安全购物

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

安全购物

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

View:
Options
Items 1 to 17 of 17 on page 1 of 1
Cat: 743610 Rel: 23 Sep 19
 
Complex quad multimode filter - 20HP
Notes: Mad dual-channel filter with two peaks per channel. Chain the sides together for complex filter curves, process stereo sounds or even turn up the resonance for four self-resonating peaks.

Supplier notes:
The Stereo Dipole is a Quad Multi-Mode VCF featuring single, dual and quad peak filter outputs.

Designed to be clean or characterful, the Stereo Dipole is not intended on achieving any one type of sound. From clean frequency-based panning to complex phasing and formant synthesis and over-driven squelchy bass lines, Stereo Dipole offers an environment which is simple enough to use, while providing the versatility to push your sounds into unknown territory...

Comprised of two identical filter sections that can be used independently via the dedicated Resonance (RES), Primary Cutoff (FREQ) and Secondary Cutoff (SPREAD) controls as well as in tandem via the STEREO FREQ and STEREO RES controls in the centre of the module.

Both the Left and Right Channels feature Single Peak POLE and Dual Peak DIPOLE outputs.

High Pass, Low Pass and Band Pass outputs are individually selected via the switches, situated above POLE and DIPOLE.

The Dual Peak DIPOLE output can be routed either in Series or Parallel with the main POLE VCF while maintaining all possible configurations of the Selected Filter Types.

Series and Parallel combinations will provide capabilities such as 24dB/OCT HP/BP/LP, Variable Width Band Pass and Notch as well as other obscure filter combinations.

FREQ controls the Cutoff of both the Primary and Secondary VCF while SPREAD is used to Match (centre position) or Offset the Secondary Cutoff Frequency by +/-5 octaves..

DIPOLE AB is a Quad Peak Monophonic Output, sharing the same Routing and Topology combinations of the four VCF cores.

The A input (LEFT) provides Normalization into the B input (RIGHT), allowing for a stereo image to be created from any monophonic signal source. All four A/B outputs can be utilized in stereo for more complex stereo filtering applications.

Pre-Filter Input DRIVE Control on each channel will push the input signal into heavy soft-clipping and saturation; adding Harmonic Content and increased low end for the VCFs to bite into. A Sine Wave can be over-driven enough to be useful with pleasing results.

RESONANCE may be nuanced or pushed all the way into Self-Oscillation across the entire bandwidth of 20+ Octaves.

All VCF cores Track 1V/OCT and Temperature Compensated.

The Stereo Dipole can fully function as a Single, Dual and Quad Sine Wave VCO/LFO.

The Series Routing configuration allows for additional tonal oscillation capabilities via the DIPOLE and DIPOLE AB outputs.

In addition to the A, B and Stereo 1V/OCT Inputs, the SPREAD CV Inputs may also be used as direct and accurate 1V/OCT control of the Secondary Peak on each channel.

Individual and Stereo Control Voltage inputs including Attenuators for STEREO RES, RES A/B and STEREO FREQ as well as Polarizing Attenuators for each Channel's FM CV input.
Read more
 4 in stock $388.93
Click for better price!
quote 743610
Cat: 732823 Rel: 05 Sep 19
 
Nutube-based distortion module - 18HP
Notes: Gloriously grimy valve distortion for Sonocurrent's Eurorack debut. Subtle saturation through to filthy self-oscillation via Korg's low-power Nutube triodes. Nasty but nice.

Supplier notes:
The M T2D dual triode distortion is a Nutube-based distortion module for the Eurorack format, offering two independent channels which can be patched separately for parallel processing, stereo, or multiple sources, or used in series for more complex distortion of a single source (or simply extreme distortion settings).

Spectral tilt filters before each triode stage alternately boost or cut high and low frequencies for different harmonic emphasis. These filters also affect the feedback loops, and can interact in very interesting ways with high feedback settings. The individual tube bias controls can also have a strong influence in combination with high feedback levels, in addition to more subtle shaping of the distortion when feedback levels are low.

Independent control of input level, tube bias, feedback level, and dry/wet mix is available for each channel, with CV inputs for the bias and mix controls. The CV inputs for the mix controls also have dedicated attenuators. A global plate voltage switch offers two different character options, for either smoother distortion or more severe clipping.
Read more
 3 in stock $346.77
Cat: 732306 Rel: 09 Sep 19
 
Stereo thru-zero state-variable VCF - 16HP
Notes: The only module named after a Swedish botanist? Possibly. Relentless synth innovator Dave Rossum pushes the boundaries again with a state-variable stereo filter offering through-zero frequency modulation. Sounds complicated. Sounds good.

Supplier notes:
Following in the tradition of Evolution and Morpheus, LINNAEUS represents yet another Dave Rossum innovation in filter technology.

LINNAEUS is a stereo state-variable filter that provides the unique ability to linearly modulate its resonant frequency through zero into negative frequency, while maintaining stability. With extensive voltage control of nearly every parameter, Linnaeus lets you manipulate the filter's natural response curve in new ways, to create both subtle and dramatic timbral effects. And with a "one-knob-per-parameter" interface, LINNAEUS inspires sonic creativity that invites (and rewards) real-time interaction.

LINNAEUS's cutoff/resonant frequency is exponentially voltage controllable from sub-audio to ultrasonic frequencies, while its resonant gain (Q) is exponentially voltage controllable from 0dB to greater than 60dB.

LINNAEUS's channel output response characteristics are independently and continuously variable from Lowpass, through Bandpass, Highpass and Notch, to Low and High Shelving characteristics. Voltage control of the response characteristics are independently selectable for each of the two channels.

The linear thru-zero modulation is provided by an integrated modulation oscillator and/or an External Linear FM modulation input.

The voltage-controllable modulation oscillator can track the filter's exponential frequency or operate independently. The modulation oscillator's output waveform is continuously variable from Off through Sine, Triangle, and Sawtooth, to Square. The modulation oscillator output is summed with the external linear FM input and applied to the modulation index VCA, which controls the linear thru-zero modulation index from zero to 8X. The modulation index is, of course, also voltage controllable.
Read more
 4 in stock $399.47
Click for better price!
quote 732306
Cat: 745934 Rel: 19 Sep 19
 
Dual attack generator featuring two ASR envelopes with linear voltage curves
Notes: The Model 180 is 100% discrete transistor core dual channel A/D A/H/D function generator (envelope). A trigger or gate signal greater than 2.5v at the "trigger" input causes the output CV to linearly ramp up to its maximum value at a speed set by the "attack time" pot. Once reaching the maximum CV output (set from the factory at 5v but easily adjustable via trimmer) the module will hold at this level for a static duration set by the "note duration" pot, or will hold at its maximum level as long as the trigger input is high. This behaviour is selected with the "controlled internally" vs. "controlled by trigger length" switch. At the end of the "hold" period the CV output will ramp back down to approximately 0v at a rate set by the "decay time" pot.

Like many "west coast" function generators, the envelope cannot be retriggered until the attack phase is complete, allowing for some function as a clock divider etc. The attack, hold, and decay times can be set very fast, and the module can easily create percussive blips as well as longer drawn out envelope shapes.
Read more
 1 in stock $411.05
Click for better price!
quote 745934
Cat: 745932 Rel: 19 Sep 19
 
Dual sine-sawtooth generator based on Model 158 from the Buchla 100 series
Notes: The Model 158 is a dual oscillator created out of an entirely discrete transistor core. It consists of two independent and identical sides each with a front panel tuning knob, a frequency modulation input and attenuator, and a knob to fade smoothly between saw and sine waves. The RED PANEL model 158 is based off of the original "A" variant of the 158 oscillator.

The 158 was one of the very first voltage controlled oscillators ever produced. As such it contains many particular quirks/rawness of this first generation of synthesis. The exponential scaling of the oscillator is far from accurate, there is no temperature compensation, quick changes in pitch produce a slewing effect, and the saw waveform only vaguely resembles a saw wave through part of its range. It is as accurate a recreation as we believe is possible with the components available today. We performed hundreds of listening tests to find suitable replacements for obsolete transistors, and hand select multiple transistors on each individual unit to ensure that they have the proper sound.
Read more
 3 in stock $473.25
Cat: 745929 Rel: 19 Sep 19
 
Control voltage processor - 14HP
Notes: The 156 is an accurate reproduction of the original 156, however it's accuracy also means that it's functionality is based entirely on the needs of a cohesive system designed in the mid 60's. It cannot work with negative voltages, the maximum gain is set at 1:1, and the transistor core makes it inherently nonlinear.

The 156M is a modern update of the original 156 that we feel both works within the paradigm of the original 100 series and helps to interface with modern Eurorack gear. Like the 156, the 156M consists of two independent voltage processors. Each side can mix between 2 independent control voltages. This mix can then be offset by either a positive voltage or (unlike the original) a negative voltage. The mixed and offset control voltages can then be attenuverted - which allows the user to set the gain in either a positive or negative direction and can also boost the gain to approximately 1.5x the original signal. In essence, the combination of these three facilities allow you to mix, offset, compress, expand, invert, amplify, or scale any CV source.
Read more
 1 in stock $305.65
Click for better price!
quote 745929
Cat: 745931 Rel: 19 Sep 19
 
Control voltage processor - 14HP
Notes: The Model 156 was likely the first "CV manipulation" tool ever available to modular synthesists. In the original 100 series environment, the 156 was used as a front end to nearly every other module with a CV input. The majority of CV inputs throughout the 100 series do not have associated attenuators or offsets built into the modules, and thus they relied on the 156 to scale, offset, and attenuate the voltages traveling around the system. The 156 consists of 2 independent "voltage processors" Each with a control to mix the two inputs, add a voltage offset (positive only), and then a control to mix between the external CV to be processed and the internal offset. In addition, the "B" channel has an inverting input. The 156 is as close a replica to the original 156 as possible, and is built entirely of discrete analogue components.
Read more
 1 in stock $305.65
Click for better price!
quote 745931
Cat: 745927 Rel: 19 Sep 19
 
Quad VC Gate - 14HP
Notes: The Model 110 is 4 independent transistor based voltage controlled amplifiers behind one panel. Each VCA (or "gate" in the original terminology) consists of an audio input with an attenuator, a CV input, and 2 outputs. The VCA's are AC coupled - meaning that they will not pass slow (or static) control voltages. The VCA's are calibrated to unity (an input of a 10v peak to peak audio wave, will produce a 10v peak to peak audio wave at output) when 5v is applied to the CV input and the attenuator is at approximately the 3'oclock position.

Notes: Unlike the later (and better known) Model 292, the original low pass gate - the Model 110 is entirely transistor based (rather than vactrol based like the 292), and is much faster.
Read more
 1 in stock $411.05
Click for better price!
quote 745927
Cat: 745924 Rel: 19 Sep 19
 
6 channel mixer based on the mixer of Buchla’s 100 series
Notes: The Model 106 is a 100% discrete transistor based 6 input audio mixer.

Functionally, it allows the user to manually mix 6 signals into 1 output (All), or it may be used as 2 independent 3 into 1 mixers ("1-3" side and "4-6" side).

Aurally, the all transistor signal path adds its own unique sonic signature, imparting a subtle lo-fi warmth and saturation to the sound.

Additionally, the "All" output is inverted with respect to the "1-3" and "4-6" outputs. This feature can be exploited to creative effect.
Read more
 1 in stock $305.65
Click for better price!
quote 745924
Cat: 740273 Rel: 02 Oct 19
 
32 step sequencer with fractal-like pattern generation
Notes: If we're honest we don't really understand fractals. Something to do with maths, apparently. But that doesn't really matter because we do understand this sequencer module, which is ideal for randomly twisting and morphing sequences.

Supplier notes:
Bloom is a fractal sequencer capable of generating infinitely evolving melodies with a host of musical features.

At its core is a powerful 32 step sequencer with two independent channels and an intuitive interface. What makes the Bloom come alive are its fractal algorithms which can transform existing sequences into powerful melodies, or even generate new patterns altogether. The base sequence is known as the Trunk and can be programmed by hand, or automatically generated with the Mutate function. Once a Trunk sequence is in place, fractal transformations are only a knob turn away by using the Branch and path controls. Each new Branch adds a complete variation to the base sequence and Path determines its passage through the set of recursively generated sub-sequences, offering a unique take on the melody with each turn of the knob.

Bring your sequencing to life with Bloom.
Read more
MRP:$403.47 SAVE 17%
 4 in stock $336.23
Click for better price!
quote 740273
Polyend Preset Module (synth module)
Cat: 732317 Rel: 11 Sep 19
 
Macro controller & sequencer - 22HP
Notes: Presets on a modular? Sacrilege! Or the best of both worlds, depending how you look at it. We'll probably go with the latter, because this is a super versatile little programmer/sequencer/preset storage module.

Supplier notes:
The 22 HP interface is simple, clean and streamlined. At first glance, Polyend Preset module might look like simple a digital preset manager for Eurorack systems, but it's much more than this. Its vast implications make it a very smart companion for your modular system. But let's start from the basics. With the use of 9 LED coloured clickable encoders, Preset allows you to store up to 9 different CV output values in 32 banks of 32 presets. Yep, 1024 in total!

It's capable:

Program the notes sequences using one of the 32 build-in musical scales. Record the automation using the encoders or external source.

Four modes, totally different possibilities:

Depending on what you want to achieve, there are four modes you can choose from: First, Next, Channel and Note.

Both First and Next modes are perfect for building your unique polyphonic synthesizer.

The Channel mode lets you choose which MIDI Channel is responsible for which voice. This mode is what the majority of users utilise to connect DAWs or external sequencers.

The Note mode translates data received from MIDI Notes C through G and directs them into the corresponding voices (no matter the octave). This scenario works excellent for triggering drums from drum pads or drum triggers.
Read more
 9 in stock $394.20
Click for better price!
quote 732317
Cat: 732315 Rel: 11 Sep 19
 
MIDI-CV converter module for Eurorack - 14HP
Notes: Eight-voice modular synthesis? Yes please. Updated version of the Poly splits your MIDI signal to CV and gate for fully polyphonic action. Chain multiple units for even more multi-voice madness.

Supplier notes:
The Polyend Poly 2 module is a polyphonic MIDI to CV converter Eurorack module, and it will change how you interact with your sequencers, controllers, DAW, and more. This powerful module features MIDI I/O plus USB A and USB B inputs, with a total of four Gate outputs, four Pitch outputs, and 12 outs for CV (CC 0-127) signals. And using the Smart Thru connection, you can daisy-chain multiple Poly 2 modules together for even more voices. And Sweetwater was excited to report that Poly 2 is even compatible with the MPE (Multidimensional Polyphonic Expression) standard used in innovative controllers such as the Roger Linn Design LinnStrument and the ROLI Seaboard series. Once you've explored the polyphonic expression the Polyend Poly 2 module is capable of, you'll never want to be without it.

No matter what kind of MIDI controller you use - keyboard, ribbon controller, pressure pad, or whatever - the Poly 2 module offers built-in scale filtering rewards you with highly musical output. Select a scale, and only the notes within that scale will be passed along to your patch destinations. This is different from scale quantization, which forces ANY input to trigger the note its closest to in the scale, and can make it much more enjoyable to use alternative MIDI controllers with the Poly 2 module.
Read more
 7 in stock $323.58
Cat: 731183 Rel: 30 Aug 19
 
5U version of the Noise Engineering dynamic wavetable oscillator
Notes: Cursus Iteritas Magnus is an oscillator that works from a dynamically generated wavetable. It gives the user spectral-like controls over three different modes based on different conceptualizations of frequency: Fourier, which uses sine waves; Daubechies, using wavelets; and Walsh mode, using the Walsh transform. Cursus Iteritas Magnus parametrizes a wide variety of sounds, but because the sounds are all based on orthogonal functions, it has a musical tone structure and can produce an extremely wide variety of harmonic sounds

Cursus Iteritas Magnus is the 5U version of Cursus Iteritas.
Read more
 1 in stock $407.89
Click for better price!
quote 731183
Cat: 751611 Rel: 08 Oct 19
 
Analogue-inspired parameterized drum synthesiser
Notes: Basimilus Iteritas Alter is a parameterized digital drum synthesizer with its roots in the analog world. At its heart, it is a simple six-oscillator additive synthesizer with adjustable waveform, harmonic spread and decay. Adjustable attack including a noise oscillator is also included. dLese are summed and fed into an in..nifolder for crunch and variety.

Basimilus Iteritas Alter is an improved version of Basimilus Iteritas. It is 2HP smaller, includes CV of switches, adds an third mode, and pitch range and knobs know offset rather than attenuate.

Size: 10HP Eurorack
Depth: 1.5 Inches
Power: 2x8 Eurorack
Draw +12V: 150 / 80
Draw -12: 5 / 5
Draw +5v: 0 / 90
Read more
 1 in stock $330.95
Cat: 731184 Rel: 02 Oct 19
 
5U version of the Ataraxic Iteritas
Notes: Ataraxic Iteritas Magnus is an extension of the first Eurorack module, the Ataraxic Translatron. AIM starts with one of three bit tables shaped via variable interpolation that is then scrolled through, amplitude modulated, folded, and distorted by the CV-controllable front panel controls. Subby basses, metallic drones, unrelentingly digital timbres and more are all to be had from the AIM. Ataraxic Iteritas Magnus is the 5U version of the Ataraxic Iteritas. Guaranteed to make the fax machine jealous on an even bigger scale.
Read more
 1 in stock $437.41
Click for better price!
quote 731184
Cat: 745786 Rel: 09 Sep 19
 
52HP 8-channel, 16-step-button Eurorack step sequencer with breakout modules
Notes: A-157 is a trigger sequencer subsystem that generates eight trigger signals controlled by a 8x16 LED/button matrix (some customers call it "Miniature Schaltwerk" as it is based on the same matrix as the no longer available Schaltwerk).
The subsystem contains three modules:

A-157-1: 8 x 16 LED/button matrix and function addressing buttons/LEDs
A-157-2: Trigger Output module
A-157-3: Control Inputs module

The LED/button matrix module A-157-1 is the core of the subsystem. It is used to set or reset the trigger event on each of the 16 steps of each of the 8 rows. In addition the buttons and LEDs of the matrix are used for other functions too (like setting the first and last step of each row or addressing the preset memory).

The Trigger Output module A-157-2 outputs the 8 trigger signals and has an LED display for each trigger available.

The Control Inputs module A-157-3 has manual controls and trigger inputs available for the basic control functions start, stop, reset and clock. In addition four functions inputs are available which will be used in future firmware versions to assign these inputs to special functions (e.g. shifting a row left or right by means of an external gate/trigger signal or a second set of start, stop, reset and clock for individual rows).
Read more
 1 in stock $494.33
Click for better price!
quote 745786
Cat: 745784 Rel: 09 Sep 19
 
Analogue sequencer for CV's & trigger/gates
Notes: The Doepfer A-155 has two CV rows, each with selectable voltage range, glide and sample & hold options. Three trigger rows and a one gate row. Logic inputs for clock, reset, start and stop. It's even possible to insert external signals per step instead, overriding the CV generated by the 2nd row's potentiometer. The A-155's functions can be expanded by the A-154 Sequencer Controller, as it's an entire control unit with step number limitation, voltage controllable clock generator, variable gate length and a number of playback modes.

Features of the analogue rows (knobs):

- 8 potentiometers (knobs)
- Lower row: Scale (knob), voltage output range 0 ... ~ +6,5V
- Upper row: 1V/2V/4V (octave range switch for exact VCO control), voltage output ranges 0 ...1.0V / 0 ...2.0V / 0 ...4.0V
- Glide time (knob), same as portamento or slew limiter
- Glide Control (control input for switching glide on/off)
- S&H Control (control input for internal S&H, works like A-148)
- Pre Glide/S&H-Out (analogue output before S&H and glide unit, especially required when external audio signals are used as inputs of the lower row)
- Post Glide/S&H-Out (analogue output after S&H and glide unit)
- Lower row: external inputs for the 8 steps (switched jack sockets), control signals or audio signals may be used as inputs (allowed voltage range -5V...+12V), the knobs of the lower row are working in this case as attenuators

Features of the trigger rows (switches):

- 4 Trigger/Gate tracks with 2 rows of switches
- Toggle switches of 1-0-1 type (with middle position), which can be used to send a trigger/gate to the track above or below or to send no trigger/gate (middle position)
- 3 trigger rows (i.e. short pulse for each step set, pulse width corresponds to the pulse width of the clock/step input signal)
- 1 gate row (i.e. a high signal is applied during the length of the step set)

Control inputs and buttons:

- Step (defines the tempo of the sequence, same as clock or trigger input)
- Reset (resets all rows to step 1)
- Start (starts the sequence at the momentary position)
- Stop (stops the sequence at the momentary position)

Step and Reset are compatible to the MIDI interface A-190, i.e. in combination with the A-190 the A-155 may be synchronized via MIDI. The quantizing module A-156 can be used to quantize the infinite analogue voltages coming from A-155 into discrete semitone steps (multiples of 1/12V). Without MIDI interface e.g. a LFO rectangle output can be used to define the tempo of the sequence.

The sequencer controller A-154 adds a lot of new functions to the A-155 (e.g. voltage controlled addressing, forward/backward/pendulum/random mode, voltage control of first and last step, voltage controlled clock and gate length, step skipping, combination of several A-155 in parallel/serial mode and many more).
Read more
 1 in stock $310.92
Items 1 to 17 of 17 on page 1 of 1

Filter

Saved Searches
Save current search
Release Date
Featured
Close