搜索结果

Notes: 'Nude' super-elliptical stylus of just 7.6 x 18 microns (0.3 x 0.7 mil), cut and polished from a single homogeneous piece of diamond. This makes for a lower effective tip mass of improved rigidity, which in turn means its ability to retrieve high-frequency detail is dramatically improved when compared to the 'bonded' elliptical stylus alternative. It's far less likely to 'mis-track' or overshoot when tracing high-frequency groove modulations, and because of its finely polished 7.6-micron profile it can more effectively fit into closely packed inner grooves. Lowerdistortion, improved transient response and a flat frequency response all contribute to superior fidelity when compared to any price-comparable alternative.

Technical specifications

Frequency Range 20 Hz - 20 kHz
Channel Balance < 1.5 dB @ 1 kHz
Channel Separation > 20 dB @ 1 kHz
Sensitivity 3.5 mV (1 kHz @ 5 cm/s)
Static Compliance 20 mm/N
Vertical Tracking Angle 20-
Stylus Radius 7.6 micron (0.3 x 0.7 mil)
Stylus Type Nude eliptical
Load Resistance 47 kO
Load Capacitance 100- 200 pF
Internal Inductance 400 mH
Internal Resistance 410 O
Cartridge Mass 6.9 g
Fixing Centre 12.7 mm (0.5 in)
Playing Weight 1.5 - 2.5 g (1.75 g recommended)

Notes: Representing the pinnacle of E Series engineering and performance, the E4 is the ultimate upgrade for every turntable enthusiast.

World-famous analogue audio specialist Goldring introduces its new flagship E Series moving magnet cartridge: E4. Designed as the ultimate upgrade for any modern budget or midrange turntable, E4 represents the pinnacle of E Series engineering and performance.

E4 is designed to be compatible with all medium-to-high-mass tonearms of the type found on the majority of budget to midrange turntables. And because it's constructed using the same high-quality core as the other E Series cartridges in the range, E4 is ideal both for those who wish to upgrade an obsolete cartridge in its entirety or those who want to boost the performance of their existing E Series cartridge by replacing the stylus.

New super-elliptical nude diamond stylus

The E4 features a 'nude' super-elliptical stylus of just 7.6 x 18 microns (0.3 x 0.7 mil), cut and polished from a single homogeneous piece of diamond. This makes for a lower effective tip mass of improved rigidity, which in turn means its ability to retrieve high-frequency detail is dramatically improved when compared to the 'bonded' elliptical stylus alternative. It's far less likely to 'mis-track' or overshoot when tracing high-frequency groove modulations, and because of its finely polished 7.6-micron profile it can more effectively fit into closely packed inner grooves. Lower distortion, improved transient response and a flat frequency response all contribute to superior fidelity when compared to any price-comparable alternative.

Hollow aluminium cantilever

To complement its low tip-mass stylus, the E4 features a hollow aluminium cantilever tube. The light weight and superior stiffness of the material allows the stylus to trace medium-to-high frequencies with greater accuracy, while simultaneously reducing distortion and mis-tracking.

Magnetic Duplex Technology

Stereo information is contained in a single 'V'-shaped groove that has perpendicular sidewalls angled at 45 degrees. Conventional cartridges, which use a single large magnet interacting with two vertically mounted coils (one for left-channel information, one for right) to extract a stereo signal from the groove, can permit high levels of crosstalk - and consequently only a modest amount of left- and right-channel separation. E4 uses Goldring's Magnetic Duplex Technology that positions two low-mass magnets at the same angles as the coils - so each magnet interacts only with its partnering coil. This allows the E4 to transcribe the information in the groove more accurately, and results in greater stereo separation and a more accurate soundstage.

Expert adjustment facility

'Azimuth' describes the angle that the vertical centre line of the stylus makes with the record's surface - it must be exactly perpendicular to the groove. Owners of budget and midrange turntables usually have no facility to adjust the azimuth, so it's vital the cartridge has been precisely adjusted before it's fitted to the turntable's tonearm - badly adjusted azimuth can cause increased crosstalk and uneven channel balance. E4 is designed to allow micro-adjustments to be made during the production process, ensuring each cartridge leaves the Goldring factory needing no further azimuth adjustment.

Technical Specifications

Frequency Range: 20 Hz - 20 kHz
Channel Balance: < 1.5 dB @ 1 kHz
Channel Separation: > 20 dB @ 1 kHz
Sensitivity: 3.5 mV (1 kHz @ 5 cm/s)
Static Compliance: 20 mm/N
Vertical Tracking Angle: 20-
Stylus Radius: 7.6 micron (0.3 x 0.7 mil)
Stylus Type Nude: elliptical
Load Resistance: 47 kO
Load Capacitance: 100- 200 pF
Internal Inductance: 400 mH
Internal Resistance: 410 O
Cartridge Mass: 6.9 g
Fixing Centre: 12.7 mm (0.5 in)
Playing Weight: 1.5 - 2.5 g (1.75 g recommended)

Notes: GP Ultra Alkaline batteries are specially formulated to meet the increasing demands of today's new generation of power hungry devices such as : Toys, Torches, Portable Radios, Smoke Alarms and Games Console Controllers.

Available in all 5 of the most popular sizes : AA, AAA, C, D, and 9V
For applications where high current over longer periods is required
Ideal for units such as RC model construction, portable radios, torches, toys etc

Pack qty: 4
Type: AA (LR06)
Voltage: 1.5V

Notes: There are many analogue lovers with record collections that include mono albums. Grado strive to have products that will fit all the needs of the analogue enthusiast. So now, Grado offers two new cartridge models in a mono version. The MC+ and the ME+ are mounted with an elliciptical diamond. The ME+ uses one of GRADO's upgraded generating systems. All wooden body cartridges are available in mono version. This will make your records quieter and enhance the musical pleasure of these recordings.

Frequency Response: 10-55,000 Hz
Principal: MI
Input Load: 47K
Output at 1KHz 5CM/sec.: 5mV
Recommended Tracking Force: 1.5
Stylus Type: E
Inductance: 45mH
Resistance: 475
Stylus Replacement: U
Mounting: S/P
Weight: 5.5

Notes: The Prestige Series of 78-RPM cartridges are designed for high output and excellent stability under even severe use. Each cartridge can be used for either archival or casual play without concern for undue wear on the record. All Grado 78 cartridges have a considerable reduction in tip mass resulting in extended frequency response while tracking forces can range from 2-5 grams. The experts acclaim these cartridges as virtually the finest 78-rpm cartridges in the world.

Frequency Response: 10-55,000 Hz
Principal: MI
Input Load: 47K
Output at 1KHz 5CM/sec.: 5mV
Recommended Tracking Force: 2.5
Stylus Type: C
Inductance: 45mH
Resistance: 475
Stylus Replacement: U
Mounting: S/P
Weight: 5.5

Notes: The elegance and luxury feel of real American hardwood that cannot be matched. GrooveWasher's handcrafted Walnut Record Cleaning Kit cleans your vinyl records with beauty, style and ease.

This bundle includes:

Solid milled 5 inch American Walnut handle with a hand rubbed waterproof oil polyurethane finish
Replaceable Microfiber Cleaning Pad. Easy removal for cleaning or replacement.
G2 Record Cleaning Fluid Mist Spray (4 oz)
Record Label Protector Mask

"I have been using this cleaner since it was released...the results are amazing! This is a must for any record collector and would recommend this to anyone looking for the best way to clean their vinyl records! GrooveWasher...or nothing for me!" Christopher Burns

"Hands down, the best record cleaner on the market." Levi E.

"If you enjoy music from a physical medium, you must take care of it." Alex Chase

GrooveWasher Solid Walnut Wood Handle Design

The GrooveWasher walnut handle is milled from a single solid piece of midwest premium American Black Walnut, hand finished by wood artisans with waterproof oil polyurethane in Groovewasher's plant in Kansas City, Missouri, USA. Feel the woodgrain!

NOTE: Every one of Groovewasher's walnut products is unique. Some may have small surface cracks, splits or knots. This is the character of the wood, not a craftsman's mistake.

G2 Record Cleaning Fluid

The GrooveWasher G2 Record Cleaning Fluid is the result of years of research and testing. The selection of ingredients was guided by the formulations of the D series fluids of the 1970s. G2 Fluid is designed for maximum cleaning effectiveness of the delicate vinyl surface and microgroove, without the need for rinsing. Anti-static action on contact. Honest cleaning to release the honest sound of the recording.

High Tech G2 Fluid Contains:

Surfactants: State of the art detergents dissolve and suspend fingerprints and other oily grime.
Super wetting agent: A specialty chemical that reduces the G2 Fluid's surface tension to reach the bottom of the groove. When you spray G2 Fluid on a record you can see it spread down the grooves.
Emulsifiers: Holds the oils, dirt, mildew and microdust particles in suspension. Then the microfiber fabric cleaning pad wipes and pulls the dirt-filled solution from the record surface.
Laboratory grade, double deionized, carbon filtered & UV treated water: Carrier for the active cleaning ingredients. Eliminates static electric charges on the record's surface on contact.

Replaceable Cleaning Pad Design

The GrooveWasher replaceable microfiber cleaning pad features a super absorbent black terry style split microfiber cover. (Other replacement pad styles are available for separate purchase.) This fabric is effective in removing the contaminants borne in the G2 Fluid from the record's microgroove.

The pad is secured to the walnut handle with low profile hook & loop velcro. This allows the pad to be removed from the walnut handle to be washed or replaced. These cleaning pads are hand made by Groovewasher's textile artists in Kansas City.

Notes: Great value from this entry-level rotary mixer. Simple two-channel design with three-band EQ and an intuitive multi-mode filter. A strong rival to the Omnitronic TRM-202MK3.

Supplier's Notes:
Introducing the Headliner R2, a 2-channel rotary DJ mixer that is perfect for DJ's looking for precise control and a warm sound, without breaking the bank. Don't let the price tag fool you. The R2 is packed with features, like an analog filter and 3-band isolator EQs on each channel, and uses only high-quality components, including genuine ALPS potentiometers.

Featuring two stereo channels with selectable Line and Phono RCA inputs, each channel on the Headliner R2 comes equipped with gain control with a peak LED, a 3-band isolator EQ, a headphone cue selector, a large channel volume control knob, and a filter activation switch.

The Master channel boasts an analog filter, headphone monitoring, and output control section. The analog filter features selectable High Pass / Low Pass Filter modes with Frequency and Resonance controls, giving you precise control over your sound. Independent Master and Booth outputs with volume controls, both with balanced XLR and unbalanced RCA connectors, give you the flexibility to connect to any sound system.

The headphone Cue control section is packed with features, including headphones volume control, headphones mix control (Cue/Master), and split monitor switch. You can easily switch between listening to the master output and the cue output, or blend them together in your headphones, giving you complete control over your mix. The high current headphone amplifier with, dual 1/4" and 1/8" jacks, allows you to use any type of headphones you prefer.

The Headliner R2 features genuine ALPS potentiometers, and a sturdy metal enclosure with stained wood side panels for a classic look that will complement any DJ setup. The modular internal construction, coupled with the external power supply connected via locking Mini XLR ensure superior audio performance.

The Headliner R2 is a reliable, high-quality mixer that will give your DJ performances that classic vibe. Whether you're spinning house, techno, or classic funk/soul/disco jams, this fun little mixer is the perfect addition to your setup.

Specifications

Microphone Input
Nominal Input Level: -50dBu
Frequency Response: 20Hz - 20kHz (+/- 0.1dB)
THD + N: < 0.1%
EIN: -120dBu (150O Load)
Input Impedance: 3 kOhm

Line Inputs
Nominal Input Level: -10dBV (-7.8dBu)
Gain Range: -12dB to +12dB
Frequency Response: 20Hz - 20kHz (+/- 0.1dB)
THD + N: < 0.05%
Input Impedance: 47 kOhm

Phono Inputs
Maximum Input Level: -40dBu
Gain Range: -12dB to +12dB
Frequency Response: RIAA
THD + N: < 0.05%
Input Impedance: 47 kOhm

Main Outputs
Nominal Output Levels, balanced: +4dBu
Maximum Output Level, balanced: +20dBu
Nominal Output Levels, unbalanced: -10dBV (-7.8dBu)
Maximum Output Level, unbalanced: +12dBu
Frequency Response: 20Hz-20kHz (+/-0.5dB)
Residual noise: <-80dBu Dynamic Range: > 100dB
Crosstalk: < -65dB
THD + N: < 0.05%

Headphone Output
Maximum Output Level: 70mA/channel into 150O
Minimum Load Impedance: 32 Ohms/channel

Power Supply
Type: External with locking mini-XLR connector
Input Voltage: 100-240v ~ 50/60Hz
Output Voltage: +/-15V; 500mA
Voltage Range: 32 Ohms/channel

Notes: A premium option from Hercules, the Inpulse T7 is a Serato-compatible controller with motorised platters for 7-inch vinyl. Two-channel design with Serato DJ Lite and Djuced software included.

Supplier's Notes:
Are you an aspiring DJ who wants to start spinning on vinyl? The Hercules DJControl Inpulse T7 is the perfect motorized DJ controller to help you take your first steps towards mastering the art of vinyl turntables! This modern take on a classic tool combines the genuine feeling of real vinyl discs with the benefits of digital technology. With 2 motorized platters for 7" discs that go from 0 to 33? RPM in just a tenth of a second, you can practice DJing on vinyl and experience the authentic feeling of real turntables. The separate vinyl record, slipmat, and platter even allow you to remove the vinyl record, giving you full control of your performance.

Serato

DJControl Inpulse T7 includes the Serato DJ Lite software and all of its features. It's compatible with Serato DJ Pro, so that you can enjoy the maximum number of features.

Beatmatch Guide

The Inpulse T7 features the same built-in beatmatch guides as the rest of Hercules' award-winning DJControl Inpulse line to assist DJs in the art of spinning on motorized platters.

Elevate your controller

DJControl Inpulse T7 is 3.5" / 9 cm tall with its feet extended. Elevate your mixing: run wires underneath and protect the controller from spilled drinks.

Experience the sensation of turntables

DJs can mix, beatmatch or scratch on standard-sized 7" platters that go from 0 to 33? RPM in just a tenth of a second. They can also separate the authentic vinyl discs and felt slipmats from the metal platters for a genuine turntable feeling.

Built-in audio

-2 pairs of Master outputs (speakers): 2 x XLR + 2 x RCA
-2 headphones outputs: 14" / 6.35 mm stereo jack + 1/8" / 3.5 mm stereo mini-jack
-Microphone input: 14" / 6.35 mm jack (balanced)
-Audio resolution: 44.1 kHz / 24-bit

Motorised platters

-33 1/3 RPM motorized metal platters (can switch to 45 RPM in Serato DJ Pro)
-Felt slipmats and vinyl records are held in place by the central axis

Controls

-Per deck: 1 filter knob, 3 EQ knobs, 1 gain knob, 1 volume fader, 1 VU meter

-General:

1 crossfader, master volume knob, microphone volume knob, headphones volume knob, Cue to Mix knob, Master VU meter
Effects rack: 2 x 3 Fx Select buttons

-2 paddles, 1 control knob, Beat -/+ buttons

-Platter with touch detection, 3.9-inch / 10-cm tempo fader, Play/Pause, Cue, Shift, Sync

-8 pads × 8 modes (Hot Cue, Loop, Stems)

-Browser knob, Assistant, Range, Loop, Loop In/Out, Instrumental/Vocal, Pitch Bend << / >>

What's in the box:

Hercules DJControl Inpulse T7
2 x felt slipmats + 2 x 7-inch / 17.8-cm replica vinyl records
Braided USB cable
Power adapter + removable power cable
Quick start guide and warranty information leaflet
DJUCEDr and Serato DJ Lite licenses

Notes: ***B-STOCK: Box opened, but product is in excellent condition and in perfect working order***


A premium option from Hercules, the Inpulse T7 is a Serato-compatible controller with motorised platters for 7-inch vinyl. Two-channel design with Serato DJ Lite and Djuced software included.

Supplier's Notes:
Are you an aspiring DJ who wants to start spinning on vinyl? The Hercules DJControl Inpulse T7 is the perfect motorized DJ controller to help you take your first steps towards mastering the art of vinyl turntables! This modern take on a classic tool combines the genuine feeling of real vinyl discs with the benefits of digital technology. With 2 motorized platters for 7" discs that go from 0 to 33? RPM in just a tenth of a second, you can practice DJing on vinyl and experience the authentic feeling of real turntables. The separate vinyl record, slipmat, and platter even allow you to remove the vinyl record, giving you full control of your performance.

Serato

DJControl Inpulse T7 includes the Serato DJ Lite software and all of its features. It's compatible with Serato DJ Pro, so that you can enjoy the maximum number of features.

Beatmatch Guide

The Inpulse T7 features the same built-in beatmatch guides as the rest of Hercules' award-winning DJControl Inpulse line to assist DJs in the art of spinning on motorized platters.

Elevate your controller

DJControl Inpulse T7 is 3.5" / 9 cm tall with its feet extended. Elevate your mixing: run wires underneath and protect the controller from spilled drinks.

Experience the sensation of turntables

DJs can mix, beatmatch or scratch on standard-sized 7" platters that go from 0 to 33? RPM in just a tenth of a second. They can also separate the authentic vinyl discs and felt slipmats from the metal platters for a genuine turntable feeling.

Built-in audio

-2 pairs of Master outputs (speakers): 2 x XLR + 2 x RCA
-2 headphones outputs: 14" / 6.35 mm stereo jack + 1/8" / 3.5 mm stereo mini-jack
-Microphone input: 14" / 6.35 mm jack (balanced)
-Audio resolution: 44.1 kHz / 24-bit

Motorised platters

-33 1/3 RPM motorized metal platters (can switch to 45 RPM in Serato DJ Pro)
-Felt slipmats and vinyl records are held in place by the central axis

Controls

-Per deck: 1 filter knob, 3 EQ knobs, 1 gain knob, 1 volume fader, 1 VU meter

-General:

1 crossfader, master volume knob, microphone volume knob, headphones volume knob, Cue to Mix knob, Master VU meter
Effects rack: 2 x 3 Fx Select buttons

-2 paddles, 1 control knob, Beat -/+ buttons

-Platter with touch detection, 3.9-inch / 10-cm tempo fader, Play/Pause, Cue, Shift, Sync

-8 pads × 8 modes (Hot Cue, Loop, Stems)

-Browser knob, Assistant, Range, Loop, Loop In/Out, Instrumental/Vocal, Pitch Bend << / >>

What's in the box:

Hercules DJControl Inpulse T7
2 x felt slipmats + 2 x 7-inch / 17.8-cm replica vinyl records
Braided USB cable
Power adapter + removable power cable
Quick start guide and warranty information leaflet
DJUCEDr and Serato DJ Lite licenses

Notes: The replacement kit includes 2 pairs of rotation wheels, 5 pcs of the air filter and 5 pcs of water filter.

Inside The Package:

Rotation Wheel x 2 sets
Air filters x 5 pcs
Water filters x 5 pcs
EVA stickers x 2 pcs

Notes: The 7-inch record adaptor for the HumminGuru Ultrasonic Vinyl Record Cleaner. It can hold up the vinyl record that is 2mm in thickness.

Inside The Package:

7" record adaptors
5 rubber stoppers
Manual Instruction

Notes: The 10-inch record adaptor for the HumminGuru Ultrasonic Vinyl Record Cleaner. It can hold up the vinyl record that is 2mm in thickness.

Inside The Package:

10" record adaptors
5 rubber stoppers
Manual Instruction

Notes: The premium dust cover is specifically designed for the HG01 HumminGuru Ultrasonic Vinyl Record Cleaner to provide protection and enhance the aesthetic of your equipment. Another design feature of this protective dust cover is the front pocket where the user can easily place and store the 7"/10" record adapters, the maintenance tool, and the manual Instruction. Now, everything is in one place!

Material: Waterproof polyester twill fabric with soft backing.

Notes: HumminGuru 12" Anti-Static Inner Sleeves

Quantity:50 Pack
Material: HDPE
Color:Translucent White
Product Size:30.6 x 31.6 cm | 0.04 mm / 1.5 mil thick

Acid-free
Anti-static HDPE
Round bottom
Archival quality

Notes: Give your vinyl records the protection they deserve with HumminGuru 12" Protective Outer Record Sleeves! These sleeves are made from heavy-duty 3.5 MIL polypropylene, which is a high-density material that won't easily cloud and will add a layer of superior protection against dust, scratches, and blemishes. The sleeves are crystal clear, allowing you to easily view the artwork and labels on your favourite albums. Measuring 12.75" x 12.75" (32.5 x 32.5 cm), they fit both single and double LPs perfectly. This 50-pack of sleeves is a great value and ideal for anyone who wants to keep their vinyl collection in excellent condition.

Quantity: 50 Pack
Material: HDPP
Color:Transparent
Product Size: 32.5 x 32.5 cm | 0.09 mm / 3.5 mil thick

Acid-free
High-density polypropylene
Crystal clear
Fits single & double LP
Archival quality

Notes: Prince Turntable Slipmats 12" / 7", printed using a high resolution printer, the results will not disappoint.

These are considered the go to slipmats for printers and turntablists, a hybrid slipmat with a unique glazed bottom surface.

These slipmats are compressed with enough thickness and density to accommodate the speed and accuracy of a Scratch DJ, without having the needle bounce when touching the vinyl. The Mix/Club DJ's using IDYD's hybrid glazed slipmats would get the absorbent feel and gain the speed along with the accuracy of a Scratch DJ.

These slipmats also work perfect for any vinyl/collector home turntablist.

Professional Grade Blank Slipmats for 7" / 12" Turntables
Weight: 16oz Felt
Bottom Surface: Glazed
Thickness: .09" (3/32")

Additional information

Weight: 0.2 g
Size: 7", 12"

Notes: Prince Turntable Slipmats 12" / 7", printed using a high resolution printer, the results will not disappoint.

These are considered the go to slipmats for printers and turntablists, A hybrid slipmat with a unique glazed bottom surface.

These slipmats are compressed with enough thickness and density to accommodate the speed and accuracy of a Scratch DJ, without having the needle bounce when touching the vinyl. The Mix/Club DJ's using IDYD's hybrid glazed slipmats would get the absorbent feel and gain the speed along with the accuracy of a Scratch DJ.

These slipmats also work perfect for any vinyl/collector home turntablist.

Professional Grade Blank Slipmats for 7" / 12" Turntables
Weight: 16oz Felt
Bottom Surface: Glazed
Thickness: .09" (3/32")

Additional information

Weight: 0.2 g
Size: 7", 12"

Notes: Prince Cork Slipmats, printed using the latest technology on high density cork.

Material Specs

Colour: Tan
Material: Cork
Dimensions: 11.75" Diameter
Thickness: 0.25 (1/4")
Bottom Surface: Plain surface
Grade: Strong High Quality
Feel: Dense / Firm Purpose:
High Quality Audiophile Vinyl Listening

Additional information

Weight: 150 g

Notes: Multicoloured Turntable Slipmats 12", printed using a high resolution printer, the results will not disappoint.

These are considered the go to slipmats for printers and turntablists, A hybrid slipmat with a unique glazed bottom surface.

These slipmats are compressed with enough thickness and density to accommodate the speed and accuracy of a Scratch DJ, without having the needle bounce when touching the vinyl. The Mix/Club DJ's using our hybrid glazed slipmats would get the absorbent feel and gain the speed along with the accuracy of a Scratch DJ.

These slipmats also work perfect for any vinyl/collector home turntablist.

Want to use your own image? Click here to check out our personalised slipmats!

Professional Grade Blank Slipmats for 12" Turntables
Weight: 16oz Felt
Bottom Surface: Glazed
Thickness: .09" (3/32")

Notes: The Bowie Turntable Slipmats 7", printed using a high resolution printer, the results will not disappoint.

These are considered the go to slipmats for printers and turntablists, A hybrid slipmat with a unique glazed bottom surface.

These slipmats are compressed with enough thickness and density to accommodate the speed and accuracy of a Scratch DJ, without having the needle bounce when touching the vinyl. The Mix/Club DJ's using our hybrid glazed slipmats would get the absorbent feel and gain the speed along with the accuracy of a Scratch DJ.

These slipmats also work perfect for any vinyl/collector home turntablist.

Professional Grade Blank Slipmats for 7" Turntables
Weight: 16oz Felt
Bottom Surface: Glazed
Thickness: .09" (3/32")

Additional information
Weight: 0.2 g
Size: 7"
Pair of Slipmats

Notes: The Great Wave Turntable Slipmats 7", printed using a high resolution printer, the results will not disappoint.

These are considered the go to slipmats for printers and turntablists, A hybrid slipmat with a unique glazed bottom surface.

These slipmats are compressed with enough thickness and density to accommodate the speed and accuracy of a Scratch DJ, without having the needle bounce when touching the vinyl. The Mix/Club DJ's using our hybrid glazed slipmats would get the absorbent feel and gain the speed along with the accuracy of a Scratch DJ.

These slipmats also work perfect for any vinyl/collector home turntablist.

Professional Grade Blank Slipmats for 7" Turntables
Weight: 16oz Felt
Bottom Surface: Glazed
Thickness: .09" (3/32")

Additional information
Weight: 0.2 g
Size: 7"
Pair of Slipmats

Notes: Stormtrooper Strobe Turntable Slipmats 12", printed using a high resolution printer, the results will not disappoint.

These are considered the go to slipmats for printers and turntablists, A hybrid slipmat with a unique glazed bottom surface.

These slipmats are compressed with enough thickness and density to accommodate the speed and accuracy of a Scratch DJ, without having the needle bounce when touching the vinyl. The Mix/Club DJ's using IDYD's hybrid glazed slipmats would get the absorbent feel and gain the speed along with the accuracy of a Scratch DJ.

These slipmats also work perfect for any vinyl/collector home turntablist.

Professional Grade Blank Slipmats for 12" Turntables
Weight: 16oz Felt
Bottom Surface: Glazed
Thickness: 0.09"

Weight: 0.2 g
Size: 12"
Pair of slipmats

Notes: Stormtrooper Strobe Turntable Slipmats 7", printed using a high resolution printer, the results will not disappoint.

These are considered the go to slipmats for printers and turntablists, A hybrid slipmat with a unique glazed bottom surface.

These slipmats are compressed with enough thickness and density to accommodate the speed and accuracy of a Scratch DJ, without having the needle bounce when touching the vinyl. The Mix/Club DJ's using IDYD's hybrid glazed slipmats would get the absorbent feel and gain the speed along with the accuracy of a Scratch DJ.

These slipmats also work perfect for any vinyl/collector home turntablist.

Professional Grade Blank Slipmats for 7" Turntables
Weight: 16oz Felt
Bottom Surface: Glazed
Thickness: 0.09"

Weight: 0.2 g
Size: 7"
Pair of slipmats

Notes: Fresh Prince Turntable Slipmats 12", printed using a high resolution printer, the results will not disappoint.

These are considered the go to slipmats for printers and turntablists, A hybrid slipmat with a unique glazed bottom surface.

These slipmats are compressed with enough thickness and density to accommodate the speed and accuracy of a Scratch DJ, without having the needle bounce when touching the vinyl. The Mix/Club DJ's using IDYD's hybrid glazed slipmats would get the absorbent feel and gain the speed along with the accuracy of a Scratch DJ.

These slipmats also work perfect for any vinyl/collector home turntablist.

Professional Grade Blank Slipmats for 12" Turntables
Weight: 16oz Felt
Bottom Surface: Glazed
Thickness: 0.09" (3/32")

Additional information

Weight: 0.2 g
Size: 12"
Pair of Slipmats

Notes: Fresh Prince Turntable Slipmats 7", printed using a high resolution printer, the results will not disappoint.

These are considered the go to slipmats for printers and turntablists, A hybrid slipmat with a unique glazed bottom surface.

These slipmats are compressed with enough thickness and density to accommodate the speed and accuracy of a Scratch DJ, without having the needle bounce when touching the vinyl. The Mix/Club DJ's using IDYD's hybrid glazed slipmats would get the absorbent feel and gain the speed along with the accuracy of a Scratch DJ.

These slipmats also work perfect for any vinyl/collector home turntablist.

Want to use your own image? Click here to check out our personalised slipmats!

Professional Grade Blank Slipmats for 7" Turntables

Weight: 16oz Felt
Bottom Surface: Glazed
Thickness: 0.09" (3/32")

Additional information

Weight: 0.2 g
Size: 7"
Pair of Slipmats

Notes: Skull Turntable Slipmats 12", printed using a high resolution printer, the results will not disappoint.

These are considered the go to slipmats for printers and turntablists, A hybrid slipmat with a unique glazed bottom surface.

These slipmats are compressed with enough thickness and density to accommodate the speed and accuracy of a Scratch DJ, without having the needle bounce when touching the vinyl. The Mix/Club DJ's using IDYD hybrid glazed slipmats would get the absorbent feel and gain the speed along with the accuracy of a Scratch DJ.

These slipmats also work perfect for any vinyl/collector home turntablist.

Professional Grade Blank Slipmats for 12" Turntables
Weight: 16oz Felt
Bottom Surface: Glazed
Thickness: .09" (3/32")

Additional information

Weight: 0.2 g
Size: 12"
Pair of Slipmats

Notes: Mandala Turntable Slipmats 12", printed using a high resolution printer, the results will not disappoint.

These are considered the go to slipmats for printers and turntablists, A hybrid slipmat with a unique glazed bottom surface.

These slipmats are compressed with enough thickness and density to accommodate the speed and accuracy of a Scratch DJ, without having the needle bounce when touching the vinyl. The Mix/Club DJ's using our hybrid glazed slipmats would get the absorbent feel and gain the speed along with the accuracy of a Scratch DJ.

These slipmats also work perfect for any vinyl/collector home turntablist.

Professional Grade Blank Slipmats for 12" Turntables
Weight: 16oz Felt
Bottom Surface: Glazed
Thickness: .09" (3/32")

Additional information
Weight: 0.2 g
Size: 12"
Pair of Slipmats

Notes: Mandala Turntable Slipmats 7", printed using a high resolution printer, the results will not disappoint.

These are considered the go to slipmats for printers and turntablists, A hybrid slipmat with a unique glazed bottom surface.

These slipmats are compressed with enough thickness and density to accommodate the speed and accuracy of a Scratch DJ, without having the needle bounce when touching the vinyl. The Mix/Club DJ's using IDYD's hybrid glazed slipmats would get the absorbent feel and gain the speed along with the accuracy of a Scratch DJ.

These slipmats also work perfect for any vinyl/collector home turntablist.

Professional Grade Blank Slipmats for 7" Turntables
Weight: 16oz Felt
Bottom Surface: Glazed
Thickness: .09" (3/32")

Additional information
Weight: 0.2 g
Size: 12"
Pair of Slipmats

Notes: Skull Turntable Slipmats 7", printed using a high resolution printer, the results will not disappoint.

These are considered the go to slipmats for printers and turntablists, A hybrid slipmat with a unique glazed bottom surface.

These slipmats are compressed with enough thickness and density to accommodate the speed and accuracy of a Scratch DJ, without having the needle bounce when touching the vinyl. The Mix/Club DJ's using IDYD's hybrid glazed slipmats would get the absorbent feel and gain the speed along with the accuracy of a Scratch DJ.

These slipmats also work perfect for any vinyl/collector home turntablist.

Professional Grade Blank Slipmats for 7" Turntables
Weight: 16oz Felt
Bottom Surface: Glazed
Thickness: .09" (3/32")

Additional information
Weight: 0.2 g
Size: 7"
Pair of Slipmats

Notes: The Great Wave Cork Slipmat, printed using the latest technology on high density cork.

Material Specs Colour: Tan
Material: Cork
Dimensions: 11.75" Diameter
Thickness: 0.25 (1/4")
Bottom Surface: Plain surface
Grade: Strong High Quality
Feel: Dense / Firm Purpose:
High Quality Audiophile Vinyl Listening

Additional information

Weight: 150 g
Single Slipmat

Notes: Vacation Turntable Slipmats 12", printed using a high resolution printer, the results will not disappoint.

These are considered the go to slipmats for printers and turntablists, A hybrid slipmat with a unique glazed bottom surface.

These slipmats are compressed with enough thickness and density to accommodate the speed and accuracy of a Scratch DJ, without having the needle bounce when touching the vinyl. The Mix/Club DJ's using IDYD's hybrid glazed slipmats would get the absorbent feel and gain the speed along with the accuracy of a Scratch DJ.

These slipmats also work perfect for any vinyl/collector home turntablist.

Professional Grade Blank Slipmats for 12" Turntables
Weight: 16oz Felt
Bottom Surface: Glazed
Thickness: 0.09" (3/32")

Additional information

Weight: 0.2 g
Size: 12"
Pair of Slipmats

Notes: Vacation Turntable Slipmats 7", printed using a high resolution printer, the results will not disappoint.

These are considered the go to slipmats for printers and turntablists, A hybrid slipmat with a unique glazed bottom surface.

These slipmats are compressed with enough thickness and density to accommodate the speed and accuracy of a Scratch DJ, without having the needle bounce when touching the vinyl. The Mix/Club DJ's using IDYD's hybrid glazed slipmats would get the absorbent feel and gain the speed along with the accuracy of a Scratch DJ.

These slipmats also work perfect for any vinyl/collector home turntablist.

Professional Grade Blank Slipmats for 7" Turntables
Weight: 16oz Felt
Bottom Surface: Glazed
Thickness: .09" (3/32")

Additional information

Weight: 0.2 g
Size: 7"
Pair of Slipmats

Notes: The Maze Cork Slipmats, printed using the latest technology on high density cork.

Material Specs Colour: Tan
Material: Cork
Dimensions: 11.75" Diameter
Thickness: 0.25 (1/4")
Bottom Surface: Plain surface
Grade: Strong High Quality
Feel: Dense / Firm Purpose:
High Quality Audiophile Vinyl Listening

Weigjht: 150 g
Single Slipmat

Notes: Swirl Cork Slipmats, printed using the latest technology on high density cork.

Material Specs Colour: Tan
Material: Cork
Dimensions: 11.75" Diameter
Thickness: 0.25 (1/4")
Bottom Surface: Plain surface
Grade: Strong High Quality
Feel: Dense / Firm Purpose:
High Quality Audiophile Vinyl Listening

Additional information

Weight: 150 g
Single Slipmat

Notes: Paradise Garage Turntable Slipmats 7", printed using a high resolution printer, the results will not disappoint.

These are considered the go to slipmats for printers and turntablists, A hybrid slipmat with a unique glazed bottom surface.

These slipmats are compressed with enough thickness and density to accommodate the speed and accuracy of a Scratch DJ, without having the needle bounce when touching the vinyl. The Mix/Club DJ's using IDYD's hybrid glazed slipmats would get the absorbent feel and gain the speed along with the accuracy of a Scratch DJ.

These slipmats also work perfect for any vinyl/collector home turntablist.

Professional Grade Blank Slipmats for 7" Turntables
Weight: 16oz Felt
Bottom Surface: Glazed
Thickness: 0.09" (3/32")

Additional information

Weight: 0.2 g
SIZE: 7"
Pair of Slipmats

Notes: Paradise Garage Cork Slipmats, printed using the latest technology on high density cork.

Material Specs Color: Tan
Material: Cork
Dimensions: 11.75" Diameter
Thickness: 0.25 (1/4")
Bottom Surface: Plain surface
Grade: Strong High Quality
Feel: Dense / Firm Purpose:
High Quality Audiophile Vinyl Listening

Additional information

Weight: 150 g
Single Slipmat

Notes: Stormtrooper Turntable Slipmats 7", printed using a high resolution printer, the results will not disappoint.

These are considered the go to slipmats for printers and turntablists, A hybrid slipmat with a unique glazed bottom surface.

These slipmats are compressed with enough thickness and density to accommodate the speed and accuracy of a Scratch DJ, without having the needle bounce when touching the vinyl. The Mix/Club DJ's using IDYD's hybrid glazed slipmats would get the absorbent feel and gain the speed along with the accuracy of a Scratch DJ.

These slipmats also work perfect for any vinyl/collector home turntablist.

Professional Grade Blank Slipmats for 7" Turntables
Weight: 16oz Felt
Bottom Surface: Glazed
Thickness: .09" (3/32")

Additional information

Weight: 0.2 g
Size: 12"
Pair of Slipmats

Notes: Introducing Jazzman's own exclusive range of brand new 7" hard-wearing wooden record cases, in equal measure stylish and functional, solving the age-old problem of storing, transporting & displaying your precious 45s once and for all!

The PRO Large holds 150 x 7" records, and is available in your choice of 2 finishes: Dark Walnut or Graphite Grey.

This new updated design is again custom made to an exact specification in limited numbers. They don't just look the business, they've been built for professional use and will last for many years to come.

Ugly, bulky industrial cheap n' nasty mass-produced flight cases they are not! No flimsy plastic, chipboard, MDF or cheap cardboard either! These cases are hand-crafted from ethically-sourced & hard-wearing wood, the ultimate 7" record cases for all serious record collectors & professional DJs.

Each case has been hand-made in the EU from wood that has been sourced from managed and sustainable forests. They have been custom built to Jazzman's exact specifications before being stained and lacquered for a durable finish:

The lid is fully removable via detachable metal hinges so you have unfettered access to your records
Interior lined with soft & durable black felt to add both extra cushioning and a luxurious feel. Each interior is also embossed once with Jazzman's shiny 45CASE logo
All corners made with extra strong interlocking dovetail joints
Dual metal catches on the front are lockable with padlocks (not included) to keep your records secure from unwanted attention
Strong metal brackets feature on all corners to further protect against knocks & damage
Wood sourced from managed and sustainable forests
The base has 4 sturdy rubber feet to protect the bottom of the case when standing
Each cases has dual compartments, securely holding up to 150 of your prized 7" records. The interior dimensions will also accommodate double-bagged 45s.

Important note: due to the innate variability of wood grain, each box is unique and will differ slightly to the image shown. Records are for illustration purposes only and are not included!

Details:

Exterior size: 420 x 220 x 220mm
Weight when empty: 3.2kg (7lb)
Weight with 150 records: 11kg (24lb)

"I'm really impressed with this box, nobody's made them like this for years, a nice new home for my best stuff" - Mark 'Butch' Dobson (World #1 Northern Soul DJ)

"Jazzman are already known for making great records, well done to them for making the nicest record boxes I've seen in years" - Norman Jay MBE

"Sturdy and with a classic design, this is the best 7" box I have come across" - Eddie Pillar (Acid Jazz)

"Northern, Funk, Rockabilly, Garage - these are the boxes to keep 'em in, f*** marvellous!" - The Legendary Keb Darge

Notes: Based on the iconic Shure M44 cartridge and N44 stylus designs, Jico's N-44 styluses are compatible with the M44 or their own J44 cartridge. This N-44-7 DJ IMP NUDE model features a conical diamond tip and a sound tailored for DJ use.

Supplier's notes:
The N-44-7 stylus offers a brighter sound than the N-44G stylus that is included with the J44D, with a thicker bass sound-the same difference as with the SHURE 44 cartridges.

JICO has followed the structure of the SHURE products to release the alternative replacement. Not only the sound output is as close to the SHURE M44 cartridge models but the tracking ability of the J44 performs as the same with sticking to a record groove with high jump/skip resistance and low record wear.

Additional information

Manufacturer: SHURE
Cantilever : Aluminum
Cartridge number: M44-7
Colour: WHITE
Tip: NUDE Conical Stylus
Tracking Force: 3.5 - 4.5 g
Type: Moving Magnet

Notes: DJ SERIES

NUDE Tip is used for this product:

The entire tip of a NUDE Stylus is composed of diamond, as opposed to bonded tips.

The tip angle and round shape are identical to those of a standard bonded tip, while the diameter size is similar in comparison to the SAS series.

Additional information

Manufacturer: STANTON
Cantilever : Aluminium
Cartridge number: 680EL2, 681EL
Colour: WHITE
Tip: NUDE Conical Stylus
Tracking Force: 4.0 g
Type: Induced Magnet (IM)

Notes: ***B-STOCK: Slight surface marks ***


If you're looking for a stylish and effective storage solution for your expanding record collection, look no further than the Legend Vinyl Storage case with fold-down front and back flaps. Browsing a large number of albums has never been simpler with this easy-access storage solution. Our LP case has been engineered to balance perfectly so it won't topple over.

Display next to your turntable to access your vinyl collection or use as portable storage, this solid and durable 'flight style' LP case is perfect to pick up and go. If you take your vinyl with you or even want to move them from room to room, this case gives ultimate protection and is built to last! Solid wood 5mm frame and Reinforced handles will support up to 15kgs.

Comfortably fits a mix of up to 50 single and gatefold LPs.

Features:
Unique folding front and back flaps for quick and easy access to your LPs
Outer dimensions 37 x 3 x 23 cm will hold a mix of up to 50 single and double LPs
Easy grip, sturdy handle supports up to 15kg - won't buckle or break
5mm solid wood frame offers maximum protection for your LP collection
Fully lined inner with reinforced corners and hinges

Notes: The new MULTI-FORMAT CASE PLAYER/MIXER (V10/A9) SET is specifically designed for transporting two CDJ/Multimedia Players and a 6 or 4-channel club mixer, such as the Pioneer DJM-V10, DJM-A9, or Ecler Warm 4. The case is universally compatible with all current models from Pioneer DJ, Denon, Allen & Heath, Ecler, Rane and Reloop, and can be adjusted to different device sizes using the included foam strips. Crafted from 9 mm vinyl laminated plywood, sturdy aluminum profiles, heavy duty butterfly latches and smooth rolling wheels, this case provides ultimate protection for mobile use on the road.

Fits

Pioneer DJM-V10
Pioneer DJM-A9
Pioneer DJM-900 NXS2
Pioneer DJM-900 NXS / SRT
Pioneer DJM-800 / 700 / 600
Pioneer CDJ-3000
Pioneer CDJ-2000 NXS2
Pioneer CDJ-2000 NXS
Pioneer CDJ-900 / 850 / 800
Pioneer XDJ-1000
Allen & Heath PX5
Allen & Heath DB4
Allen & Heath DB2
Allen & Heath Xone 92 / 62 / 43C
Denon LC 6000 Prime
Denon SC-6000 / SC-6000M
Denon SC-5000 / SC-5000M
Denon X1850 / X1800
Denon X1600
Denon SC3900
Denon SC2900
Reloop RMX-90 DVS
Reloop RMX-80 Digital
Ecler Warm 4
Ecler NUO4
Rane MP2015
Rane Sixty-Eight / Sixty-Four

Specs

Outer measures: 125,4 x 59 x 25 cm
Inner measures: 33,1 x 42,5 x 8,4 cm / (CDJ compartment) 43,7 x 45,4 x 8,4 cm (Mixer compartment)
Weight: 21,5 kg

Notes: Introducing the CTRL CASE DJM-V10/DJM-A9 - the perfect protective solution for DJs on the go. This durable case is custom-designed to fit both, the latest Pioneer DJM-A9 and DJM-V10 club-mixer models, providing maximum protection with a Durashock molded EVA shell and fully padded interior. Plus, it features a convenient slot for storing audio cables and power adapters.

Fits:

Pioneer DJM-A9
Pioneer DJM-V10

Basics:

Crafted from 8 mm thick and rigid Durashock molded EVA foam and water rejecting polyester exterior shell
Sturdy zipper
Incl. removable egg-foam plus fully padded interior
Comfortable, rivet reinforced carrying handles and shoulder strap (with metal buckles)
Compatible with Decksaverr cover

Specs:

Outer measures: 57 x 56 x 15 cm
Inner measures DJM-V10: 46 x 44 x 7 cm / DJM-A9: 43 x 41 x 7 cm (Equipment slot)
Weight: 2,3 kg
Colour: black/black

Notes: Introducing the CTRL CASE FOUR - the perfect protective solution for DJs on the go. This durable case is custom-designed to fit the latest Rane Four DJ-controller, providing maximum protection with a Durashock moulded EVA shell and fully padded interior.

Fits:

Rane Four

Basics:

Crafted from 8 mm thick and rigid Durashock moulded EVA foam and water rejecting polyester exterior shell
Sturdy zipper
Incl. removable egg-foam and 4 EVA foam-corners
Comfortable, rivet reinforced carrying handles and shoulder strap (with metal buckles)
Compatible with Decksaver cover

Specs:

Outer measures: 87 x 46 x 14 cm
Inner measures: 78,5 x 39,5 x 11 cm
Weight: 2,65 kg
Colour: black

Notes: The new CTRL Case Opus QuadOPUS QUAD is a compact hard shell case, offering a safe and comfortable way to carry (incl. shoulder-strap) your Pioneer Opus Quad controller. Made of lightweight and rigid Durashock molded EVA shell, the inside is equipped with high density EVA foam corners and egg-crate foam to protect the display, jog wheels, and faders.

Fits:

Pioneer Opus Quad

Basics

Crafted from 9 mm thick and rigid Durashock molded EVA foam and water rejecting polyester exterior shell
Sturdy zipper
Incl. removable egg-crate foam and high-density EVA foam corners for ultimate protection
Comfortable, rivet reinforced carrying handles and shoulder strap
Compatible with Decksaver cover

Specs

Outer measures: 99 x 57 x 19,5 cm
Inner measures: 86,7-92,7 x 40,5 x 12 cm
Weight: 5,1 kg

Notes: Customized to hold the new Denon SC Live 4 controller. Crafted from 9 mm vinyl laminated plywood, sturdy aluminium profiles and heavy duty butterfly latches, this case provides ultimate protection for mobile use on the road.

Fits

Denon SC Live 4

Basics

Heavy duty construction of 9 mm vinyl laminated plywood
Solid aluminium profiles and spring loaded latches
Secure stacking due to stackable ball corners
Full padded interior keeps Controller well-protected
Detachable front cover/panel

Specs

Outer measures: 80 x 51 x 22,5 cm
Inner measures: 72 x 34,7 x 5,6 cm (Controller-compartment)
Weight: 12,4 kg
Colour: black/silver

Notes: Customized to hold the new Denon SC Live 2 controller. Crafted from 9 mm vinyl laminated plywood, sturdy aluminum profiles and heavy duty butterfly latches, this case provides ultimate protection for mobile use on the road.

Fits:

Denon SC Live

Basics:

Heavy duty construction of 9 mm vinyl laminated plywood
Solid aluminium profiles and spring loaded latches
Secure stacking due to stackable ball corners
Full padded interior keeps Controller well-protected
Detachable front cover/panel

Specs:

Outer measures: 74 x 50 x 22,5 cm
Inner measures: 65,2 x 33,5 x 5,6 cm (Controller-compartment)
Weight: 11,1 kg
Color: black/silver

Notes: Custom designed to accommodate a Pioneer DJM-V10 or DJM-A9 club-mixer. The included foam-set provide a snug fit for the slightly smaller DJM-A9 mixer. Crafted from 9 mm vinyl laminated plywood, sturdy aluminium profiles and heavy duty butterfly latches this case provides ultimate protection for mobile use on the road.

Fits

Pioneer DJM-V10
Pioneer DJM-A9

Basics

Heavy duty construction of 9 mm vinyl laminated plywood
Solid aluminium profiles and spring loaded latches
Incl. foamset to fit the DJM-A9 model
Removable front panel covers
Full padded interior

Specs

Outer dimensions: 61 x 50,5 x 21,5 cm
Inner dimensions: 45,4 x 43,7 x 8,5 cm (DJM-V10) / 42,4 x 40,7 x 8,5 43,8 x 33,1 x 8,4 cm (DJM-A9)
Weight: 9,8 kg
Colour: black/silver

Notes: Customised to hold the new Rane Four DJ-Controller. Crafted from 9 mm vinyl laminated plywood, sturdy aluminium profiles, heavy duty butterfly latches and smooth rolling wheels, this case provides ultimate protection for mobile use on the road.

Fits

Rane Four

Basics

Heavy duty construction of 9 mm vinyl laminated plywood
Solid aluminium profiles and spring loaded latches
Incl. gliding laptop platform (removable)
Incl. recessed wheels for easy transportation
Full padded interior keeps controller well-protected
Detachable front cover/panel
Solid rubber feet

Specs

Outer measures: 89,5 x 54,5 x 23,5 cm
Inner measures: 78,3 x 39,3 x 8,8 cm
Weight: 17,8 kg
Colour: black/silver

Notes: The new CTRL Case DDJ-REV5 is a super lightweight and compact hard shell case, offering a safe and comfortable way to carry (incl. shoulder-strap) your Pioneer DDJ-REV5 controller. Made of lightweight and rigid Durashock moulded EVA shell, the inside is equipped with high density EVA foam corners and egg-crate foam to protect the jog wheels, knobs and faders.

Fits

Pioneer DDJ-REV5

Basics

Crafted from 8 mm thick and rigid Durashock molded EVA foam and water rejecting polyester exterior shell
Sturdy zipper
Incl. removable egg-crate foam and high-density EVA foam corners for ultimate protection
Comfortable, rivet reinforced carrying handles and shoulder strap
Compatible with Decksaver cover

Specs

Outer measures: 83 x 46 x 14 cm
Inner measures: 73 x 37 x 11 cm
Weight: 3 kg