安全购物

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

安全购物

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Make Noise

View:
Options
Items 1 to 41 of 41 on page 1 of 1
Refraction (clear vinyl 12")
Cat: MNR 010. Rel: 27 Feb 19
Ambient/Drone
  1. Refraction Praxis (4:24)
  2. Mutations (version) (5:01)
  3. Neurotoxin (3:53)
  4. Revealer (Reduction) (5:41)
 in stock $14.82
Cat: 557526 Rel: 19 Dec 14
 
10hp blank panel for modular synth system
Notes: 10hp blank panel for modular synth system
Read more
 3 in stock $10.86
Make Noise 1hp Blank Panel (blank synth panel)
Cat: 557523 Rel: 20 Dec 14
 
1hp blank panel for modular synth system
Notes: 1hp blank panel for modular synth system
Read more
 5 in stock $3.17
Cat: 559435 Rel: 27 Jan 15
 
20hp blank panel for modular synth system
Notes: 10hp blank panel for modular synth system with lightning bolt pattern inspired by the Maths synth module.
Read more
 2 in stock $13.76
Make Noise 4hp Blank Panel (blank synth panel)
Cat: 557524 Rel: 19 Dec 14
 
4hp blank panel for modular synth system
Notes: 4hp blank panel for modular synth system
Read more
 4 in stock $4.50
Cat: 557527 Rel: 19 Dec 14
 
Pack of 5 x 6" patch cables for modular synths and synth modules
Notes: Pack of 5 x 6" patch cables for modular synths and synth modules
Read more
 9 in stock $9.80
Cat: 712004 Rel: 30 Nov 18
 
Make Noise power supply
Notes: Schuko plug/Type F power cord for the Make Noise 7U Steel CV Bus Case, suitable for many countries in Europe.
Read more
 2 in stock $34.96
Cat: 566673 Rel: 18 May 15
 
Pack of 20 high quality 3.5mm mono patch cables for modular synths, assorted lengths
Notes: 20 pack of grey 6", white 12", blue 12", and black 24" patch cables for modular synths.

3.5mm mono jack connectors.
Read more
 4 in stock $37.62
Cat: 717118 Rel: 11 Jan 19
 
Pack of 15 high quality 3.5mm mono patch cables for modular synths, assorted lengths
Notes: 15 pack of purple 6", white 12", and black 24" patch cables for modular synths.

3.5mm mono jack connectors.
Read more
 3 in stock $27.54
Cat: 557509 Rel: 19 Dec 14
 
Clocked sequential binary event machine module
Notes: BRAINS is a clocked sequential binary event machine. It is designed to be connected to one or two Pressure Points to form a 4 or 8-Step 3-channel analog sequencer. Classic synthesis control!
Read more
 3 in stock $108.07
Cat: 664819 Rel: 03 Oct 17
 
4 stage function generator or ADSR module - 8HP
Notes: CONTOUR is a 4 Stage function generator, or ADSR, derived from our 0-COAST synthesizer. It is designed to create control voltages to drive the Dynamix, modDemix and other fast VCAs, VCFs, and more. The Contour takes inspiration from the original Loudness Contour circuit of the MiniMoog, which is perhaps the most well-known example of East Coast Synthesis. The simplified control set (where Decay adjust both the decay to Sustain and the Release) makes it quick and intuitive to set-up. The Contour module adds full voltage control, a mirrored output, End of Onset and End of Contour Gate outputs which allow it to be highly integrated into any modular synthesizer regardless of coastal allegiance.

Width: 8HP
Depth: 24mm
Power @+12V: 36mA
Power @-12V: 16mA
Read more
 3 in stock $103.84
Cat: 557458 Rel: 19 Dec 14
 
Dual voltage controlled oscillator (VCO) for generating complex waveforms
Notes: A dual Voltage Controlled Oscillator designed for generating complex waveforms.

Expanding on the classic arrangement of Primary and Modulator Oscillators, the DPO has both of the VCOs operable as complex signal sources. It is in essence a Dual Primary Oscillator.
Read more
 3 in stock $562.07
Cat: 664820 Rel: 03 Oct 17
 
2 channel low-pass gate with integrated mixer - 10HP
Notes: DYNAMIX is a fast two-channel Low Pass Gate, dynamics manager and mixer, the core of which is derived from our 0-COAST synthesizer. The LEVEL parameter provides simultaneous voltage control over the Amplitude and Frequency content of audio signals, operating as a VCF/A. The DYNMC parameter accepts audio signals or control voltages and converts them into a signal that may increase or decrease the LEVEL parameter thus allowing for Expansion, Compression and Ducking. The summing section is complete with an AUXiliary INput allowing for the chaining of multiple MIX units (modDemix, Optomix and RxMx modules) to create large, non-centralized mixes.

The DYNAMIX is functionally similar to the Optomix LPG: a fundamental element in the sound of West Coast Synthesis, however, rather than using the Vactrol component that gives the Optomix its characteristic "slow" sound, the DYNAMIX circuit utilizes transistors in a topology that has more in common with East Coast instruments. This combination of West Coast technique and East Coast circuitry is No-Coast synthesis at its best, allowing the Low Pass Gate to be used in tandem with an extremely important East-Coast synthesis circuit: the ADSR, a 4-stage Envelope generator we call CONTOUR.

Width: 10HP
Depth: 24mm
Power @+12V: 55mA
Power @-12V: 45mA
Read more
 4 in stock $157.35
Cat: 557456 Rel: 19 Dec 14
 
Reverb synth module with size ranges from "coffin" to "the heavens"
Notes: The Erbe-Verb is more than a collection of reverb algorithms or presets, it is a unique, modeless, continuously variable reverb algorithm with complete voltage control.

Typical reverb types such as plate, room, hall, shimmer and others may be programmed by adjusting the knobs. The continuously variable algorithm allows for hybrid and unreal spaces to be found.

Traveling between spaces is possible by modulating the algorithm or manually sweeping parameters. More than an end-of-chain effects unit, it's a whole new building block for modular synthesis. Like the Echophon, it's coded by Tom Erbe of soundhack.
Read more
 5 in stock $447.13
Cat: 732343
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


The Erbe-Verb is more than a collection of reverb algorithms or presets, it is a unique, modeless, continuously variable reverb algorithm with complete voltage control.

Typical reverb types such as plate, room, hall, shimmer and others may be programmed by adjusting the knobs. The continuously variable algorithm allows for hybrid and unreal spaces to be found.

Traveling between spaces is possible by modulating the algorithm or manually sweeping parameters. More than an end-of-chain effects unit, it's a whole new building block for modular synthesis. Like the Echophon, it's coded by Tom Erbe of soundhack.
Read more
 1 in stock $433.37
Cat: 557477 Rel: 19 Dec 14
 
Compact analog computer module specifically designed for musical purposes
Notes: FUNCTION is part of the MATHS family of control voltage utility modules.

It is a small analog computer designed for solely musical purposes.
Read more
 1 in stock $149.39
Cat: 712003 Rel: 30 Nov 18
 
Synth module bus cable
Notes: The Isolated Select Bus Cable can be used to connect a Rene 2 and a Tempi directly.
Read more
 4 in stock $4.23
Cat: 726849 Rel: 04 Apr 19
 
5 x Make Noise style rogan knobs, large
Notes: Make Noise knobs.
Read more
 2 in stock $11.92
Cat: 590918 Rel: 26 Oct 15
 
Dual Low Pass Gate synthesiser module - 4HP wide
Notes: The LxD, Low Strike Duo, is a dual-response, two channel, direct-coupled, Low Pass Gate, which utilizes vactrols in order to provide simultaneous control over the Amplitude and Frequency Spectrum of an Input Signal.

It is, in essence, a VCFA (Voltage Controlled Filter Amplifier). Unlike the Optomix, the LxD offers two different filter responses. CH. 1 offers a 12db/ Octave response that is mildly-resonant, while CH. 2 offers a 6bd/ Octave that is non-resonant.

The Output of CH. 1 is normalled to the input of CH. 2. This normalization puts the two channels in series, which is similar to the VCF into VCA arrangement made popular by many monosynths of the 1970's.
Read more
 8 in stock $104.37
Cat: 557488 Rel: 19 Dec 14
 
Analog computer synth module designed for musical purposes
Notes: MATHS is an analog computer designed for musical purposes. Amongst other things, it will allow you to:

- Generate a variety of linear, logarithmic, or exponential triggered or continuous functions
- Integrate an incoming signal
- With no signal applied, generate a variety of linear, logarithmic, or exponential functions
- Add, subtract and OR up to 4 signals
- Generate analog signals from digital information (Gate / Clock)
- Generate digital information (Gate / Clock) from analog signals
- Delay digital (Gate / Clock) information
Read more
 9 in stock $281.84
Click for better price!
quote 557488
FORTHCOMING
Make Noise Mimeophon Stereo Multi Zone Colour Audio Repeater Module
coming soon TBA
Cat: 557490 Rel: 19 Dec 14
 
Synth module to be used for ring modulation, VCA, mixer, signal multiplication, voltage controlled polarization, attenuation and more
Notes: The modDemix features 2 identical direct-coupled balanced modulator circuits that may be used together or independently for Ring Modulation, VCA, Mixer, Signal Multiplication, Voltage Controlled Polarization, Attenuation and more.
Read more
 3 in stock $131.38
Cat: 557508 Rel: 19 Dec 14
 
Multiple signal sending module
Notes: The Multiple is a simple but important module that allows for sending a signal to multiple destinations. Within the Make Noise system the Multiple may also be used for combining clock, gate and pulse signals together to create interesting timing sources (in other words, it acts as a Gate combiner aka logic OR circuit).

It has 9 inter-connected sockets that may be split into different group combinations depending upon how it is patched. The jacks circled in white will make or break the interconnects between the 3 groups of three, thus allowing for three 3-way, one 5-way/ one 3-way or one 7-way multiple.

The Multiple is passive, because the Make Noise system does not require Buffered Multiples since all critical control signals are already buffered in such a way as to provide a large fan-out capability.
Read more
 2 in stock $36.56
Cat: 599686 Rel: 26 Sep 16
 
Single voice patchable synthesiser
Notes: The 0-COAST is a single voice patchable synthesizer. Its name reflects the fact that it utilizes techniques from both the Moog and Buchla paradigms (aka "East Coast," and "West Coast," due to their locations), but is loyal to neither and thus implements "no coast synthesis."

While the 0-COAST utilizes classic modular synthesis techniques, it's designed to operate with or without the use of patch cables. The necessary connections have been made from circuit to circuit so it operates as an expressive, musical MonoSynth. Using only the MIDI controller of your choice you could apply new timbres to your existing musical forms!

Using the included Patch Cables you could get more scientific, experimenting with new ways to wire up the circuits. You might even forgo MIDI altogether, disappearing into a cloud of analog FM induced Sidebands and harmonics scattered around a single fundamental drone that has nothing to do with any form of music you've ever known.
Read more
 4 in stock $464.09
Cat: 664823 Rel: 11 Oct 17
 
MIDI cable for the Make Noise O Coast
Notes: Replacement O Coast MIDI cable with DIN connector and 3.5 mm TRS jack.
Read more
 8 in stock $4.23
Cat: 664822 Rel: 09 Oct 17
 
Make Noise 0 Coast replacement power adapter
Notes: Official PSU replacement for Make Noise 0 Coast - contains 5 interchangeable plug types.
Read more
 1 in stock $14.82
Cat: 557510 Rel: 19 Dec 14
 
Controller/analog sequencer module that is played by hand
Notes: Pressure Points is a controller module, an analog sequencer that is played by hand. Touching the gold plated copper wires (aka Touch Plates), you become part of the circuit, generating a gate signal (Gate OUT), a control signal proportional to the amount of pressure applied (Press OUT) and the 3 Tuned Voltages for the activated Stage.
Read more
 2 in stock $194.96
Cat: 718736 Rel: 27 Feb 19
 
Multi-mode filter with four filter types - 18HP
Notes: The Quad Peak Animation System combines the auditory enveloping of stereo spaced peaks with the animation of two or more peaks in a single channel dancing around each other or engaging in primitive vocalizations. QPAS is Quad Core, containing four identical state variable filter cores with a control system powerful enough to guide them in stereo multi-peak operation, but simple enough to encourage system integration rather than domination.

- Quad Core Stereo Analogue
- Multi-Peak with clean resonance
- Fast response encourages deep FM
- Radiate spaces stereo image and animates associated channel
- High Q settings are under damped, excitable and ring by gate or trigger
- 2 modulation inputs aid patch exploration
- Stereo VCA, pre-filter with gain
- Mono to Stereo, Stereo to Mono, Mono to Mono and Stereo to Stereo operations
- Smile Pass filter response unique to QPAS
- Low Pass, Band Pass, High Pass and Smile Pass outputs simultaneously available
Read more
 9 in stock $366.61
Cat: 703388 Rel: 15 Oct 18
 
World's first and only 3D Cartesian Sequencer for music synthesisers - 34HP
Notes: The Rene music synthesizer module is a powerful three-dimensional prism of composition. It is the world's only 3D Cartesian Music Sequencer. Named for the French philosopher & mathematician Rene Descartes, it uses the Cartesian coordinate system to unlock the analogue step sequencer from the shackles of linearity. The original Rene was a one-channel, two-dimensional Cartesian sequencer with limited memory, this new Rene is a three-channel, three-dimensional Cartesian sequencer with memory for up to 64 complete States. Considering the multiple channels and FUN programming options per multiple axis, Rene has become an n-dimensional matrix or tesseract of synthesizer sequencing.
Read more
 More than 10 in stock $496.93
Cat: 557451 Rel: 19 Dec 14
 
Random voltage generator synth module
Notes: The "WoggleBug" is a random voltage generator, originally designed by Grant Richter of Wiard Synthesizers. It is a continuation of the "smooth" and "stepped" fluctuating random voltage sources pioneered by Don Buchla within the Model 265 "Source of Uncertainty," expanding it to include the other-worldly Woggle CVs (stepped voltages with decaying sinusoids edges).

The Wogglebug is a very musical random voltage generator where it is possible to synchronize all random signal to a Master Clock. Guaranteed to unleash your synthesizer's ID MONSTER!
Read more
 3 in stock $230.98
Cat: 557504 Rel: 19 Dec 14
 
Output interfacing synth module with the added functionalities of FX Loop
Notes: Rosie is an output interfacing module with the added functionalities of FX Loop, Crossfader and Auto-Cue system.

It is designed to facilitate live performance on the modular synthesizer by allowing the artist to preview and modify portions of a patch using the Auto-CUE system, while the audience is listening to a different portion of the patch as selected by the crossfader.

Additionally it allows for Stereo processing of all sounds via the FX Loop. The Rosie is suitable for headphone monitoring of the modular system and interfacing the modular system to a recording environment. Internal Level Matching and Limiting w/ overload indication makes it easy to connect the modular system in the studio or on stage.
Read more
 4 in stock $135.62
Make Noise Skiff Module Case (synth module case)
Cat: 593468 Rel: 04 Jan 16
 
104hp synthesiser module case - requires user to install power solution
Notes: In 2009 Tony designed the first Skiff to complement the vertically oriented cases available at the time by providing an ergonomic enclosure for our Rene and Pressure Points touch controllers.

Today the Make Noise Skiff is updated to provide a smart way to build a small modular synthesizer. It is low cost, but extremely durable. The clean simple lines and matte black color place visual emphasis where the action is; the patch the artist has created.
Read more
 1 in stock $88.99
Click for better price!
quote 593468
Cat: 593467 Rel: 21 Dec 15
 
104hp synthesiser module case with built-in power
Notes: In 2009 Tony designed the first Skiff to complement the vertically oriented cases available at the time by providing an ergonomic enclosure for our Rene and Pressure Points touch controllers.

Today the Make Noise Skiff provides a smart way to build a small modular synthesizer. It is low cost, but extremely durable. The clean simple lines and matte black color place visual emphasis where the action is: the patch the artist has created. At one side there is a power button and the Make Noise logo is illuminated to show the power is ON.

Ships ready to use. Just add modules, patch cables, and inspiration.
Read more
 4 in stock $230.99
Click for better price!
quote 593467
Cat: 712006 Rel: 30 Nov 18
 
Make Noise power supply
Notes: Power supply for Make Noise Skiff cases. Model VEC40US15.
Read more
 3 in stock $28.60
Cat: 726844 Rel: 04 Apr 19
 
5 x Make Noise style rogan knobs, small
Notes: Make Noise knobs.
Read more
 3 in stock $11.64
Cat: 638949 Rel: 31 Jul 17
 
Experimental sampler module - record, slice & rearrange audio material
Notes: The Morphagene is a next generation tape and microsound music module that uses Reels, Splices and Genes to create new sounds from those that already exist. Search between the notes to find the unfound sounds.

A few of the Morphagene's most basic uses: Splice recorded audio and jumble it using ORGANIZE. Manipulate playback speed and direction with Vari-Speed. Granularize with Gene-Size and Slide. Layer or Stagger Genes using MORPH. Undertake iterative music processes by recording manipulations and overdubs into new Splices, like having two machines (one for Playback and modulations, one for Record). Process sound in real time using Time Lag Accumulation. Utilize envelope following CV OUT and EOSG Trigger to engage Morphagene in conversation with the rest of your modular system. Stretch and squash sound with Clock input.

Width: 20hp
Max Depth: 30mm
Power: 165mA @ +12V, 20mA @ -12V

***MG137 Firmware Update:

Change Log

1. Improves Vari-Speed response for slow modulation rates.

2. Improves SD Card file format for more compatibility with software .wav file formats.

3. Doubles total record time per Reel.

Upgraded memory performance offers an increase from 1.45 minutes to 2.9 minutes of record time.

If you are using Splices that are over 1 minute long the SLIDE parameter will be scanning across a massive amount of material and therefore the longer the Splice the longer it will take to get to where you are Sliding toward. Imagine a tape machine shuttling forward or backward to get to your desired destination. No we cannot change this, the MG is scanning as fast as possible. This new double record time firmware will make this even more of a factor.

Read and Write times will be MUCH longer when you have a Full 2.9 minute reel. So for example, if you decided to erase a 5 second Splice in the middle of a 2.9 minute reel it will take twice as long as before because the MG must re-write the entire 2.9 minute reel. Of course all of this is happening in the background and should not cause too much hassle. Still when that SHIFT button is flashing it is best to not perform more SD Card actions.

For most granular processing Splices of 10 seconds or less are recommended.

So why even bother increasing record time to 2.9 minutes? Well it allows for storing even more Splices on a Reel and it also makes it possible to record long portions of a patch for later arranging within your DAW. You could potentially capture a patch, including modulations of a shorter Splice (say 10 seconds), retrieve the sound from the SD Card and compile into a larger work using your DAW.

4. Increased max number of Splices to 300.
Read more
 2 in stock $503.29
Cat: 557453 Rel: 19 Dec 14
 
Compact voltage controlled oscillator (VCO) module specifically designed for generating SINE waves
Notes: A compact Voltage Controlled Oscillator designed for generating SINE waves, Variable wave-SHAPEs, SUB-Octaves, Oscillator SYNC and Linear FM in the analog domain.

The Sub-Timbral Oscillator is the more subtle and melodic friend to the DPO's complex harmonic lattice.
Read more
 3 in stock $199.19
FORTHCOMING
Make Noise Tape & Microsound Music Machine Stereo Skiff System
coming soon TBA
Cat: 598833 Rel: 25 Feb 16
 
Time shifting clock synth module with 6 simultaneously programmable and patchable clocks - 10HP wide
Notes: ***NEW revision TEMPI firmware tempi11 improves External SYNC and RUN/ STOP behaviors. Download here today - http://www.makenoisemusic.com/content/patchsheets/tempi11_firmware_update.zip***

TEMPI is a 6 Channel, polyphonic time-shifting clock module. It provides an intuitive method for creation and recall of complex clocking arrangements within a modular synthesizer system. Using HUMAN and/ or MACHINE programming you could re-create most classic Clock Divider and Multiplier arrangements and then continue on to create new ones. Store up to 64 for later recall and Select them using control signals from within your system or the Select Bus.
Read more
 1 in stock $252.17
FORTHCOMING
Make Noise X Pan 5 Channel Voltage Controlled Crossfader, Panner & Stereo Mixer Module
coming soon $267.00
FORTHCOMING
Make Noise XOH Stereo Line Headphone Amp Module
Cat: 732818 Rel: 01 Jul 19
coming soon TBA
Items 1 to 41 of 41 on page 1 of 1

Filter

Make Noise
Release Date
Release Title
Close