搜索结果

Notes: ***B-STOCK: Box opened, product unused & in perfect condition***


Equipped with the same ESS Sabre32 Ultra DAC Technology found in audio interfaces costing thousands, the M4 delivers an astonishing 120 dB Dynamic Range on its main outputs. ESS converters also drive the headphone output, which rivals dedicated headphone amplifiers costing hundreds. Ultra-clean preamp circuits produce a measured -129 dBu EIN on the mic inputs. Capture and monitor your audio with pristine clarity.

The M4 provides best-in-class speed for monitoring live inputs (mic, guitar or keyboard) through your computer, thanks to MOTU's expertly engineered USB drivers, which deliver class-leading, ultra-low 2.5 ms Round Trip Latency (at 96 kHz with a 32 sample buffer).

When recording and mixing, nothing is more critical than achieving optimum levels. The M4 is the only audio interface in its class with a full color LCD featuring clear, detailed level meters for all inputs and outputs. Enjoy professional-level volume control and feedback to get your sound just right.

The M4 driver provides convenient loopback channels to your host computer, so you can easily route computer output back to the computer, where you can mix it with live mics and/or guitar inputs from the M4 in your host software for live streaming or podcasting. Streaming and podcasting has never been easier and better-sounding!

Decades of award-winning product engineering for hit songs, mega tours, primetime shows and blockbuster movies goes into every MOTU audio interface.

Notes: Equipped with the same ESS Sabre32 Ultra DAC Technology found in audio interfaces costing thousands, the M4 delivers an astonishing 120 dB Dynamic Range on its main outputs. ESS converters also drive the headphone output, which rivals dedicated headphone amplifiers costing hundreds. Ultra-clean preamp circuits produce a measured -129 dBu EIN on the mic inputs. Capture and monitor your audio with pristine clarity.

The M4 provides best-in-class speed for monitoring live inputs (mic, guitar or keyboard) through your computer, thanks to MOTU's expertly engineered USB drivers, which deliver class-leading, ultra-low 2.5 ms Round Trip Latency (at 96 kHz with a 32 sample buffer).

When recording and mixing, nothing is more critical than achieving optimum levels. The M4 is the only audio interface in its class with a full color LCD featuring clear, detailed level meters for all inputs and outputs. Enjoy professional-level volume control and feedback to get your sound just right.

The M4 driver provides convenient loopback channels to your host computer, so you can easily route computer output back to the computer, where you can mix it with live mics and/or guitar inputs from the M4 in your host software for live streaming or podcasting. Streaming and podcasting has never been easier and better-sounding!

Decades of award-winning product engineering for hit songs, mega tours, primetime shows and blockbuster movies goes into every MOTU audio interface.

Notes: Exciting home studio interface from one of the leading names in high-end studio tech. 2-in, 2-out design with high quality pre-amps and a 'Legacy 4K' option to add analogue flavour. Full review coming soon.

*** New Loopback feature - May 2023 ***

Loopback allows you to take the output audio stream from your SSL 2 or SSL 2+ and record it back into the DAW (or another application). This can be really useful for music makers, podcasters and streamers.

To take advantage of the new loopback feature of the SSL 2/2+ you will need to update your SSL2/2+ using the SSL USB Audio Firmware updater.

Supplier's notes:
Solid State Logic studio tools have been at the heart of music production for over 40 years, helping world famous artists, producers and studios to create so many of the records you've come to know and love. Now, with SSL 2+, you get all that hit-making know-how in your own personal studio.

With beautifully SSL-designed analogue microphone preamps and immaculate 24/192kHz conversion for studio-quality recording, pristine monitoring paths and high-performance headphone amps for crystal-clear playback and an intuitive front-panel low-latency monitor mix control, you're always ready to capture the next great performance.

The 'Legacy 4K' mode - inspired by classic SSL consoles, gives you the ability to add extra analogue character and sparkle to your sources when needed.

To top it all off, the included 'SSL Production Pack' software bundle, which includes some of SSL's own studio-grade Native plug-ins and a carefully selected range of DAWs, samples, loops and virtual instruments from industry leaders, gives you an incredible arsenal of tools for creating your next hit.

2X Class-Leading Mic Preamps (130.5dB EIN / 62dB of Gain)
Pro-Studio Quality Neutrik Connectors and Alps pots
2X High Current Headphone Amp with independent monitor mix
24-bit / 192 kHz AKM Converters
Legacy 4K Analogue Enhancement - Inspired by SSL4000 series console
MIDI I/O
Additional un-balanced Outputs for DJ Mixers
SSL Production Pack - Exclusive software bundle
Advanced Workflow Technology utilised in ergonomics, layout and metering

Notes: mioXM - more connectivity than you can shake a stick at.

With mioXM it's never been easier to get all of your MIDI gear talking to each other. Harness the power of iConnectivity advanced computer and network connectivity and experience why mioXM redefines what a MIDI interface can and should do.

Connect all your MIDI devices (USB-MIDI, DIN-MIDI, RTP/Network-MIDI) and let this rugged, versatile interface put you in control of your MIDI devices and workflow.

On stage or in the studio, RTP/Network-MIDI capability means you are no longer constrained by cable length or limited USB ports. Stack multiple interfaces and computers on a network for ultimate scalability and flexibility.

With mioXM, you're able to streamline and expand your MIDI setup, and do it faster, better, and in creative and exciting new ways.

What makes mioXM unique? The iConnectivity difference.

Powerful network MIDI capabilities:

Network connectivity means MIDI wherever you need it. Regular USB connectivity limits you to keeping your interface within 15ft of your computer. Network / Ethernet connectivity gives you up to 330ft / 100m connection between you and your interface.

Drop an interface in every room of your studio, or place an interface virtually anywhere in a venue.

RTP/Network-MIDI is not bound by some of the same restrictions as USB-MIDI.

Easy renaming of network ports - have them show up the way you want them to in your DAW.

Access to more than12 ports per interface.

iConnectivity's unique network technology is as easy to use as USB! Enjoy your new-found MIDI power without extra headaches.

Use your 12 network MIDI ports anyway you want. Connect each of the 12 RTP-MIDI sessions to any combination of physical or virtual I/O ports. Almost any combination is possible.

Configuring mioXM:

Introducing a new version of iConnectivity's Auracle control software: taking the simplicity of workflow that the original Auracle introduced but now with the added deep configuration functionality that iConnectivity become known for. All the deep configuration options you asked for: MIDI merging, filtering, remapping, and deep routing are all there and super easy to use.

Presets onboard:

Need to configure your MIDI setup in multiple ways? No problem!

Store and recall up to 4 presets directly on the interface, without even needing a computer!

Easily recall unique MIDI routing, filter and merging setups to preset scenes, all from the front of mioXM.

What's in the box
1 x mioXM
1 x USB cable
1x Ethernet cable
1 x mioXM 12V 36W Power Power Supply with interchangeable blades (NA, EU, UK and AU (Australia only)).

Device Specifications:

Width: 214 mm/8.43 in
Height (1U): 37 mm/1.46 in
Depth: 140 mm/5.51 in
Weight: 992g/2.13 lbs

mioXM fits comfortably in iConnectivity's iCRS Interface Rack Shelf

System Requirements

Macintosh
Mac OS X 10.11 or greater
1 free ethernet or USB port

Windows
Windows 10 or greater
1 free ethernet or USB port

iOS
iOS 8 or greater with Camera Connection Kit (CCK)*
CoreMIDI compatible app

Notes: Feature-packed interface and control surface bundled into one box, allowing you to get audio in and out of your software while also taking control via a long channel fader, transport controls and more

Supplier notes:
When you're a solo artist, you have to be more than just creative to realize your visioniyou must also be a producer and an audio engineer. The ioStation 24c audio interface and production controller provides the tools needed for all of these diverse roles in a compact, ergonomic desktop design that will fit into any home studio. Record your audio through two pristine XMAX mic preamps and high-definition 24-bit, 192 kHz analog-to-digital converters. Navigate your recordings with easy-to-use transport controls. Edit your production and automate parameters in your favorite DAW with the powerful Session Navigator and mix it all with a 100 mm touch-sensitive motorized fader. Whether you're a musician producing your latest album or just getting started with your first podcast, the ioStation 24c gives you all the tools you need to record and mix with the ease of hands-on, tactile control- all in a single device that doesn't clutter your creative space.

Audiophile-grade digital converters and transparent preamps create a superior recording and listening experience. The ioStation 24c audio interface features two of PreSonusr' acclaimed XMAX Class A analog microphone preamps that deliver incredibly high headroom, deep lows, shared smooth highs, and a rich overall sound- you'll hear every breath, transient, and detail in your recordings. High-quality converters provide 115 dB of dynamic range to capture complex musical harmonics smoothly and naturally. The result is clear, consistent audio that makes mixing easier and creating a polished sound faster.

Rather than forcing you to reinvent your mixing method, the ioStation 24 augments the way you currently mix. You will still use your faithful keyboard and mouse for things they do well, while the ioStation 24c handles what you really want to get your fingers on: your mix. This is DAW control the way you always hoped it could be!

Streamlined workflow and support for the Mackie Control and HUI protocols make it fast and easy to control Pro Tools, Logic Pro X, Cubase, Ableton Live, and more. No driver installation is necessary; just plug in your ioStation 24c and take command of your mix. Deep integration with the included PreSonus Studio Oner Artist will let you mix at lightning speed.

Seamlessly integrated with the included PreSonus Studio One Artist music production software, the ioStation 24c audio interface works with virtually all macOSr and Windowsrx recording software. Easy to learn, Studio One enables you to compose, record, and produce without getting distracted by the tools or hemmed in by track limitations. Need a new loop or sample for your latest production? Studio One lets you shop, audition, and purchase new content and upgrades without even opening your browser- you'll build the version of Studio One that's right for you. By combining a flexible single-window user interface with a modern, beat-based production workflow, Studio One's drag-and-drop approach doesn't dictate how you work or what you work on; you do.

The ioStation 24c's unique Session Navigator is your caffeine-fueled assistant engineer, providing easy access to eight mission-critical functions for maximum flexibility. Use the large encoder button and companion buttons to edit and mix with greater efficiency and speed. Scroll through your timeline using the encoder or work measure-by-measure with the arrow buttons; zoom in and out on the timeline with the encoder and make your tracks larger or smaller with the arrow buttons; navigate and drop markers; and maintain constant control of your main level. Once you start using the Session Navigator, you'll wonder how you mixed without it.

Whether you're just getting into audio production or looking to streamline your recording rig, the ioStation 24c audio interface and production controller will give you clear, clean, ultra-high-def sound with professional mixing tools in a compact, space-saving design. While it's a perfect companion for any recording software, the ioStation 24c and included Studio One Artist provide you with a complete, affordable recording solution that will make you sound great.

This suite of plug-ins adds a wealth of fresh virtual instruments and effects to Studio One. Cherry-picked from the first names in virtual instruments and effects, each plug-in brings a different flavor of practical magic to your songs. These plug-ins aren't gimmicky one-trick ponies i these are real-deal workhorses that you'll rely on for countless mixes.

Notes: Since we pioneered guitar amp & effects modelling in 2002, IK Multimedia has spent more time studying guitar and amp recording than possibly anyone else on the planet. Modelling over 400 pieces of gear has required tens of thousands of hours painstakingly measuring the interactions between instruments, pickups and amplifier circuits, not to mention the cooperation of the world's most iconic guitar players, amplifier manufacturers, and engineers to learn how to create and capture great guitar tones.

AXE I/O brings all that experience to you.

AXE I/O is a professional 2 in/5 out audio interface - and controller - designed specifically with the needs of the recording guitarist in mind, providing best-in-class sound quality and powerful features aimed squarely at making your recordings faster, easier and better than ever.

AXE I/O offers an exclusive triple-topology, fully discrete input circuit, with both PURE and JFET input stages, to go from transparent to tube-like with just a single switch.

Its patent-pending Z-Tone impedance-adapting circuit interacts with your guitar's pick-ups to give you a massive range of tonal flexibility, you've never heard before.

Plus AXE I/O includes a dedicated Amp Out, so you can process your recording with real guitar amps and stomps without the need for external accessories (and without having to unplug your existing connections!). This low-noise out also eliminates ground loops, to keep even the highest-gain re-amplification as quiet as possible.

And AXE I/O seamlessly integrates with the included AmpliTube 4 Deluxe to select presets and control values via the front input knob, and lets you connect pedals and switches to get the most from your virtual rig without ever taking your hands off your axe.

We even included an onboard tuner so you can be ready to record in an instant whenever inspiration strikes.

Every element of AXE I/O has been created with no-compromise quality and real-world usefulness.

It's the interface we wish we'd had all along.

Notes: *** B-STOCK: Box opened, but product is in excellent condition and in perfect working order ***


Field recorder meets interface in this clever offering from IK's iRig range. Essentially a 4-in/2-out audio and MIDI interface with built-in mics, the Quattro is portable, versatile and high quality.

Supplier's Notes:
Pro recording and performing, in the palm of your hand

iRig Pro Quattro I/O is a professional-quality 4 in / 2 out portable audio and MIDI interface packed with everything needed for field recording and content creation, for serious sound and flexibility - anywhere.

Small enough to fit in the palm of your hand, the iRig Pro Quattro I/O still packs in four high-quality, low-noise mic preamps; instrument, RCA and TRS inputs; plus XLR balanced, 3.5mm stereo and headphone outputs - and full MIDI I/O!

iRig Pro Quattro I/O works right out of the box with iPhone, iPad, Android, Mac and PC, but can also serve as a stand-alone mic preamp or line mixer, with a built-in limiter and direct monitoring so you're always guaranteed the perfect take.

Packed with a swiss-army-knife's worth of tools, iRig Pro Quattro I/O ensures you're ready for anything, anywhere.

As a mobile interface

Connected to a computer or mobile device, the iRig Pro Quattro I/O will work as a high-quality, multi-channel audio and MIDI interface with a full array of inputs and outputs so you'll always be prepared for any recording or need. Fully MFi-certified, no adaptors are required for iPhone or iPad for reliable field performance on any device.

As a broadcast / podcast interface

Enable STEREO mode and iRig Pro Quattro I/O mixes all sources down to stereo for streaming or recording. Monitoring is easy thanks to a dedicated headphone output with independent volume control and direct monitoring. Or use MONO mode for streaming to social media; Loopback lets you duet your favourite videos easily.

As a field recording interface

With an onboard microphone and optional stereo mic capsules, iRig Pro Quattro I/O turns your iPhone, iPad, Android device into a full-featured, professional field recorder.

As a stand-alone mixer

iRig Pro Quattro I/O also works as a preamp and mixer: just power it via battery, USB or DC IN and use the full set of inputs/outputs to capture and mix multiple sources to your DSLR camera with professional quality.

Always perfect recordings with the safety backup channels

In STEREO and MONO mode, inputs 3 and 4 can be used as safety channels: recording the same signal as input 1 and 2 but reduced by 12dB as a backup in case the sound source unexpectedly overloads the main channels.

Audio quality without compromise... wherever you are

Up to 24-bit, 96 kHz sample rate Ultra-low-noise mic preamps with full +48v phantom power Professional-quality, transparent A/D and D/A conversion Built-in limiter, for input 1-2, to protect against clipping Multitrack, stereo or mono internal mixdown.

Specifications

Microphone Input
Microphone Input: balanced female 3-pin, XLR. Pin 2: hot / Pin 3: cold / Pin 1: ground
Microphone Input Level: from 6 mVpp to 1.4 Vpp
Microphone Input Impedance: 3.2 kOhms
Gain Range: 40 dB
Phantom Power: +48V i 4V
Frequency Response: 20 Hz - 20 kHz +/-1.5dB
Input Noise: -103 dB(A), -97 dB RMS

Instrument Input
Instrument Input: unbalanced, Hi-Z, TS 1/4" Jack, Tip: signal / Shield: ground
Instrument Input Level: from 30 mVpp to 6.9 Vpp
Instrument Input Impedance: 1 MOhms
Gain Range: 27 dB
Frequency Response: 20 Hz - 20 kHz +/-1.5dB
Input Noise: -103 dB(A), -97 dB RMS
Stereo Headphone Output
Connector: 1/8" TRS Jack. Tip: right / Ring: left / Shield: ground
Headphone Level Control numbered thumbwheel
Headphone Level Power 100mW into 50 Ohms

Stereo Headphone Output
Connector: 1/8" TRS Jack. Tip: right / Ring: left / Shield: ground
Headphone Level Power 100mW into 50 Ohms

MIDI Input/Output
Connector: 2x2.5mm TS Jack
Other Input/Output
DC barrel: 1x DC barrel. For power and device charging.
Device Connector: mini-DIN

Common
Conversion: 24-bit A/D, 24-bit D/A
Sampling Rate: 44.1 kHz, 48 kHz, 88.2 kHz and 96 kHz

Power:
- USB bus powered when used with a computer
- Battery powered (2xAA included) when used with an iOS device
- DC power supply (not included, iRig PSU 3A sold separately)*

Package includes
iRig Pro I/O universal Audio-MIDI interface
Lightning to Mini-DIN connection cable with charging features (60cm/23.62")
USB-A to Mini-DIN connection cable (60cm/23.62")
USB-C to Mini-DIN connection cable (60cm/23.62")
2.5mm TRS male to MIDI female adapter (10cm / 3.9")
2 x 1.5V AA Battery
Velcro strip

Dimensions
Size: 43mm/1.69" x 127mm/5" x 37mm/1.46"
Weight: 120g/4.23oz (batteries excluded)

Notes: Record your voice, guitar, piano, synth, or any audio, and create great-sounding tracks with a plug-and-play bundle that does it all. For beginners, songwriters, content creators, and everyone in between, the MiniFuse Recording Pack gives you professional sound in a simple, fun, creative package - whatever your style.

Your recording all-in-one

Whether you're a beginner music maker, a content creator, a producer with limited space, or a musician on a budget, enjoy a pro-grade recording bundle for vocals, guitars, percussion, and more - without breaking the bank.

Plug-and-play interface

MiniFuse 2 gives you 2 audio inputs & outputs, MIDI for connecting synths & drum machines, and easy to use controls that work right out the box. Recording has never been so easy.

Make your voice heard

Capture your voice & instruments with supreme clarity without hassle. Follow the included step-by-step guide to connect your CM1 cardioid microphone and get recording - it even comes with a shockmount & pop filter to keep your recordings clean & noise-free.

Hear your sound come to life

Monitor your mix in studio-grade detail and comfortably smash out long sessions with the included EF1 closed-back monitoring headphones, great for production, live recording, and even just listening at home or on the move.

DAW music creation, your own way

Enjoy the most versatile & inspiring software bundle at this price point. From an introduction to an industry-standard DAW to a range of creative effects and audio enhancing tools, take your production to another level

Main Features

All-in-one audio interface recording bundle
Premium software bundle included
Analog Lab Intro with 500 vintage & modern keyboard presets
Rev PLATE-140 reverb
Pre 1973 vintage preamp
Delay TAPE-201 echo
Chorus JUN-6 analogue chorus
Ableton Live Lite

2 x combo Mic/Inst/Line XLR Input with 48V phantom power
2 x 1/4'' TRS balanced line outputs with volume control
1 x stereo headphones output with volume control
1 x 5-pin MIDI input & output
1 x USB2 type A hub (250mA max.)
1 x stereo virtual loopback channel
USB-C interface compatible with PC and Mac
Bus-powered

Microphone
Capsule: Condenser (Cardoid)
Sensitivity: -36 dB +3 dB (0 dB = 1 V/Pa at 1 kHz)
Frequency response: 20 Hz to 20kHz

Headphones
Type: Closed-back
Drive diameter: 40 mm

MiniFuse 2
2x Inputs
2x Outputs
1x Headphone
1x MIDI I/O

Subscriptions - Complimentary introductions to audio & mixing services:
Splice Creator Plan
Auto-Tune Unlimited

What's in the box

Box content:
MiniFuse 2 Unit
USB-A to USB-C cable
CM1 cardioid microphone with shockmount & pop filter
EF1 closed-back monitoring headphones with adapter
3m XLR cable

Platforms requirements

Windows
Win 10+ (64bit)
2.5 GHz CPU
4 GB RAM
2GB free hard disk space
OpenGL 2.0 compatible GPU

Apple
Mac OS 10.13+
2.5 GHz or Apple Silicon CPU
4 GB RAM
2GB free hard disk space
OpenGL 2.0 compatible GPU

Notes: SSL Recording Pack

Condenser mic, shock mount, studio headphones and XLR cable

Step Up Your Recording Game

Introducing the SSL Recording Pack from Solid State Logic, the all-in-one solution to capture your ideas and record great music. Available in a bundle with an SSL 2 interface, the SSL Recording Pack includes a condenser microphone with shock mount and thread adapter, closed-back studio headphones and an XLR microphone cable, bringing you everything you need to record with your SSL 2 interface.

Recording Made Easier

SSL Recording Pack includes everything you need to start recording now. Just plug your SSL microphone and headphones to your SSL 2 interface and start turning your ideas into records.

SMC 80 Studio Microphone

Capture every detail and nuance of your vocals, guitars and acoustic instruments with the SMC 80 studio condenser microphone.

SHP 20 Headphones

Listen with clarity and detail. Hear every step of your recording and production process with SHP 20.

Included with SSL 2 Interface

Bring Your Productions To The Next Level

The SSL 2 Interface include the acclaimed SSL Production Pack, featuring a selection of must-have virtual instruments, plug-ins, samples and DAW, to let your creativity shine and bring your productions to life.

What's in the Kit

SSL 2
SSL headphones (including 1/4" jack adapter)
SSL condenser microphone, shock mount and thread adapter (5/8" outer and 3/8" inner) for microphone stands
2.5 M XLR microphone cable

Specifications

SHP-20 Headphones
Operating Principle: Closed
Fashion: Supra-aural Transducer Type Dynamic
Loudhailer: 50mm
Impedance: 32 O
Sensitivity: 98 +/-3dB
Frequency Response: 15Hz-25kHz
Max. Power: 1200mW
Rating Power: 300mW
Cable: About 3m (straight)
Plug: 3.5mm + 6.3mm

SMC-80 Microphone
Element: 25mm condenser capsule
Polar Pattern: Cardioid
Frequency Response: 20Hz-20kHz
Sensitivity: -36dB+/-2dB (0dB=1V/Pa at 1kHz)
Output Impedance: 200+/-30% (at 1kHz)
Load Impedance: >1000 O
Self-Noise: 16dB A
Max. Input SPL: 136dB (at 1kHz<1% T.H.D)
S/N Ratio: 78dB
Phantom Power Requirement: 48V DC Phantom Power
Weight: ~340g
Dimensions:55x38x165mm

Notes: Field recorder meets interface in this clever offering from IK's iRig range. Essentially a 4-in/2-out audio and MIDI interface with built-in mics, the Quattro is portable, versatile and high quality.

Supplier's Notes:
Pro recording and performing, in the palm of your hand

iRig Pro Quattro I/O is a professional-quality 4 in / 2 out portable audio and MIDI interface packed with everything needed for field recording and content creation, for serious sound and flexibility - anywhere.

Small enough to fit in the palm of your hand, the iRig Pro Quattro I/O still packs in four high-quality, low-noise mic preamps; instrument, RCA and TRS inputs; plus XLR balanced, 3.5mm stereo and headphone outputs - and full MIDI I/O!

iRig Pro Quattro I/O works right out of the box with iPhone, iPad, Android, Mac and PC, but can also serve as a stand-alone mic preamp or line mixer, with a built-in limiter and direct monitoring so you're always guaranteed the perfect take.

Packed with a swiss-army-knife's worth of tools, iRig Pro Quattro I/O ensures you're ready for anything, anywhere.

As a mobile interface

Connected to a computer or mobile device, the iRig Pro Quattro I/O will work as a high-quality, multi-channel audio and MIDI interface with a full array of inputs and outputs so you'll always be prepared for any recording or need. Fully MFi-certified, no adaptors are required for iPhone or iPad for reliable field performance on any device.

As a broadcast / podcast interface

Enable STEREO mode and iRig Pro Quattro I/O mixes all sources down to stereo for streaming or recording. Monitoring is easy thanks to a dedicated headphone output with independent volume control and direct monitoring. Or use MONO mode for streaming to social media; Loopback lets you duet your favourite videos easily.

As a field recording interface

With an onboard microphone and optional stereo mic capsules, iRig Pro Quattro I/O turns your iPhone, iPad, Android device into a full-featured, professional field recorder.

As a stand-alone mixer

iRig Pro Quattro I/O also works as a preamp and mixer: just power it via battery, USB or DC IN and use the full set of inputs/outputs to capture and mix multiple sources to your DSLR camera with professional quality.

Always perfect recordings with the safety backup channels

In STEREO and MONO mode, inputs 3 and 4 can be used as safety channels: recording the same signal as input 1 and 2 but reduced by 12dB as a backup in case the sound source unexpectedly overloads the main channels.

Audio quality without compromise... wherever you are

Up to 24-bit, 96 kHz sample rate Ultra-low-noise mic preamps with full +48v phantom power Professional-quality, transparent A/D and D/A conversion Built-in limiter, for input 1-2, to protect against clipping Multitrack, stereo or mono internal mixdown.

Specifications

Microphone Input
Microphone Input: balanced female 3-pin, XLR. Pin 2: hot / Pin 3: cold / Pin 1: ground
Microphone Input Level: from 6 mVpp to 1.4 Vpp
Microphone Input Impedance: 3.2 kOhms
Gain Range: 40 dB
Phantom Power: +48V i 4V
Frequency Response: 20 Hz - 20 kHz +/-1.5dB
Input Noise: -103 dB(A), -97 dB RMS

Instrument Input
Instrument Input: unbalanced, Hi-Z, TS 1/4" Jack, Tip: signal / Shield: ground
Instrument Input Level: from 30 mVpp to 6.9 Vpp
Instrument Input Impedance: 1 MOhms
Gain Range: 27 dB
Frequency Response: 20 Hz - 20 kHz +/-1.5dB
Input Noise: -103 dB(A), -97 dB RMS
Stereo Headphone Output
Connector: 1/8" TRS Jack. Tip: right / Ring: left / Shield: ground
Headphone Level Control numbered thumbwheel
Headphone Level Power 100mW into 50 Ohms

Stereo Headphone Output
Connector: 1/8" TRS Jack. Tip: right / Ring: left / Shield: ground
Headphone Level Power 100mW into 50 Ohms

MIDI Input/Output
Connector: 2x2.5mm TS Jack
Other Input/Output
DC barrel: 1x DC barrel. For power and device charging.
Device Connector: mini-DIN

Common
Conversion: 24-bit A/D, 24-bit D/A
Sampling Rate: 44.1 kHz, 48 kHz, 88.2 kHz and 96 kHz

Power:
- USB bus powered when used with a computer
- Battery powered (2xAA included) when used with an iOS device
- DC power supply (not included, iRig PSU 3A sold separately)*

Package includes
iRig Pro I/O universal Audio-MIDI interface
Lightning to Mini-DIN connection cable with charging features (60cm/23.62")
USB-A to Mini-DIN connection cable (60cm/23.62")
USB-C to Mini-DIN connection cable (60cm/23.62")
2.5mm TRS male to MIDI female adapter (10cm / 3.9")
2 x 1.5V AA Battery
Velcro strip

Dimensions
Size: 43mm/1.69" x 127mm/5" x 37mm/1.46"
Weight: 120g/4.23oz (batteries excluded)

Notes: Deluxe version of the impressive iRig Pro Quattro features the same high-quality portable interface with the added bonus of a full complement of accessories, including mics and travel case.

Supplier's Notes:
***Note: This version of the iRig Pro Quattro I/O comes with 2 x Mic XY stereo microphones, foam windscreen, and a carry case. ***

Go pro all the way

For a little more, you get a lot with the iRig Pro Quattro I/O Deluxe edition. The value of the iRig XY stereo mic capsules alone is worth the upgrade. In addition to the pair of mics you'll get the optional power supply, which you can also use to keep your iOS device charged during extended sessions. Plus you'll get a custom carrying case to protect and transport your Quattro I/O and XY mics wherever your field work takes you.

Pro recording and performing, in the palm of your hand

iRig Pro Quattro I/O is a professional-quality 4 in / 2 out portable audio and MIDI interface packed with everything needed for field recording and content creation, for serious sound and flexibility - anywhere.

Small enough to fit in the palm of your hand, the iRig Pro Quattro I/O still packs in four high-quality, low-noise mic preamps; instrument, RCA and TRS inputs; plus XLR balanced, 3.5mm stereo and headphone outputs - and full MIDI I/O!

iRig Pro Quattro I/O works right out of the box with iPhone, iPad, Android, Mac and PC, but can also serve as a stand-alone mic preamp or line mixer, with a built-in limiter and direct monitoring so you're always guaranteed the perfect take.

Packed with a swiss-army-knife's worth of tools, iRig Pro Quattro I/O ensures you're ready for anything, anywhere.

As a mobile interface

Connected to a computer or mobile device, the iRig Pro Quattro I/O will work as a high-quality, multi-channel audio and MIDI interface with a full array of inputs and outputs so you'll always be prepared for any recording or need. Fully MFi-certified, no adaptors are required for iPhone or iPad for reliable field performance on any device.

As a broadcast / podcast interface

Enable STEREO mode and iRig Pro Quattro I/O mixes all sources down to stereo for streaming or recording. Monitoring is easy thanks to a dedicated headphone output with independent volume control and direct monitoring. Or use MONO mode for streaming to social media; Loopback lets you duet your favourite videos easily.

As a field recording interface

With an onboard microphone and optional stereo mic capsules, iRig Pro Quattro I/O turns your iPhone, iPad, Android device into a full-featured, professional field recorder.

As a stand-alone mixer

iRig Pro Quattro I/O also works as a preamp and mixer: just power it via battery, USB or DC IN and use the full set of inputs/outputs to capture and mix multiple sources to your DSLR camera with professional quality.

Always perfect recordings with the safety backup channels

In STEREO and MONO mode, inputs 3 and 4 can be used as safety channels: recording the same signal as input 1 and 2 but reduced by 12dB as a backup in case the sound source unexpectedly overloads the main channels.

Audio quality without compromise... wherever you are

Up to 24-bit, 96 kHz sample rate Ultra-low-noise mic preamps with full +48v phantom power Professional-quality, transparent A/D and D/A conversion Built-in limiter, for input 1-2, to protect against clipping Multitrack, stereo or mono internal mixdown.

Dimensions

Size: 160mm/6.29" x 90mm/3.54" x 40mm/1.57"
Weight: 340g/11.99oz (without batteries)
Cable length: 60cm/23.62"

Box contents

iRig Pro Quattro I/O
1/4" thread adapter
4x AA Batteries (alkaline)
iOS Lightning to mini-DIN cable
USB-A to mini-DIN cable
2.5mm jack to MIDI female adapter
2 iRig MIC XY stereo microphones
Windscreen
9V PSU
Travel case