搜索结果

Notes: The double stand is intended to house two Behringer synthesizers, with the ability to improve the operating position on both.

At the same time, it saves a lot of space on the surface, ideal for optimizing the space in our studios.

The stand includes rubber feet so it won’t scratch or slip.

It is compatible with Model D, K2, Pro 1, Neutron, Cat, Wasp

Notes: The VS-Box 1/45 is a 12 inch vinyl storage box that can be conveniently attached to the wall. So you always have your favourite vinyl treasures at hand. The box can be easily mounted on the wall and hung in a row.

Due to its purist and elegant design, the LP Box fits into any living room and, in addition to its functionality, also creates a great decorative effect on the wall. The box is made of high-quality MDF material and is laminated with a robust, water-repellent decor.

With the VS-Box 1/45 you can store up to 50 LPs. Thanks to the semi-open design it is possible to browse through your records quickly and easily.

Technical specifications

Dimensions (L x W x H): 360 x 168 x 190 mm
Weight: 2.7 kg
Format: LPs
Capacity: up to 50 pieces
Material: Wood

Notes: SBSTRT features 256 recordings of raw, natural earth sounds, all of which were created by manipulating numerous materials such as metal, stone, ice, earth, plastic, wood, vegetables, fruit and liquid to name just a few. Everyday sounds you may hear in a construction site, warehouse, traffic, crowd, factory, subway, garden, park, office or forest have been identified, performed and captured for integrating into the modular synth. These raw & unprocessed sounds were carefully edited to highlight their percussive qualities, making them an ideal counterpart to the electronic modular sound palette.

All samples on the card are available for playback at 48k, 64k and 96k for maximum versatility in pitch control while maintaining latencies of as low as 0.25 ms.

Design by: Glitchmachines
Type: One Shot
Character: Percussive, Texture

Only compatible with the Tiptop Audio One Digital Audio Flux Eurorack Module.

Notes: PERC features 256 percussion sounds with tight attacks and a bright harmonic spectrum. This collection is specifically focused on shorter percussive samples and includes material such as multi-layer drum & percussion hits, chopped & processed loops, synthesized FM strikes, mallet and bell tones, sampled drum machines, various toms and hand drums, obscure noise boxes, sampled old-school game chips and much more. PERC makes full use of ONE's snappy character.

All samples on the card are available for playback at 48k, 64k and 96k for maximum versatility in pitch control while maintaining latencies of as low as 0.25 ms.

Design by: Glitchmachines
Type: One Shot
Character: Percussive

Only compatible with the Tiptop Audio One Digital Audio Flux Eurorack Module.

Notes: We Love Vinyl - 12" slipmat

Notes: The N-44G stylus offers a thicker bass sound than the N-44-7 stylus that is included with the J44A 7, which gives a brighter sound-the same difference as with the SHURE 44 cartridges.

JICO has followed the structure of the SHURE products to release the alternative replacement. Not only the sound output is as close to the SHURE M44 cartridge models but the tracking ability of the J44 performs the same with sticking to a record groove with high jump/skip resistance and low wear.

Additional information

Manufacturer : Shure
Cantilever: Aluminium
Cartridge number: M44G
Colour: DK / Grey
Tip: NUDE Conical Stylus
Tracking Force: 3.5 - 4.5 g
Type: Moving Magnet

Notes: Replacement Styli for 22-155 (IDN-155 E) Black (Dual) I, Ellip Tip

A popular replacement stylus. Individually packed in a plastic case. Made in Japan.

Colour: Black
Product Dimensions (mm): 11x20x10
Net weight (kg): 0.01

Notes: Motomouth is an analogue 3-Band, Sedra + Espinoza Bandpass Filter (DABP) with resonant frequencies that are tuned to the same resonant frequencies found in the human mouth and nose cavities, and these can be varied, independently, to form different 'mouth shapes,' to emulate vowels such as A, E, I, O and U. Motomouth can emulate 16 vowels and 'morph' or 'glide' between each vowel using a single Control Voltage input (1V/Oct), and a Gate to 'snap' to each vowel when required.

Two of the bands (F1 and F2) are used to form the mouth cavity, and the third band (F3) is used to form the nasal cavity, which is reasonably static. Varying F3 makes little significant difference 'in the mix,' but having it is important.

The single Control Voltage is decoded to control F1 and F2 independently, because the frequency bands for each vowel are not proportional to each other over the vowel range. So Motomouth has learned how to 'speak,' so to speak, but it still needs to learn more, and that's where you come in.

Specifications:
Module width: 12HP
Module depth: 42mm
Power draw:
+12V: 80mA
-12V: 4mA

Notes: The 3:1 Mixer has two section of 3 inputs to a single output. Each input will be mixed at 1/3 of the level of the input. Each section has an LED indicator indicating activity on the output. Section 1 is normalled to section 2 so it can easily behave as a 6:1 mixer as well.

Width: 2HP
12V: 30mA
-12V: 30mA

Module power connector can be connected either way.

Notes: This is an exact hardware replica of the Mutable Instruments Marbles.

Notes: The Zomo VS-Box Space is a state-of-the-art solution for the storage of vinyls. It captivates with its extraordinary design and high quality. It is laminated with a durable, water-repellent decor available in four different colours.

The Vinyl Box is quick and easy to assemble and the exclusive design will inspire you. This piece of furniture is a real eye-catcher for every living room.

The capacity can vary depending on the thickness of the records.

Technical specifications

Dimensions (W x D x H): 460 x 400 x 370 mm
Weight: 3,7 kg
Format: LPs
Capacity: 100-150
Material: Wood

Notes: The Zomo VS-Box Space is a state-of-the-art solution for the storage of vinyls. It captivates with its extraordinary design and high quality. It is laminated with a durable, water-repellent decor available in four different colours.

The Vinyl Box is quick and easy to assemble and the exclusive design will inspire you. This piece of furniture is a real eye-catcher for every living room.

The capacity can vary depending on the thickness of the records.

Technical specifications

Dimensions (W x D x H): 460 x 400 x 370 mm
Weight: 3,7 kg
Format: LPs
Capacity: 100-150
Material: Wood

Notes: Eventide pedals have long been considered classics in the world of digital signal processing. Their unique algorithms and iconic sound have graced countless hit records over the years, and now these wonderful devices are must-have tool for producers and DJs as well as guitarists.

As a leading manufacturer of protective covers, Decksaver had to create something special to safeguard this latest unit from the guys at Eventide - the H90.

This Decksaver cover is made specifically for the Eventide H90 and is manufactured from super-tough, impact-resistant polycarbonate, providing unparalleled protection against spills, dust, and accidental impacts. It's the perfect addition to your studio or live setup, ensuring that your H90 remains in pristine condition for years to come.

Don't let your investment in the Eventide H90 go to waste. Protect it with a Decksaver cover, and you can rest easy knowing that your unit is safe and secure.

Dimensions

Weight: 0.25 kg
Length: 17.3 cm
Width: 13.6 cm
Height: 3.8 cm

Material: Smoked clear polycarbonate.

WARNING: When your Decksaver cover is in place, please ensure that your equipment is kept away from direct and high heat sources, such as radiators, fires and sunlight.

Notes: Solid State Logic (SSL) is a brand that has been synonymous with high-quality studio equipment for over 40 years.

The new SSL 12 interface is no exception, boasting a sleek design that is packed with advanced features that make it one of the best in the industry.

With 12 channel strips, each with a wealth of controls for equalization, dynamics, and routing, the SSL 12 is the perfect choice for producers and engineers who demand the utmost in precision and flexibility. Whether you're recording a band or mixing a film score, this console has everything you need to create a polished, professional sound.

Your 12 is not just a piece of equipment, but a vital part of your creative process. That's why Decksaver have designed a custom polycarbonate cover that will keep your console safe from dust, spills, and other hazards.

This SSL 12 cover is crafted from ultra-durable polycarbonate, ensuring that it can withstand the rigors of studio life. The cover is precision-molded to fit your SSL 12 like a glove, so you can be sure that it will not only protect your console but also look great while doing it.

With a Decksaver cover, you can rest easy knowing that your console is safe from harm and that you can focus on making great music.

Weight: 0.275 kg
Length: 28.5 cm
Width: 15 cm
Height: 3.5 cm

Material: Smoked clear polycarbonate.

Warning: When your Decksaver cover is in place, please ensure that your equipment is kept away from direct and high heat sources, such as radiators, fires and sunlight.

Notes: The DJ200i is the premium DJ cartridge from hi-fi specialists grado. Hand engineered for a premium quality, rich, warm and unique sound, the DJ200i is built and designed to meet the demanding needs of the professional DJ. A step above anything else in this price bracket, and many cartridges priced significantly higher.

The grado specially engineered transmission line cantilever allows for the ideal transfer of music signal and for safe and effective stylus back-cueing. The prestige model DJ200i uses a modified 4 piece otl cantilever technology, oxygen free wire in the coils and a specially designed, high polished, diamond mounted in a brass bushing for possibly, the most advanced DJ cartridges ever offered to the professional DJ market.

Notes: Quantus Trajecta is a quad envelope designed with polyphony in mind. Quantus Trajecta's envelope structure takes the functionality from Noise Engineering's beloved Loquelic and Cursus Iteritas Percido modules, and adds even more control and mode options like Tremolo and ADSR.

Each parameter is CV controllable, and each control universally adjusts all four envelopes for easy polyphonic tracking. Quantus Trajecta is performable, musical, and most importantly, fun.

Notes: O/O is a tri-use touch patching implement for banana jack modular systems.

1. AllFlesh style expressive touch patching using your body and hands as patch cables between two (or many more) points in your system. Unlike AllFlesh for 3.5mm systems O/O allows for stacking of other cables.

2. Traditional shorting bar.

3. Touchable shorting bar configuration for systems which accept this standard (ie. Buchla Music Easel). Touch in tandem with other singular plug style configurations.

The two different kit choices will supply you with parts for10 single touch points or 5 touchable shorting bars plus 5 touch points. Similar to AllFlesh, these touch points will attenuate voltages through the skin. Each person's skin will have a different amount of attenuation over voltage. Using one hand to touch two points is less attenuation than using two hands to bridge connection. Different modules and systems will also respond differently to touch patching. Results are guaranteed to vary between person to person and system to system.

Soldering along the edges of where the plug meets the plate can be helpful for increased continuity. The tips of the plugs have a collar that can spin around it (egg beater like shape pictured above), if you would like to decrease the touch plate's ability to move from side to side add a small amount of solder to the tip bridging the gap between the spinning collar and tip.

SPECIFICS:

-DIY kit for up to 10x singular touch points or 5x touchable shorting bars and 5 singular touch points

-Immersion Gold touch plates

-4mm gold plated Banana plugs

-Can be patched using skin and/or by stacking cables

NOTICE:

-This is a DIY kit with some soldering required.

-Use only within one system or rack of professionally produced synthesizer modules.

-Use at your own risk, we are not responsible for damage to persons or goods.

-Do not use with other instruments or purposes beyond modular synthesizer patching.

Notes: *** Introducing MPC Stems- March 2024 ***

Akai Professional now introduces the next chapter of sampling innovation and production powered by the groundbreaking MPC Stems bringing sampling into a new chapter.

With MPC Stems, you can access the raw building blocks of any sample or vinyl record, isolating the DNA of any record. Producers can now manipulate the Drums, Bass, Music, and Vocals, opening new creative possibilities.

Akai Professional introduces the ultimate creative workflow with Stems Separation seamlessly integrated into the leading MPC series, powered by MPC 2 Desktop Software.

With MPC Stems, producers and beat-makers can now unlock unmatched sampling creativity by easily isolating drums, bass, music, and vocals from any audio, vinyl recording, or sample revolutionizing the art of sampling.
Experience lightning-fast workflow with superior sound quality, keeping you inspired throughout the creative process.

Slice and isolate samples while maintaining chop regions across each of the four stem layers.

Take complete control with direct manipulation of stem layers from the pads, adjusting volume, pitch, pan, start, and end points with instant responsiveness.

MPC Stems requires MPC 2 Desktop Software running 2.14 or higher, compatible with MPC Live, MPC Live 2, MPC One, MPC One +, MPC X, MPC XSE, MPC Key 37, MPC Key 61, MPC Studio Mk 2 in Controller Mode.


The Power of Sound

Introducing the Akai Professional MPC Key 61, the revolutionary new standalone production synthesizer keyboard powering the next chapter of the MPC legacy. Building on the history of powerful sequencing and revolutionary sampling, MPC Key 61 adds the most advanced next-generation virtual instruments and effects to MPC, adding to its arsenal of industry-leading music production tools. And now, with the addition of a 61-key semi-weighted keybed with aftertouch, the MPC experience ascends to an unprecedented level of creative interaction and expression, delivering the world's most powerful and complete standalone workflow.

Breaking Sound Barriers

Inside MPC Key 61, experience a new dimension of sound like never before. Powered by 25 plugin instrument engines at your fingertips, and with over 6000 cutting-edge presets, MPC Key 61 delivers the most modern-day sound pallet ever programmed in a production synthesizer. Each plugin instrument features advanced synthesis, deep parameter editing, and modern effects developed for a truly inspiring musical experience-all designed with a fast and vibrant touch interface for an intuitive and compelling workflow. Immerse yourself in a world of sound.

Keys to Expression

The MPC Key 61 features an incredibly expressive and playable semi-weighted keybed with aftertouch to drive its world-class sounds with dynamic responsive control. With players and producers in mind, technology and artisanship were combined to breathe inspiration into every performance. The MPC Key 61's keybed is designed to deliver the highest performance experience possible connecting the dots between sound and feel. The 16-velocity sensitive RGB pads on MPC Key 61 are the same award-winning pads as the MPC One. In addition to the iconic MPC pads are the renowned Time Correct, Swing, and Quantize features of MPC that continue to endure as mainstays of modern music production.

Plugin to a World of Effects

MPC Key 61 includes over 100 state-of-the-art effects ready to load across your music productions for mixing and mastering. Insert lush and spacious Reverb & Delay effects to your tracks, add bounce and punch to your drums and mix using modern or vintage style compressors and limiters. Experience plugin FX like never before only inside MPC Key 61. MPC Key 61 is the world's first production synthesizer incorporating modern day vocal FX plugins which can also be used for the most creative sound design.

Touch Strip and Hands-on Control

The onboard assignable Touch Strip Controller is a catalyst for new ways to control, create and interact with your own signature sounds. Dedicated Pitch Bend and Modulation Wheels mean an added touch of expression to elevate your compositions. Bend the notes of your synth and lead sounds in Fabric XL, add gentle vibrato to your stringed instruments in Session Strings, or dial in the speed of the Organ's rotary Leslie cabinet and hear your parts swell with a wide chorused tremolo.

Specifications

Keys: 61 semi-weighted, full-size keys with aftertouch

Pads: (16) velocity- and pressure-sensitive pads, RGB-backlit, (8) banks accessible via Pad Bank buttons

Knobs + Performance Controls: (4) 360- touch-sensitive Q-Link knobs for parameter adjustment, (1) Touch Strip multi-function 5.5" (140 mm) touch-capacitive controller with LED indicators 360- encoder for display navigation and selection via push, (2) Pitch Bend and Mod Wheel, (3) 270- knobs for gain, mix & level adjustment

Buttons: (44) dedicated-function buttons

Display: 6.9" / 176 mm (diagonal), 5.9" x 3.7" / 150 x 93 mm (width x height), Full-colour LED-backlit display with touch interface

Memory: RAM 4 GB, Storage 32 GB (user storage, 13 GB pre-installed content), 4 GB (MPC operating system), 15+ GB free-space for user storage expandable via SATA connections

Power: Via IEC (Included), Auto Switching Internal Power Supply (100-240v)

Connections: (2) XLR+1/4" (6.35 mm) TRS inputs (Input 1/2) (w/ XLR Mic Preamps), (4) 1/4" (6.35 mm) TRS outputs (2 stereo pairs), 1/4" (6.35 mm) stereo headphone output, (1) 5-pin MIDI input, (1) 5-pin MIDI output, (1) 5-pin MIDI thru, (8) 1/8" (3.5 mm) CV/Gate outputs, Ethernet Network port, USB Type-A ports, (1) USB Type-B port

Other Controls: (2) Line | Instrument switches +48v Phantom Power switch 1/4" (6.35 mm) TRS Footswitch jacks (Sustain + FS2) (Variable and switch compatible) 1/4" (6.35 mm) TRS Expression Pedal input

Notes: Polyphony is back!

Chord v2 is a plug and play solution for bringing musical polyphony to your system. It contains four oscillator voices, a multitude of waveforms, and intelligent tuning functionality. This new version features an expanded sonic palette and feature set in half the size of the original.

It features three primary modes of operation: Chord, Free Running, and Unison. These three modes allow the oscillators to be tuned as diatonic chords, run independently of each other, or be tuned to the same internal frequency for external v/oct sequencing through independent CV inputs.

The timbral possibilities of the Chord v2 bring its polyphonic tones to life. The module ships with eight banks of waveforms encompassing traditional shapes, vocal synthesis, organ emulation, and chiptune sounds. You can also load custom wavetables using the SD card slot on the front panel.

From harmonic drones to Switched On Bach, the Chord v2 is an unparalleled addition to any Eurorack modular.

Changes from v1:

- Half the size! 14HP down from 28HP
- Eight banks of waveforms
- Full polyphonic mode
- Harmonize in minor mode
- Custom wavetable compatibility
- Expanded chord types
- Improved synthesis engine

Notes: Unique digital instrument based on bitmask synthesis and resonant filters. Raw and distinctive tones, with notes interacting in unorthodox ways.

Supplier's Notes:
Expressive & Characterful

The Kodamo MASK1 is a musical instrument focused on the interaction between the player and the keyboard. With its exclusive Bitmask engine combined with resonant filters, the MASK1 makes raw, gritty and ethereal sounds that respond in incredible ways to your playing style.

It's not just the notes

Most synths just play the notes you press. Kodamo went a bit further, by looking at how the notes interact with each other. Only by playing the keyboard, you can control when the attacks are triggered, how notes are tied or separated from each other, or if they should keep resonating or stop each other like if they were played on the same string on a stringed instrument. You will discover new ways of playing the keyboard.

Built with love

The MASK1 uses a high quality, 5-octave Fatar keyboard with velocity and aftertouch. It's fully made of painted metal, with two ALPS knobs and 23 KAILH mechanical switches. Everything is assembled in France with high attention to detail. A lot of time was spent on selecting parts and suppliers to balance price and work ethics, while always aiming for the highest quality.

For live and studio players

With its compact size and light weight, the MASK1 will easily fit in your studio and is ideal for gigs. It remembers settings between sessions. With its unique sound, premium keyboard and MIDI connectivity, it can become the main keyboard of your setup.

Explore the sounds

The MASK1 invites you into a zen and relaxed sound exploration. Press a button, turn the knob and listen how the sound changes. The MASK1 is designed to have very few parameters, but well-thought ones. The Bitmask synthesis engine makes rich and warm sounds ranging from classic analogue tones to voice-like formants, glitchy 8-bit noises and ethereal pads. Sounds are fully editable and can be stored in one of the 400 user memory slots. They can be transferred to your computer and shared with other people.

What is Bitmask synthesis?

Bitmask synthesis is the method the MASK1 uses to generate its sound. Internally, oscillators do only have one waveform. Various tones are created by applying what is called a bitmask. This is a technique inherited from computing, which alters a number by masking some of its digits. Here, this technique was adapted to make sound. Bit-masking creates complex wave shapes that are full of harmonics and give the MASK1 its sonic character.

Specifications

Synthesis type: Bitmask, subtractive
Polyphony: 10 voices with optimized allocation
Multitimbrality: 4 parts (5 in layered/split mode)
Oscillators: 2 bitmask per voice with 256 masks each, transpose and detune
Noise: 1 per voice with programmable sample-and-hold frequency
Filter: 1 per voice, two poles (12dB/oct) state variable, self-resonant with pitch tracking and 4 modes (low, high, band pass, notch)
Envelopes: 4 loopable ADSR per voice (osc1, osc2, noise, filter), 3 delta-decay (osc1 mask, osc2 mask, pitch)
LFO: 2 per part with 7 waveforms and noise, delay, decay and 16 destinations
Arpeggiator: 26 patterns with adaptive or fixed chords, latchable, retrig or pitch change modes. Arp do send note events to MIDI out.
Looper: Up to 10000 events, unlimited duration, single track. Records notes, pitch bend, mod wheel, aftertouch and sustain pedal.
Effects: Two stereo effects in series. First effect: chorus, phaser, distortion, bitcrusher, tremolo and ring mod (64 types). Second effect: delay, comb filter, reverb, room simulations and distortion (48 types)
Modulations: Velocity (6 destinations), modulation wheel (16 destinations), aftertouch (16 destinations), LFO1 and LFO2 (16 destinations each)
Play modes: Polyphonic, monophonic, slurred, mono portamento on legato, paraphonic, hybrid poly-mono on legato, slurred paraphonic, mono retrigger, poly retrigger
Split: Configurable split point, balance between voices, transpose, panning and tuning
Layer: Configurable balance between voices, transpose, panning and tuning
Misc: Voice pan spread, polyphonic portamento, keyboard envelope rate scaling
Memory: 120 factory presets, 400 user voices. EEPROM-based (no battery required)
Audio outputs: 2 balanced 1/4" TRS jack, pro audio level with +/-12V internal power supply, 1/4" jack headphones
MIDI: 2 DIN (in, out), class-compliant USB type B, SysEx voice transmit/receive, CC-mapped voice parameters
Keyboard: 61 full-size keys, weighted Fatar action with 6 velocity curves and 6 aftertouch curves
Controls: 23 buttons, 2 rotary encoders, pitch bend wheel, modulation wheel
Display: 4-digit red display
Pedal input: Sustain, 1/4" TS jack, adaptive polarity
Tuning: 400-470Hz. 6 temperaments including arabic tuning.
Size: 89 x 26 x 8cm including knobs and feet.
Weight: 7.5kg
Power: External 12V DC adapter, AC 100-240V in
Chassis: Powder-coated, screenprinted steel. Light grey (RAL 9002) colour
Sides: Black ABS

Notes: Gorgeous experimental system based around Make Noise's brilliant Maths, Morphagene, QPAS and Mimeophon modules. Capture and process sounds in stereo and warp them into new dimensions.

Supplier's Notes:
The Tape & Microsound Music Machine music synthesizer is a small stereo system devoted to capturing external sounds and sculpting them into new ones. The Morphagene operates as a recorder that also allows the artist to mulch, layer and rearrange the sound and manipulate the speed and direction of playback. The Mimeophon repeats sounds and subjects them to further manipulation, and when combined with the Quad Peak Animation System (QPAS), incredible stereo sculpting of the spectrum. The Wogglebug and MATHS work to animate these effects, and the XOH provides a final stereo mix and line level or headphone outputs for monitoring and/or performance.

Notes: Switchy is a module that allows you to turn on or off up to three modules (or busboard) independently of each other.

No need to turn off the whole case: All three voltages (+12V, -12V, 5V) are interrupted at the same time.

Used to reduce the background noise of certain "noisy" digital modules when not in use, to initialize certain modules or change their function, to change an SD card, to relieve the power supply with energy-consuming modules, etc.

Dimensions
6 HP
30 mm deep

Current Draw
20 mA +12V
20 mA -12V
20 mA 5V

Notes: R2M is module 1 of a pair of two 2 HP modules that allow you to connect a chain of controllers to your DROID master through a standard 3.5 mm stereo cable (sometimes also called aux-cable).

The usual idea is that you put all your DROID controllers into a skiff case and mount your DROID master, X7 and G8 into another case, together with all your fancy Eurorack sound modules.

R2C is module 2 of a pair of two 2 HP modules that allow you to connect a chain of controllers to your DROID master through a standard 3.5 mm stereo cable (sometimes also called aux-cable).

The usual idea is that you put all your DROID controllers into a skiff case and mount your DROID master, X7 and G8 into another case, together with all your fancy Eurorack sound modules.

While you could do this with the typical 6-pin ribbon connector (e.g. the 80 cm version that we offer), using the R2M/R2C combination has some serious advantages:

The connection cable can be almost arbitrary long (20 m have been tested and works perfectly).

Since the connection is done on the front of the modules, you can quickly disconnect your skiff for the purpose of travelling to a gig.

You can use a standard 3.5 mm stereo TRS cable for the connection.

These modules are not just passive connectors but contain special driver ICs that transform the electronic voltage levels, which run in the 6-pin ribbon, to something more stable and reliable that is fit for longer distances in a more hostile environment.

The controllers do not receive their power from the master but from the R2C module, which has a power connector and a voltage regulator for that purpose. Each chain of the R2C module provides the same power to its controller chain as the master does (it contains the identical voltage regulator). That means that you can connect up to 32 controllers (!) to one R2C.

Another nice thing: The R2M/R2C combination allows for two of these master / controller connections in parallel. That means that you can have two masters being attached to their individual controller chains. That does not mean, that each of the masters can access each of the controllers at the same time, however. Both master / controller connections work completely separately.

Package contents:
* one R2M module
* one R2C module
* one Eurorack power cable for the R2C
* two 6-pin ribbon cables for connecting the R2M to two masters
* two 3.5 mm stereo TRS cables, approx.. 1.2 m
* 4 red M3 screws for mounting the two modules

Notes: Waldorf draw on their proud history with a new wavetable synth building on the classic Microwave 1 and modern Microwave II/XT. Serious synth power from this eight-voice monster.

Supplier's Notes:
M's musical heart is an eight-voice polyphonic, four-part multitimbral WAVETABLE SYNTHESIZER - as boldly blazoned in red across its full-metal blue- coloured casing, itself hinting at its illustrious Microwave heritage - are two wavetable oscillators with independent wavetable-generating Classic Microwave 1 and Modern Microwave II/XT modes, meaning that the wavetable oscillators behave differently in both of those modes (accessible by pressing the Mode button beside the helpful high-resolution graphic display with four endless encoders for yet more hands-on control).

With M, Waldorf are musically returning to their roots by bringing back classic Microwave and 'modern' Microwave II tone generation as a new-generation classic hybrid wavetable synthesizer with an analogue lowpass 24 dB/Oct VCF - SSI 2144 Improved Ladder Type - with resonance and analogue saturation feature, true stereo analogue VCA with panning option, and much more to explore in a desktop-friendly form factor featuring a wide range of unique sounds. Plentiful presets - totalling 2,048 sound programs (divided into 16 banks, each with 128 sounds) - professionally programmed by world- renowned sound designers also include all of the classic Microwave sound sets, such as MW1 Factory Sound Set, MW1 Soundpool 1-5, the fat-sounding Analogue and Bassco, as well as PPG Wave 2.3 sounds cleverly converted for the original Microwave. Moreover, it also features freshly-programmed sounds utilising M's myriad new features - from true hard Sync (when working in its Modern Microwave II/XT mode) to the ARP (arpeggiator) and MIDI-syncable global LFO (Low Frequency Oscillator).

But beating at M's musical heart as an eight-voice polyphonic, four-part multitimbral WAVETABLE SYNTHESIZER - as boldly blazoned in red across its full-metal blue- coloured casing, itself hinting at its illustrious Microwave heritage - are two wavetable oscillators with independent wavetable-generating Classic Microwave 1 and Modern Microwave II/XT modes, meaning that the wavetable oscillators behave differently in both of those modes (accessible by pressing the Mode button beside the helpful high-resolution graphic display with four endless encoders for yet more hands-on control). Consequently, there is no hard Sync or ring modulation available in the Classic Microwave I mode, where 16-bit wavetables are bit-reduced to 8-bit and a 240 kHz non-anti-aliased sample rate is offered, whereas the Modern Microwave II/XT mode offers a 40 kHz sample rate with band-limited wavetables, although both oscillators - OSC 1 and OSC 2 - offer the same panel parameters.

Two LFOs are generating a periodic waveform with adjustable frequency Rate and Shape that can be used for modulation purposes, are also always at hand. However, unlike other Waldorf synthesizers, there is no modulation matrix in M. Making a conscious design decision to set up M's modulation facilities directly on the corresponding display page, to paying tribute to the 1989-vintage Microwave.

Back in the here and now, M takes performance to a whole new level, thanks to that advanced ARP with 16 preset patterns, chord mode, and an ability to synchronise to MIDI clock. Furthermore, four programmable ENVELOPES allow adventurous users to manipulate sound parameters via rate or timed modulations.

Musically making a connection to the outside world is important to any synthesizer, so M offers six (rear panel-positioned) stereo analogue outputs - arranged as MAIN OUT (L/Mono and R) and AUX OUT (A, B, C, and D), the latter of which can be used to route each of the four Multi (multitimbral) parts to different outputs, if desired; a stereo headphone output (with an associated Volume knob in addition to the topside Master Volume knob); 5-pin MIDI IN, OUT, and THRU DIN connectors, complimented by a USB 2.0 MIDI port (for computer connection to transmit and receive MIDI data); an SD Card slot (for updating M's firmware, importing/saving sound patches, and importing/saving M-specific data, such as user wavetables); and - last but not least - a Kensington compatible security lock slot.

Notes: Polydactyl Versio is Noise Engineering's take on a multiband dynamics processor. Polydactyl Versio is equally at home on single-instrument timbral processing and on end-of-chain gloss. Taking inspiration from Noise Engineering's Librae Legio, Polydactyl Versio applies a unique and transparent algorithm across three bands for maximal dynamic impact. Add in a multiband saturation knob and noise gate, throw in a limiter, and you have a processor that gives ultimate control of color and dynamics.

Polydactyl Versio is part of the Versio family: this platform module can be transformed into a completely different effect by loading a growing number of alternate firmwares, completely free! Plus, with open-source support and documentation at LibDaisy, you can write your own firmware. Grab a Polydactyl Versio and process your signal into submission or total rebellion with three separate bands, saturation, limiting, and noise gating.

Size and power:
10 HP
+12v: 125ma
-12v: 10ma
+5v: 0ma

Notes: 6HP Micromodule of MI Warps.

Notes: An absolute powerhouse of a synth with 16-voice polyphony, stereo architecture and a four-part multitimbral digital sound engine. Built-in sequencers, sample playback and effects make it a true all-rounder.

Supplier's Notes:
MD900 is a polyphonic desktop synthesizer, multitimbral with 4 parts. A polyphony of up to 16 voices are shared by the 4 multi-timbral parts. All of these 4 parts have their own effect stack [Mod-Delay (flanger, chorus, vibrato), Reverb, Tube-AMP, EQ, LP-Filter, DYNAMIC (Limiter) , Stereo Delay ...].

The overall audio path is stereo. Rationally, the oscillator, mixer filter, amps and effects are all in stereo.

Four independent arpeggiator und step sequenzer assigned to each of the four synth parts. The trigger sequencer may trigger the built in transient sample player (Drum Kit .wav) or send triggers to MIDI-Out (USB-DIN or USB-MIDI)

The housing is made of aluminum with real walnut wood on the front and back.

All components are industrial grade. On the operator panel we use precision potentiometer with aluminum covered knobs.

For some parameter entries we use endless encoder without rest.

This kind of encoders feels like a potentiometer.

All of this feels very valuable and it feels great to work with.

The MD900 XVA engine is patch compatible with the M800-R2 synthesizer.

Overview Firmware OS:

The XVA-Sound Engine of the MD900 runs on top of a Linux OS with real time extensions. The overall boot time is < 30 sec.

All contents like Wavetable-, Sample-files, preset and sub-preset files are stored on the internal filesystem.

The filesystem is accessible over ethernet (USB-Lan Adapter).

Managing presets, samples, wavetables configurations & updates are possible and easy to handle.

Operation Panel:

The operation panel gives you real time control to the major voice parameters with a dedicated knob. All parameters are accessible via touch-display and the endless rotary encoders. The part (timbre) has to be selected to alter the parameter on the dependent timbre.

The module specific info display gives the necessary detailed feedback on the parameter changes.

Specifications

Dimensions: 460mm x 295mm x 65mm
Power: External 15V DC power brick 50W
Audio In : 6.3mm stereo jack
Audio Out: Left 6.3mm mono jack, right/left 6.3mm stereo jack
Headphone: 6.3mm stereo jack
MIDI DIN: 1x Midi Input, 1x Midi Output, 1x Midi through
USB 2.0: 2x Hot connect for USB/Ethernet, USB-Midi Host
Pedal SW: 1x Pedal switch input 6.3mm jack
Volume pedal: 1x Standard expression pedal
TFT Display: 5" 800x 480 Colour (24bit) capacitive touch display.
Frontpanel: 37x Potentiometer, 12x linear slider, 12x endless encoder, 30x switches, 42x Leds

Notes: A Comparator is an electronic circuit that compares two voltages and switches its output to indicate which is larger. The Comparator operates between -10 or +10V

The Output is always -10V if below Threshold and +10V if above Threshold.

A Rectifier is an electronic circuit that is used to transform AC signals to an equivalent DC signal while removing one of it's polarities, i.e. Positive rectification excludes negative signals and vice-versa.
Both sections can be used to change the shape of any waveform as well as its harmonic content.

FRONTPANEL:
1 Comparator Threshold Knob
1 Comparator Jack Output
2 Comparator Monitor Led1 Common Signal Jack Input
4 Rectificated Outputs

MECHANICAL:
Format: Eurorack
Width: 4 HP
Depth: 2.5 cm

CONTROL VOLTAGE I/O:
CV inputs: i 10v
CV outputs: i10v

ELECTRICAL:
Max current: 30mA
Compatible with +-12v and +-15v power supplies
Bus Board Cable: 8 × 2 IDC (Doepfer style) connector

Notes: Possibly the best value DJ isolator on the market. Classic three-band design with full kill on each band, allowing you to perform dramatic filter effects. Joe Claussell vibes on a budget.

Supplier's Notes:
3-band frequency isolator with vintage rotary knobs for DJs

With the Omnitronic ISO-23 MK2 frequency isolator DJs get an effective tool for creative sound shaping in the club or studio. Using high-grade, long-life ALPS RK27 potentiometers, the rack-mounted isolator has excellent sound characteristics.

The large, smooth rotary knobs enable DJs to radically boost or cut low, mid or high frequencies, making it easy to create instrumental or a cappella versions. The isolator provides XLR and RCA connectors and features a bypass switch for bridging.

Control range: kill to +9 dB
Lows: 20 Hz - 300 Hz
Mids: 300 Hz - 4 kHz
Highs: 4 kHz - 20 kHz

Bypass switch
Balanced and unbalanced inputs/outputs (XLR/RCA)
Incl. mounting brackets for 483 mm rack installation (1 U)
(19") 48.3 cm rack installation 1 U

Power supply:
100-240 V AC, 50/60 Hz

Power consumption: 12 W

Isolators:
Master Gain:- 8 bis +9
Low/mid 300 Hz, 18db/oct , Butterworth
Mid/high 4000 Hz, 18db/oct , Butterworth

Connections:
Input: 2 x line via 3-pin XLR
Input: 2 x line via RCA (f) mounting version
Output: 2 x line via 3-pin XLR
Output: 2 x line via RCA (f) mounting version

Max. level:
Input: +22 dBu
Housing design:
(19") 48.3 cm rack installation 1 U

Width: 48.3 cm
Height: 4.45 cm
Depth: 14.5 cm
Weight: 2.15 kg

Notes: Bocuma's own line of patch cables. Pack of 5 high quality cables, 3.5mm.

Available in packs of gray or black.

Each package includes:

2x 30cm
2x 60cm
1x 90cm

A good system requires a diet rich in NUDOLS: Organic Patch Cables.

Notes: Bocuma's own line of patch cables. Pack of 5 high quality cables, 3.5mm.

Available in packs of gray or black.

Each package includes:

2x 30cm
2x 60cm
1x 90cm

A good system requires a diet rich in NUDOLS: Organic Patch Cables.

Notes: Optional accessory replacement panel.

Black anodised alu + heavy duty screen printing.

Notes: THE PIPE is a voice / breath / mouth-controlled dynamic FX processor and synthesiser.

It turns your voice into a powerful FX / beat / lead / soundscape synthesizer and it offers unprecedented levels of vocal processing, truly expanding the traditional boundaries of singing. Conventional singing with lyrics is also possible, and you can use the FX to add live modulations to your vocal performance.

Also, you can use the PIPE as a powerful FX processor for an external signal as a synth, drum machine etc.

THE PIPE has 12 different algorithms: ORPHEUS, FILTERRA, SYNTH, REVERB, MADELAY, PULSE, BASSDRUM (three versions), OCTAVA, GENERATOR, HARCHO!

The PIPE consists of the handheld part and a small break-out box with L R output jacks (1/4-inch) and DC IN for power. The handheld part and break-out box are connected by a single cable that contains both output channels and DC power.

The handheld part consists of the contact vocal mic (connected by a standard 1/4-inch jack), electronic components and the controls. You can easily attach a cable extension to the mic which opens up many more options. Attach it to a stand, or put it inside of or on the surface of acoustic instruments such as drums, guitars, trumpets etc. Also, you can use the mic in jack as external in and use the PIPE to process any signals you want.

Notes: Gross, gritty, and dark industrial-strength voice on a swappable oscillator platform. Pangolin approved.

Manis Iteritas Alia is a voice based on the architecture of Basimilus. It was designed to be grittier and more aggressive by using only sawtooth waves that are manipulated, modulated, and distorted through a rethought interface. Manis Iteritas Alia is fantastic for leads, basslines, drums, darkness, detuned swarminess, or pure mayhem. Plus, MIA's dedicated envelope output is a great modulation source for the rest of your patch.

MIA is available on Noise Engineering's 10HP Alia oscillator platform. Buy an Alia module and use the included USB cable to connect to the Noise Engineering Customer Portal to check out any other Alia firmware, free of charge, any time.

A portion of the proceeds of every Manis Iteritas Alia sold goes to pangolin conservation.

Width: 10HP
Depth: 22mm

Notes: This is a 3HP version of the Douts module,

A breakout box for the direct outs of the TexMix. Valid for '4StereoChannels' and '4MonoChannels' version 1.5 & 1.6, for earlier channel expander versions some DIY would be required.

Each module has 8 outputs so it could have 2x '4MonoChannels' connected or 1x '4StereoChannels'.

DOUTS has 3 headers on the back, 2 of them are for 4 Mono Channels, the other one, labeled STEREO, is for 4 Stereo Channels.

Notes: The Touellskouarn "Sil Kontrollet" eurorack module is a LowPass voltage-controlled filter (VCF) The filter is a 12dB per octave low-pass filter that can be self-oscillated, this way it can produce a sine wave with V/Oct tracking capability. This filter has a unique and distinctive sound, characterized by its aggressive resonance and its ability to self-oscillate. Cutoff can be CV controlled. The module is 6HP wide and is made with quality components such as Nichicon/Panasonic caps and alpha pots.

Power consumption: 20mA at +12V and 20mA at -12V

HP : 6

Notes: Most musicians use their feet as an extension of their playing, either pushing piano pedals, sustain pedals, guitar pedals.

However, feet have been underrated while using modulars. In the past ADDAC released a series of modules using sustain and expression pedals for triggering or controlling signals to help breaking the ice. While these are small and still useful for simple uses, ADDAC wanted to create something more specific this time.

This new solution features 5 footswitches and 5 inputs for external expression pedals with independent controls for each.

The aim was to save HP rack space and so created an external floor pedal with all the footswitches and controls, keeping the module HP to the minimum possible featuring only the 10 outputs and the connector to the external floor pedal.

There are many expression pedals in the market and although the most common one is the TRS pedal there are 2 other standards: RTS and TS.

All five ADDAC311 inputs expect TRS pedals, if you're looking into buying one choose a TRS pedal.

If you already have other pedals channel 4 features jumpers that can be switched in order to be used with a RTS pedal.

Channel 5 features a jumper that can be switched in order to be used with a TS pedal.

External expression pedals are required for their outputs to work.

External expression pedals are not included

Notes: Any signal can be expressed in terms of a few parameters: frequency, phase, amplitude and timbre. It is through modulation of these aspects that synthesists create electronic sound. With Generate 3, it is now possible to create a signal and control all its parameters by through-zero modulation within a single 12 HP wide module.

Everything starts with the exceptionally precise triangle-core voltage controlled oscillator (VCO) at the module’s heart. Through-zero linear frequency modulation (FM) enables rich yet pitch-stable FM sounds, by allowing the oscillator to run backwards into ‘negative frequencies’.

The resultant triangle wave is then processed by the through-zero phase modulator, providing a total phase shift range of 900°. Phase modulation offers an interesting alternative for FM, as it enables deep FM-type tones without actually changing the oscillation frequency.

The timbre of a signal is determined by its harmonic content. This full set of harmonics can be grouped into three main parts: the fundamental, even and odd harmonics. Generate 3’s harmonics generator separates out these three timbral ‘channels’. By adjusting their relative amplitudes, a vast array of different waveforms can be created, including but not limited to the classic sine, saw and square waves.

While the amplitudes can be adjusted manually, each timbral channel supports through-zero amplitude modulation, also known as balanced or ring modulation. When audio-frequency modulation signals are applied, the harmonics become ‘split’, enriching the spectrum.

In addition to all the usual analogue synthesis techniques, the extensive set of modulation options makes Generate 3 especially suited for exploring multiphonic synthesis: a monophonic source creating a complex timbre, much like throat singing, yet by electronic means.

Notes: ST.MAR is a 3-channel Stereo Mixer with individual and master volume controls, CV modulation and mute switches. All the basics to blend your stereo signals in only 8HP.

Voltage controls for each channel.

Modulate the volume of each audio source using external control signals, such as envelope generators or sequencers.

Details

Dimensions 8HP - 40×128,5mm
Current 50 mA +12V / 52 mA -12V / 0 mA +5V
Input & Output Signals +/-10V
Impedance Input 47k - Output 10k
Materials PCB and Panel - FR4 1,6mm
Depth 35mm - Skiff friendly

Notes: Strom+ is a strong, reliable and safe 4HP power solution for your modular system. The Strom+ power module includes many safety mechanisms to prevent your modules from being damaged. These include most importantly short-circuit protection, overvoltage protection and a replaceable main input fuse. See the full list below.

Strom+ also offers a current sensing technology that indicates current consumption of your system. LEDs of each rail will turn orange then red, when current consumption reaches or crosses the maximum load of that rail.

Strom+ has extremely low ripple, even under full load. This means better sound and stability for your modules.

One module can power multiple skiffs via Strom Passive Module, a Strom Connector Cable, or a KOMA Strom Busboard.

Technical Specifications

Inputs and Outputs

Output: 1.5A @ +12V | 1.5A @ +5V | 1.0 A @ -12V
Input: 15V, 4.6 A (center positive)

Safety Mechanisms

Replaceable input fuse. Protects the wall-plugged adapter. The KOMA Strom AC/DC adapter actually has its own protection mechanisms and will itself shutdown in most cases before the input fuse trips.
Input overvoltage. Strom+ works up to specification from 15V - 20V input and works out of specification up to 28V input.
Input reverse polarity protection
Output overvoltage protection
Output short-circuit protection
Output over current protection
Output undervoltage protection
All above output protections independent for each rail. If any rail fails, the whole module shuts down.
Connectors and Controls

Main DC-Input (15 VDC)

On/Off switch
Front panel connector to a passive Strom module
2 standard Eurorack 16-pin connectors (for modules or a flying busboard)
Back panel Strom connector to solid busboards

Dimensions

4HP
48mm without Eurorack power connector connected (distribute power via Strom connector cable)
52mm with Eurorack power cable connected

Notes: Steppy is a 4-track programmable gate sequencer with eight internal memory slots, external clocking, numerous tweakable parameters, and a performance-first design aesthetic.

Each track features numerous independent parameters that govern its playback independently of the other tracks. Specifically:

- Each track has its own length, which can range from 1-step to 64-steps, allowing for polyrhythms, fills, or constantly evolving gate interactions between tracks.
- Each track has its own gate length, which ranges from very short to very long, with tied gates possible at the extreme setting.
- Each track has its own clock divider, allowing patterns to play out over completely different periods of time.
- Each track has its own swing setting, which offsets the timing of every other step.
- Each track has its own delay setting, which offsets the timing of every step.
- Each track has its own probability control, which sets the likelihood that each programmed gate will fire when called upon by the pattern.
- Each track can be shifted (or 'rotated') forward or backward by a number of steps. So if you've created a pattern that 'feels' like it has its downbeat on step 3, you can shift that pattern two steps to the left, so that the downbeat sits on step 1.

Tracks can be programmed by entering active steps on the grid or tapped in live as the sequence is moving. Tracks can be selected and modified in real time as the sequence plays. A select button allows you to directly access each track (and each page of 16 steps within that track) directly through Steppy's intuitive multifunction buttons array.

Tracks can be individually muted and unmuted, and a special performance mode (called "Loopy") enables you to touch any two gate steps and instantly create a performance that loops between those steps.

Track patterns can be cleared without clearing its playback parameters, and all track patterns (along with their individual playback and performance parameters) can be saved as a preset to one of eight internal memory slots.

Notes: The Arturia KeyLab series has made a name for itself within the music realm with its cutting-edge innovation within keyboards.

The ability to be used as a keyboard, and to control different sounds, effects, and the unique way it can control any major DAW is a feature very few devices have.

Working with this wonderful unit, we have measured, designed and custom-moulded right here in the UK, a super-tough polycarbonate cover to perfectly fit the contours of this exciting Arturia device.

With years of experience working with plastics, we have created the perfect cover to protect your machine against dust, debris, liquids, smoke and accidental impacts.

This super-durable polycarbonate shells feature extreme durability and offer the highest degree of protection. Dressing your unit in a Decksaver cover should mean you will never have to worry about your Keylab 61 getting damaged at home, in the studio, or at the gig.

Dimensions

Weight: 1.102 kg
Length: 80.1 cm
Width: 30.7 cm
Height: 4.8 cm

Material: Smoked clear polycarbonate.

Notes: The new Preamp Model X comes loaded with a host of new features that make it easy to customize your digital preamp and cab setup. Featuring 3 global cab sim files, support for third-party impulse response files, and 14 preset slots, each with two different channel settings to customize, the Model X offers plenty of space to prepare for long gigs or the freedom to explore and save different tonal combinations.

Where the Preamp Model X excels compared to previous Mooer preamp pedals is in the user interface and digital editor software. The expanded footswitch layout of the X2 gives users two settings to choose from: one for preset scrolling and one for A/B channel switching. This allows users to quickly cycle through presets at just a tap of the foot. The editor software is free and can be downloaded from Mooer's website (www.mooeraudio.com) and allows users the comfort of a desktop interface when customizing and tweaking presets, loading third-party impulse response files, or updating the Model X2's firmware.

The Preamp Model X has been specifically designed to be compatible with files created using Mooer's MNRS sampling technology. Simply download these files from Mooer Studio (www.mooerstudio.com) and load them into your Model X2 using the editor software. The Model X2 is also compatible with Mooer's GIR/GNR cab sim files as well as other major third-party impulse response filetypes.

Specifications:

Input: 1*1/4" Monoaural jack (Impedance value: 1M ohms)

Output: 1*1/4" Monoaural jack (Impedance value: 510 ohms)

Num. of Preset Slot: 14

Num. of Factory Amp Model: 28 (Can be replaced by imported GNR file)

Num. of Factory Cab Sim: 3 (Global cab sim, can be replaced by imported GIR/IR file)

IR Spec: 44.1kHz/24bit/1024points

Power supply: 9V DV center negative (Please ensure the voltage value of power supply is not more than 9V, ensure the polarity is correct.)

Current Draw: 300mA

Weight: 0.334kg

Dimensions: 75mm(D)*115mm(W)*33mm(H)

Accessories: Owner's manual, USB TYPE-C to TYPE-A cable; DC 9V power supply, sticker.

Notes: An 8hp version of the retired Mutable Instruments Grids. It is an identical functional clone, so it will behave in the same was as the full size version, and will run any firmware that runs on the full size version.

Notes: The Jumble Henge is a 16 input stereo spectral mixer with a unique patch-based mixing interface in a compact space. Each input has a carefully tuned resonant analog filter and a unique fixed pan value, providing each sound its own space within the mix. There is a Mix control to adjust the depth of the filtering and a clean external stereo input for chaining with another mixer or extra sound source. Jumble Henge is a space efficient solution for creating rich stereo mixes from a number of both mono and stereo sources.

INPUTS
Vertical and horizontal patch position determines a source's spectral and stereo placement in the mix respectively.

Aside from centred inputs, every input sits in its own unique pan position, helping to keep a separation between sounds but building a complete stereo image when combined.

The centre right inputs of the top two rows are normalised to the centre left inputs. - i.e if just a left input is patched it will be effectively panned center.

Towards the highs the panning becomes wider - as the human ear better pinpoints direction at higher frequencies, whereas the lows remain more centred for a tighter, more focused sound.

MIX CONTROL
Mix control for the overall depth of the filters applied to the inputs. Note: a slight volume increase occurs near the centre of the dial.

EXTERNAL INPUT
An additional clean stereo input pair for chaining with another mixer or additional source. Right input normalised to left input to accomodate mono sources.

OUTPUTS
Stereo mix output, the sum of all 16 inputs.

Jumble Henge was designed in collaboration with Worng Electronics and is based on the 'SoundStage'.

Technical Specifications

Supply: +12V 70mA / -12V 70mA

Size: 8HP

Depth: 38mm

Notes: The Flex premium broadcast-style boom arm is a key element to any ergonomically sound, clutter-free setup. An internal spring design and integrated cable routing channel deliver seamless design and operation while remaining visually appealing. Content Creators, Podcasters and Musicians can all benefit from the freedom and efficiency achieved by the Flex. Flex is the perfect solution for many of MXL's most popular microphones like the 770, 990, and BCD-1.

Gone are the days of that clunky boom arm drooping down while trying to record the perfect podcast. Flex's internal suspension system and adjustable weight calibration ensure that your mic will stay put so you can keep your focus on creating. A sleek, modern design allows you to add the functionality of a boom arm without the eyesore of another "thing".

Boom: Extruded Aluminum

Mount: Desktop C Clamp

Rotation: 360 degrees

Max Reach: 32"

Mount thread: 5/8" threading with a 3/8" adapter

In the box:

Flex boom arm
C-Clamp for desktop
3/8" to 5/8" adapter

Notes: Lovely little mono filter module in a compact desktop format. Based on the classic Prophet 5 filter, ideal for processing synths and signals, hooking up to Eurorack or other Hungry Robot modules.

Supplier's Notes:

The Hungry Robot VCF is an all analog, 4-pole low pass filter with a self-oscillating resonance control. It is a close replication of the filter circuit found on the famous Prophet 5. It uses a HM2040 which is a high quality, faithful replication of the original SSM2040 chip. This resonant filter has a beautiful tonal quality. The over-sized knobs provide a satisfying tactile response. The cutoff frequency can be controlled by external control voltage. It has a built-in attenuator and invert switch for the incoming CV. CV input does not track at 1V/Oct, but is scaled to act as a VCA when a 5V signal is applied to CV input. As with all Hungry Robot "Modular Boxes" the VCF can be powered by a simple 9V DC, Negative Center power supply.

KNOBS
-FREQUENCY: Sweeps the cutoff frequency of the filter.
-CV: Attenuator for incoming CV input.
-RESONANCE: Sets resonance of filter. Small volume drop is to be expected. Will self-oscillate at higher settings.

SWITCHES
-INVERT: Inverts the incoming CV input. Toggle to the right to invert incoming CV

PATCH POINTS
-IN: Patch Audio Signal In
-CV: CV input for Frequency. Allows for CV control of this parameter.
-OUT: Patch Audio Signal Out

Dimensions: 4.7" x 2.6" x 1.5"
Power: 9V DC - Negative Center - 2.1mm Barrel

Notes: The Hungry Robot Sample & Hold provides basic S&H functionality with some added bells and whistles. It uses an internal clock dialed into a very useful range. If the internal clock rate is not to your liking, you can bypass the Rate knob by patching a clock signal into Clk In. The Sample & Hold has a built in attenuverter giving a bit of added control over the random voltages that are outputted. White noise out for uses elsewhere. Traditionally a S&H samples voltages from chaotic white noise, but E.In allows you to bypass the white noise and patch in your own sample source (i.e. patching an LFO in for a bit crushed LFO). As with all Hungry Robot "Modular Boxes" the Sample & Hold can be powered with a simple 9V DC, Negative Center power supply.

KNOBS
-MINUS/PLUS: Attenuverter for output. Allows you to sweep between positive and negative voltage outputs.
-RATE: On board clock source ranging from approximately 25ms to 1000ms.

PATCH POINTS
-E.IN: Bypasses internal white noise as a sample source. Patch in any CV source that you want to sample from
-STATIC: Taps into white noise output (0-5V range)
-CLK IN: Bypasses internal clock with your provided external clock
-S&H OUT: Two buffered outputs of S&H voltage

Dimensions: 4.7" x 2.6" x 1.5"
Power: 9V DC - Negative Center - 2.1mm Barrel

Notes: The ADE-50 provides 3 all-analogue voltage controlled amplifiers based on a modern operational transconductance amplifier design.

The VCA's are designed to provide a good balance between the performance and specification of modern 'on-chip' VCA's and the character and musicality of classic analogue designs.

The OTA core of each VCA is fully discrete - it is built from only resistors, capacitors and transistors - however, the CV conditioning, audio input and output stages are built using high-quality op-amps giving the best balance between musicality, character and performance.

The ADE-50 provides a good signal-to-noise ratio, linearity, attenuation, an output level at unity gain at 5V CV input, minimal CV 'bleed' and minimal output offset/bias.