安全购物

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

安全购物

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Format: All Vinyl CD DJ Equipment Studio Equipment
View:
Options
Items 1 to 50 of 2,774 on page 1 of 56
1  2  3  ...  56  »
FORTHCOMING
Doepfer A-180-2v Multiples Module (vintage edition) Doepfer A-180-2v Multiples Module (vintage edition) Doepfer A-180-2v Multiples Module (vintage edition)
Cat: 751717 • View all Synth modules
 
Passive multi-port distributor - 2HP
Notes: 2HP narrow version of the A-180 multiples module. It is a passive signal splitter suitable for audio or CVs. Two sets of four jacks are interconnected, by placing a solder bridge you can connect all eight jacks.
Read more
coming soon $38.36
FORTHCOMING
Doepfer A-183-1 Dual Attenuator Module Doepfer A-183-1 Dual Attenuator Module Doepfer A-183-1 Dual Attenuator Module
Cat: 751728 • View all Synth modules
 
Dual passive attenuator - 4HP
Notes: Module A-183-1 is a simple passive dual attenuator. Passive means, that each unit is made of two sockets and a 50k linear potentiometer only. There are no active parts like amplifiers or buffers and no power supply is required.

This is how the A-183-1 works: At the output socket appears the attenuated input signal, i.e. zero level at the fully CCW position and max. level and the fully CW position.

Applications:

Adjustable level of CV or audio signals to control other modules that do not have attenuators (e.g. Dual VCA A-132-1, Quantizer A-156, CV-to-Midi interface A-192 and modules of other manufacturers).
Read more
coming soon $39.98
FORTHCOMING
Doepfer A-183-2 Voltage Offset Generator & Attenuator/Polarizer Module Doepfer A-183-2 Voltage Offset Generator & Attenuator/Polarizer Module Doepfer A-183-2 Voltage Offset Generator & Attenuator/Polarizer Module
Cat: 751731 • View all Synth modules
 
Compact module for attenuating control voltage signals - 4HP
Notes: Module A-183-2 is a voltage offset generator combined with an attenuator/polarizer.

This is how the A-183-2 works: At the two output sockets (simply two connected sockets) appears a DC voltage that is adjusted with the Offset control in the range 0...+5V or -5V...+5V. An internal jumper is used to select the offset range (0...+5V or -5V...+5V). Other ranges are possible by changing a resistor on the pc board (e.g. 0...+10V or -10V...+10V). The DC voltage generated by the Offset control is overlaid by the attenuated voltage that is fed to the In socket. The function of the attenuator control can be set to Attenuator or Polarizer by means of a toggle switch. When the switch is in the Attenuator position the control works as an usual attenuator, i.e. zero level at the fully CCW position and max. level and the fully CW position. When the switch is in the Polarizer position the control works as a polarizer, i.e. zero level appears at the centre position. Right from the centre position the In signal is added to the offset voltage, left from the centre position the In signal is subtracted from the offset voltage. In other words: at the fully CW position the non-inverted In signal is added with the full level to the offset voltage, at the fully CCW position the inverted In signal is added with the full level to the offset voltage.

The amplification range for the input is about 0...+1 in the attenuator mode, and -1...+1 in the polarizer mode. The amplification range can be modified by replacing a resistor by another value.

Applications:

Generation of adjustable DC voltages overlaid by control voltages with adjustable level and polarity to control other modules that do not have attenuators or offset controls, e.g. Sampler A-112 (mainly for the wavetable mode), dual VCA A-132-1, VCLFO A-147-2 for waveshaping and ring modulator applications, Quantizer A-156, Theremin A-178, CV-to-Midi interface A-192 and modules of other manufacturers).
Read more
coming soon $45.39
FORTHCOMING
Doepfer A-183-3 Amplifier Module Doepfer A-183-3 Amplifier Module Doepfer A-183-3 Amplifier Module
Cat: 751740 • View all Synth modules
 
DC coupled amplifier - 4HP
Notes: Module A-183-3 is a simple amplifier. It is DC coupled and can be used for both CV and audio signals. The maximal amplification can be switched between 1, 2 and 4 (in position 1 the module does not work as a real amplifier but only as attenuator). The level can be adjusted by means of the Level control between zero and the chosen maximum amplification (1/2/4). Two overload LEDs indicate if the output signal goes beyond about +10V or becomes less than about -10V. Input and output are equipped with miniature 2-fold multiples (nothing but 2 connected sockets).

The main application of this module is to adapt differing audio or CV levels between different modules or systems. For example, LFO, ADSR or Gate levels between modules of different manufacturers can be increased or attenuated. But even audio signals can be attenuated or amplified up to 4. But the module cannot be used as an amplifier for external low level audio signals (e.g. microphones or electric guitars)!
Read more
coming soon $44.31
FORTHCOMING
Doepfer A-180-3 Dual Buffered Multiple Module Doepfer A-180-3 Dual Buffered Multiple Module Doepfer A-180-3 Dual Buffered Multiple Module
Cat: 751720 • View all Synth modules
 
Dual buffered 1-in-3 multiple module - 4HP
Notes: Module A-180-3 is a dual buffered 1-in-3 multiple. The signal applied to the input socket appears as a buffered signal at the three output sockets. Each output has its own buffer, i.e. the three output sockets are not simply connected to each other. The lower output of the upper unit is normalled in the factory to the input of the lower unit. That way the module works as a single 1-in-6 buffered multiple provided that no signal is applied to the input of the lower unit. But it's also possible to pick-up the bus CV and normalize the input socket of the lower unit to the bus CV.

Application: copying/buffering of CV, gate and audio signals.
Read more
coming soon $49.71
FORTHCOMING
Doepfer A-170v Dual Slew Limiter Module (vintage edition) Doepfer A-170v Dual Slew Limiter Module (vintage edition) Doepfer A-170v Dual Slew Limiter Module (vintage edition)
Cat: 751702 • View all Synth modules
 
Two separate slew limiters for generating portamento effects - 8HP
Notes: Module A-170 contains two separate slew limiters, also known as portamento controllers or integrators. The first SL has just one joint control, which sets both rise and fall times (c. 0 ...10 sec). The second SL has separate controls for rise and fall times, and can therefore be used as a simple AR envelope generator. Over and above this, you can set the overall range for these parameters, with a three-position switch, as on the full ADSRs.

Both slew limiters have two LEDs each, to show the state of the rising and falling voltages.


Additional technical remarks: If the upper slew limiter is used for precision applications (e.g. portamento/glide of one or more VCOs) a buffer (e.g. A-185-1 or A-185-2) is recommended between the A-170 output and the VCO(s) input(s). The reason is a small voltage drop that is caused by the protection resistor at the A-170 output. An A-185-1 or A-185-2 connected between the A-170 and the VCO(s) avoids that voltage loss. For all A-170 manufactured later than May 2009 (recognizable by the label "Version 2" on the pc board) this remark is not valid as these modules are equipped with an additional voltage buffer at the output.

The lower slew limiter cannot be used for precision applications because of the voltage loss caused by the diodes of the circuit.
Read more
coming soon $77.81
FORTHCOMING
Doepfer A-172 Maximum/Minimum Selector & Rectifier Module Doepfer A-172 Maximum/Minimum Selector & Rectifier Module Doepfer A-172 Maximum/Minimum Selector & Rectifier Module
Cat: 751706 • View all Synth modules
 
Module for processing/mixing of control voltages - 4HP
Notes: A-172 is a minimum/maximum selector module and is equipped with four analogue inputs and two analogue outputs (minimum, maximum). The main application of the module is the processing/mixing of control voltages, e.g. random voltages, ADSR, LFO, S&H, ribbon CV, theremin-CV and similar, but even for audio signal processing the module can be used (e.g. several outputs of the same or different VCOs).

The module permanently picks the maximum resp. minimum voltage out of the four input signals and outputs these voltages to the maximum resp. minimum jack socket.

To adjust offset and amplitude for each input independently (i.e. to bring the signal into the right "position" with the desired level) we recommend combining the module with the A-129-3 Slew Limiter/Attenuator/Offset Generator (see patch example below). The other sketch below shows the basic principle of the max/min module by means of three sine waves (e.g. three LFOs) with different frequencies and different levels.

The module can be used also as a simple half-wave rectifier.
Read more
coming soon $51.06
FORTHCOMING
Doepfer A-174-2 Modulation Wheels CV Source Module Doepfer A-174-2 Modulation Wheels CV Source Module Doepfer A-174-2 Modulation Wheels CV Source Module
Cat: 751707 • View all Synth modules
 
Modulation wheel module with two wheels - 14HP
Notes: A-174-2 is a modulation wheel module with two wheels. The factory setting is a spring loaded wheel at the left side with bipolar voltage output (i.e. 0V in centre position, positive voltage in the upper range, negative voltage in the lower range, voltage range about -5.5 V ... 0V ... +5.5 V) and a wheel without spring at the right side with positive voltage output (i.e. 0V in the lowest position and positive voltage when operated, voltage range about 0...+8 V). For the spring loaded wheel a voltage "plateau" around 0 V is preset (jumper) so that the output voltage is 0 V in a small area near the centre position.

By means of jumpers the factory settings can be changed. For each wheel two jumpers are available: one for the voltage range (positive or bipolar) and one for the voltage plateau around 0 V. If these settings are changed even the wheels have to be re-adjusted mechanically. Therefore, such modifications should be carried out by a qualified person only. By request the module is available from the factory even with two wheels both with or without springs (additional charges Euro 10.00 for each change).

Important note for module mounting: As the potentiometer of the left wheel projects about 10 mm the rim of the front panel a 2 or 4 HP blind panel has to be mounted left from the module - unless the module left to the A-174-1 has sufficient space in this area (e.g. A-174-1).
Read more
coming soon $77.81
FORTHCOMING
Doepfer A-177-2 External Foot Controller II Module Doepfer A-177-2 External Foot Controller II Module Doepfer A-177-2 External Foot Controller II Module
Cat: 751715 • View all Synth modules
 
Foot controller interface - 8HP
Notes: Economically priced module for connecting one foot controller and one double foot switch for control A-100 functions by means of the feet. For example, the frequency of a filter or the loudness can be controlled by a foot controller, but even other parameters like LFO frequency, modulation depth, phasing, pitch or any other voltage controlled parameter. The gate outputs controlled by the double foot switch can be used e.g. to trigger an envelope generator or to start/stop a sequencer. Even a single foot switch can be used if only one gate signal is required.

A special application of the A-177-2 is the usage within a Trautonium replica. The foot switches can be used to switch the mixtures of the subharmonic oscillator A-113. The foot controller can be used to control the overall loudness in combination with a VCA.

A-177 is compatible with the foot controllers FP5 and double foot switch VFP2. The Foot controller and double foot switch are not included with the module. If you want to use another foot controller or foot switch it has to be compatible to FP5 or VFP2.

If the foot controller FP5 is used the CV output range is about 0...+8V. The gate output levels are 0/+12V in combination with the VFP2 (foot switch not operated = 0V, foot switch operated = +12V).
Read more
coming soon $52.95
FORTHCOMING
Doepfer A-178 Theremin Control Voltage Source Module Doepfer A-178 Theremin Control Voltage Source Module Doepfer A-178 Theremin Control Voltage Source Module Doepfer A-178 Theremin Control Voltage Source Module
Cat: 751716 • View all Synth modules
 
Theremin controller module - 8HP
Notes: Theremin module for generating a variable control voltage by approaching/removing hand to/from an antenna. The distance range is about 30-40 cm. Additionally the module is equipped with a Gate output with adjustable threshold level. Controls/Inputs/Outputs: antenna input, offset (knob for zero adjust), 2 x CV out, 2 x LED (for CV control positive/negative and zero offset adjust).

To simulate the original Theremin two A-178, a VCO (e.g. A-110) and a linear VCA (e.g. A-130 or A-132) are required. But of course the A-178 can be used to control other functions in the A-100 (e.g. filter frequency, modulation depth and/or speed, tempo, attack/decay time and so on).

The CV output voltage of the A-178 can range - according to the setting of the front panel controls - from -10V...+10V. The gate output switches from 0V to about +10V.

Applications:

- Controlling any voltage controlled parameter of the A-100, e.g. pitch or pulsewidth (VCO A-110), loudness (VCA A-130/131/132), panorama (A-134), filter frequency or resonance (A-120/121/122/123), phasing (A-125), frequency shift (A-126), resonance peaks (A-127), envelope parameters (A-141/142), tempo (A-147)

- Triggering of A-100 activities via gate with adjustable threshold, e.g. starting an envelope (A-140/141/142), Start/Stop of a sequence (A-155), any switching function (A-150/151)

- Conversion into MIDI control change messages is possible with the A-192.

If two or more A-178 are used the distance between the modules/antennas should be at least 40-50 cm. Otherwise the antennas may affect each other.
Read more
coming soon $96.18
FORTHCOMING
Doepfer A-185-2 Precision Control Voltage Adder & Buffer Module Doepfer A-185-2 Precision Control Voltage Adder & Buffer Module Doepfer A-185-2 Precision Control Voltage Adder & Buffer Module
Cat: 751763 • View all Synth modules
 
Precision adder (mixer) and buffer for control voltages - 6HP
Notes: Module A-185-2 is a precision control voltage adder/buffer. Precision means that the amplification of the inputs without attenuators is exactly 1.00 and is suitable to add control voltages for the pitch control of VCOs (e.g. from keyboard + sequencer 1 + sequencer 2). Summing resistors matched to 0.1% are used to obtain an accuracy of 0.1% for the added voltages.

The module is equipped with four CV inputs: one with attenuator and three without attenuator. Each input is normalled to +1 V (i.e. if no plug is inserted the input contributes 1 V to the sum appearing at the output).

The input with attenuator can be used for common modulations (e.g. from an LFO, ADSR, Theremin, Pitch-Bender) for all VCOs connected to the output. The Lev.1 control is used to adjust the depth of the modulation, the first switch selects the polarity of the modulation. If no signal is connected to the first socket the attenuator works as a (fine) tuning knob because a voltage in the range 0...+1V (right position of the switch) or 0...-1V (left position of the switch) is added to the CV output.

The inputs without attenuators are planned to add control voltages coming out of keyboards, sequencers, Midi-to-CV interfaces, ribbon controllers or other CV sources that follow the 1V/oct standard. For example the CV of a keyboard can be used to transpose the CV coming from a sequencer, or the CV of a slow sequencer can be used to transpose the CV from a fast sequencer.

Each input is equipped with a three-position switch that determines if the corresponding voltage is added (right position), subtracted (left position) or if the input has no effect (centre position). If no plug is inserted the corresponding switch works as an octave switch for the lower three sections as the default 1 V are added or subtracted to the output voltage according to the switch position. The first switch can be used to add a variable voltage to the sum output. The variable voltage is adjusted with the Lev.1 control and the knob works then as kind of a (fine) tuning control.

The module is equipped with 4 outputs: three non-inverting and one inverting ouput. An internal jumper can be used to connect the non-inverted or inverted output to the CV line of the A-100 bus. That way the module can used to control several VCOs that are connected to the same bus board as the A-185-2 (same functionality as A-185-1).
Read more
coming soon $72.40
FORTHCOMING
Doepfer A-185-2v Precision Control Voltage Adder & Buffer Module (vintage edition) Doepfer A-185-2v Precision Control Voltage Adder & Buffer Module (vintage edition) Doepfer A-185-2v Precision Control Voltage Adder & Buffer Module (vintage edition)
Cat: 751764 • View all Synth modules
 
Precision adder (mixer) and buffer for control voltages - 6HP
Notes: Module A-185-2 is a precision control voltage adder/buffer. Precision means that the amplification of the inputs without attenuators is exactly 1.00 and is suitable to add control voltages for the pitch control of VCOs (e.g. from keyboard + sequencer 1 + sequencer 2). Summing resistors matched to 0.1% are used to obtain an accuracy of 0.1% for the added voltages.

The module is equipped with four CV inputs: one with attenuator and three without attenuator. Each input is normalled to +1 V (i.e. if no plug is inserted the input contributes 1 V to the sum appearing at the output).

The input with attenuator can be used for common modulations (e.g. from an LFO, ADSR, Theremin, Pitch-Bender) for all VCOs connected to the output. The Lev.1 control is used to adjust the depth of the modulation, the first switch selects the polarity of the modulation. If no signal is connected to the first socket the attenuator works as a (fine) tuning knob because a voltage in the range 0...+1V (right position of the switch) or 0...-1V (left position of the switch) is added to the CV output.

The inputs without attenuators are planned to add control voltages coming out of keyboards, sequencers, Midi-to-CV interfaces, ribbon controllers or other CV sources that follow the 1V/oct standard. For example the CV of a keyboard can be used to transpose the CV coming from a sequencer, or the CV of a slow sequencer can be used to transpose the CV from a fast sequencer.

Each input is equipped with a three-position switch that determines if the corresponding voltage is added (right position), subtracted (left position) or if the input has no effect (centre position). If no plug is inserted the corresponding switch works as an octave switch for the lower three sections as the default 1 V are added or subtracted to the output voltage according to the switch position. The first switch can be used to add a variable voltage to the sum output. The variable voltage is adjusted with the Lev.1 control and the knob works then as kind of a (fine) tuning control.

The module is equipped with 4 outputs: three non-inverting and one inverting ouput. An internal jumper can be used to connect the non-inverted or inverted output to the CV line of the A-100 bus. That way the module can used to control several VCOs that are connected to the same bus board as the A-185-2 (same functionality as A-185-1).
Read more
coming soon $79.97
FORTHCOMING
Doepfer A-184-1v Ring Modulator, Sample & Hold, Track & Hold, & Slew Limiter Module (vintage edition) Doepfer A-184-1v Ring Modulator, Sample & Hold, Track & Hold, & Slew Limiter Module (vintage edition) Doepfer A-184-1v Ring Modulator, Sample & Hold, Track & Hold, & Slew Limiter Module (vintage edition)
Cat: 751757 • View all Synth modules
 
4HP Eurorack module featuring a combination of 3 functions
Notes: Module A-184-1 is the combination of three functions:

- Ring Modulator
- Sample&Hold/Track&Hold unit
- Slew Limiter

The same functions are actually already available in other modules (e.g. A-114, A-148, A-170). But in many systems it's not necessary to have two ring modulators (A-114) or two S&H units (A-148) or two slew limiters (A-170) available. That's why we have compiled these function in one small 4 HP module.

The upper section is nothing but half of an A-114, i.e. a ring modulator with the usual X/Y inputs and the X*Y output. Inputs and outputs of this sub-unit are AC coupled, i.e. suitable only for audio signals. A detailed explanation of a ring modulator can be found on the A-114 info page.

The lower section is a Sample & Hold (S&H) / Track & Hold (T&H) unit (same as half of an A-148) followed by a slew limiter (same as the upper section the A-170). A toggle switch is used to set the mode to S&H or T&H. In S&H mode the unit picks out a sample from the voltage at the SH input at the rising edge of the trigger signal input. In T&H mode the output follows the input voltage as long as the level of the trigger signal is high. As soon as the trigger signal turns low, the last voltage is stored. The trigger input is internally normalled to high, i.e. the unit works just as a slew limiter in T&H mode when no trigger signal is applied.
Read more
coming soon $106.99
FORTHCOMING
Doepfer A-184-2 Voltage Controlled Crossfader & Triangle To Sine Waveshaper Module Doepfer A-184-2 Voltage Controlled Crossfader & Triangle To Sine Waveshaper Module Doepfer A-184-2 Voltage Controlled Crossfader & Triangle To Sine Waveshaper Module
Notes: Module A-184-2 is the combination of two functions and planned primarily as an expansion module for VCOs or LFOs (e.g. A-110-1, A-110-2, A-145, A-147-2).

Triangle-to-Sine Waveshaper:

The upper section is a very precise triangle-to-sine converter (thanks to Tim Stinchcombe who recommended this circuit). It can be used to convert any triangle waveform into a (nearly) perfect sine. The converter is much better than the simple diode converter used in the A-110-1, A-111-1, A-145 and A-147-2. Two trimming potentiometers are used to optimize the sine shape. The converter should be assigned to one VCO or LFO because the trimming potentiometers have to be re-adjusted if the input level or DC offset of the input signal changes. If the trimming potentiometers are deliberately mis-adjusted it can be used also as a waveshaper for non-sine waveforms (e.g. sine-shaped at the top of the signal and a peak at the bottom, even voltage controlled by applying an additional voltage to the waveshaping circuit, "circuit-bending" notes will be available).

The waveform converter is DC coupled and can be used also for low frequencies (e.g. LFO triangle waves).

Voltage Controlled Crossfader:

The lower section is a voltage controlled crossfader. It has two inputs A and B. The two signals are mixed together with variable percentage. When the manual control CF is fully CCW only signal A appears at the CF Out socket. When the manual control CF is fully CW only signal B appears at the CF Out socket. In the centre position of the manual control both signal appear with the same level. In addition a control voltage input CV with attenuator is available to enable voltage control of the crossfade.

Two LEDs display the crossfading shares of input A and B.

The crossfader uses two high quality VCAs (SSM2164). Inputs and outputs are DC coupled. Consequently it can be used for audio signals and slowly varying control voltages as well.

The sockets of the upper section (triangle and sine) are normalled to the inputs A and B of the crossfader section. That way the crossfader is used to fade between triangle and sine of the VCO or LFO connected to the waveshaper. If other signals are plugged into the input sockets A and B these signals are used for crossfading.

The main application is to fade between two different waveforms of a VCO or LFO or two different VCF outputs. But the module can be used for any other signals too as the waveshaper and crossfader sections are independent apart from the normalled sockets.
Read more
coming soon $81.59
FORTHCOMING
Doepfer A-185-1 Active Bus Access Module
Cat: 751760 • View all Synth modules
 
Provides input & output access to your Eurorack's internal CV/Gate bus
Notes: Active bus access module to feed CV and Gate into the A-100 bus (e.g. when using more than one frame or with external CV/Gate interfaces). Miniature jack sockets for CV In, Gate In, 2xCV Out, 2xGate Out, 2 LEDs for CV/Gate control

In general, the A-185 is recommended as soon as more than 2 VCO's (A-110, A-111) are controlled by the same control voltage source. Without interconnection of the A-185 in this case tuning inaccuracies (scale) may occur. The A-185 is mounted close to the VCOs. The controlling voltage for all VCOs is applied to the CV In socket of the A-185. By means of the CV line of the bus board the CV is connected to all VCOs at the same bus board.
Read more
coming soon $52.95
FORTHCOMING
Doepfer A-170 Dual Slew Limiter Module Doepfer A-170 Dual Slew Limiter Module Doepfer A-170 Dual Slew Limiter Module
Cat: 751699 • View all Synth modules
 
Two separate slew limiters for generating portamento effects - 8HP
Notes: Module A-170 contains two separate slew limiters, also known as portamento controllers or integrators. The first SL has just one joint control, which sets both rise and fall times (c. 0 ...10 sec). The second SL has separate controls for rise and fall times, and can therefore be used as a simple AR envelope generator. Over and above this, you can set the overall range for these parameters, with a three-position switch, as on the full ADSRs.

Both slew limiters have two LEDs each, to show the state of the rising and falling voltages.


Additional technical remarks: If the upper slew limiter is used for precision applications (e.g. portamento/glide of one or more VCOs) a buffer (e.g. A-185-1 or A-185-2) is recommended between the A-170 output and the VCO(s) input(s). The reason is a small voltage drop that is caused by the protection resistor at the A-170 output. An A-185-1 or A-185-2 connected between the A-170 and the VCO(s) avoids that voltage loss. For all A-170 manufactured later than May 2009 (recognizable by the label "Version 2" on the pc board) this remark is not valid as these modules are equipped with an additional voltage buffer at the output.

The lower slew limiter cannot be used for precision applications because of the voltage loss caused by the diodes of the circuit.
Read more
coming soon $62.68
FORTHCOMING
Doepfer A-175 Dual Voltage Inverter Module Doepfer A-175 Dual Voltage Inverter Module Doepfer A-175 Dual Voltage Inverter Module
Cat: 751709 • View all Synth modules
 
Two identical inverters - 4HP
Notes: Module A-175 (Dual Voltage Inverter) is exactly what it says it is: two identical inverters, which will take a voltage and output it in an inverted form - so that an input of +5 V will be output as -5 V, an input of -2 V will be output as +2 V, and so on. Two LEDs give a visual indication of the (positive or negative) output signal.
Read more
coming soon $52.95
FORTHCOMING
Doepfer A-176 Control Voltage Source Module Doepfer A-176 Control Voltage Source Module Doepfer A-176 Control Voltage Source Module
Cat: 751711 • View all Synth modules
 
Three independent voltage sources - 8HP
Notes: Module A-176 (Control Voltage Source) provides three voltage sources, to use wherever an extra CV is required. The top two voltage sources (CV 1 and CV 2) have controls for coarse and fine control of the voltage output; the third source (CV 3) just has the one control.

The range of the voltages output can be preset, either to 0 to +5 V or to -2.5 V to +2.5 V depending on your likely requirements. There is a jumper on the circuit board for each of the three voltage sources.

A typical use for the module would be to provide fine as well as coarse tuning for an A-110 standard VCO, (which, unlike the A-111, only has one tune control).

In general, this module will be useful whenever you need a manually controllable CV on a module which doesn't itself have a built-in control.
Read more
coming soon $62.68
FORTHCOMING
Doepfer A-186-1 Gate & Trigger Combiner & Rectifier Module Doepfer A-186-1 Gate & Trigger Combiner & Rectifier Module Doepfer A-186-1 Gate & Trigger Combiner & Rectifier Module
Cat: 751765 • View all Synth modules
 
Gate/trigger combiner - 4HP
Notes: Module A-186-1 is a very simple, passive unit that combines up to 7 gate, trigger or analog signals by or-wiring.

Function:

- If all seven inputs are low or open the output is low
- If one or more of the seven inputs is "high" the output turns high

Applications:

- Combination ("or"-wiring) of gate and/or trigger signals (e.g. from LFOs, sequencers, keyboards, Midi-to-CV interfaces, ribbon controller, theremin, trigger delays or any other source of gate/trigger signals
- Maximum extractor for analog voltages: at the output the maximum voltage (minus ~ 0.7V because of the diodes) appears, similar function as the maximum output of the A-172 Maximum/Minimum Selector module, e.g. for simple waveshaping
- Simple half-wave rectifier
Read more
coming soon $45.39
FORTHCOMING
Doepfer A-171-2v Voltage Controlled Slew Processor & Generator Module (vintage edition) Doepfer A-171-2v Voltage Controlled Slew Processor & Generator Module (vintage edition) Doepfer A-171-2v Voltage Controlled Slew Processor & Generator Module (vintage edition)
Notes: Module A-171-2 is a voltage controlled slew limiter with a lot of additional features beyond a simple slew limiter. It's mostly a licensed copy of Ken Stones VCS which is in turn based on the Serge VCS.

Typical applications:

- VC Slew Limiter / VC Portamento / VC Low Pass Gate:

Cycle switch = off, no trigger signal applied to Trig socket: Voltage controlled Slew limiter or portamento generator: the signal applied to the signal input is "slewed". The slew up and down times are controlled manually by means of the Up and Down controls, the effect of the CV Up and CV Down control voltages are controlled by the CV Up and CV Down controls, in exponential mode these controls also affect the slew shape (see symbols at the CCW and CW positions of the controls).

If an audio signal is applied an short slew rates are chosen the module works as a simple VCF/VCA combo.

- A/D Envelope Generator / Pulse Delay / Subharmonic Generator:

Cycle switch = off, trigger signal applied to Trig socket, no input signal: Simple Attack/Decay envelope Generator, the rise and fall times are controlled like the slew up/down times above, including the shape of the falling/rising slope of the envelope, the exp. CV input can be used to change both attack and decay simultaneously.

At the End output a pulse appears as the end of the envelope is reached (less than about 20mV), this can be used as a pulse delay.

If a series of triggers are applied to the VCS faster than the total rise and fall times, the module will divide the incoming signal by a whole number. In the audio range the output will be the sub-harmonic series.

- VCLFO / VCO:

Cycle switch = on, no trigger signal applied to Trig socket, no input signal: Voltage controlled LFO/VCO, the rise and fall times of the waveform are controlled like the slew up/down times above, including the shape of the falling/rising slope
the exp. CV input can be used like the CV input of a VCO or VCLFO, the response is exponential but not exactly 1V/oct.
Read more
coming soon $136.16
FORTHCOMING
Doepfer A-187-1 Voltage Controlled DSP Effects Module
Cat: 751766 • View all Synth modules
 
DSP based effects module - 18HP
Notes: Module A-187-1 is a DSP based effects module. Four parameters of the selected digital effect are voltage controlled. The main effect (e.g. reverb, delay, pitch-shifter, equalizer) is selected by the two small buttons effect up/down. The upper row of the display shows the effect that is currently selected. In the lower row the four parameters are shown as well as a small bar left from the abbreviation that displays the current parameter value. Each parameter can be adjusted manually (upper potentiometer row) and modified by external control voltages (lower row of the potentiometers and upper row of the sockets). The lower row of the sockets contains the two audio inputs and outputs.

Another button (bypass) is used to turn the effect on/off. When bypass is chosen the upper line of the display shows in turn "BYPASS" and the name of the pre-selected effect. In the bypass mode another effect can be pre-selected and called-up by pressing the bypass button again. Even the effect parameters can be adjusted and are displayed with the bar graphs. But they become effective not before the bypass mode is left.

The module is equipped with two audio inputs and two audio outputs because the DSP board features stereo audio processing. The audio inputs can process usual A-100 signal levels without clipping/distortion. For higher levels external attenuators (e.g. A-183-1) or VCAs may be used.

A ready-made DSP board is used inside the A-187-1 module. Consequently, only these effects and parameters are available that are supported by the DSP module. Some parameters can be changed only in steps or with audible artefacts. The DSP board has 20 Bit DA and AD converter with 32 kHz sample rate available. The inter sound processing uses 24 Bit.
Read more
coming soon $262.60
FORTHCOMING
Doepfer A-181 Multiples 2 Module Doepfer A-181 Multiples 2 Module Doepfer A-181 Multiples 2 Module
Cat: 751722 • View all Synth modules
 
Two multiples with one 1/4 jack socket & two 3.5mm jack sockets each
Notes: Doepfer's A-181 Multiples 2 is a simple multiple and cable format converter, suitable for translating 1/4" signals to 1/8" and vice versa. The upper mult is wired for monophonic signals, while the lower mult features a 1/4" stereo connector which offers direct 1/8" connection to the tip and ring, respectively, allowing use as a stereo splitter or dual 1/8" to stereo 1/4" converter.
Read more
coming soon $45.39
FORTHCOMING
Doepfer A-182-1 Switched Multiples Module Doepfer A-182-1 Switched Multiples Module Doepfer A-182-1 Switched Multiples Module
Cat: 751724 • View all Synth modules
 
Eurorack passive multi-connector - 6HP
Notes: Module A-182-1 is a simple passive multi-connector similar to the multiples modules A-180-1/A-180-2. In contrast to modules A-180-1/2 each socket is equipped with a 3-position switch that allows to connect the corresponding socket to the internal bus #1 (left position), bus #2 (right position) or to turn the socket off (centre position).

Examples:

- All switches in left position or all switches in right position: 8-fold multiple

- Four switches in left position and four switches in right position: two 4-fold multiple

- X switches in left position, Y switches in right position and Z switches in centre position: two separate multiples with some sockets turned off
Read more
coming soon $52.95
FORTHCOMING
Doepfer A-184-1 Ring Modulator, Sample & Hold, Track & Hold, & Slew Limiter Module Doepfer A-184-1 Ring Modulator, Sample & Hold, Track & Hold, & Slew Limiter Module Doepfer A-184-1 Ring Modulator, Sample & Hold, Track & Hold, & Slew Limiter Module
Cat: 751756 • View all Synth modules
 
4HP Eurorack module featuring a combination of 3 functions
Notes: Module A-184-1 is the combination of three functions:

- Ring Modulator
- Sample&Hold/Track&Hold unit
- Slew Limiter

The same functions are actually already available in other modules (e.g. A-114, A-148, A-170). But in many systems it's not necessary to have two ring modulators (A-114) or two S&H units (A-148) or two slew limiters (A-170) available. That's why we have compiled these function in one small 4 HP module.

The upper section is nothing but half of an A-114, i.e. a ring modulator with the usual X/Y inputs and the X*Y output. Inputs and outputs of this sub-unit are AC coupled, i.e. suitable only for audio signals. A detailed explanation of a ring modulator can be found on the A-114 info page.

The lower section is a Sample & Hold (S&H) / Track & Hold (T&H) unit (same as half of an A-148) followed by a slew limiter (same as the upper section the A-170). A toggle switch is used to set the mode to S&H or T&H. In S&H mode the unit picks out a sample from the voltage at the SH input at the rising edge of the trigger signal input. In T&H mode the output follows the input voltage as long as the level of the trigger signal is high. As soon as the trigger signal turns low, the last voltage is stored. The trigger input is internally normalled to high, i.e. the unit works just as a slew limiter in T&H mode when no trigger signal is applied.
Read more
coming soon $96.18
Cat: 734890 Rel: 15 Oct 19 • View all Synth modules
 
Multi effects module - 6HP
Notes: Milky Way is a multi effects module with stereo signal flow. Its algorithms are already known from the Blck_Noir and the Grand Terminal.

- Simple and effective 6hp stereo* FX module
- Comes with "T.F.D" firmware installed: 16 types of effects are available, sorted in two banks
- Meta CV effects scanning
- Volume control with VCA

*depending on the effect type
Read more
 2 in stock $180.46
FORTHCOMING
Electro Harmonix Nano Operation Overlord Allied Overdrive Pedal
coming soon $85.36
Cat: 734886 Rel: 15 Oct 19 • View all Synth modules
 
Stereo filter with voltage controlled resonance - 6HP
Notes: Versatile stereo digital filter based on Endorphin's Grand Terminal module. CV-controlled cutoff, resonance and separate high-pass filter. Simple but effective.

Supplier notes:
The Squawk Dirty To Me is a stereo filter with voltage controlled resonance. It features eight filter modes and zero-delay feedback.

- Simple and effective 6hp stereo VCF
- 8 filter modes available with meta CV scanning, famous zero-delay feedback Grand Terminal filters
- Additional hi-pass filter in series quickly cuts the boomy low end
Read more
 3 in stock $180.46
Cat: 734884 Rel: 15 Oct 19 • View all Synth modules
 
6HP VCO with auto-tuning & octave shift
Notes: The Endorphin.es Godspeed is sort of the single oscillator version of the famous Furthrrr Generator. From its big brother it takes over the digital Thru-Zero core and the legendary wavefolder. But it also has new features like a sub-oscillator output and an immensely practical autotune function.

Especially for people starting with a modular system this oscillator is highly recommended. On 6HP it delivers all the features (and more) needed for diving into the depths of West-Coast-Synthesis!
Read more
 3 in stock $253.95
Cat: 731214 Rel: 15 Oct 19 • View all Synth modules
 
4-channel sequencer - 36HP
Notes: USTA is a 4×4 tracks sequencer for voltages and gates with variable stage duration, designed to quickly see and edit multiple voltage relationships in real time.

Variable stage duration means that every single stage duration can be individually set in relation to the clock, instead of being constrained to a one-to-one ratio (i.e. one stage per every clock impulse).

4×4 tracks means that every stage can store and generate up to four separate voltages (two CVs and two gates), and that up to four independent stage sequences can be arranged into as many different tracks.

Its architecture is based on an array of 16 'Stages' which form a 'Pattern'; 16 patterns form a 'Track', and four tracks form a 'Project'. Within each track, each stage can provide two gates and two CVs, and a wide set of options is available to define and modify the value of each output ('Layers') and the way it is played ('Colours').

Every Stage is related to a dedicated stepped encoder for quick and intuitive editing, and all the 16 encoders are arranged in an oval layout with a circular playhead. Every encoder is surrounded by a ring of 16 LEDs and a RGB led, to provide a visual feedback of the current setting of that step basing on the layer you are working on (like raw CV, quantized CV, length, gate...) and the way it should play depending on the RGB colour.
Read more
 1 in stock $711.08
Cat: 749863 Rel: 15 Oct 19 • View all Synthesisers
 
Portable monophonic synthesiser
Notes: Powerful synthesis in the palm of your hand. The Modal Electronics Craft Synth is a very small, yet incredibly capably synthesiser. It features a monophonic synthesis engine that will allow you to create or craft any sound you can imagine. The eight oscillators offer a very wide scope for sound design. If you have a sound in your head that you want to make a reality then the Craft Synth delivers. Featuring everything you would expect from a top end synthesiser in today's high end market, the Craft Synth shrinks it all down into a portable synthesiser that is perfect for creating music in the studio or for performing live. Effects, filters, tuning, envelopes - Craft Synth has it all!
Read more
 4 in stock $139.41
Cat: 751597 Rel: 14 Oct 19 • View all Studio headphones
 
High-quality monitor stereo headphones
Notes: Cheap and cheerful studio headphones from German tech all-rounders. Closed-back over-ear design for good isolation. 45mm drivers for punchy sound.

Supplier notes:
The SHP-900 from Omnitronic is a high quality and affordable monitoring stereo headphone for music producers, video producers and mixing artists. It has a very good external noise absorption and a high output power. This is especially important when recording and listening to music, speech and vocals.

The SHP-900's soft, circumaural ear cushions provide a comfortable fit. The padded, height-adjustable leather earpiece provides additional wearing comfort. So nothing hinders you from working comfortably during long sessions. A powerful 45 mm neodymium converter and a large HQ voice coil ensure an extended frequency range. This makes the SHP-900 the perfect tool for live mixing engineers, home and concept studios.
Read more
 2 in stock $41.49
Cat: 752279 Rel: 18 Oct 19 • View all Guitar tuners & interfaces
 
clip-on mini tuner
Notes: The MOOER CT01 features fast and accurate tuning, a bright and colourful display and is suitable for guitar or bass guitar tuning. A straightforward and intuitive UI and mechanical clip allows users to tune quickly and comfortably, without having to worry about the tuner being in a wrong or hard to read position.
Read more
 1 in stock $22.96
Cat: 749138 Rel: 16 Oct 19 • View all Synthesisers
 
Compact modular system with full analogue design - desktop version
Notes: Eurorack innovators Erica Synths pack as much as possible into a compact case with their Pico system. Huge sonic potential and clever card-based patch preset system.

Supplier notes:
Pico System III brings modular synthesis back to the basics - the system has multi functional (instead of single-function, like Pico Drums or Pico Trigger in the Pico System II) analogue modules and is intended to encourage creativity in modular patching.

The system has 31 inputs and 20 outputs (master output is duplicated) + 7 switches; if you have enough patch cables at your disposal, you can patch the system in 121000931215044250740178662400 or 1.21x1029 variations (we ignored the possibility to adjust potentiometers here). Even though only 0,0001% of all patches will sound more-less enjoyable, you and all your future generations can spend a lifetime only patching the Pico System III.

Voice-cards with preset patches set it apart from other eurorack systems - they allow user to change patches instantly and radically, which makes the system well suited for experimental live performances. The system comes with 5 great sounding "factory preset" voicecards, and 5 DIY voicecards that are empty and users can develop their own patches. More voicecards will be available from Erica Synths shop.

Desktop unit includes: 20 patch cables, 1 Hosa stackable cable, PSU, 5 factory preset & 5 DIY voice-cards, user manual and patch note sheets.
Read more
 9 in stock $540.32
Cat: 749524 Rel: 16 Oct 19 • View all Synth modules
 
Compact modular system with full analogue design - Eurorack version
Notes: Pico System III brings modular synthesis back to the basics - the system has multi functional (instead of single-function, like Pico Drums or Pico Trigger in the Pico System II) analogue modules and is intended to encourage creativity in modular patching.

The system has 31 inputs and 20 outputs (master output is duplicated) + 7 switches; if you have enough patch cables at your disposal, you can patch the system in 121000931215044250740178662400 or 1.21x1029 variations (we ignored the possibility to adjust potentiometers here). Even though only 0,0001% of all patches will sound more-less enjoyable, you and all your future generations can spend a lifetime only patching the Pico System III.

Voice-cards with preset patches set it apart from other eurorack systems - they allow user to change patches instantly and radically, which makes the system well suited for experimental live performances. The system comes with 5 great sounding "factory preset" voicecards, and 5 DIY voicecards that are empty and users can develop their own patches. More voicecards will be available from the Erica Synths shop.

Eurorack module includes: 1 Hosa stackable cable, ribbon power cable, 5 factory preset & 5 DIY voice-cards, user manual and patch note sheets.
Read more
 5 in stock $486.29
Cat: 750516 Rel: 18 Oct 19 • View all Vocal microphones
 
USB condenser microphone
Notes: Uber Mic is the perfect set-up for all your recording needs - whether it's recording acoustic instruments & vocals, capturing pristine audio for podcasts & broadcasting, or simply bringing your gaming experience to the next level. Uber Mic does it all- start recording, streaming & broadcasting now!

Crystal-clear recording demands the right tools for the job. M-Audio's Uber Mic features a large-diaphragm 3-capsule condenser microphone, perfect for podcasting applications or capturing high-quality audio from vocalists, instruments, percussion and more. With a choice of four polar patterns including cardioid, omnidirectional, figure-8 and single point stereo, Uber Mic is primed for virtually any recording scenario:

Cardioid - a directional pattern, perfect for capturing singular sound sources while eliminating unwanted room reflections and background noise
Omnidirectional - equal output/sensitivity at all angles captures your sound sources from all directions, perfect for adding some ambience to your recordings or capturing a group of sound sources
Figure 8 - equal output/sensitivity on two sides of the microphone, ideal for capturing two independent sound sources simultaneously
Stereo - picks up from the left and right side of the microphone, producing a true stereo image

Get hands-on with your recording! Uber Mic's assortment of hardware controls and thoughtful connectivity options guarantee professional, hassle-free capture every time. Troublesome latency issues are a thing of the past, thanks to a conveniently-located dedicated USB/direct mixing control and a microphone volume control. Zero-latency recording and monitoring is now a reality and you'll hear exactly what you're recording in real time.

There's privacy when you need it, courtesy of a microphone mute control and on-board 1/8-inch headphone jack with internal headphone amplifier. Take total control of your recording and make precise adjustments to your currently-selected level and polar pattern configuration with the crisp on-board LCD display. With Uber Mic, everything you need to produce premium pro-grade recordings is at your fingertips.

Complicated setups are a thing of the past. Thanks to a dedicated stand for ultra-convenient desktop mounting, plus a threaded insert for optional boom stand-mounting, Uber Mic is versatile, full-featured and sonically impressive. Whatever your recording needs, think Uber.

Pro Tools | First, the industry standard for recording software, is now included with M-Track C-Series Audio/MIDI interfaces, as well as our renowned CTRL, Code, Oxygen, Hammer and Keystation USB/MIDI keyboard controllers. This amazing audio recording software helps inspire any artist, traveling musician or singer-songwriter to create, record and share all of their ideas across the world at any time.
Pro Tools | First features Unlimited Busses, Elastic Time and Elastic Pitch, Offline Bounce and 1 GB of free cloud storage space for collaboration or accessing your projects from any computer anywhere that is connected to the internet.

This truly amazing software recording package is primed to get your ideas out of your imagination and amplified out into the world, enjoy!

Chop up and mix 2 gigs of samples ranging from deep ambient synth pad loops to vintage drum one shots. These are all designed to inspire your music production and provide professional sounding samples that will shine in your mix. Touch Loops perfectly captures the tone and intensity of each sample, so they enhance and complement any song, wherever you use them. This incredible value can be found in your M-Audio account, ready to be downloaded and chopped to your liking!
Read more
MRP:$129.67 SAVE 23%
 1 in stock $100.12
Cat: 752820 Rel: 17 Oct 19 • View all Synth modules
 
Comb oscillator, VOSIM, summation synthesis & phase modulation with adjustible waveform & wave folder
Notes: Loquelic Iteritas is a digital VCO with interpretations of three classic synthesis algorithms involving dual pitch control. It creates a huge variety of sounds parameterized by four tone and two pitch controls.

It has had glowing reviews from Surgeon and Surachai, and I am personally very excited about this module!

It has a simple interface, with 3 different synthesis algorithms allied to a number of different controls / CV inputs which have different effects, depending on which mode you choose. Simply hook up a number of modulation sources to the 4 inputs and start wiggling!

Rev.2 now features an additional sync input.

Size: 10HP Eurorack
Depth: 1.5 Inches
Power: 2x8 Eurorack
Draw +12V: 150 / 80
Draw -12: 5 / 5
Draw +5v: 0 / 90
Read more
 1 in stock $354.45
Cat: 734891 Rel: 15 Oct 19 • View all Synth modules
 
Portable 2HP power module for compact skiff cases with dual passive mults
Notes: The power module from Endorphin.es is a module for the power supply of smaller modular systems such as skiff cases up to 104 TE width. The module consumes DC power between 12 and 20 volts from an external power supply unit. Voltages of up to +1000 mA and -700 mA are output, also depending on how strong the connected power supply is. In addition, there are two passive multiples.
Read more
 2 in stock $117.78
Cat: 749862 Rel: 15 Oct 19 • View all Synthesisers
 
Four-part polyphonic desktop synthesiser with virtual analogue synthesis
Notes: Tiny but powerful module from British synth brand known for big-budget analogue keyboards. Virtual analogue this time, with built-in sequencer and arpeggiator. Big sound in a small box.

Supplier notes:
Sculpt and shape your sound with total control. The Modal Electronics SKULPT Synthesiser is a compact analogue synth providing a hands-on approach to sound design.

The Modal Electronics SKULPT features 32 oscillators in total, with 8 oscillators per voice with two selectable morphable waveforms. The intuitive design features a 16-key touch MIDI keyboard that allows you to create and audition sounds on the fly.

It also features a built-in sequencer and arpeggiator and an 8-slot modulation matrix with 37 destinations in total. Create everything from classic bassline sounds to cutting-edge pads and leads. Capture your inspiration when it strikes with the SKULPT synthesiser.
Read more
 5 in stock $290.70
Cat: 718636 Rel: 01 May 19 • View all Synthesisers
 
Experimental 25-key paraphonic analogue/digital hybrid synth
Notes: A synthesizer like no other, MicroFreak is a peculiar, exceptional instrument that rewards the curious musician. It blends wavetable and digital oscillators with analogue filters. It features a unique poly-aftertouch flat keyboard. It adds controlled randomness to sequences. This isn't a revolution, it's a mutiny.

This out-there little music machine features a versatile digital oscillator so you can create rare and interesting sounds with ease. Modes like Texturer, KarplusStrong, Harmonic OSC, and Superwave give adventurous musicians the chance to explore totally new, unheard possibilities. Like having dozens of synths in just one instrument, both wild-eyed newcomers and seasoned professionals will fall in love with MicroFreak's flexible, powerful synth engine.

Physical modelling, wavetable synthesis, virtual analogue, there is nothing as complete and exciting as the MicroFreak oscillator on the market. It's hard to believe from such a small synth, but here it is, ready for you to explore. Excite your creativity and reward your curiosity with a large, diverse sound palette. MicroFreak features 11 awesome oscillators, 4 bespoke Arturia engines, and 7 modes from our friends at Mutable Instruments.

Inspired by the trailblazing 12-dB Oberheim SEM filter, you can make MicroFreak's filter scream or whisper to taste. The filter is state-variable, and can even auto-oscillate! You can use this is any way you like, from taking the edge of the razor-sharp wavetable sounds, or automating the cut-off by modulating it with keyboard pressure or the in-built sequencer.

Record up to four automations, edit notes per step or use the innovative Spice and Dice sequencer functions to find happy accidents. Add randomization to create evolving, original patterns, and virtually rewire and reconfigure its signal chain and controls with the 5x7 modulation matrix.
Read more
 More than 10 in stock $252.65
Cat: 621354 Rel: 28 Nov 16 • View all Synth modules
 
Quadruple Low Frequency Oscillator (LFO) synth module in Eurorack format - 10HP wide
Notes: Batumi is a fully voltage controlled, quadruple digital LFO module with a slew of interesting and user-customizable features. Each oscillator can be used independently or in one of 3 synchronized modes: quadrature, phase and divide. For each oscillator, there are sine, square and assignable (saw, ramp, triangle and trapezoid) waveform otputs available. Voltage control is possible for each oscillator's frequency, reset, and external sync ("tap tempo"). The total frequency range spans from 28 hours in voltage controlled divide mode, up to 500 Hz.
Read more
 7 in stock $247.46
Cat: 681306 Rel: 24 Jul 18 • View all Synth modules
 
Multi-algorithm macro oscillator - 12HP
Notes: Plaits is the spiritual successor of Mutable Instruments' best-selling voltage-controlled sound source, Braids. Not just an MKII version: its hardware and software have been redesigned from scratch.

Just like its predecessor, it offers direct access to a large palette of easily tweakable raw sonic material, covering the whole gamut of synthesis techniques.

Simplicity first:

Gone are the screen, menu system, hidden settings, and the long list of somewhat redundant synthesis models.

Thanks to additional CV inputs, and to the use of three timbre-shaping parameters per model, Plaits is straightforward to use, and much closer to the ideal of one synthesis technique = one model. What were fragmented islands of sound in Braids are now part of a continuum of sounds.

Ready for percussion:

Patch a trigger generator or sequencer into Plaits' trigger input and instantly use the module as a percussive source thanks to its built-in virtual low-pass gate (LPG).

An internal D (decay) envelope generator is normalled to all unpatched CV inputs. Just turn the corresponding attenuverter to add pitch, timbre or morphing modulation. And if plucks and snappy hits are not your thing, patch your own envelope or CV source into the LPG CV input.
Read more
 More than 10 in stock $190.19
Cat: 685134 Rel: 24 Jul 18 • View all Synth modules
 
Random gate/voltage generator - 18HP
Notes: Marbles is a source of random gates and voltages, which offers an extensive amount of (voltage) control on all the different flavours of randomness it produces.

The module gives the musician many different ways of imposing structure on the random events generated by the module: synchronization to external clocks, control of the repetition or novelty of the generated material, quantization of the voltages, or randomization of gates or voltages generated by traditional sequencers.

T: The random gate generator

Marbles either follows its own internal clock, or locks onto an adjustable multiplication/division of an external clock (or regular rhythmic pattern). This regular clock is perturbed by a process simulating an musician playing along a click and trying to catch up on their errors - from perfect accuracy to complete chaos.

From this imperfect master clock, a 2-channel random rhythm is generated, using one of the following processes: random coin toss (similar to Branches), random ratcheting, or random drum pattern generation (similar to a randomly modulated Grids).

X: The random voltage generator

This generator produces 3 channels of random voltages, each of them clocked by the individual outputs of the t section, or by a common external clock signal.

Complete control on the distribution of the output voltages is provided: concentrated or spread-out, quantized or unquantized, smoothed or steppy, centred or biased towards a specific voltage. The same transformations can be performed on an external CV, for sample-and-hold or shift-register operation.

An auxiliary slowly fluctuating random voltage output (Y) is also available for self-patching fun!

A feeling of deja-vu:

Marbles remembers the history of every recent clock deviation, rhythm or voltage it has generated. The DEJA VU knob on the panel controls the probability of reusing past material instead of sampling fresh random data.

You are thus given control on the feeling of repetition and structure in the generated random voltages and rhythms. At the extreme, the module no longer generates any novel values and loops over the same pattern (or a random permutation of it). And of course, this (variably) random looping can be performed on external CVs!
Read more
 9 in stock $246.39
Cat: 386768 Rel: 14 Jun 12 • View all Studio headphones
 
Closed dynamic headphones
Notes: The DT 770 Pro is a closed dynamic headphone and has been designed for critical music and sound monitoring. The single sided cable makes the handling of the headphone easy. The cushion system allows the DT 770 Pro to be used comfortably for long periods of time.

The circumaural design with velour cushions and adjustable headband makes the DT 770 headphones really comfortable, even over prolonged periods. The DT 770 250Ohm version is designed for the studio, delivering a higher impedance and a slightly more accurate response than the 80Ohm versions. The higher impedance also means you can safely use multiple headsets from the same source.

The 2 most common complaints when mixing using closed back headphones are that they are uncomfortable and don't produce enough bass, leaving mixes overly compensated (see the FAQ further down for the reasons why). The answer to first problem is to buy open back headphones, but they are no good for recording purposes and may not solve the second issue of bass response. Fortunately, the DT 770 Pro tackle both these problems, delivering an impressive nominal frequency response of 5Hz-35kHz using their innovative bass reflex system with a very large cup and velour cushions that let air through but not sound, thus reducing pressure.
Read more
 6 in stock $112.44
Cat: 648928 Rel: 25 May 17 • View all Synth modules
 
Compact programmable clocked modulation source in Eurorack format - 8HP
Notes: 'Pamela's NEW Workout' is a compact programmable clocked modulation source for your Eurorack modular synthesiser system. It provides 8 highly editable outputs producing various control voltage signals correlated and synced to a BPM based master clock.

Building on the original 'Pamela's Workout', this new evolved model maintains the original's form factor and intuitive workflow but greatly improves on and adds many new features with upgraded hardware, a new OLED display and rewritten software.

Each output is now able to provide not just clocked triggers but also rhythmic waveforms with many parameters controllable directly and via assigning to external CV control. Pamela has grown beyond a clever clock and now provides almost limitless synced modulation possibilities.

Improvements have been made to overall clock stability and integration with external clocks and devices. Also new are dedicated MIDI and Din Sync clock outputs available via optional expander modules.
Read more
 9 in stock $235.57
Cat: 563722 Rel: 09 Mar 15 • View all Audio cables
 
Assorted colour patch cables with length of 12"
Notes: 3.5mm Patch Cables - 5 PAK Assorted Colours 12" (30cm)

Excellent quality patch cables for use with Eurorack modules.

Made by AdInfinitum.

Included colours:
RED
GREEN
YELLOW
GREY
BLUE
Read more
 More than 10 in stock $10.80
Cat: 598836 Rel: 26 Jul 16 • View all MIDI keyboards
 
Slimkey controller keyboard & sequencer with velocity and aftertouch
Notes: KeyStep is a new breed of portable musical tool combining the functionalities of a keyboard controller with a polyphonic step sequencer to control both analog and digital devices.

You need a portable USB MIDI controller but also want a keyboard that provides a musical playing experience? You have some MIDI modules you want to connect as well but don't want the footprint of a large keyboard? You have modular and analog gear you want to control via CV/GATEs? You want a step sequencer with polyphonic capability that can sync to your favourite modern and vintage gear? If only a single piece of gear could do all of this...

It's the touch...
The KeyStep controller does all this and more.
We started by designing our own "slim key" keyboard action, balancing the best features of compact mini-keys with the musicality of full-sized keys into this new keybed. The size, velocity and aftertouch of this new design provide the freedom of portability without sacrificing playability.

We also designed a new polyphonic step-sequencer with 8 programmable memories that you can recall at the turn of knob. You can choose gate times and swing settings instantly to change the feel of your sequenced performance on the fly. We also included the ability to record, overdub, and transpose your sequences in real time and still play the keyboard live.

Add a flexible and fun arpeggiator mode and chord play mode and you are set for hours of musical adventures.

...and the possibilities
These features alone would make KeyStep the best portable keyboard controller on the market. But we take it further by giving you a wealth of connectivity options: USB MIDI (of course), standard MIDI in and out (check), clock sync and DIN sync jacks (yes!), and CV/GATE outputs, plus a separate, assignable modulation CV output that can be used with the mod wheel, velocity or aftertouch. To say KeyStep is an amazing little controller does not say enough.

Keystep is the perfect performance controller in a compact package.

Adapts to your setup!
KeyStep was imagined and designed to become the modern musician's trump-card.
Whatever your setup, KeyStep will merge into it to overdrive your workflow and effectiveness. With KeyStep and its range of connections you can control any digital or analog synthesizer from the past, today and even tomorrow. Sequence them all!
Read more
 7 in stock $104.82
Cat: 718224 Rel: 04 Mar 19 • View all Drum machines
 
Unique 6-track sampler/sequencer with 1GB of sample storage
Notes: Super-creative sample-focused groovebox from the stylish innovators at Elektron. User-friendly six-track sequencer with single-function knobs. Great stuff at a great price.

Supplier notes:
Meet the six track groovebox that offers massive sound in a compact size. You get pretty much all of the Elektron superpowers in a sleek, lightweight, and accessible package. Loads of useful presets and loads of space for your own sounds. The controls are right there at your fingertips. A truly plug-and-play bundle of joy!

Packed with great sounds:

The sound engine uses high-quality digital samples. There are 300 preset sounds supplied by Splice, ranging from the familiar kicks, snares, and hi-hats to exotic, never-before-heard ones. With a few tweaks, you can easily personalize any sample until it sounds just the way you want it. Transfer your own samples into it, or use any of the expertly crafted custom sound packs.

Dedicated knobs:

As an Elektron first, this machine offers a complete set of tactile controls, with one function per knob. They're all right there on the front panel; just grab a knob and twist it. Unleash your music spontaneously using the six tough, velocity-sensitive pads. Record your every move live, or punch in your creation one step at a time using the superb Elektron sequencer.

Ready to go:

At under one kilogram, you're getting the benefits of a light and convenient machine that will surprise you with its snarling sonic power.

- Control All lets you twist your sounds to oblivion. Then use Reload to take you back to where you started
- Use Parameter Locks to automate parameters. Each step can have a totally different sound
- Load six samples at once - just like a kit. Great when you have made a Pattern with Parameter Locks, LFOs etc... Load six new samples to instantly experiment and come up with unique and unexpected results
- Write basslines and melodies using Chromatic Mode
- New Chance parameter. Chance determines the possibility whether the sequencer steps on a track are triggered or not. Combining Chance with the Control All functionality can lead to many interesting results and happy accidents
- Record sequences with or without quantization. Steps can be micro-timed with individual Swing control per track
- Individual Step Length per track
- Individual Tempo Multiplier per track
- Class compliant USB audio 2.0

Included in the box:

- Power Supply PSU-4
- Micro USB Cable USB-2
- MIDI adapter (5-pin DIN to 3.5mm TRS minijack)
Read more
 4 in stock $376.06
Cat: 416484 Rel: 26 Jan 11 • View all MIDI cables & adapters
 
5 pin DIN to 5 pin DIN MIDI cable
Notes: A High quality MIDI cable for connecting music controllers and devices together. Strong and flexible cable with low loss conductors and global shielding ensure a clean data stream. Terminated at each end with a 180 degree 5 pin DIN plug.
Read more
 More than 10 in stock $1.30
Cat: 677050 Rel: 06 Feb 18 • View all Samplers
 
Micro sampler with 40 second sample memory & built-in recording microphone
Notes: Mini sampler from Teenage Engineering's tiny but powerful Pocket Operator range. Looks like a calculator but sounds much better. Punchier than Mike Tyson. Boom.

Supplier notes:
Micro sampler offering 40 seconds of sample time, and a built-in microphone for sampling foley sounds and your own voice on-the-go. Sample any sound source using line in or the built in microphone. Melodic mode lets you play chromatic melodies and drum mode lets you play drums. Sequence it all and add effects on top.
Read more
 5 in stock $84.28
Cat: 386769 Rel: 16 Jul 14 • View all Studio headphones
 
Professional acoustically open headphones for monitoring and studio applications
Notes: Modern classics. Open-backed design means they leak some sound but give a really clear impression of your music. Solid option for production work and mixing.

Supplier notes:
The DT 990 PRO is an open dynamic headphone for studio applications. Due to a weight reduction of the diaphragm an excellent sound reproduction quality is achieved. Its rugged design with a spring steel headband ensures a secure fit and withstands all demands. Soft headband and ear cushioning systems ensure a high comfort over long periods of time.

Beyerdynamic's DT PRO headphone series has it's roots in the early 1980s. Since then, millions of audio professionals from all parts of the world have become loyal users of beyerdynamic products. The series has been designed to cater for listening in a wide variety of environments, thanks to different headphone construction.
Read more
 7 in stock $113.47
Items 1 to 50 of 2,774 on page 1 of 56
1  2  3  ...  56  »

Filter

Saved Searches
Save current search
Release Date
Close