安全购物

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

安全购物

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Synth modules

首页  Equipment  

Synth modules

Options
Items 1 to 50 of 1,001 on page 1 of 21
1  2  3  ...  21  »
Subscribe to our weekly Studio Equipment emails
ADDAC System ADDAC807A&B VC Stereo Summing Mixer Module (sold as pair) (black faceplate)
Notes: All you could ever dream of from an Eurorack console, and then some.

The ADDAC807A VC Stereo Summing Mixer offers you the power, the flexibility and the gorgeous layout of a high-end audio console, in the popular Eurorack format. Starting off at 5 stereo channels, with the option to add 4 additional stereo channels via the ADDAC807C Expansion Console, its send/return options and clever matrix will ensure you have that perfect mix down in seconds. Customary to ADDAC System designs, there is enough CV control and hands-on switch options to make the ADDAC807A into an instrument in and of itself.

The ADDAC807A is accompanied by its sibling, the ADDAC807B Inputs Console. We decided to allow the user to freely define the placement of the jacks by separating the area where all your cables are located. Less clutter means more hands-on control and higher playability. The ADDAC807B Inputs Console holds all the jack inputs for the ADDAC807A Main Console, along with CV inputs and additional channel settings cause you can never have enough switches.

MECHANICAL:
Format: Eurorack
ADDAC807A Width: 56 HP
ADDAC807B Width: 24 HP
Depth: 4.5 cm
Weight: 1.5 kg (3.3 lb)

CONTROL VOLTAGE I/O:
CV inputs: i 5v

ELECTRICAL:
Max current: 650mA on each rail
Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
MRP:$1,601.80 SAVE 10%
 1 in stock $1,440.16
Rossum Electro-Music Assimil8or Multi Timbral Phase Modulation Sampler Module
Cat: 676299 Rel: 12 Apr 18
 
CV/Gate-controllable sampler - 28HP
Notes: ***Now featuring Assimil8or Software Version 2.0! Available to download here: http://www.rossum-electro.com/products/assimil8or/

The ASSIMIL8OR is a CV/Gate-controllable sampler with eight independent channels. Each channel is not only its own voice, but also has a separate audio output and a gate/trigger and three CV inputs. Given ever get two sample inputs and main outputs. Thus, Stereo Sampling and playback is possible. Mixed operation of stereo or mono is possible and is limited only by the maximum number of eight channels or parts.

The ASSIMIL8OR works with high-quality 24-bit AD and DA converters. Internally, however, sample and bit rate for lo-fi sound can be lowered, the latter is even CV-controllable. The samples can also be otherwise manipulated in many ways. Thus, the phase of a sample via CV or a different sample can be modulated. Likewise, the loop points can be controlled and the sample can be traversed with CV control (scrubbing), whereby wavetable similar effects could be achieved. The following parameters can be addressed via the gate / trigger and CV inputs:

- Pitch
- Level
- Bit Depth
- Phase Modulation
- Pan
- Scrub
- Sample Start
- Sample Length
- Loop Start
- Loop Length
- Release Decay

Samples and presets are stored on an SD card, which is easily accessible plugged into the module front.
Read more
 2 in stock $885.82
Click for better price!
or call +44 20 7424 1960
quote 676299
Radikal Technologies Delta CEP A Semi-Modular Paraphonic Synthesiser Module
Cat: 796113 Rel: 16 Nov 20
 
Synth module
Notes: A semimodular synthesizer consists of 9 essential synthesis modules whose combination provides a very powerful and straight forward starting point into the world of Eurorack synthesizers. Let's see, which modules are included in Radikal's latest brainchild: The system includes one swarm oscillator, a mixing stage with a noise source, a very powerful filtering section around the analog multimode filter plus stereo digital emulations of 12dB multimode and 24 dB ladder filters and one VCA. One LFO and one snappy envelope generator for modulation purposes plus the secret weapon of all Radikal Technologies digital modules, the SNAPSHOT INTERPOLATOR are adding extra excitement to your sonic adventures. The icing on the cake of the sound engine is a digital FX section with incredible modulated stereo delay effects including tape delay, phasing, chorus, flanging etc.!

In a modular synth system, the different sound generating and altering sections are not connected. The user has to establish all the connections that are necessary to generate sound effects and tones with patch cables. In a semimodular synth the most essential connections are hardwired. This means you can play the DELTA CEP A right out of the box. Of course you can go a step further and add your own module patching.

The DELTA CEP A has a MIDI interface, which is essential when you want to use the paraphonic mode of the Synth. The paraphonic mode let's you play chords and turns the DELTA into the perfect pad and ensemble section. The MIDI Interface has additional outputs for external modules and a special digital bus allows for controlling the SWARM OSCILLATOR RT-311 direct with notes and chords to layer additional voices in monophonic and chords mode using an external MIDI keyboard.

The SNAPSHOT INTERPOLATOR is a very unique feature in the synthesizer world. First you have the ability to store snapshots of your sound creations into the internal memory. Then you can play these snapshots sequentially for very cool sonic sequences. But that is not all. You can even create smooth transitions from one snapshot to the other for stunning sound morphing effects. Independent from the Interpolator, the snapshot memories can also be used as preset memories and are filled with sounds from our sound designers.

23 knobs, 14 buttons, 28 RGB LEDs, 14 outputs and 17 inputs - the DELTA CEP A has a great synthesis potential that can even grow by adding additional modules. The connectivity provides the freedom to use it as part of your existing Eurorack system or as an independent solo synthesizer with our special DELTA CEP A desktop case.
Read more
MRP:$1,073.63 SAVE 20%
 2 in stock $860.32
Sound Machines (arches) Universal Tactile Interface Module
Cat: 777378 Rel: 30 Jun 20
 
interface module
Notes: Modern take on an old-school concept, offering tactile control of synth parameters over MIDI, CV or USB. Built-in CV step sequencer and drum trigger sequencer make it a real all-rounder.

Supplier notes:
(arches) is Sound Machines' pinnacle in control interface for music machines.

Blending inspiration, power and ease of use, the perfect evolution of the concept of tactile controllers has been created. Built on the foundation of first class touch interfaces (LS1lightstrip and LP1lightplane), present today on thousands of eurorack systems worldwide, Sound Machines have designed a beautiful work of art and technology.

(arches) put a never seen before set of controllers at your fingertips. Sliders, lightstrips (with rec/loop capabilities), lighplanes with z-axis sensitivity and pressure sensitive buttons. Behind those state of the art touch controllers lie a high-speed microcontrollers that joins the elements to create keyboards, sequencers, arpeggiators and eventually your perfect performance setup.

Read more
MRP:$1,023.08 SAVE 19%
 1 in stock $830.38
Click for better price!
or call +44 20 7424 1960
quote 777378
Sound Machines DS1 Drumstation Module
Cat: 777374 Rel: 30 Jun 20
 
drum/lightstrip module bundle
Notes: Intended as a single-box drum instrument, the Drumstation gathers Sound Machines modules into a convenient format. Sequencing, hands-on control and drum synthesis all in one.

Supplier notes:
Meet the DS1drumstation, a bundle of our best modules enclosed in a self-powered enclosure with a lot of performance power to offer!

Enclosed in a 42hp panel, you find three of our best-selling modules: the LS1 lightstrip, the DC1drumcomputer and the SDsimpledrum. Together, they form a modular drumming powerhouse with space for patching, live performance and sound deepness.

Four LS1lightstrips perfectly match with the four CV inputs of the DC1drumcomputer allowing you to change the behaviour of the sequencer in realtime with your gestures (or your recorded CV loops!). The DC1 8 outputs can drive the SD1simpledrum instruments and also connect to a potential external eurorack system.

The DS1drumstation is perfectly compatible with eurorack standard modules and it can be re-housed into your case if you need to. Just remove 4 screws and connect the ribbon power cable!
Read more
MRP:$985.83 SAVE 16%
 1 in stock $828.16
Click for better price!
or call +44 20 7424 1960
quote 777374
ACL Multi Function Discrete VCO Module
Cat: 690905 Rel: 17 Dec 18
 
Flagship oscillator featuring ten individual waveform outputs - 26HP
Notes: We are proud to present our newest workpiece: The ACL Multifunction Discrete VCO combines a massive single saw tooth core with a strong sub oscillator - each of them with its individual wave shaper. As usual, we didn't spare any effort to bring you the best quality - from the inside right to the outside.

The module comes with saw, inverted saw, PW rectangle, triangle and sine - all important waveforms of a proper modular unit are featured. We constructed all signal paths in fully discrete design up to the outputs - but it is much more to it than just a clone of a classical VCO:

If you play with the linear detune, it is possible to create awesome "beating effects" between two or more VCOs. The direct relation between the linear detune and VCO response makes it possible to use the same frequency at every pitch - for an atmospheric, rich and alive sound.

If you play the VCO in LFO mode, the module enables to control the speed in the same way as in VCO mode. If you leave V/Oct CV, you can generate very long lasting sweeps.

Another strong feature are the big syncing capabilities: Adjust the sync amount manually or via CV between the range of sync and no sync - and surf through variable degrees from soft to hard sync.

The core should sync to all repeatable waveforms - approximately exceeding 1 V pp - but in case sync wave is important for some applications, it is possible to choose between falling and rising edge sync in order to hold the proper phase relation between the syncing and the synced wave.

The Gate Input gives you the option to reset the VCO core at the beginning of every note. This feature is highly recommended for the creation of bass and percussion patches if every attack should sound equal and systematic at each time the notes are played. The Gate Input can be used as hard-sync input as well, even in the same time with the Sync input.

You are free to modulate both the oscillator and sub oscillator rectangle wave pulse widths through their separate PWM Ins and PW pots.

On top of this, you also have the possibility to choose between different PWM "carrier" waves to change the PWM-behaviour: Rising and Falling Sawtooth will create an unsymmetrical PWM, while Triangle will create a very musical sounding symmetrical PWM.
Read more
 1 in stock $818.20
Erogenous Tones Structure Visual Synthesis Module
Cat: 700730 Rel: 03 Jul 19
 
Eurorack visual generator module
Notes: STRUCTURE is a visual generator module that is based internally on an OpenGL GLSL node based platform. It uses the concept of node structures to push visuals through the system.

STRUCTURE contains a video input system that you can select between two formats, Composite video or LZX 1V RGB (with sync applied to rear of module). The Composite input does full colour decoding. Input video can be mixed through effects, with other generators, effected with audio, etc. Input video can be NTSC or PAL, 480i. STRUCTURE auto detects and converts video inputs.

STRUCTURE contains two mirrored video outputs, both composite, selectable to NTSC or PAL 480i.

Two audio rate CV inputs can be used with audio nodes to generate audio based visuals, effects moved by audio waveform, XY plotting of audio inputs, or just used at low frequency CV inputs when not using audio nodes.

Three CV rate inputs can be used to modulate a variety of controls on each node.

All CV can be set independently to 1V or 5V expected input. Each CV has a scale control and a positive offset control for fine tuning incoming CV voltages.

A joystick can be used to modulate controls in real time, or used to record motion information that is played back in a loop. In addition, the joystick has a metal hat for nice weighted movement.

STRUCTURE can also generate 3D graphics, animate properties of the 3D objects, and allow you to map and node type to the texture of the 3D objects (like video).

Three gate inputs, usable by local buttons as well.

Three macro knobs on the top right, allow for global changes to the output node which are user configurable.

STRUCTURE has a USB input, which you can attach MIDI interfaces, MIDI keyboards, controllers, etc, or even a standard PC keyboard or numeric keypad. You can assign actions or state changes to trigger from any of these input sources.

SDCARD on front and back. Backside SDCARD stores system, front side stores user presets, images, configurations, objects, custom shaders, etc.

STRUCTURE has a full colour 320×240 preview screen which also provides lots of feedback when using.
Read more
 2 in stock $808.22
Sound Machines Modulor114 Module (black edition)
Cat: 777306 Rel: 30 Jun 20
 
analog modular synthesiser
Notes: All-in-one modular synth system designed for standalone use or integration with other Eurorack gear. Classic two-oscillator monosynth setup with an impressively deep range of features.

Supplier notes:
An all-in-one sound factory, the MODULOR114 eurorack analog modular synthesizer is our first product designed as a complete and powerful unit. A great entry ticket to the modular world for someone, a treasure trove of sounds for others, the MODULOR114 encloses the most sought-after analog textures and the modern additions that renders this product unique.

Read more
MRP:$847.46 SAVE 17%
 1 in stock $701.77
Click for better price!
or call +44 20 7424 1960
quote 777306
ADDAC System ADDAC807C VC Stereo Mixer Expansion Module (black faceplate)
Cat: 776436 Rel: 08 Sep 20
 
Mixer expansion module
Notes: The ADDAC807 VC Stereo Summing Mixer can provide up to 9 stereo channels of supreme Eurorack audio.

The main modules ADDAC807A and ADDAC807B can be expanded via the ADDAC807C Expansion Console for 4 additional stereo channels.

MECHANICAL:
Format: Eurorack
Width: 38 HP
Depth: 4.5 cm
Weight: 0.6 kg (1.3 lb)

CONTROL VOLTAGE I/O:
CV inputs: i 5v

ELECTRICAL:
Max current: 250mA on each rail
Compatible with +-12v and +-15v power supplies
Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
 1 in stock $689.59
Click for better price!
or call +44 20 7424 1960
quote 776436
Flame Curves Analogue Moving Resonance Filter Bank Module
Cat: 690788 Rel: 05 Jun 18
 
Analogue filter bank with integrated modulation sequencer - 31HP
Notes: Flame Curves is an analogue moving resonance filter bank. It includes a twelve-channel analogue filterbank and a pattern player which can be programmed with a software editor. You can use a freeware "Curves editor software" (Win/Mac) for setup and user pattern editing. The module needs a clock to run in pattern-mode. It also features a reset input to set the sequence back to the first step. The memory in the module can save up to 99 patterns. The active pattern can be seen on the display and selected thanks to two buttons.

If Curves is in sequencer mode, the Envelope potentiometer controls the AR envelope, the Variation knob adds random velocity and release, and the Fill potentiometer controls the level of all the channels.

In manual mode, when the sequencer is off, you can select different filter-types with the Variation potentiometer: allpass, lowpass, bandpass 1-3 and highpass. Thanks to the Fill knob it is possible to sweep through the twelve filter bands. The Envelope knob smooths the sweep by activating a second band next to the selected filter band. Thus, the change from one band to another is not so abrupt.

It is also possible to play the twelve filters via MIDI like a drum module, thanks to the supplied MIDI to minijack cable. It even reacts to velocity.

The twelve bands are subdivided in odd and even bands, which you can feed or tap out separately thanks to the various inputs and outputs. Try patching the odd outputs on one side and even outputs on the other side and you will get an amazing stereo effect! ALL output features a Dry/Wet and a Level potentiometer.

Additionally, the module features also a direct audio output and direct VCA input of each filter channel. Thus, it is possible to feed gate, triggers or envelopes to the VCA of various filterbands and play them independently.

Furthermore, there are several CV inputs for controlling Envelope, Variation and Fill parameters as well as the pattern number.
Read more
MRP:$858.11 SAVE 22%
 1 in stock $665.19
Intellijel Atlantis Dual Oscillator Subtractive Synth Voice Eurorack Module
Cat: 563544 Rel: 10 Mar 15
 
Dual oscillator subtractive synth voice module, 40HP wide
Notes: The Atlantis is heavily inspired by the architecture and sound of the classic Roland SH-101. It has always been one of our favorite synths and we really liked how the seemingly limited architecture allowed for all sorts of creative and musically useful sounds to be easily generated.

Just like the 101 it is quick to dial in beautifully rich bass and lead sounds. However this module uses triangle core VCOs (based on the Dixie core) instead of Saw core which respond much more musically to FM. The modulation oscillator can be used as an LFO or VCO (audio rate) and both track very precisely over 8 or more octaves.

In the mixer section you can adjust the balance of the primary oscillators waveforms including a sinewave which is normalled to the EXT IN jack. You could also patch in one of the modulation oscillators waveforms into this channel and be able to operate the Atlantis as a proper two oscillator synth. There is a switch labelled "LINK" which enables the modulation vco pitch to be based as an offset of the primary VCO. This is useful when using it as a stacked dual vco or when you have the mod VCO acting as the linear FM source for the primary vco and wish to maintain the ratio.

The filter section is a Roland style cascaded 4 pole multimode filter with LP, BP and HP modes. The LP Boost switch engages a special mode useful for the LP that produces a much fatter and prominent sound that is not drowned out by resonance (unlike the original SH-101). The filter self-oscillates to produce a very clean sine wave which also tracks 1V/Oct. Between the Mod VCO, Primary VCO, Sub Oscillator and resonating filter it is possible to layer up to four different pitches at one time.

The envelope section is an ADSR with a dual range switch. It also can be set to a looping mode which can be gated on/off externally.

The output VCA feeds into a two level output clipping circuit that you can use to get a much ballsier/dirtier sound.
Read more
 1 in stock $664.10
Endorphin.es BLCK Furthrrrr Generator Dual VCO Module (black faceplate)
Cat: 714522 Rel: 22 Jan 19
 
Dual voltage controlled oscillator (VCO) synth module - 30HP
Notes: The Furthrrrr Generator has a main oscillator (carrier) with an extensive and fully voltage controllable wave multiplier and a modulation oscillator (modulator) that can cross-modulate the carrier. Each oscillator has hard and soft sync and also features an integrated tuner: if both LEDs are lit the VCO is at note A. Left LED is lit at note Ab and right LED at A#. Frequency potentiometers are ten-turn models and thus allow for easy tuning. Frequency range of the VCOs is 10Hz-10kHz (and much lower in modulator's LFO mode). Both VCOs feature 2 frequency CV inputs (1x with bipolar attenuator, 1x with 1V/octave), one FM input (jumper selectable between linear and exponential FM) as well as separate input for hard and soft sync. The voltage characteristic can be selected between 1V/octave and 1.2V/octave (Buchla norm).

The main oscillator (carrier) outputs the waveforms sine, saw, square and white noise. The two outputs marked with the magic eye are outputs of the "harmonic section" that generates very complex sounds by the wave multiplier and its parameters symmetry, order and Furthrrrr in the module's right-hand section. Symmetry lowers the level of even harmonics and amplifies the odd harmonics (this affects the pulse wave's width as well). Order adds saturation to the high order harmonics and resembles a low pass filter. Furthrrrr alters the level of harmonics set by the other parameters and produces very interesting, partly brute sounds with lots of harmonics by clipping and folding the wave. All three parameters can be voltage controlled. The carrier oscillator also has inputs for hard and soft sync, the sync-switch can synch directly to the modulator.

The modulation oscillator (modulator) has three wave forms with direct outputs: sine, saw and square. Using the internal modulation via the "mood section" the waveform is selected with a button; an additional staircase wave form is available here, but it can be overridden by inserting a signal into the external input socket. A switch activates the LFO mode.

The Mood section is responsible for the internal modulation of the carrier by the modulator. Switches determine the modulation destination(s) that can be activated simultaneously. These are the Furthrrrr parameter of the harmonic section, the amplitude and the frequency of the carrier oscillator. The "balanced" switch activates the ring modulation between both VCOs. intensity of modulation is controlled by the "mood index" potentiometer and the according CV input with bipolar attenuator.
Read more
 1 in stock $662.98
Winter Modular Eloquencer Sequencer Module (silver)
Cat: 785047 Rel: 27 Jul 20
 
Sequencer module
Notes: Powerful Eurorack sequencer designed to work just as well in the studio as a live performance tool. Eight tracks of CV and gate based around a 16-step sequencer, with clever randomness features.

Supplier notes:
The Eloquencer is a powerful and versatile eurorack sequencer that can be used both as a performance and a composition tool. It's designed to be intuitive, easy to use, and quick to edit. It has been built around the "controlled chance" concept. This means you can decide when and where there will be randomness and how much this randomness will affect your sequences. It features 8 tracks of CVs and Gates in a 16 step disposition, but with the ability to define larger bar counts or chaining patterns to build multiple song parts of 256 steps each.

INPUTS AND OUTPUTS
8 V/oct CV Output
8 Trigger / Gate Output
Reset Input
External Clock Input (configurable. i.e: can be used as a clock divider / multiplier)
Accent Output (configurable)
Clock Output (configurable. i.e: can be used as a clock divider / multiplier)
2 CV Input (assignable to different parameters)


Read more
MRP:$788.93 SAVE 19%
 3 in stock $636.37
Click for better price!
or call +44 20 7424 1960
quote 785047
Rossum Electro-Music Trident Multi Synchronic Oscillator Ensemble Module
Cat: 718648 Rel: 20 May 19
 
Triple oscillator module with various modulation possibilities - 30HP
Notes: The latest brainchild of synth pioneer Dave Rossum, TRIDENT is a 100% analogue, triple oscillator module that opens up a universe of dynamic timbral textures.

At its most basic level, TRIDENT is three precision audio VCOs, each sporting a unique variety of control voltage inputs.

The main or "Carrier" oscillator provides its three waveforms simultaneously. The two Modulation Oscillators each have a single output and a waveform selector. The Modulation Oscillators also have a voltage controlled Symmetry parameter which varies the duty cycle of the triangle wave output from sawtooth to triangle back to time reversed sawtooth, and also varies the sawtooth output to have an upward or downward kink in the middle, as well as controlling pulse width when the pulse waveform is selected.

And while each oscillator can be used independently if desired, it's when they're combined into a synchronous ensemble that the real sonic magic happens.

That magic is what we call "Zing" modulation. Each of the Modulation Oscillators can modulate each of the Carrier outputs in an amount controlled by the Zing parameter. Zing modulation is mathematically akin to ring modulation, but due to the synchronization of the oscillators (when an oscillator's Sync button on), the harmonic sum and difference sidetones of ring modulation transform into complex but purely harmonic overtone spectra, which vary dynamically and dramatically with the frequency and waveshape modulations of the modulation oscillators. Each change in the Modulation Oscillator parameters - Frequency, Symmetry, Waveshape, Zing, and (in the case of Modulation Oscillator 2) Phase - will have a different effect on the timbre of each of the three Carrier waveshape outputs.

When the modulation oscillators are set to track the carrier oscillator, the waveshape will remain constant as the carrier frequency changes. In this case the overtone structure is determined by the settings and CV modulations of the modulation oscillators. If instead the modulation oscillators do not track the carrier, some of the overtone structure will vary relative to the carrier frequency.

What all this means is that whether musicians take advantage of TRIDENT's unique synchronous modulation capabilities (which they, of course, should), or just treat it as three superb, wide-range analogue oscillators, TRIDENT offers a vast variety of dramatic sonic textures.
Read more
 2 in stock $630.84
Click for better price!
or call +44 20 7424 1960
quote 718648
1010 Music Bitbox Mk2 Intuitive Sampling Module
Cat: 775085 Rel: 22 Jun 20
 
sampling module
Notes: Updated version of the excellent Bitbox sampler module offers more powerful sound processing and an improved touch screen. Improved effects and mixing with all the same creative power of the original.

Supplier notes:
Bitbox mk2 delivers powerful sampling and mangling for Eurorack. With this module you can add recording, sample playback, clip launching, slicing, granular sounds and musically intelligent looping capabilities to your Eurorack rig. With a 3.5 inch touchscreen, bitbox mk2 makes easy work of selecting, editing, and tweaking your samples. You can stream large samples of up to 4 GB file size straight from the microSD card. Interact with other musical components via CV and MIDI. Tweak your configurations to get them just right, then save them to multiple presets for future reuse. With the new bitbox mk2 hardware, you can now do more with the new more powerful processor.

Sample Playback
Play up to 24 polyphonic notes when your samples fit in the 64 MB of internal memory or up to 8 larger samples streaming directly from the microSD card
Configure 16 sample pads per preset as single or multi-samples, clips, slicers, granular or new recordings
Stream long samples from the microSD card with a max sample size of 4 GB, which can be many hours of audio
Trigger samples with the touch screen, CV gate inputs, or MIDI input
Use MIDI for polyphonic playback of samples or slices
Control how samples start and stop by choosing from one-shot, toggle, and gate launch modes
Tweak playback through a variety of sample parameters, including start position, length, pitch, gain, filter, loop mode, launch quantization, ADSR, Exclusive Grouping, clip synchronization, slice placement and sequencing, grain size, grain spread, grain count, and MIDI note and channel mapping

Record Eurorack level audio straight into the module:

Record samples from a stereo audio input pair
Configure each pad for stereo or mono recording with the option to synchronize the start and stop times to clock inputs
Trigger recording via audio level threshold
Create perfectly sized loops by setting the recording length
Enable immediate playback after recording for live looping capabilities
Make recordings up to 4 hours in length
Store recorded samples as WAV files on the micro SD card then remove the card to transfer them to your computer
Sample Modes
Find creative ways of using your samples with our 5 sample playback modes:

Trigger one shots or launch loops using sample mode
Load a folder of samples into a sample mode pad to improve the quality of the pitch shifting when playing a sample chromatically or to trigger different samples with each note
Play time-synchronized loops with constant pitch time shifting in clip mode
Skip between slices of a WAV using slicer mode
Create rich textures and other worldly sounds with granular mode
Inputs and Outputs
Connect up to 8 CV modulators to control numerous sample parameters
Trigger each of the 16 pads with a dedicated gate input
Record through the dedicated stereo audio input pair
Use CV to keep time through the dedicated clock input
Confidently connect with both TRS MIDI Type A and Type B, no adapter needed
Route the audio from each pad out to one of 2 stereo audio output pairs or any of the corresponding single channels
Inputs and outputs are DC coupled so you can record and play out CV signals

External Control and Synchronization
Playback can be immediate or synchronized to internal clock, TRS clock in, or MIDI clock in and out
Trigger each pad independently through a dedicated gate input
Use MIDI to trigger pads via a note per pad
Play a single or multi-sample pad pitch shifted using MIDI notes or CV
Trigger different sample slices using MIDI notes or CV
Modulate a wide variety of sample parameters through the MIDI input and up to 8 CV signals
Quickly set up MIDI modulation using Learn mode- no need to look up CC numbers
Module Features
Use the 3.5? diagonal touch screen to intuitively explore the features of the module
Get more creative with double the processing power of the original bitbox
Fill out your sound with reverb and delay
Import or export WAV files with your Mac or PC using a microSD card
Save and recall multiple presets
Increase your capacity with larger microSD cards
Select Flipped UI mode to mount the unit with the screen on the bottom and use the screen, knobs, buttons, and CV jacks as you normally would
Read more
MRP:$823.52 SAVE 24%
 2 in stock $629.72
Click for better price!
or call +44 20 7424 1960
quote 775085
Erica Synths Drum Series Drum Sequencer Module
Cat: 690935 Rel: 15 Jun 18
 
Advanced drum sequencer with 16 trigger outs - 42HP
Notes: Inspired by Roland's TR-x0x sequencers, the Drum Sequencer brings that classic approach to Eurorack, offering a massive 16 trigger channels with gate and accent outputs, plus a CV/gate track for synths.

Supplier's notes:
X0X-style beat creation for modular systems - Erica's drum sequencer is based on the concepts of classic Roland TR rhythm composers. The module offers 16 trigger channels, twelve of which also feature accent outputs. Additionally, there is a CV and a gate track, meaning you can also notate a bass line or melody. The maximum pattern length is 64 steps. Extensive playback and random functions plus two LFOs help you with creating lively results. Large buttons provide a fantastic feel while programming patterns.
Read more
 2 in stock $629.72
WMD Metron 16 Channel Trigger & Gate Sequencer Module
Cat: 709199 Rel: 08 Mar 19
 
36HP Eurorack module featuring 16 channels of trigger & gate signals
Notes: WMD Metron is an advanced trigger and gate sequencer. It features 16 channels with up to 256 steps per pattern, which you can save to an SD card. Thanks to a random pattern generation function, you will never run out of ideas! Furthermore it offers a probability-function per step which will bring your patterns to life. If you have rhythm flowing through your veins, use the recording function and just tap in patterns with the corresponding buttons. With beat repeat, ratcheting and a fill function, it is meant to be a performance sequencer but makes just as much sense in the studio. Metron: so much sequencing power in 36 HP!
Read more
MRP:$798.24 SAVE 22%
! low stock $625.29
Click for better price!
or call +44 20 7424 1960
quote 709199
Endorphin.es Furthrrrr Generator Dual VCO Module
Cat: 579172 Rel: 07 Aug 15
 
Dual voltage controlled oscillator (VCO) synth module - 30HP
Notes: The Furthrrrr Generator has a main oscillator (carrier) with an extensive and fully voltage controllable wave multiplier and a modulation oscillator (modulator) that can cross-modulate the carrier. Each oscillator has hard and soft sync and also features an integrated tuner: if both LEDs are lit the VCO is at note A. Left LED is lit at note Ab and right LED at A#. Frequency potentiometers are ten-turn models and thus allow for easy tuning. Frequency range of the VCOs is 10Hz-10kHz (and much lower in modulator's LFO mode). Both VCOs feature 2 frequency CV inputs (1x with bipolar attenuator, 1x with 1V/octave), one FM input (jumper selectable between linear and exponential FM) as well as separate input for hard and soft sync. The voltage characteristic can be selected between 1V/octave and 1.2V/octave (Buchla norm).

The main oscillator (carrier) outputs the waveforms sine, saw, square and white noise. The two outputs marked with the magic eye are outputs of the "harmonic section" that generates very complex sounds by the wave multiplier and its parameters symmetry, order and Furthrrrr in the module's right-hand section. Symmetry lowers the level of even harmonics and amplifies the odd harmonics (this affects the pulse wave's width as well). Order adds saturation to the high order harmonics and resembles a low pass filter. Furthrrrr alters the level of harmonics set by the other parameters and produces very interesting, partly brute sounds with lots of harmonics by clipping and folding the wave. All three parameters can be voltage controlled. The carrier oscillator also has inputs for hard and soft sync, the sync-switch can synch directly to the modulator.

The modulation oscillator (modulator) has three wave forms with direct outputs: sine, saw and square. Using the internal modulation via the "mood section" the waveform is selected with a button; an additional staircase wave form is available here, but it can be overridden by inserting a signal into the external input socket. A switch activates the LFO mode.

The Mood section is responsible for the internal modulation of the carrier by the modulator. Switches determine the modulation destination(s) that can be activated simultaneously. These are the Furthrrrr parameter of the harmonic section, the amplitude and the frequency of the carrier oscillator. The "balanced" switch activates the ring modulation between both VCOs. intensity of modulation is controlled by the "mood index" potentiometer and the according CV input with bipolar attenuator.
Read more
 1 in stock $620.86
AION Modular 921ABB Voltage Controlled Oscillator Bank Module
Cat: 780127 Rel: 07 Jul 20
 
Voltage controlled oscillator module
Notes: The AION 921ABB is a VCO-bank with two variable waveform generators which produces frequencies ranging from sub-audio (LFO) to 40.000 hz. Four waveforms are available: sine, triangular, sawtooth and rectangular (with variable duty cycle A.K.A. pulse width modulation).
Both oscillators are controlled by the driver on the left side of the module. 3 control inputs for frequency and 2 control inputs for PWM, as well as manual operation for frequency and pulse width. Each of the two oscillators has a frequency adjust pot, an octave switch, the 4 waveform outputs and one exponential and one linear input for frequency control. A switchable synchronization input for each oscillator completes the operability.

Frequency range:
0.01 hz - 40.000 hz

Range switch:
sub audio - 0.01 - 400 hz
audio - 1 - 40.000 hz

Scale switch:
2 or 12 octave frequency span.

Specifications:
Power: +12V (45mA) -12V (45mA)
Depth: 40mm
Doepfer compatible
Read more
MRP:$768.97 SAVE 19%
 1 in stock $619.74
Click for better price!
or call +44 20 7424 1960
quote 780127
Winter Modular Eloquencer Sequencer Module (black)
Cat: 785042 Rel: 27 Jul 20
 
Sequencer module
Notes: Nicely creative sequencer module based around controlled randomness. Build patterns and then morph them in real time. Great for live performance as well as studio use.

Supplier notes:
The Eloquencer is a powerful and versatile eurorack sequencer that can be used both as a performance and a composition tool. It's designed to be intuitive, easy to use, and quick to edit. It has been built around the "controlled chance" concept. This means you can decide when and where there will be randomness and how much this randomness will affect your sequences. It features 8 tracks of CVs and Gates in a 16 step disposition, but with the ability to define larger bar counts or chaining patterns to build multiple song parts of 256 steps each.

INPUTS AND OUTPUTS
8 V/oct CV Output
8 Trigger / Gate Output
Reset Input
External Clock Input (configurable. i.e: can be used as a clock divider / multiplier)
Accent Output (configurable)
Clock Output (configurable. i.e: can be used as a clock divider / multiplier)
2 CV Input (assignable to different parameters)
Read more
MRP:$790.26 SAVE 23%
 5 in stock $609.76
4ms SWN Spherical Wavetable Navigator Oscillator Module
Cat: 648377 Rel: 29 Apr 19
 
Six-channel synthesiser module - 26HP
Notes: The Spherical Wavetable Navigator (SWN) is a six-channel synthesiser that makes it easy to create slowly morphing drones, polyphonic melodies, evolving sequences, and rich textures.

The SWN features six wavetable oscillators with independent pitch, level, and waveform controls. Six LFOs (Low Frequency Oscillators) can be used as modulation sources and/or envelopes, making it easy to add dynamic motion to your patch. Each channel is a full voice and can be "played" using the top row of buttons, the internal LFOs, or note-change detection on the 1V/oct jacks. The SWN ships with 12 three-dimensional (spherical) wavetables and an easy interface which allows you to record and edit custom wavetables from live audio. Open-source software for Mac, Windows, and Linux called SphereEdit can be freely downloaded and allows you computer to create, edit, and convert .wav files into Spherical wavetables to transfer into the SWN with an audio cable.

New firmware available which adds extra features, visit https://4mscompany.com/p.php?p=820&c=5 for details.
Read more
MRP:$730.39 SAVE 19%
 4 in stock $592.03
Click for better price!
or call +44 20 7424 1960
quote 648377
1010 Music/MOK Waverazor Dual Oscillator Module
Cat: 740064 Rel: 09 Aug 19
 
Dual oscillator Eurorack module with patented wave-slicing design - 26HP
Notes: Proper freaky digital Eurorack business. Based on the synth plugin of the same name, Waverazor is a bonkers aggro waveshaping oscillator. Ideal for filthy bass sounds and nasty leads.

Supplier notes:
The Waverazor Dual Oscillator is a result of a special collaboration between 1010music and MOK. It is the first hardware module to bring MOK's patented wave-slicing? oscillator design to Eurorack format. Waverazor's novel approach to synthesis splices waveforms into twisted and aggressive new timbres. Featuring fresh sound generation techniques like Multi-Sync and Mutant AM, the Waverazor oscillator is perfect for biting leads, glitched-out basses, cinematic drones and everything in between.

One Waverazor Eurorack oscillator can contain up to 8 wave slices, creating a multi-segment "Frankenstein" waveform that produces extended harmonic content beyond any single wave shape. Each individual slice has independent control over wave pitch, volume, phase and DC offset, allowing a single oscillator to contain a multitude of timbral colours. Even the "Razor" itself can be adjusted, with parameters for its own slice frequency, step size multiplier and duty cycle.

The Waverazor Dual Oscillator module provides a central waveform display that allows you to visualize the output. There's an audio input for slicing up any sound you like. Four endless knobs make it possible to morph multiple parameters at once, while the touch screen enables X/Y performance controllers that allow you to manipulate the sound with the swipe of your finger. Top it all off with 20 modulation CV inputs for complete sonic insanity!

What is included:

- Waverazor Dual Oscillator Eurorack module
- MicroSD card with Waverazor firmware and patch data loaded on it
- Eurorack power cable
- Waverazor Dual Oscillator Quick Start guide
- MIDI Adapter
Read more
 2 in stock $574.29
Click for better price!
or call +44 20 7424 1960
quote 740064
ACL Dual State Variable VCF Filter Module
Cat: 665158 Rel: 18 Oct 17
 
State variable filter with 12dB slope, individual outputs & variable filter routing - 26HP
Notes: The Dual State Variable VCF consists of two multimode filters with high-pass, band-pass, notch and low-pass outputs. The circuits feature an edge steepness of -12 dB per octave. Routing options allow serial or parallel connection. Thanks to normalizations and a total of three cutoff potentiometers, stereo material can be processed as comfortably as mono signals.

Furthermore, a well-known feature from the Oberheim SEM synthesizer was implemented in the Dual State Variable VCF: The notch characteristic can be weighted more to the high-pass or low-pass side.

The resonance sounds extraordinarily rich and wet, even high values never sound all too harsh. While self-oscillating, the filters can be played like sine oscillators. By modulating both circuits in opposite direction, users are able to achieve interesting stereo effects.
Read more
 1 in stock $572.07
Radikal Technologies RT-311 Swarm Oscillator Module
Cat: 796106 Rel: 16 Nov 20
 
Swarm oscillator module
Notes: The RT-311 can store up to 8 memory setups with 8 snapshots each, holding all oscillator settings and memorizes them even after powering down your modular synth. One highlight of this module is the opportunity to interpolate between these parameter snaphots. Interpolation can be controlled with an external control voltage or with a built in LFO. The speed of the internal LFO can be controlled with an external control voltage as well. The interpolator has even an external output to interpolate one parameter of an attached module. Both oscillators can built swarms of oscillator clones. Up to 16 Oscillators are running simultaneously at the highest setting. The detune knob changes the pitch of all oscillator clones between ultra slow oscillator frequency beating effects and multiple frequency drones and chords. The swarm can be pitched in musical intervals, chords, clusters or fat detunes. The swarm tuning can be stored into the snapshots too. That allows for to built up to 8 different chords with different sound settings one can change while playing in a setup.

Both oscillator swarms have independent outputs. If one sets the exponential FM inputs depth to maximum, the inputs run with Volt per Octave scaling. The oscillator swarms can then be used like two independent Synth voices. The scale inputs can also get quantized to musical scales. That makes it easy to control the swarm from a step sequencer. Just select the root key with the tune knob and a pentatonic scale and turn the knobs of your sequencer for always matching tonal sequences.

Electrical and mechanical Specifications:

250 mA +12V
40 mA -12V
0 mA 5V
30 mm Depth
32 HP
Read more
MRP:$851.46 SAVE 33%
 2 in stock $572.06
1010 Music Synthbox Polyphonic Synthesizer Module
Cat: 663847 Rel: 12 Oct 17
 
4 note polyphonic synthesiser
Notes: Synthbox is a 4 note polyphonic synthesizer for your Eurorack system. Connect your favourite MIDI controller to synthbox and start jamming with built in presets. Use the touchscreen to choose and shape the waveforms and to apply the built in sound effects. Modulate the waves and the effects using a combination of on screen controls of envelopes, low frequency oscillators, and sequencers together with hard wired CV inputs to tweak the sound to meet your creative vision.

Series 1 Module Firmware Switching:

Because synthbox is a Series 1 module, you can swap out the synthbox firmware for other series 1 module firmware quickly and easily. This means you can switch to bitbox or fxbox firmware simply by signing up at forum.1010music.com, downloading the new firmware and following the instructions on the forum. You can also download the latest synthbox firmware to get new features and updates. It's like getting three modules in 1 with available upgrades!
Read more
 2 in stock $553.22
1010 Music Toolbox Touch Screen Polyphonic Sequencer Module
Cat: 669645 Rel: 20 Dec 17
 
Touchscreen based sequencer & function generator, designed to drive signal patterns to your other modules - 26 HP
Notes: Toolbox is a musically intelligent control module capable of driving a rack full of gear. It features both MIDI and Control Voltage connections for interfacing with all kinds of different hardware. Toolbox takes full advantage of the integrated 3.5" touch screen to give immediate access to sequences, parameters, and events. The screen provides a full overview of all the active notes and events. It even offers touch based scrolling and zooming, just like a smart phone, to make editing easy and fun. Toolbox is a great way to be creative on your terms.
Read more
 1 in stock $553.22
Click for better price!
or call +44 20 7424 1960
quote 669645
Serge Modular 8-Stage Sequencer & Programmer Module
Cat: 757144 Rel: 16 Oct 20
 
Sequencer & programmer module
Notes: The SEQ XL is a modern incarnation of Serge's analog sequencer / programmer. 8 stages. 2 rows of CV output. A - B (A minus B) outouts the difference between A and B (-5 to 5V range). The length of sequences can be set via the pushbuttons - while a sequence is running. RESET, UP/DOWN, HOLD inputs. Switch to start / stop the sequencer. PULSE STAGE SELECT inputs allow selecting specific stages. great at audio rates. ALL GATE output goes high when any button is pressed (or a stage is selected by a pulse input) and allows the use of the SEQ8 as a simple mini-keyboard.
Read more
MRP:$661.21 SAVE 17%
 1 in stock $551.00
Click for better price!
or call +44 20 7424 1960
quote 757144
AION Modular 984 Four Channel Mixer Module
Cat: 780106 Rel: 07 Jul 20
 
Four channel mixer module
Notes: The 984 Four Channel Mixer is an AC coupled 4-input, 4-output matrix with bass and treble tone controls for each output channel. Each input has a separate attenuator for each of the four channels. Thus a mixer of 16 input attenuators provides maximum channel separation, or variable combinations of volume balance. Tone controls for each of the output channels can attenuate or emphasize bass or treble signals. Flat signal response is archieved with the control settings kept at "5" on the potentiometers. These are 2-pole active tone controls.

Input Impedance: 25k ohms
Output Impedance: 5k ohms
Inputs: Four input potentiometers per channel
Outputs: Four
Frequency Response: Audio only, AC couplet, DC and Low Frequencies are blocked.

Specifications:
Power: +12 (45mA), -12 (45mA)
Depth: 40 mm
Doepfer compatible
Read more
MRP:$677.17 SAVE 19%
 1 in stock $546.57
Click for better price!
or call +44 20 7424 1960
quote 780106
Make Noise Soundhack Morphagene Tape Splice Module
Cat: 638949 Rel: 31 Jul 17
 
Experimental sampler module - record, slice & rearrange audio material
Notes: The Morphagene is a next generation tape and microsound music module that uses Reels, Splices and Genes to create new sounds from those that already exist. Search between the notes to find the unfound sounds.

A few of the Morphagene's most basic uses: Splice recorded audio and jumble it using ORGANIZE. Manipulate playback speed and direction with Vari-Speed. Granularize with Gene-Size and Slide. Layer or Stagger Genes using MORPH. Undertake iterative music processes by recording manipulations and overdubs into new Splices, like having two machines (one for Playback and modulations, one for Record). Process sound in real time using Time Lag Accumulation. Utilize envelope following CV OUT and EOSG Trigger to engage Morphagene in conversation with the rest of your modular system. Stretch and squash sound with Clock input.

Width: 20hp
Max Depth: 30mm
Power: 165mA @ +12V, 20mA @ -12V

***MG137 Firmware Update:

Change Log

1. Improves Vari-Speed response for slow modulation rates.

2. Improves SD Card file format for more compatibility with software .wav file formats.

3. Doubles total record time per Reel.

Upgraded memory performance offers an increase from 1.45 minutes to 2.9 minutes of record time.

If you are using Splices that are over 1 minute long the SLIDE parameter will be scanning across a massive amount of material and therefore the longer the Splice the longer it will take to get to where you are Sliding toward. Imagine a tape machine shuttling forward or backward to get to your desired destination. No we cannot change this, the MG is scanning as fast as possible. This new double record time firmware will make this even more of a factor.

The new options mcr1, mcr2, and mcr3 allow user-definable Morph Chord Ratios (detuning of 2nd through 4th Genes with Morph at its highest settings).

The Auto-level procedure has been replaced with an improved input gain staging, accessed with a 4-step gain selection.

Playback gain is reverted to pre-mg157 level to improve TLA and Record-Into-New-Splice functions.

Internal processing improved to work with (2) and (3) to significantly improve signal-to-noise ratio on input and playback.

And more!
Read more
MRP:$641.25 SAVE 15%
 More than 10 in stock $542.14
Click for better price!
or call +44 20 7424 1960
quote 638949
Noise Engineering Loquelic Iteritas Percido Complex Digital Voice Module (silver faceplate)
Cat: 657487 Rel: 08 Aug 17
 
20HP drum synth voice module
Notes: Loquelic Iteritas Percido is an extension of the original Loquelic Iteritas. Like Loquelic Iteritas, it is a digital VCO with interpretations of three classic synthesis algorithms involving dual pitch control parameterized by four tone controls. LIP adds an envelope that can be shaped, modulated, and routed to pitches and tone controls, making it into a stand-alone voice.
Read more
MRP:$685.16 SAVE 21%
 1 in stock $542.14
Click for better price!
or call +44 20 7424 1960
quote 657487
Intellijel Cylonix Shapeshifter Dual Complex Morphable Wavetable VCO Eurorack Module
Cat: 563566 Rel: 10 Mar 15
 
Dual complex morphable wavetable VCO eurorack synth module
Notes: Cylonix and Intellijel have collaborated to bring you a very sophisticated and deeply complex Wavetable VCO. At the core of this module is very powerful FPGA board that he has pushed to the absolute max of its capabilities and crammed full of features. We wanted to create a module that really worked well in the modular context so there are a lot of modulation and control possibilities.

CHORDS
Oscillator 1 can be operated in a CHORD mode, which runs 8 copies of the oscillator in parallel with adjustable detuning, leading to very fat, rich waveforms. The oscillators have extensive modulation capabilities including audio rate (98KHz) Frequency and Phase Modulation (FM and PM) via external sources. Nonlinear combination processes allow the outputs of the two oscillators to interact to generate complex timbres and sonic textures.
There are 64 user selectable chords.

WAVEFOLDER
The SHAPESHIFTER module also includes the analog wave folder circuitry from
module to add analog warmth and metallic rasps to the digital oscillator output.
External signals can also be patched in.

PRESETS
The module includes a sophisticated preset mode where panel settings can be stored. There are 12 user-programmable preset slots and another 52 volatile slots that can be used as a scratchpad. These scratchpad slots are initialized to interesting presets on module powerup. The capabilities of the preset mode is not limited to mere passive storage of settings, however. In this mode the user can also step through, or sequence, the settings, either in order or randomly in response to pulses input to the external sync input. This gives the user the ability to generate complex sequences of sounds. The preset mode also allows the user to morph between the current panel settings and a preset providing a very powerful real-time performance tool.

SYNC
8 Different sync modes: HARD, SOFT, REV, HOLD, BUMP, 2=1, 1=2, OFF
with the ability to internally sync to a sub oscillator

PULSE
User selectable modes for the PULSE output: OR, AND, XOR, GLCH, +OSC1, EOC, +OSC2, -OSC2

MOD A modes: (audio rate modulation)
COMBO IN, SHAPE IN, PHASEMOD, VOCODER

MOD B options (all with CV control)

-Combo modes for OSC1 and OSC2:
NORMAL, RING, MIN, PONG, INLV, AND, XOR, GLCH
-Waveform TILT
-Chord mode overdrive
-Delay depth and FB
-Percussive mode decay time
Read more
 4 in stock $541.03
Endorphin.es Queen Of Pentacles 7 Voice Analogue Drum & Percussive Syntheiser Module
Cat: 791289 Rel: 23 Sep 20
 
7-voice analogue drum & percussive synthesiser module
Notes: Queen of Pentacles is a complex 7 voice analog drum/percussive synthesizer module based around:

3 analog discrete TR-909 circuits with advanced noise spectrum animation

4 zero latency microSD card sample players - including a set of freshly recorded samples for modern electronic music using handcrafted Paiste 602 15" and 18" cymbals

Effect processor as found in famous Grand Terminal/Milky Way/Blck_Noir

The new Queen of Pentacles covers the range of Dance/EDM/Techno music styles and is inspired by the famous TR-909.

The module offers seven drum sounds. Three drums are analog - bass drum, snare drum and clap. The other four drums are sample-based. Just .wav files playback directly from a microSD card with additional volume envelope, decay and pitch control. Those are simple modifiers but help you to shape the sounds played as one-shots.

There are 7 sounds in the drum kit. 3 drums are analogue - bass drum, snare drum and clap. These 3 are generated analogue for the following reason: each sound has its own binary noise generator and really - each time they are triggered the flavor is unique - they simply never repeat. At the same time they don't phase out each other as in the original 909, which is great - for example in the situation when reinforcing the clap on 2nd and 4th with an additional beat of the snare.

The other 4 drums are sample-based. Just .wav files playback directly from a microSD card with additional volume envelope, decay and pitch control. Those are simple modifiers but help you to shape the sounds played as one-shots.

Back then when Endorphin.es launched BLCK_NOIR, they introduced the next product line with black panels, as people liked the new styling. Now, along with continuation of the black panels comes another leap forward: New aluminum knobs suit the design perfectly.
Read more
MRP:$663.87 SAVE 19%
 6 in stock $536.59
Click for better price!
or call +44 20 7424 1960
quote 791289
Make Noise Erbe Verb DSP Reverb Module
Cat: 557456 Rel: 19 Dec 14
 
Reverb synth module with size ranges from "coffin" to "the heavens"
Notes: The Erbe-Verb is more than a collection of reverb algorithms or presets, it is a unique, modeless, continuously variable reverb algorithm with complete voltage control.

Typical reverb types such as plate, room, hall, shimmer and others may be programmed by adjusting the knobs. The continuously variable algorithm allows for hybrid and unreal spaces to be found.

Traveling between spaces is possible by modulating the algorithm or manually sweeping parameters. More than an end-of-chain effects unit, it's a whole new building block for modular synthesis. Like the Echophon, it's coded by Tom Erbe of soundhack.
Read more
 1 in stock $531.06
Click for better price!
or call +44 20 7424 1960
quote 557456
AJH Synth Fixed Filter Bank 914 Inductor Based Bandpass Filter Array Module (black)
Cat: 708095 Rel: 25 Jan 19
 
14 band inductor based fixed filter bank - black, 30HP
Notes: This 30HP wide module features twelve fixed frequency, inductor based bandpass filters, set at half octave interval spacing and covering from 125 Hz through to 5.8kHz. It also features low pass and high pass shelf filters, again they are fixed frequency and both are active inductor based circuits. It has a vintage pedigree that harks back to the original and highly sought after 914 Fixed Filter bank from the 1960's Moog 900 series modular synthesiser system, however we have brought this design up to date and made it compact enough to fit into skiff friendly Eurorack cases by using gyrator based active inductors, and have added some other very useful features too - the bands are split alternatively to left and right channels, each having their own individual output, and there is also an inbuilt Voltage Controlled cross-fader that allows panning between the left and right banks, with a mix of all bands available in the central position.

In addition, we have a second cross fader that can mix between the dry incoming signal, or an external signal fed into input 2, and this is cross-faded against the wet MIX Output - this allows Voltage Controlled crossfading from wet to dry signals, or between wet and external signals - and the level of each can be adjusted using the Input 1 and Input 2 level controls.

A further addition is the feedback control, this is similar in design to the resonance control on a regular VCF, but because of the multiple fixed filters topology it is rather different in operation - it would normally be added in small amounts to thicken up the sound, however we have allowed the feedback to traverse to quite extreme settings for howling feedback and even soft clipped self-oscillation, especially for the noise merchants out there...

Using L/C inductor topology bandpass circuits rather than the usual Sallen Key R/C active bandpass filters does give a slightly different sound and this is part of the magic of the original 914 filterbank, as the LC based circuit exhibits less phase shift against frequency that the more common Sallen Key R/C based bandpass filters that are used in many Modular synths.

Many people often wrongly assume that a fixed filter bank is exactly the same as a graphic equaliser - however this is certainly not the case, if all of the controls of a graphic EQ are set to centre then a flat frequency response is expected and the output will sound very similar, or identical to the input - this does not happen with a fixed filter bank, the frequency response rises and falls as it passes between each stage (but to a lesser extent than if the filters are all set to maximum output), so it acts as a soft slope comb filter, and the resulting output sounds very different from the input signal. Also, with all of the individual filters turned to zero there will be no output at all.
Read more
MRP:$618.64 SAVE 15%
 2 in stock $525.51
Click for better price!
or call +44 20 7424 1960
quote 708095
1010 Music Bitbox Sampler & Looper Module
Cat: 631136 Rel: 11 Nov 16
 
Sampler & looper module with 24-bit audio path & clock/MIDI inputs
Notes: Creative sampler in a Eurorack-friendly format. Touchscreen interface with tons of modulation options plus MIDI and CV control, WAV file support via microSD card and the ability to export to Ableton Live. Powerful.

Supplier's notes:
Bitbox delivers recording, clip launching, and looping in a musically intelligent way. With a 24-bit audio path, you can capture and play samples with impeccable audio quality. With clock and MIDI inputs, you can create loops pre-cut to bars or beats and launch clips with similar synchronization. Bitbox has a capacitive touch screen that makes easy work of tweaking, browsing, and loading sounds from microSD card.
Read more
 3 in stock $519.96
Rossum Electro-Music Morpheus Stereo Morphing Z Plane Filter Module
Cat: 658753 Rel: 11 Sep 17
 
Premium 14-pole stereo digital filter module
Notes: With our MORPHEUS digital filter module, we're finally able to unleash the full power of the 14-pole Z-Plane Filters that Dave invented for the E-mu Morpheus synthesizer.

The MORPHEUS Eurorack module includes over 280 filter configurations, what we call Cubes. Each Cube is composed of up to 8 complex filters that you can picture as being at the corners of a three dimensional cube (hence the name). Morpheus gives you the ability to smoothly interpolate between those 8 filters within the cube's three dimensional space.

Due to processor limitations back in the day, the original Morpheus was capable of real-time morphing in one dimension, but interpolation in the frequency and transform dimensions were set at note-on and remained static for the remainder of the note. But even with that limitation, Morpheus offered sonic capabilities that are unmatched to this day.

With the MORPHEUS filter module, you now have simultaneous real-time CV control of all three dimensions, for dynamic timbral effects unlike anything you've ever heard before. In stereo.
Read more
 5 in stock $519.96
Click for better price!
or call +44 20 7424 1960
quote 658753
ERM Polygogo Polygonal Stereo Oscillator Synthesis Module
Cat: 734881 Rel: 11 Feb 20
 
oscillator synth module
Notes: A unique graphical take on an oscillator design, E-RM's brand-new polygonal synthesis approach is unlike anything else we've seen. Stereo oscillator capable of a huge range of timbres. Innovative stuff.

Supplier's notes:
The polygonal synthesis is a kind of graphical complex amplitude shaping method. With the help of the built-in modulation sources, polygonal synthesis in polygogo opens up a wide range of sonic possibilities from clicky pinged sequences to unique dark thunderstorms, bass lines, leads and colored noise.

This mighty stereo oscillator impressed the audience with its wide range of possible timbres. The idea of sculpting a shape on the screen of the module that then translates into sound works really well and invites the user to interact with the module.
Read more
MRP:$605.33 SAVE 14%
 4 in stock $517.75
ADDAC System ADDAC111 Ultra .WAV Player Module (red faceplate)
Cat: 776121 Rel: 08 Sep 20
 
.wav player module
Notes: The ADDAC111 ULTRA .WAV PLAYER is the long awaited upgrade to the praised ADDAC101 .WAV PLAYER.

While keeping all functions of the original, there's more dedicated controls as well as a few new functions.

For this version, Micro SD Cards were used- this decision was made in order to help the hardware construction and make it only 3cm deep.

An Expansion module, ADDAC111B, was also created to allow users to recall the first 8 files through dedicated trigger signals. This allows sequencing of files.

The Loop Size, Start Point and Sample Rate defines how the loop is played.

Loop Settings defines if sample is looping or playing only once.

File Access if it advances to the next or previous file.

The VCA section controls the overall volume of the module.

And finally the Envelope Follower generates a CV voltage related to the amplitude of the audio signal pre-VCA.
Read more
MRP:$641.25 SAVE 19%
 2 in stock $516.63
Click for better price!
or call +44 20 7424 1960
quote 776121
Tangible Waves AE Modular Starter Rack 2 Complete Modular Synthesiser System
Cat: 719647 Rel: 10 Jun 19
 
Modular synthesiser starter rack
Notes: Complete starter setup of Tangible's AE system, designed as an affordable way into Eurorack modular. Everything you need to get started, including oscillators, filters and much more.

Supplier's notes:
A complete AE modular system in a two-row Rack (32 AE module units in complete); containing the following modules:

- MASTER
- 2OSC/D
- VCO
- NOISE
- 2 x LFO
- FILTER (Wasp type)
- SVFILTER
- 2ENV
- 2VCA
- LOGIC
- SAMPLE&HOLD
- BEATDIVIDER
- SEQ8
- 2ATT/CV
- MIXER
- DELAY

The case is extendable; via a joint kit (not included) another case of this type can be attached at a free angle; the bus is connected via a short connector cable.

It is shipped complete with power supply unit, MIDI breakout cable, a bunch of patch wires of every type and a quick start guide.
Read more
 More than 10 in stock $508.88
Click for better price!
or call +44 20 7424 1960
quote 719647
Humble Audio Quad Operator Linear FM Synthesis Module
Cat: 731216 Rel: 18 Jun 19
 
4 variable waveshape operators for linear FM synthesis - 30HP
Notes: Implementing frequency modulation synthesis completely from scratch in firmware, the Quad Operator is able to provide a modern take on frequency modulation synthesis.

- One knob per function design for true ease of use
- Any FM algorithm is possible via modulation matrix
- The Algo expander provides algorithm save/recall and crossfading capabilities
- Independent output per operator
- Virtual VCA per operator for both animating modulation and output volume control
- Includes a dedicated "AR FM" input with its own modulation sends, designed to bring an audio rate signal in from your rack for use as a modulator. Try processing a phase locked operator, and feeding it back in!
- Each operator can also be unlocked then tuned and patched independently, making the module a great general purpose oscillator bank
- Convincing digital emulation of classic analogue waveshapes - sine, triangle, square, and saw
- An LFO mode, enabled the generation of phase locked, complex modulation signals
Read more
 2 in stock $505.55
ADDAC System ADDAC402 Heuristic Rhythm Generator Module (red faceplate)
Cat: 776311 Rel: 08 Sep 20
 
Rhythm generator module
Notes: This module is a powerful rhythm generation machine- it features 4 voices of gate outputs (including inverted outputs for logic NOT sequences) where each voice can have independent lengths, all configurable with direct knobs anc cv inputs.

Perfect for precise polyrhythmic patterns and all sorts of non-linear sequencing.

The module works by 6 different rhythm generation "algorithms / principles":
Euclidean (equal distribution)
Golomb Rulers (inequal distribution)
Probabilistic (predictable distribution)
Game Of Life (organic progression)
Footwork'n (inducted error progression)
Pong (voltage controlled Pong game)

Plus a 4 channel Gate Sequencer Mode with up to 32 steps and 16 storable presets.

Add ADDAC402B Expansion for full I/O Midi control plus access to a powerful midi interface, with:
Midi Sync
5 cv to midi channels (notes and/or cc)
4 midi to gate channels
All panel controls (knobs, switches and push buttons) as cc controls.

All fully configurable with a midi learn feature for easier configuration.

MECHANICAL:
Format: Eurorack
Width: 20 HP
Depth: 5.5 cm

CONTROL VOLTAGE I/O:
CV inputs: 0 to +10v

ELECTRICAL:
Max current: 150mA
Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
 1 in stock $505.54
Click for better price!
or call +44 20 7424 1960
quote 776311
Serge Modular New Timbral Oscillator Module
Cat: 757121 Rel: 15 Oct 20
 
Oscillator module
Notes: The NTO is Serge’s legendary and most ambitious oscillator. It combines raw vintage sound with astonishing precison.

The new NTO by Random*Source has been developed in close cooperation with Serge. It took about 2 years to replace obsolete parts and bring the NTO to SMT with some optimizations (precision references and parts) for stability. It also features a new Pulse Out (square wave) in addition to the classic outputs.
Read more
MRP:$602.67 SAVE 17%
! low stock $502.21
Click for better price!
or call +44 20 7424 1960
quote 757121
FORTHCOMING
Supercritical Neutron Flux 8 Pole Variable Character Filter Module
Cat: 790485 Rel: 31 Dec 20
 
Variable filter module
Notes: The Neutron Flux 8 Pole Variable Character Filter is a 12hp skiff friendly eurorack filter module with a stereo analog core and digital control over it. The controls are familiar filter module controls (cutoff, bipolar FM, mode, drive) with some added spice and no complexity.

The special stuff is in these controllable features:

Character: This control blends between five vintage influenced classic filter characters: Fat, Crisp, Liquid, Sour and Mean. Coming later in a firmware update, the Neutron Flux will also have two user banks for more specialized filter characters which can be replaced via audio update.

Overdrive: You can switch the drive circuit to have a +20dB boost and have the drive pot to sweep from clean via warm saturation to extremely hard distortion.

Stereo: This control spreads the cutoff between L and R channels and induces drift. This way a mono signal can be split into wide stereo.

Two 4 pole filter cores: These can be run in stereo, mono to stereo or chained as a 8 pole mono filter for almost LPG-like steep slope. Both of them have their own drive circuits so you can have the overdrive stage in the front, in between or both.

The module can be used in many different ways. It can do classic LP/HP/BP filtering. It can self-oscillate in different waveforms. It can provide analog warmth and process something coming out of your DAW. It can act as a stereo distortion. It can spread your mono signal to a wide spatial stereo soundscape. It can do formant stuff and other wild characters. It can do audio-rate deep FM (1V/oct and FM CV's are all analog).

Power consumption: 250mA at +12 V and 100mA at -12 V
Depth: 25mm
HP: 12
Read more
MRP:$601.34 SAVE 17%
coming soon $501.11
Verbos Electronics Control Voltage Processor Module
Cat: 725952 Rel: 25 Mar 19
 
Two flexible mixers & function generator in one module - 18HP
Notes: The Control Voltage Processor from Verbos Electronics GmbH is a suite of control voltage processing possibilities divided into 3 sections in a slim 18HP package. The lower 2 sections are DC coupled mixers that allow mixing, inverting, offsetting, scaling, multiplying, dividing, crossfading or a combination of these functions. The top section is a voltage controlled slewing processor with independent control of Positive and Negative slew rate, with some unique tricks. The Positive and Negative slew, or Rise and Fall rates if you like, have reversing attenuators. The slopes can be blended from linear to RC curves (starting all slides fast and ending slow, like a proper "East Coast" Portamento) without a change in speed. It can be triggered like an AD envelope and has a Gate out that goes high when the CV out is below 100mV. Of course it can loop by patching the Gate out to the Trigger in. The Bounce control adds a unique flare of overshoot to CV changes, a bit like the effect of stopping a tape reel from turning and then letting it go. The combination of multiple voltage processors offers the user the functions of analogue computer.
Read more
 2 in stock $497.80
Rossum Electro-Music Panharmonium Mutating Spectral Resynthesiser Module
Cat: 728570 Rel: 16 Jul 19
 
26HP Eurorack spectral re-synthesiser module
Notes: Rossum Electro-Music Software Architect Bob Bliss (who also, as it happens, fathered E-mu's famed "EOS" Emulator Operating System) has created Panharmonium, a unique music and sound design tool that analyses the spectral content of any audio signal and uses that analysis to drive a bank of from 1 to 33 oscillators. Depending on various control settings, Panharmonium can accurately reproduce the input spectrum in real time or modify it in a multitude of wildly creative ways. All with an interface whose immediacy encourages performance and interaction.

Panharmonium input can be anything from a single oscillator to an entire mix (including vocals). From dense, swirling pads and drones that evolve with the input's changing spectrum, to clock-syncable spectral arpeggiation, to as-yet unnamed harmonic effects, Panharmonium opens up an entirely new world of sonic possibilities.

Additionally, Panharmonium can take a snapshot of an instantaneous spectrum and use that as a complex harmonic oscillator, which can then be modified and modulated by all of Panharmonium's other controls.

Panharmonium accomplishes its magic though a combination of functional submodules:

Spectral Analyser:

The Spectral Analyser provides tools for defining the analysis process.

- The Slice parameter sets the rate at which the incoming audio is transformed to spectral data. It can be set by the Slice and Multiplier controls, the Tap button, or by an external clock signal. Very short slice times result in real-time spectral data, while longer times can create rhythmic spectral patterns.
- The Centre Freq and Bandwidth controls (and associated CV inputs and attenuverters) control the range of frequencies to be analysed. The Bandwidth control allows the selection of narrow to wide pass bands on the left side of the pot and narrow to wide notches on the right side of the pot. The ability to sweep the frequency and modify the bandwidth under CV control opens up a wide range of sonic effects.
- The Freeze button lets you freeze the spectral integrator, sustaining the currently analysed spectrum.

Spectral Modifiers:

These controls allow you to creatively modify the analysed spectra.

- The Voice parameter lets you select from 1 to 33 oscillators to resynthesise the spectrum.
- The Blur parameter (and associated CV input) is a spectral lag processor that controls how quickly the spectrum can change.
- The Feedback control (and associated CV input) lets you route the re-synthesised audio back into the entire processing chain for subtle or dramatic feedback effects. At its max, the output becomes self-sustaining, even if the input is removed.

Oscillator Bank:

The Oscillator Bank resynthesises the analysed spectra.

- The Waveform parameter selects the oscillators' waveform. In addition to the usual sine, triangle, sawtooth and pulse waveforms, two special crossfading sine and sawtooth waveforms are included.
- The Freq control lets you tune the oscillators over a +/-7 semitone range. The frequency is further controlled by the 1V/Oct input and the FM input and attenuverter.
- The Octave control, not surprisingly, shifts the pitch of the output by octaves.
- The Glide parameter sets the amount of polyphonic glide (i.e., each oscillator has its own glide circuit).
- The Mix control (and associated CV input) sets the balance between the original input audio and the resynthesised audio.

Optional Functions:

A number of optional functions can be selected by using the Output Mode and Tap buttons.

- Holding the Output Mode button and adjusting the Slice control enables Drums Mode, which optimizes the spectral analysis for drums and other percussive inputs.
- Holding the Output Mode button and adjusting the Centre Freq control allows you to instead set the lower frequency of the analysis range.
- Holding the Output Mode button and adjusting the Freq control enables Spectral Warping. In contrast to conventional frequency adjustment, where the harmonic relationships between the spectral elements are preserved, Spectral Warping shifts the harmonic elements individually, producing a variety of clangourous, swarming textures.
- Holding the Tap button and adjusting the Freq control quantizes the resulting frequency adjustments to semitones.

Spectra Memories and Presets:

Panharmonium provides 12 user Spectra memories and 12 user Presets (in addition to 12 each factory memories).

- The Spectra memories let you store up to 12 frozen slices. When selected, a spectrum (up to 33 oscillators wide!) replaces any live input and can have its pitch controlled by the 1V/Oct input and FM controls.
- A Preset is a snapshot of all of the module settings, along with the value of any CVs present at the moment the preset is saved.

Panharmonium is 26HP wide and 25mm deep.
Power requirements (max): 140mA +12V, 30mA -12V. Reverse polarity protected.
Read more
! low stock $496.68
Red Panel/Buchla Model 158 Dual Channel Oscillator Module
Cat: 745932 Rel: 19 Sep 19
 
Dual sine-sawtooth generator based on Model 158 from the Buchla 100 series
Notes: The Model 158 is a dual oscillator created out of an entirely discrete transistor core. It consists of two independent and identical sides each with a front panel tuning knob, a frequency modulation input and attenuator, and a knob to fade smoothly between saw and sine waves. The RED PANEL model 158 is based off of the original "A" variant of the 158 oscillator.

The 158 was one of the very first voltage controlled oscillators ever produced. As such it contains many particular quirks/rawness of this first generation of synthesis. The exponential scaling of the oscillator is far from accurate, there is no temperature compensation, quick changes in pitch produce a slewing effect, and the saw waveform only vaguely resembles a saw wave through part of its range. It is as accurate a recreation as we believe is possible with the components available today. We performed hundreds of listening tests to find suitable replacements for obsolete transistors, and hand select multiple transistors on each individual unit to ensure that they have the proper sound.
Read more
 2 in stock $486.82
Tiptop Audio Trigger Riot Sequencer Module (white faceplate)
Cat: 783681 Rel: 28 Jul 20
 
Sequencer module
Notes: Complex trigger sequencing made much more simple thanks to Tiptop Audio. All-round approach functions as master clock, gate generator and more. Huge creative potential.

Supplier notes:
The Trigger Riot is a multipurpose trigger module that makes ultra complex patterns of gates triggers and clock pulses. The Riot covers a lot of ground in any Eurorack system from the master clocking for your entire system to algorithmic generation of pulses for envelopes, step sequencers, drums and accents that can venture into highly complex territory driven by simple yet powerful logic and algebra with a dash of pseudo randomness for some unpredictable results.

The user interface allows a great deal of control over pulses with each knob acting as a clock divider, clock multiplier, step injector, time shifter, clock shifter, pulse-width modulator, and an arithmetic probability processor. Now take that control and multiply it by 16 and feed it into 8 outputs for maximum Trigger Riot madness!

Furthermore the interface features a master clock knob, push switches to mute unmute and select rows, and multiple switches to configure, adjust, create loops and save your work for later recall from memory banks.

Trigger Riot integrates nicely in the studio with non-volatile memory, generous synchronization options with external gear including sample accurate sync with DAWs, smart synchronization to other Tiptop modules using SyncBus, and DIN Sync for vintage gear. A precise internal tempo clock generator with tap tempo and BeatSync to manage precise changes round out the features.
Read more
MRP:$565.42 SAVE 14%
 2 in stock $485.58
Click for better price!
or call +44 20 7424 1960
quote 783681
Flame 4 Vox Quad Wavetable Oscillator Module
Cat: 690791 Rel: 30 May 18
 
Quad polyphonic wavetable oscillator with 4 voices per VCO - 29HP
Notes: The 4Vox is a quad wavetable oscillator with up to four voices per VCO, resulting in a maximum of 16 voices at four individual outputs. With the MIDI In, the module can be played both with CVs and directly via MIDI, which also allows for modulating some additional parameters. There are 39 memory locations for wavetables and 32 for all global parameters of the VCOs.

The parameters of a wavetable can be controlled by CVs and by MIDI. For instance, you can morph through a wavetable with a CV, a MIDI controller or manually with the potentiometer. The range of waves within a wavetable can be selected by minimum and maximum values individually per voice which allows for creating more complex morphs.

Further controllable parameters are Detune, Semitone, Octave, Chord, Portamento, Amplitude and Amp Move (90 degrees phase shifted volume modulation of a VCO's 4 voices). Min and max values can be selected for those parameters as well. Via MIDI it's possible to control further parameters (notes, chords, pitch bend, patch selection and wavetable selection).

The VCOs can be played analogue (frequency by Pitch CV input), monophonic via MIDI or 4-voice polyphonic via MIDI.

The VCO can be used as a voltage controllable LFO with 3 modes: loop, one shot and gates. The SYNC input is used to trigger/reset the LFO. In one shot mode the LFO can be used as a trigger delay, too (SYNC = trigger in, GATE = trigger output, PITCH = delay time).

Each VCO has an analogue 1V/octave input including a fine tune control (+/-1 semitone) and pitch control (approx. 10 octaves), two freely assignable CV inputs, two freely assignable potentiometers, a trigger input for Sync/LFO-reset as well as a Gate and VCO/LFO output

The display can show a graphic of the selected waveforms.

All global parameters and also the VCO's settings can be named and saved as a non-volatile patch by the user. 32 memory locations are available.
Read more
MRP:$627.95 SAVE 24%
 1 in stock $477.84
Doepfer A-157 Trigger Sequencer Module Set
Cat: 745786 Rel: 09 Sep 19
 
52HP 8-channel, 16-step-button Eurorack step sequencer with breakout modules
Notes: A-157 is a trigger sequencer subsystem that generates eight trigger signals controlled by a 8x16 LED/button matrix (some customers call it "Miniature Schaltwerk" as it is based on the same matrix as the no longer available Schaltwerk).
The subsystem contains three modules:

A-157-1: 8 x 16 LED/button matrix and function addressing buttons/LEDs
A-157-2: Trigger Output module
A-157-3: Control Inputs module

The LED/button matrix module A-157-1 is the core of the subsystem. It is used to set or reset the trigger event on each of the 16 steps of each of the 8 rows. In addition the buttons and LEDs of the matrix are used for other functions too (like setting the first and last step of each row or addressing the preset memory).

The Trigger Output module A-157-2 outputs the 8 trigger signals and has an LED display for each trigger available.

The Control Inputs module A-157-3 has manual controls and trigger inputs available for the basic control functions start, stop, reset and clock. In addition four functions inputs are available which will be used in future firmware versions to assign these inputs to special functions (e.g. shifting a row left or right by means of an external gate/trigger signal or a second set of start, stop, reset and clock for individual rows).
Read more
 2 in stock $476.72
Click for better price!
or call +44 20 7424 1960
quote 745786
Grayscale Supercell Granular Synthesis Module (black panel version, an expanded version of Clouds by Mutable Instruments)
Cat: 739126 Rel: 16 Jul 19
 
Expanded take on Mutable Instruments' famous Clouds granular texture synthesiser - black faceplate, 34HP
Notes: Clouds, the granular synthesis module from Mutable Instruments, was discontinued in 2017. Supercell brings back Clouds in a more accessible 34 hp form factor, offering an improved user interface and several additional features:

- Each of the Blend parameters (Feedback, Panning, Mix, and Space) have dedicated knobs with their own CV inputs and inverting attenuators (attenuverters).

- The inputs and outputs now have mute switches, stereo VCAs, and separate VU meters. The knobs act as offset controls when their respective VCA inputs are patched.

- A stereo output gain control has been added, providing an additional +6 dB of gain to compensate for low output levels when using certain parameter combinations.

- The complex process of changing the sampling time and managing presets has been simplified with dedicated switches and status LEDs.

- Extensive modulation options for all parameters including direct patching of external CV, distribution of one CV to all parameters via the AUX input, or an internal smooth random CV that is normalized to any unpatched inputs when AUX is also unpatched. The attenuverters control the modulation depth in all three cases. As of firmware v1.01 the internal modulation rate can be adjusted within a range of 1 to 100 Hz.

- The inputs and outputs now include stereo VCAs and separate VU meters. The knobs act as offset controls when their respective VCA inputs are patched.

- Pitch is now controlled by two separate inputs: the V/Oct input is exponential and the Pitch input is linear. When both inputs are used, their voltages are summed.

- A manual Trig switch (for capturing individual grains) has been added, in addition to the Trig input that was present on Clouds.

All other features of the original Clouds remain intact, including access to the alternate modes. Thanks to Olivier Gillet for making the original Clouds hardware and firmware available under open-source licenses. Third-party firmware such as Parasites (by Matthias Puech) and Beat Repeat (by Julius Kammerl) will be supported in future firmware updates after the initial release of the module.
Read more
MRP:$572.07 SAVE 18%
 1 in stock $468.97
Click for better price!
or call +44 20 7424 1960
quote 739126
Items 1 to 50 of 1,001 on page 1 of 21
1  2  3  ...  21  »

Filter

Synth modules
商品
Release Date
Close