搜索结果

Notes: ***B-STOCK: Box damaged, product in perfect working order***


A few years ago ZVEX Effects released the Candela Vibrophase, a candle-powered vibrato/phaser machined from solid brass and glass that used a mix of 1800s technology (a Sterling heat engine) and 60s/70s audio circuitry to create a lovely swirling effect. After numerous requests to put that sound into a guitar pedal, they came up with a way of dramatically broadening the spectrum of textures available using the original circuitry from the Candela.

It's presented to you here as the Vibrophase, a five-knob four-stage phaser that creates phase and vibrato nuances never heard before. Five knobs! Count 'em! Speed sweeps from maddeningly slow to puppy dog flippy, vibrato/phase sweeps from, erm, you'll figure that out, feedback sends the output back through the phaser again to raise intensity, and there are controls for the top end and bottom end of the sweep so you can completely tailor the sound to your song.

Notes: A few years ago ZVEX Effects released the Candela Vibrophase, a candle-powered vibrato/phaser machined from solid brass and glass that used a mix of 1800s technology (a Sterling heat engine) and 60s/70s audio circuitry to create a lovely swirling effect. After numerous requests to put that sound into a guitar pedal, they came up with a way of dramatically broadening the spectrum of textures available using the original circuitry from the Candela.

It's presented to you here as the Vibrophase, a five-knob four-stage phaser that creates phase and vibrato nuances never heard before. Five knobs! Count 'em! Speed sweeps from maddeningly slow to puppy dog flippy, vibrato/phase sweeps from, erm, you'll figure that out, feedback sends the output back through the phaser again to raise intensity, and there are controls for the top end and bottom end of the sweep so you can completely tailor the sound to your song.

Notes: A wah-wah pedal with no rocker pot to wear out, it uses a proximity sensing radio transmitter so you can achieve super fast wah action and chewy sounds (pulling your foot quickly away), and it even has a Super Hard On built in so you can drive it to any volume you want.

Power supply is not included.

*For audio demo, please visit - https://soundcloud.com/zvex-effects

Notes: The Super Hard On, or 'SHO' as we fondly refer to it, is an ultra-transparent boost that goes from unity gain to a whooping 60 times the original size (watch out!), while adding a delightful high-end clarity with its 5 million ohm input impedance.

Power supply is not included.

*For audio demo, please visit - https://soundcloud.com/zvex-effects

Notes: The Super Duper 2-IN-1 has two of our infamous Super Hard Ons in one small box, plus a Master volume control that lets you use it as an overdrive/distortion with any input volume. The two channels can give any amount of gain, from a soft bluesy boost in two stages, to a crunchy rock level, to a wild sustaining beast.

Power supply is not included.

*For audio demo, please visit - https://soundcloud.com/zvex-effects

Notes: The older brother of the Fuzz Factory has a theremin-like antenna that lets you adjust one of the knobs (STAB) by moving your foot or hand close to the copper plate, making it a big favorite of experimental noise fans, with its varying oscillation pitch and strange fuzz guitar interactions.

Power supply is not included.

*For audio demo, please visit - https://soundcloud.com/zvex-effects

Notes: Packed with knobs that let you control everything from tight, radically fuzzy sounds that gate off instantly when you stop playing, to intermodulating oscillations that fight for control of your guitar as your notes decay, to shortwave radio sounds, ripping velcro and octave-like fuzz. Now includes an on/off LED and DC power jack!

Power supply is not included.

*For audio demo, please visit - https://soundcloud.com/zvex-effects

Notes: A version of the Fuzz Factory. This variation features a three position mini toggle switch. Setting 1 is a standard Fuzz Factory, settings 2 and 3 introduce "low" and "lower" frequencies to manipulate, oscillate, and mutate as you like. The Fat Fuzz Factory sounds fantastic on both guitar and bass!

Power supply is not included.

*For audio demo, please visit - https://soundcloud.com/zvex-effects

Notes: The heaviest-sounding pedal in the ZVEX lineup, the BOM has a massive amount of distortion with great thump and excellent tone control, and includes a very effective noise-silencing gate feature which can be turned off and on with a footswitch. Gain adjusts from hard to harder.

Power supply is not included.

*For audio demo, please visit - https://soundcloud.com/zvex-effects

Notes: The Silicon Fuzz Factory contains carefully selected silicon transistors that preserve the classic texture of the original germanium Fuzz Factory while providing temperature stabilization. This means that it can be used in very hot situations such as sunny outdoor stages and under hot lights where germanium fuzzes can change texture as their gain climbs wildly.

Packed with knobs that let you control everything from tight, radically fuzzy sounds that gate off instantly when you stop playing, to intermodulating oscillations that fight for control of your guitar as your notes decay, to shortwave radio sounds, ripping velcro and octave-like fuzz.

Notes: The Zorx 1U SILENCER is a clickless 20 HP 4 channel performance silencing module that lets you manually switch each channel on and off, thereby muting it, with latching or momentarily capabilities. There is also a MIX OUT that sums all of the SILENCER's outputs into a single mono output. A connector cable [included] can be connected from the rear of the Zorx 1U CV Bus to the rear of the SILENCER which will take the last four outputs of the Zorx 1U CV Bus and duplicate them, normalling them to the corresponding inputs of the SILENCER. Illuminated numbered dots correspond to the 4 channels of the 1U CV Bus for easy recognition.

The SILENCER can be used as a 4-channel on/off/(on) performance switch, a 4-channel audio or CV mixer, or a combination of the two while having control of which channels you want in the final mix.

The SILENCER consumes +12V 40mA and -12V 40mA and has a depth of 40mm.

Faceplate is black matte with copper.

Notes: Portable recording made with musicians in mind, the R4 records up to four tracks in 32-bit float resolution, with on-board EQ and effects, amp simulation and the option to bounce recordings down then overdub.

Supplier's Notes:
The Little Recorder For Big Ideas

Introducing the Zoom R4 MultiTrak

Designed By Musicians

All of our engineers are musicians and they designed the R4 to empower musicians to explore big ideas. With a unique dedicated 'bounce track' and 32-bit float recording, the R4 is perfect for capturing your most ambitious compositions.

Record. Bounce. Repeat.

With the R4, you can record up to four tracks, mix and then bounce them to the dedicated 'bounce track.' This lets you free up additional tracks to keep adding layers.

You can choose to do a 'quick' bounce or mix and bounce in real time.

The R4 also allows you to 'undo' your last bounce, if you're not satisfied with the results.

32-Bit Float Recording

The R4 captures perfect audio with every take, without the need to set gain.

Combo Inputs

The R4 has 2 XLR/TS combo inputs with legendary Zoom preamps. You can plug in microphones, instruments, keyboards, and more.

Track Effects

Each track features a 3-band EQ, pan, echo, and reverb to refine your mix.

Input Effects

Apply effects to input A such as amp simulations, delays, distortions and more.

Built-In Microphone

The R4 features a high-quality built-in microphone, perfect for acoustic guitars, vocals, or capturing a quick reference recording.

Much More Than A Metronome

The R4 has a rhythm section preloaded with over 80 different drum patterns to play along with featuring genres such as rock, hip hop, funk, heavy metal, and more.

Every Take Is Saved

Tracks that you record are automatically saved individually, even after they have been bounced.

32-Bit Float Audio Interface

The R4 is also a powerful 2-in/ 2-out USB audio interface with 32-bit float technology. Connect it to either your computer or smartphone.

Control and Create

With a fader for each track and dedicated hardware buttons for the most used functions, you won't need to menu dive to record your music.

Powered For Your Ideas

The R4 can be powered by 4 AA Batteries, or through its USB-C port.

Specs

Inputs/outputs
Inputs: Built-in mic (mono): 1
XLR/TS inputs (mono): 2
Output: Headphones: 1

Inputs
XLR/TRS inputs:
Connectors: 2 XLR/TRS combo jacks (Balanced, XLR: 2 HOT)
Input gain: No adjustment required (dual A/D converter circuit used)
Input impedance XLR: 2.3 kO; TS: 1 MO
Maximum input level: XLR: +4 dBu, TS: +10 dBu
Phantom power: +48 V (switchable separately for INPUTS A and B)
Equivalent input noise: XLR: -120 dBu or less (IHF-A); TS: -107 dBu or less (IHF-A)
Frequency response: XLR: -0.5 /+0.0 dB : 20 Hz - 20 kHz; TS: -0.2 /+0.0 dB : 20 Hz - 20 kHz

Built-in mic input
Directionality: Omnidirectional
Input gain: No adjustment required (dual A/D converter circuit used)
Maximum sound pressure input:
115 dB SPL
Output

Headphone

Connector: 1 stereo 3.5mm mini jack
Output impedance: 10 O
Maximum output level: 20 mW + 20 mW (into 32O load)

Recorder

Maximum simultaneous recording tracks: 2
Recording format: WAV: 48kHz, 32-bit float, mono
Recording media: Cards compatible with microSDHC specifications 4 GB - 32 GB; Cards compatible with microSDXC specifications 64 GB - 1 TB

Display: 2" full-colour LCD (240 × 320)

USB

Connector: USB Type-C
Note: Use a USB cable that supports data transfer. USB bus power is supported.
Audio interface function
Class: USB 2.0 High Speed
Sampling frequency: 48 kHz
Bit rate: 24-bit/32-bit float
Input / output channels: 2 in/2 out
Mass storage function: USB2.0 High Speed

Power supply

Batteries: 4 AA (alkaline, lithium, or rechargeable NiMH)
AC adapter: ZOOM AD-17 (5V/1.0A)
* USB bus power is supported.
Estimated continuous operation time using batteries

Alkaline batteries: about 7 hours
NiMH batteries (1900 mAh): about 6 hours
Lithium batteries: about 14 hours
* Use conditions: Recording 1 track, playing 1 track, phantom power off, headphones into 32O load, power saving on
* The above values are approximate. * Continuous battery operation times were determined using in-house testing methods. They will vary greatly according to use conditions.

Power consumption: 5 W
External dimensions: 74 mm (W) × 138 mm (D) × 36 mm (H)
Weight (including batteries): 287 g
Note: 0 dBu = 0.775 Vrms

Notes: One Small Stomp For Man - One Giant Leap For Chorus, Delays & Reverbs

The Zoom MS-70CDR+: Your New Modulation Station

The MS-70CDR+ gives musicians 149 spatial effects ranging from lush choruses to crystal-clear delays to atmospheric reverbs. This single stompbox can shape your tone and provide endless depth and textures.

A Deep Dive into Chorus, Delays, Reverbs & More

Chorus - 43 different chorus and modulation effects that add depth and motion to your sound including phasing, flanging, tremolo, vibrato, detuning, and pitch shifting.

Delays - Featuring 29 mono and stereo delays, with delay times of up to 4 seconds. Everything from reverse and multi-tap to pitch-shifted and self-oscillating delays.

Reverbs - 33 sophisticated studio-quality effects. From spring and plate reverbs to giant hall and arena reverbs.

Dynamics / Filters - Round out your sound with 44 dynamics and filters such as EQ's, compression, noise reduction, and special effects.

Expanded Controls

The MS-70CDR+ offers expansive parameters for each effect, allowing you to dive deep into tweaking your tone.

Define Your Sound
Use a singular effect or up to 6 simultaneously to create unique tones. Save your creations in one of the 100 patch slots or use the 80 preset patches as inspiration to get you started.

Next Generation Circuitry

Newly designed analogue circuits provide more fidelity for improved sound quality. The flat phase response provides sharp attacks and clean low end.

Everything's Better in Stereo.

The MS-70CDR+ has stereo input jacks that accept signals from passive and active guitars, as well as line-level devices such as synthesizers. Its dual line-level output jacks enable you to record and perform with the MS-70CDR+'s 58 stereo effects.

Soundscapes Are Key

For musicians looking to add lush layers to their synths or keyboards, the MS-70CDR+ provides high-quality effects that are perfect for adding atmosphere and character to your sound.

Change Patches With MIDI

With USB MIDI, you can connect the MS-70CDR+ to other MIDI gear to remotely trigger patch changes.

Enhanced Navigation

Cross Key Switches

The Cross Key switches allow you to instantly switch between effects and patches with a tap of your foot.

Control Knobs

Adjusting and tweaking parameters for each effect can be done with the four encoder knobs.

Colour Coded LCD Screen

The LCD backlight changes colour to make it easier to distinguish each category of effects while scrolling.

Sturdy Build

The MS-70CDR+ is built around a metal frame designed to withstand the rigors of live performances.

Power Options

The MS-70CDR+ runs on 2 AA batteries, USB power or AC power.

Tune-Up

The onboard chromatic tuner uses the colour backlight to give visual feedback to help you tune quickly and accurately. It supports all standard guitar tunings as well as open & drop tunings.

Handy Guitar Lab

With a growing library of patches and effects, guitarists can continue to expand their sound with the Handy Guitar Lab for MS-70CDR+ app for iOS. *Coming Soon to the App Store.

Technical Specifications

Maximum number of simultaneous effects: 6 effects
User patch memories: 100
Sampling frequency: 44.1 kHz
A/D conversion: 24-bit 128× oversampling
D/A conversion: 24-bit 128× oversampling
Signal processing: 32-bit
Frequency response: 20 Hz - 20 kHz (+0.5 dB/-0.5 dB) (when 10kO load)
Display: 160×128 dot-matrix LCD

Inputs L/R
Standard mono phone jacks
Rated input level: -20 dBu
Input impedance (line): 470 kO
Input S/N: 122 dB

Outputs L/R
Standard mono phone jacks
Maximum output level: +7.2 dBu (when output impedance 10 kO or higher)
Noise floor (residual noise) L/R: -100 dBu

Power
AC adapter: 9V DC 500mA centre negative (ZOOM AD-16 optional)
2 AA batteries (alkaline, lithium or rechargeable NiMH batteries)
Estimated operation time using batteries
These values are approximate. Battery operation times were determined using in-house testing methods. They will vary greatly according to use conditions.
Alkaline batteries: about 7 hours (about 5 hours using stereo input)
NiMH batteries (1900 mAh): about 6.5 hours (about 5 hours using stereo input)
Lithium batteries: about 14 hours (about 10 hours using stereo input)

USB Port:
USB 2.0 Type-C / Supported cable type: Type-C
Handy Guitar Lab: USB 1.1 Full Speed
Use a USB cable that supports data transfer. USB bus power is supported.

Dimensions: 133 mm (D) × 79 mm (W) × 61 mm (H)
Weight: 368 g (excluding batteries) / 415 g (including batteries)
Note: 0 dBu = 0.775 V

Notes: The new lightweight stereo in-camera recorder that records in 32-bit float to ensure perfectly modulated audio on every recording. The M3 has a line output to send audio directly to the camera input and has a selectable mono/90-/120- recording pattern.

Stereo shotgun microphone with stereo recorder
High level stability (133dB SPL)
Support for mid-side (M/S) raw recording
Shock mount for camera included
REC/ PLAY button and mono/90/120
2xAA battery operation (up to 12 hours)
Perfect sound with every picture. In one take.

The M3 MicTrak offers filmmakers the ability to enhance their content with pristine sound quality. Designed to be mounted on a camera, the stereo microphone with built-in recorder records every sonic nuance with 32-bit float technology.

32-bit float recording

The M3 records clipping-free audio at all times. Thanks to 32-bit float recording, no equalisation is necessary. Whether it's dialogue, sound effects or ambience in outdoor recordings, you'll always get a perfect recording.

Absolutely ready at all times

The specially designed elastic mount keeps weight to a minimum and ensures minimal transmission of handheld noise.

Mono and stereo modes

Switch easily between mono and stereo modes. Mono mode is ideal for dialogue recording. 90O provides accurate, transparent stereo recording. 120O stands for a generous stereo pick-up, which is especially recommended for atmosphere or sound effects.

More flexibility in post-production

The M3 saves a backup file in mid-side RAW format at any time, giving you the flexibility to adjust the stereo width of the recording in post-production.

Backup for your recordings

Use the 3.5mm stereo output to connect the M3 to your camera and record a backup there. This is especially useful for synchronising audio to a video.

Effectiveness in post-production

With the M3 Edit and Play software, you can adjust the stereo width of your recordings and normalise your files to prepare them for dubbing and post-production.

USB Mic

Connect the USB-C port to a PC or Mac to use the M3 as a USB microphone for streaming or recording.

Monitoring

Listen to your recordings via the 3.5mm headphone output.

Power supply

Power the M3 on long production days with up to 12 hours of recording from two Type AA batteries.

Storage

Record onto SDXC cards with a capacity of up to 1 TB.

Tech specs
USB-C connector (2.0)
USB bus power supported
Recording media
4GB-32GB microSDHC cards
64GB-1TB microSDXC cards
Headphone jack
12 hours battery life
Recording format: 44.1/48kHz, 32-bit float (48kHz in audio interface mode), mono/stereo BWF and iXML

Whats in the box

Quick Guide
Windscreen
3.5 mm mini-jack coiled cable
Elastic microphone holder

Notes: ZOOM H6 BLACK HANDY RECORDER
The H6 is the ultimate portable recorder. With its advanced preamps and interchangeable capsules, the H6 delivers unmatched versatility and award-winning quality.

FEATURES
Interchangeable input capsules
Six-track simultaneous recording
Four mic/line inputs with XLR/TRS combo connectors
Gain control knobs and -20dB pads for each input
Supplied XYH-6 X/Y capsule provides secondary input via a stereo ?" Mic/Line In mini phone jack
Phantom power for all main inputs: +12/+24/+48V
Large full-color, angled LCD display
Records directly to SD, SDHC and SDXC cards up to 128GB
Up to 24-bit /96kHz audio in BWF-compliant WAV or a variety of MP3 formats
Auto-record, Pre-record and Backup-record functions mean that you'll never miss that perfect take
Built-in effects, including low-cut filtering, compression, and limiting
Multichannel and stereo USB audio interface for PC/Mac/iPad
Accepts standard AA alkaline or NiMH rechargeable batteries
Over 20 hours of operation with 4 AA alkaline batteries (not included in the scope of delivery)

PODCAST ANYWHERE
From the studio to remote locations, podcasts are produced everywhere. With inputs for every guest, the battery-powered H6 is a complete portable podcasting solution.

UNLIMITED STUDIO TIME
The H6 is your personal music studio 24/7. With up to six* discrete line-level / mic-level inputs, plus the ability to overdub and more, the H6 provides the road from a great idea to the perfect track. *Optional EXH-6 mic capsule required

SOUND FOR EVERY SCENE
Featuring interchangeable mic capsules, four combo inputs and six tracks of quality recording, the H6 is ready to record on any set and in any scene the director throws at you.

FROM SAMPLING TO SOUND DESIGN
Whether you're a musician creating your own unique masterpiece, or a sound designer looking for that perfect sound effect, the H6 will become your most trusted companion.

Specifications
In- and outputs
Analog outputs2
Analog inputs4
Microphone inputs4
Digital outputsNone
Digital inputsNone
Headphone outputs1
Tracks
Number of tracks6
Memory
Storage mediaSD / SDHC / SDXC Card
Maximum capacity storage media128 GB
Other
Max. Sampling rate96 kHz
Options
EffectsYes
Voice GuideNo
Battery mode possibleYes
TouchscreenNo
USBYes
DisplayYes
built-in microphoneYes
LimiterYes
Internal rechargeable batteryNo
built-in speakerYes
Auto-GainNo
Phantom power supplyYes

Notes: Tried-and-tested portable recording solution from Zoom, featuring interchangeable input capsules to suit a range of purposes, from podcasts to music. High quality and compact size.

Supplier's Notes:
Six interchangeable input capsules make the ZOOM H6 the ultimate recorder for film, video, podcast and music. Its advanced preamps make it the best-sounding one, too. Unmatched abilities. Award-winning quality. Meet the H6 Handy Recorder.

The H6 is a podcaster's dream with inputs for every guest and phantom power for every mic. Easily monitor your levels on the H6's crisp, color LCD screen, and use its individual gain knobs to control the levels of each input. The H6 is intuitive and easy to use.

Featuring interchangeable mic capsules, 4 combo inputs and 6 tracks of quality recording, the H6 is ready to record on any set and in any scene the director throws at you.

Say hello to your personal multitrack recording studio. With up to six* discrete line- or mic-level inputs and the ability to overdub, the road from great idea to perfect track just got a lot shorter.

*Optional EXH-6 mic capsule required.

The H6 is always listening, saving the two seconds^ of audio captured right before you hit RECORD.
^One second when recording at 96k.

The Auto-Record function allow the H6 to automatically start and stop recording at predefined sound levels.

The H6 offers four XLR/TRS combo jacks with dedicated pad switches and gain control for distortion-free capturing. The H6 features two 1/8" outputs, a stereo line out as well as a headphone out with dedicated volume control.

The H6's USB port enables it to serve as a multi-channel audio interface for your laptop or iOS tablet.

When the H6 is set to "Stereo Mix" in the USB menu, it acts as a 2-input/2-output interface; when set to "Multi Track," it acts as a 6-input/2-output interface.

Record continuously for over 20 hours with just 4 AA batteries or extend your recording time indefinitely with the optional AD-17 AC adapter.

The H6 can record up to six monophonic WAV files (or up to three stereo files) in any of the following formats:
44.1kHz/16-bit
44.1kHz/24-bit
48kHz/16-bit
48lHz/24-bit
96kHz/16-bit
96kHz/24-bit

The Zoom H6 comes with free download licenses for Steinberg's Cubase LE music production software and WaveLab LE audio editing software, enabling you to not only capture, but create.

Here's what comes included with the H6:

Quick guide
XYH-6 X/Y mic capsule
AA size (LR6) battery x 4
Cubase LE & Wavelab LE Software

Notes: Four tracks of simultaneous recording and interchangeable mic capsules make the H5 flexible and powerful enough to meet the evolving needs of today's creators.

The design of the XYH-5 mic capsule allows the H5 to handle up to 140dB SPL- equivalent to the sound of a jet aircraft from less than 200 feet away. And to keep your levels under control, the H5 offers compression limiting.

The H5's rubberized housing and shock-mounted microphones minimize vibration and handling noise, while a low-cut filter helps to eliminate wind noise and other kinds of low frequency rumble.

The H5 utilizes the same high-quality, low-noise preamps as Zoom's H6, ensuring great-sounding recordings in all sonic environments.

The Pre-Record function captures and saves two seconds before you hit Record- perfect for unexpected starts.

The Auto-Record function allows the H5 to automatically start and stop recording at predefined sound levels.

The H5's Backup-Record* function automatically records a duplicate set of L/R tracks with 12db less input gain. The audio safety net helps to protect your recordings.

*44.1 and 48kHz WAV files only.

Inputs and Outputs
Ins: The H5'sXLR/TRS combo inputs can handle both mic- and line-level signals for microphones, wireless receivers, mixers, keyboards and more. Each input has a dedicated gain control knob. The supplied XYH-5 capsule also provides an additional mic/line input via a 1/8" mini phone jack.
Outs: A Line Out with adjustable volume allows you to send audio from the H5 to the input of a camera or other device without the need for an attenuator cable. IN addition, there's a separate headphone output with a dedicated volume control. You can use both outputs simultaneously to route audio to your DSLE while monitoring with headphones.

Record continuously for over 15 hours with just 2 AA batteries or extend your recording time infinitely with the optional AD-17 AC adapter. The H5 can record up to six monophonic WAV files (or up to three stereo files) in any of the following formats: 44.1kHz/16-bit, 44.1kHz/24-bit, 48kHz/16-bit, 48kHz/24-bit, 96kHz/16-bit, 96kHz/24-bit.

Included with the H5:
Operation manual
XYH-5 X/Y mic capsule
AA size (LR6) battery x2
USB cable
Foam windscreen
Case
Steinberg WaveLab LE software download
Steinberg Cubase LE software download

SPECS:

General
RECORDING MEDIA: SD card: 16MB to 2GB , SDHC card: 4GB to 32GB
DISPLAY: Backlit LCD (128 x 64 pixels)

Inputs:
INPUTS L/R [XYH-5 X/Y MIC]: Mic type: Unidirectional
Sensitivity: -45 dB, 1 kHz at 1 Pa
Input gain: -8 to 52 dB
Max sound pressure input: 140 dB SPL
PHONE OUT: Connector: 1/8" stereo mini jack
Output Level: 20 mW +20 mW into 32 O load
BUILT-IN SPEAKER: 400mw 8 O mono

Recording Formats

STEREO MODE: WAV (BWF-compliant)
Sampling frequency: 44.1/48/96 kHz
Bit rate: 16/24 (Stereo)
Maximum simultaneous recording tracks: 2
MP3
Sampling frequency: 44.1kHz
Bit rate: 48/56/64/80/96/112/32/160/192/224/256/320kbps
MULTITRACK MODE: WAV (BWF-compliant)
Sampling frequency: 44.1/48 kHz
Bit rate: 16/24 (Mono/Stereo)
Maximum simultaneous recording tracks: 6 (L/R + INPUT 1/2 + L/R backup)

USB
MASS STORAGE CLASS OPERATION: Class: USB 2.0 High Speed
AUDIO INTERFACE OPERATION: MULTITRACK MODE: Class: USB 2.0 High Speed
Sampling frequency: 44.1/48kHz
Bit rate: 16/24 bit
Inputs / Outputs: 4 / 2
AUDIO INTERFACE OPERATION: STEREO MODE: Class: USB 2.0 Full Speed
Sampling frequency: 44.1/48kHz
Bit rate: 16 bit
Inputs / Outputs: 2 / 2
USB bus powered operation possible
(iPad operation supported in Stereo mode only)

Power Requirements
AA size (LR6) battery x 2
AC adapter: AD-17 (DC5V/1A/USB-type) (optional)
USB bus power

Notes: ***B-STOCK: Box damaged, product in perfect working order***


The Zoom H4n EXT is a 4-channel portable recorder with up to 32 GB memory card capacity and high-definition 24bit/96kHz audio recording. Its onboard X/Y stereo condenser mics are arranged with the right and left mics on the same axis. This design ensures that the mics are always an equal distance from the sound source for perfect localization without phase shifting. Frequency response remains uniform throughout your recording. The result is great stereo recording with natural depth and accurate imaging every time.

Custom designed, onboard X/Y stereo condenser mics allow variable recording patterns at either 90- or 120-. Our unique design lets you rotate each mic capsule from 90- (standard) to 120- (wide-angle) stereo for the ultimate versatility in any recording situation. Now your recordings can be richer than ever before. Choose up to 24-bit/96-kHz linear PCM WAV files for audio resolution that surpasses CD quality. Or, when maximum recording time with smaller file size is desired, select a variety of MP3 formats to produce smaller files suitable for web or e-mail distribution.

The H4n uses compact SD or high-capacity SDHC memory cards of up to 32GB. Unlike other media such as tape or discs, SD cards produce no mechanical noise, are not disturbed by vibrations and are readily available for your convenience. The new, digitally controlled, high-quality preamplifier renders audio so precisely, you'll sound like you recorded in a world-class studio. And this new preamp means you can make recording level adjustments on the fly. Of course, an automatic level setting function is also built in to optimize the level quickly as the situation requires.

Learning new songs is now a breeze with the H4n's adjustable playback speed that ranges from 50 to 150 percent, while keeping pitch the same. This is also a great feature for learning a language, conference recording, and various electronic news gathering (ENG) situations. With its low-cut filter, the H4n effectively reduces unwanted background noise like wind or air-conditioning noise. A variety of compressors and limiters help to optimize the dynamic range while preventing distortion.

For situations where you require maximized, continuous recording operation you can select stamina mode which effectively doubles battery life, letting you record continuously for about 11 hours in 16-bit/44.1-kHz linear PCM format. The H4n is the only handheld recorder that features built-in combination XLR/Phone connectors with phantom voltage source capability. With its Hi-Z inputs, you can record guitars or other line output sources such as mixing consoles. A separate external mic input supports plug-in power microphones.

Proper miking is essential to making a great recording. The H4n is the only handheld recorder that allows recording on four channels simultaneously by using your own external mics with its onboard mics. Use its built-in mixer to blend the channels for perfectly balanced recordings of extraordinary depth and clarity. You can set your H4n to automatically record whenever sound above your designated level is detected. This ensures that you capture everything of importance while minimizing blank sections such as when recording a conference or lecture.

The H4n can also be set to continuously record the most recent two seconds of audio in memory. Now, you never miss the beginning of anything you want to record, even when it begins suddenly. Even without external software, you can divide a recorded file at any desired point, right on the H4n. A built-in normalizing feature lets you optimize the volume level, and you can convert WAV files into MP3 directly on the unit as well.

You can choose between single-song playback, single-song repeat, all-songs playback, or all-songs repeat. This is great when you want to use the H4n as a personal trainer for learning new music. A-B repeat even lets you zoom in on a specified section of a song. The H4n supports Broadcast Wave Format (BWF) used in broadcasting and other professional A/V applications. Recorded files carry time stamp information and you can set markers (cue points) during recording or playback.

A stereo input signal can be mixed down to mono to reduce unwanted sound source position shifts between right and left channels. This is ideal for recording interviews.
The built-in M/S stereo decoder allows the use of an external Mid-Side microphone setups. The H4n converts the mid and side channel signals into a conventional stereo (L/R) signal for even more versatility, and it's only found on the H4n.

The MTR mode allows simultaneous 2-track recording and 4-track playback. With this feature, creating songs by overdubbing vocals and instruments is a snap. Level and panning can be adjusted individually for each track on the built-in mixer, and you can even do a mixdown right on the H4n.

*In the MTR mode, the recording format is fixed to 16-bit/44.1kHz WAV files.

up to 32gb memory & 24bit 96kHz

Notes: Zoom H4essential Handy Recorder

Four Tracks. More Options

With four tracks, 32-bit float recording, advanced X/Y mics and 2 XLR/TRS inputs, creators have more ways to record their music, podcasts, and audio-for-video.


Features

4-track 32-bit float recorder with Dual A/D Converters
Clip-free recording with no need to set gain
Records up to 96kHZ sample rate
Colour LCD Screen
130 dB SPL XY Mic
2 XLR/TRS combo inputs with locking connector
3.5mm mic/line input for lavalier mics and line level sources
Built-in mixer to adjust each track's audio level
Built-in speaker for quick reference playback
3.5mm line output for headphones or to connect to a camera
Voice Guidance accessibility for the visually impaired
32-Bit Float audio interface for PC, Mac, iOS, and Android devices via USB-C port
Use as an interface and record to SD card simultaneously
Using the BTA-1* Bluetooth Adapter, sync with wireless timecode devices via Bluetooth
Use the BTA-1* Bluetooth Adapter to pair with the H4essential Control App for iOS
Record to SD cads up to 1TB
10 hours of battery life on AA battery (2x) or USB-C Bus Power
*Please note: BTA-1 Adapter not included

Now in colour

The new full-colour LCD screen makes it easy to navigate through the H4essential's menu and functions.

Advanced X/Y mics

The onboard X/Y microphones capture crystal clear audio up to 130 dB SPL.

High capacity storage

The H4essential supports SDXC cards up to 1TB to record hours and hours of audio.

For interview and podcasts

Podcasters can use the H4essential's XLR inputs with external mics for one-on-one conversations and the X/Y mics for interviews on-the-go.

Big stage sound for musicians

The H4essential is perfect for recording music. With 2 XLR/TRS inputs and the stereo X/Y microphones it's easy to record live shows, rehearsals and songs.

Pair with your iOS device

Use the BTA-1* Bluetooth Adapter to pair with your iOS device to remotely hit record, adjust your mix, view your waveforms, and change settings.

Bluetooth timecode

With the BTA-1* Bluetooth Adapter you can also pair with Bluetooth timecode devices for audio and video sync. *BTA-1 Adapter not included

Specifications

Input & output channels

Inputs
Built-in mic (stereo): 1
XLR/TRS: 2
MIC/LINE IN: 1

Outputs
Headphones: 1
Built-in speaker (mono): 1

Inputs
Built-in mic: 90O XY stereo format
Directionality: Unidirectional
Sensitivity: -43 dB/1 Pa at 1 kHz
Maximum sound pressure input: 130 dB SPL

INPUT1-2
Connector: XLR/TRS combo jacks ×2, (XLR:2 HOT TRS:TIP HOT)
Input gain: Adjustment unnecessary
Input impedance: MIC: 3.8 kO or more, LINE: 39 kO or more
Maximum input level: MIC: +4 dBu, LINE: +24 dBu
Phantom power: +48 V
Channel total: 10 mA or less
Equivalent input noise MIC: -120 dBu or less(IHF-A) @150 O input, LINE: -95 dBu or less(IHF-A) @600 O input

MIC/LINE IN (supports plug-in power)
Connector: Stereo mini jack
Input gain: Adjustment unnecessary
Input impedance: 2 kO or more
OUTPUTS
Headphones
Connector: Stereo mini jack
Maximum output level: 20 mW + 20 mW(into 32 O load)
Output impedance: 15 O or less

Built-in speaker
Type: 20 x 30mm elliptical dynamic speaker
Effective maximum output: 250mW

RECORDER
Maximum simultaneous recording tracks: 4
Maximum simultaneous playback tracks: 4

Recording formats:
WAV
44.1/48/96 kHz,
32-bit float mono/stereo
BWF and iXML formats supported

Recording media:
4-32GB cards compatible with the microSDHC specification
64GB-1TB cards compatible with the microSDXC specification

Display: 2.0-inch full-colour LCD: 360 x 240

USB
Connector: USB Type-C (Use a USB cable that supports data transfer).
USB Mic: USB 2.0 High Speed, 44.1/48 kHz, 24-bit /32-bit float, 4-in/2-out
File transfer: USB2.0 High Speed

Remote
Dedicated wireless adapter: ZOOM BTA-1

Power:

2 AA batteries; Alkaline, lithium or rechargeable NiMH batteries
AC Adapter:
ZOOM AD-17:DC 5V / 1 A - USB bus power is supported.

Estimated continuous operation times using batteries: 2-track recording (built-in XY mic)
Alkaline batteries: About 9 hours
NiMH batteries (1900 mAh): About 9 hours
Lithium batteries: About 19 hours

48 kHz/32-bit float, phantom power off, no headphones, no remote, display power saving on, display brightness at Medium
These values are approximate.
Continuous battery operation times were determined using in-house testing methods.They will vary greatly according to use conditions.

Estimated continuous operation times using batteries: 4-track recording (built-in XY mic with INPUT 1-2)
Alkaline batteries: About 2 hours 30 minutes
NiMH batteries (1900 mAh): About 4 hours
Lithium batteries: About 8 hours
48 kHz/32-bit float, phantom power off, headphones used (33O load), no remote, display power saving on, display brightness at Medium
These values are approximate.
Continuous battery operation times were determined using in-house testing methods. They will vary greatly according to use conditions.

Estimated continuous operation times using batteries : 4-track recording (plug-in power mic with INPUT 1-2)
Alkaline batteries: About 40 minutes
NiMH batteries (1900 mAh): About 1 hour 30 minutes
Lithium batteries: About 3 hours 30 minutes
48 kHz/32-bit float, phantom power off, headphones used (33O load), no remote, display power saving on, display brightness at Medium
These values are approximate.
Continuous battery operation times were determined using in-house testing methods.They will vary greatly according to use conditions.

Power consumption: 3 W maximum
Dimensions: 66.9 mm (W) × 156.1 mm (D) × 38.0 mm (H)
Weight (including batteries): 243 g
Note: 0 dBu = 0.775 Vrms

Notes: If guitar is your passion, you need freedom and flexibility to explore all of its sound possibilities. The Zoom G3n Multi-Effects processor removes any creative barriers in your way.

The G3n is a versatile multi-effects processor that lets you defy genre with the most realistic stompbox, cabinet, and amplifier emulations Zoom has ever created. Its high-quality sound, portable design, 80 second Looper, and intuitive interface make it the perfect addition to your pedalboard. To put it simply, the G3n offers all the sounds and tools you need to improve your tone and sound greater than ever.

Boutique Pedals, Legendary Amps, and Superior Effects:

The G3n is pre-loaded with 70 expertly crafted and assembled DSP effects (68 effects, 1 looper pedal, and 1 rhythm pedal), plus 10 of the most realistic amp/cabinet emulators Zoom have ever created. Zoom have loaded the G3n with essential guitar sounds like overdrive, distortion, compression, EQ, delay, reverb, flanging, phasing, vibrato, and chorusing. Unique multi-effects such as Seq Filter, Reverse Delay, HD Hall, and OSC Echo are also included.

Create Complex Signal Chains:

Use up to seven effects and amp/cabinet models simultaneously, chained together in any order you like. It's like having hundreds of fully loaded pedalboards all in one compact and easy-to-use device.

Accurate, Realistic Amp and Cabinet Emulation:

Choose from five classic amp models and adjust the sound exactly as you would with the knobs and switches of the real thing - and then pair your amp with one of the five new cabinet emulators to complete the sound. Plus, you can download even more faithfully recreated amp/cabinet combinations such as Fender Bassman, Hi-Watt Custom 100, Mesa Boogie Dual Rectifier Orange Channel, Fender '65 Deluxe Reverb, and Orange Graphic120 - available now with more being released every month.

75 Custom-Crafted Patches and Counting:
Recreate essential guitar tones and pioneer new territory with 75 custom-designed patches created exclusively by Zoom guitarists. Use these patches to emulate the iconic sounds of Eddie Van Halen, Jimi Hendrix, Jimmy Page, Carlos Santana, Michael Schenker, and Brian May or explore something completely brand new.

Fast and Intuitive Editing:

The G3n's switches and knobs give you enhanced control and have the responsive, hands-on feel of a standard stompbox. The G3n combines three LCD displays to show whole effect-chains at a glance, making it easy to add, delete, or change the order of effects quickly. Plus, you can store up to 150 of your custom effects-chains as patches.

Practice and Perform:

There are 68 built-in rhythm patterns included with the G3n, making it the perfect practice rig and enabling "one-man band" performances. An onboard Looper (which can be used with the rhythm patterns) allows you to record and overdub phrases up to 80 seconds long through the effects of your choice. A built-in chromatic tuner lets you bypass the currently selected patch while tuning, or mute the signal altogether.

Inputs and Outputs:

The G3n can be easily integrated into any live performance or studio rig. In addition to a standard guitar input, there's an auxiliary stereo input for connecting smartphones or music players. It also includes a dedicated headphone jack for practice and dual outputs for mono or stereo L/R connection to guitar amps, PA systems, and audio interfaces. The Mic On/Off feature lets you optimize the G3n for use with a real amp and cabinet (Mic Off) as well as optimize for playing through a PA system or recording direct with amp and cabinet emulators (Mic On).

ZOOM Guitar Lab Software:

The free ZOOM Guitar Lab Mac/Windows software enables you to manage your patches and download new effects and amp/cabinet emulators. It includes both a Patch Manager for effects chains and an Effects Manager, with a simple graphic user interface that provides point-and-click control over re-naming or re-ordering your custom patches.

Notes: The Zoom G2x Four is a compact, easy-to-use multi-effects processor that offers a huge range of sounds with new amp modelling, multi-layer IR technology and over 100 effects:

Features

22 amp/cabinet models with newly developed multi-layer IR technology
79 guitar effects including boutique pedal modelling
Use of up to 7 effects simultaneously
250 preloaded patches with sounds that recreate guitar sounds from the 50s to today
300 patch memories in total
Additional effects/patches can be installed, edited and saved via the Handy Guitar Lab app for iOS and Android.
Expression pedal lets you control effects such as volume, pitch and wah in real time
Lightweight and compact design that fits in the pocket of your guitar case
80-second looper function
68 rhythm patterns that can be played in sync with the looper
Output EQ for quick adjustment of the overall sound to the playing environment
AUX IN jack for connecting a music player, etc.
Autosave function that automatically saves effect settings
Tuner function that supports open tuning and drop tuning
USB connection for Handy Guitar Lab, 2-in/2-out audio interface and firmware updates
Can be powered via USB bus (computer or power bank) or via the supplied AC adapter (AD-16)

Sounds without end

Using all-new amp modelling and innovative IR technologies, the Zoom G2X Four gives guitarists more sound variations to choose from than ever before. You can create amazing sounds right out of the box.

Comprehensive amp models

The G2X Four takes amp modelling to the next level. Carefully recreated emulations of classic amps are combined with speaker simulations using our new multi-layer IR technology. As a result, guitarists benefit from great sounds and always have the feeling of being on the "big stage", regardless of the environment.

Multi-layer IR

Each amp model is based on Zoom's innovative Multi-Layer IRs, which capture the sound characteristics as well as the feel of classic amps and speaker cabinets. These IRs have been miked at three volume levels through legendary cabinets and can be crossfaded and activated depending on the volume of your guitar.

Historical guitar sounds

Preloaded in the form of 250 presets, these patches were designed to document the sonic evolution of guitar sound. Each patch recreates the sound of a legendary song from the 1950s to the present day.

Brimming with effects

The internal patches include over 100 effects, recreating a wide range of traditional and boutique sounds, from classic spring reverbs to extreme distortion and modulation effects to wah-wah and more. Mix and match up to 7 effects to create your own patches.

Controls

Zoom's new cross-key navigation concept helps you control the pedal with just your feet and make adjustments on the fly. In addition, four endless knobs allow you to quickly adjust effect parameters as well as output settings.

Programming

The redesigned control surface makes it even easier to edit effect parameters, rearrange effect chains, and access the looper and tuner.

The perfect addition to your pedalboard
The G2X Four's compact design and diverse effects selection make it a powerful addition to any existing pedalboard.

Optimised for amps, monitor speakers and headphones

The G2X Four is designed to connect to guitar amps, studio monitors, PAs and headphones. After switching on, set up the G2X Four perfectly for your setup by selecting between LINE and AMP.

Looper

Use the built-in 80-second looper for songwriting or enhance your performance with additional sound layers.

Play to the beat

Play along to any of the 68 beats on the built-in rhythm machine. This rhythm section is the perfect accompaniment when practising, whether it's metal, blues or any other genre.

Express yourself

The G2X Four features an expression pedal for controlling volume, wah-wah and more.

Audio interface

Record at home or in the studio with your favourite effects and amp models by connecting the G2X Four to your computer via USB-C.

Guitar lab

Thanks to the ever-growing library of patches and effects, every guitarist can expand their sound selection via the Guitar Lab app (for iOS / Android).

Notes: For podcasters, videographers, bloggers, journalists and more, the F2 is the perfect audio solution for creators on the move.

The F2 is incredibly small, but its audio quality will amaze you.

The F2 features 32-bit float recording technology, allowing you to record the loudest audio signals without worrying about clipping. It will also record the quietest signals in beautiful detail. And the best part is you don't have to worry about setting the gain. Just plug in the lav and hit record.

Once you start your recording, use the F2's HOLD switch to ensure you don't accidentally stop recording.

Screw-lock connectors keep your lav plugged-in securely no matter the situation.

With the F2 actors can record and playback their lines to perfect their delivery.

The F2-BT comes with built-in Bluetooth. And with the free Zoom F2 Control app the F2-BT can wirelessly start/stop recordings, display battery levels, adjust output volume, control lo-cut and more.

You can also pair the F2-BT with a Bluetooth timecode synchronization device to receive and write timecode to recorded files. See Bluetooth Control features here.

The F2 Editor for PC and Mac allows you to adjust settings, format SD cards and more. Simply connect your F2 or F2-BT via a USB cable and launch the editor. The USB connection also makes it easy to transfer files to your computer. See the F2 Editor features here.

Whether a stroll through your garden, or the whispers and shouts of a dramatic reading, the F2 provides crystal clear recordings.

The F2 can record up to 15 hours (14 hours on the F2-BT) with two AAA batteries.

Record on microSD, microSDHC, and microSDXC cards up to 512GB.

The LMF-2 omnidirectional lavalier microphone has a low-profiled design, captures high-quality audio, and includes a windscreen and lapel mic clip.

The F2 Field Recorder gives you the option to choose the recording format that works best for your projects. Choose from 44.1 kHz/32-bit float or 48 kHz/32-bit float mono WAV files.

The F2 Is Perfect For Recording Interviews Anywhere.

TECHNICAL SPECIFICATIONS

LMF-2
Lavalier mic
Connector: 3,5 mm stereo mini (with screw lock)
Directionality: Omnidirectional
Sensitivity: -32 dB/Pa at 1 kHz
Maximum sound pressure input: 115 dB SPL
Cable length: 160 cm

F2 / F2-BT
Input
Connector: 3,5 mm stereo mini (with screw lock) Supports plug-in power (2.5 V)
Input impedance: 2 k? or more
Maximum input level: -5,5 dBu
Output
Connector: 3,5 mm stereo mini (with screw lock)
Maximum output level: 20 mW + 20 mW (into 32 O load)
Recording media
Cards compatible with microSD/microSDHC/microSDXC specifications (Class 4 or higher, 512 GB maximum)
Recording formats
WAV, 44.1kHz/32-bit float, 48kHz/32-bit float Mono, BWF format supported WAV
USB
USB Typ-C
Note: Use a USB cable that supports data transfer. USB bus power is supported.
Mass storage operation: USB 2.0 High Speed
PC app operation: USB 2.0 High Speed
Power
2 AAA batteries (alkaline, lithium or rechargeable NiMH batteries)
AC adaptor
Bluetooth
Bluetooth Ver4.2

The above values are approximate. Continuous battery operation times were determined using in-house testing methods. They will vary greatly according to use conditions.

External dimensions: 57,5 mm (w) x 46,4 mm (D) x 22,4 mm (H)
Weight (main unit only): 32 g

Notes: The Zoom F1 Field Recorder + Lavalier Mic is the perfect solution for videographers who need to capture the nuance of every word with professional quality audio.

The F1 Field Recorder + Lavalier Mic completes your video's story by providing outstanding audio no matter where your production takes you.

The F1-LP comes with Zoom's newly engineered LMF-1 Lavalier mic, designed for capturing every nuance. Combined with the F1, you can record high-resolution audio up to 24 bit/96 kHz, perfect for interviews, wedding vows, and more.

With its minimal profile, the F1 attaches neatly on belts, waistbands, or slipped into a pocket so the recorder can be easily concealed.

The LMF-1 Lavalier mic connects directly to the F1 and records to a micro SD card. By recording directly to the F1, interference or noise commonly experienced when using a wireless belt-pack system is eliminated.

The F1's one-touch buttons gives you easy access to record levels, limiter control, lo-cut filter and volume output. It's newly designed monochromatic LCD display ensures visibility even in bright sunlight.

Auto lock:
The Record Hold function or the Hold Switch can be used to prevent your subject from accidentally hitting buttons while recording.

No chance of overload:
An on-board limiter and auto-level control keep your levels safe when spikes in loud volume occurs.

Convenient power sources:
The F1 can be powered using two AAA batteries (included) or with the optional AD-17 power adapter.

USB connectivity:
Transfer recordings to your computer in card reader mode or record directly to your computer or iPad using the F1 in USB audio interface mode.

Here's what's included:

- F1 Field Recorder
- LMF-1 Lavalier microphone
- WSL-1 Windscreen
- MCL-1 Mic clip
- BCF-1 Belt clip
- 2 AAA batteries
- Quick guide

Notes: The Zomo Flightcase VCI-400 Plus NSE is exactly suitable and developed for the Vestax VCI-400 MIDI Controller. In addition, there is an extra notebook shelf included for your notebook and your mouse. The board is movable on rails, so you can easily push or pull it. You can transport your notebook safely and securely by using the hook and loop fasteners to fix it on the shelf.

The case is made of 9mm plywood, ensuring that the flightcase looks great for a long time. The extra wide aluminum profiles and the solid ball edges stabilize the Zomo Flightcase, too. The Zomo Flightcase VCI-400 Plus NSE is extremely robust and protects the Vestax VCI-400 MIDI Controller against scratches, dust and other damages.

This Zomo equipment case provides real professional quality and comes in a modern black stylish look.

Notes: With the T-10 NSE from Zomo you get a high quality flight case for the Technics SL-1210 MK7. The T-10 NSE in the appealing NSE edition impresses with its black look. This flightcase was developed to survive the rough DJ use without any problems and convinces with an extremely stable quality.

The extra strong, black lacquered aluminium profiles and very solid ball corners guarantee an absolutely high durability and provide noble and beautiful design accents. The practical inner padding of the T-10 NSE ensures optimal protection of the Technics DJ turntable against damage.

Abrasion and cigarette burns cannot harm the T-10 NSE, thanks to the solid, laminated 9mm plywood. Made for the rough DJ everyday life, the Zomo Flightcases are unrestricted tour-suitable and protect your valuable DJ equipment from damage, wetness or falls.

The Technics Equipment Case in the night black NSE Edition not only offers strong, professional quality, but also inspires with a modern look - without question an eye-catcher! The helpful butterfly snap locks ensure an extraordinarily stable fit of the cover and easy unlocking and locking. All NSE flightcases can also be locked with an optional lock for stronger protection.

Technical data

Suitable devices: 1x Technics SL-1210 MK2 / MK5 / MK7
Outer material: 9mm plywood
Color: Black NSE (Night Style Edition)
Weight: 8.68 kg
External dimensions: 517 (length) x 427 (width) x 224 (height) mm
** The devices pictured and/or mentioned in the photos are NOT included in the scope of delivery!

Suitable devices:

Technics SL-1210 MK2
Technics SL-1210 MK5
Technics SL-1210 MK7
Suitable brands: Technics

Laptop shelf included: No

Notes: The Zomo DJM-T1 NSE is a top class cushioned flightcase with a loophole on its frontside to enable all control elements and terminals to be easily accesible to the user. In the rear part there is enough space for whatever cables and plugs you may need. A removable lid, high quality butterfly locks and a stable handle complete this high quality transport suitcase.

This case is made from 9mm laminated plywood which is connected with strong and sturdy ball edges and aluminium profiles. Of course everything is designed in an beautiful black look. Your Pioneer DJM-T1 is perfectly protected by this ultra strong flightcase.

Notes: The Foldiplier is a 4hp odd/even harmonics generator with 2 different oscillating feedback paths. The folding core of the design originates from the odd harmonics (middle)section of the Serge Wave Multiplier. But the Foldiplier adds voltage control over the symmetry and offset as well as a switch for feedback, jumper selectable between, a transistor based oscillating fuzz inspired by the Hemmo Bazz Fuss with a lot more low harmonic content and a passive oscillating half wave rectification circuit with more high harmonic content. When these feedback oscillations mix with an incoming waveform some unpredictable and unique nonlinear timbres can be achieved. The module can also be used as a no-input experimental oscillator with the feedback switch engaged. All diodes in the module are silicon.

The Fold knob controls the amount of times the waveform is folded in on its self (indicated by the red led window below the knob). The C.V. knob below is an attenuator for incoming control voltage corresponding to the Fold jack(indicated by the red led window above the jack, it only responds to positive voltage). So, the Fold knob acts like an initial amount of folding depending on its position. For example, with the Fold knob fully clockwise you can get even more folds with a control voltage in at the Fold jack. The Offset knob controls how much positive DC voltage(0 to 5v, clockwise) or negative(0 to -5v counter clockwise) DC voltage(indicated by the led window above the Offset jack, red for positive, yellow for negative) injected into the waveform via the Symmetry knob. With the Offset knob position at noon(0v) there will little effect from the Symmetry knob. The Offset jack is expecting +5v to -5v with knob position at noon to scan through the positive and negative voltage. The Symmetry knob controls the amount of negative or positive offset voltage(dependent on the Offset knob) mixed with the waveform(indicated by the yellow led window above the Symmetry jack). If positive voltage is mixed with incoming waveform more folds will occur on the positive troughs of the waveform, likewise, when negative voltage is introduced more folds happen on the negative troughs. This part of the circuit can also be broken down by thinking of the Offset as a voltage controlled crossfader swinging between positive and negative voltages into a VCA controlled by the Symmetry knob and jack. When a voltage is present at the Symmetry jack the Symmetry knob becomes an attenuator. The Symmetry jack only responds to positive voltage.

Width: 4hp
Panel Material: Double Sided PCB panel with Classic and Soulless
Reverse Power Protected
Current Consumption: +12v: 40mA, -12v: 35mA
Depth: 47mm or 1.75"
All through-hole build
Ships with M3 black nylon screws
Expandable: No

Notes: The Dual VCO is a 4hp Dual Voltage Controlled Analog Oscillator Eurorack Module available as a DIY Eurorack Kit, PCB and Panel, or Built.

Each VCO has square, triangle, and sine wave out, coarse and fine tuning controls, a control voltage input, and a switch for selecting exponential or linear cv in. When a control voltage is inserted, the fine tune control becomes an attenuator for the incoming voltage. In exponential mode, when the attenuator is fully clockwise, the VCO will track around 5 volts per octave.

There are a couple quirks to these 8038 VCOs:

Below 300Hz the waveform symmetry is slightly off. triangle waves get a little uneven in the lfo range, the sine is not completely perfect to begin with the bottom trough and in the lfo range it slopes slightly, and the square turns more trapezoidal above 1khz(see scope shots) Also it doesn't track 1 volt per octave perfectly. usually the 1st and 3rd octave will be a couple cents off.

Other than those idiosyncrasies, it is a powerful, stable dual oscillator in a small footprint with no cross talk between oscillators. It's great for: drones and beating sine or triangle waves, cross modulating itself for interesting clocks/LFOs, creating complex waveforms/timbres through lin/exp frequency modulation.

Review: 'zake box.' is a collection of albums which include 7 LPs. The collection is housed in a 12×12 black press printed book box; rigid .058 caliper board lined interior, with the exterior wrapped with an elegant "crush" embossed paper lining. Hand-numbered & signed by zake. Limited to 20 units.

Notes: Updated version of the hugely popular MSP3, now with Yamaha's Twisted Flare Port technology for improved low-end response. Small design with big sound thanks to 4-inch woofer and precise dome tweeter.

Supplier's Notes:
MSP3A powered monitor speaker provides faithful sound reproduction in a compact form

The MSP3, a compact reference monitor speaker loved for many years, has been renewed as the MSP3A. This new reference monitor is the first in this series to include our Twisted Flare Port technology and provides an even clearer and tighter low-end while also realizing faithful sound reproduction.

The built-in 22W power amplifier is optimized for the speaker unit, which comprises a 10 cm (4") woofer and a 2.2 cm (.87") tweeter, to achieve a clear and natural reference sound.

The cabinet features a refined, simple design and weighs a mere 3.6 kilograms (7.9 pounds), making it easy to reposition and carry to different locations. Just like its predecessor, this monitor has multiple input connectors and controls, and is compatible with a variety of optional brackets, making it useful for a wide range of uses. These include serious audio and music monitoring in settings from small-scale studios to broadcast and post-production suites, as well as monitoring audio from digital musical instruments and ICT devices, and surround sound playback.

Twisted Flare Port technology, which is included in the MSP3A for the first time in this series, is an aerodynamic sound control technology that we at Yamaha have created by leveraging our extensive subwoofer development experience. Using it, we apply aerodynamic sound analysis and flow visualization measurement technologies to pinpoint and control noise generation mechanisms. Noise-generating air flow turbulence at both ends of the port is suppressed by changing how the port widens from input to output and adding a twist to it. Suppressing turbulence reduces bothersome muddiness in the sound and lowers the amount of noise generated at the port ends. This strengthens the connection between the sound and main speaker and delivers clear, tight low frequencies along with pitch and rhythm.

Compared to the air turbulence generated by the "ordinary port" shown in pink on the left, turbulence is reduced and air flows smoothly through the Twisted Flare Port shown in blue on the right.

Featuring a 22-watt built-in amplifier and Twisted Flare Port for clearer bass, the MSP3A reference monitor produces sound that is faithful to the original. With a variety of inputs, controls and optional support brackets, the MSP3A is ideal for small studios, post-production, monitoring electronic instruments and surround reproduction.

General specifications:

Speaker type: 2-way powered speaker, Bass-reflex type (Twisted Flare Port)
Frequency response: (-10dB) 67Hz - 22kHz
Components- LF: 4" (10 cm) Cone, HF: 0.8" (2.2 cm) Dome
Crossover: 4kHz
Output power: 22W
Maximum Output Level (Measured peak, IEC noise@1m): 99dB SPL
Input sensitivity- LINE 1 : -10 dBu, 10kO (RCA), LINE 2 : +4.0 dBu, 10kO (Combo)
I/O connectors- LINE 1 : RCA, LINE 2 : Combo (XLR/TRS phone)
Indicators: Power ON (Green LED)
Power requirements (May vary depending on region): 120V 50/60Hz, 110 - 120V 50/60Hz, 230V 50/60Hz, 220 - 230V 50/60Hz, 220V 50Hz, 240V 50Hz
Power consumption: 30W
Others: Level control (LINE1, LINE2); Tone control (LOW = Center, REF = 100Hz : MIN -3.0 i 2.0 dB, MAX +3.0 i 2.0 dB; HIGH = Center, REF = 10kHz : MIN -3.0 i 2.0 dB, MAX +3.0 i 2.0 dB)
Dimensions: W- 144mm (5-5/8"), H- 236mm (9-1/4"), D- 166mm (6-5/8")
Net weight: 3.6kg (7.9 lbs.)
Accessories: Power cord, Owner's manual
Packaging: Single
Flying and mounting hardware: 2 x M5 (Depth 15)
Options: Mic stand adaptor BMS-10A, Free-angle clamp BAS-10, Wall mounting bracket BWS20-120 / BWS20-190, Ceiling bracket BCS20-150 / BCS20-210

Notes: The smallest speaker in Yamaha's range, the compact MS101-4 sits happily on even the most cramped desktop or attaches to a mic stand for versatile monitoring anywhere.

Supplier's Notes:
The industry standard in compact monitors

Yamaha MS101-4: The de facto standard for compact monitoring in a simple form

The standard model in Yamaha's range of desktop utiility powered monitors, the MS101-4 offers portability in a simple, compact design, with comprehensive functions for outstanding usability. The MS101-4 comes with a 3/8-16 threaded female mounting for direct attachment to a Euro microphone stand. Optional accessories can also be added for use in a wide range of applications.

A compact, convenient approach to high-quality monitoring anywhere

Compatible with both line and mic inputs, the MS101-4 offers the flexibility needed for temporary or permanent use in applications requiring simple, compact monitors.

Simple, portable, durable design

Yamaha Powered Monitor Speaker MS101-4: front and rear

With the controls (power switch, volume and tone controls) and the combo jack input on the lower front panel, you'll find the MS101-4 is easy to operate. The sturdy metal grill offers complete protection for the four-inch cone driver, while the rear panel is equipped with one stereo mini and a TRS Phone input connector, along with an output jack. An AC inlet for a removeable power cord provides excellent portability. The bass reflex port is also located on the rear surface, resulting in a more compact chassis.

MS101-4 Powered Monitor Speaker

The standard model in our range of desktop utiility powered monitors, the MS101-4 offers portability in a simple, compact design, with comprehensive functions for outstanding usability.

30W of amplifier power provides clean, high output sound
Redesigned enclosure for an even lower profile
Combo Input jack accepts both XLR and 1/4" connectors
Directly mountable on Euro microphone stands (optional mic stand adaptor BMS-10A is available for adjusting tilt angle)

General specifications

Speaker type: Full range Powered Speaker, Bass-reflex Type
Frequency range (-10dB): 77 Hz-20 kHz
Maximum output level (1m; on axis): 115 dB SPL *1
Components: LF-HF 4" Cone, 1" Voice coil, Ferrite magnet
Dimensions: W: 142 mm, H: 196 mm, D: 187 mm
Net weight: 2.1 kg (4.6 lbs)
Flying and mounting hardware Screw threads (bottom): 2 x M5 depth 11 mm pitch 60 mm (for 2, M5 x 6-10 mm screws), 1 x 3/8" depth 12 mm (for 1 x 3/8" x 9-11 mm screw)
Amplifier class: Class-D
Power rating: Dynamic: 30 W
Continuous: 20 W
Cooling: Natural cooling (no fan)
I/O Connectors: Mic Input: [Front] INPUT: Combo, [Rear] INPUT LINE 1: Stereo Mini, INPUT LINE 2: Phone (TRS)
Line Out: 1 x Phone (TRS)
AC: 1 x AC inlet
Input impedance: [Front] INPUT: LINE=5.4 kO / MIC= 5.4 kO, [Rear] INPUT LINE 1,2: 10 kO
Input sensitivity: [Front] INPUT: LINE=-10 dBu / MIC=-40 dBu, [Rear] INPUT LINE 1, 2: -10 dBu (VOLUME: Maximum)
Input Level: [Front] INPUT: LINE=+5 dBu / MIC=-25 dBu, [Rear] INPUT LINE 1, 2: +5 dBu (Nominal Input Level / VOLUME: Center), [Front] INPUT: LINE=+20 dBu / MIC=-10 dBu, [Rear] INPUT LINE 1, 2: +20 dBu (Maximum Input Level)
Others: Controls: 1 x VOLUME, 1 x LOW CONTROL, 1 x HIGH CONTROL, POWER
Indicators POWER (Green LED)
Power consumption: 1/8 Power Consumption: 10 W, Idle Power Consumption: 3 W
Power requirements: 100 V - 240 V, 50/60 Hz
Options: Mic stand adaptor BMS-10A, Free-angle clamp BAS-10, Wall mounting bracket BWS20-190, Ceiling bracket BCS20-150 / BCS20-210

Notes: For more than a century, Yamaha has been building a legacy of superior craftsmanship and innovation exemplified in their products, from an unrivalled catalogue of world-class musical instruments to touring-grade professional audio. Now in its third incarnation, the MG Series embodies this pursuit of design excellence, and incorporates some of the same technologies developed for use in high-end professional consoles, including studio-quality preamps, powerful digital processing, and a rugged, reliable construction.

With an intuitive, easy-to-use interface, the MG Series boasts an extensive line-up of compact mixing consoles with models ranging from six to twenty channels, suitable for a diverse range of users and applications. For installed, recording, or live music settings, the solid construction and flexible design of these consoles lets you shape your sound with confidence, continually delivering peak performance and a level of sound quality and reliability unrivalled in its class.

Included in the box:

1 x Yamaha MG10XUF Analogue Mixer
1 x AC Adapter
1 x Cubase AI Download Information
1 x Owner's Manual
1 x Technical Specifications Sheet

Notes: Great value from this compact analogue mixer with built-in effects. Ten channel design with durable build and excellent sound quality. Also available as MG10XU with built-in USB audio interface.

Supplier's Notes:
MG-X are an addition to the MG Mixer line up. Available in 10, 12 and 16 channel versions, this variant of MG Mixer features our acclaimed SPX effects, without the USB option featured on the XU model - perfect for all scenarios where USB streaming is not needed. The quality and features of the MG mixers series is of course retained, whilst the new models are presented in a fresh black/grey finish.

Road Tough. Studio Ready.

For more than a century, Yamaha has been building a legacy of superior craftsmanship and innovation exemplified in all of their products, from an unrivalled catalog of world-class musical instruments to touring-grade professional audio. Now in its third incarnation, the MG Series embodies this pursuit of design excellence, and incorporates some of the same technologies developed for use in high-end professional consoles, including studio-quality preamps, powerful digital processing, and a rugged, reliable construction.

With an intuitive, easy-to-use interface, the MG Series boasts an extensive lineup of compact mixing consoles with models ranging from six to twenty channels, suitable for a diverse range of users and applications. For installed, recording, or live music settings, the solid construction and flexible design of these consoles lets you shape your sound with confidence, continually delivering peak performance and a level of sound quality and reliability unrivalled in its class.

As same as XU models, X models have SPX effects. Not to mention live session, but also installation cases like conference rooms, banquet halls and weddings, users can have wide range of use. Stylish grey colour models enhance your performance.

10-Channel Mixing Console
Max. 4 Mic / 10 Line Inputs (4 mono + 3 stereo)
1 Stereo Bus
1 AUX (incl. FX)
D-PRE mic preamps with an inverted Darlington circuit
1-Knob compressors
High-grade effects: SPX with 24 programs
PAD switch on mono inputs
+48V phantom power
XLR balanced outputs
Metal chassis

Dimensions (W×H×D): 244 mm x 71 mm x 294 mm (9.6"x 2.8"x 11.6")
Net Weight: 2.1 kg (4.63 lbs.)

Notes: The Yamaha MG Series of mixers feature a design and construction that will handle the standard wear and tear of the active musician. Featuring the steel chassis that is impact resistant and powder coated, this mixer will take any bumps and scratches without it getting damaged or looking old. The sleek design does not compromise any part of the finished product. A state of the art design allows for convection cooling, meaning your power unit will not overheat your unit after continuous use. Separating the power supply from the analog circuitry inside the mixer allows for near silent background noise, allowing for a serious and high quality output sound. As well as this, the knob placement has been put above the chassis of the console, thus not damaging circuitry underneath should the device ever be dropped or mishandled.

The MG10 includes a number of features that make it stand out above the rest of compact mixers on the market. It has phantom power on the first four channel's class A preamps for any condenser microphones..These four channels also include a 3 band EQ and a high pass filter, allowing a lot of frequency control on such a small mixer. As well as this, three stereo channels for jack devices make up channels 5 through to 10. Outputs are aplenty on the MG10, featuring stereo jack and XLR outputs, as well as a stereo jack monitor and phones output for monitoring purposes.

On top of the smaller MG06, this mixer includes full adjustable panning on all channels, making it easy to give a fully stereo image when gigging. As well as this, the mixer also has an effects out/return function, allowing an external effects board to be added, and with full individual control of the FX level on each channel. As well as this, a compression knob has been added to channels 1 and 2, allowing for easy control over instruments or vocals with fluctuating volumes.

Notes: The 3rd generation of the Yamaha MG Mixer brings with it some neat updated features, great build quality and the same great sound and flexibility that we have come to expect from a Yamaha mixing console. Built with a sturdy metal chassis, the MG III series mixers are designed to last.

The MG-06X is a 6 channel mixer with 2 D-Pre Mic inputs for super-quiet operation. The MG-06X has +48v phantom power for condenser mics and XLR balanced outputs to ensure that no matter how big or small your operation is, the MG06X will act as the lynch-pin mixing desk that you can depend upon.

Also on the MG06X are a bank of Yamaha SPX effects to further enhance your sound with no need to add in additional processors.

Notes: ***B-STOCK: Original box damaged, product is in different packagaing but in perfect working order***


Everyone loves a white speaker cone, right? Firm favourites since their release in 2013, the HS7s are ideal for entry-level production use or as a monitor for home DJ setups.

Supplier notes:
Ever since the 1970's the iconic white woofer and signature sound of Yamaha's nearfield reference monitors have become a genuine industry standard for a reason - their accuracy. Unlike studio monitors with added bass or treble frequencies which may sound more flattering at first, HS Series speakers were designed to give you the most honest, precise reference possible, providing an ideal sonic platform to build on throughout the mixing process.

By combining acquired knowledge and expertise with state-of-the-art sound technologies, Yamaha's speaker engineering team have examined, then optimized, every aspect that has contributed to making these monitors the most trusted in the business. The second generation HS Series also adds a new 6.5" model to the lineup, bringing its exceptional accuracy to an even greater variety of recording environments.

Notes: ***B-STOCK: Box opened, product in perfect working order***


Loosely inspired by the look of the classic NS10 studio monitors, Yamaha's HS range offers much more modern sound. Punchy low end and clear highs from this 6.5-inch model.

Supplier's notes:
This second generation of 'HS' nearfield reference monitors, like their predecessors, share the same design philosophy as the legendary NS-10M studio monitors - Providing accurate signal reproduction and superior sonic performance.

The Yamaha HS7 employ a new, highly efficient tweeter providing an extended high frequency range up to 30KHz. The matching HS8S 150W powered subwoofer provides an extend bass when a well defined bottom end is required.

A low resonance enclosure built using a three way mitre joint technique ensures that the corners of the speaker are firmly anchored leading to dramatically improved durability and the elimination of unwanted resonances that can colour the original sound. Yamaha's 'Vortex Sound Control' technology is deployed to decrease unwanted airflows around the speaker ports. This in turn reduces audible noise by up to 6dB.

Product video: http://www.youtube.com/watch?feature=player_embedded&v=Dvj3StP4fVE

Notes: Yamaha's top-end headphone offering. Developed specifically for studio use, with 45mm drivers and a closed-back design for isolation. Folding arms with moveable ear cups.

Supplier notes:
HPH-MT8 headphones are designed to deliver accurate response and high-resolution sound with precise stereo imaging, and faithfully reproduce every nuance of the mid to high-end with tight bass. Yamaha has applied decades of accrued knowledge and expertise in professional and high-end studio equipment manufacturing to the design of each and every acoustic component in these headphones.

It takes a true original to become an industry standard, and since their inception Yamaha's NS-10M studio monitor speakers have become a mainstay of professional studios the world over, renowned for their legendary accuracy. From the NS-10M to the MSP and HS Series, Yamaha has remained faithful to a design philosophy focused on delivering the sonic accuracy that provides sound professionals with the perfect platform upon which to develop and establish their own signature sound. MT Series studio monitor headphones remain true to this fundamental concept, delivering precision sound reproduction that meets the demanding requirements of today's professional studio and monitoring applications. With unmatched fidelity in a sturdy yet stylish design, and the durability to hold up to the rigors of the road, Yamaha's MT Series headphones offer a level of comfort you'll be thankful for after long hours in a critical listening environment.

Drivers:
MT8 headphones feature custom drivers equipped with 45mm CCAW voice coils and powerful neodymium magnets to achieve precise definition and control. Made from aluminium wire coated in highly conductive copper, these lightweight yet powerful drivers provide a broad frequency range of 15 Hz-28 kHz, and deliver flat, ultra high-resolution sound that meets the demands of strict professional monitoring.

Other acoustic components:
From the arms to the ear cups, all acoustic components in MT8 headphones have been designed to deliver the most accurate sound possible by completely eliminating extraneous resonance.

Design:
MT8 headphones feature a sleek, stylish design with a closed-back, circumaural configuration that provides a comfortable fit and excellent isolation.

Ear pads:
MT8 headphones are equipped with large ear pads for an extremely comfortable fit. Smooth protein-skin leather and low-resistance cushions that absorb excess vibrations provide stress-free wearability and high levels of isolation - ideal for serious studio recording and live mix monitoring situations in particular, where sound leakage is a concern.

Wearability:
A three-dimensional arm pivot construction and highly adjustable slider length allows the angle of the ear pads to fit the shape of the wearer's head perfectly, helping to alleviate fatigue when working for extended periods. MT8 headphones also feature moveable earcups, allowing single-ear monitoring when required.

Connectivity:
MT8 headphones have been designed to make users aware of the cable without being hindered by it, while providing enough length for monitoring applications where mobility is a consideration. For added versatile usability, the detachable straight 3 meter cable and 1.2 meter coil cable come equipped with a corrosion-resistant gold-plated stereo mini-plug and a gold-plated 6.3 mm stereo adaptor, allowing MT8 headphones to be used with professional audio gear.

Notes: ***B-STOCK: Box opened, but product is in excellent condition and in perfect working order***


Entry-level model in the FGDP range, billed as the ultimate finger drum pads. The portable, rechargeable FGDP-30 features a built-in tone generator and speaker, all controlled by outstandingly responsive pads arranged in an ergonomic format.

Supplier's Notes:
The ultimate finger drum pad

With ultra-sensitive Pads in an ergonomic layout perfect for finger drumming, the FGDP features a Tone Generator, internal speaker, and rechargeable battery that make it a true all-in-one instrument that you can play anywhere. Let your fingers make the rhythm!

Made for finger drumming

Thoughtfully designed layout and Pads for the ultimate finger drumming performance. From sampled acoustic drums that sound like they're right in front of you to powerful electronic sounds, beloved and curated by top professional artists, covering a wide range of genres. Yamaha promises uncompromising performance.

Optimised layout

Introducing a distinctive Pad layout meticulously designed for optimal finger drumming by prioritizing ergonomic comfort.

With the FGDP, you have the freedom to assign Voices to Pads according to your creative vision, but at Yamaha, we recommend the 3-finger style. Harness the power of your thumb for the kick drum, rely on the enduring middle finger for precise hi-hat control, and let your dexterous index finger bring to life the delicate nuances and intricate phrases of the snare.

The home position enables you to effortlessly execute fundamental rhythms, like 8th notes using just one hand. You can use your other hand to play on the other symmetrically laid out pads to unleash captivating back beats in 16th note or double kick styles.

Equipped with an ample number of Pads perfectly suited for finger drumming, the FGDP empowers you to deliver your finest performances, setting itself apart from conventional Samplers and MIDI Pads.

Expressive precision

Featuring cutting-edge Pads designed to capture every subtle nuance, the FGDP ensures that no detail goes unnoticed. With the powerful combination of the internal Tone Generator, you can deliver delicate performances encompassing ghost notes, impactful accents, flams, and lightning-fast rolls. Moreover, the Pads support Aftertouch, enabling unique drumming techniques such as cymbal choking by applying pressure to a Pad while holding it pressed. With the FGDP, your drumming possibilities are limitless.

Specifications

Size/Weight

Dimensions
Width: 223 mm (8-3/4 in)
Height: 49 mm (1-15/16 in)
Depth: 195 mm (7-11/16 in)
Weight: 1.0 kg (2 lbs. 3 oz)

Packing Box
Width: 282 mm (11-1/16 in)
Height: 108 mm (4-1/4 in)
Depth: 244 mm (9-5/8 in)

Pad section

Drum Pads: 18 pads
Number of Trigger Settings: Preset 12
User: Preset overwrite
After Touch: Polyphonic, Channel

Control Interface
Voice Guide: English

Tone generator
Tone Generator AWM2

Maximum Polyphony: 64 notes
Drum kits: Preset: 39 Kits, User: Preset overwrite
Voices: 1,212
Kit Edit: Yes (only some parameter)
Effects Reverb: 11, Chorus: 10, Variation: 23, Speaker EQ: 5

Click
Tempo: 30 to 300 BPM, Tap Tempo supported.
Beat: 1 - 16
Others: Patterns (1/4, 1/4T, 1/8, 1/8T, 1/16, 1/16T, Clave)

Functions

Registration Memory

Number of Buttons: 2
Preset: 1 Bank, User: Preset overwrite

Amplifiers and Speakers
Amplifiers: 2.5 W
Speakers: 4 cm × 1

Other

Connectors
Headphones: Headphones/Output (Stereo mini jack x 1)
AUX IN AUX IN (stereo mini jack × 1)
USB: USB TO HOST (Micro B)

Power Supply
Power Supply: USB power adaptor 5 V/1.5 A or greater USB BC specification compatible products (Sold separately)
Internal Battery: 1,400 mAh, 4.5 Wh 3 hours
Power Consumption: 4 W

Accessories
Included Accessories: Owner's Manual, USB cable

Notes: Entry-level model in the FGDP range, billed as the ultimate finger drum pads. The portable, rechargeable FGDP-30 features a built-in tone generator and speaker, all controlled by outstandingly responsive pads arranged in an ergonomic format.

Supplier's Notes:
The ultimate finger drum pad

With ultra-sensitive Pads in an ergonomic layout perfect for finger drumming, the FGDP features a Tone Generator, internal speaker, and rechargeable battery that make it a true all-in-one instrument that you can play anywhere. Let your fingers make the rhythm!

Made for finger drumming

Thoughtfully designed layout and Pads for the ultimate finger drumming performance. From sampled acoustic drums that sound like they're right in front of you to powerful electronic sounds, beloved and curated by top professional artists, covering a wide range of genres. Yamaha promises uncompromising performance.

Optimised layout

Introducing a distinctive Pad layout meticulously designed for optimal finger drumming by prioritizing ergonomic comfort.

With the FGDP, you have the freedom to assign Voices to Pads according to your creative vision, but at Yamaha, we recommend the 3-finger style. Harness the power of your thumb for the kick drum, rely on the enduring middle finger for precise hi-hat control, and let your dexterous index finger bring to life the delicate nuances and intricate phrases of the snare.

The home position enables you to effortlessly execute fundamental rhythms, like 8th notes using just one hand. You can use your other hand to play on the other symmetrically laid out pads to unleash captivating back beats in 16th note or double kick styles.

Equipped with an ample number of Pads perfectly suited for finger drumming, the FGDP empowers you to deliver your finest performances, setting itself apart from conventional Samplers and MIDI Pads.

Expressive precision

Featuring cutting-edge Pads designed to capture every subtle nuance, the FGDP ensures that no detail goes unnoticed. With the powerful combination of the internal Tone Generator, you can deliver delicate performances encompassing ghost notes, impactful accents, flams, and lightning-fast rolls. Moreover, the Pads support Aftertouch, enabling unique drumming techniques such as cymbal choking by applying pressure to a Pad while holding it pressed. With the FGDP, your drumming possibilities are limitless.

Specifications

Size/Weight

Dimensions
Width: 223 mm (8-3/4 in)
Height: 49 mm (1-15/16 in)
Depth: 195 mm (7-11/16 in)
Weight: 1.0 kg (2 lbs. 3 oz)

Packing Box
Width: 282 mm (11-1/16 in)
Height: 108 mm (4-1/4 in)
Depth: 244 mm (9-5/8 in)

Pad section

Drum Pads: 18 pads
Number of Trigger Settings: Preset 12
User: Preset overwrite
After Touch: Polyphonic, Channel

Control Interface
Voice Guide: English

Tone generator
Tone Generator AWM2

Maximum Polyphony: 64 notes
Drum kits: Preset: 39 Kits, User: Preset overwrite
Voices: 1,212
Kit Edit: Yes (only some parameter)
Effects Reverb: 11, Chorus: 10, Variation: 23, Speaker EQ: 5

Click
Tempo: 30 to 300 BPM, Tap Tempo supported.
Beat: 1 - 16
Others: Patterns (1/4, 1/4T, 1/8, 1/8T, 1/16, 1/16T, Clave)

Functions

Registration Memory

Number of Buttons: 2
Preset: 1 Bank, User: Preset overwrite

Amplifiers and Speakers
Amplifiers: 2.5 W
Speakers: 4 cm × 1

Other

Connectors
Headphones: Headphones/Output (Stereo mini jack x 1)
AUX IN AUX IN (stereo mini jack × 1)
USB: USB TO HOST (Micro B)

Power Supply
Power Supply: USB power adaptor 5 V/1.5 A or greater USB BC specification compatible products (Sold separately)
Internal Battery: 1,400 mAh, 4.5 Wh 3 hours
Power Consumption: 4 W

Accessories
Included Accessories: Owner's Manual, USB cable

Notes: Two heads are better than one, and when it comes to live streaming, the same can be said for microphone inputs. The AG06MK2 offers the same user-friendly configuration and operation that has become synonymous with the AG series, but also comes equipped with two phantom powered mic inputs for condenser microphones. Combined with flexible connectivity including an upgraded 4-pole mini I/O, the AG06MK2 opens up a broader range of dialogue, interview, musical ensemble performance, or other streaming applications that the AG01 or AG03MK2 setups can't cover.

The AG06MK2 allows you to connect two condenser microphones of your choice, as well as two stereo line inputs for instruments, and an upgraded 4-pole mini jack (TRRS) for smartphone input/output capability. Of course, it is also possible to add audio from devices connected via USB in LOOPBACK mode as with previous AG models. This diverse range of connectivity makes it possible to use high-sensitivity microphones along with each of the audio sources for a variety of streaming applications such as podcasts with dialogue, interviews, vocal performances with an acoustic instrument, or even a live band.

With a design similar to a mixing console, the AG06MK2 is equipped with a variety of physical controls that help you shape and manage the audio you stream to your audience. The newly added mute button allows you to cut your mic input at a moment's notice if your situation demands it, and can even be controlled using Yamaha's FC5 dedicated foot switch (sold separately) which can also add reverb to your signal while keeping your hands free for other tasks.

Sound quality can often be a deciding factor for whether or not someone will tune in to your live streaming content. With the adoption of USB-C and the requisite improved internal circuitry, the AG06MK2 sees a significant improvement in sound quality compared to previous models giving your streaming a more professional edge.

Regardless of your particular streaming application, you'll likely want to add some depth and dimension to the audio you're broadcasting to add professionalism to your streaming content. The AG06MK2 is equipped with optimized 1-TOUCH COMP/EQ and REVERB controls to dial in the sound that best suits your style, and a 1-TOUCH amp simulator to add authenticity and punch to your guitar input.

All these tools are processed by the internal DSP chip so there is no delay, making it particularly valuable for live streaming when real-time accuracy is crucial.

You also have the option to turn these effects off completely to capture pure, raw recordings through your favorite microphone for music/audio production that will be edited by an engineer later.

AG Controller software allows users to easily and precisely check and configure the DSP audio processing inside the AG. Offering two modes of operation, "Simple" and "Detail", AG Controller gives users of varying music production experience detailed management of their audio from any Windows/Mac or iOS device connected to the AG06MK2 via USB.

The sleek, slim, and compact body of the AG06MK2 can be placed on virtually any flat surface.

By combining it with the optional BMS-10A adaptor, it can be installed on a microphone stand. It can also be connected to a mobile battery to configure a minimalistic, mobile streaming station anywhere.

Specifications

Input Channels
Mono[MIC/LINE]: 2 - CH1: Combo (Mic, +48 V phantom power / Line), 3.5 mm (1/8") stereo mini (Headset mic, Plug-in power), CH2: Combo (Mic, +48 V phantom power / Guitar input / Line) *CH1 input and Headset mic cannot be used simultaneously
Mono[MIC/LINE]Stereo[LINE]: 2 - L/R Stereo: Phone, RCA
Smartphone: 1 - PHONES / HEADSET PHONES *Cannot be used simultaneously
USB: 1

Output Channels
PHONES: 2 - PHONES / HEADSET PHONES *Cannot be used simultaneously
Smartphone: 1 - 4-pole mini input/output (TRRS)
MONITOR OUT: 1
STEREO OUT: 1
USB: 1

Bus: 1 stereo
Functions: MUTE button x 1, PAD button x 2, HI-Z button x 1, STREAMING OUT (DRY CH 1-2G / INPUT MIX / LOOPBACK), MIX MINUS MIC (ON / OFF)
On-board processors - DSP: COMP/EQ, REVERB (SPX Reverb), AMP SIM *Detail is operated on AG Controller
USB Audio: 2 IN / 2 OUT, USB Audio Class 2.0 Compliant, Sampling Frequency: Max. 192 kHz, Bit Depth: 24-bit, Type-C
USB DC Power input: 1 - Type-C, 5 V DC, 900 mA

Power requirements: 5 V DC, 900 mA
Power consumption: Max. 4.5 W
Dimensions W x H x D: 152 mm (6.0") x 63 mm (2.5") x 201 mm (7.9")
Net weight: 0.9 kg (2.0 lbs)
Included Accessories: USB2.0 Cable (1.5 m), Quick Guide, Safety Guide, Wavelab Cast Download Information, Cubase AI Download Information
Operating Temperature: 0 to + 40 C

Notes: Two heads are better than one, and when it comes to live streaming, the same can be said for microphone inputs. The AG06MK2 offers the same user-friendly configuration and operation that has become synonymous with the AG series, but also comes equipped with two phantom powered mic inputs for condenser microphones. Combined with flexible connectivity including an upgraded 4-pole mini I/O, the AG06MK2 opens up a broader range of dialogue, interview, musical ensemble performance, or other streaming applications that the AG01 or AG03MK2 setups can't cover.

The AG06MK2 allows you to connect two condenser microphones of your choice, as well as two stereo line inputs for instruments, and an upgraded 4-pole mini jack (TRRS) for smartphone input/output capability. Of course, it is also possible to add audio from devices connected via USB in LOOPBACK mode as with previous AG models. This diverse range of connectivity makes it possible to use high-sensitivity microphones along with each of the audio sources for a variety of streaming applications such as podcasts with dialogue, interviews, vocal performances with an acoustic instrument, or even a live band.

With a design similar to a mixing console, the AG06MK2 is equipped with a variety of physical controls that help you shape and manage the audio you stream to your audience. The newly added mute button allows you to cut your mic input at a moment's notice if your situation demands it, and can even be controlled using Yamaha's FC5 dedicated foot switch (sold separately) which can also add reverb to your signal while keeping your hands free for other tasks.

Sound quality can often be a deciding factor for whether or not someone will tune in to your live streaming content. With the adoption of USB-C and the requisite improved internal circuitry, the AG06MK2 sees a significant improvement in sound quality compared to previous models giving your streaming a more professional edge.

Regardless of your particular streaming application, you'll likely want to add some depth and dimension to the audio you're broadcasting to add professionalism to your streaming content. The AG06MK2 is equipped with optimized 1-TOUCH COMP/EQ and REVERB controls to dial in the sound that best suits your style, and a 1-TOUCH amp simulator to add authenticity and punch to your guitar input.

All these tools are processed by the internal DSP chip so there is no delay, making it particularly valuable for live streaming when real-time accuracy is crucial.

You also have the option to turn these effects off completely to capture pure, raw recordings through your favorite microphone for music/audio production that will be edited by an engineer later.

AG Controller software allows users to easily and precisely check and configure the DSP audio processing inside the AG. Offering two modes of operation, "Simple" and "Detail", AG Controller gives users of varying music production experience detailed management of their audio from any Windows/Mac or iOS device connected to the AG06MK2 via USB.

The sleek, slim, and compact body of the AG06MK2 can be placed on virtually any flat surface.

By combining it with the optional BMS-10A adaptor, it can be installed on a microphone stand. It can also be connected to a mobile battery to configure a minimalistic, mobile streaming station anywhere.

Specifications

Input Channels
Mono[MIC/LINE]: 2 - CH1: Combo (Mic, +48 V phantom power / Line), 3.5 mm (1/8") stereo mini (Headset mic, Plug-in power), CH2: Combo (Mic, +48 V phantom power / Guitar input / Line) *CH1 input and Headset mic cannot be used simultaneously
Mono[MIC/LINE]Stereo[LINE]: 2 - L/R Stereo: Phone, RCA
Smartphone: 1 - PHONES / HEADSET PHONES *Cannot be used simultaneously
USB: 1

Output Channels
PHONES: 2 - PHONES / HEADSET PHONES *Cannot be used simultaneously
Smartphone: 1 - 4-pole mini input/output (TRRS)
MONITOR OUT: 1
STEREO OUT: 1
USB: 1

Bus: 1 stereo
Functions: MUTE button x 1, PAD button x 2, HI-Z button x 1, STREAMING OUT (DRY CH 1-2G / INPUT MIX / LOOPBACK), MIX MINUS MIC (ON / OFF)
On-board processors - DSP: COMP/EQ, REVERB (SPX Reverb), AMP SIM *Detail is operated on AG Controller
USB Audio: 2 IN / 2 OUT, USB Audio Class 2.0 Compliant, Sampling Frequency: Max. 192 kHz, Bit Depth: 24-bit, Type-C
USB DC Power input: 1 - Type-C, 5 V DC, 900 mA

Power requirements: 5 V DC, 900 mA
Power consumption: Max. 4.5 W
Dimensions W x H x D: 152 mm (6.0") x 63 mm (2.5") x 201 mm (7.9")
Net weight: 0.9 kg (2.0 lbs)
Included Accessories: USB2.0 Cable (1.5 m), Quick Guide, Safety Guide, Wavelab Cast Download Information, Cubase AI Download Information
Operating Temperature: 0 to + 40 C

Notes: With its variety of inputs and outputs, DSP effects, and LOOPBACK function, the original AG03 quickly established itself as a staple amongst live streamers looking to configure a simple yet comprehensive setup without compromising on sound quality. The next generation AG03MK2 adds more flexible connectivity including 4-pole mini I/O expanding the range of streaming styles, as well as a new mute button crucial for various live streaming applications. Along with improvements in build, design, internal circuitry, and overall sound, the MK2 will further solidify the AG series as an industry standard that all others will be compared to.

The AG03MK2 is equipped with a variety of physical controls including a large 60mm fader that helps you shape and manage the audio intuitively and quickly. The newly added mute button allows you to cut your mic input at a moment's notice if your situation demands it. Reverb and Mute can even be controlled by the optional FC5 foot switch, freeing up your hands for other tasks.

Flexible connectivity and LOOPBACK function expand your streaming capabilities
In addition to a microphone input for the condenser microphone of your choice, the AG03MK2 also features a 1/4 inch jack input for connecting a guitar or line instrument, and an upgraded 4-pole mini jack (TRRS) for smartphone input and output capabilities.

You can also use LOOPBACK function to play back the audio signal from a connected USB device to USB streaming output as with previous AG series mixers.

The AG03MK2 sees a marked improvement in sound quality as a result of adopting USB-C connectivity and enhanced internal circuitry that will take your streaming audio to a more professional level. The high transfer rate and power supply of USB-C provide more stable operation.

Regardless of your particular streaming application, you'll likely want to add some depth and dimension to the audio you're broadcasting to add professionalism to your streaming content. The AG03MK2 is equipped with optimized 1-TOUCH COMP/EQ and REVERB controls to dial in the sound that best suits your style, and an amp simulator to add authenticity and punch to your guitar input.

All these tools are processed by the internal DSP chip so there is no delay, making it particularly valuable for live streaming when real-time accuracy is crucial.

You also have the option to turn these effects off completely to capture pure, raw recordings through your favorite microphone for music/audio production that will be edited by an engineer later.

AG Controller software allows users to easily and precisely check and configure the DSP audio processing inside the AG. Offering two modes of operation, "Simple" and "Detail", AG Controller gives users of varying music production experience detailed management of their audio from any Windows/Mac or iOS device connected to the AG03MK2 via USB.

The sleek, slim, and compact body of the AG03MK2 can be placed on virtually any flat surface.

By combining it with the optional BMS-10A adaptor, it can be installed on a microphone stand. It can also be connected to a mobile battery to configure a minimalistic, mobile streaming station anywhere.

*For stable operation of the AG03MK2, a power supply of DC 5V 900mA or more is required.

*BMS-10A and mobile battery are sold separately.

The AG03MK2 comes bundled with Cubase AI music production software, as well as WaveLab Cast for audio production and editing. The AG03MK2 is also compatible with Rec'n'Share and Cubasis LE applications for iOS devices which are available free of charge from Yamaha and Steinberg to support and inspire your audio content creation.

Specifications

Inpur Channels
Mono[MIC/LINE]: 1 - Combo (Mic, +48 V phantom power / Line), 3.5 mm (1/8") stereo mini (Headset mic, Plug-in power) *CH1 input and Headset mic cannot be used simultaneously
Stereo[LINE]: 1 - Stereo Line / Guitar Input (Mono)
Smartphone: 1 - 4-pole mini input/output (TRRS)
USB: 1

Output Channels
PHONES: 1 - PHONES / HEADSET PHONES *Cannot be used simultaneously
Smartphone: 1 - 4-pole mini input/output (TRRS)
MONITOR OUT: 2 - L/R Stereo: Phone, RCA
USB: 1

Bus: 1 Stereo
Functions: MUTE button x 1, PAD button x 2, HI-Z button x 1, STREAMING OUT (DRY CH 1-2G / INPUT MIX / LOOPBACK), MIX MINUS MIC (ON / OFF)
On-board processors - DSP: COMP/EQ, REVERB (SPX Reverb), AMP SIM *Detail is operated on AG Controller
USB
USB Audio: 2 IN / 2 OUT, USB Audio Class 2.0 Compliant, Sampling Frequency: Max. 192 kHz, Bit Depth: 24-bit, Type-C
USB DC Power input: 1 - Type-C, 5 V DC, 900 mA

Power requirements: 5 V DC, 900 mA
Power consumption: Max. 4.5 W
Dimensions - W x H x D: 126 mm (5.0") x 63 mm (2.5") x 201 mm (7.9")
Net weight: 0.8 kg (1.8 lbs)
Included Accessories: USB2.0 Cable (1.5 m), Quick Guide, Safety Guide, Wavelab Cast Download Information, Cubase AI Download Information
Others: Operating Temperature: 0 to + 40C

Notes: Configuring a streaming setup from scratch can be a daunting task, particularly for users with little or no music production experience. The minimalist design of the AG01 takes this into account by combining a high-quality condenser microphone with DSP effects, a LOOPBACK function, flexible input connectivity, and a simple, intuitive mixer for stress-free streaming operation.

Simply connect to your computer or iOS/Android device along with the headphones of your choice, then set your levels and you've got a fully operational streaming station that can be up and running within minutes. If you're an aspiring live streamer that requires a compact yet comprehensive, high quality all-in-one solution, the AG01 is ready when you are.

In most streaming applications your microphone is likely to feature prominently onscreen so it is important for it to complement your overall vision. With a unique and iconic design that blends classic and contemporary aesthetics, the AG01 looks as good as it sounds, offering both black and white-based models to suit your preference.

In addition to the condenser microphone audio input, the AG01 is equipped with a mini stereo line input jack, and an upgraded 4-pole mini jack (TRRS) for smartphones that allows input and output. You can also add audio from devices connected via USB in LOOPBACK mode. Combined with these features, this microphone-type model can cover a wide variety of streaming styles that could not be achieved in the past without a separate mixing device.

The AG01's high-performance condenser microphone utilizes a cardioid polar pattern that captures your voice or musical instrument performance precisely, and converts it into high resolution audio (192kHz, 24bit) while blocking out unwanted ambient noise from the rear or sides.

The AG01 features high-quality DSP effects, allowing you to easily add COMP/EQ and REVERB to color and hone your audio and get the best sound possible to broadcast to your audience. What's more, these tools are processed by the internal DSP chip so there is no delay, making the AG01 particularly valuable for live streaming, when real-time accuracy is required.

You can also turn these effects off completely to capture pure, raw recordings of the AG01's condenser microphone for music/audio production that will be edited by an engineer later.

There are many situations in live streaming where you may need to make audio adjustments on the fly. The carefully configured physical controls of the AG01 respond to these needs providing a simple operating experience that won't detract from your live content or performances.

AG Controller offers two modes, "Simple" and "Detail," which allow users with varying degrees of audio engineering experience to easily and precisely check and adjust the AG's DSP processing from any Windows/Mac or iOS device connected via USB.

The AG01 can be easily placed on a desk or any flat surface with its dedicated stand, or mounted on a desk arm, making it adaptable to almost any environment.

It can also be used in combination with a mobile battery allowing you to take your fully functioning streaming station anywhere you like.

*For stable operation of the AG01, a power supply of DC 5V 900mA or more is required.

AG01 comes bundled with Cubase AI music production software, as well as WaveLab Cast for audio production and editing. The AG01 is also compatible with Rec'n'Share and Cubasis LE applications for iOS devices which are available free of charge from Yamaha and Steinberg to support and inspire your audio content creation.

Specifications

Microphone Unit: Back electret condenser type
Polar Pattern: Cardioid
Adress Type: Side
Frequency Response: 30 Hz - 20 kHz
Max Input SPL: 110 dB (THD - 1.0% at 1 kHz)
Sensitivity: -34 dB i 3 dB (0 dB=1 V/Pa, at 1 kHz)
Connector: USB Type-C

Input Channels
Microphone: 1 (Mono condenser microphone)
AUX: 1 - Stereo mini
Smartphone: 1 - 4-pole mini input/output (TRRS)
USB: 1

Output Channels
PHONES: 1 - Stereo mini
Smartphone: 1 - 4-pole mini input/output (TRRS)
USB: 1
Bus: 1 Stereo
Functions: MIC GAIN (HIGH / MID / LOW), MUTE button x 1, STREAMING OUT (MIC / INPUT MIX / LOOPBACK), MIX MINUS MIC (ON / OFF)

On-board processors
DSP: COMP/EQ, REVERB (SPX Reverb) *Detail is Controlled on AG Controller
USB Audio: 2 IN / 2 OUT, USB Audio Class 2.0 Compliant, Sampling Frequency: Max. 192 kHz, Bit Depth: 24-bit, Type-C
USB DC Power Input: 1 - Type-C, 5 V DC, 900 mA

General specifications
Power requirements 5 V DC, 900 mA
Power consumption Max. 4.5W
Dimensions: W: 116 mm (4.6") H: 281 mm (11.1") D: 118 mm (4.6")
Net weight: 1.2 kg (2.6 lbs)
Included accessories: USB 2.0 Cable (1.5 m), Quick Guide, Safety Guide, Wavelab Cast Download Information, Cubase AI Download Information
Others: Operating Temperature: 0 to + 40C

Notes: ***B-STOCK: Box damaged, product in perfect working order***


Configuring a streaming setup from scratch can be a daunting task, particularly for users with little or no music production experience. The minimalist design of the AG01 takes this into account by combining a high-quality condenser microphone with DSP effects, a LOOPBACK function, flexible input connectivity, and a simple, intuitive mixer for stress-free streaming operation.

Simply connect to your computer or iOS/Android device along with the headphones of your choice, then set your levels and you've got a fully operational streaming station that can be up and running within minutes. If you're an aspiring live streamer that requires a compact yet comprehensive, high quality all-in-one solution, the AG01 is ready when you are.

In most streaming applications your microphone is likely to feature prominently onscreen so it is important for it to complement your overall vision. With a unique and iconic design that blends classic and contemporary aesthetics, the AG01 looks as good as it sounds, offering both black and white-based models to suit your preference.

In addition to the condenser microphone audio input, the AG01 is equipped with a mini stereo line input jack, and an upgraded 4-pole mini jack (TRRS) for smartphones that allows input and output. You can also add audio from devices connected via USB in LOOPBACK mode. Combined with these features, this microphone-type model can cover a wide variety of streaming styles that could not be achieved in the past without a separate mixing device.

The AG01's high-performance condenser microphone utilizes a cardioid polar pattern that captures your voice or musical instrument performance precisely, and converts it into high resolution audio (192kHz, 24bit) while blocking out unwanted ambient noise from the rear or sides.

The AG01 features high-quality DSP effects, allowing you to easily add COMP/EQ and REVERB to color and hone your audio and get the best sound possible to broadcast to your audience. What's more, these tools are processed by the internal DSP chip so there is no delay, making the AG01 particularly valuable for live streaming, when real-time accuracy is required.

You can also turn these effects off completely to capture pure, raw recordings of the AG01's condenser microphone for music/audio production that will be edited by an engineer later.

There are many situations in live streaming where you may need to make audio adjustments on the fly. The carefully configured physical controls of the AG01 respond to these needs providing a simple operating experience that won't detract from your live content or performances.

AG Controller offers two modes, "Simple" and "Detail," which allow users with varying degrees of audio engineering experience to easily and precisely check and adjust the AG's DSP processing from any Windows/Mac or iOS device connected via USB.

The AG01 can be easily placed on a desk or any flat surface with its dedicated stand, or mounted on a desk arm, making it adaptable to almost any environment.

It can also be used in combination with a mobile battery allowing you to take your fully functioning streaming station anywhere you like.

*For stable operation of the AG01, a power supply of DC 5V 900mA or more is required.

AG01 comes bundled with Cubase AI music production software, as well as WaveLab Cast for audio production and editing. The AG01 is also compatible with Rec'n'Share and Cubasis LE applications for iOS devices which are available free of charge from Yamaha and Steinberg to support and inspire your audio content creation.

Specifications

Microphone Unit: Back electret condenser type
Polar Pattern: Cardioid
Adress Type: Side
Frequency Response: 30 Hz - 20 kHz
Max Input SPL: 110 dB (THD - 1.0% at 1 kHz)
Sensitivity: -34 dB i 3 dB (0 dB=1 V/Pa, at 1 kHz)
Connector: USB Type-C

Input Channels
Microphone: 1 (Mono condenser microphone)
AUX: 1 - Stereo mini
Smartphone: 1 - 4-pole mini input/output (TRRS)
USB: 1

Output Channels
PHONES: 1 - Stereo mini
Smartphone: 1 - 4-pole mini input/output (TRRS)
USB: 1
Bus: 1 Stereo
Functions: MIC GAIN (HIGH / MID / LOW), MUTE button x 1, STREAMING OUT (MIC / INPUT MIX / LOOPBACK), MIX MINUS MIC (ON / OFF)

On-board processors
DSP: COMP/EQ, REVERB (SPX Reverb) *Detail is Controlled on AG Controller
USB Audio: 2 IN / 2 OUT, USB Audio Class 2.0 Compliant, Sampling Frequency: Max. 192 kHz, Bit Depth: 24-bit, Type-C
USB DC Power Input: 1 - Type-C, 5 V DC, 900 mA

General specifications
Power requirements 5 V DC, 900 mA
Power consumption Max. 4.5W
Dimensions: W: 116 mm (4.6") H: 281 mm (11.1") D: 118 mm (4.6")
Net weight: 1.2 kg (2.6 lbs)
Included accessories: USB 2.0 Cable (1.5 m), Quick Guide, Safety Guide, Wavelab Cast Download Information, Cubase AI Download Information
Others: Operating Temperature: 0 to + 40C

Notes: Configuring a streaming setup from scratch can be a daunting task, particularly for users with little or no music production experience. The minimalist design of the AG01 takes this into account by combining a high-quality condenser microphone with DSP effects, a LOOPBACK function, flexible input connectivity, and a simple, intuitive mixer for stress-free streaming operation.

Simply connect to your computer or iOS/Android device along with the headphones of your choice, then set your levels and you've got a fully operational streaming station that can be up and running within minutes. If you're an aspiring live streamer that requires a compact yet comprehensive, high quality all-in-one solution, the AG01 is ready when you are.

In most streaming applications your microphone is likely to feature prominently onscreen so it is important for it to complement your overall vision. With a unique and iconic design that blends classic and contemporary aesthetics, the AG01 looks as good as it sounds, offering both black and white-based models to suit your preference.

In addition to the condenser microphone audio input, the AG01 is equipped with a mini stereo line input jack, and an upgraded 4-pole mini jack (TRRS) for smartphones that allows input and output. You can also add audio from devices connected via USB in LOOPBACK mode. Combined with these features, this microphone-type model can cover a wide variety of streaming styles that could not be achieved in the past without a separate mixing device.

The AG01's high-performance condenser microphone utilizes a cardioid polar pattern that captures your voice or musical instrument performance precisely, and converts it into high resolution audio (192kHz, 24bit) while blocking out unwanted ambient noise from the rear or sides.

The AG01 features high-quality DSP effects, allowing you to easily add COMP/EQ and REVERB to color and hone your audio and get the best sound possible to broadcast to your audience. What's more, these tools are processed by the internal DSP chip so there is no delay, making the AG01 particularly valuable for live streaming, when real-time accuracy is required.

You can also turn these effects off completely to capture pure, raw recordings of the AG01's condenser microphone for music/audio production that will be edited by an engineer later.

There are many situations in live streaming where you may need to make audio adjustments on the fly. The carefully configured physical controls of the AG01 respond to these needs providing a simple operating experience that won't detract from your live content or performances.

AG Controller offers two modes, "Simple" and "Detail," which allow users with varying degrees of audio engineering experience to easily and precisely check and adjust the AG's DSP processing from any Windows/Mac or iOS device connected via USB.

The AG01 can be easily placed on a desk or any flat surface with its dedicated stand, or mounted on a desk arm, making it adaptable to almost any environment.

It can also be used in combination with a mobile battery allowing you to take your fully functioning streaming station anywhere you like.

*For stable operation of the AG01, a power supply of DC 5V 900mA or more is required.

AG01 comes bundled with Cubase AI music production software, as well as WaveLab Cast for audio production and editing. The AG01 is also compatible with Rec'n'Share and Cubasis LE applications for iOS devices which are available free of charge from Yamaha and Steinberg to support and inspire your audio content creation.

Specifications

Microphone Unit: Back electret condenser type
Polar Pattern: Cardioid
Adress Type: Side
Frequency Response: 30 Hz - 20 kHz
Max Input SPL: 110 dB (THD - 1.0% at 1 kHz)
Sensitivity: -34 dB i 3 dB (0 dB=1 V/Pa, at 1 kHz)
Connector: USB Type-C

Input Channels
Microphone: 1 (Mono condenser microphone)
AUX: 1 - Stereo mini
Smartphone: 1 - 4-pole mini input/output (TRRS)
USB: 1

Output Channels
PHONES: 1 - Stereo mini
Smartphone: 1 - 4-pole mini input/output (TRRS)
USB: 1
Bus: 1 Stereo
Functions: MIC GAIN (HIGH / MID / LOW), MUTE button x 1, STREAMING OUT (MIC / INPUT MIX / LOOPBACK), MIX MINUS MIC (ON / OFF)

On-board processors
DSP: COMP/EQ, REVERB (SPX Reverb) *Detail is Controlled on AG Controller
USB Audio: 2 IN / 2 OUT, USB Audio Class 2.0 Compliant, Sampling Frequency: Max. 192 kHz, Bit Depth: 24-bit, Type-C
USB DC Power Input: 1 - Type-C, 5 V DC, 900 mA

General specifications
Power requirements 5 V DC, 900 mA
Power consumption Max. 4.5W
Dimensions: W: 116 mm (4.6") H: 281 mm (11.1") D: 118 mm (4.6")
Net weight: 1.2 kg (2.6 lbs)
Included accessories: USB 2.0 Cable (1.5 m), Quick Guide, Safety Guide, Wavelab Cast Download Information, Cubase AI Download Information
Others: Operating Temperature: 0 to + 40C