安全购物

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

安全购物

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Pittsburgh Modular

首页  Labels  

Pittsburgh Modular

Options
Items 1 to 5 of 5 on page 1 of 1
Cat: 758645 Rel: 16 Dec 19
 
6HP Eurorack voltage-controlled delay module
Notes: The Analog Delay Unit is based on the design created for the Voltage Lab synthesizer module. A finely tuned circuit designed to enhance the source material by adding depth and warmth.

Module Overview:

The Analog Delay utilizes a pair of 4,096 stage BBD chips to produce a voltage controllable analog delay signal. Clean delay time can vary from 16ms to 340ms. The maximum delay time can be increased using the TIME CV INPUT delay time maxes out at 465ms but the increased time comes at the cost of fidelity and a bit of high frequency clock noise bleed. The name BBD stands for bucket brigade device in reference to a line of people passing buckets of water to quickly extinguish a fire. Each stage of a BBD chip contains a single capacitor. Pairing two chips together creates a chain of 8,192 capacitors. Like the water buckets, an audio signal is passed from capacitor to capacitor within the BBD chips once every clock step. A slower clock produces a longer delay and a faster clock produces a shorter delay.

Delay time:

Delay time is set by adjusting the DELAY TIME SLIDER. Moving the slider up increases the delay time. Delay time can be voltage controlled by patching into the DELAY TIME CV INPUT JACK and adjusting the DELAY TIME CV TRIMMER. The DELAY TIME CV TRIMMER is an attenuverter. That means the incoming signal is off when the trimmer is set to the 12 o'clock position. Turning the attenuverter to the right passes the original signal through. Turning the attenuverter to the left passes an inverted version of the original signal through. Turning the DELAY TIME CV TRIMMER to the right will increase the amount of CV passed through to the delay time. Turning the DELAY TIME CV TRIMMER to the left will increase the amount of inverted CV passed through to the delay time. Locating the exact off position of an attenuverter can be difficult. The easiest wave to remove the CV signal from the signal path is to simply remove the patch cable patched into the DELAY TIME CV INPUT JACK.

Feedback:

The DELAY REPEATS SLIDER sets the amount of repeats created by the delay. Moving the DELAY REPEATSSLIDER all the way down will produce 1 repeat. Adjusting the slider up increases the number of repeats until the delay begins to self-oscillate.

Output Mix:

The DELAY MIX KNOB acts as a balance control between the dry incoming signal and the wet delayed signal. Turning the DELAY MIX KNOB to the left weighs the output toward the dry signal. Turning the DELAY MIX KNOB to the right weighs the output toward the wet signal. In theory, setting the DELAY MIX KNOB at 12 o'clock creates an even mix of the wet and dry signals. In reality, the tolerance of the potentiometer, waves shape, and dry signal level all influence the location of an even 50/50 mix.
Read more
MRP:$233.36 SAVE 17%
 3 in stock $194.47
Cat: 732131 Rel: 20 Jan 20
 
interactive touch control module
Notes: Proper hands-on modular expression here. Two pairs of five multi-dimensional touch pads with configurable CV and gate outputs for monophonic or duophonic control of oscillators or modulation of pretty much anything else.

Supplier's notes:
Intuitive and inspiring, the Lifeforms Touch Controller replaces the creative restrictions of a traditional chromatic keyboard with a set of fully configurable multi-dimensional touch pads. A configurable duophonic controller that utilizes two sets of five touch pads to offer a flexible and interactive performance surface. Performances can be interpreted with a unique combination of monophonic and duophonic responses. The Channel Animator functions quickly generate complex sequences. Intuitive and inspiring, the Lifeforms Touch Controller is the perfect interface for an experimental journey.

Easy to use, the interface is split into Left and Right sides. Each side offers a gate output, assignable CV A output, assignable CV B output, and touch position Y-Axis output. CV A is set using the top row of knobs and CV B uses the bottom row. A third set of outputs called "All" responds to both Left and Right sides.

The Channel Animator section controls the sequencers and modifies the functionality of the Touch Controller. Mono and Duo buttons switch between monophonic and duophonic modes. The Rest/Reset/Division button is used by the sequencers to add rest notes, reset, and change the clock division of a sequence. The Scan CV input responds to a 0-5v signal and assigns the active monophonic or duophonic channels based on the incoming voltage. Scan can be used to create various cycling arpeggiator or random sequences. The Reset gate input resets the sequencer to the first step. Step gate input advances the sequencer.

Enter Monophonic Mode by pressing the Mono button. In Monophonic mode the All output section responds to the selected channel. The Left section and the Right section respond when a channel in their section is pressed.

A single sequencer has access to all 10 channels. The sequence is performed in the order the notes are entered. Press and hold the Mono button then tap a series of channel touch pads to create a sequence. While holding down the Mono button during programming, pressing the Rest/Reset/Division button adds a rest to the sequence. Once a sequence is created, press and hold the Rest/Reset/Division button then tap a Channel Touch Pad to change the clock division left to right from #1 to #10. A sequence is clocked with the Step gate input jack. The Reset gate input resets the sequence to the first step. To stop the sequence, press and release the Mono button without touching a Channel Touch Pad.

Enter Duophonic Mode by pressing the Duo button. In Duophonic mode the All output section mixes the outputs of both the Left and Right selected channels creating interaction and transposition between the Left and Right sections. The Left and Right output sections respond when a channel in their section is pressed.

In Duophonic Mode, the Left and Right sections each have their own sequencer. Sequences are performed in the order the notes are entered. Press and hold the Duo button then tap a series of Channel Touch Pads on the Left and Right sections to create the sequences. While holding down the Duo button during programming, pressing the Rest/Reset/Division button adds a rest to the last selected sequence. Once the sequences are created, press and hold the Rest/Reset/Division button then tap a Channel Touch Pad to change the clock division left to right from #1 to #8. The Left 5 channel touch pads set the division of the Left section and the Right 5 channel touch pads set the division of the Right section to #1, #2, #3, #4, #8. Sequences are clocked with the Step gate input jack. The Reset gate input resets both sequences to the first step.
Read more
MRP:$465.46 SAVE 15%
 1 in stock $394.17
Click for better price!
or call +44 20 7424 1960
quote 732131
Cat: 677576 Rel: 03 Jul 18
 
Compact, desktop monophonic synthesiser featuring a pre-tuned analogue oscillator
Notes: A Love Letter to the Analogue Monosynth:

A modern, semi-modular synthesiser inspired by the instruments designed by our heroes. The Pittsburgh Modular Microvolt 3900 takes a new approach to building a raw, analogue monosynth with a host of unconventional and inspirational features. Patch cables optional.

Creative Synthesis Design:

With our new temperature stabilized, dual VCA oscillator core, the analogue audio engine of the Microvolt 3900 feeds a set of timbral waveshapers crafted for deep harmonic shaping, enabling a layer of additive synthesis alongside the classic subtractive synthesis waveforms. Waveforms are fed into our binary filter, a custom state variable filter architecture offering near infinite resonance with or without self-oscillation. Sonically this creates a juicy, fluid filter adding depth and energy to the oscillator that can scream if you ask it to.

The heart of the Microvolt 3900's sound is our new dynamic VCA technology. Where a standard VCA works in two dimensions, the Microvolt 3900 dynamic VCA technology adds a third dimension. As the dynamic VCA closes, decreasing the amplitude, harmonics are removed from the source. As the dynamic VCA opens, the harmonics are restored. This mimics the behaviour of sounds in nature. The result is a lively, organic sounding synthesiser full of energy. The design of the dynamic VCA also allows the instrument to be plucked or struck, opening up another set of percussive musical possibilities.

Open Electronic Experimentation:

The Microvolt 3900 is patched internally and does not require patch cables to dial in a wide variety of unique and powerful sounds. For deeper experimentation, the Microvolt 3900 includes a 39-point Eurorack format friendly 1/8" jack patchbay for complete signal routing control over a full complement of audio and modulation options. A four-stage envelope generator, multi-purpose function generator, wide range LFO, chaotic random source, arpeggiator, sequencer, and MIDI to CV control are also available to create dynamic sounds unique to the Microvolt 3900.

Includes:

- 5 Nazca Audio brand patch cables
- MIDI connector cable
- Universal DC power adapter
Read more
MRP:$952.36 SAVE 37%
 1 in stock $604.41
Cat: 637382 Rel: 17 Mar 17
 
Eurorack modular synthesiser case - 270HP of module space
Notes: Eurorack modular synthesizer case designed to meet the demanding requirements of project and professional studio environments. The Structure EP-270 provides massive amounts of clean, quiet power housed in beautiful, angled hardwood enclosures, full of classic synthesizer styling.

Uncompromising power and craftsmanship combine to create this stunning studio case. The Structure EP-270 offers 270HP of module space with a combined 9 amps of robust power.
Read more
MRP:$800.99 SAVE 14%
 1 in stock $691.66
Click for better price!
or call +44 20 7424 1960
quote 637382
Cat: 598242 Rel: 08 Mar 16
 
Hand-stained all hardwood eurorack synth module enclosure with power - 360HP of space
Notes: ***POWER SET FOR EU AND AUSTRALIA 220-230V:
The Pittsburgh Modular Structure 208 and Structure 360 eurorack enclosures use a switching power supply that needs manually set to the correct AC input voltage. The internal switch has already be properly set for 220-230 VAC. This setting works for the EU and Australia or other countries that use 220-230 VAC power.
For use in countries that use 100-120 VAC power, such as North America and Japan, the switch inside the case on the AC/DC regulator needs to be switched to the left. The switch is marked with a Yellow sticker printed with "AC input voltage can be selected by switch. Check input voltage avoiding damage before power on." The switch is located on the side of the enclosure below the arrow.
Please contact Pittsburgh Modular with any questions. service@pittsburghmodular.com***

Structure EP-360 Eurorack Enclosure

Maximum Power for a New Generation -

Beautifully stained hardwood triple row, 360hp powered eurorack travel case with lid. A huge case to house a monster synth. Features include a professional, heavy duty, internal power supply designed to exceed the needs of the most demanding analog and digital eurorack systems.




Everything is New:
With years of research and two case lines under our belt, we decided to start over and produce a line of cases for the next generation of eurorack synthesizers. The eurorack modular ecosystem is expanding faster than ever and manufacturers are constantly pushing eurorack cases and power supplies to the limits. What started as a power supply designed to drive primarily analog synthesizers has transformed into a supply that needs to simultaneously meet the unique demands of sensitive analog circuitry, power hungry digital processors, and ground sensitive user interface modules.

We started with what matters most. Clean power. A lot of it. Up to 3x the amount of clean power available in cases from other brands. Next we turned our focus to the enclosure itself and there was only one goal. Make the case stronger. Our engineers tested countless combinations utilizing different types of wood, joints, adhesives, assembly techniques, and hardware to ensure that Structure cases are as durable as they are beautiful.

With a clean and gorgeous design that promotes creative exploration, the Structure enclosures are our most robust and refined case line yet. With massive amounts of both room and clean power, you can reach completely new heights in your creative performances.






Includes:
Structure EP-360

Power
:
6 Amps of Clean +12v Power

6 Amps of Clean -12v Power

5 Amps of Clean +5v Power

Custom Powered Bus Board with 15 Keyed Eurorack Power Headers Per Row, 45 Power Headers Total

External On-off Rocker Power Switch with LED

Universal IEC Power Connector Works Anywhere

Structure EP-360 Enclosure
:
Hardwood and Steel Construction (No cheap plastic here)

Triple 120hp Rows

Removable Lid

Lid Fits Over Fully Patched System (No need to remove patch cables)

Edge to Edge Rail Design Reduces Gaps Between Modules and the Side of the Case

24 Smooth Sliding Square Nuts Per Rail (Holds up to 72 modules)

Beautifully Hand-Stained Hardwood

Matching Black Steel Hardware Set




Structure EP-360 Dimensions
:
External Depth with lid:9 1/4"
External Depth without Lid: 5 1/2"
External Height: 17"
External Width: 25 1/2"
Internal Depth Above Power Supply: 2 3/4"
Internal Depth Above Bus Board: 3 3/4"
Internal Depth Above Nothing: 4 1/4"
Read more
MRP:$1,108.77 SAVE 27%
 1 in stock $808.34
Items 1 to 5 of 5 on page 1 of 1

Filter

Pittsburgh Modular
Release Date
Featured
Close