搜索结果

Notes: Rigid, 2mm aluminium powder coated and 300mm wide studio cable holder can host over 80 studio cables in perfect order! Two screws for fixing the cable holder are included.

Notes: 3,5mm TRS to male DIN 5

150cm length

Notes: These knobs are custom made for AE modular; they fit perfectly on the shafts and can be added to all AE modules, no matter of which generation they are.

They are available in four different colors: red, blue, green and yellow.

Notes: These knobs are custom made for AE modular; they fit perfectly on the shafts and can be added to all AE modules, no matter of which generation they are.

They are available in four different colors: red, blue, green and yellow.

Notes: ZVERBZ is a collection of new stereo reverb algorithms for the Z-DSP. They range from typical reverbs to more complex effects that combine delay and pitch shifting with reverb. The effects are grouped by decades based on either the era an algorithm was introduced or the time when the effect was most popular. This variety of reverbs covers small to epic size spaces with the addition of shimmering, feedback tunneled pitch shifting, tape delay drivers, gated reverbs and a lot more. Analog clocking of the DSP chip and CV over the parameters enables even more experimentation. This is a collection inspired by the best from the past right at your fingertips.

Please note: The Z-DSP module is not included with this purchase- it is for demonstration purposes only.

Notes: Blank Panels help to keep your Rack clean and well organised.

These panels not only fill in empty spaces in your rack, but also protect the power distribution boards by keeping things from falling into your rack. You can also use them to gain more space between modules or to separate module groups visually.

Inspired by Lissajous Curves & Oscilloscope aesthetics.

Lissajous Curves are the shapes created when the x-coordinate of a curve is described by one sine wave, and the y-coordinate is described by another sine wave.

By adjusting the frequency (a,b) of each wave and other parameters, interesting patterns emerge. Using oscilloscopes and two signal generators it is possible to create them.

Notes: Blank Panels help to keep your Rack clean and well organised.

These panels not only fill in empty spaces in your rack, but also protect the power distribution boards by keeping things from falling into your rack. You can also use them to gain more space between modules or to separate module groups visually.

Inspired by Lissajous Curves & Oscilloscope aesthetics.

Lissajous Curves are the shapes created when the x-coordinate of a curve is described by one sine wave, and the y-coordinate is described by another sine wave.

By adjusting the frequency (a,b) of each wave and other parameters, interesting patterns emerge. Using oscilloscopes and two signal generators it is possible to create them.

Notes: Blank Panels help to keep your Rack clean and well organised.

These panels not only fill in empty spaces in your rack, but also protect the power distribution boards by keeping things from falling into your rack. You can also use them to gain more space between modules or to separate module groups visually.

Inspired by Lissajous Curves & Oscilloscope aesthetics.

Lissajous Curves are the shapes created when the x-coordinate of a curve is described by one sine wave, and the y-coordinate is described by another sine wave.

By adjusting the frequency (a,b) of each wave and other parameters, interesting patterns emerge. Using oscilloscopes and two signal generators it is possible to create them.

Notes: Banana cable for modular systems, as used by companies such as Buchla. The length is 12.7 centimeters.

Patch cable with banana plugs.

Length: 12.7 centimeters

Color: Violet

Notes: Banana cable for modular systems, as used by companies such as Buchla. The length is 76,2 centimeters.

Patch cable with banana plugs.

Length: 76,2 centimeters

Color: Blue

Notes: Meng Qi's Char is a unique passive signal multiple, allowing three-way stereo signal multing.

It features a keychain attachment for easy carrying.

Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.

Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.

Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.

Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.

Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.

Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.

Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.

Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.

Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.

Notes: Rack Screws - Tin of 30

These rack screws for Eurorack can be screwed by hand for quick changes, or use a standard screw driver.

Each Special Size M2.5 X 8mm stainless steel screw comes with a black nylon washer in a silver tin.

Notes: These knobs are custom made for AE modular; they fit perfectly on the shafts and can be added to all AE modules, no matter of which generation they are.

As of December 2020, all AE modules will be shipped with these knobs as standard.

Notes: This is a variant of the standard red/black racks for AE modular with wooden front and sides.

Same as with the standard cases, via a joint kit (not included) another case of this width (either one-row or two-row, standard or wooden type) can be attached at a free angle; the bus is connected via a short connector cable between both cases.

The sides, front and back are made of real-wood veneer covered MDF.

Notes: This is a variant of the standard red / black racks for AE modular with wooden front and sides.

Same as with the standard cases, via a joint kit (not included) another case of this width (either one-row or two-row, standard or wooden type) can be attached at a free angle; the bus is connected via a short connector cable between both cases.

The sides, front and back are made of real-wood veneer covered MDF.

Notes: This is a variant of the standard red/black racks for AE modular with wooden front and sides.

Same as with the standard cases, via a joint kit (not included) another case of this width (either one-row or two-row, standard or wooden type) can be attached at a free angle; the bus is connected via a short connector cable between both cases.

The sides, front and back are made of real-wood veneer covered MDF.

Please note: This rack does not include the Master or Power module. To connect the case to power you have the following options:

Connect the case to your system via the Hinge Kit 1 or 2 (only for cases newer than 2019)
Connect the case to your system via the Racklink Module (works for all cases)
Install the Master Module
Install the Power Module

Whichever option you decide on, you will also need to order and install 2x Bus Cables, but be careful to order the correct size! Standard Bus Cable for Standard Case size, etc.

Notes: This is a variant of the standard red/black racks for AE modular with wooden front and sides.

Same as with the standard cases, via a joint kit (not included) another case of this width (either one-row or two-row, standard or wooden type) can be attached at a free angle; the bus is connected via a short connector cable between both cases.

The sides, front and back are made of real-wood veneer covered MDF.

Please note: This rack does not include the Master or Power module. To connect the case to power you have the following options:

Connect the case to your system via the Hinge Kit 1 or 2 (only for cases newer than 2019)
Connect the case to your system via the Racklink Module (works for all cases)
Install the Master Module
Install the Power Module

Whichever option you decide on, you will also need to order and install 2x Bus Cables, but be careful to order the correct size! Standard Bus Cable for Standard Case size, etc.

Notes: This is a variant of the standard red/black racks for AE modular with wooden front and sides.

Same as with the standard cases, via a joint kit (not included) another case of this width (either one-row or two-row, standard or wooden type) can be attached at a free angle; the bus is connected via a short connector cable between both cases.

The sides, front and back are made of real-wood veneer covered MDF.

Please note: This rack does not include the Master or Power module. To connect the case to power you have the following options:

Connect the case to your system via the Hinge Kit 1 or 2 (only for cases newer than 2019)
Connect the case to your system via the Racklink Module (works for all cases)
Install the Master Module
Install the Power Module

Whichever option you decide on, you will also need to order and install 2x Bus Cables, but be careful to order the correct size! Standard Bus Cable for Standard Case size, etc.

Notes: Bus board to connect 14 modules

An assembled and tested bus board, 22 sockets, e.g. for customers who want to built their own case and need a bus board for A-100 modules, includes cables for connection to +/-12V power supply (4 wires with flat connectors on both ends, length about 30cm), but no mechanical parts (e.g. screws, spacers, nuts, washers).

In the new version of the A-100 bus board (labeled Version 6 / 2019) boxed pin headers are used which are equipped with a reverse protection (gap for the "nose" of the socket of the bus cable). When the bus cable coming from the module is connected to the boxed header in question the "nose" has to point to the right. The polarity of the cable is correct if the red wire of the bus cable then points to the bottom (to the continuous line labeled"RED WIRE" on the pc board). If this is not the case please do not connect the module to the bus board ! Otherwise both the module and the power supply (A-100PSU3) may be damaged ! In that case please contact the manufacturer of the module and ask for a suitable bus cable with the correct polarity of the connector.

The bus cables of original A-100 modules manufactured by Doepfer are equipped with suitable bus cables since 2012. Only for older A-100 modules manufactured before 2012 it may happen that the polarity of the 16 pin female connector of the bus cable is wrong (nose points to the left when red wire points to the bottom). This is because in the past unboxed pin headers were used and the position of the "nose" did not matter. In such a case please contact Doepfer or one of their dealers and order a suitable bus cable.

Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod64X Unpowered is 64HP with 2.16" (55mm) of available module depth. No power supply is included, you must supply your means of powering modules with a DIY power supply or a front-facing module such as the Row Power. Two holes on the rear face are plugged with removable plastic plugs, and can be used for DIY applications.

Pods are a perfect way to get started in Eurorack, or add a couple more modules to your monster system!

Made from 100% anodized aluminum, Pods are light, tough and perfect for on-the-go set ups. Mix and match your Pods with desktop synths, effect pedals, drum machines or any musical gear for a flexible modular system. Need to add another module? Just add a Pod! Need to pack light for a live set? Just grab the Pods you need and go!

Basic Features:

64 HP Eurorack modular space
Standard M3 threaded holes
100% lightweight anodized aluminum

Includes:

64HP Pod, black anodized aluminum
M3 x 8mm pan-head screws, stainless steel (20)
Adhesive rubber feet (4)
Unpowered: requires you to provide your own Eurorack power system
Exterior dimensions:
Width: 329.7mm (12.98")
Height: 159.5mm (6.28")
Depth: 57mm (2.24")
Interior dimensions:
Max module depth: 55mm (2.16")
Module width: 64HP
Weight:
0.42 kg = 14.9 oz

Notes: Blank panel, 4HP, constructed from anodised aluminium, black.

Notes: Blank panel, 8HP, constructed from anodised aluminium, black.

Notes: Bananuts are anodized aluminium custom minijack nuts, following Buchla/Serge colouring code: Blue, purple, red, orange, yellow, white, green and black. Perfect lovely thingies to pimp your modular, code your inputs and outputs with colours or just give a touch of beauty to your favourite gear!

Notes: Bananuts are anodized aluminium custom minijack nuts, following Buchla/Serge colouring code: Blue, purple, red, orange, yellow, white, green and black. Perfect lovely thingies to pimp your modular, code your inputs and outputs with colours or just give a touch of beauty to your favourite gear!

Notes: Bananuts are anodized aluminium custom minijack nuts, following Buchla/Serge colouring code: Blue, purple, red, orange, yellow, white, green and black. Perfect lovely thingies to pimp your modular, code your inputs and outputs with colours or just give a touch of beauty to your favourite gear!

Notes: Bananuts are anodized aluminium custom minijack nuts, following Buchla/Serge colouring code: Blue, purple, red, orange, yellow, white, green and black. Perfect lovely thingies to pimp your modular, code your inputs and outputs with colours or just give a touch of beauty to your favourite gear!

Notes: Bananuts are anodized aluminium custom minijack nuts, following Buchla/Serge colouring code: Blue, purple, red, orange, yellow, white, green and black. Perfect lovely thingies to pimp your modular, code your inputs and outputs with colours or just give a touch of beauty to your favourite gear!

Notes: Bananuts are anodized aluminium custom minijack nuts, following Buchla/Serge colouring code: Blue, purple, red, orange, yellow, white, green and black. Perfect lovely thingies to pimp your modular, code your inputs and outputs with colours or just give a touch of beauty to your favourite gear!

Notes: Custom wrench for 3.5mm jacks, designed for Bananuts or other slotted round 3.5mm nuts.

Notes: The 2-row rack for AE modular is 16 units wide with 2 rows; the MASTER module consumes 2 units so you have 30U remaining for other modules.

Via a joint kit (not included) another case of this width (either one-row or two-row) can be attached at a free angle; the bus is connected via a short connector cable between both cases.

The sides are made of red acrylic, all other parts are of wood fibre board (MDF), black painted.

Dimensions: 41.3 x 21.7 x 4.5 cm (width x depth x height)

Notes: The 1-row rack for AE modular is 16 units wide; two of them are used by the MASTER module so you have 14U remaining for other modules.

Via a joint kit (not included) another case of this width (either one-row or two-row) can be attached at a free angle; the bus is connected via a short connector cable between both cases.

The sides are made of red acrylic, all other parts are of wood fibre board (MDF), black painted.

Dimensions:41.3 x 11.2 x 4.5 cm (width x depth x height)

Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod20 is 20HP with 1.34" (34mm) of available module depth. The built-in power supply has two power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.

Pods require a power brick. If you already have a powered Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain powered Pods.

The Pod20 includes ten (10) M3x8mm stainless steel screws and is compatible with M3 Knurlies.

Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod26 is 26HP with 1.34" (34mm) of available module depth. The built-in power supply has two power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.

Pods require a power brick. If you already have a powered Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain powered Pods.

The Pod26 includes ten (10) M3x8mm stainless steel screws and is compatible with M3 Knurlies.

Notes: Small desktop enclosure for Eurorack modules with 42 HP space and a maximum depth of 32mm. A relatively strong power solution with an external power supply and an on/off switch located at the case is included.

The power supply provides:

- 850 mA at +12V
- 850mA at -12V
- 500mA at +5V

The power distribution has 14 connectors and the case can house exactly fourteen modules from Erica's Pico Series.

Notes: Mariana Trench is an FDN card for the Z-DSP. Feedback Delay Networks (FDNs) are built around multiple delays which are connected to their inputs thanks to a feedback matrix designed for its stability and lossless properties. FDN can mimic the recursive process of sound waves bouncing back and forth in an acoustic space. They were first suggested for artificial reverberation by Michael Gerzon (1971) and later John Stautner and Miller Puckette (1982) introduced four-channel FDN reverberator with general stability conditions.

FDN can also be used as a special case of digital waveguides, they can be tuned, or also used as complex delays. The Mariana Trench Z-DSP cartridge is designed to explore these more unusual sides of the FDN algorithms. Mariana Trench Z-DSP cartridge is designed by Christophe Duquesne Anckorage - Haken Audio developement team - La Voix du Luthier.

Notes: With Mantis, Tiptop took their years of experience with Eurorack to create a low-cost case that makes the Eurorack modular synthesizer look, work, and feel like a professional instrument. Mantis is an instrument that is at home on stage, touring, or in the center of the studio.

Mantis has two rows of 104HP for you to rack your modules. It comes fully powered and assembled, just drop in your modules and play.

Using its sophisticated leg mechanism, you can set it to three different positions: 0, 45, and 90 degrees.

Power Power and more Power! With Mantis, say bye-bye to the tedious, never-ending calculation of current consumption for the i12V power. Mantis comes with a juicy Zeus power supply that delivers plenty of power both now and for the future.

Mantis is beautiful and the color contrast between legs and body gives it its identity. Legs are offered in 4 different colors so anyone can find the right look.

Mantis comes with real Z-Rails made according to Eurorack enclosure standards. No sliding nuts or wrong spacing! It also has keyed power connectors to help protect your modules from damage from plugging the power in in reverse.

Using the optional bracket accessory Mantis can be doubled up to 416HP! Multiply your Mantis and watch your studio setup grow...

Weighing only 3kg/6.5lb, Mantis is so light, traveling has never been so relaxed.

The Dual Mantis Studio Brackets pair lets you connect two Mantis together in a robust and elegant solution. This setup is fixed and is recommend mainly for studio use. The brackets are cut precisely by laser from a sturdy metal and then coated twice for a nice smooth finish that matches the Mantis light gray color. They come with sixteen screws and special washers that help hold the screw in place during assembly and keep a tiny gap between the brackets and the Mantis. Installation is fairly simple and takes about 30 minutes to complete.

***UPDATE - MAY 2021 ***
As of May 2021, all Mantis cases shipped have a small update to the design. The connector for SyncBus is no longer included. This connector was never used as Tiptop didn't develop the cable for it, and the connector is no longer in production by the manufacturer so it was removed. The Mantis still has the same power supply and functions as before.

Notes: Desktop Eurorack moduile case 3U - 104HP with power supply on the left side.

Plexiglas side panels 5mm thick.

Aluminium chassis.

6cm deep, but only 4cm deep all along the 5HP of the power supply. Check your modules before!

Tech specs:
- Width : 104HP
- Depth : 6cm
- Depth all along the 5HP of the power supply : 4cm
- Current Consumption : +12V : 2.4A ; -12V : 1.2A ; +5V : 0.5A

Notes: Large sized spring reverb tank, Accutronics 9BB2C1B with 3×2 springs and medium decay (1.75 - 3 seconds).

Notes: TPS80W Triple Power Supply - TYPE A

The TPS80W is a high power, super efficient and low noise studio grade power system for your Eurorack Modular. We carefully designed this power supply to perform optimally with even the most demanding, noisy and power hungry modules in your rig.

Notes: This is 40 cm (15.7 inch) long cable for connecting the DROID controllers controllers to your master. Its main purpose is to separate the controllers from the master at a longer distance.

You also can use this cable for connecting two of Der Mann Mit Der Maschine's multiples into a CV bus.

Notes: ALM Eurorack cases are available in a range of sizes all including an integrated powered bus boards.

The cases all feature anodised aluminium construction, an on/off switch, rubber feet, and high quality switched powered bus boards with numerous keyed headers and ample power capacity.

These are simple and compact Eurorack cases, perfect for small, focused systems, taking along on travels, or as a tabletop addition to a larger setup.

Cases are available in 4 sizes; 3U 84HP / 6U 84HP / 3U 52HP / 6U 52HP sizes. They all offer 1 Amp on both the -12V and +12V rails per row.

Great modern cases

The ALM powered Eurorack case was originally designed for the System Coupe. Wider interest has seen it evolve into a range of different sized cases being made available by themselves.

A fixed solid bus board provides quality ample power and plentiful keyed power connectors. The shielded DC/DC power converter is low noise and includes overload and short circuit protection. Fixed, quality mounting rails are used over sometimes frustrating sliding nuts. The case has a great looking all anodised aluminium construction that is both strong and light.

The case proportions are designed to look great on a table or desk (not too deep, just enough) and also be easy to fit in a bag and transport.

Decksaver case covers are available currently for the 3U/84HP, 6U/52HP, and 6U/84HP cases.

6U / 52 HP

Provides up to 1 Amp power on each -12V & +12V rails.
Connections for up to 9 modules on busboard, with additional 'flying bus board' included that adds up to 12 connectors.
Includes 2 Amp power 'brick'