安全购物

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

安全购物

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Synthesisers

首页  Equipment  

Synthesisers

Options
Items 1 to 10 of 10 on page 1 of 1
Subscribe to our weekly Studio Equipment emails
Cat: 688736 Rel: 19 Jun 20
 
Analog semi-modular synthesiser based on Korg's legendary MS20
Notes: Channelling the Korg MS20, Behringer serve up a desktop module with attitude. Semi-modular design plays nicely with Eurorack gear to add a dose of the aggro MS sound to your rig.

Supplier notes:
An ultra-affordable homage to that iconic synthesizer with all the features of the original and then some, the K-2 lets you conjure up virtually any sound with incredible finesse and ease. With its pure analog signal path, dual authentic VCOs with 4 selectable waveforms each, plus extremely flexible VCF and VCA filters, the K-2 is sure to become your favorite keyboard. Owning the K-2 is like having your own personal time machine, enabling you to embrace the past - or make your imprint on the future!

Your K-2 comes ready to rock, thanks to its default signal routing that doesn't require lifting a single patch cable to instantly create amazing sounds. The semi-modular architecture lets you easily tap into the inspired sounds of 1980s and '90s progressive rock, wave, EDM and synth-pop music synthesizer tracks that made rock and roll history - or to design incredibly fat and original sounds that will make you a legend in your own right!

The very heart of K-2's sound is its versatile 6 dB High/12 dB Low filter, which lets you freely experiment with the High and Low-Pass Cutoff Frequencies and their respective peak (resonance) settings to dial in the perfect sound. The high-pass filter sets the level of signals below the cutoff frequency, effectively reducing the fundamental and lower-order harmonics levels. The low-pass filter controls the level of signals above the cutoff, which reduces higher-order harmonic content. K-2's VCF Peak controls provide emphasis to the signals at the crossover frequency.

K-2's authentic Voltage Controlled Oscillators (VCOs) provides an incredible range of 4 variable oscillator shapes with variable pulse widths and ring modulation for the ultimate in sound creation. VCO 1 waveform choices include triangle, reverse-sawtooth, noise and pulse, where the pulse width can be adjusted from square wave to narrow across a 4-octave range (32', 16', 8', or 4'). VCO 2's waveform can be selected from reverse-sawtooth, square, narrow pulse and ring, where both oscillators are operating. VCO 2's pitch can also be varied independently across a 4-octave range (16', 8', 4' and 2'). The VCO Mixer allows you to adjust the levels of VCO 1 and VCO 2 to create an overall mix and a wide range of amazing effects.

K-2's Low Frequency Oscillator (LFO), the Modulation Generator, features a selectable Waveform (reverse sawtooth, triangle, sawtooth) with a sweepable frequency range from 0.1 to 22 Hz - and 2 separate Envelope generators to help you craft incredible sounds! Envelope Generator 1 affects the frequency modulation via controls for Delay, Attack and Release Time, while generator 2 adjusts the cutoff frequency modulation, as well as amplitude modulation of the Voltage Control Amplifier (VCA). Dials for this generator include Hold, Decay, Attack, Sustain, and Release for unparalleled envelope-shaping control.

While it is a monophonic instrument (one note at a time), K-2's 16-note Poly Chain function lets you combine multiple synthesizers for up to 16-voice polyphony - plus provides vastly improved reliability and stability over its 1970s and '80s predecessors.

Designed to handle the rigors of life on the road or in the studio, your K-2 can easily be transferred into a standard Eurorack case for the perfect integration into your existing system.

For those who want the numbers, K-2 has 36 controls, all laid out in a highly-intuitive format that puts the joy back into your music creation. And you can expand K-2's tone-sculpting capabilities beyond your wildest dreams by utilizing the multi-I/O patchbay to connect external devices at virtually any point in the signal path!
Read more
 More than 10 in stock $292.61
Cat: 688722 Rel: 19 Jun 20
 
analog synthesiser
Notes: Blue version of Behringer's tribute to the legendary Roland SH-101. Classic Roland-inspired 80s analogue sound with a gorgeously squelchy resonant filter and powerful oscillator with beefy sub.

Supplier notes:
An ultra-affordable homage to that iconic synthesizer with all the features of the original and then some, such as a 32-step sequencer, arpeggiator and live performance kit, the MS-1-BU lets you conjure up virtually any sound with incredible finesse and ease. With its 32 semi-weighted full-size keys, pure analog signal path, authentic 3340 VCO with 4 simultaneously-mixable waveforms, plus extremely flexible VCF and VCA filters, the MS-1-BU is sure to become your favorite keyboard. Owning the MS-1-BU is like having your own personal time machine, enabling you to embrace the past - or make your imprint on the future!

Great care has been taken in engineering the MS-1-BU, including the true to the original analog circuitry, legendary VCO, VCF and VCA designs, all of which combine to make it easy to recreate the classic sound performance. This highly-focused attention to detail is what gives the MS-1-BU its ultra-flexible sound shaping capability, which covers everything from super-fat bass and lead tones to stunning effects - and all the way out to the otherworldly sounds of your imagination.

The inspired synthesizer tracks laid down in the 1980s and '90s are etched in the annals of progressive rock, wave, EDM and synth-pop music forever, making them truly classic in every sense of the word. The MS-1-BU lets you recreate all of that magic - or design incredibly fat and original sounds that will make you a legend in your own right!

MS-1-BU's authentic 3340 Voltage Controlled Oscillator (VCO) provides an incredible range of 4 simultaneously-mixable waveforms for sculpting the perfect sound. Options include: saw, triangle, square/pwm and octave-divided square sub-oscillator. Additionally, the VCO can be adjusted across a wide, 4-octave range (16', 8', 4', and 2'). This amazing flexibility gives you the tools needed to be your creative best.

The very heart of MS-1-BU's sound is its highly-flexible Voltage Control Filter (VCF), which includes faders for: cutoff Frequency (10 Hz to 20 kHz); Resonance (0 to self-oscillation); Envelope and Modulation depth, and Keyboard follow (0 to 100%) to dial in the perfect sound. MS-1-BU's VCF can be modulated via the ADSR, keyboard tracking and Bender controller. The Frequency Modulation (FM) Amount knob sets the depth, while the FM Source selector lets you further modify the signal by choosing from: pulse; sawtooth; sub oscillator 1 octave down; 2 octaves down; narrow 2 octaves down, and Noise.

MS-1-BU's sequencer allows you to program up to 32 steps of notes and rests and save them as a pattern. You can record, save and recall up to 64 patterns, all of which can be stored in the 8 banks, each holding up to 8 patterns. Your sequences can be played either in Keyboard mode, where you create and store the pattern, or Step mode, which allows you to interact while composing a pattern. The onboard Arpeggiator features 8 patterns (you can use just by playing a chord, which the arpeggiator then sequences through your selected pattern. Both the sequencer and arpeggiator in the MS-1-BU are fun, mesmerizing and totally addictive.

When you're ready to strut your stuff and get a little centerstage time, the MS-1-BU has that covered too! Just attach the included guitar strap and handgrip (with pitch bend wheel and a pitch modulation trigger), and take your performance to the next level.

In addition to the great sound-sculpting features already mentioned, the MS-1-BU has still more to offer. The noise generator can also be used as modulation source to create distortion-like effects, which will send your solo soaring into the stratosphere. Glide (portamento) lets you sweep seamlessly over time from one note to the next, creating smooth-as-silk transitions that few other instruments can emulate. MS-1-BU's Bender is also assignable to the VCO, VCF and pitch mod wheel on attachable handgrip. You can even modulate the pulse wave via the LFO, envelope or manually - for sounds ranging from mild to wild!

For those who want the numbers, MS-1-BU has 57 knobs, faders and switches, all laid out in a highly-intuitive format that puts the joy back into your music creation. Input and output connections include: MIDI I/O and Thru over USB/MIDI DIN; Velocity Out; CV; Gate; External Clock In; VCF CV In; Hold; External Audio; Phones; and main Output.

Read more
 More than 10 in stock $299.89
Cat: 688717 Rel: 19 Jun 20
 
analog synthesiser
Notes: Inspired by the amazing Roland SH-101, Behringer's MS-1 is a peach of an analogue mono synth, excelling at deep, elastic basslines but also amazing for arps, leads and FX.

Supplier notes:
An ultra-affordable homage to that iconic synthesizer with all the features of the original and then some, such as a 32-step sequencer, arpeggiator and live performance kit, the MS-1-BK lets you conjure up virtually any sound with incredible finesse and ease. With its 32 semi-weighted full-size keys, pure analog signal path, authentic 3340 VCO with 4 simultaneously-mixable waveforms, plus extremely flexible VCF and VCA filters, the MS-1-BK is sure to become your favorite keyboard. Owning the MS-1-BK is like having your own personal time machine, enabling you to embrace the past - or make your imprint on the future!

Great care has been taken in engineering the MS-1-BK, including the true to the original analog circuitry, legendary VCO, VCF and VCA designs, all of which combine to make it easy to recreate the classic sound performance. This highly-focused attention to detail is what gives the MS-1-BK its ultra-flexible sound shaping capability, which covers everything from super-fat bass and lead tones to stunning effects - and all the way out to the otherworldly sounds of your imagination.

The inspired synthesizer tracks laid down in the 1980s and '90s are etched in the annals of progressive rock, wave, EDM and synth-pop music forever, making them truly classic in every sense of the word. The MS-1-BK lets you recreate all of that magic - or design incredibly fat and original sounds.


The very heart of MS-1-BK's sound is its highly-flexible Voltage Control Filter (VCF), which includes faders for: cutoff Frequency (10 Hz to 20 kHz); Resonance (0 to self-oscillation); Envelope and Modulation depth, and Keyboard follow (0 to 100%) to dial in the perfect sound. MS-1-BK's VCF can be modulated via the ADSR, keyboard tracking and Bender controller. The Frequency Modulation (FM) Amount knob sets the depth, while the FM Source selector lets you further modify the signal by choosing from: pulse; sawtooth; sub oscillator 1 octave down; 2 octaves down; narrow 2 octaves down, and Noise.

MS-1-BK's Envelope generator features 4 ADSR (Attack, Decay, Sustain and Release) faders that help you craft incredible sounds, and utilizes a 3-position switch for Gate, Gate + Trigger and LFO. When applied to the Voltage Control Amplifier (VCA), the ADSR envelope is used to control the level of the note being played over time. When applied to the VCF, the ADSR envelope is used to control the cut-off frequency of the filter for each note played over time. In addition, the ADSR envelope can also be used to affect the VCO pulse width modulation.

MS-1-BK's sequencer allows you to program up to 32 steps of notes and rests and save them as a pattern. You can record, save and recall up to 64 patterns, all of which can be stored in the 8 banks, each holding up to 8 patterns. Your sequences can be played either in Keyboard mode, where you create and store the pattern, or Step mode, which allows you to interact while composing a pattern. The onboard Arpeggiator features 8 patterns (you can use just by playing a chord, which the arpeggiator then sequences through your selected pattern. Both the sequencer and arpeggiator in the MS-1-BK are fun, mesmerizing and totally addictive.

When you're ready to strut your stuff and get a little centerstage time, the MS-1-BK has that covered too! Just attach the included guitar strap and handgrip (with pitch bend wheel and a pitch modulation trigger), and take your performance to the next level.

In addition to the great sound-sculpting features already mentioned, the MS-1-BK has still more to offer. The noise generator can also be used as modulation source to create distortion-like effects, which will send your solo soaring into the stratosphere. Glide (portamento) lets you sweep seamlessly over time from one note to the next, creating smooth-as-silk transitions that few other instruments can emulate. MS-1-BK's Bender is also assignable to the VCO, VCF and pitch mod wheel on attachable handgrip. You can even modulate the pulse wave via the LFO, envelope or manually - for sounds ranging from mild to wild!

For those who want the numbers, MS-1-BK has 57 knobs, faders and switches, all laid out in a highly-intuitive format that puts the joy back into your music creation. Input and output connections include: MIDI I/O and Thru over USB/MIDI DIN; Velocity Out; CV; Gate; External Clock In; VCF CV In; Hold; External Audio; Phones; and main Output.
Read more
 More than 10 in stock $310.31
Click for better price!
or call +44 20 7424 1960
quote 688717
Cat: 688740 Rel: 19 Jun 20
 
analog synthesiser
Notes: Behringer's tribute to the ARP Odyssey is a pleasingly retro instrument. Fully analogue duophonic goodness with that classic tough ARP sound, great for bass and leads.

Supplier notes:
An ultra-affordable homage to the legendary ARP* synthesizer of the '70s and beyond with all the features of the original and then some including: dual VCOs; 32-step sequencer with onboard storage; arpeggiator and world-class Klark Teknik FX that boast reverb, chorus, flanger, delay, pitch shifter and multi-effects, the ODYSSEY lets you conjure up virtually any sound with incredible finesse and ease. With its 37 semi-weighted full-size keys, pure analog signal path based on authentic VCO, VCF and VCA designs from the '70s, the ODYSSEY is sure to become your favorite keyboard. Owning the ODYSSEY is like having your own personal time machine, enabling you to embrace the past - or make your imprint on the future!

Great care has been taken in engineering the ODYSSEY, including the true to the original analog circuitry, legendary VCO, VCF and VCA designs, all of which combine to make it easy to recreate the classic sound performance. This highly-focused attention to detail is what gives the ODYSSEY its ultra-flexible sound shaping capability, which covers everything from super-fat bass and lead tones to stunning effects - and all the way out to the otherworldly sounds of your imagination.

The inspired synthesizer tracks laid down in the 1970s are etched in the annals of progressive rock, disco and synth-pop music forever, making them truly classic in every sense of the word. The ODYSSEY lets you recreate all of that magic - or design incredibly fat and original sounds that will make you a legend in your own right!

ODYSSEY's 2 voices are the product of dual analog Voltage Controlled Oscillators (VCOs), which each provide your choice of: sawtooth, square/pulse with pulse-width modulation, or sine/square wave LFO for sculpting the perfect sound. This amazing flexibility gives you the tools needed to be your creative best.

The very heart of ODYSSEY's sound is its highly-flexible Voltage Control Filter (VCF), which includes faders for: Frequency; Resonance (0 to self-oscillation); and High Pass Filter (HPF) Cutoff Frequency. A feature missing from the original is a new 3-position switch, which lets you choose the VCF filter you prefer from all 3 iterations of the famous synth: 2-pole MKI (4023); 4-pole MKII (4035); and 4-pole MKIII (4075), plus a Drive switch to add a touch of edge to your sound.

ODYSSEY features two easy-to-use Envelope Generators, AR (Attack and Release) and ADSR (Attack, Decay, Sustain and Release) with 2 and 4 faders, respectively to help you craft incredible sounds. Switches are provided for ADSR Gate/LFO Repeat, AR Gate/LFO Repeat or thirdly, Keyboard Repeat/Auto Repeat - which provides a wide range of performance options.

ODYSSEY's sequencer allows you to program up to 32 steps of notes and rests and save them as a pattern. You can record, save and recall up to 64 patterns, all of which can be stored in the 8 banks, each holding up to 8 patterns. Your sequences can be played either in Keyboard mode, where you create and store the pattern, or in Step mode, which allows you to interact while composing the pattern. The onboard Arpeggiator features 8 patterns (you can use just by playing a chord, which the arpeggiator then sequences through your selected pattern. Both the sequencer and arpeggiator in the ODYSSEY are fun, mesmerizing and totally addictive.

For those who want the numbers, ODYSSEY has 35 sliders, 25 switches and 3 pressure-sensitive buttons, all laid out in a highly-intuitive format that puts the joy back into your music creation. Input and output connections include: MIDI In and Out over USB/MIDI DIN; Pedal; Portamento Footswitch; Low and High Outputs; External Audio In; CV In and Out; Gate In and Out, and Phones with a dedication Volume control.

In addition to the great sound-sculpting features already mentioned, ODYSSEY has still more to offer. There's the pink/white noise generator with sample & hold plus lag processor; Portamento, which lets you sweep seamlessly over time from one note to the next, creating smooth-as-silk transitions that few other instruments can emulate; and the 3 pressure-sensitive buttons for pitch and modulation control that provide a total hands-on performance. ODYSSEY is the ideal tone-making machine for creating sounds that run the gamut - from mild to wild!
Read more
 More than 10 in stock $399.87
Cat: 772857 Rel: 18 Jun 20
 
analogue synthesiser
Notes: The Octave Cat isn't the best known synth that Behringer have turned their attention to, but it's well worth a look. Similar in approach to the Odyssey but with an even broader sonic range, going from warm and fat to tough and edgy.

Supllier notes:
Great care has been taken in engineering the CAT, including the true to the original analog circuitry, legendary VCO, VCF and VCA designs that come together to recreate classic tones that are evocative of classic electronic music. This highly-focused attention to detail is what gives the CAT its ultra-flexible sound shaping capability. It gives you the ability to cover a lot of amazing tones from super-fat bass, tasty leads - and all the way to full on dreamy ambience from the far reaches of your imagination.

The synthesizer tracks laid down in the 1970s and 80s in progressive rock, wave and synth-pop have become classics and have inspired many other artists.

The CAT has the ability to accept any keyboard controller via MIDI. The signals generated can be tweaked via the Pitch Bend slider which can bend a note up or down one octave. Bump this up to two octaves by flipping the Octave Shift switch up or down. Use the Glide slider to change how fast a note transitions to another; up is faster, down is slower. Combine that with the LFO Freq slider to control the LFO and ADSR repeat tempo and you can create some amazing pulsating portamentos.

The very heart of the CAT's sound is its two VCOs. The Duophonic/Paraphonic nature of the CAT allows both oscillators to be controlled independently. Use the Fine and Coarse Frequency controls to tune VCO1 to VCO2. Keyboard control on the CAT can be set to either Mono or Poly. Poly mode lets VCO1 generate the highest note played on the keyboard while VCO2 handles the lowest allowing two notes to be played simultaneously. Setting the switch to Mono mode makes VCO1 generate the lowest note depressed on the keyboard.

Waveform switches on both VCOs allow different waveforms to be patched in from the LFO. Choose between Sine, Square, Sample and Hold and even pitch modulation through each VCO. Turning the Modulation Depth knobs in either direction controls the intensity of the effect. VCO2 also comes with a Sync switch that locks VCO1 with it and has them act as one huge oscillator to produce more complex waveforms and dramatic results. Mix VCO1 into VCO2 or vice versa and the CAT can produce some really tasty tones that make themselves at home in your next synth jam.

Each VCO on the CAT comes equipped with their own waveform sliders where you can adjust the volume of each type of VCO wave form. Pump up the Sub Octave, Sawtooth, Square, Triangle or Pulse waves or mix them all together and create some truly unique tones.

The CAT comes with another set of claws in the form of a VCF filter section. Here you can get more complex and robust tones by incorporating VCO1 into the mix. Introduce more waveforms and manipulate the Q slider to emphasize harmonics and Filter Cutoff slider which acts as a low-pass filter. Turn the CAT into a really funky bass machine or an out-of-this-world synth that creates some searing lead tones. You can even create some amazing drum sounds by manipulating the VCOs, VCF and ADSR.

The CAT features a whole slew of Inputs and Outputs that expand its capabilities beyond what you can see out of the box. You can route external control voltages to VCO1 or 2, the VCF and even pump in some external line-level audio into the CAT. You can even connect the CAT to other external synthesizers through the Gate, ADSR, AR or Keyboard Outputs. The CAT's 16-note Poly Chain function lets you combine multiple synthesizers for up to 16-voice polyphony - and it provides vastly improved reliability and stability over its 1970s and '80s predecessors.

To give the signal even more character, you can use the CAT's Transient Generator to create a detailed voltage transient every time a key is depressed. Adjust the Attack, Decay, Sustain and Release via the matching sliders and to shape your signal. The AR transient generator works similarly to the ADSR but with less detailed control over the envelope. You can also set the ADSR to automatically repeat or only when a key is held down. The Sample and Hold switch can be set so the VCO1 setting is sampled or, when set to Noise mode, produce a random output pattern. Slide the LFO Delay control up or down to determine when the LFO will reach its maximum output after a key is depressed.

The CAT has 47 controls, all laid out in a highly-intuitive format that puts the joy back into your music creation.
Read more
 More than 10 in stock $279.07
Cat: 700960 Rel: 29 Jun 20
 
MIDI interface
Notes: Latest version of the mini synth that began life as a DIY kit. Simple analogue architecture which offers a good introduction to subtractive synthesis and sound design.

Supplier notes:
This project is a reprise of the Sound Lab Mini-Synth with the addition of a Sample and Hold and several circuit and component value changes to improve performance. Even if you already have a Sound Lab, this is thoroughly recommended as a completely new project.New design and a new MIDI INTERFACE onboard.

You can play your SLMS+ with a midi keyboard or midi controller.

Type: Analog Synthesis: Subtractive

Oscillators: 2 Waveforms: Pulse, Pulse Variable, Saw Down, Square Osc Modulation: Envelope, Input, Knob, LFO, Sync Hard

Envelope: 1 Evelope

Paramerters: Attack, Decay, Looping

Filters: 1 Types: 12dB Slope (2-pole), Low Pass, Resonance Filter Modulation: Envelope, Knob, LFO, S&H

Lfo: 1 LFO Parameters: Saw Up, Saw Down, Square, Triangle

Sample & Hold Addon: variable sample rate - output voltage glide - switch to select source to be modulate

Midi cannel: 1 (not exchangeable) Midi port: MIDI IN, MIDI THRU Control change: pitch bend, modulation , portamento (CC 5) 1V/Oct: 5 octaves

IMPORTANT: POWER ON SOUNDLAB WHEN YOUR MIDI SEQUENCER IS IN STOP MODE! MICROCONTROLLER CAN GENERATE MIDI SIGNAL ERROR IF YOUR SEQUENCER IS IN PLAY MODE.

Polyphony: 1 Timbrality

1 Tuning: Standard Modes: Mono

Desktop Controls: Knobs, Switches, Buttons Display Type: LED Dimension: 27 x 16 x 7 (cm) Material: Plexiglass Front panel: Aluminum (1mm thick)

Connections: Audio Output Connections: 1/4" Phone Jack, Mono Out

Power: 9V power supply 300 mA (euro) Audio Output Count: 1 Control voltage: 2 - 1V/Oct (1/4" Phone Jack/3,5 mini jack) Gate in: 1 (1/4" Phone Jack/3,5 mini jack) IMPORTANT NOTE: TO USE GATE/MIDI
Read more
MRP:$299.90
 4 in stock $276.99
Click for better price!
or call +44 20 7424 1960
quote 700960
Cat: 762338 Rel: 02 Jul 20
 
Analogue synthesiser
Notes: In the spirit of continuous improvement, Moog Music is transitioning production of the award-winning Sub Phatty analog synthesizer to make way for a new standard: the Subsequent 25. Implementing upgraded sonic modifications and functional improvements, the new Subsequent 25 becomes the standard production model moving forward.

Subsequent 25 builds on the success of its predecessor by implementing the ultra-popular paraphonic functionality of Duo Mode, upgrading to wood side pieces, and featuring the familiar Subsequent series of user-requested performance adjustments.
Read more
MRP:$1,123.39 SAVE 21%
 1 in stock $889.30
Click for better price!
or call +44 20 7424 1960
quote 762338
Cat: 782214 Rel: 29 Jun 20
 
Desktop analogue modular snythesiser
Notes: Updated all-in-one desktop semi-modular system from the ever-reliable Pittsburgh Modular. Big, warm East Coast synth sound meets compact, Eurorack-compatible format. Very nice.

Supplier notes:
The Pittsburgh Modular Lifeforms SV-1b Blackbox is a complete, standalone desktop format modular synthesizer. A full compliment of analog tools for sonic experimentation stuffed into a portable, powered steel enclosure. Two patchable oscillators and our legendary Pittsburgh Filter are paired with a perfectly curated set of synthesis tools. The Lifeforms SV-1b Blackbox provides absolutely everything you need to create gigantic and iconic synth sounds, in the studio or on the go.

The original Lifeforms SV-1 eurorack format synthesizer module is legendary for its deep, analog sounds capable of pumping out everything from roaring bass and cutting leads to absolute chaos. The SV-1b shares this same bold, powerful core while fine tuning the details. We have made a countless number of small tweaks and adjustments to the original SV-1 synthesis engine to improve the stability and functionality of the SV-1b. The sound is what matters, and this is still the East Coast analog monster to beat.

From the custom designed oscillator core to the iconic sound of the Pittsburgh Filter, the SV-1b showcases the true power of analog synthesis. The oscillator core used in the SV-1b was developed by Michael Johnsen and Richard Nicol to pair the visceral size and depth of vintage oscillators with the tracking and stability needed by modern instruments. The result is a palate of waveforms tuned to perfection with proprietary analog designs and countless listening tests. The Pittsburgh Filter is the heart of the SV-1b. The first collaboration between Michael and Richard, it defines the sound of Pittsburgh. Buttery smooth, the filter adds a depth and weight to waveforms so it never sounds dull. Michael's liquid resonance circuit allows the Pittsburgh Filter to overdrive smoothly and never lose the bottom end regardless of how high you turn up the resonance. Everywhere is a sweet spot.

The MIDI to CV converter enables you to connect all your MIDI-compatible gear and convert it to control voltage right inside the SV-1b. Volt per octave, gate, CC, and velocity outputs allow you to connect to your MIDI keyboard or DAW while a digital LFO with sine, triangle, square, and quantized random voltage waveforms provides clock sync'd modulation options. A clock input allows you to override the internal or MIDI clock and sync to external CV and gate clock signals. The built-in arpeggiator unlocks another level of playability and the capacity to create complex and fresh musical patterns out of just a few notes.

The custom core, dual analog oscillators provide the sonic framework for massive synth sounds and a deep exploration of east coast synthesis. Sine, triangle, saw, and square waves are at your control, all available to modulate via FM and hard sync. Oscillator One also contains our unique blade wave. The shifting saw-like shape of the blade wave can be controlled using the width CV input, creating a sweeping or chorusing effect. Oscillator Two is normaled to the FM of Oscillator One, providing jaw-dropping analog FM bass, deep percussive hits, searing leads, and thick, warm analog pads which all come to life from these two Pittsburgh designed, organic sounding oscillators. Both analog oscillators dip well below audio rate, allowing them to function as voltage controllable LFOs.

A utility LFO with triangle and square wave outputs is ideal for VCA or Filter frequency sweeps. Or, turn it up and release the dynamic FM capabilities of either oscillator. A Tools section provides access to two sub-octave oscillators, derived from Oscillator One's core frequency. Analog noise and sample & hold finish out the Tools section.

This versatile four channel mixer comes pre-wired for fast access to Oscillator One's sine, saw, pulse and sub. However, you are just a patch cable away from instantly making your own unique blend of waveforms from the SV-1b. The mixer can also be split into two independent two channel mixers for maximum patching flexibility.

SV-1b Module Specifications:

Panel size: 48hp
Depth: 35mm
Power Usage: +12v 230mA, -12v 200mA. Does not require +5v. Includes reversed power polarity protection.
Enclosure Power and Specs:
Black powder coat steel construction.

Dimensions: 9 3/4" x 5 1/4" x 2 1/2"

Weight: 3.5 lbs

Power: 1.5A +15v DC power adapter

Included:
Patch Cables: 6 Nazca Audio Brand patch cables.
1/8" stereo jack to midi connector cable.
Read more
MRP:$832.23 SAVE 17%
 2 in stock $693.52
Click for better price!
or call +44 20 7424 1960
quote 782214
Cat: 777383 Rel: 22 Jun 20
 
analogue monophonic synthesiser
Notes: The mid-sized option in Teenage Engineering's innovative POM range, the 170 is designed as an introduction to modular synthesis. A simple DIY build in IKEA-style flat-pack format.

Supplier notes:
POM-170 is a home-build analogue monophonic synthesizer with built-in programmable sequencer. A complete kit with powder coated chassis, keyboard, oscillator, filter, envelope, LFO, VCA, speakerbox, power distro, powerpack, a screwdriver, 8 patch cables, and an illustrated build guide.

Each kit comes with all of the parts needed to build the project. Included in these flat packed synthesizers are everything from a powder coated aluminium chassis to an illustrated build guide with instructions and bend angles. When bending is complete, move on to mount the modules, snap the wire connectors and finalise your build with knobs and rubber feet. Remember, think twice and double-check the angles before bending.

Warning: Make sure to remove the batteries from the battery holder before connecting the DC-plug to the external AC/DC adapter.

Use separate battery charger to charge re-chargeable batteries.

Note: There is no power supply included. If you want to run the units on wall power you need an adapter with the following specifications (sold separately):
AC/DC adapter
12V, min 1A (12 watt)
Polarity: center negative
Plug: 4.75/1.7mm

SPECIFICATIONS
1 x POM-170 Chassis
7 x Modules - M-1, M-4, M-5, M-6, M-10, M-11, M-16
1 x Battery Pack
1 x Distro
23 x Trim Knob
9 x Value Knob
8 x Audio Cable
6 x Rubber Foot
6 x Chassis Screw
1 x Screwdriver
1 x User's Manual

PSU improved to be more stable and offer longer battery life
Oscillators retrimmed to improve audio range
Speaker volume knob adjusted for intuitive control
Labelling for the output jacks on the keyboard changed to "CV 1, 2, 3" the 3 "program gate" jacks changed to "Gate 1, 2, 3" and the 3 "keyboard" jacks changed to "Keyboard CV"
Increased size of screw holes on powder coated aluminIum chassis for easy building
Standoffs come pre-threaded for quicker assembly

MEET THE MODULES
M-1
square
square oscillator
Rich in odd harmonics, the square wave oscillator is great for hollow basses and screaming leads. The pulse width modulation (pwm) input makes it possible to generate
a faux two oscillator detune sound.

M-4
filter
low pass filter
Shape your sound with the 24db/oct low pass filter. Get lost in space while tweaking the resonance and frequency pots.

M-5
env
envelope
A classic. Attack, decay, sustain and release. Give your sonic creation the contour it deserves. Triggered by any signal that crosses the two volt threshold.

M-6
vca
voltage control amplifier
Automate your volume! Feed it control voltage and your signal will adapt accordingly. Best friends with the envelope for classic configurations, and your oscillator in wired configurations

M-10
lfo
low frequency oscillator
Generating both square as well as triangle waves, the low frequency oscillator is the perfect tool to spice up your patches. Great in everything from automated filter sweeps to syncing the clocks.

M-11
speaker
amplifier+speaker bellow
Cables goes in, sounds come out. Show off your amazing patch to the rest of the world. Let them hear it.
Warning: never connect headphones directly to the outputs! You can damage your ears and your headphones.

M-16
keyboard
keyboard+sequencer
Keyboard with individual tuneable keys and a programmable step sequencer.
Read more
MRP:$498.59 SAVE 27%
 3 in stock $363.07
Cat: 777388 Rel: 22 Jun 20
 
home-build analogue synthesiser
Notes: Top-of-the-range model in Teenage Engineering's kit-build modular synth range. Three oscillators, all the basic synth modules you'd expect, plus built-in sequencer and speaker.

Supplier notes:
POM-400 is a home-build analogue synthesizer with 3 oscillators, noise, random generator, 2 envelopes, 2 VCA's, LFO, filter, mixer, speakerbox, power pack and a 1-16 step sequencer. A Complete kit with powder-coated chassis, 16 modules, 15 patch cables, screwdriver, and an illustrated build guide.

Each kit comes with all of the parts needed to build the project. Included in these flat packed synthesizers are everything from a powder coated aluminium chassis to an illustrated build guide with instructions and bend angles. When bending is complete, move on to mount the modules, snap the wire connectors and finalise your build with knobs and rubber feet. Remember, think twice and double-check the angles before bending.

Note: There is no power supply included. If you want to run the units on wall power you need an adapter with the following specifications (sold separately):
AC/DC adapter
12V, min 1A (12 watt)
Polarity: center negative
Plug: 4.75/1.7mm

Warning: Make sure to remove the batteries from the battery holder before connecting the DC-plug to the external AC/DC adapter.

Use separate battery charger to charge re-chargeable batteries.

SPECIFICATIONS
1 x POM-400 chassis
14 x Modules - M-1, M-2, M-3, M-4, 2x M-5, 2x M-6, M-7, M-8, M-9, M-10, M-11, M-12
1 x Battery Pack
1 x Distro
37 x Trim Knob
13 x Value Knob
15 x Audio Cable
14 x Chassis Screw
4 x Rubber Foot
1 x Screwdriver
1 x User's Manual

Added PO-Sync output, which allows for easy patching out and into the PO series. Use this jack to sync modular tempo with any pocket operator.
Speaker volume knob adjusted for intuitive control
Level on sequencer clock out adjusted to 5v from 10v
Output amplitude on white noise adjusted so now it can trigger envelopes
PSU has been improved, it is now more stable and offers a longer battery life
Oscillators have been retrimmed, giving an improved audio range to play with
Increased size of screw holes on powder coated aluminium chassis for easy building

MEET THE MODULES
M-1
square
square oscillator
Rich in odd harmonics, the square wave oscillator is great for hollow basses and screaming leads. The pulse width modulation (pwm) input makes it possible to generate
a faux two oscillator detune sound.

M-2
saw
sawtooth oscillator
Containing both the odd and even harmonics, the sawtooth is great for string types of sound. The linear frequency modulation input (fm) easily brings you into the sci-fi domain.

M-3
sine
sine oscillator
With no overtones the pure sine wave is a jack of all trades. From pure bass to dub sirens, it's the army knife of a modular system. The linear frequency modulation input (fm) easily brings you into the sci-fi domain.

M-4
filter
low pass filter
Shape your sound with the 24db/oct low pass filter. Get lost in space while tweaking the resonance and frequency pots.

M-5
env
envelope
A classic. Attack, decay, sustain and release. Give your sonic creation the contour it deserves. Triggered by any signal that crosses the two volt threshold.

M-6
vca
voltage control amplifier
Automate your volume! Feed it control voltage and your signal will adapt accordingly. Best friends with the envelope for classic configurations, and your oscillator in wired configurations

M-7
mixer
3-channel mixer
A necessity in all modular systems. Three inputs, one output, with volume control over both the individual inputs as well as the master output.

M-8
noise
2 x noise
The white noise contains noise equal over the whole spectrum. The saw output is a perfect companion for the sample and hold.

M-9
rand
Randomise your music with the sample and hold. Any input is sampled and then presented at the outputs. Rate can be controlled both externally and internally, but always needs an external signal to sample. Experiment with both receptive and random sources as the sample input.

M-10
lfo
low frequency oscillator
Generating both square as well as triangle waves, the low frequency oscillator is the perfect tool to spice up your patches. Great in everything from automated filter sweeps to syncing the clocks.

M-11
speaker
amplifier+speaker bellow
Cables goes in, sounds come out. Show off your amazing patch to the rest of the world. Let them hear it.
Warning: never connect headphones directly to the outputs! You can damage your ears and your headphones.

M-12
sequencer
16-step sequencer
Sixteen steps of control. Override the internal clock with the clock input. Send clock out or PO Sync out. Make it go backwards with the arrow input. Jump to the first step, the second, fourth or eight step with the reset and binary.
Read more
MRP:$623.55 SAVE 20%
 2 in stock $496.70
Items 1 to 10 of 10 on page 1 of 1

Filter

Synthesisers
商品
Release Date
Featured
Close