Hi-Fi Cartridges | Phono Cartridges

Notes: AT-VM95E VM95 series Elliptical stereo cartridge - Aluminium cantilever, 4.0mV output voltage, Compatible body with all VM95 Series stylus assemblies and Replacement for AT95E and AT95EX

VM95 series Elliptical stereo cartridge
The AT-VM95E, the new Audio-Technica entry model Elliptical cartridge will replace the legendary AT95E and take advantage of the developments of the AT95EX introduced in 2015. The AT-VM95E features an improved and distinctive design resulting in a more rigid low resonance housing, and two threaded inserts in the cartridge body enabling it to be mounted to the headshell or on an integral tonearm with just two screws, no nuts.

Aluminium cantilever
4.0mV output voltage
Compatible body with all VM95 Series stylus assemblies
Replacement for AT95E and AT95EX
20 to 22,000Hz frequency response
VM95 Series - Styli compatibility
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

AT-VMN95C

AT-VMN95E

AT-VMN95EN

AT-VMN95ML

AT-VMN95SH

AT-VMN95SP

AT-VM9E Series compatibility with the AT-XP Series DJ Cartridges
The electromagnetic engine-body of XP-Series, is fully compatible with all replacement styli of VM95 Series and will deliver more output voltage than VM95 Series cartridge. So providing improved compatibility with phono inputs of Professional DJ Mixers.
VM95 Series electromagnetic engine-body is also compatible with the three replacement styli of the DJ cartridge AT-XP Series, nevertheless, the electromagnetic engine-body of XP-Series, will deliver more output voltage than VM95 Series cartridge in order to provide better compatibility with phono inputs of Professional DJ Mixers.
Note that typical tracking force when using XP Series styli is three grams as opposed to two grams for VM95 Series styli.
The suspension design and compliance of XP-Series styli have been optimized for intensive DJ’ing, including possible manual cueing and back-cueing.
The VM95 Series suspension design and compliances of VM95 Series have been designed for optimum audiophile reproduction.
ATN-XP7

ATN-XP5

ATN-XP3

Elliptical Bonded Stylus
Elliptical diamond stylus follows the groove modulation with greater precision compared to a conical stylus, offering improved frequency and phase responses whilst reducing distortion.

No use of nuts
VM95 Series cartridges features two M2.6 threaded inserts allowing the installation of the cartridge onto tonearm or removable headshell without the use of nuts.Each cartridge is provided with one pair of 8mm M2.6 screws, one pair of 11mm M2.6 screws and two plastic washers.

Cartridge & Stylus
Frequency Response 20 - 22,000 Hz
Channel Separation 20 dB (1 kHz)
Vertical Tracking Angle 23°
Vertical Tracking Force 1.8 to 2.2g (2.0g standard)
Stylus Construction Bonded Round Shank

Notes: P-mount Dual Moving Magnet cartridge with conical bonded stylus

AT81CP P-mount Dual Moving Magnet cartridge with conical bonded stylus. 0.6 mil conical stylus, Bonded round shank diamond and Carbon Fibre Reinforced ABS cantilever

The AT81CP allows owners of Technics, Hitachi, Pioneer and similar linear tracking turntables with T4P plug-in connectors to enjoy the high-fidelity sound that only Audio-Technica can offer.

Designed specifically for the linear format, the AT81CP features Audio-Technica's unique dual moving magnet construction. The dual magnet system is combined with the para-toroidal coil construction to assure an excellent sonic clarity and wide channel separation.

Specifications

Cartridge & Stylus

Frequency Response: 20 - 20,000 Hz
Channel Separation: 18 dB at 1kHz
Vertical Tracking Angle: 20 degrees
Stylus Construction: Bonded Round Shank
Recommended Load Impedance: 47,000 ohms
Coil Inductance: 400mH (1 kHz)
Output Voltage: 3.5 mV (mV at 1 kHz, 5 cm/sec)
Output Channel Balance: 2.5 dB
Stylus Shape: Conical
Cantilever : Carbon Fibre Reinforced ABS
Mounting: P-mount
Dimensions: H10.0×W15.3×D35.1 mm
Recommended Load Capacitance: 100-200 pF
Replacement Stylus: ATN81CP
Stylus Size: 0.6 mil
Type: Dual Magnet
Weight: 6.0g