A great little board to interface the NS1nanosynth to your eurorack devices. The Nanobridge includes 14 protected patch points that interfaces to 3,5mm jacks.
The NS1nanobridge is the definitive companion that allows the NS1nanosynth to interface to any eurorack or other modular system. With its 14 3,5mm jacks and optional protections on signals, the NS1nanobridge is the best solution to spread the nano strain.
You have, for each connection, a protected and unprotected nanopatch header. To have a fully working protected connection from the external system to the NS1nanosynth (that handles 0V to 5V voltages) connect the 0V and 5V nanopatch points to the same patch p0ints on the RIGHTMOST connector header on the NS1nanosynth. This way you will limit the excursion of the incoming signal from 0V to 5V. To achieve this we put a resistor-diodes limiting circuit on each pin. Alternatively, and this is useful for two purposes: outgoing signals (from NS1 to modular) and incoming V / oct pitch, you can use the 'unprotected' header side.
A note about the compliance. Keep it always safe! if you don't know what is the voltage range of the incoming signal use ALWAYS the 'protected' side, after having connected the 0V and 5V.
The NS1nanobridge is shipped complete with four rubber feet.
If you decide an equipment item is not suitable within 10 days of delivery, you can return it to us for a replacement or refund. Returns must be unused and in their original, undamaged packaging.
Some items are excluded from our money back guarantee, including:
• Computer software that has been unsealed or registered
• Any item that comes directly into contact with the nose, ears or mouth
To arrange a return, just contact our customer service department on 020 7424 2800 or email us at email@example.com