes for each step.

MIDI IN
Both, the DIN-5 MIDI in and the USB can be used to change eloquencer parameters using controllers or to introduce notes in REC MODE using a keyboard.

There are 3 different groups of controls associated to MIDI channels:
Channel : 8 MIDI channels to control parameters of specific tracks from A to H
Global : 1 MIDI channel to control Global parameters.
Focus: 1 MIDI channel to control the parameters of the currently selected track (track in focus). That means that if Track A is selected and we send CC 38, we will be shifting track A, but if we select track B and we send the same CC 38, we will be shifting track B.

When using the USB host input, the EME can send feedback information in case the controller that is being used has LEDs to be updated.

There is a big amount of eloquencer parameters that can be controlled using an external MIDI interface / controller. For example:

Non-destructive track parameters addition/subtraction (CV, CVP, CVR, GL GLP, R...)
Track length
Step mode / Step mode DIV / Step mode REP
Track shift
LFO on/off / Type / Length / amplitude.
Fill
Mute
Random
CV Gate link
Scale group and root
Tempo
DJ Nudge
Shuffle
Clock out
Play / Stop
Direct access to modes (Pattern, Project, Live REC...)
MIDI INTERFACE

A MIDI Channel can be assigned to an Eloquencer Track, so the gate and CV outputs will stop listening to what is sequenced and start listening all note on/off messages coming from the chosen MIDI channel.
Read more
MRP:$230.56 SAVE 23%
 1 in stock $178.03
FORTHCOMING
Wavefonix 3340 Low-Frequency Oscillator Module
Cat: 796483 Rel: 14 Dec 20
 
Low-frequency oscillator module
Notes: Wavefonix's 3340 Low-Frequency Oscillator (LFO) utilises the original CEM3340 (Rev. G) architecture, similarly to the 3340 VCO.

It is a voltage-controlled LFO featuring three simultaneous, buffered 10Vpp (i5V) waveforms including DC-coupled ramp, triangle and pulse outputs.

The pulse output has a controllable PW, along with a PWM CV input (i5V range). The PW can be varied manually between 50% and 100% duty cycle with the PW knob on the front panel. When a PWM CV source is input, the PW is normalled to 50% and the CV level is attenuated using the PW knob.

Other features include a controllable FM input that is also calibrated to 1V/octave when the FM knob is fully-clockwise. So the LFO can also be used as a limited VCO. A comparator-based reversing type sync input also allows the LFO to be synced to another LFO or VCO etc.

The overall frequency range of the LFO is approximately 0.03Hz to 4.5kHz. Coarse and fine frequency knobs provide a maximum frequency adjustment range of approximately 0.03Hz to 1kHZ (this range is adjustable using a trimmer on the PCB).

Specifications

Format: Eurorack
Width: 10hp
Depth: approx. 40mm
Power consumption:
+12V: 60mA
-12V: 40mA
+5V: 0mA
Read more
coming soon $143.27
FORTHCOMING
Wavefonix 3320 Low Pass Filter Module
Cat: 796485 Rel: 14 Dec 20
 
Low -pass filter module
Notes: The 3320 Low-Pass Filter (LPF) is a four-pole, 24dB/octave filter, utilising the AS3320 IC (based on the highly regarded CEM3320) and offers a fully-featured take on a classic design.

Specifications

Format: Eurorack
Width: 10hp
Depth: approx. 40mm
Power consumption:
+12V: 30mA
-12V: 60mA
+5V: 0mA
Read more
coming soon $143.27
FORTHCOMING
Wavefonix 2144 Low Pass Filter Module
Cat: 796491 Rel: 14 Dec 20
 
Low pass filter module
Notes: The 2144 Low-Pass Filter (LPF) features the SSI2144 IC, which is based on the legendary SSM2044 filter architecture used in many classic synthesizers.

With its unmistakably silky-smooth top-end and liquid-like mid-range; it is widely regarded as being one of the best sounding filters ever made.

A wide range of modulation possibilities also adds versatility.

Specifications

Format: Eurorack
Width: 10hp
Depth: approx. 40mm
Power consumption:
+12V: 30mA
-12V: 30mA
+5V: 0mA
Read more
coming soon $143.27
Items 1 to 50 of 929 on page 1 of 19
1  2  3  ...  19  »

Filter

Synth modules
商品
Release Date
Close