USD
我的语言
我的货币
Your wishlist is empty
Items in wishlist:
最近添加:
Loading...
购物车
您的购物车为空
购物车的物品:
小计:
最近添加:
Loading...
观看购物车
首页  Equipment  Hi-fi拾音头|唱机拾音头
Subscribe here to receive our weekly roundup of the latest DJ equipment products

Filter

商品
Release Date
Featured

Hi-fi拾音头|唱机拾音头

The hi-fi cartridge is one of the most important elements of your music setup, converting the grooves of your records into an audio signal. As the main point of contact in your system, the cartridge and its matching stylus are crucial to the quality of your sound. Most turntables are supplied with a basic cartridge which will get you started on your audiophile journey, but an upgraded cartridge will always sound better. The benefits include lower distortion, flatter frequency response and more precise reproduction of the sound of your vinyl. Premium moving magnet cartridges offer most of the sonic benefits of expensive moving coil designs, with brands including Grado, Sumiko and Goldring offering a range of excellent options to suit most budgets.
Turntable Cartridges | Phono Cartridges
选项
Items 1 to 10 of 10 on page 1 of 1
Goldring E3 Moving Magnet Hi-Fi Cartridge & Stylus (single)
Cat: 661196 Rel: 23 Aug 17
 
Stylus & cartridge, featuring Magnetic Duplex Technology
Notes: The Goldring philosophy is to promote the accurate reproduction of the original recording, maintaining the creative nuances, musicality and rhythm the artist intended you to hear. The E Series is designed to capture this experience when used with all medium to high mass tonearms found on the majority of budget to medium priced turntables. This is achieved through the use of Magnetic Duplex Technology and Goldring Expert Adjustment.

The E3 cartridge, the highest in the range features the same aluminium cantilever as the E2, but benefits from a superior bonded, super-elliptical (0.3 x 0.7 mil) stylus. This gives it superior high frequency groove detail retrieval ability over ordinary elliptical (0.4 x 0.7 mil) or spherical (0.6 mil) styli due to its smaller front to back radius. Its main effect is the reduction of sibilance, especially in high level vocal recordings.

Magnetic Duplex Technology:

All cartridges in the range feature Magnetic Duplex Technology - a 'dual magnet' generator assembly which more accurately traces the record groove providing better stereo separation and a more involving and musical sound stage.

Expert Adjustment:

The E-series cartridges have been designed to allow micro-adjustments to be made during production using a special adjustment screw. This means the cartridge can be safely installed in a typical turntable because the angle that the stylus makes with the record surface has been pre-set. The result is an optimised channel balance with zero degrees of horizontal tracking adjustment required. This ensures a consistent and reassuring performance for the life of the product.

Stylus/Cantilever:

Featuring spherical styli with a choice of cantilevers, the E1 and E2 models are ideal as an upgrade to any budget, pre-fitted or obsolete cartridge.

The E3 model with its refined super elliptical stylus is a worthwhile upgrade for those wishing to squeeze even more information and detail from the record groove.
Read more
MRP:$118.71 SAVE 19%
 1 in stock $95.83
Click for better price!
or call +44 20 7424 1960
quote 661196
Goldring 1042 Hi-Fi Cartridge & Stylus (single)
Cat: 661184 Rel: 01 Nov 17
 
Audiophile record cartridge with Gyger-S diamond stylus
Notes: Top-of-the-range audiophile cartridge from Britain's oldest cartridge company. Beautifully revealing sound with quiet background and replaceable Gyger-S stylus included.

Supplier notes:
The 1042 is a record cartridge for the audiophile who demands the ultimate sonic performance from their system, together with the convenience of a user replaceable stylus. The extended groove contact of its Gyger-S diamond gives the 1042 unsurpassed resolution of the fine groove modulations, producing an exceptionally detailed, smooth and musical sound.
Read more
MRP:$434.54 SAVE 19%
 2 in stock $351.77
Click for better price!
or call +44 20 7424 1960
quote 661184
Goldring 1012GX Hi-Fi Cartridge & Stylus (single)
Cat: 661189 Rel: 01 Nov 17
 
High quality record cartridge with Gyger II diamond stylus
Notes: The Goldring 1012GX record cartridge uses the acclaimed Gyger-2 diamond stylus. This is a fine-line type which gives smooth extended high frequencies, low distortion and reproduces a highly detailed and dynamic sound. Advanced diamond tip polishing ensures excellent tracking ability and reduces record wear. The 1012GX represents outstanding value for money and has become one of Goldring's most popular cartridges.
Read more
MRP:$380.09 SAVE 21%
 1 in stock $298.40
Click for better price!
or call +44 20 7424 1960
quote 661189
Audio Technica AT-VM95E Moving Magnet Cartridge & Elliptical Stereo Stylus
Cat: 883810 Rel: 21 Jun 22
 
VM95 series Elliptical stereo cartridge
Notes: AT-VM95E VM95 series Elliptical stereo cartridge - Aluminium cantilever, 4.0mV output voltage, Compatible body with all VM95 Series stylus assemblies and Replacement for AT95E and AT95EX

VM95 series Elliptical stereo cartridge
The AT-VM95E, the new Audio-Technica entry model Elliptical cartridge will replace the legendary AT95E and take advantage of the developments of the AT95EX introduced in 2015. The AT-VM95E features an improved and distinctive design resulting in a more rigid low resonance housing, and two threaded inserts in the cartridge body enabling it to be mounted to the headshell or on an integral tonearm with just two screws, no nuts.

Aluminium cantilever
4.0mV output voltage
Compatible body with all VM95 Series stylus assemblies
Replacement for AT95E and AT95EX
20 to 22,000Hz frequency response
VM95 Series - Styli compatibility
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

AT-VMN95C

AT-VMN95E

AT-VMN95EN

AT-VMN95ML

AT-VMN95SH

AT-VMN95SP

AT-VM9E Series compatibility with the AT-XP Series DJ Cartridges
The electromagnetic engine-body of XP-Series, is fully compatible with all replacement styli of VM95 Series and will deliver more output voltage than VM95 Series cartridge. So providing improved compatibility with phono inputs of Professional DJ Mixers.
VM95 Series electromagnetic engine-body is also compatible with the three replacement styli of the DJ cartridge AT-XP Series, nevertheless, the electromagnetic engine-body of XP-Series, will deliver more output voltage than VM95 Series cartridge in order to provide better compatibility with phono inputs of Professional DJ Mixers.
Note that typical tracking force when using XP Series styli is three grams as opposed to two grams for VM95 Series styli.
The suspension design and compliance of XP-Series styli have been optimized for intensive DJ’ing, including possible manual cueing and back-cueing.
The VM95 Series suspension design and compliances of VM95 Series have been designed for optimum audiophile reproduction.
ATN-XP7

ATN-XP5

ATN-XP3

Elliptical Bonded Stylus
Elliptical diamond stylus follows the groove modulation with greater precision compared to a conical stylus, offering improved frequency and phase responses whilst reducing distortion.

No use of nuts
VM95 Series cartridges features two M2.6 threaded inserts allowing the installation of the cartridge onto tonearm or removable headshell without the use of nuts.Each cartridge is provided with one pair of 8mm M2.6 screws, one pair of 11mm M2.6 screws and two plastic washers.

Cartridge & Stylus
Frequency Response 20 - 22,000 Hz
Channel Separation 20 dB (1 kHz)
Vertical Tracking Angle 23°
Vertical Tracking Force 1.8 to 2.2g (2.0g standard)
Stylus Construction Bonded Round Shank
Read more
MRP:$54.45 SAVE 14%
 1 in stock $46.56
Click for better price!
or call +44 20 7424 1960
quote 883810
Goldring 1022GX Hi-Fi Cartridge & Stylus (single)
Cat: 661187 Rel: 23 Aug 17
 
High quality record cartridge with Vital PH diamond stylus
Notes: The 1022GX record cartridge is recommended for the discerning listener. The diamond stylus is a Vital PH type, which provides increased resolution and ensures the maximum accuracy of musical reproduction.
Read more
MRP:$401.87 SAVE 20%
 1 in stock $320.18
Click for better price!
or call +44 20 7424 1960
quote 661187
Audio Technica AT-VM95E/H Moving Magnet Cartridge & Elliptical Stylus With AT-HS6 Headshell
Cat: 883827 Rel: 21 Jun 22
 
VM95 series Elliptical stereo cartridge on AT-HS6 Headshell
Notes: AT-VM95E/H VM95 series Elliptical stereo cartridge on AT-HS6 Headshell - AT-VM95E mounted on AT-HS6BK headshell, The total set weight is 15.5g and Assembled and tested in the Audio-Technica Factory in Fukui-Japan

VM95 series Elliptical stereo cartridge on AT-HS6 Headshell
AT-VM95E mounted on AT-HS6BK headshell
The total set weight is 15.5g
Assembled and tested in the Audio-Technica Factory in Fukui-Japan
VM95 Series - Styli compatibility
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

AT-VMN95C

AT-VMN95E

AT-VMN95EN

AT-VMN95ML

AT-VMN95SH

AT-VMN95SP

Elliptical Bonded Stylus
Elliptical diamond stylus follows the groove modulation with greater precision compared to a conical stylus, offering improved frequency and phase responses whilst reducing distortion.

Preassembled With AT-HS6BK Headshell
The AT-VM95E cartridge is fitted onto the 9g aluminiumdie cast body headshell

Cartridge & Stylus
Frequency Response 20 - 22,000 Hz
Channel Separation 20 dB (1 kHz)
Vertical Tracking Angle 23°
Vertical Tracking Force 1.8 to 2.2g (2.0g standard)
Stylus Construction Bonded Round Shank
Read more
MRP:$87.13 SAVE 22%
 1 in stock $67.53
Click for better price!
or call +44 20 7424 1960
quote 883827
Grado Prestige Black-3 Phono Cartridge & Stylus (single, standard mount)
Cat: 780755 Rel: 23 Jul 20
 
Cartirdge & stylus
Notes: The Black3 uses a three piece OTL cantilever that has a Grado specific diamond mounted on a brass bushing.

What's the difference between Black2 and Green2?
Approximately 15% of the Black3 production run meet higher specifications. These are hand selected from the batch and designated as Green3.

Grado's OTL, or optimized transmission line, technology provides an ideal transfer of signal from the surface of the LP to the generator of the system. This technology rejects unwanted resonances and lowers distortion preserving the fundamental and harmonic frequencies of the music. This also helps keep noise generated by the motor system in the cartridge to a minimum.

Grado's OTL stylus/cantilever design makes records sound quieter, improves the height, width, and depth of the soundstage, and present more detail than previously obtainable.

The Black3 is hand assembled by Grado's team in Brooklyn, with some builders having over 25 years of experience. This updated series of cartridges offers excellent tonal balance, dynamics, and realism, for a most rewarding reproduction of vocals and instruments. The coil winding techniques using ultra high purity copper wire, which were honed during the development of the Lineage Series, have let the electrical circuits achieve unison between the four coils in each phono cartridge. This allows for a precise balance between channels and accurate stereo imaging.

As in all Grado phono cartridges the Black3 is powered by a twin magnet system that optimizes the balance between stereo channels. All internal magnetic circuit parts are held to extremely high tolerances creating the desired stereo imaging. Grado's patented Flux-Bridger design allows the Black2 to have one of the lowest effective moving mass generating systems while creating an excellent balance throughout the full frequency range.
Read more
MRP:$107.82 SAVE 24%
 2 in stock $81.67
Grado Prestige Silver-3 Phono Cartridge & Stylus (single, standard mount)
Cat: 780770 Rel: 23 Jul 20
 
Cartridge & stylus
Notes: Excellent value upgrade to standard hi-fi turntable styluses. Designed for smooth sound with a balanced tonal presentation. Hand built in Brooklyn by experienced audiophile specialists.

Supplier notes:
The Silver3 uses a four piece OTL cantilever with a Grado specific elliptical diamond stylus mounted on a brass bushing. A machined turned generator is used to achieve a lower distortion and greater transparency.

What's the difference between Gold3 and Silver3?
Approximately 5% of the Silver2 production runs meet higher test specifications. The cartridges that exhibit these specs are hand-selected to become a Gold2.
Grado's OTL, or optimized transmission line, technology provides an ideal transfer of signal from the surface of the LP to the generator of the system.

This technology rejects unwanted resonances and lowers distortion preserving the fundamental and harmonic frequencies of the music. This also helps keep noise generated by the motor system in the cartridge to a minimum.

Grado's OTL stylus/cantilever design makes records sound quieter, improves the height, width, and depth of the soundstage, and present more detail than previously obtainable.

The Silver3 are all hand assembled by our team in Brooklyn, with some builders having over 25 years of experience. With the recent development of the highly received Lineage Series of cartridges, we were able to have a trickle down of technology and bring some new techniques to the Silver3.

This updated series of cartridges offers excellent tonal balance, dynamics, and realism, for a most rewarding reproduction of vocals and instruments. Our coil winding techniques, using ultra high purity copper wire which were honed during the development of the Lineage Series, have let the electrical circuits achieve unison between the four coils in each phono cartridge. This allows for a precise balance between channels and accurate stereo imaging.

As in all Grado phono cartridges the Silver2 is powered by a twin magnet system that optimizes the balance between stereo channels. All internal magnetic circuit parts are held to extremely high tolerances creating the desired stereo imaging. Grado's patented Flux-Bridger design allows the Silver2 to have one of the lowest effective moving mass generating systems while creating an excellent balance throughout the full frequency range.

The development of the Epoch in the Lineage Series gave us an in-depth experience with using an outer housing as a damping device. This led to the creation of a process which de-stresses the chassis and dissipates unwanted energy & resonant frequencies, allowing the desired signal to travel freely.
Read more
MRP:$227.62 SAVE 26%
 1 in stock $168.80
Nagaoka C502MP Hi-Fi Cartridge
Cat: 900231 Rel: 11 Oct 22
 
MM type stereo cartridge
Notes: Plug-in type cartridge

Output voltage: 3mV (5cm/SEC)

Frequency response: 20Hz to 20KHz

Channel separation: 20 dB (1KHz)

Channel balance: 2dB or less

Load resistance: 47KO

Load capacity: 100pF

Cantilever: Aluminum alloy

Needle tip: 0.6mil cone, joining diamond
Read more
 2 in stock $54.45
Audio Technica VM670SP Dual Moving Magnet Hi-Fi Cartridge & Stylus
Cat: 638058 Rel: 20 Feb 17
 
Dual moving magnet mono cartridge for shellac or phonograph records.
Notes: Dual Moving Magnet Mono Cartridge for Shellac or Phonograph records

Model dedicated to 78 RPM records, whose round stylus has a large curvature radius at the tip. The curvature radius is 3 mil, and suitable for playing 78 RPM records from a wide variety of eras.

Audio-Technica's internationally-patented Dual Magnet design replicates the structure of the cutter head.

Instead of using a single, large magnet, the two magnets are arranged in the shape of a "V". The two magnets are positioned precisely to match the positions of the left and right channels in the stereo groove walls. Consequently, the VM design ensures outstanding channel separation, extended frequency response and superb tracking.

Para-toroidal generating system

Para-toroidal coils improve generating efficiency and offers superb linearity, since leakage of magnetic flux in this continuous and unitised magnetic circuit is low. Permeability of the cores is also optimised through the use of laminated cores.

Mono body

For monaural operation, left and right channels should be connected. A mono body on which left and right terminals are connected internally reduces record noise which is primarily in the vertical direction and obtains a highly focused 'centre' sound image compared with stereo bodies.

600 Series

Specialised 600 series mono body with internal wiring dedicated to monaural sound.

Conical Bonded (3mil) Stylus

A conical bonded stylus with a large curvature radius at the tip. The curvature radius is 3 mil, and suitable for playing 78 RPM records from a wide variety of eras.

Specifications

Cartridge & Stylus

Frequency Response: 20 - 20,000Hz
Vertical Tracking Angle: 23 degrees
Stylus Construction: Bonded Round Shank
Recommended Load Impedance: 47,000O
Coil Impedance: 1,400O (1kHz)
Output Voltage: 3.0mV (1kHz, 5cm/sec.)
Stylus Shape: Conical Bonded (3mil)
Cantilever: Aluminium Pipe
Static Compliance: 15 x 10-6 cm/dyne
Dynamic Compliance: 2.0 x 10-6 cm/dyne (100Hz)
Mounting: 1/2" centres
Dimensions: 17.3 (H) x 17.0 (W) x 28.2 (L) mm
Accessories Included: Cartridge installation screws 5mm ×2 and 10mm ×2, Washer ×2, Hexagon nut ×2
Recommended Load Capacitance: 100 - 200pF
Replacement Stylus: VMN70SP
Stylus Size: 3.0 mil
Type: VM Type
Weight: 6.4g
Read more
 1 in stock $151.38
Click for better price!
or call +44 20 7424 1960
quote 638058
Items 1 to 10 of 10 on page 1 of 1
Cart subtotal: