搜索结果

Notes: A characteristically unique take on mixing from Buchla, with six mono inputs and a built-in mic/guitar pre-amp. Each channel can be cued to a monitor mix, while the first and last channels also include voltage-controlled panning.

Supplier's Notes:
The Tiptop 207t is a modern reimagining of the classic Don Buchla 207 Mixer/Preamplifier from the 1970s 200 Series. This stereo mixer comes with a built-in preamp that allows you to boost external instruments and microphones, making it a versatile tool for any modular setup. The 207t also features a six-channel mixer with a variety of signal routing options, including the ability to route channels to the monitor and L&R signal outputs, with per-channel control over loudness and panning.

Each channel has a Mon switch that sends the channel's signal to the monitor outputs, which are always full-volume and summed to mono, making it useful for basic monitoring applications or rudimentary mixing. The Prog switch sends the signal to the L&R signal outputs, with loudness controlled by the Level Adjustment slider and panning determined by the Channel Assignment knobs. The first and sixth channels offer voltage control of panning; these channels are hard-panned when no CV is applied.

The preamp section features a 1/4" input and multiple gain settings, making it suitable for use with external line level instruments, electric guitars, or dynamic microphones. The continuous amplification control provides added flexibility for your audio needs. Finally, the Expansion In is a stereo input that sums to the left and right main outputs, which is great for chaining multiple 207t modules or adding another stereo source at the final output.

While the 207t's functionality may be simple, it is an essential part of any 200t system, serving as the glue that holds everything together. The Tiptop 207t is a fantastic mixer/preamp option that delivers quality sound and reliable performance.

Buchla 207t Features

Mixer/preamp module based on Don Buchla's original 207 design
Six-channel mixer with per-channel level control and panning
Voltage-controllable panning on channels 1 and 6
Manual panning on channels 2-4
Program switches can act as channel mutes for main outputs
Mon switches route signal (in mono) to Monitor output
Expansion input useful for stereo chaining and more
Re-designed preamp for high audio fidelity
Preamp suitable for use with external instruments, electric guitars, dynamic microphones, and more

Eurorack module
28hp wide

Notes: Part of Xaoc's Leibniz Binary Subsystem, the updated Drezno ADC/DAC module builds on the original with higher resolution converters, allowing you to use it for pitch quantisation.

Supplier's Notes:
Drezno II is an improved version of the original Drezno module. It is an essential member of the 8-bit Xaoc Devices Leibniz Binary Subsystem. The Leibniz subsystem is a family of modules that operate on 8 binary (two-state, on/off) signals. These signals are arranged as 8 bits of digital data and may represent analogue signals and voltages, or they may be whatever you want them to be (clocks, gates, rhythms, etc.).

Drezno features an ADC (analogue-to-digital-converter) and DAC (digital-to-analogue-converter), allowing it to act as an analog front-end of the system. In other words, Drezno allows one to convert analogue signals and CVs into digital numbers, as well as to obtain analogue signals back from some other digital numbers (or 8 binary signals). Between these two conversions there is a whole universe of digital shenanigans waiting to happen resulting in all kinds of signal transformations and modulations.

Both (ADC and DAC) sections of Drezno can work independently, or they can be linked. Input and output range of analogue signals may be adjusted using Gain and Offset sliders. Individual bit outputs (for the ADC) and inputs (DAC) allow for extensive cross-patching and the creation of complex waveforms and rhythms. A very fast clock (up to 2MHz) at which the conversions are performed may be replaced with any external clock (for each section separately).

Compared to its predecessor, Drezno II uses new converters of much higher resolution which results in much lower noise floor and higher accuracy. The lower bits are much more stable than before. It is easy now to use Drezno for quantizing pitch voltages with accurate results with 128 or 256 semitone steps. Potentiometer ranges are factory calibrated for precise chromatic scale. A new switch on the front panel allows the user to select the calibrated range of 10Vpp or 20Vpp, so that the lowest bit or the second bit correspond to 1 semitone.

Technical details

Eurorack synth compatible
12hp, skiff friendly
Current draw: +80mA/-50mA
Reverse power protection

Notes: The Dual Stereo Gate (DXG) music synthesizer module is a Dual Stereo Low Pass Gate and Mixer. It follows in the footsteps of the QMMG, Optomix, RxMx, DynaMix, and LxD. Unlike its predecessors, the DXG is specifically oriented around mixing stereo signals, making it an important addition to any system containing modules like XPO, QPAS, Morphagene, Mimeophon, and other stereo modules by Make Noise or others.

Unique to the DXG is a new low pass gate circuit that does not use vactrols. This circuit is 100% analogue and its response was arrived at after many months tailoring it to meet or exceed the expectations that have been set by all the vactrol low pass gates that Make Noise has created over the years.

In the past, Make Noise produced the Dynamix module and Dynamics circuit in the 0-COAST, both of which are vactrolless LPGs; however, the DXG is a completely new approach which better implements the gentle single pole filtering of a low pass gate, while also emulating the slow decay and memory of the vactrol based low pass gate. This new circuit makes possible the consistency of response necessary for versatile stereo use, while also keeping the module small and affordable so that it can be a key part of just about any modular system.

As on all of Make Noise's low pass gates, the DXG's Control parameter is used to set both the amplitude and the frequency content of the sound that passes through it. The control parameter tends to open faster than it closes, imparting a subtle decay phase onto any envelope shape that is used to modulate it.

Unlike previous low pass gates made by Make Noise, all the DXG's inputs and outputs are stereo. Each set of inputs is normalled so that the left input can be used for a mono signal, sending a copy to both left and right outputs. The Auxiliary inputs are also a stereo pair with mono normalization. These normalizations allow for the DXG to be used as a simple three channel stereo mixer, with one or two of the channels additionally being used for dynamics control and note event generation. The Aux inputs can be used to chain together larger decentralized mixes using additional DXG modules, or X-PAN, Optomix, modDemix etc.

Features

- Make Noise's first Stereo Low Pass Gate

- Vactrol-free design for classic Low Pass Gate sounds, but with the balance and consistency needed for true Stereo

- Fully Stereo i/o for easy integration into a Stereo-equipped modular synthesizer

- All Left inputs normalled for easy use with Mono signals

- STRIKE Input allows use of Gate signal to trigger Low Pass Gate circuit, creating "plucking" or "pinging" sound from any Gate

- Summing stage with Stereo AUXiliary IN allows for chaining of multiple units, creating larger mixes

- Part of a decentralized mix console integrated throughout the system along with X-PAN, Optomix, XOH, etc.

- Pairs well with XPO, QPAS, Morphagene, Mimeophon, Spectraphon etc.

Width: 8hp
Power:
74mA @ +12V
86mA @ -12V
Module Depth (incl power cable): 43mm

Notes: A unique analogue take on granular synthesis, inspired by Yannis Xenakis, the Grainity pairs a granular filter with a multimode filter to create new textures and harmonics.

Supplier's Notes:
The Grainity brings a unique and never-heard-before concept to the world of analogue VCF.

While being based on analogue filtering only, the Grainity expands and enriches the sound in creating subharmonics, harmonies, unison, flanging effects and formant filtering all at once.

The module presents two sections, the granular filter itself and a typical multimode filter, each with its own output.

A third output offers a mix of both filter paths. Numerous controls and CV allow a very wide palette of results.

What is the Grainity

Granular?

The word granular was chosen for this filter module in relation to the concept invented by the composer Yannis Xenakis, and which is described as assembling small chops of sounds - he called grains - according to a pattern.

This is exactly what the Grainity does, no more no less ... but, digital control allows doing it in ways that are decades away from what tape and scissors allowed at the time.

Technology wise ...

In the granular section, the incoming sound cycle is determined in order to step through various filtering and phase variations of itself according to predefined patterns called structures.

The controls allow alterations to the cycling phase, cycling frequency offset (tuning), structure selection and frequency division of the filters cycling. This comes in addition to the usual filter frequency and resonance controls.

What the Grainity is not

Technology wise ...

Despite relying on a microprocessor, the Grainity is not a digital audio processor. At any time, the sound remains in the analog domain and goes through analog circuits from in to out.
The digital processor does not convert or generate audio signals; it is there to control the analog circuitry and manage the interface and display.

Sound wise ...

Several digital modules offering granular processing rely on the layering of sound grains, which leads to blurry and cloudy textures.
Layering of the grains is a late addition to the concept of granular synthesis and is not a mandatory feature of the concept.
The Grainity does not use delay lines or sampling memory but is nevertheless true to the foundations of the granular synthesis concept.

The granular VCF in the Grainity is unconventional in that, most of times, it is not filtering the sound in the common expectation of removing something. Typically, the granular process adds more than it removes by expanding both the lower range, creating subharmonics, and the upper harmonic contents in multiples ways.

Dimensions
10 HP
21 mm deep

Current Draw
101 mA +12V
59 mA -12V

Notes: A true legend of modular synthesis, Make Noise's Maths is arguably the definitive Eurorack function generator. Based on analogue computing circuits, Maths draws on Buchla-style techniques to offer countless ways of generating and processing modulation signals.

Supplier's Notes:
The MATHS music synthesizer module is an analogue computer designed for musical purposes. Amongst other things, it will allow you to:

Features

Generate a variety of linear, logarithmic, or exponential triggered or continuous functions

Integrate an incoming signal

With no signal applied, generate a variety of linear, logarithmic, or exponential functions

Add, subtract and OR up to 4 signals

Generate analogue signals from digital information (Gate / Clock)

Generate digital information (Gate / Clock) from analog signals

Delay digital (Gate / Clock) information

If the above list reads like science rather than music, here is the translation:

Voltage Controlled Envelope or LFO as slow as 25 minutes and as fast as 1khz

Apply Lag, Slew or Portamento to control voltages

Change the depth of modulation and modulate backwards!

Combine up to 4 control signals to create more complex modulations

Musical Events such as Ramping up or Down in Tempo, on command

Initiating Musical events upon sensing motion in the system

Musical note division and / or Flam

Perfect for modulating the DPO and just about anything else

Specifications
Width: 20hp
Max Depth
(incl. power cable): 32mm

Power:
60mA@ +12V
50mA @ -12V

Notes: 48-ohm version of the DT700 Pro X, part of Beyer's iconic DT series of studio headphones. Closed back design for mixing and monitoring, with a revealing, analytical sound.

Supplier's Notes:
Your studio headphones

DT 700 Pro X

Trusted sound meets performance and flexibility

In launching the closed-back DT 700 PRO X, Beyerdynamic are unveiling circumaural studio headphones, which are set to usher in a era for the long-established, Heilbronn-based company. While the classics of the PRO X series are regarded as reference products in professional studios all over the world, the PRO line is suitable for flexible use both in the studio and while on the move. It is all made possible by the STELLAR.45 driver that loudly reproduces the best sound in studio quality without any distortion - with all playback devices.

Professional audio quality

Trusted studio sound meets high performance

The STELLAR.45 sound transducer, developed and produced in Heilbronn, Germany, delivers that proven Beyerdynamic sound at previously unattained levels of studio-headphones-class performance. This is down to the neodymium ring magnet as well as copper-clad high-tech wire. The trade-off between electrical conductivity and the weight of the wire is unique. In combination with the developed three-layer speaker diaphragm featuring integrated damping layer, this has created a highly efficient driver system that performs superbly on all playback devices.

The innovative membrane structure controls the axial motion of the voice coil and ensures that it remains securely positioned in the magnet gap even during high oscillations. Another benefit is vast and natural frequency response. The fast response of the transducer and the detailed transient response, produced by the low coil weight, create a sound that is always reliable and distortion free even at high sound pressure levels.

Flexibility

Wide range of applications on all playback devices

Anytime, anywhere - the wide range of applications offered by the PRO X line unleashes your creativity. Be it on an audio interface, laptop, tablet or mobile phone: Thanks to Beyerdynamic's high-performance STELLAR.45 driver, the PRO X headphones with an impedance of 48 ohms reproduce sound at volume and power to familiar levels of studio quality - on all playback devices. The cable concept is also demonstrably suitable for everyday use: the removable mini-XLR cable can be swapped out as required to be replaced with cables that have different lengths or feature other connectivity options.

Superb wearing comfort

Tailored fit for extra-long sessions

The PRO X line also embodies what these professional headphones have always been synonymous with: maximum wearing comfort. The robust spring steel headband design assures the over-ear headphones provide a secure fit and ensures durability. The supple velour ear pads are soft to the touch, as you would expect, and guarantee superior ventilation. The headband ergonomically adapts to the shape of the wearer's head with the aid of soft memory foam and, like the ear pads, can be replaced if required.

Design & materials

Built to last, featuring a sleek, robust design

Black, minimalist and reduced to the essentials. In a word: PRO. As far as the design of and materials used in the PRO X line are concerned, attention was paid to the resilience of all components: metal headband, GRP components, a robust mini-XLR connector and hard-wearing cable. This means you are geared up on a daily basis for any professional application.

Sustainability

Sustainable headphones - made in Germany

The PRO X line headphones have been designed for daily use in challenging conditions. This is why they are handmade in Germany using premium quality materials. If required, nearly all the headphones' components can be replaced, turning these headphones into an investment that makes sense for every creator.

Technical data

Transmission type: Wired
Earpad material: Velours
Nominal impedance headphones: 48 ohms
Weight headphones without cable: 350 g
Headphone frequency response: 5 - 40,000 Hz
Nominal sound pressure level: 100 dB SPL (1mW/500Hz)
Sound coupling to the ear: Circumaural (around the ear)
Cable & plug: 3 m or 1.8 m straight cable, detachable, with 3-pin mini XLR & stereo jack (3.5 mm & 6.35 adapter)

Notes: HI POWER is Crazy Tube Circuits' next endeavour in pedal + amp-in-a-box overdrives recreating legendary sounds, following the success of Crossfire and Unobtanium.

It was inspired by the sonic combination of two British tone machines. The almighty Colorsound Power Boost meets the blistering high-headroom Hiwatt amp.

While the combination of these two units directly hints at the gear setup of David Gilmour and especially the gear used on Pink Floyd's album: Wish You Were Here (think the guitar solo sounds of "Shine on you Crazy Diamond", "Have A Cigar") the sonic options are endless.

The orange enclosure silicon transistor circuit (Colorsound Power Boost) can deliver from a transparent clean boost to an all-out fuzz driving a tube amp to sonic bliss. Crazy Tube Circuits set out to clone the original unit featuring the true-to-the-original spec BC184 transistors running on 18V DC (via an internal voltage booster circuit).

The ultra-flexible 2-band Baxandall EQ circuit can add bite and low-end rumble to any setup. Crazy Tube Circuits used a reverse log gain pot (labelled as volume), compared to the linear taper pot found in the original units and acted as an on/off switch, to be able to set the amount of boost/overdrive more precisely. While the earlier units didn't feature a master volume control (only as an aftermarket mod - Pete Cornish made an external unit master volume for David Gilmour's Power Boost) Crazy Tube Circuits chose to include one that is setup in a way so that when it is all the way clockwise it is bypassed. Later versions of the Power Boost had 9V power supply and were renamed as the "Overdriver" due to the lower headroom and their ability to drive the signal earlier. They were offered in a grey enclosure and can be seen in the gear setups of Jeff Beck, Marc Bolan, etc. Crazy Tube Circuits chose to incorporate this version as well with a flip of a toggle switch (PWR-ODR toggle switch).

On the left side of the HI POWER you will find an all-analogue circuit set out to emulate the sound and feel of a Hiwatt amp. Following the path of the famed British tube amplifier, this circuit offers authentic amp tone and feel resembling guitar tones from guitar greats like David Gilmour, Pete Townsend, Jimmy Page, Noel Gallagher to name a few. From the big bold high-headroom clean sounds to the face-melting crunchy tones.

True to the last detail, Crazy Tube Circuits have included the full EQ section along with a presence control located at the negative feedback of the power amp simulation circuit. A headroom toggle switch selects between the high headroom 100w power section provided by a quartet of EL34s (think Hiwat DR103), or the lower headroom and compression provided by a 50W power section with a pair of EL34s when hit hard (think DR504). Similar in operation to the original amps the master volume was designed to produce more gain at higher settings.

Crazy Tube Circuits taken the design a step further by adding a switch to select between input channels of the amplifier. You can select between the full response of the normal channel of the amplifier, the increased presence and tight low end of the bright channel input or the "Gilmour-ish" enhanced frequency response and added gain of those inputs linked together. This follows the modifications that Pete Cornish did to all David Gilmour's Hiwatt amps.

Like their other dual overdrive/amp-in-a-box designs, Crazy Tube Circuits also included a passive effects loop to give you the option to connect your beloved pedals between your booster/overdrive and amp in a box or use the two sections as separate and independent effects when using an external bypass switcher/looper. Gilmour enthusiasts will love to insert their Big Muff, Tube Driver and Phase 90 in there. Note that all pedals inserted in the passive effects loop are still in the signal chain when any or both sections of HI POWER are in bypass.

HI POWER features a power-up bypass/engage pre-set function for the footswitches. That way you can select which state your pedal will go to when you plug the power supply. This function comes in especially handy to people that use remote pedal switchers / loopers as they only set the state of the pedal once and then operate from the controller.

All-analog dual booster/overdrive - amp in a box.
Recreates the tones of the legendary setup used by David Gilmour in the recordings of Pink Floyd's Wish You Were Here album.
Right side: Faithful reproduction of the Colorsound Power Boost/Overdriver circuits with true-to-the-original-spec BC184 transistors.
Controls: gain, bass, treble, master, voicing toggle.
Wide gain range control: from transparent boost to gnarly and fuzzy overdrive.
Two-band (treble & bass) Baxandall EQ.
Master knob sets overall output. Huge amount of dB boost available.
Toggle switch to select between the 18V Power Boost style circuit or the 9V Overdriver style circuit.
Left side: Hiwatt AMP in a box overdrive.
All analog simulation of the preamp and power amp sound and response.
Controls: gain, bass, middle, treble, master, input channel toggle switch, headroom toggle switch.
Gain control: from clean to big bold British crunch/overdrive.
3-band Hiwatt style EQ (bass, middle, treble).
Presence control follows the original design/is located at the negative feedback of the power amp simulation circuit to control the amount of upper mid and high frequencies.
Master knob sets overall output volume. Designed to respond like the original control producing more gain at higher settings.
Input channel toggle switch selects between normal, bright, or linked input channels of the AMP for different voicing and gain levels.
Headroom toggle switch selects between the high headroom and dynamic response of a 100W amp or the lower headroom and compression of a 50W power amp.
Independent operation of the BOOST/OVERDRIVE and AMP sections
Click-less true bypass design via high-quality relays for each section.
2 Footswitches / 2 Status LEDs - one for each effect section.
Power-up bypass/engage preset function for the footswitches.
Top-mounted jacks
Passive series effects loop to connect pedals between the two sections or use them separately as independent effects.
Power Supply: Use only 9V DC, 2.1 mm x 5.5 mm, center negative (not included).
Runs internally at 18V DC (via voltage doubler circuit) for higher headroom and tube-like performance.
Current consumption: 84mA.
British Racing Green die-cast enclosure with color-coded lettering for the control section (orange for BOOST/OVERDRIVE section, white for AMP section).
Dimensions: (W x L x H): 119 x 97 x 53 mm.
Weight: 444 g.
Made in Greece.

Notes: The Erica Synths Black Stereo Delay is a hi-fi stereo delay with a lot of unique features based on our custom DSP engine. Tape, BBD and digital delay emulations with three modes, each accompanied with delay time, feedback, feedback tone and stereo spread controls allow for designing extremely delicate effects. CV control over various parameters and the ability to save up to 10 presets will make this module an integral part of any performance rack. Delay effects are developed by Dutch company www.112db.com

Features

Tape, BBD and digital delay types
Three modes for each type
Tap and clock synchronization of delay time
10 preset patches
CV control over delay time, feedback, tone, dry/wet mix and preset selection
Adjustable stereo delay spread
The modules run on new Erica Synths DSP hardware and the effects are developed in collaboration with Dutch company 112.dB who make some of the most beautiful sounding effects.

Erica Black Series include high-end, unique functionality and superior quality modules. Only the best, highest-quality components are used, all inputs and outputs are protected against undesired overvoltage. Erica Black Series consist of range of modules that are needed to put together entire synth.

Technical specifications:

Max audio input level before clipping: 16Vptp
CV input range (full span): -5V - +5V
Sampling frequency: 48kHz, 24bit
Delay time: 3..3000ms
Audio codecs: -108 dynamic range, -98dB THD+N
Power consumption: 120mA@+12V, 39mA@-12V
Module width: 12HP
Module depth: 35mm

Notes: The Erica Synths Black Reverb is a versatile hi-fi stereo FX module with lots of unique features based on Erica Synths' custom DSP engine. The reverb sources are selectable Tape, BBD and "dirty BBD" digital; emulations with three modes, each - Room, Hall and Cathedral. Delicate room size control, feedback, feedback tone and stereo spin controls allow for designing extremely delicate reverberation effects. CV control over various parameters and the ability to save up to 10 presets will make this module an integral part of any performance rack.

Features:

Reverb based on Tape, BBD and digital delay lines
Three room sizes
Manual and triggered FREEZE with 1V/oct tracking
10 preset patches
CV control over size, feedback, tone, dry/wet mix and preset selection
Adjustable stereo spin

Specs:

Max audio input level before clipping 16Vptp
CV input range (full span) -5V - +5V
Sampling frequency 48kHz, 24bit
Audio codecs -108 dynamic range, -98dB THD+N
Power consumption 120mA@+12V, 39mA@-12V
Module width 12HP
Module depth 35mm

Notes: A Juno-inspired oscillator module? We're flattered, but credit has to go to Roland for this one. Based on the Juno-106's digitally-controlled analogue oscillators, the Castor & Pollux modernises the 80s design with a built-in LFO and hard sync.

Supplier's Notes:
Twins that dance in and out of phase, never completely together but never fully apart, bound to each other in the infinite universe.

Castor & Pollux is a dual oscillator that echoes back to the legendary Roland Juno but shines with its own unique, massive voice. It contains two digitally-controlled analogue oscillators implemented using a faithfully modernized version of the original Juno 106 design. It builds on the classic '80s sounds of its inspiration by using the second oscillator and internal LFO to layer in thick detuned sounds and harmonically complex hard synced waveforms.

Castor & Pollux II brings a redesigned interface and moves individual waveform outputs to an included expansion. Both versions have the same features and use the same firmware.

14 HP
+12 V @ 100 mA, -12 V @ 35 mA
25 mm deep
2 separate oscillators
7 octave range
9 total outputs with waveform outputs and onboard mixers
Pitch CV input jacks (0 V to 6 V) and pitch knobs (-1 to +1 octave, configurable)
Pulse width CV input jacks and knobs
Hard sync
Hardware chorusing
Internal low-frequency oscillator (LFO)

Notes: This is a digital effects pedal in a compact format, including reverse delay - pitch shifter - delay and modulated reverb.

Effects engine is 12 bit and includes analogue filtering before and after digital conversion, based on vintage eighties units' topologies, but it allows for all the effects to be simultaneously available.

Despite its complexity, operation is simple and intuitive, all functions are directly controlled by the corresponding knob.

Pots controls:

1-Blend controls mix of effects over final output signal
2-Octave blend mix a pitched signal to the input of the reverb
3-Octave -1 +1 controls tuning of pitch component
4-Repeat controls feedback of delay component 5-Balance controls mixture from reverb and
delay.
6-Sample rate controls the frequency operation for the whole pedal, modifying delay time
and reverb decay.
7-Reverse blends the reverse component with the direct signal.

Indicators:

Signal: indicates clipping, the input path has compression and limiting so it gives an idea of how hard you are driving the pedal.

Tap: blinks at the rate of the delay, depending on tap and sample rate.

Tap/freeze: turns red while tapping time, blue indicates reverb freeze.

Bypass: global effect on/off

Footswitches:

1-Tap/ freeze works as a tap tempo for the delay and reverse delay, and freeze/infinite for reverb, selected by the associated toggle switch. Max delay time is around 6 seconds, depending on sample rate setting.

2-Bypass: buffered bypass for the whole pedal.

Power consumption: 150 milliamps.

Notes: Your studio headphones

DT 900 Pro X

Trusted sound meets performance and flexibility

In launching the open-back DT 900 PRO X, Beyerdynamic are unveiling circumaural studio headphones, which are set to usher in a era for the long-established, Heilbronn-based company. While the classics of the PRO series are regarded as reference products in professional studios all over the world, the PRO line is suitable for flexible use both in the studio and while on the move. It is all made possible by the STELLAR.45 driver that loudly reproduces the best sound in studio quality without any distortion - with all playback devices.

Professional audio quality

Trusted studio sound meets high performance

The STELLAR.45 sound transducer, developed and produced in Heilbronn, Germany, delivers that proven Beyerdynamic sound at previously unattained levels of studio-headphones-class performance. This is down to the neodymium ring magnet as well as copper-clad high-tech wire. The trade-off between electrical conductivity and the weight of the wire is unique. In combination with the three-layer speaker diaphragm featuring integrated damping layer, this has created a highly efficient driver system that performs superbly on all playback devices.

The innovative membrane structure controls the axial motion of the voice coil and ensures that it remains securely positioned in the magnet gap even during high oscillations. Another benefit is vast and natural frequency response. The fast response of the transducer and the detailed transient response, produced by the low coil weight, create a sound that is always reliable and distortion free even at high sound pressure levels.

Flexibility

Wide range of applications on all playback devices



Anytime, anywhere - the wide range of applications offered by the PRO X line unleashes your creativity. Be it on an audio interface, laptop, tablet or mobile phone: Thanks to the high-performance STELLAR.45 driver, the PRO X headphones with an impedance of 48 ohms reproduce sound at volume and power to familiar levels of studio quality - on all playback devices. The cable concept is also demonstrably suitable for everyday use: the removable mini-XLR cable can be swapped out as required to be replaced with cables that have different lengths or feature other connectivity options.

Superb wearing comfort

Tailored fit for extra-long sessions

The PRO X line also embodies what these professional headphones have always been synonymous with: maximum wearing comfort. The robust spring steel headband design assures the over-ear headphones provide a secure fit and ensures durability. The supple velour ear pads are soft to the touch, as you would expect, and guarantee superior ventilation. The headband ergonomically adapts to the shape of the wearer's head with the aid of soft memory foam and, like the ear pads, can be replaced if required.

Design & materials

Built to last, featuring a sleek, robust design

Black, minimalist and reduced to the essentials. In a word: PRO.

As far as the design of and materials used in the PRO X line are concerned, attention was paid to the resilience of all components: metal headband, GRP components, a robust mini-XLR connector and hard-wearing cable. This means you are geared up on a daily basis for any professional application.

Sustainability

Sustainable headphones - made in Germany

The PRO X line headphones have been designed for daily use in challenging conditions. This is why they are handmade in Germany using premium quality materials. If required, nearly all the headphones' components can be replaced, turning these headphones into an investment that makes sense for every creator.

Technical data

Transmission type: Wired
Earpad material: Velours
Nominal impedance headphones: 48 ohms
Weight headphones without cable: 345 g
Headphone frequency response: 5 - 40,000 Hz
Nominal sound pressure level: 100 dB SPL (1mW/500Hz)
Sound coupling to the ear: Circumaural (around the ear)
Cable & plug: 3 m or 1.8 m straight cable, detachable, with 3-pin mini XLR & stereo jack (3.5 mm & 6.35 adapter)

Notes: Based on the legendary Roland Space Echo, the RE-202 brings tape-style delay effects into the future. Classic vintage sound in a modern, user-friendly package.

Supplier's Notes:
A Masterpiece Returns in the Modern Era

Introduced in 1974, the Roland RE-201 Space Echo stands among the most legendary and sought-after effect units ever produced. This tape-based classic remained in production for over 14 straight years, and its distinctive rhythmic echo sounds, warm character, and highly playable sonic quirks still inspire musicians, producers, and audio mixers over four decades on.

Backed by intensive R&D and Boss' latest innovations, the RE-202 faithfully delivers the authentic sound and behaviour of the Space Echo like never before. Built by the company that designed the original, this advanced pedal captures the RE-201's magic in flawless detail, from the magnetic tape and motor properties to the vibrant spring reverb and colourful preamp circuit. And to take things even further, Boss have expanded the vintage Space Echo experience with lots of new features tuned for today's music.

Tape Echo Magic

Tape echo was the first delay effect and one of the first effect processors available for electronic musicians. In contrast with today's CPU-based digital units, a tape echo is a simple machine that uses a motor to pull magnetic tape across one or more record/playback heads. Warm, full, and dynamic, the tape echo sound is influenced by many factors. The ever-changing input level colours the sound with varying amounts of tape saturation and compression. In addition, motor speed fluctuations, friction, wow and flutter, and other elements introduce an appealing modulated character that's subtle and continually evolving.

RE-201 Space Echo: Simply Legendary

The RE-201 was a benchmark Roland product and one of the leading tape echo units of its era. It featured three evenly spaced heads that produced a wider range of echo effects than typical single-head designs, plus an innovative free-running tape system that provided superior performance with minimal tape wear. Grab-and-go controls enabled quick access to clean, single delays or various head combinations for dense, rhythmic echoes. A spring reverb tank was included too, making the RE-201 a one-stop shop for quality ambience effects. Last but not least, analogue preamp circuitry was another key ingredient in the Space Echo's rich sonic recipe.

A Masterpiece Reborn

Realized through the latest technologies and exhaustive analysis of several vintage RE-201s-including a pristine original unit from the BOSS and Roland factory archive-the RE-202 brings the complete Space Echo experience to life in a versatile modern pedal.

While previous BOSS designs captured the true sonic flavour and essential characteristics of the Space Echo, new advancements have allowed us to go much deeper than ever before. With the RE-202, Boss' engineers have fully reproduced all the complex, non-linear behaviours that contribute to the RE-201's immortal character. Everything that influences the sound was carefully examined and recreated with all-new algorithms, including the tape path, record/playback mechanism, motor variations, preamp coloration, tape age, spring reverb character, and more.

Retro Sound at Your Fingertips

The RE-202 delivers the full vintage vibe of the RE-201-without the need for regular tape replacement and hardware maintenance. All the core controls of the original are here, including the iconic 12-position mode selector. Every behaviour is replicated with complete accuracy, such as the gradual pitch change that occurs when the Repeat Rate knob is tweaked, or the cool runaway feedback that happens when the Intensity knob is maxed.

With selectable tape age and variable controls, you can dial in everything from a brand-new Space Echo to the worn character and quirks of a well-loved vintage piece. The Saturation control has been carefully calibrated based on the actual magnetic tape and preamp behaviours of the RE-201, with the sound becoming warmer and more compressed as you turn up the knob.

Sampling Frequency: 48 kHz

AD Conversion: 24 bits + AF method
AF method (Adaptive Focus method) This is a proprietary method from Roland & BOSS that vastly improves the signal-to-noise (SN) ratio of the AD converter.

DA Conversion: 32 bits
Processing: 32-bit floating point
Modes: 12 modes
Memory127 + Manual
Nominal Input Level: INPUT A/MONO, INPUT B: -10 dBu
Maximum Input Level: INPUT A/MONO, INPUT B: +7 dBu
Input Impedance: INPUT A/MONO, INPUT B: 1 M ohm
Nominal Output Level: OUTPUT A/MONO, OUTPUT B: -10 dBu
Maximum Output Level: OUTPUT A/MONO, OUTPUT B: +7 dBu
Output Impedance: OUTPUT A/MONO, OUTPUT B: 1 k ohm
Recommended Load Impedance: OUTPUT A/MONO, OUTPUT B: 10 k ohms or greater
Bypass: Buffered bypass
Controls: ON/OFF switch, MEMORY switch, TAP switch, SATURATION knob, WOW & FLUTTER knob, MODE SELECTOR knob, BASS knob, TREBLE knob, REVERB VOL knob, REPEAT RATE knob, INTENSITY knob, ECHO VOL knob, MEMORY button, INPUT button, TAPE button

Connectors: INPUT A/MONO jack, INTPUT B jack, OUTPUT A/MONO jack, OUTPUT B jack: 1/4-inch phone type
CTL 1, 2/EXP jack: 1/4-inch TRS phone type
MIDI (IN, OUT) jacks: Stereo miniature phone type
DC IN jack
USB port: USB micro B-type (program update only)
Power Supply: AC adapter
Current Draw: 140 mA
Accessories: AC adapter, Owner's Manual, Leaflet ("USING THE UNIT SAFELY," "IMPORTANT NOTES," and "Information"), Rubber foot

Options (sold separately)
Footswitch: FS-5U
Dual footswitch: FS-6, FS-7
Expression pedal: FV-500H, FV-500L, EV-30, Roland EV-5
MIDI/TRS connecting cable: BMIDI-5-35, BMIDI-1-35, BMIDI-2-35, BCC-1-3535, BCC-2-3535

Size & weight

Width: 192 mm / 7-9/16 inches
Depth: 133 mm / 5-15/64 inches
Height: 52 mm / 2-3/64 inches
Height (including rubber foot): 53 mm / 2-3/32 inches
Weight: 860 g / 1 lb 15 oz

Notes: Inspired by the vintage Bell and Howell 385 Filmosound projector that guitarists have modified and used as guitar amps, Walrus has created a dynamic and responsive overdrive modeled after the projector's tone.

The 385 was developed to have the same simple but effective tone control as it's older relative, but unlike the projector, the 385 breaks up the single tone control and integrates separate, boost and cut bass and treble, allowing the player to get more creative with mid-frequency scoops and bumps allowing for a much wider array of tones to be achieved.

The pedal is internally running at 18v, which helps us nail the same dynamic feel of the amp in a stomp box.

This means it is extremely sensitive to how hard you dig in - just like the amp.

Updated for 2023.

Controls:

Bypass: Soft touch, relay true-bypass. Press the switch to engage/disengage the pedal. LED indicates whether the circuit is engaged or not.
A/B: Soft touch switch. Press to swap between using either A (White) or B (Red) Volume and Gain controls. LED indicates which controls are being used - White for A, Red for B.
Volume A: Controls the overall volume in the A setting. Turn clockwise for more volume, counter-clockwise for less volume.
Gain A: Controls the overall gain in the A setting. Turn clockwise for more gain, counterclockwise for less gain.
Volume B: Controls the overall volume in the B setting. Turn clockwise for more volume, counter-clockwise for less volume.
Gain B: Controls the overall gain in the B setting. Turn clockwise for more gain, counterclockwise for less gain.
Treble: Used to adjust the level of the treble frequencies. Turn clockwise to increase the level of the treble frequencies. Turn counter-clockwise to reduce the level of the treble frequencies.
Bass: Used to adjust the level of the bass frequencies. Turn clockwise to increase the level of the bass frequencies. Turn counter-clockwise to reduce the level of the bass frequencies.
385+ Switch: When the switch is down, you are able to achieve classic 385 sounds. Flip the switch up to add an additional gain stage to the input of the pedal, achieving heavier gain sounds and driving the pedal harder.

Specifications

The 385 comes in a matte black finish with yellow and red ink featuring original artwork of a vintage Belle and Howell 385 projector by David Huttner ready to give you the dynamic tone you've been searching for.
The die cast enclosure's exact size is 12.1 x 6.6 x 3.5 cm
Power requirements are 9VDC (100mA minimum). The use of an isolated power supply is recommended for powering all Walrus Audio Pedals.
Daisy chain power supplies are not recommended. Power supply not included.
Input: 1/4" TS, Unbalanced, 1M impedance
Output: 1/4" TS, Unbalanced, 10k impedance
True Bypass

Notes: The Wave Transformer is a complex single oscillator with 7 audio outputs. Its method of wave shaping differs from other complex oscillators in that it is not based upon classic wave folding such as is common in West Coast synthesis, or filtration such as is common in East Coast synthesis.

This analogue, vintage-voiced, voltage-controlled oscillator features over 8 octaves of accurate pitch tracking. Its 7 simultaneous wave outputs include a unique Complex output. This strange and novel output varies between a simple waveform (triangle, unless you patch a signal into the Shape Insert jack) and a complex transformation of the harmonic structure of the original waveform. It contains a unique mixture of the fundamental frequency, odd order harmonics, even order harmonics and subharmonics. The Sub Octave panel control will determine whether the sub harmonics are derived from one octave down, two octaves down, or are muted altogether. It will vary from a simple waveform to a silhouette of your cat watching you as you react to a "present" that it left for you on the counter. No, seriously.

The module's Transform control morphs from a basic waveform through many strange iterations into a complex, gnarled mass of audio mutations at the Complex output using an asymmetrical multi differential audio transmutation circuit. You can yield countless variations on these permutations by combining this novel circuit with Hard Sync, Soft Sync, Linear FM and Exponential FM.

Additionally, you can mute the source waveform to use the circuit as a harmonic gate/VCA, rendering the Wave Transformer a voice unto itself.

If that is not enough, there is a Shape Insert that allows you to transform external oscillations and modular-level audio sources.

Notes: Analogue Ring Modulation Pedal With LFO, MOD, Frequency & RATE Controls.

Reviving An Avant-Garde Pedal For Music's Trailblazers

From light Lo-Fi modulation all the way to the piercing sound of infinity ring-modulation, the Warm Audio RingerBringer accurately recreates the ultimate all-analogue ring modulation effect used for experimental tones. Like the original, loved by artists like Jeff Beck, Radiohead, Omar Rodriguez-Lopez, Trent Reznor, and many more, RingerBringer delivers the original distinct set of controls, extensive in/out options, and rich sonic textures to inspire boundless sonic experimentation.

Don't Just Play, Create

The ideal platform for the sonic tinkerer, RingerBringer inspires you to generate layered frequencies and harmonics, explore a wide range of sonic possibilities for guitar & beyond, and design your own sounds from the ground up. Extensive controls including LFO, MOD, Frequency & RATE open up sonic possibilities that range from subtle overdriven textures all the way to wobbling, warped leads soaked in texture and tone. RingerBringer is 100% analogue and sports premium components including hand-selected op-amps and transistors. RingerBringer is no emulation or "patch", instead it delivers true-to-spec performance of the boutique, analogue original.

For Original Artists Building Memorable Sounds

Delivering tones ranging from nuanced drive to out-of-this world modulation, RingerBringer helps develop a unique sonic signature for any instrument, on any track.

A Sandbox For Synths & Keys:

Send any keyboard or synth through the WA-RB for added harmonic content and endless modulation. Try sending digital synths, keys, and pads from your interface through the WA-RB for added analogue vibe and "fattened up" tone on otherwise dry digital signals.

Technical Specifications

100% Analogue Ring Modulation Pedal With LFO, MOD, Frequency & RATE Controls
Accurate Recreation Of The Ultimate Ring Modulator For Experimental Tones
Premium Components Including LM13700M & TL072ACDR Op-Amps + Hand-Selected Transistors (DMMT3906W & MMBT3904) For True-To-Spec Performance
LFO Controls: Amount, Rate, & Sine/Square Wave Switch
Modulation Controls: Mix, Frequency, & Lo/Hi Switch
Universal Drive Control + LED Indicators For Level, LFO, & Bypass
CV Inputs: Rate | Amount | Mix | Frequency
1/4" Input Jacks: Audio In | Audio Out | LFO Out | Carrier IN/Out
Output Impedance: 600 Ohms | Buffered Bypass
9-Volt Battery Or /External 9V Regulated (Centre-Negative) DC Adapter
Nominal Current Draw: 100 mA (9V)
Custom Black Panel Enclosure With Retro Faux-Wood Sides
Dimensions: 6.5" x 5.25" x 3" | Product Weight: 1.90 lbs

Notes: DP-2000 is a digital percussion pad with 8 touch sensitive zones and a huge library of internal sounds.

A USB-to-PC/Mac interface enables integration with a software recording suite as a trigger controller and sound source. Sounds from the flagship DM-8 kit are stored internally, along with additional world percussion instrument samples and the option to add user samples from a USB flash drive. Sounds are assignable to pads and adjusted using the intuitive user interface and control surface, and each pad has a dynamic indicator which varies in brightness to mirror the playing dynamics. Dedicated MIDI in and out connections mean that the DP-2000 can expand a live playing setup or operate from hardware sequencers and other MIDI controllers. In addition to tuning and dynamics control, dual-engine DSP effects can be applied to each sound and tailored to suit each sound. If performance space is very limited, inputs for a hi-hat pedal, kick pad and an additional trigger can turn the DP-2000 into a fully playable super-compact e-drum kit. Add the possibility of music playback from USB flash drive and comprehensive input and output options, the DP-2000 is as much at home as a standalone instrument or as an expansion to an existing drum or percussion kit.

Add hi-hat & kick triggers for a full e-drum kit
USB-C Bluetooth adaptor
USB interface to PC/Mac
Importable WAV files for custom sounds
Power supply: 9Vdc, 500mA (tip-negative) adaptor supplied
Inputs: Aux input, trigger, hi-hat, kick, MIDI 5-pin DIN, USB-C (U-Disk)
Outputs: Headphones (3.5mm), L+R output (6.3mm), MIDI, USB-B (PC/Mac)
Dimensions: 408 x 314 x 62mm
Weight: 2.8kg

In the box

The box for this item contains:

DP-2000 digital percussion pad
DC power adaptor
USB-C Bluetooth adapter

Notes: Another update for WMD's clever dual VCA, this time a little bigger to give more control. Digital control of CV and attenuation gives lots of creative options. Third time's a charm.

Supplier's Notes:
WMD have done several designs of this circuit over the years, the first one had no knobs, the second was too small, the MKIII is finally how this circuit should be packaged. This module does some really cool stuff and is super useful in any system.

The Digital VCA lets signal through like a normal VCA, but the CV and attenuation level is controlled digitally. This lets us do things like wait until there is a zero crossing to change the amplitude, resulting in clickless amplitude changes.

The Trigger mode causes the VCA to only update when a trigger is received. The addition of a noise circuit for each side let us do a very quick and easy sample and hold that never droops. With no input, 5V is normaled to the attenuator, so you get a 0-5V sample and hold. In Bipolar mode, you can get -5 to +5V.

Both sides have bipolar VCA mode (polarizer), which lets them invert the signal when negative CV comes in. Also known as ring modulation. With the zero crossing detector, this can produce some super wild wave shapes.

Features

Dual VCA Design
Unipolar or Bipolar Operation
DC Coupled Analogue Signal Path
Low Distortion / Low Noise
VCA Closes Completely
Zero Crossing Detector Mode
Trigger Mode
Two Independent Noise Sources
8 bit CV resolution
Great for Fast Envelopes and Sine Bass Sounds

Specifications

Power: +65mA, -45mA
Width: 8HP
Depth: 35mm with cables
Height: Eurorack 3U (128.5mm)
Board Height Behind Panel: 112mm
CV/Signal Input Impedance: 100k
Output Impedance: 1k
UPD in 3.3V Threshold Schmitt Trigger
ZCD produces 15us 5V pulse
5V CV to fully open VCA
Linear VCA response
20Vpp signal handling

Notes: Simple, straightforward and effective. The XVI-M offers 16 high-resolution faders, 16 programmable buttons and MIDI output over USB or TRS. Solidly built metal enclosure promises durability.

Supplier's Notes:
XVI-M MIDI Controller, 16 Faders, 16 programmable buttons, 14bit resolution

XVI-M Desktop is a 16 channel desktop MIDI control surface.

Features:

Long throw LED 60mm faders
USB MIDI, MIDI TRS#1 and MIDI TRS#2 outputs
USB Powered (USB C, Cable included). Stand alone adapter available but NOT included
14bit (MIDI Pitchbend) resolution faders. Can be set to any 7 bit CC or NRPN/RPN
Online parameter editor: https://misw.us/editor
Fader output can be routed to USB MIDI, TRS MIDI A or TRS B
3 color programmable button can be momentary, 1 state toggle, 2 state toggle, or 3 state toggle with each state sending a MIDI msg
Durable metal case
Includes:

XVI-M Control Surface
USB C to USB A cable (2m)
1.5m TRS A to MIDI DIN cable

Notes: Unearth the Walrus Audio Silt Harmonic Fuzz, a collaborative creation with tube expert Jim Hagerman.

Wielding an internal pre-amp tube, the Silt is a two-in-one fuzz that creates massively rich fuzz tones perfect for chords and rhythmic parts or with the press of a switch, adds uniquely harmonic overtones to the signal before hitting the tube. Crafted specifically for those seeking a harmonically rich fuzz experience, the Silt boasts an analogue circuit with the distinctive warmth of a 12AU7 tube as its drive section, letting you explore a unique and wild sonic landscape.

Main Features:

1. 12AU7 Tube Drive

The Silt's 12AU7 tube section drives the warm, bone-rattling fuzz. We unearthed this sonic fossil to encase your sound in an amber warmth, while still providing the grit, growl, and harmonically complex textures that only a tube-driven fuzz can provide.

2. Harmonic Mode

Harmonic Mode acts as a frequency doubler before the drive section of the pedal. This produces crispy, octave-like sounds, lending a unique edge to your lead tones. Try this with your guitar tone knob rolled off.

3. Contour Control for Precision Tone Sculpting

Refine your fuzz tones with the precision of the Contour control to achieve a wide spectrum of timbres.

Toggle between highpass, flat, and lowpass curves in the pre-tube EQ stage, like uncovering layers of sonic strata. Especially helpful when switching between different styles of pickups. Whether you're chasing searing leads or wooley rhythm, the Silt adapts to your style with roaring precision.

4. Designed for Operation at 9v-12v for Plenty of Gain

Supercharge your fuzz experience by operating the Silt anywhere between 9v and 12v. Running the pedal at 12v will give you an extra gain boost, letting you push the primal boundaries of fuzz to deliver the searing tones you've been searching for.

5. True Bypass Circuit

Maintain the integrity of your original tone with the relay bypass circuit. When disengaged, the Silt ensures your signal remains pure, allowing your guitar's natural voice to shine through undisturbed.

Controls:

Volume: Control the output volume level of the pedal.
Tone: Sculpt your output tone with a lowpass/highpass tilt tone control.
Gain: Control the input gain into the fuzz circuit, from subtle, distortion-like crunch to full-throttle fuzz.
Contour: Toggle between highpass, flat, and lowpass curves in the pre-tube EQ stage.
Bypass Switch: Enable or disable the effect with the relay bypass switch, preserving your original signal when the Silt is not in use.
Harmonic Switch: Activate or deactivate the frequency doubler circuit before the clipping stages, infusing your sounds with octave-like textures for a unique sonic edge.

Notes: Updated version of the DT-RDX controller features a built-in MIDI merger. The approach is the same, with hands-on control of all Yamaha Reface DX parameters, making it easier than ever to unleash the power of FM synthesis.

Supplier's Notes:
Dtronics DT-RDX-V2 for Yamaha Reface DX

The Dtronics DT-RDX-V2 is a hardware controller for the Yamaha Reface DX and the successor to its older brother the DT-RDX. The difference between the two is that the RDX-V2 has a hardware MIDI merger on board for even better performance.

With all its parameters the FM synthesis is a challenge control.

The DT-RDX has all parameters directly accessible with its 41 knobs and 9 switches.

All you have to do is select the desired operator. You can also edit multiple operators with the same parameters at the same time.

The controller is mounted on a stylish holder.(included)

Specifications

Holder: steel
Casing : high grade plastic
Power splitter cable to power-up the RDX and the Yamaha Reface DX is included
MIDI cable to connect the DT-RDX to the Yamaha Reface DX synthesizer is included.
The pictured Yamaha Reface DX synthesizer is not included

Notes: An ART wavetable dual oscillator mono voice source that can be used to build polyphonic patches and multi voice patches. It generates its harmonically rich sound using two 80s vintage D/A converters to feed your filters and effect processors. VORTEX comes loaded with dozens of wavetables, plus additional user wavetables can be loaded from the front panel SD card. A detune knob controls the second VCO and adds effects from deep phasing to a sub octave. The position knob and CV input selects waves in the tables and vibrato from LFOs to create FM. Like other ART sound generators a dedicated Gate output manages the voice envelope or any modulation synced to that voice. VORTEX is a great companion to the analog ATX1 and a must for digital synthesist enthusiasts.

Size: 8HP - Depth: 40mm / 1.5"
Power: +12V 80mA / -12V 25mA

Notes: A classic all analogue saw VCO core with 3 switchable modes, ART, 1V/Oct, LFO and is recommended as the basic building block for ART systems. It is designed for patching analog polyphonic synths from discrete modules or multi-mono patches in ART mode. When using ART the ATX1 takes care of the tuning including accounting for temperature changes. In 1V/Oct mode the ATX1 runs as a standard old school modular VCO. LFO mode drops the frequency range and is great for patching vibrato to other ATX1s among other things. The ATX1 outputs variable waveshapes with manual or CV control. Classic FM, PWM and hard sync are provided. A dedicated Gate Out in ART mode manages the voice envelopes or any modulation synced to that voice. TipTop consider the ATX1 the best sounding analogue VCO they have ever created.

Size: 8HP - Depth: 40mm / 1.5"

Power: +12V 105mA / -12V 33mA

Notes: Digitally-controlled full-analogue path Granular + Multimode VCF

The Grainity brings a unique and never-heard-before concept to the world of analogue VCF.

While being based on analogue filtering only, the Grainity expands and enriches the sound in creating subharmonics, harmonies, unison, flanging effects and formant filtering all at once.

The module presents two sections, the granular filter itself and a typical multimode filter, each with its own output.

A third output offers a mix of both filter paths. Numerous controls and CV allow a very wide palette of results.

What is the Grainity

Granular?

The word granular was chosen for this filter module in relation to the concept invented by the composer Yannis Xenakis, and which is described as assembling small chops of sounds - he called grains - according to a pattern.

This is exactly what the Grainity does, no more no less ... but, digital control allows doing it in ways that are decades away from what tape and scissors allowed at the time.

Technology wise ...

In the granular section, the incoming sound cycle is determined in order to step through various filtering and phase variations of itself according to predefined patterns called structures.

The controls allow alterations to the cycling phase, cycling frequency offset (tuning), structure selection and frequency division of the filters cycling. This comes in addition to the usual filter frequency and resonance controls.

What the Grainity is not

Technology wise ...

Despite relying on a microprocessor, the Grainity is not a digital audio processor. At any time, the sound remains in the analogue domain and goes through analogue circuits from in to out.

The digital processor does not convert or generate audio signals; it is there to control the analogue circuitry and manage the interface and display.

Sound wise ...

Several digital modules offering granular processing rely on the layering of sound grains, which leads to blurry and cloudy textures.

Layering of the grains is a late addition to the concept of granular synthesis and is not a mandatory feature of the concept.

The Grainity does not use delay lines or sampling memory but is nevertheless true to the foundations of the granular synthesis concept.

The granular VCF in the Grainity is unconventional in that, most of times, it is not filtering the sound in the common expectation of removing something. Typically, the granular process adds more than it removes by expanding both the lower range, creating subharmonics, and the upper harmonic contents in multiples ways.

Dimensions
10 HP
21 mm deep

Current Draw
101 mA +12V
59 mA -12V
0 mA 5V

Notes: Simply sophisticated

With the 200 series, BOSS introduces a new generation of pedals that pack advanced sound and versatility into a streamlined size that saves space on your board. Grab-and-go controls and multi-function switches make operation easy and intuitive, while onboard memories allow you to store multiple setups for instant recall. All 200 series pedals feature premium audio quality with 32-bit internal processing and offer support for external control via footswitches, an expression pedal, or MIDI.

The OD-200 Hybrid Drive brings next-level sound, feel, and flexibility to overdrive and distortion, combining decades of BOSS tone expertise with innovative technologies. Powered by hybrid analogue/digital circuitry, this dream pedal delivers any drive tone you can imagine via 12 primary modes, 15 boost types, series/parallel gain paths, and more. There's even an advanced gate on board, ideal for both eliminating noise and adding tightness to high-gain drive tones.

Version 1.1 Update: User Memory Expansion

The free Version 1.1 software update brings increased flexibility to the BOSS 200 series, greatly expanding the onboard memory capacity for storing and recalling sounds. There are now 128 user setups available. Setups can also be recalled directly via MIDI program change.

For optimal performance, stay up to date with the current OD-200 system software

Premium Drive Tones with BOSS's Advanced Hybrid Design

The OD-200's next-generation hybrid design seamlessly brings analogue and digital clipping circuits together for the best of all worlds, putting a universe of expressive drive colours under your fingers. Twelve modes offer a variety of premium overdrive, fuzz, and distortion sounds, including a high-gain Brown mode derived from the acclaimed Katana amplifier series. And with the three high-performance "X" drive modes powered by BOSS's cutting-edge MDP tech, you'll experience enhanced definition, clarity, and dynamic response that's perfect for modern playing styles.

Powerful Gain Shaping with Series and Parallel Boosts

While each of the OD-200's 12 main drive modes sound fantastic on their own, you're able to craft tones even further with 15 switchable boost circuits. Placing the boost in series lets you create traditional stacked drive voices, complete with post-gain level to balance with the bypassed sound or kick up the volume for solos. The boost circuit can also be used in parallel with the main mode, enabling side-by-side blending for an unlimited range of unique drive textures.

Kill the Noise and Tighten Your Tone

With its integrated gate circuit, the OD-200 always keeps your signal clear and quiet when you're not playing. The default setting is a great starting point, providing gentle, transparent gating that works well for general playing styles. The decay and threshold controls can also be adjusted for super-fast gate performance when needed, perfect for bringing tightness to heavy modern styles that combine full-throttle gain with precision staccato riffing.

Dial in Sounds Fast

The OD-200 offers a ton of advanced capabilities, but remains as simple to use as any regular distortion stomp. With dedicated controls, you can quickly dial in the gain and overall level for any selected mode, then sculpt the tone with wide-ranging low, mid, and high EQ. There's also a multi-function parameter knob, which changes operation based on the group selected with the panel's parameter switch and LED status indicators.

Save and Recall Your Favourite Setups

The OD-200 features 127 user memories plus a real-time panel setting, giving you 128 total setups to choose from. Any range of consecutive memories and the panel setting can be assigned for scrolling access from a footswitch. It's also possible to limit the scrolling range or assign memories directly for even faster recall.

Specifications

Sampling Frequency: 96 kHz
AD/DA Conversion: 32 bits
Processing: 32-bit floating point
Drive Circuit: Analogue + Digital

Modes:
12 modes
OVERDRIVE, BLUES, SCREAM, CNTR OD, X-DRIVE, DIST, X-DIST, STACK DRIVE, FAT DIST, BROWN, X-METAL, FUZZ

Memory: 127 + Manual
Nominal Input Level: INPUT: -10 dBu
Maximum Input Level: INPUT: +7 dBu
Input Impedance: INPUT: 1 M ohm
Nominal Output Level: OUTPUT: -10 dBu
Maximum Output Level: OUTPUT: +7 dBu (Load Impedance: 220 k ohms or greater)
Output Impedance: OUTPUT: 1 k ohms
Recommended Load Impedance: OUTPUT: 10 k ohms or greater
Bypass: Buffered bypass

Controls: ON/OFF switch, MEMORY/BOOST switch
MODE knob, DRIVE knob, LEVEL knob, PARAM knob, LOW knob, MIDDLE knob, HIGH knob
PARAM button, MEMORY button
Display: 7 segments, 3 characters (LED)
Indicator: PARAM indicator, MEMORY (MAN, 1--4) indicators

Connectors:
INPUT jack, OUTPUT jack: 1/4-inch phone type
CTL 1, 2/EXP jack: 1/4-inch TRS phone type
MIDI (IN, OUT) jacks: Stereo miniature phone type
DC IN jack
USB port: USB micro B-type (program update only)

Power Supply: Alkaline battery (AA, LR6) x 3, AC adaptor (sold separately)
Current Draw: 220 mA

Expected Battery Life Under Continuous Use:
Alkaline: Approx. 6 Hours
* These figures will vary depending on the actual conditions of use.

Accessories:

Leaflet "USING THE UNIT SAFELY"
Leaflet "To obtain the Owner's Manual"
Alkaline battery (AA, LR6) x 3
Rubber foot x 4

Options (sold separately):
AC adaptor: PSA-S series
Footswitch: FS-5U
Dual footswitch: FS-6, FS-7
Expression pedal: FV-500H, FV-500L, EV-30, Roland EV-5
MIDI/TRS connecting cable: BMIDI-5-35, BMIDI-1-35, BMIDI-2-35, BCC-1-3535, BCC-2-3535

Size & weight:

Width: 101 mm / 4 inches
Depth: 138 mm / 5-7/16 inches
Height: 63 mm / 2-1/2 inches
Height: (including rubber foot)65 mm / 2-9/16 inches
Weight: 600 g / 1 lb 6 oz
Weight (including battery): 670 g / 1 lb 8 oz

Notes: The Tone Science Triple Cross module is a design collaboration between electronic musician/composer Ian Boddy and AJH Synth.

It features three independant cross fader and panner channels, and it can be used with both audio and CV signals. Each of the channels can be configured in one of four different ways:

1) One In, One out Linear VCA

2) Two in, One out crossfader

3) One in, Two out panner,

4) Two in, Two out cross fader & reversing panner combined.

Audio rate modulation can also be used on the CV inputs to create Ring modulation and Cross modulation type sounds. Each channel has a dedicated Fade control, CV input, and CV Level attenuverter. These can be used together to bias incoming CV signals.

The L1 and L2 outputs from channels 1 and 2 are normalised to channel 3's inputs, which also have their own level controls to balance incoming signals. This allows very interesting, complex fading and panning between four different input sources, to either Mono or Stereo outputs..

The Triple Cross is very versatile, yet relatively simple to understand and use. However, as they say "knowledge is power", so do spend a little time reading about how to configure the channels in the four different modes, and how to combine all three channels together to create a super-powerful Four to Two to One cross fader.
Each of the three channels can be configured in four different ways, and all three can be used simultaneously. They do not all have to be in the same mode, so we could for example use channel 1 as a cross fader, channel 2 as a Panner for completely different signals, and channel 3 as a Linear VCA, again for different signals.

Specifications

Effective CV Range for CV-1, CV-2 and CV-3 is 0 to +5V with attenuverter fully clockwise or 0 to -5V with attenuverter fully anticlockwise.
Maximum permissible CV Range for CV-1, CV-2 and CV-3 is -12 to +12V
IN 1A to IN 3B Input levels -5V to +5V, levels up to +/-10V are possible however some clipping may occur.
Module Width: 14hp
Module Depth: 26mm (Including power lead)
Current Usage: 80mA Positive, 72mA Negative

Notes: High-quality compact studio monitors for the uncompromising creator

HS Series speakers have become the standard in studio monitors, trusted for many years by the world's top audio engineers, producers, and artists. Now Yamaha has redefined their essence in a compact housing. The HS3 and HS4 are powerful tools to help create a wide range of audio content-from music production to video editing-that meets the expectations of creators who have limited space and need to keep the volume down but do not want to compromise on monitoring quality.

Sound that is always true to the original

The HS3 and HS4 continue the design philosophy and know-how of previous Yamaha studio monitors. No effort has been spared in the pursuit of the optimal product, and the resulting speakers comprise carefully selecting parts such as a high-performance class-D amp, a highly resilient MDF cabinet, and woofers and soft dome tweeters that deliver a sound that is faithful to the source despite their small size. They also feature proprietary "Twisted Flare Port" technology that reduces air turbulence noise in the bass reflex port, providing clear and accurate bass. That's the secret to why the HS3 and HS4 deliver outstanding resolution, sound image, and depth, with a flat response across all bandwidths without any colouring of the original sound.

Optimal sound tailored to your environment

The sound produced by speakers is sometimes affected by the surrounding environment.

The rear panels of the HS3 and HS4 are equipped with ROOM CONTROL and HIGH TRIM functions that allow you to make adjustments to achieve the ideal sound for any environment, such as reducing the unneeded, exaggerated low-end that can often occur when speakers are placed next to walls.

Inputs and controls to fit any use case

The rear panel of the HS3 and HS4 is equipped with combination XLR/TRS phone, RCA, and stereo mini connectors, allowing you to connect to a wide range of professional and consumer equipment such as computers, audio interfaces, audio mixers, and electric instruments. The most commonly used features-power button, volume knob, and headphone connector-are located in the front for easy access.

Compact and portable

The compact size of the HS3 and HS4 was made possible thanks to the highly efficient class-D amp. Using one amp for two speakers has enabled us to both reduce the weight of the speakers and simplify the cable connections. They take up little space even in a small bedroom studio, and are easy to take with you on the road.

General specifications

Speaker type: 2-way powered speaker, Bass-reflex type
Frequency response (-10dB): 70 Hz - 22 kHz
Frequency response (-3dB): 85 Hz - 20 kHz
Crossover: 3.2 kHz
Maximum Output Level (Measured peak, IEC noise@1m): 100 dB SPL
Components: HF: 0.75" Dome, LF: 3.5" Cone
Nominal impedance: 6 O
I/O connectors: [Input Connector] L Side: COMBO (XLR/TRS Phone) ×2, RCA ×2, Stereo Mini, R Side: Speaker Input; [Output Connector] L Side: Headphone, Speaker Output
Output power: 26 W + 26 W (Dynamic, RL=6 O), 20 W + 20 W (THD 0.1%, 1kHz, RL=6 O)
Input sensitivity: LINE 1 (COMBO): +4 dBu, LINE 2 (RCA, ST Mini): -10 dBu (Volume: Maximum)
Input Level: LINE 1 (COMBO): +20 dBu, LINE 2 (RCA, ST Mini): +6 dBu (Maximum Input)
Input impedance: LINE 1 (COMBO): 20 kO, LINE 2 (RCA, ST Mini): 10 kO
Controls: Front: Volume, Rear: ROOM CONTROL SWITCH (0/-2/-4 dB under 500 Hz), HIGH TRIM SWITCH (+2/0/-2 dB above 2 kHz)
Indicators: Power ON (White LED)
Power requirements: Depending on area of purchase; 100-240 V, 50/60 Hz (*)
Power consumption: 15 W
Cabinet material: MDF

Dimensions

Width: L Side: 132 mm (5.2"), R Side: 132 mm (5.2")
Height: L Side: 223 mm (8.8"), R Side: 223 mm (8.8")
Depth: Side: 189 mm (7.4"), R Side: 177 mm (7.0")

Net weight: L Side: 2.8 kg (6.2 lb), R Side: 2.1 kg (4.6 lb)

Accessories: Stereo Mini - RCA Cable 1.5 m, Speaker Cable 2.5 m, Anti Slip Pad, Quick Start Guide, Safety Guide
Packaging: Pair

* While this product will work at a voltage of between 100 V to 240 V, as limiter settings vary depending on the supply voltage, make sure to use this product at the supply voltage indicated on the rear panel of this product.

Notes: Tiny but powerful studio monitors from Yamaha's hugely popular HS range. Impressive bass response all the way down to 60 Hz despite their compact dimensions. Here in their white colourway.

Supplier's Notes:
High-quality compact studio monitors for the uncompromising creator

HS Series speakers have become the standard in studio monitors, trusted for many years by the world's top audio engineers, producers, and artists. Now Yamaha has redefined their essence in a compact housing. The HS3 and HS4 are powerful tools to help create a wide range of audio content-from music production to video editing-that meets the expectations of creators who have limited space and need to keep the volume down but do not want to compromise on monitoring quality.

Sound that is always true to the original

The HS3 and HS4 continue the design philosophy and know-how of previous Yamaha studio monitors. No effort has been spared in the pursuit of the optimal product, and the resulting speakers comprise carefully selecting parts such as a high-performance class-D amp, a highly resilient MDF cabinet, and woofers and soft dome tweeters that deliver a sound that is faithful to the source despite their small size. They also feature proprietary "Twisted Flare Port" technology that reduces air turbulence noise in the bass reflex port, providing clear and accurate bass. That's the secret to why the HS3 and HS4 deliver outstanding resolution, sound image, and depth, with a flat response across all bandwidths without any colouring of the original sound.

Optimal sound tailored to your environment

The sound produced by speakers is sometimes affected by the surrounding environment.

The rear panels of the HS3 and HS4 are equipped with ROOM CONTROL and HIGH TRIM functions that allow you to make adjustments to achieve the ideal sound for any environment, such as reducing the unneeded, exaggerated low-end that can often occur when speakers are placed next to walls.

Inputs and controls to fit any use case

The rear panel of the HS3 and HS4 is equipped with combination XLR/TRS phone, RCA, and stereo mini connectors, allowing you to connect to a wide range of professional and consumer equipment such as computers, audio interfaces, audio mixers, and electric instruments. The most commonly used features-power button, volume knob, and headphone connector-are located in the front for easy access.

Compact and portable

The compact size of the HS3 and HS4 was made possible thanks to the highly efficient class-D amp. Using one amp for two speakers has enabled us to both reduce the weight of the speakers and simplify the cable connections. They take up little space even in a small bedroom studio, and are easy to take with you on the road.

General specifications

Speaker type: 2-way powered speaker, Bass-reflex type
Frequency response (-10dB): 60 Hz - 22 kHz
Frequency response (-3dB): 83 Hz - 20 kHz
Crossover: 2.3 kHz
Maximum Output Level (Measured peak, IEC noise@1m): 102 dB SPL
Components: HF: " Dome, LF: 4.5" Cone
Nominal impedance: 6 O
I/O connectors: [Input Connector] L Side: COMBO (XLR/TRS Phone) ×2, RCA ×2, Stereo Mini, R Side: Speaker Input; [Output Connector] L Side: Headphone, Speaker Output
Output power: 26 W + 26 W (Dynamic, RL=6 O), 20 W + 20 W (THD 0.1%, 1kHz, RL=6 O)
Input sensitivity: LINE 1 (COMBO): +4 dBu, LINE 2 (RCA, ST Mini): -10 dBu (Volume: Maximum)
Input Level: LINE 1 (COMBO): +20 dBu, LINE 2 (RCA, ST Mini): +6 dBu (Maximum Input)
Input impedance: LINE 1 (COMBO): 20 kO, LINE 2 (RCA, ST Mini): 10 kO
Controls: Front: Volume, Rear: ROOM CONTROL SWITCH (0/-2/-4 dB under 500 Hz), HIGH TRIM SWITCH (+2/0/-2 dB above 2 kHz)
Indicators: Power ON (White LED)
Power requirements: Depending on area of purchase; 100-240 V, 50/60 Hz (*)
Power consumption: 15 W
Cabinet material: MDF

Dimensions

Width: L Side: 150 mm (5.9"), R Side: 150 mm (5.9")
Height: L Side: 240 mm (9.4"), R Side: 240 mm (9.4")
Depth: L Side: 213 mm (8.4"), R Side: 203 mm (8.0")

Net weight: L Side: 3.7 kg (8.2 lb), R Side: 3.1 kg (6.8 lb)

Accessories: Stereo Mini - RCA Cable 1.5 m, Speaker Cable 2.5 m, Anti Slip Pad, Quick Start Guide, Safety Guide
Packaging: Pair

* While this product will work at a voltage of between 100 V to 240 V, as limiter settings vary depending on the supply voltage, make sure to use this product at the supply voltage indicated on the rear panel of this product.

Notes: Part of the new Boss 200 series, the RV-200 is a seriously classy reverb. With a choice of 12 algorithms, things quickly move from classic ambience to the pitch-shifted arpeggiated madness of the new Arpverb program.

Supplier's Notes:
Ambient Bliss

The RV-200 delivers inspiring reverbs and premium sound in the streamlined BOSS 200 series design. Twelve versatile reverb types-including the newly developed Arpverb-provide everything from subtle spatial colour to complex, dreamy textures for ambient explorations. Quickly dial in sounds with the fast-access interface. Save favourites in 127 memories. And take performances to the next level with flexible onboard footswitches, deep external control support, and head-turning creative tools like Warp, Twist, and more.

Studio-Grade Processing

The RV-200 features a powerful reverberation engine with class-leading sound quality, backed by custom BOSS DSP, 32-bit AD/DA, 32-bit floating point processing, and a 96 kHz sampling rate. Every algorithm offers true studio-grade performance, with exceptional detail and definition from the shortest early reflections to long, floating tails spanning multiple seconds.

Twelve Distinctive Reverbs

From essentials like Room and Hall to deeply immersive reverbs like Shimmer, Slowverb, and the cool new Arpverb, the RV-200 gives you the ambient colours you need for every song and style.

Room

Simulates the reverberation characteristics of a small room. Select from four room sizes with the Param knob.

Hall

Simulates the reverberation characteristics of a concert hall. Select from three hall sizes with the Param knob.

Plate

Simulates the reverberation characteristics of a studio plate reverb. Balance the high and low damping of the reverb with the Param knob.

Spring

Simulates the distinctive sound of the hardware spring reverb effect found in guitar amplifiers. Select the number of springs with the Param knob.

Shimmer

Creates long, dreamlike reverberations rich in harmonic content. Adjust the harmonic character and diffusion with the Param knob.

Arpverb

A newly developed BOSS reverb that creates an arpeggio type of sound with evocative pitch-shifted tails. Use the Param knob to adjust the attack of the arpeggio sound.

Slowverb

A sweet ambient reverb with gentle attack and soft harmonics. Param adjusts the amount of direct sound blended with the reverb, allowing you to create deep, immersive tones.

Modulate

Adds a modulation effect to a rich hall reverb sound. Adjust the modulation depth with the Param knob.

+Delay

Combines a delay with reverb, with the length of both effects controlled with the Time knob. Use the Param knob to adjust the delay level.

Lo-Fi

A specialty reverb with limited bandwidth and added distortion. Adjust the distortion amount with the Param knob.

Gate

A distinctive reverb effect that abruptly cuts off the reverb tail. Use the Param knob to control the timing of the gate effect.

Reverse

Plays the reverb sound in reverse. Adjust the high-frequency character with the Param knob.

Instant Sound Creation

Like all 200 series pedals, the RV-200 offers a powerful yet intuitive panel that lets you realize great sounds with minimal effort. Along with core parameters such as reverb time, effect level, and pre-delay, there are variable high and low filters to perfectly balance the verb for your application. You also have a density control to adjust the weight of the sound, plus a parameter knob with access to multiple sound-shaping tools that are unique to each type.

Expressive Performance Control

The RV-200 includes memories for storing 127 reverb sounds, so your favourite setups are always ready to go. Two onboard footswitches pack a lot of performance versatility, with numerous options to reassign their targets to suit your needs. For example, you can bypass the effect, scroll through memories, and activate a Hold function to carry on the reverb effect for as long as the switch is pressed. It's also possible to assign powerful performance effects such as Warp, Twist, and Fade.

Specifications

Sampling Frequency: 96 kHz
AD/DA Conversion: 32 bits
Processing: 32-bit floating point
Modes: 12 modes- ROOM, HALL, PLATE, SPRING, SHIMMER, ARPVERB, SLOWVERB, MODULATE, +DELAY, LO-FI ,GATE, REVERSE
Memory127 + Manual
Nominal Input Level: INPUT A/MONO, B: -10 dBu
Maximum Input Level: INPUT A/MONO, B: +7 dBu
Input Impedance: INPUT A/MONO, B: 2 M ohms
Nominal Output Level: OUTPUT A/MONO, B: -10 dBu
Maximum Output Level: OUTPUT A/MONO, B: +7 dBu
Output Impedance: OUTPUT A/MONO, B: 1 k ohm
Recommended Load Impedance: OUTPUT A/MONO, B: 10 k ohms or greater
Bypass: Buffered bypass
Controls: ON/OFF switch, MEMORY/HOLD switch, MODE knob, TIME knob, PRE-DELAY knob, E. LEVEL knob, PARAM knob, LOW knob, HIGH knob, DENSITY button, MEMORY button
Display: 7 segments, 3 characters (LED)
Indicator: DENSITY indicator, MEMORY (MAN, 1--4) indicators

Connectors
INPUT (A/MONO, B) jacks, OUTPUT (A/MONO, B) jacks: 1/4-inch phone type, CTL 1, 2/EXP jack: 1/4-inch TRS phone type, MIDI (IN, OUT) jacks: Stereo miniature phone type, DC IN jack, USB port: USB2.0 micro B (program update only)
Power Supply: Alkaline battery (AA, LR6) x 3, AC adapter (sold separately)
Current Draw: 260 mA

Expected Battery Life Under Continuous Use: Alkaline: Approx. 4 Hours
* These figures will vary depending on the actual conditions of use.
Accessories: Leaflet "USING THE UNIT SAFELY", Leaflet "To obtain the Owner's Manual", Alkaline battery (AA, LR6) x 3, Rubber foot x 4

Options (sold separately):
AC adaptor: PSA-S series
Footswitch: FS-5U
Dual footswitch: FS-6, FS-7
Expression pedal: FV-500H, FV-500L, EV-30, Roland EV-5
TRS/MIDI connecting cable: BMIDI-5-35, BMIDI-1-35, BMIDI-2-35, BCC-1-3535, BCC-2-3535

Size & weight

Width: 101 mm / 4 inches
Depth: 138 mm / 5-7/16 inches
Height: 63 mm / 2-1/2 inches
Height(including rubber feet): 65 mm / 2-9/16 inches
Weight: 610 g / 1 lb 6 oz
Weight (including battery): 680 g / 1 lb 8 oz

Notes: Zoom's top-of-the-range handheld recording option, the H6essential records up to six tracks via built-in stereo mics and four mic/line inputs. Top quality 32-bit/96 kHz recording quality.

Supplier's Notes:
Zoom H6essential Handy Recorder

The Flagship - Zoom's most robust handheld recorder, the H6essential is a recording powerhouse. With 6 tracks of 32-bit float recording, the H6essential provides unprecedented quality and unmatched versatility.

Features

6-track 32-bit float recorder with Dual A/D Converters
Clip-free recording with no need to set gain
Records up to 96kHZ sample rate
Interchangeable Mic Capsule System 3.0 with 32-bit float support
Included X/Y Mic Capsule captures up to 135 dB SPL
4 XLR/TRS combo inputs with locking connector
Colour LCD Screen
Built-in mixer to adjust each track's audio level
Built-in speaker for quick reference playback
3.5mm headphone output plus 3.5mm line output
Voice Guidance accessibility for the visually impaired
32-Bit Float audio interface for PC, Mac, iOS, and Android devices via USB-C port
Use as an interface and record to SD card simultaneously
Using the BTA-1* Bluetooth Adapter, sync with wireless timecode devices via bluetooth
Use the BTA-1* Bluetooth Adapter to pair with the H6essential Control App for iOS
Record to SD cads up to 1TB
10 hours of battery life on AA battery (2x) or USB-C Bus Power
*Please note: BTA-1 Adapter not included

Outputs you need

Use the line output to connect to a camera and the headphone output to monitor your audio.

Quieter controls

Recording and rotary controls have been meticulously designed to allow for silent operation.

Onboard speaker

Use the improved onboard speaker to listen to your recordings for quick reference.

Six perfect tracks

The 4 XLR/TRS combo inputs feature ultra-clean Zoom preamps, and the included X/Y microphones can capture up to a booming 135 dB SPL, equivalent to a jet taking off.

Record and stream

Use the USB-C port to connect to PC, Mac, iOS, and Android device to use the H6essential as a 32-bit float interface while simultaneously recording all 6 tracks to an SD card.

Pair with your iOS device

Use the BTA-1* Bluetooth Adapter to pair with your iOS device to remotely hit record, adjust your mix, view your waveforms, and change settings.

Bluetooth timecode

With the BTA-1* Bluetooth Adapter you can also pair with Bluetooth timecode devices for audio and video sync. *BTA-1 Adapter not included.

Specs

Input & output channels

Inputs
Mic capsule: 1
MIC/LINE (mono): 4

Outputs
LINE OUT: 1
Headphones: 1
Built-in speaker (mono): 1

INPUTS
XY mic: XYH-6e: 90O XY stereo format
Directionality: Unidirectional
Sensitivity: -42dB/1Pa at 1kHz
Maximum sound pressure input: 135 dB SPL

MIC/LINE (mono)
Connectors: 4 XLR/TRS combo jacks (XLR:2 HOT TRS:TIP HOT)
Input gain: Adjustment unnecessary (dual A/D converter circuits used)
Input impedance: MIC: 3.8 kO or more, LINE: 39 kO or more
Maximum input level: MIC: +4 dBu, LINE: +24 dBu
Phantom power: +48 V
Channel total: 32 mA or less
Equivalent input noise MIC: -120 dBu or less(IHF-A) @150 O input, LINE: -95 dBu or less(IHF-A) @600 O input

OUTPUTS

LINE OUT
Connector: Stereo mini jack
Maximum output level: +1 dBu
Output impedance: 110 O or less

Headphones
Connector: Stereo mini jack
Maximum output level: 20 mW + 20 mW(when 32 O load)
Output impedance: 10 O or less

Built-in speaker
Type: 20 mm x 30mm elliptical dynamic speaker
Effective maximum output: 250mW

RECORDER
Maximum simultaneous recording tracks: 8
Maximum simultaneous playback tracks: 6

Recording formats:
WAV
44.1/48/96 kHz,
32-bit float mono/stereo
BWF and iXML formats supported

Recording media: 4-32GB cards compatible with the microSDHC specification, 64GB-1TB cards compatible with the microSDXC specification

Display: 2.0-inch full-colour LCD 360 x 240

USB
Connector: USB Type-C - Use a USB cable that supports data transfer.
Audio Interface : USB 2.0 High Speed
Input and output channels: 6 in / 2 out (Multi), 2 in / 2 out (Stereo)
Sampling frequency: 44.1/48/96 kHz (AIF only), 44.1/48 kHz (AIF + onboard recording)
Bit depth: 24-bit, 32-bit float
File transfer: USB 2.0 High Speed

Remote

Dedicated wireless adapter: ZOOM BTA-1

Power

4 AA batteries: Alkaline, lithium or rechargeable NiMH batteries
AC Adapter: ZOOM AD-17 (DC 5 V/1 A) - USB bus power is supported.

Estimated continuous operation times using batteries: 2-track recording (XYH-6e)
Alkaline batteries: About 18 hours
NiMH batteries (1900 mAh): About 14.5 hours
Lithium batteries: About 30 hours

48 kHz/32-bit float with phantom power off, no headphones, no LINE OUT, no REMOTE, Power Saving on, Display Brightness Medium
These values are approximate.
Continuous battery operation times were determined using in-house testing methods.They will vary greatly according to use conditions.

Estimated continuous operation times using batteries: 6-track recording (XYH-6e and inputs 1-4)
Alkaline batteries: About 3.5 hours
NiMH batteries (1900 mAh): About 4 hours
Lithium batteries: About 9 hours
48 kHz/32-bit float with phantom power off, headphones used (33O load), no LINE OUT, no REMOTE, Power Saving on, Display Brightness Medium
These values are approximate.
Continuous battery operation times were determined using in-house testing methods.They will vary greatly according to use conditions.

Power consumption: 5 W maximum

Dimensions
Recorder: 78.1 mm (W) × 160.1 mm (D) × 42.8 mm (H)
XYH-6e: 69.1 mm (W) × 50.8 mm (D) × 43.0 mm (H)
Weight Recorder: 381 g (including batteries)
XYH-6e: 42 g
Note: 0 dBu = 0.775 Vrms

Notes: ART QUAD QUANTIZER is a four channel CV to ART Quantizer to play ART oscillators from CV sequencers, LFOs and anything that outputs CV. This is TipTop#s second ART controller option and is designed for those of us playing ART without a computer or MIDI source. The inputs take in positive, negative, bipolar CV voltages. Scales include Major Minor and the five other modes (Dorian, Lydian, etc). The module is simple to set up with a simple menu and one knob with switch for navigation. The 4th channel can be set to generate Chords and polyphonic note streams for ART Polyphonic oscillators.

Size: 8HP
Depth: 40mm / 1.5"
Power: +12V 38mA / -12V 4mA

Notes: How It Works

Chaining up an EQ, compressor and overdrive pedal will never give you the same result as SkarBassOne achieves, not by a long shot! The precise filters in SkarBassOne is what gives you the extremely surgical tone and the wide range of possibilities without breaking a sweat!

No matter the settings you will always keep the clean powerful low end with this multiband overdrive and that is a must for bass. Controlling the mids of a bass sound has never been easier! You will get out of the way from other instruments masking frequencies and take up all the space that is ment for you and ONLY you!

It might look simple on the outside, but I assure you the inside is a matrix of years with development. The flexible multiband drive is smooth all the way thru it's range and I promise you it will never ever mess with your low end!

Details

Compression:

One knob FET compressor with fast attack and release. It handles dynamics with ease and creates a solid wall of tone.

Compression LED:

Visual indication of how hard the compressor is working.

Mid:

Mid filter to achieve the surgical studio tone! Create a defined, in the pocket frequency response for the bass to sound massive and to make it sit with other instruments. Your band mates will never beg you to turn down your bass again!

Mix:

Quickly set the tonal balance between low frequencies and high frequencies. Find the sweet spot in any situation.

Footswitch:

On/Off switch for Drive and Tone.
Red channel =Drive and Tone active.
Blue channel = Drive and Tone off.
Compression, Mid and Mix is active on both channels.

Drive:

Set the amount of multiband drive, from gentle push to full on bark!

Tone:

Hi-cut filter to control the high frequencies of the output.

Notes: The updated "Skiff friendly" design of the mml filter now features bipolar "Attenu-verters" for the cv controls as well as an all new red mode!

This new mode activates a feedback distortion circuit capable of actually changing the pitch of the notes coming in to the filter in a musical way that adds instant variety to acid basslines, creates weird and strange alterations to drones or adds some nice overdriven distortion to whatever goes into it!

The multi-mode ladder (mml) filter is based on the classic transistor ladder low pass filter by dr. Robert a. Moog. This filter updates the classic 4-pole ladder design to provide band pass and high pass filter responses as well as the traditional low pass filter. There are 2 bipolar controls with attenu-verters for the cut-off frequency plus a cv input for the resonance.

The core of the circuit features a fully discrete transistor design with an op-amp buffered output, this allows soft saturation of the input signal to get the classic overdriven tones of the ladder filter. A bass compensation circuit has been included to retain the bass response in low pass mode when the resonance is increased. The bass compensation also helps to improve the response of the high pass filter.

The red mode is activated/de-activated by holding the mode button for 0.3s. In this mode the filter cut-off, input volume and resonance all interact and the effect is to produce alterations to the incoming frequencies. The pitches of the audio coming into the filter also affect the alterations as well selecting between low pass, band pass and high pass filter modes whilst in red mode.

Features

Low pass, band pass and high pass modes.
Red mode feedback distortion.
CV controlled resonance.
Added low frequency compensation.
Soft saturation of input.
2 x bipolar attenuverter CV inputs.

Width: 6 HP
Depth: 25mm
Power: +12v = 50ma / -12v = 39ma

Notes: Drums4 is a 4 voice, sample based percussion sound generator.

Each voice can select its sound from a 48 sample global bank, samples are curated from the manufacturer's collection of percussion sources used in their music.

Each sample can be tuned and has an individual output for independent processing , and there's also a simple mixer that controls levels to the main mixed output.

Operation is simple and intuitive, the selected sample is remembered after power down for each of the 4 voices.

Incoming triggers are displayed on each voice LED indicator.

Controls:
for each voice:
-PITCH potentiometer : for tuning sound over a wide range.
-SAMPLE SELECTOR encoder : allows choosing among 48 global samples , setting is
remembered after power down
-MIX potentiometer: adjust blending of each voice to the mix output

Connectors:
for each voice
TRIGGER jack : trigger or gate input , accepts a wide range of sources from 5v to 12v
OUT jack : individual sound output for voice
CV jack : allows external control of voice pitch, 0 to 5 volts range, over voltage protected.
Main Mix jack: summed output of mixed voices, controlled with mix pots.

Specifications:
width : 12HP
depth: 28 millimeters
Power consumption: 130 milliamps +12v , 10 milliamps -12v

Notes: This new pedal in Maneco's line is a versatile fuzz device , true stereo and with powerful tone shaping capabilities.

Main features:

True Stereo operation
Silicon Transistors gain stage.
Big Muff tone stack
Buffered clickless Bypass
Input gain for fine tuning distortion quality, also adapting for wide range of input signals
Bass, guitar , drum machines and synthesizer friendly
9v standard power supply, center tip negative

Notes: The perfect companion now comes in a smaller package - introducing Sidekick JR by Crazy Tube Circuits!

Drawing inspiration from the original Sidekick pedal released back in 2019, the aim was to create a compact pedal that combines the most widely used time-based effects, suitable for any gear setup seeking 80s tones and beyond.

From the jangly, ambient, and shimmering sounds of New Wave, Shoegaze, and Synth Pop to the wet tones of Hair / Glam Metal. Crazy Tube Circuits' Sidekick JR offers even more sounds / algorithm selections compared to the original unit.

The modulation effects / algorithms take inspiration from classic 80s stompboxes. The "Ensemble" algorithm replicates warm and mild modulated chorus sounds, while the "dimension" algorithm enhances the 3D image of your sound without the typical chorus warble. The "flanger" algorithm draws from a classic flanger pedal set up as a slow chorus with mild feedback added for a more metallic sound.

The Echo / delay section provides the sweet and vibrant sound of a tape echo with a freshly installed tape running through a colourful preamp, or the pristine repeats of an 80s digital delay rack unit.

The Reverb section in Sidekick JR is inspired by definitive examples of 80s reverb rack units and offers two algorithm banks. Bank A includes all-time classic reverb sounds like "plate," "spring," and "hall," while Bank B features signature 80s reverb sounds like "gated," "exciter" (Crazy Tube Circuits' trademark big-hall reverb algorithm with almost infinite reflections and decay), and octave-up "shimmer."

To provide full flexibility in the smallest enclosure possible, Crazy Tube Circuits has devised a smart switching setup. The delay and reverb effect sections of Sidekick JR operate independently from each other, and the modulation is assignable to any of these sections as standard. With the addition of the XT footswitch (available separately), the modulation section becomes entirely independent and can be switched on/off (true bypass) on its own.
Crazy Tube Circuits' Sidekick JR also features a power-up bypass/engage pre-set function for the onboard footswitches. This feature allows users to select the state the pedal will go to when the power supply is plugged in. It's particularly useful for individuals who use remote pedal switchers /loopers, as they can set the power-up state of the pedal once and then operate it from the controller.

Notes: DigiTech announces SDRUM Strummable Drums, the first-ever intelligent drum machine for guitarists and bassists. Boasting studio-quality samples and five professional sounding drum kits and BeatScratch technology, SDRUM allows users to create drum patterns by simply strumming strings.

As a player scratches across guitar or bass strings, he or she "teaches" SDRUM a kick/snare pattern that defines a desired beat. Once that pattern is established, SDRUM then enhances and enriches the beat, resulting in a realistic accompanying drum part. From the five different kits, users are able to choose sounds appropriate to a broad variety of musical styles. Via the KICK and SNARE Pads, players can audition the various kits and tap in specific beats, while the GUITAR AUDITION Button enables the user to turn the drum output on or off while strumming.

Up to 36 songs can be stored in SDRUM, and the unit supports three different components - e.g. verse, chorus, bridge - for each that can be switched on in real-time to easily facilitate live performance and aid in composition and creativity. Additionally, JamSync functionality facilitates compatibility with JamMan loopers, further boosting SDRUM's capacity in concert, practice, and studio settings.

The compact SDRUM (5.25" x 3.15" x 2.3") is similar in size to most compact effects units and fits easily on standard pedalboards. A sturdy metal chassis, robust footswitch, and four knobs (GROOVE/KIT, LEVEL, TEMPO, and HAT/RIDES) ensure that SDRUM is stage- and road-ready.

Eliminating the need to sift through libraries of rhythm patterns in search of an appropriate match for individual songs and styles, SDRUM is the fastest way to go from a beat idea to a working drum track.

BeatScratch Technology
JamSync Support
Studio-quality samples
Five drum kits
Verse/Chorus/Bridge parts
Alternate instruments/voicings
External FS3X support
Kick/Snare pads
Controls: Tap Tempo, Verse/, Chorus, Bridge, Song, Groove/Kit, Hats/Rides, Level, Temp, Alt Kit, Alt Hats/Rides, Guitar Audition, Kick Snare, Footswitch
5.25" (L) x 3.15"(W) x 2.3" (H)/ 133mm (L) x 80mm (W) x 58mm (H)
1.12 lb./.51 kg
Power Supply (external - included): PS0913DC-04 (US, JA, EU, AU, UK)
Warranty: 1 Year

Notes: Inspired by the vintage Bell and Howell 385 Filmosound projector that guitarists have modified and used as guitar amps, Walrus has created a dynamic and responsive overdrive modeled after the projector's tone.

The 385 was developed to have the same simple but effective tone control as it's older relative, but unlike the projector, the 385 breaks up the single tone control and integrates separate, boost and cut bass and treble, allowing the player to get more creative with mid-frequency scoops and bumps allowing for a much wider array of tones to be achieved.

The pedal is internally running at 18v, which helps us nail the same dynamic feel of the amp in a stomp box.

This means it is extremely sensitive to how hard you dig in - just like the amp.

Updated for 2023.

Controls:

Bypass: Soft touch, relay true-bypass. Press the switch to engage/disengage the pedal. LED indicates whether the circuit is engaged or not.
A/B: Soft touch switch. Press to swap between using either A (White) or B (Red) Volume and Gain controls. LED indicates which controls are being used - White for A, Red for B.
Volume A: Controls the overall volume in the A setting. Turn clockwise for more volume, counter-clockwise for less volume.
Gain A: Controls the overall gain in the A setting. Turn clockwise for more gain, counterclockwise for less gain.
Volume B: Controls the overall volume in the B setting. Turn clockwise for more volume, counter-clockwise for less volume.
Gain B: Controls the overall gain in the B setting. Turn clockwise for more gain, counterclockwise for less gain.
Treble: Used to adjust the level of the treble frequencies. Turn clockwise to increase the level of the treble frequencies. Turn counter-clockwise to reduce the level of the treble frequencies.
Bass: Used to adjust the level of the bass frequencies. Turn clockwise to increase the level of the bass frequencies. Turn counter-clockwise to reduce the level of the bass frequencies.
385+ Switch: When the switch is down, you are able to achieve classic 385 sounds. Flip the switch up to add an additional gain stage to the input of the pedal, achieving heavier gain sounds and driving the pedal harder.

Specifications

The 385 comes in a matte black finish with yellow and red ink featuring original artwork of a vintage Belle and Howell 385 projector by David Huttner ready to give you the dynamic tone you've been searching for.
The die cast enclosure's exact size is 12.1 x 6.6 x 3.5 cm
Power requirements are 9VDC (100mA minimum). The use of an isolated power supply is recommended for powering all Walrus Audio Pedals.
Daisy chain power supplies are not recommended. Power supply not included.
Input: 1/4" TS, Unbalanced, 1M impedance
Output: 1/4" TS, Unbalanced, 10k impedance
True Bypass

Notes: Great value from this compact digital mixer. Pocket-sized four-channel design with one mic input and three line inputs. DSP effects include reverb, shimmer, delay, compression, limiting and EQ.

Supplier's Notes:
GigMix 4-1 mini Digital mixer, porting the engine from the StompMix 4, the GigMix 4-1 is built with a powerful 32-bit 100Mhz DSP engine and a compact lightweight pocket size package. The GigMix 4-1 mini digital mixer offers a full featured, highly intuitive four channels Digital Mixer with a Color Display. 4 effects level control for Reverb and Shimmer. Assignable Delay effects. The DSP engine provides a compressor, limiter, Mid sweepable EQ, Highpass Filter, Notch Filter, Phase reverse to each of the 4 inputs. Analog inputs consisted of 1 Class A solid-state Mic pre-amps and three 1/4" TS line/Instrument inputs. Two sets of stereo Mix outputs are selectable between a 1/8" TRS jack and 2 1/4" TRS jacks with output level control knob . 2 assignable switches, 1/4" TRS Balanced outputs. 10 Memory for easy recall and set up. Mic Stand mounting accessory is also available. The size/functionalities of the Gigmix 4-1 mini digital mixer makes it the great pocket live gig mixer to your guitar/vocal setup.

Features

4-Channel Mini Digital Mixer
10 user scene memories.
Colour display
Input Level Monitoring
1 Class-A Mic inputs with TRIM (CHAN 1)
3 LINE/INSRT inputs with Level Control(CHAN 2, 3 and 4)
Independent Reverb, Shimmer effect on each channel
2 notch filter available on each channel
High Pass Filter and Phase Reverse on each channel
Noise Gate and Compressor on each channel
3 Band EQ with Sweepable MID on each channel
Max 1 second Delay with Tap Tempo (assign to one Channel at a time)
Assignable A/B switch functions (MUTE channels, EFX by-pass, Tap Tempo, Scene change etc)
Output 1 (L/R TRS 1/4" jacks) - Balanced
Output 2 (Stereo TRS 1/8" jack)
Output 2 can be used for Headphones
Main MIX and AUX MIX
Scenes Change - via A/B switches
Metal chassis
AC/DC power supply included
Support 9VDC to 12VDC power inputs (500mA, 2.1mm *Center Positive*)
Designed and assembled in USA

Notes: Dial in Professional Sounds in Seconds

The BOSS ME series has been a favourite of performing guitarists for over three decades, combining multi-effects power with intuitive hands-on control for crafting tones in seconds. The ME-90 is the most advanced ME model to date, offering exceptional audio quality, flagship-grade AIRD amp models, IR loading, an effects loop, and more. Compact, battery-powered, and filled with premium BOSS tones, this versatile all-in-one processor makes it easy to build customized sound setups for every playing situation.

Fast Sound Creation

With its knob-driven interface and diverse effects selection, the ME-90 lets you build configurations and tweak tones with the ease of a stompbox-filled pedalboard-without the hassle of fastening tape, power distribution, and multiple connection cables. Just dial up an amp model or effect type within a category and turn the knobs to get the sound you want. There are 36 preset patches with ready-to-play pro tones, plus 36 user patches for storing your custom creations.

Flexible Real-Time Control

The ME-90 features eight footswitches with smooth, quiet operation and an expression pedal with an integrated toe switch. Use Memory mode to call up complete patch setups with the footswitches, and then switch to Manual mode for direct on/off control of each effect category within the patch. The footswitch LEDs light in different colours for quick identification in the heat of a performance. It's also possible to set all LEDs to light in a fixed colour for each mode if desired.

High-Quality BOSS Effects

The ME-90 puts a massive library of BOSS effects at your command, offering seven different categories filled with selections derived from the flagship GT-1000. Everything you need is here, from overdrives and distortions to pitch/mod effects, delays, and high-quality reverbs. You also get 11 dedicated Pedal FX, a looper, and specialized effects such as acoustic simulation and down tuning. There are 60 effect types in total, with access to over 20 more via BOSS Tone Studio. A send/return loop is available for external pedals, complete with the ability to save the on/off status in patches and place the loop before or after amp models in the signal chain.

Premium Amp Sounds with AIRD Technology

Along with its effects, the ME-90 includes amp models ported from the GT-1000, driven by our advanced AIRD technology for authentic tube tone and touch response. Eleven onboard amp types offer everything from clean combo sounds to punishing high-gain stacks, and you can access more selections in BOSS Tone Studio. Each amp includes a dedicated cab sound for connecting to a PA or recording device, and you can load three of your favourite speaker IRs to personalize sounds to your taste.

Edit, Customize, and Expand

BOSS Tone Studio for macOS and Windows extends your creative range, allowing you to edit tones and change out some amp and effect types with alternate selections. In addition, you can save and organize patches for different gigs, download pro setups at BOSS Tone Central, and swap patches with the ME-90 community on BOSS Tone Exchange. The ME-90 also supports the optional Bluetoothr Audio MIDI Dual Adaptor, enabling you to stream music from a mobile device and wirelessly shape tones using the dedicated BTS editor app for iOS and Android.

Light, Durable, and Ready to Travel

The ME-90 is lighter than its previous generation model while maintaining the rock-solid durability that BOSS is famous for.

Specifications
Sampling Frequency: 48 kHz
AD Conversion: 24 bits + AF method
AF method (Adaptive Focus method) This is a proprietary method from Roland & BOSS that vastly improves the signal-to-noise (SN) ratio of the AD and DA converters.
DA Conversion: 32 bits
Processing: 32-bit floating point
Effects: 97 Types
Memories: 36 (User) + 36 (Preset)
Phrase Loop: 38 sec. (MONO)
Tuner Internal Detection: +/-0.1 cent
Nominal Input Level: INPUT: -10 dBu, RETURN: -10 dBu
Maximum Input Level: INPUT: +7 dBu, RETURN: +7 dBu
Input Impedance: INPUT: 1 M ohm, RETURN: 1 M ohm
Nominal Output Level: OUTPUT (L/MONO, R): -10 dBu, PHONES: -10 dBu, SEND: -10 dBu
Output Impedance: OUTPUT (L/MONO, R): 1 k ohm, PHONES: 44 ohms, SEND: 1 k ohm
Recommended Load Impedance: OUTPUT (L/MONO, R): 10 k ohms or greater, PHONES: 44 ohms or greater, SEND: 10 k ohms or greater

Controls:BANK DOWN/AMP switch, BANK UP/EQ switch, CTL/REV switch, MEMORY/MANUAL switch, 1/COMP switch, 2/OD/DS switch, 3/MOD switch, 4/DELAY switch, PEDAL FX switch, Gt. AMP/LINE switch, POWER switch, EXIT button, WRITE button, CTL button, EDIT button, PREAMP TYPE knob, GAIN knob, BASS knob, MIDDLE knob, TREBLE knob, LEVEL knob, REVERB knob, COMP/FX1 TYPE knob, SUSTAIN/SENS/-1OCT knob, ATTACK/TONE/-2OCT/DEPTH knob, LEVEL/PEAK/DIRECT knob, OD/DS TYPE knob, DRIVE knob, TONE knob, LEVEL knob, MOD TYPE knob, RATE/KEY knob, DEPTH/HARMONY knob, E.LEVEL/RESONANCE knob, DELAY TYPE knob, TIME knob, FEEDBACK knob, E.LEVEL knob, OUTPUT LEVEL knob, PEDAL FX TYPE knob, PEDAL FX pedal
Display: 7 segments, 2 characters (LED)

Connectors: INPUT jack, OUTPUT (L/MONO, R) jacks, SEND jack, RETURN jack: 1/4-inch phone type
PHONES jack: Stereo miniature phone type
USB COMPUTER port: USB Type-C(R)
Bluetooth ADAPTOR connector: Dedicated connector
DC IN jack

Power Supply: Alkaline battery (AA, LR6) x 4 or AC adapter
Current Draw: 190 mA

Expected battery life under continuous use:
Alkaline battery: Approximately 6.5 hours
* This can vary depending on the specifications of the batteries, capacity of the batteries, and the conditions of use.
Accessories: STARTUP GUIDE, Alkaline battery (AA, LR6) x 4, Leaflet "USING THE UNIT SAFELY"

Options (sold separately)
AC adaptor: PSA-S series
Bluetooth(R) Audio MIDI Dual Adaptor: BT-DUAL
Carry Bag: CB-ME80,CB-BU10

Size & weight

Width: 443 mm / 17-1/2 inches
Depth: 220 mm / 8-11/16 inches
Height: 67 mm / 2-11/16 inches
Maximum Height: 93 mm / 3-11/16 inches
Weight(including battery): 2.9 kg / 6 lb / 7 oz

Notes: Make any studio monitors sound better

High-definition monitoring for all

Upgrade any studio monitors instantly with the first out-of-the-box acoustic room correction system that anyone can afford. ARC Studio combines a standalone correction processor, new ARC 4 measurement software and a room analysis microphone.

There's a reason all today's top-tier studio monitors are adding active room correction - it supercharges their performance and ensures mixes translate flawlessly. ARC Studio offers this same massive boost in performance and accuracy to any monitor in every studio.

For the first time in the recording industry, an affordable hardware processor can be used as a correction and calibration system for any type of studio - be it home, project or professional - without the limitations of a software-only system.

Standalone digital acoustic correction system
Dramatically improves your mixing accuracy
Works with any monitor system in any room
Installs in minutes in any studio or space
Sonically invisible, audiophile performance
Emulates top monitors and playback systems
Customize your monitors' performance to taste

Improves mixing accuracy

Your room has a big impact on how you hear your music. The size, shape, materials and furniture all work to distort the frequency and stereo balance of your monitors, degrading your sound.

ARC 4's all-new algorithm analyses and corrects these issues in minutes. Your music snaps into focus, with more controlled low-end, tighter transients and pinpoint stereo imaging. It's like an instant upgrade to your monitors.

And when you trust what you hear, you'll mix faster and more confidently than ever.

Installs in minutes

Plug the mic into your interface and you'll be guided through measuring acoustical spots within your listening position. IK's award-winning ARC technology uses this 3D snapshot to identify and completely correct all the problematic issues degrading your monitors' performance.

An all-new listening experience

ARC 4 stores the correction profile and loads it into the ARC Studio processor, sitting invisibly between your interface and monitors to apply to all incoming signals. The standalone processor corrects studio monitors in any studio, including hardware- and console-based setups.

Audiophile performance

ARC Studio features a 120 dB(A) analogue input to analogue output dynamic range, 0.5 Hz to 40 kHz frequency response and ultra-stable clocking for vanishing low jitter, offering total sonic transparency and a level of accuracy you only find in mastering-grade audio converters.

And it connects to your studio and monitors via balanced XLRs with power-safe relay-based hard bypass - so when bypassed you're protected from sudden power-related pops. Between the premium audio quality and ARC Studio's all-new correction algorithm, you'll enjoy the most natural, transparent monitoring ever.

Affordably priced

ARC Studio hardware is not only designed and made in Italy to the highest precision and quality standards, but its clever engineering makes it available at a fraction of the cost of other hardware solutions.

Now everyone can dramatically improve the sound in their mixing environments: from a single pair of monitors to multiple monitoring systems, up to large facilities with multiple mixing and recording rooms.

Improves any studio

For pro studios, whether in-the-box or console-based, ARC Studio allows for a sonically transparent correction and custom-tuning for any monitoring setup from nearfields to mains, preserving the inherent system's sonic quality.

For DAW-based studios, ARC Studio frees you from the hassle of inserting plug-ins on the master bus of your work and preserves zero-latency monitoring setups, plus it allows you to listen to your preferred streaming service with acoustically corrected monitoring without messing around with system drivers.

You can create a profile for every configuration, listening position or even monitor pair. Whether you're in a makeshift studio or a world-class one, fine-tuning your monitoring to your taste has never been easier and has never sounded so good.

Customise your monitors

Customise your setup for ideal performance no matter your preference. ARC 4 offers deep control over each profile so it always sounds its best:

Target curves

ARC 4 now comes with 9 factory target curves for most situations. The default curve offers optimally balanced results with other specific curves for different needs or setups.

Adjustable correction range

By default, ARC corrects the entire frequency spectrum, but you can define limits to both upper and lower correction ranges separately. This is useful if you want to preserve the unique voicing of your monitors or are just looking to correct a certain frequency range.

Specs

ARC Studio Specifications

Audio

AD and DA converters: AKM Velvet Sound™
Audio conversion and internal processing sampling rate: 96 kHz
Audio conversion resolution: 24-bit
Internal processing resolution: 32-bit float
Frequency Response: 2 Hz - 45.0 kHz (- 2.0 dB)
Dynamic Range: 120 dB (A-weighted)
THD (20-20 kHz): 0.00035%
THD+N (1 kHz@-1dBFS): -107 dB
Channel Crosstalk (1 kHz): -122.5 dB
Max Phase Deviation: +7- 20Hz, +16- 22kHz
Input Impedance (balanced): 20 kOhm
Output Impedance (balanced): 50 Ohm
Maximum output level: +17 dBu

Latency

Natural Phase mode: 1.4 ms
Linear Phase mode: 42 ms

Power

Powered by included Power Supply Unit
Dimensions

Size: 14.4cm / 5.6" x 12cm / 4.72" x 4.5cm / 1.77"
Weight: 465g / 1,03lb

Package includes

ARC Studio room-correction processor
ARC Measurement Microphone (depending on the version)
ARC Measurement Microphone Clamp (depending on the version)
USB C-Type to USB A-Type cable (1.5 m / 4.92')
Power Supply Unit
Registration card

System Requirements

Macr (64-bits)
Minimal: Apple M1 or Intelr Core i5 Processor, 4 GB of RAM, macOSr 10.15 or newer (macOS 11 or newer required for Apple Silicon Processors).
Supported Plug-in formats: Audio Units, VST 2, VST 3, AAX.
Works with any audio interface with a phantom powered XLR microphone input and a pair of outputs for monitoring.
44.1 kHz or 48 kHz sampling rate is required for the measurement process.
One free USB port required.

Windowsr (64-bits)

Minimal: Intelr Core i5 Processor or equivalent, 4 GB of RAM, Windows 10 (64 bit) or newer.
Supported Plug-in formats: VST 2, VST 3, AAX.
Works with any audio interface with ASIO drivers, a phantom powered XLR microphone input and a pair of outputs for monitoring.
44.1kHz or 48kHz sampling rate is required for the measurement process.
One free USB port required.

Requires an OpenGL 2 compatible graphics adapter.

Notes: *** B-STOCK: Box opened, but product is in excellent condition and in perfect working order ***


Field recorder meets interface in this clever offering from IK's iRig range. Essentially a 4-in/2-out audio and MIDI interface with built-in mics, the Quattro is portable, versatile and high quality.

Supplier's Notes:
Pro recording and performing, in the palm of your hand

iRig Pro Quattro I/O is a professional-quality 4 in / 2 out portable audio and MIDI interface packed with everything needed for field recording and content creation, for serious sound and flexibility - anywhere.

Small enough to fit in the palm of your hand, the iRig Pro Quattro I/O still packs in four high-quality, low-noise mic preamps; instrument, RCA and TRS inputs; plus XLR balanced, 3.5mm stereo and headphone outputs - and full MIDI I/O!

iRig Pro Quattro I/O works right out of the box with iPhone, iPad, Android, Mac and PC, but can also serve as a stand-alone mic preamp or line mixer, with a built-in limiter and direct monitoring so you're always guaranteed the perfect take.

Packed with a swiss-army-knife's worth of tools, iRig Pro Quattro I/O ensures you're ready for anything, anywhere.

As a mobile interface

Connected to a computer or mobile device, the iRig Pro Quattro I/O will work as a high-quality, multi-channel audio and MIDI interface with a full array of inputs and outputs so you'll always be prepared for any recording or need. Fully MFi-certified, no adaptors are required for iPhone or iPad for reliable field performance on any device.

As a broadcast / podcast interface

Enable STEREO mode and iRig Pro Quattro I/O mixes all sources down to stereo for streaming or recording. Monitoring is easy thanks to a dedicated headphone output with independent volume control and direct monitoring. Or use MONO mode for streaming to social media; Loopback lets you duet your favourite videos easily.

As a field recording interface

With an onboard microphone and optional stereo mic capsules, iRig Pro Quattro I/O turns your iPhone, iPad, Android device into a full-featured, professional field recorder.

As a stand-alone mixer

iRig Pro Quattro I/O also works as a preamp and mixer: just power it via battery, USB or DC IN and use the full set of inputs/outputs to capture and mix multiple sources to your DSLR camera with professional quality.

Always perfect recordings with the safety backup channels

In STEREO and MONO mode, inputs 3 and 4 can be used as safety channels: recording the same signal as input 1 and 2 but reduced by 12dB as a backup in case the sound source unexpectedly overloads the main channels.

Audio quality without compromise... wherever you are

Up to 24-bit, 96 kHz sample rate Ultra-low-noise mic preamps with full +48v phantom power Professional-quality, transparent A/D and D/A conversion Built-in limiter, for input 1-2, to protect against clipping Multitrack, stereo or mono internal mixdown.

Specifications

Microphone Input
Microphone Input: balanced female 3-pin, XLR. Pin 2: hot / Pin 3: cold / Pin 1: ground
Microphone Input Level: from 6 mVpp to 1.4 Vpp
Microphone Input Impedance: 3.2 kOhms
Gain Range: 40 dB
Phantom Power: +48V i 4V
Frequency Response: 20 Hz - 20 kHz +/-1.5dB
Input Noise: -103 dB(A), -97 dB RMS

Instrument Input
Instrument Input: unbalanced, Hi-Z, TS 1/4" Jack, Tip: signal / Shield: ground
Instrument Input Level: from 30 mVpp to 6.9 Vpp
Instrument Input Impedance: 1 MOhms
Gain Range: 27 dB
Frequency Response: 20 Hz - 20 kHz +/-1.5dB
Input Noise: -103 dB(A), -97 dB RMS
Stereo Headphone Output
Connector: 1/8" TRS Jack. Tip: right / Ring: left / Shield: ground
Headphone Level Control numbered thumbwheel
Headphone Level Power 100mW into 50 Ohms

Stereo Headphone Output
Connector: 1/8" TRS Jack. Tip: right / Ring: left / Shield: ground
Headphone Level Power 100mW into 50 Ohms

MIDI Input/Output
Connector: 2x2.5mm TS Jack
Other Input/Output
DC barrel: 1x DC barrel. For power and device charging.
Device Connector: mini-DIN

Common
Conversion: 24-bit A/D, 24-bit D/A
Sampling Rate: 44.1 kHz, 48 kHz, 88.2 kHz and 96 kHz

Power:
- USB bus powered when used with a computer
- Battery powered (2xAA included) when used with an iOS device
- DC power supply (not included, iRig PSU 3A sold separately)*

Package includes
iRig Pro I/O universal Audio-MIDI interface
Lightning to Mini-DIN connection cable with charging features (60cm/23.62")
USB-A to Mini-DIN connection cable (60cm/23.62")
USB-C to Mini-DIN connection cable (60cm/23.62")
2.5mm TRS male to MIDI female adapter (10cm / 3.9")
2 x 1.5V AA Battery
Velcro strip

Dimensions
Size: 43mm/1.69" x 127mm/5" x 37mm/1.46"
Weight: 120g/4.23oz (batteries excluded)

Notes: ***B-STOCK: Box opened, but product is in excellent condition and in perfect working order***


Zoom's top-of-the-range handheld recording option, the H6essential records up to six tracks via built-in stereo mics and four mic/line inputs. Top quality 32-bit/96 kHz recording quality.

Supplier's Notes:
Zoom H6essential Handy Recorder

The Flagship - Zoom's most robust handheld recorder, the H6essential is a recording powerhouse. With 6 tracks of 32-bit float recording, the H6essential provides unprecedented quality and unmatched versatility.

Features

6-track 32-bit float recorder with Dual A/D Converters
Clip-free recording with no need to set gain
Records up to 96kHZ sample rate
Interchangeable Mic Capsule System 3.0 with 32-bit float support
Included X/Y Mic Capsule captures up to 135 dB SPL
4 XLR/TRS combo inputs with locking connector
Colour LCD Screen
Built-in mixer to adjust each track's audio level
Built-in speaker for quick reference playback
3.5mm headphone output plus 3.5mm line output
Voice Guidance accessibility for the visually impaired
32-Bit Float audio interface for PC, Mac, iOS, and Android devices via USB-C port
Use as an interface and record to SD card simultaneously
Using the BTA-1* Bluetooth Adapter, sync with wireless timecode devices via bluetooth
Use the BTA-1* Bluetooth Adapter to pair with the H6essential Control App for iOS
Record to SD cads up to 1TB
10 hours of battery life on AA battery (2x) or USB-C Bus Power
*Please note: BTA-1 Adapter not included

Outputs you need

Use the line output to connect to a camera and the headphone output to monitor your audio.

Quieter controls

Recording and rotary controls have been meticulously designed to allow for silent operation.

Onboard speaker

Use the improved onboard speaker to listen to your recordings for quick reference.

Six perfect tracks

The 4 XLR/TRS combo inputs feature ultra-clean Zoom preamps, and the included X/Y microphones can capture up to a booming 135 dB SPL, equivalent to a jet taking off.

Record and stream

Use the USB-C port to connect to PC, Mac, iOS, and Android device to use the H6essential as a 32-bit float interface while simultaneously recording all 6 tracks to an SD card.

Pair with your iOS device

Use the BTA-1* Bluetooth Adapter to pair with your iOS device to remotely hit record, adjust your mix, view your waveforms, and change settings.

Bluetooth timecode

With the BTA-1* Bluetooth Adapter you can also pair with Bluetooth timecode devices for audio and video sync. *BTA-1 Adapter not included.

Specs

Input & output channels

Inputs
Mic capsule: 1
MIC/LINE (mono): 4

Outputs
LINE OUT: 1
Headphones: 1
Built-in speaker (mono): 1

INPUTS
XY mic: XYH-6e: 90O XY stereo format
Directionality: Unidirectional
Sensitivity: -42dB/1Pa at 1kHz
Maximum sound pressure input: 135 dB SPL

MIC/LINE (mono)
Connectors: 4 XLR/TRS combo jacks (XLR:2 HOT TRS:TIP HOT)
Input gain: Adjustment unnecessary (dual A/D converter circuits used)
Input impedance: MIC: 3.8 kO or more, LINE: 39 kO or more
Maximum input level: MIC: +4 dBu, LINE: +24 dBu
Phantom power: +48 V
Channel total: 32 mA or less
Equivalent input noise MIC: -120 dBu or less(IHF-A) @150 O input, LINE: -95 dBu or less(IHF-A) @600 O input

OUTPUTS

LINE OUT
Connector: Stereo mini jack
Maximum output level: +1 dBu
Output impedance: 110 O or less

Headphones
Connector: Stereo mini jack
Maximum output level: 20 mW + 20 mW(when 32 O load)
Output impedance: 10 O or less

Built-in speaker
Type: 20 mm x 30mm elliptical dynamic speaker
Effective maximum output: 250mW

RECORDER
Maximum simultaneous recording tracks: 8
Maximum simultaneous playback tracks: 6

Recording formats:
WAV
44.1/48/96 kHz,
32-bit float mono/stereo
BWF and iXML formats supported

Recording media: 4-32GB cards compatible with the microSDHC specification, 64GB-1TB cards compatible with the microSDXC specification

Display: 2.0-inch full-colour LCD 360 x 240

USB
Connector: USB Type-C - Use a USB cable that supports data transfer.
Audio Interface : USB 2.0 High Speed
Input and output channels: 6 in / 2 out (Multi), 2 in / 2 out (Stereo)
Sampling frequency: 44.1/48/96 kHz (AIF only), 44.1/48 kHz (AIF + onboard recording)
Bit depth: 24-bit, 32-bit float
File transfer: USB 2.0 High Speed

Remote

Dedicated wireless adapter: ZOOM BTA-1

Power

4 AA batteries: Alkaline, lithium or rechargeable NiMH batteries
AC Adapter: ZOOM AD-17 (DC 5 V/1 A) - USB bus power is supported.

Estimated continuous operation times using batteries: 2-track recording (XYH-6e)
Alkaline batteries: About 18 hours
NiMH batteries (1900 mAh): About 14.5 hours
Lithium batteries: About 30 hours

48 kHz/32-bit float with phantom power off, no headphones, no LINE OUT, no REMOTE, Power Saving on, Display Brightness Medium
These values are approximate.
Continuous battery operation times were determined using in-house testing methods.They will vary greatly according to use conditions.

Estimated continuous operation times using batteries: 6-track recording (XYH-6e and inputs 1-4)
Alkaline batteries: About 3.5 hours
NiMH batteries (1900 mAh): About 4 hours
Lithium batteries: About 9 hours
48 kHz/32-bit float with phantom power off, headphones used (33O load), no LINE OUT, no REMOTE, Power Saving on, Display Brightness Medium
These values are approximate.
Continuous battery operation times were determined using in-house testing methods.They will vary greatly according to use conditions.

Power consumption: 5 W maximum

Dimensions
Recorder: 78.1 mm (W) × 160.1 mm (D) × 42.8 mm (H)
XYH-6e: 69.1 mm (W) × 50.8 mm (D) × 43.0 mm (H)
Weight Recorder: 381 g (including batteries)
XYH-6e: 42 g
Note: 0 dBu = 0.775 Vrms

Notes: ***B-STOCK: Box opened, but product is in excellent condition and in perfect working order***


A characteristically unique take on mixing from Buchla, with six mono inputs and a built-in mic/guitar pre-amp. Each channel can be cued to a monitor mix, while the first and last channels also include voltage-controlled panning.

Supplier's Notes:
The Tiptop 207t is a modern reimagining of the classic Don Buchla 207 Mixer/Preamplifier from the 1970s 200 Series. This stereo mixer comes with a built-in preamp that allows you to boost external instruments and microphones, making it a versatile tool for any modular setup. The 207t also features a six-channel mixer with a variety of signal routing options, including the ability to route channels to the monitor and L&R signal outputs, with per-channel control over loudness and panning.

Each channel has a Mon switch that sends the channel's signal to the monitor outputs, which are always full-volume and summed to mono, making it useful for basic monitoring applications or rudimentary mixing. The Prog switch sends the signal to the L&R signal outputs, with loudness controlled by the Level Adjustment slider and panning determined by the Channel Assignment knobs. The first and sixth channels offer voltage control of panning; these channels are hard-panned when no CV is applied.

The preamp section features a 1/4" input and multiple gain settings, making it suitable for use with external line level instruments, electric guitars, or dynamic microphones. The continuous amplification control provides added flexibility for your audio needs. Finally, the Expansion In is a stereo input that sums to the left and right main outputs, which is great for chaining multiple 207t modules or adding another stereo source at the final output.

While the 207t's functionality may be simple, it is an essential part of any 200t system, serving as the glue that holds everything together. The Tiptop 207t is a fantastic mixer/preamp option that delivers quality sound and reliable performance.

Buchla 207t Features

Mixer/preamp module based on Don Buchla's original 207 design
Six-channel mixer with per-channel level control and panning
Voltage-controllable panning on channels 1 and 6
Manual panning on channels 2-4
Program switches can act as channel mutes for main outputs
Mon switches route signal (in mono) to Monitor output
Expansion input useful for stereo chaining and more
Re-designed preamp for high audio fidelity
Preamp suitable for use with external instruments, electric guitars, dynamic microphones, and more

Eurorack module
28hp wide

Notes: The OpticTone is a combination of a 12dB multi-mode Vactrol Filter and a Vactrol Voltage Controlled Amplifier.

It is a completely original circuit inspired by the singular nature of Vactrols and their fluid and natural character.

The Filter section provides the three fundamental filter types: Lowpass, Bandpass and Highpass.

A Resonance knob with voltage control input is available for improved modulation flexibility. The feedback knob interacts with the Resonance path, tempering it from creamy resonance to wacky self-oscillation.

Filter and VCA run in parallel, both are controlled by the Freq/Amp knob and it's associated voltage-control input. The combination of both signals can be crossfaded with a dedicated knob.

The Freq/Amp is also controlled with direct touch control on the panel via the 3 lines below the knob.

The filter frequency control can be inverted by the Inv Freq switch, providing the possibility to change the filter direction. This feature allows the filter to "close" when the VCA is "opening" or the other way around.

The Ping input allows to generate the well known vactrol filter percussive sounds if a gate or trigger signal is provided. The Ping frequency if controlled by the Freq/Amp knob, ranging from low kicks drums to high pitch bongos.

There is also a Drive knob to take care of your saturation needs. The Overdrive range is wide, from soft textural clipping to heavy distortion.

All voltage controlled inputs have an attenuator-inverter knob.

Features:

Vatrol based 12dB multi-mode Voltage Controlled Filter: Lowpass, Bandpass and Highpass.
Vactrol Based Voltage Controlled Amplifier.
Crossfade between VCF and VCA section.
Voltage controlled Resonance.
Ping Input for percussive sounds generation.
Cutoff Frequency polarity inversion switch. Doesn't change VCA polarity
Overdrive and Feedback controls.
Attenuator/inverter knobs on all voltage controlled inputs
Touch control over Frequency and Amplitude.


Specs:

Width: 10HP
Depth: 33mm
Power consumption: 55mA +12 / 55mA -12
Eurorack Format
Doepfer power connection

Notes: Record your voice, guitar, piano, synth, or any audio, and create great-sounding tracks with a plug-and-play bundle that does it all. For beginners, songwriters, content creators, and everyone in between, the MiniFuse Recording Pack gives you professional sound in a simple, fun, creative package - whatever your style.

Your recording all-in-one

Whether you're a beginner music maker, a content creator, a producer with limited space, or a musician on a budget, enjoy a pro-grade recording bundle for vocals, guitars, percussion, and more - without breaking the bank.

Plug-and-play interface

MiniFuse 2 gives you 2 audio inputs & outputs, MIDI for connecting synths & drum machines, and easy to use controls that work right out the box. Recording has never been so easy.

Make your voice heard

Capture your voice & instruments with supreme clarity without hassle. Follow the included step-by-step guide to connect your CM1 cardioid microphone and get recording - it even comes with a shockmount & pop filter to keep your recordings clean & noise-free.

Hear your sound come to life

Monitor your mix in studio-grade detail and comfortably smash out long sessions with the included EF1 closed-back monitoring headphones, great for production, live recording, and even just listening at home or on the move.

DAW music creation, your own way

Enjoy the most versatile & inspiring software bundle at this price point. From an introduction to an industry-standard DAW to a range of creative effects and audio enhancing tools, take your production to another level

Main Features

All-in-one audio interface recording bundle
Premium software bundle included
Analog Lab Intro with 500 vintage & modern keyboard presets
Rev PLATE-140 reverb
Pre 1973 vintage preamp
Delay TAPE-201 echo
Chorus JUN-6 analogue chorus
Ableton Live Lite

2 x combo Mic/Inst/Line XLR Input with 48V phantom power
2 x 1/4'' TRS balanced line outputs with volume control
1 x stereo headphones output with volume control
1 x 5-pin MIDI input & output
1 x USB2 type A hub (250mA max.)
1 x stereo virtual loopback channel
USB-C interface compatible with PC and Mac
Bus-powered

Microphone
Capsule: Condenser (Cardoid)
Sensitivity: -36 dB +3 dB (0 dB = 1 V/Pa at 1 kHz)
Frequency response: 20 Hz to 20kHz

Headphones
Type: Closed-back
Drive diameter: 40 mm

MiniFuse 2
2x Inputs
2x Outputs
1x Headphone
1x MIDI I/O

Subscriptions - Complimentary introductions to audio & mixing services:
Splice Creator Plan
Auto-Tune Unlimited

What's in the box

Box content:
MiniFuse 2 Unit
USB-A to USB-C cable
CM1 cardioid microphone with shockmount & pop filter
EF1 closed-back monitoring headphones with adapter
3m XLR cable

Platforms requirements

Windows
Win 10+ (64bit)
2.5 GHz CPU
4 GB RAM
2GB free hard disk space
OpenGL 2.0 compatible GPU

Apple
Mac OS 10.13+
2.5 GHz or Apple Silicon CPU
4 GB RAM
2GB free hard disk space
OpenGL 2.0 compatible GPU

Notes: The STEREO FX module brings hi-fi stereo effects into the Erica Synths Drum Series. Based on Erica Synths' new DSP engine, the module provides a wide range of custom delay and reverb effects. CV control over various parameters and the ability to save up to 10 presets will make this module an integral part of any performance rack.

Features

Hi-Fi stereo FX module
3 delay and 3 reverb effects
Tap and clock synchronization of delay time
Delay time divisions and multiplications in sync mode
10 preset patches
CV control over delay time, feedback, and preset selection
The FX is developed in collaboration with the Dutch company 112dB which offers some of the best-sounding VST instruments.

Technical specifications:

Audio input level: -5V - +5V
Delay time: 3ms - 3s
CV level (full span): -5 - +5V
Power consumption: +123mA, -40mA
Module width: 10HP
Module depth: 35mm

Notes: The ultimate companion for producers on the move - the UDG Ultimate Producer Backpack Trolley. This sleek and versatile backpack is designed to meet the demands of modern music producers and DJs, combining style, functionality, and durability in one package.

The Producer Backpack Trolley is more than just a bag; it's a travel companion designed to make your life easier while maintaining a sleek, professional look. Whether you're a DJ, music producer, or someone who needs a reliable, feature-packed backpack for travel, this is the perfect choice. Elevate your gear transportation experience with the ultimate in style and functionality. Get yours today!

Specifications

Colour: Black, Orange inside
Weight: 4,25 kg / 9.35 lbs
Outer Dimensions (W x H x D): 39.5 x 62.0 x 32.0 cm | 15.5 x 24.4 x 12.6 inch
Inner Dimensions (W x H x D): 35.0 x 45.5 x 15.5 cm | 13.8 x 17.9 x 6.1 inch
Material: Water Resistant Nylon 420D

Protection

Padded MIDI controller compartment
Inseparable wheel cover
Comfortable moisture absorbent shoulder straps
Ergonomic back padding provide exceptional comfort
Integrated with a TSA combination lock
Easy backpack to trolley mechanism

Extras

Multiple external pockets for accessories & smaller gear
Quick access top pocket
Top & side carry handles
Retractable handle with 2-stage trolley system
Smooth rolling in-line wheels with high quality in-line skate bearings

Fits

Main compartment fits up to 18.4" laptop.
Pioneer CDJ-3000, Ecler Warm4, Reloop RMX-95, Roland SPD-SX Pro, Ableton Push 3

Notes: The ZIO Analog Bass Preamp + DI is an ultra-low noise, all-analogue preamp and DI for bass guitar. The pedal offers maximum headroom and a simple but flexible set of tone shaping controls. ZIO Bass can be used as a direct input using the balanced XLR output for connection to a mixer or audio interface as well as with headphones through its dedicated headphone jack.

The ZIO Bass features a simple control panel. The OUTPUT knob offers +12db of additional boost plus a significant amount of cut. The BASS and FOCUS controls work best in tandem - use the BASS knob to increase low-end output and the FOCUS knob (which adjusts the cut-off point of a high-pass filter) to eliminated excessive lows and create added punch. The TREBLE knob boosts or cuts the high frequencies, providing enhanced articulation without adding harshness.

The GRIT toggle enables a mild distortion to mimic the transformer-style breakup from high-end bass amps. GRIT mode's gain level can be adjusted for more or less distortion with the GAIN control located on the side of the pedal. The SCOOP toggle engages a special midrange cut to clean up "muddy" mid-range frequencies. The SCOOP profile is based on the "Pultec Trick" - a setting commonly used with vintage Pultec Equalizers to add clarity.

The pedal has three outputs that can be used individually or simultaneously. The OUTPUT jack connects to an amplifier or pedalboard.

The DIRECT OUT is a balanced XLR output that sounds great running into a mixer or audio interface for recording or live sound applications. The HEADPHONE jack features a high dynamic range, low noise amplifier that is capable of driving low impedance studio headphones.

Notes: Dizygote is an A-side/B-side digital oscillator with a built-in envelope generator. The A-side builds harmonies with a square waveform and frequency modulation. the b-side distorts a sine waveform with phase modulation.

Inputs:

Trig - button and gate in to trigger oscillator amplitude envelopes
Switch - button and gate in for toggling between the a and b sides
Length - knob and CV in for changing the envelope length
Mod - knob and CV in for changing the phase and fm modulation amounts
Mfreq - knob and CV in for changing the phase and fm modulation frequencies
Freq - knob for setting the oscillator frequency
V/oct - voltage per octave CV for modulating the oscillator frequency

Outputs:

Out L and out R - audio output
Env - CV envelope out