搜索结果

Notes: With Melee, Walrus Audio have given you the two most quintessential effects that yield unruly amounts of power and influence to an instrumentalist: reverb and distortion. They have been harnessed and woven together for an eternity of ethereal power with The Melee: Wall of Noise. The Melee unapologetically uses a joystick to meld reverb and distortion into one massive blaze of sound. With the flip of the order switch, run the distortion into the reverb or reverb into distortion; signal chain is your call now. For the explorer, the Melee can run one of three different reverb programs Ambient, Octave, and Reverse.

In a less-is-more approach, Walrus have intentionally decided on controls that are fun to use and will inspire a wealth of creative output. Use the joystick to control the amount of distortion by moving it up and down. Moving the joystick left and right will adjust your reverb mix. The tone and decay toggles have low, medium, and high settings. Modulation can be added to the wet signal by holding down the bypass switch and moving the decay toggle. The left position is no modulation, the middle is a slight modulation, and the right is a high modulation.

Algorithms

The Melee is equipped with three different reverb programs, which can be changed by simultaneously pressing the bypass and sustain stomp switches. Experiment with the order toggle switch to hear how differently these all react in front and after the distortion!

Ambient Reverb (Pink LED) - Huge reverb capable of massive trails and engulfing your chords into an angry wash of sound. Great for soaring melodic lines or shoegaze-driven chord progressions.
Octave Down Reverb (Yellow LED) - Similar to the Dark mode in the Slo, you'll find an eerie lower octave hovering in the reverb trail for a nice and dark atmospheric touch.
Reverse Reverb with Feedback (Blue LED) - Add reversed reverb trails back into your signal, create gentle melodies or push into reverse feedback overload. Big, slow, and sad chords love to hang out there.

Momentary

Press and hold the sustain switch to ramp up the reverb trails. Release and the trails will ramp back down to where the decay switch is currently set. The sustain switch can also latch in all three programs. Press and release the Sustain switch to capture and sustain the current reverb decay for long pad-like sounds in your wet mix. Press again to release the latch, and the reverb trail will taper off based on the position of the decay knob.

Specs
The Melee comes coated in a glossy neon pink enclosure with white, yellow, and green inks with art by David Huttner.
The die-cast enclosure's exact size is 3.62" x 4.79" x 3.14" (including joystick height).
Three bypass modes: DSP, DSP+True, True Bypass
Power requirements are 9VDC, centre negative (200mA minimum).
The use of an isolated power supply is recommended for powering all Walrus Audio Pedals.
Daisy chain power supplies are not recommended.
Power supply not included.

High-Gain Distortion and Reverb combo
Controls: Vol, Tone, Decay, D>R|R>D (determines order of effects), Joystick (distortion level + reverb mix), bypass, sustain switch
Joystick control to meld reverb and distortion and inspire a wealth of creative output
Joystick controls reverb mix (x-axis) and distortion level (y-axis)
Switch signal-chain-order of distortion- and reverb-effect
D>R (distortion into reverb) or R>D (reverb into distortion)
D>R mode: traditional set up. Notes and chords remain their clarity
R>D mode: notes and chords are muddied to create a wall of sound
3 different reverb programs: Ambient, Octave and Reverse
Ambient Reverb: Huge reverb with massive trails
Octave Reverb: Lower octave on reverb trail. Like "Dark" mode on Walrus Audio Slo.
Reverse Reverb with Feedback: Add reversed reverb trails or push into reverse feedback overload.
Tone 3-way-toggle-switch sets the tone of reverb and distortion: normal, dark, bright
Decay 3-way-toggle-switch sets time of the reverb: minimum, medium, maximum
Set modulation via secondary control (decay 3-way-switch): none, slight (33RPM), high (45RPM)
Use momentary bypass to create a moment of texture
Sustain switch ramps up reverb trail to maximum or latches current reverb decay
3 bypass modes: DSP bypass, DSP+ true bypass, true bypass
9-volt DC, Centre Negative, 200mA minimum
Power Supply not included
Designed and assembled in the USA

Notes: ***B-STOCK: Item refurbished, repaired and in perfect working order.***


Intended as an all-rounder for all production purposes, the HD 490 Pro are built for comfort as well as top-notch sound quality thanks to their open-back design. DearVR MIX-SE software allows you to mix, monitor and master with accuracy.

Supplier's Notes:
The perfect mix of clarity, comfort, and reliability, HD 490 PRO studio headphones are built to handle all the complexities of today's music production. The open-back design delivers an extremely wide, dimensional sound stage and ultra-precise sound reproduction, eliminating audio blind spots and ensuring you're in full control of every detail.

Handcrafted and German-engineered with built-to-last components and a lightweight, comfortable design, HD 490 PRO lets you feel the music and forget about the headphones. Meticulously engineered ergonomics eliminate pressure points while the open-back design provides natural ventilation, making hours in the music feel like minutes. Two sets of switchable ear pads, each with a unique sound signature for long hours of mixing and producing, eliminate ear fatigue and are designed with sustainability and durability in mind - they're both washable and replaceable. HD 490 PRO mixing headphones also include the innovative DearVR MIX-SE plugin from Dear Reality, placing you in the "sweet spot" and turning your DAW into an ultimate virtual mixing environment. DearVR MIX-SE simulates the carefully designed acoustics of mixing studios, helping you ensure a balanced, consistent translation of your mix on different systems. HD 490 PRO helps you achieve your full creative vision, eliminating audio blind spots, putting you in full control of every detail, and ensuring accurate playback beyond the studio.

Features

Backed by decades of Sennheiser engineering, technology, research and development
Open-back design with an extremely wide, dimensional sound stage and ultra-precise localization
Uncolored frequency response for honest, dynamic sound reproduction across the full spectrum
Innovative low-frequency cylinder system for full, accurate, and clearly defined low end
Precision-engineered ergonomics eliminate pressure points and deliver supreme, flexible, lightweight comfort
Sennheiser Open-frame Architecture reduces total harmonic distortion (THD) and minimizes resonance,improving audio accuracy
Includes Dear Reality dearVR MIX-SE plugin, turning your DAW into an ultimate virtual mixing environment via advanced spatial audio technology
Two unique sets of ear pads for producing or mixing help eliminate ear fatigue and pinpoint frequencies


Sustainability-inspired with washable, replaceable pads and FSC-certified, forest-friendly packaging
Geometrically angled earcup design optimizes transducer placement for a consistent listening experience
State-of-the-art neodymium magnets for superior driver performance and efficiency
Patented cable coil structure blocks cable-borne noise, ensuring the clearest signal
Ultralight voice coil for remarkably authentic and dynamic audio reproduction
Right and left ear jacks with detachable cable easily adapts to any studio configuration
Patented accessibility features: braille-guided L/R earcups and grooved ear pads for eyeglasses
Open-mesh metal earpiece covers provide natural ventilation
Durable design meticulously engineered in Germany and hand-assembled in Romania

Specs

Weight (g): 260 gr. (w/o cable)
Max. Sound Pressure Level: l128 dBSPL (1 kHz @ 5% THD)
Sensitivity: 105 dBSPL (1 kHz/ 1 Vrms), 96 dBSPL (1 kHz/ 1 mW)
Transducer principle: Dynamic, open
Wearing Style: Circumaural

Total harmonic distortion: <0.2% (1kHz, 100dB SPL)
Connector: 3.5mm/6.3mm

Ambient Conditions

Operating Relative Humidity: 10 to 80%, not condensing
Operating Temperature: +0-CC

Electrical Properties:

Sensitivity: 105dBSPL (1kHz/1Vrms), 96 dBSPL (1kHz/1mW)
Impedance: 130 ohms (1kHz)

Dimensions

Weight (g): 260g (w/o cable)
Cable length: 1.8m

Notes: A unique hardware synth, Aodyo's Anyma Phi uses physical modelling mixed with virtual analogue oscillators and filters, creating a versatile setup for sounds from resonant acoustic timbres to experimental hybrid sounds.

Supplier's Notes:
Explore and create your own sounds

Discover Anyma Phi, the essential physical modelling synthesizer. Your portal to creating new sound universes inspired from the real world, where objects collide, vibrate, and resonate.

The best of both worlds

Anyma Phi blends the classic ingredients of electronic music, like oscillators and filters, with physical modelling technology, allowing it to simulate acoustic sound sources, such as strings or reeds, as well as resonating structures, like wood, glass, or metal.

Create Unique Sounds; sound design for all

The matrix provides a quick and easy way to explore your sounds by following a physical metaphor, with four macros for each of the five stages of sound generation: Excite, Vibrate, Resonate, Global, and Animate.

Infinite Possibilities; a semi-modular powerhouse

Beyond the matrix lies an insanely powerful semi-modular synthesis engine where you can harness a wide variety of oscillators and effects, and control them effortlessly using an impressive modulator system. Going so deep into sound design has never been easier before with such a small box!

Anyma Phi Editor; standalone, but well-connected?

The Anyma Phi can hold up to 200 patches, and everything you need to create them is right on the machine. You can also benefit from the large screen of your computer (PC or Mac) to edit, manage and share patches even more easily, in a streamlined environment that displays all the synth modules at once and their interactions in real time. Learn more about the Anyma Phi's Updates and Downloads.

MIDI Controller; In tune with its environment

With its small form factor, it can sit on your keyboard, or anywhere on your desk. You can control it using any MIDI controller, keyboard or sequencer, with first-class support for wind controllers, like Sylphyo. And it also shines with World and microtonal music*!

Just Tap and Scratch; the world is your oyster

With its stereo input, you can also use the Anyma Phi as a versatile effects processor for your other gear, or use any external sound to excite its resonators and other physical models. And you don't even need a mic to get interesting sounds: just tap and scratch directly on the case of the Anyma!

Technical specifications:

Hybrid monophonic synthesizer, with physical modelling components
Memory: 200 patches
Stereo audio outputs:
L-R 1/4" mono line jack outputs
1/4" stereo headphone jack output
Stereo audio inputs:
1/4" stereo jack audio input
Internal piezoelectric mic when external input unplugged
MIDI inputs and outputs via USB and DIN ports
Powerful digital semi-modular synthesizer engine:
3 oscillator slots (more than 40 types, including wind/string physical models, modal resonators, virtual analogue and digital algorithms)
5 effect slots (more than 30 types, including resonators, granular processors, and FM operators) along 2 serial buses (Main, Aux) + 1 mono reverb
16 modulator slots (more than 40 types, including envelope generators, LFO, curves, interpolators, slew limiters, sequencers, physical and algorithmic processes, etc.)
32 mapping slots (virtual patch cords), each allowing to control any synth parameter (including another mapping) using a modulator or a controller input, with sidechain input and min/max/curve/smoothing
Responsive to pitch, pitch-bend, velocity, breath control/expression, as well as 4 other controller inputs (with MIDI learn)
External MIDI CC control for the matrix and the entire patch (via NRPN)
World-class microtonal support: up to 8 custom tunings, 50 onboard presets, onboard editor, MTS import/export
Built-in arpeggiator: 15 patterns, internal/external MIDI clock sync, custom triggers
Support for up to 3-note paraphony when building a patch
External audio processors
Automatic random patch generation (optional)
Free software editor/librarian (Mac/PC)
225 x 120 x 70 mm (8.9 x 4.7 x 2.8") and 900 gr (2 lbs)
Included: Anyma Phi, 5V PSU and USB cable
Designed and made in France

Notes: ***B-STOCK: Box opened, product in perfect working order***


Keyboard version of IK's three-oscillator, dual-filter analogue synth. Classy purist analogue tones with some nice modern features like a step sequencer and effects. Also available in a cheaper, capacitive keyboard version.

Supplier's Notes:
Next generation analog for everyone

UNO Synth Pro gives you the power to create nearly any analog synth sound you can imagine. With its unique dual-filter, 3-oscillator paraphonic design, 256 presets, 64-step sequencer, studio-grade effects, expanded connections and much more, UNO Synth Pro breaks new ground for music makers.

Available in two form factors to suit all players' needs- stage-ready with metal housing and premium keybed; or ultra-portable, USB-powered with capacitive keyboard- UNO Synth Pro offers everyone the next generation of analog sound design in a smart format that fits any space or budget.

3 analog oscillators offer continuously variable waveshape, including pulse-width modulation. Oscillators can be hard-synced for more harmonically-complex tones, and oscillator FM (frequency modulation) lets you shape everything from bell-like sounds to screaming industrial tones. UNO Synth Pro even includes ring modulation for wobbly, sci-fi sound, and a white noise generator for a wide range of percussive sounds and epic rises.

Recreate famous synth sound sources or forge entirely new ones - UNO Synth Pro has the tools you need.

In addition to the original UNO Synth's 2-pole OTA multimode filter, UNO Synth Pro adds a new 2/4-pole SSI LP filter with self-oscillation. The dual filters can be used in series or parallel, with invertible phase, for a total of 24 possible filter combinations.

In short, the UNO Synth Pro can recreate the filter sound of the most famous classic synths as well as deliver fresh new options to the limits of your imagination.

UNO Synth Pro offers 2 full ADSR envelopes, one dedicated to the filter and the other to amplitude, with both available as sources to modulate everything from oscillator pitch and waveshape to LFO speed or even other envelope stages.

2 LFOs (low-frequency oscillators) can create classic synth vibrato, wah and tremolo as well as do more complex modulations including audio range FM.

And a 16-slot modulation matrix makes routing all these a breeze. You can quickly and easily design even the most sophisticated modulation scheme, with both internal and external sources, including MIDI controllers.

IK's experience in modeling analog studio effects is decades long. For UNO Synth Pro, you'll find a super warm and organic true-analog overdrive, plus 12 studio-quality effects in three simultaneous slots: modulation, delay and reverb. External signals can also be routed through these effects, with pre-effects filtering for maximum flexibility.

UNO Synth Pro provides an enhanced version of the original's long-lasting capacitance-sensing keys along with pitch and mod strips for enhanced expression. And it adds firm-touch rubber pads for the control sections, plus LED-backlit indicators and an LED display for key information, making it easier than ever to use UNO Synth Pro live on stage or in deep programming sessions in the studio.

UNO Synth Pro offers 256 user-editable presets, each capturing the full state of the sound engine from oscillators to effects.

An onboard 64-step sequencer offers both step and real-time recording, with automation for up to 40 parameters, letting you create incredibly intricate and evolving soundscapes. You can even write CV and gate automation.

And a 10-mode arpeggiator makes it easy to create intricate patterns and runs plus a new "chord mode" that takes advantage of UNO Synth Pro's paraphonic design.

UNO Synth Pro offers two noiseless, balanced stereo outputs as well as headphone out, for superior audio quality in any situation.

USB and 5-pin DIN MIDI In and Out make it easy to integrate with other synths, Mac/PC and mobile devices, and its assignable CV/Gate connections lets UNO Synth Pro interact effortlessly with your Eurorack or other modular system.

And now, audio input allows access to the filter and FX section for external signals, in addition to the original thru-put for daisy-chaining multiple units together without using a mixer.

Free Editor

Free UNO Synth Pro Editor for Mac/PC and iPad now available for all purchasers to download. This gives you access to all the advanced features 'under the hood' to manage presets and to easily create your own directly from your computer. Full details on the editor here: https://www.ikmultimedia.com/products/unosynthpro/?p=editor

Software Promo
All purchasers of UNO Synth Pro can now claim 2 free software downloads from IK's SE or CE product range: AmpliTube 5, SampleTank

Dimensions:
Size (W x D x H): 55 x 30 x 7 cm, 21.65 x 11.8 x 2.75 in.
Enclosure: Metal/plastic
Weight: 5.8 kg, 12.8 lb
Power: Power PSU

Package includes:
UNO Synth Pro
1x Micro USB to USB Cable
Power Supply Unit

Notes: ***B-STOCK: Item refurbished, repaired and in perfect working order.***


Collabing with YouTube sensation Andrew Huang, Endorphin.es offer up this impressive multipurpose processor module. Building blocks of stereo filtering, compression, reverb and more offer huge creative potential.

Supplier's Notes:
In collaboration with Andrew Huang, based on his modern music production techniques, Endorphin.es developed a creative audio processor with multiple blocks that can be moved around in order to achieve different flavours for sound design.

Processing unit without fixed structure: intuitively create astonishing and ephemeral timbres, from atmospheric rumbles to heavy or distorted textures.
Creative stereo effect processor with delay, reverb, filter and distortion with quickly explorable routing chain with single button press.
New generation ARM Cortex - M7 processor with 96 kHz 32 bit internal processing.
Lush hall and whooshing reverse reverbs with audio freeze and pre-delay.
Sidechain audio ducking envelope available both internally and externally with additional one knob single band compressor.
Tap delay with maximum delay time up to 2.5 seconds, external clock input with onboard clock divider and 1v/oct time control.
8x oversampled distortion algorithm.
Pre- and post - VCA, tone and volume controls with extra gain.

Power consumption
135 mA +12V
35 mA -12V
0 mA 5V

Dimensions
16 HP
26 mm deep with power ribbon cable connected.

Notes: ***B-STOCK: Item refurbished, repaired and in perfect working order.***


Up to eight voices of digitally synthesised drums, percussion and synth sounds from this versatile module, featuring virtual analogue models as well as FM and wavetable options.

Supplier's Notes:
Flame "Fire" percussion synth module

The module is a full 8-way polyphonic drum and percussion synthesizer. It offers different digital synthesis algorithms, which can be distributed over 8 channels. The sound engine delivers virtual analog sounds as well as different digital percussion sounds, which are generated with FM, wavetable or virtual analog synthesis. It is also possible to create sim- ple monophonic bass or synthesizer voices.

During development, particular attention was paid to direct and simple usability with regard to live operation. The hardware essentially consists of two parts (which are deli- vered together). On the one hand there is the basic module with all controls, the display, connections for MIDI, 2x CV inputs and 5 audio outputs.

There is also a separate XFIRE I/O extension with sockets for the 16 analog trigger/gate/CV inputs and 3 additional audio outputs. Both modules are connected via a 60cm long ribbon cable. In this way, the XFIRE module can be installed anywhere else in the rack. The base module is therefore only 22TE wide and can also work alone without the extension as a MIDI expander.

A maximum of 8 audio outputs are available. A stereo pair (outputs 7+8), plus 6 additio- nal individual direct outputs. All outputs are freely configurable. Two pages with settings for panorama and volume are available for the stereo main out.

There is a gate/trigger input and a configurable CV input for each channel. Two additio- nal programmable CV inputs can be used for further controls. Regardless of the analog connection, the module offers full MIDI functionality. Two MIDI inputs and a MIDI output/softthru allow integration into an external MIDI setup. The firmware can be upda- ted via MIDI Sysex. The created KIT data can also be saved or exchanged.

Notes: ***B-STOCK: Box damaged, missing documentation, product in perfect working order***


Keyboard version of IK's three-oscillator, dual-filter analogue synth. Classy purist analogue tones with some nice modern features like a step sequencer and effects. Also available in a cheaper, capacitive keyboard version.

Supplier's Notes:
Next generation analog for everyone

UNO Synth Pro gives you the power to create nearly any analog synth sound you can imagine. With its unique dual-filter, 3-oscillator paraphonic design, 256 presets, 64-step sequencer, studio-grade effects, expanded connections and much more, UNO Synth Pro breaks new ground for music makers.

Available in two form factors to suit all players' needs- stage-ready with metal housing and premium keybed; or ultra-portable, USB-powered with capacitive keyboard- UNO Synth Pro offers everyone the next generation of analog sound design in a smart format that fits any space or budget.

3 analog oscillators offer continuously variable waveshape, including pulse-width modulation. Oscillators can be hard-synced for more harmonically-complex tones, and oscillator FM (frequency modulation) lets you shape everything from bell-like sounds to screaming industrial tones. UNO Synth Pro even includes ring modulation for wobbly, sci-fi sound, and a white noise generator for a wide range of percussive sounds and epic rises.

Recreate famous synth sound sources or forge entirely new ones - UNO Synth Pro has the tools you need.

In addition to the original UNO Synth's 2-pole OTA multimode filter, UNO Synth Pro adds a new 2/4-pole SSI LP filter with self-oscillation. The dual filters can be used in series or parallel, with invertible phase, for a total of 24 possible filter combinations.

In short, the UNO Synth Pro can recreate the filter sound of the most famous classic synths as well as deliver fresh new options to the limits of your imagination.

UNO Synth Pro offers 2 full ADSR envelopes, one dedicated to the filter and the other to amplitude, with both available as sources to modulate everything from oscillator pitch and waveshape to LFO speed or even other envelope stages.

2 LFOs (low-frequency oscillators) can create classic synth vibrato, wah and tremolo as well as do more complex modulations including audio range FM.

And a 16-slot modulation matrix makes routing all these a breeze. You can quickly and easily design even the most sophisticated modulation scheme, with both internal and external sources, including MIDI controllers.

IK's experience in modeling analog studio effects is decades long. For UNO Synth Pro, you'll find a super warm and organic true-analog overdrive, plus 12 studio-quality effects in three simultaneous slots: modulation, delay and reverb. External signals can also be routed through these effects, with pre-effects filtering for maximum flexibility.

UNO Synth Pro provides an enhanced version of the original's long-lasting capacitance-sensing keys along with pitch and mod strips for enhanced expression. And it adds firm-touch rubber pads for the control sections, plus LED-backlit indicators and an LED display for key information, making it easier than ever to use UNO Synth Pro live on stage or in deep programming sessions in the studio.

UNO Synth Pro offers 256 user-editable presets, each capturing the full state of the sound engine from oscillators to effects.

An onboard 64-step sequencer offers both step and real-time recording, with automation for up to 40 parameters, letting you create incredibly intricate and evolving soundscapes. You can even write CV and gate automation.

And a 10-mode arpeggiator makes it easy to create intricate patterns and runs plus a new "chord mode" that takes advantage of UNO Synth Pro's paraphonic design.

UNO Synth Pro offers two noiseless, balanced stereo outputs as well as headphone out, for superior audio quality in any situation.

USB and 5-pin DIN MIDI In and Out make it easy to integrate with other synths, Mac/PC and mobile devices, and its assignable CV/Gate connections lets UNO Synth Pro interact effortlessly with your Eurorack or other modular system.

And now, audio input allows access to the filter and FX section for external signals, in addition to the original thru-put for daisy-chaining multiple units together without using a mixer.

Free Editor

Free UNO Synth Pro Editor for Mac/PC and iPad now available for all purchasers to download. This gives you access to all the advanced features 'under the hood' to manage presets and to easily create your own directly from your computer. Full details on the editor here: https://www.ikmultimedia.com/products/unosynthpro/?p=editor

Software Promo
All purchasers of UNO Synth Pro can now claim 2 free software downloads from IK's SE or CE product range: AmpliTube 5, SampleTank

Dimensions:
Size (W x D x H): 55 x 30 x 7 cm, 21.65 x 11.8 x 2.75 in.
Enclosure: Metal/plastic
Weight: 5.8 kg, 12.8 lb
Power: Power PSU

Package includes:
UNO Synth Pro
1x Micro USB to USB Cable
Power Supply Unit

Notes: ***B-STOCK: Box opened, product in perfect working order***


The Pro VLA II is a tube driven Vactrol-based compressor/leveling amplifier designed to excel in any professional audio environment. Superior performance and an incredible tone makes the Pro VLA II and indispensable tool for tracking, mixing, mastering, dynamic control of live sound sources or for use in broadcast audio.

Capable of delivering a far more musical natural sounding and sonically transparent compression than competitive units in its class, the Pro VLA II uses an Opto-electronic circuit rather than the more typical design VCA driven level detection circuit. This VCA-less design coupled with a 12AT7 vacuum tube in the gain stage makes the Pro-VLA II the ideal dynamic control device for critical audio applications.

Exceptional signal integrity with extremely low noise and low distortion is achieved in the Pro VLA II by utilizing a transformerless design throughout.

Unlike typical compression units that use Voltage Controlled Amplifiers (VCA's) to handle level detection, the Pro VLA II's Opto-electronic design allows a far more transparent and musical sounding compression without sounding aggressive or un-natural. This Vactrol based optical electronic circuitry is the basic component of the classic highly sought after compressors of past.

The Vactrol design allows the Pro VLA II to react to audio signal in much the same way the eye naturally adjusts to fluctuations in light levels, smoothly, quietly and almost imperceptibly.

The Pro VLA II is a soft knee leveling amplifier by design. Although capable of providing dramatic compression effects, the Pro VLA II was designed to excel in any application where transparent, expressively musical dynamics control is desired.

Large highly visible backlit analog VU meters accurately display input and output levels while extremely fast 10-segment LED's display gain reduction. For added functionality, the LED's display either average level for mastering & mixing applications or peak hold for monitoring individual sources when tracking audio.

XLR and 1/4" TRS balanced inputs and outputs are provided to ensure the Pro VLA II can connect with any audio source or hardware. A +4 dBu/-10 dBu mode switch optimizes the Pro VLA II I/O for either consumer or professional equipment.

Notes: ***B-STOCK: Box opened, product in perfect working order***


Two decades in the game and the mighty MicroKorg remains a classic. Crystal version celebrates the anniversary with a fresh new look and the same punchy sound.

Supplier's Notes:
A shining homage to two decades of microKORG legacy

The microKORG was originally released in 2002 and has remained strong for two decades. Countless tracks and artists have made use of the amazing possibilities it offers and it continues to be one of the most popular choices for musicians on stage and in the studio.

The instruments that musicians recognise as "classics" are those that are loved and always in use, regardless of times and trends. The word "classic" symbolises musical instruments that are revolutionary in their field. There may be imitations of a classic, but the distinct character of the original shines more brilliantly and is only enhanced by time.

Two decades ago, the portable, battery powered microKORG was born with a radical new micro-keybed, a powerful Vocoder and ready-to-use sounds ideal for contemporary genres delivering countless hit performances, and instantly revolutionising the way musicians played. This compact sound monster introduced synthesis to a vast number of non-keyboard playing musicians and created a way of making music we now take for granted: a small keyboard resting unassumingly atop a larger one onstage, made for use by hobbyists and pros alike and finding itself front and centre of studios worldwide from the smallest bedroom to the largest pro recording facility.

To celebrate the 20th anniversary of its release, the special edition microKORG Crystal offers a unique and stunningly stylish take on this beloved synth - now a classic in its own right.

The microKORG was originally released in 2002 and has remained strong for two decades. Countless tracks and artists have made use of the amazing possibilities it offers and it continues to be one of the most popular choices for musicians on stage and in the studio. microKORG Crystal is the ultimate reincarnation of this iconic synth.

"Skeleton" type semi-translucent chassis, with matching knobs and controls

Previously unchanged, the microKORG Crystal features a new take on the structure of the microKORG, with a semi-translucent chassis that lets you see the electronics and internals. Even the controllers are semi-transparent, including the knobs, dials and wheels. As a commemorative model, the microKORG Crystal is great fun to look at from any angle, and as its name suggests, it "crystalizes" the energy and feelings of the KORG team behind its birth.

A panel with a beautiful sheen

The microKORG Crystal features a stainless mirror-finish front panel that blends perfectly with the semi-translucent knobs and dials, blurring the limits between you and your instrument and providing a cosmetic impact never seen in any other musical instrument.

Aluminium side panels for a sturdy feel

The original microKORG featured wooden side panels that suggested a retro feel, serving as an elegant accent to the analogue modelled synth engine. This new special microKORG features sleek aluminium side panels for a clean and depurated look.

Dedicated transparent carry bag

The microKORG Crystal features a stainless mirror-finish front panel that blends perfectly with the semi-translucent knobs and dials, blurring the limits between you and your instrument and providing a cosmetic impact never seen in any other musical instrument.

Specifications

Sound generation:
Analogue Modelling Synthesis System

Synthesizer program:
Multi Timbral: 2 (max, Split/Dual Mode)

Voices: 4 voices

Sound source:
2 Oscillator + Noise Generator
Multi Mode Filter (-24dB/octLPF,-12dB/oct LPF/BPF/HPF)
EG×2
LFO×2
Virtual Patch×4

Voices: 4 voices

Vocoder program

Voices: 4 voices

Sound source:
1 Oscillator +Noise Generator
EG×1
LFO×2 8
Channels vocoder
Level and pan of each channel can be edited
Formant Shift function

Programs: 128
Effects: Modulation effects (3 types), Delay (3 types), Equalizer
Arpeggiator: 6 types

Controllers
Real-Time control knob X 4 (3 level Selection),
Arpeggio ON/OFF

Keyboard: 37 Keys (mini-keyboard, keyboard has velocity)
Inputs: AUDIO IN 1,2, Level switch LINE/MIC, [AUDIO IN 1, 2 (LINE) ], [AUDIO IN 2 (MIC)]
Outputs: L/MONO, R, Headphones
MIDI : IN, OUT, THRU
Display : 3 characters×1 line with 8 segment LED
Power supply: DC 9V (AC adapter)
Power: 6.4w Max
Dimensions: 524 x 232 x 70mm
Weight: 2.4 kg (instrument only, without batteries or microphone)
Included items: AC adapter, condenser microphone, dedicated transparent carry bag

Notes: All the modulation effects you could dream of in a compact pedal. Chorus, Phaser, Tremolo, Vibe, Rotary and Filter programs give you plenty of sonic options with nice tweakability and superb sound quality.

Supplier's Notes:
The M1 is a powerful multi-function modulation machine with six customized, studio-quality programs: Chorus, Phaser, Tremolo, Vibe, Rotary, and Filter. Each program has a wealth of options to tune, tweak, customize and then save to one of nine onboard presets. A sound explorers delight, the M1 features a dedicated lo-fi knob allowing you to mix various lo-fi parameters to every program. Add subtle movement and texture to float under your playing or make a massive statement with a thick swirling chorus to choppy panning tremolo. Write your sonic story in any style and genre with the M1 High-Fidelity Modulation Machine.

Programs

Chorus - Find subtle chorus to be vibrant and lush tri-chorus that will instantly teleport you to the 80s. Type I is a traditional chorus great for tight smooth chorus tones. Type II adds a second chorus with an offset rate and depth. Thanks to the constructive interface, it has a more dramatic character caused by essentially running two chorus pedals in series. Type III finds its roots in the classic tri-chorus effect running three chorus units in parallel for a lush multi-dimensional chorus.
X knob controls Lag to set the maximum allowed amount of pitch detuning.

Phaser -Classic 70s phaser sounds we all know and love, with added features that you wouldn't expect. Similar to the Lillian, Type I is a 2-Stage Phaser that produces a single notch to the classic mild phaser. Type II is a 4-Stage model producing 2 notches for a stronger effect. Type III is a phaser modeled after the unique tuning and LFO shape found in a Uni-Vibe.

X knob introduces Feedback for a more dramatic phaser effect.

Tremolo - This program emulates a tremolo with three algorithms containing all the bells, whistles, and even a cherry on top. Type I is excellent for traditional sounds similar to optical and bias tremolos that raise and lower the entire frequency range - similar to the Monument in standard mode. Type II is a warm and cozy harmonic tremolo - similar to the Monument in harmonic mode. This unique sound is formed by raising and lowering your high and low frequencies opposite each other. Type III offers several predefined patterns for rhythmic sequenced pulsing tremolo. X knob manipulates the phase of the left and right volume modulation for a wide stereo panning effect. Shape and Symmetry in Type III (pattern Trem) select the pattern group and patterns within each group.

Vibrato - Make good parts great with detuned, warbly, and vintage sounds that harken back to the 60s. Type I focuses on traditional vibrato sounds like those found in Julia and Julianna's "V" mode. Old record players inspire type II with classic RPM's on the rate knob and some noise character you'd find in your dad's old dusty Speedwagon LPs. The rate knob can select 33rpm, 45rpm, and 78rpm speeds in this mode. Type III is our take on the wow and flutter pitch characters found in old tape players. Warm and charming with a hint of nostalgia. X knob manipulates the phase of the pitch modulation when connected with stereo outs in Type I and Type II and controls the amount of "flutter" modulation applied in Type III.

Rotary - Because you can't fit a Leslie speaker on your pedalboard, type I aims for that traditional watery sound of a well-oiled Leslie speaker. Type II only spins the horn but still plays the sound out of the drum. Type III only spins the drum but still plays sound from the horn. X knob controls the drive of the horn.

Filter - Add tone-shaping movement to your signal with different modulated filters. Type I is a lowpass filter good for modulated darker tones. Type II is a highpass filter used to creatively modulate your low frequencies. Type III is a bandpass filter forming a sliding "window" of frequencies. Drive the filter frequency with the main LFO or do things like set the depth to zero and turn up the LO-FI envelope control to drive the filter frequency with your playing dynamics.

X knob controls filter resonance, bringing a more aggressive sound to the selected filter.

Tone controls the filter's center frequency or starting frequency where the modulation is applied.

Specs:

The M1 comes in a dark blue finish with red, orange, cream, gold, green, purple and blue ink.
The enclosure's exact size with knobs is 4.9" x 2.52" x 2.64". Power requirements are 9VDC (300mA minimum).
The use of an isolated power supply is recommended for powering all Walrus Audio Pedals. Daisy chain power supplies are not recommended. Power supply not included.
USB firmware updates can be done via www.walrusaudio.io

Notes: Evolved version of Maneco's drone synth uses an oscillator based on equations, a Korg MS20-inspired filter and built-in reverb. Check out the Grone Expander for added touch-sensitive controls.

Supplier's Notes:
Dark Drone Machine

Generates sound based on equations converted to analog signals, there are sixteen equations selected by Up and Down switches. Four LEDs indicate equation number in binary mode. Three Pots modify numbers used by the equation, A0, A1 and A2, fourth pot Sample Rate controls pitch and speed of the oscillation. There's an Output Level pot for the oscillator and a dedicated jack for patching the Oscillator sound to external modules.

NOISEGENERATOR:

White noise with noise level pot and noise output jack.

VCF:

MS20 resonant low pass filter, with CUT frequency pot control, RESONANCE, MODULATION1 amount pot, input and output jacks and second cv input for cutoff, labeled MOD2

LFO1:

Low frequency oscillator routed to MOD1 from VCF, RATE and WAVEFORM shape Pots.

Also routed to delay block1

Waveforms are: ramp up, ramp down, square, triangle, sine, sweep, random levels, random slopes

EffectsSection:

Delay with tap tempo and reverse component: controls for delay time, delay feedback, delay level and reverse component, tap tempo input jack for external control

Reverb with freeze button, controls for reverb level and reverb decay, input jack for freeze function

Notes: Osc 1 and 3 - Bytebeat oscillators

Generates sound based on equations converted to analog signals , there are sixteen equations selected by Up and Down switches. Four LEDs indicate equation number in binary mode. Three Pots modify numbers used by the equation, A0 , A1 and A2 , fourth pot Sample Rate controls pitch and speed of the oscillation. There's an Output Level pot for the oscillator and a dedicated jack for patching the Oscillator sound to external modules .

Hold toggle switches select between fast decay, long decay and hold mode, for the touch trigger input. There are CV inputs for pitch on these two oscillators

Osc 2 and 4 -Wavetable oscillators

Digital oscillators, touch controlled or gate controlled by gate jacks, pitch is controlled by pitch pot, modulation by LFO A or LFO B and cv inputs.

A0 pot selects waveform, A1 pot morphs between two waveforms.

There are individual output jacks.

LFO 1 and 2

Low frequency oscillator routed to MOD inputs for oscillators 2 and 4, also to modulation input for delay section, selectable by toggle switch , RATE and WAVEFORM shape
pots.

Dimensions
36 HP

Current Draw
200 mA +12V

Notes: Very nice old-school vocoder for Eurorack, featuring a built-in mic pre-amp and full 10-band patch bay. Internal VCO and straightforward control setup help simplify operation.

Supplier's Notes:
The VXC-2220 is an 10-band analogue vocoder with patch-bay for each individual filter section. VXC-2220 vocoder is based on the iconic classics 222 vocoder. For stand alone usage the VXC-2220 is equipped with an internal oscillator generating saw and pulse waves form C1 to C6. A simple and efficient vocoder.

Specifications

Microphone input for speech signal
Line input for speech signal
Line input for carrier signal
Input level control for speech and carrier signal
Output level control
Line output
10-Band analyzer outputs
10-Band synthesizer input
Internal VCO (1 semi-nut step size);
* Saw wave (C1 - C6)
* 3x 10% Pulse wave (C1+C2+C3 - C4+C5+C6 )
* White noise
- Synthesis for 's' and 't' sounds
- Feed-trough level control for speech and carrier channel
- Bypass switch
- 10pin power connector (+/-12V)

Dimensions:
(36HP) 128,5×182.5mm (depth: ca. 35mm incl. power connector)

Power Consumption:
+12V = 125mA
-12V = -125mA

Notes: Part of the analogue MG-X series, the MG16X CV features 16 channels with D-PRE class A preamps, three-band semi-parametric EQ and high-quality SPX digital effects. Solid value.

Supplier's Notes:
MG-X are an addition to the MG Mixer line up. Available in 10, 12 and 16 channel versions, this variant of MG Mixer features our acclaimed SPX effects, without the USB option featured on the XU model - perfect for all scenarios where USB streaming is not needed. The quality and features of the MG mixers series is of course retained, whilst the new models are presented in a fresh black/grey finish.

Road Tough. Studio Ready.

For more than a century, Yamaha has been building a legacy of superior craftsmanship and innovation exemplified in all of their products, from an unrivalled catalog of world-class musical instruments to touring-grade professional audio. Now in its third incarnation, the MG Series embodies this pursuit of design excellence, and incorporates some of the same technologies developed for use in high-end professional consoles, including studio-quality preamps, powerful digital processing, and a rugged, reliable construction.

With an intuitive, easy-to-use interface, the MG Series boasts an extensive lineup of compact mixing consoles with models ranging from six to twenty channels, suitable for a diverse range of users and applications. For installed, recording, or live music settings, the solid construction and flexible design of these consoles lets you shape your sound with confidence, continually delivering peak performance and a level of sound quality and reliability unrivalled in its class.

As same as XU models, X models have SPX effects. Not to mention live session, but also installation cases like conference rooms, banquet halls and weddings, users can have wide range of use. Stylish grey colour models enhance your performance.

Specifications

Mixing capability

On-board processors - SPX algorithm: 24 programs, PARAMETER control:1, FOOT SW:1 (FX RTN CH on/off)
I/O
Phantom power: +48 V
Digital I/O: N/A

Input Channels

Mono[MIC/LINE]: 8
Mono/Stereo[MIC/LINE]: 2
Stereo[LINE]: 2
Output Channels
STEREO OUT: 2
MONITOR OUT: 1
PHONES: 1
AUX SEND: 4
GROUP OUT: 4
Bus - Stereo: 1, GROUP: 4, AUX: 4 (incl. FX)

Input Channel Function

PAD: 26 dB (Mono)
HPF: 80 Hz, 12 dB/oct (Mono/Stereo: MIC only)
COMP: 1-knob compressor (Gain/Threshold/Ratio) Threshold: +22 dBu to -8 dBu, Ratio: 1:1 to 4:1, Output level: 0 dB to 7 dB Attack time: approx. 25 msec, Release time: approx. 300 msec
EQ HIGH: Gain: +15 dB/-15 dB, Frequency: 10 kHz shelving
EQ MID: Gain: Gain: +15 dB/-15 dB, Frequency: Mono 250 Hz - 5 kHz peaking, Stereo 2.5 kHz peaking
EQ LOW: Gain: +15 dB/-15 dB, Frequency: 100 Hz shelving
PEAK LED: LED turns on when post EQ signal reaches 3 dB below clipping
Level Meter: 2x12 -segment LED meter [PEAK, +10, +6, +3, 0, -3, -6, -10, -15, -20, -25, -30 dB]

General

Total harmonic distortion: 03 % @ +14dBu (20 Hz to 20kHz), GAIN knob: Min, 0.005 % @ +24dBu (1kHz), GAIN knob: Min
Frequency response: +0.5 dB/-1.5 dB (20 Hz to 48 kHz) , refer to the nominal output level @ 1 kHz, GAIN knob: Min
Hum & noise level
Equivalent input noise: -128 dBu (Mono Input Channel, Rs: 150?, GAIN knob: Max)
Residual output noise: -102 dBu (STEREO OUT, STEREO master fader: Min)
Crosstalk: -78 dB
Power requirements: AC 100 - 240 V, 50 / 60 Hz
Power consumption: 22 W

Dimensions

W: 308 mm (12.1"), H: 118 mm (4.6"), D: 422 mm (16.6")
Net weight: 2 kg (9.3 lbs.)
Accessories: Included Accessory: Owner's Manual, Technical Specifications, AC power cord, Cubase AI Download Information, Optional Accessory: Rack-mount kit RK-MG12, Foot Switch FC5
Others: Operating Temperature: 0 to +40C

Notes: ALM Eurorack cases are available in a range of sizes all including an integrated powered bus boards.

The cases all feature anodised aluminium construction, an on/off switch, rubber feet, and high quality switched powered bus boards with numerous keyed headers and ample power capacity.

These are simple and compact Eurorack cases, perfect for small, focused systems, taking along on travels, or as a tabletop addition to a larger setup.

Cases are available in 4 sizes; 3U 84HP / 6U 84HP / 3U 52HP / 6U 52HP sizes. They all offer 1 Amp on both the -12V and +12V rails per row.

Great modern cases

The ALM powered Eurorack case was originally designed for the System Coupe. Wider interest has seen it evolve into a range of different sized cases being made available by themselves.

A fixed solid bus board provides quality ample power and plentiful keyed power connectors. The shielded DC/DC power converter is low noise and includes overload and short circuit protection. Fixed, quality mounting rails are used over sometimes frustrating sliding nuts. The case has a great looking all anodised aluminium construction that is both strong and light.

The case proportions are designed to look great on a table or desk (not too deep, just enough) and also be easy to fit in a bag and transport.

Decksaver case covers are available currently for the 3U/84HP, 6U/52HP, and 6U/84HP cases.

6U / 52 HP

Provides up to 1 Amp power on each -12V & +12V rails.
Connections for up to 9 modules on busboard, with additional 'flying bus board' included that adds up to 12 connectors.
Includes 2 Amp power 'brick'

Notes: Create without boundaries.

Record, produce, compose, mix, master, and perform-all from a single, intuitive application. Only Studio Oner 5 provides integrated tools that take you from initial inspiration to mastered production, from full-length album to setlist on stage. The standard for end-to-end production, Studio One is the DAW that does it all.

Drag-and-drop everything.

Studio One pioneered the often-imitated drag-and-drop workflow that continues to be a guiding principle in Presonus' design philosophy. Audioloops, virtual instruments, plug-in effects, and even presets can all be dragged into your session from Studio One's innovative Browser. Copy FX Chains from one channel to another simply by dragging-and-dropping. Convert MIDI to audio or audio to MIDI using drag-and-drop. Upload and download files to and from your PreSonus Sphere Workspaces by drag-and-drop. Ease of use is at the heart of Studio One, so your mind stays focused on your inspiration.

Perfect harmony.

The only DAW with Harmonic Editing for both audio and MIDI, Studio Oner 5 offers Chord Track, a songwriter's dream come true. Create, audition, and change chord progressions and even have older parts follow a newer, better chord structure, thanks to the inspiration Harmonic Editing can provide. With version 5.3, you can now drag chords from the Chord Track to an Instrument Track to begin composing right away. Chord notes can even be extracted directly from audio by detecting chords and then dragging the audio event to an Instrument Track.

Inspiring plug-ins.

With a complete suite of effects plug-ins, Studio Oner 5 supercharges your mixing. These plug-ins are so good we've made a few available for use in any DAW by popular demand. From State Space Modeled guitar amps to lush reverbs and polyrhythmic delays, Studio One has all the plug-ins you need to mix and produce. Studio One Professional's unique Pipeline XT plug-in lets you use boutique and vintage analogue signal processors as easily as software plug-ins. Studio One's powerful Splitter plug-in lets you run multiple plug-ins in parallel on a single channel.

Analogue mixing with digital ease.

The proprietary Mix Engine FX plug-ins provide State Space Models of classic analogue consoles that can process your mix across channels on any bus, collectively. This isn't a stereo bus plug-in, this is multi-source processing that re-creates true analogue circuit behaviour like console input-gain saturation, analogue noise, and crosstalk-all painstakingly modelled component by component from real-world hardware.

Produce without limits.

Forget laborious transposition, cutting, pasting, and moving when arranging. Audition new arrangement ideas on the fly with a simple click of your mouse. Use Scratch Pads to test arrangements. The flexible Arranger Track makes moving sections of Songs as easy as moving Parts. Powerful comping tools make assembling a perfect take simple, efficient, and fun. A robust suite of tools ranging from transient detection to multiple slicing and time-stretching features makes editing multitrack drums blazingly fast. And with groundbreaking Harmonic Editing-the most flexible implementation ever-no other program can approach the ease of arranging and songwriting that Studio One 5 delivers.

Edit audio and MIDI- fast.

Clip Gain Envelopes let you polish performances or remove glitches with adding a plug-in to your effects chain. Convert audio to MIDI and MIDI to audio with a simple drag-and-drop for blazing fast sample replacement. Replace drum sounds with samples simply by dragging the source track to an Impact XT track. The combined Arrow and Range Tools boost your audio editing efficiency by merging the most frequently used tools into one. Select, move, split, or duplicate Events; trim start and end points of Events; adjust fades; and change the overall Event level in one seamless action.

A sound as unique as you.

Inspiring virtual instruments and unique Multi Instruments let you combine instruments to create your own unique library of sounds. You'll create beats faster than ever with Impact XT, our comprehensive rhythm-production environment. Build your own sampled instrument with Sample One XT. From polyphonic analogue to monophonic subtractive synthesis, Studio One has the sounds that make you want to create. Presence XT can be expanded with Add-on packs like Deep Flight One and PreSonus Studio Grand. Aux Channels let you easily use your hardware synths, drum machines, and groove boxes as part of your productions, so dust off that TX81Z or Portastudio and put them back to work! However you create, Studio One has a tool that makes the job easy.

Notes: Excellent value from this unique dual analogue oscillator, heavily based around the concept of 3D morphing using touch-sensitive control strips. Deep modulation options and stable TZFM add up to impressively deep sound design.

Supplier's Notes:
Norand unveils Morphos, a morphing dual analogue oscillators packed with creative features.

3D Morphing

Morphos' preset strips are groups of four specially developed FSR sensors that can precisely detect vertical, horizontal and pressure information from the pressure distribution of your finger. 3D morphing allows you to create entirely new soundscapes by morphing between multiple user presets, in three different dimensions. All at the reach of your fingertips, it opens up a whole new world for live jamming!

The Synthesis

The two all-analogue, digitally controlled Oscillators provide very pure harmonics, 4 waveform types on a continuously variable potentiometer and extremely stable TZFM (Through Zero Frequency Modulation). Thanks to its digital brain, an active calibration system allows it to track over 10 octaves, even at high TZFM ratio.

Contextual Modulation

Morphos inherits Norand Mono's Contextual Modulation technology, adapted for the modular world. It is possible to modulate every parameter under CV. The module provides 3 Modulation Modes - Attenuverter, Modulator and Ping Envelope - allowing you to modulate timbre and create drum sounds.

Technical Specifications

Synth Voice Features

Fully analogue signal path 2x analogue oscillators Continuously variable waveform Thru-zero frequency modulation Hard-sync

Modulation Features
Controls: 8x dedicated ping envelopes 8x dedicated modulator
Modulator: 4 waveforms Type settings : Free/Synced/Audio-Rate Audio-Rate anti-aliased, quantized to OSC1 Free from 0.1 to 80 seconds
Envelope: Decay segment from 10us to 20s

Memory Storage: 4 banks 3 layers per bank 4 presets per layer
Outputs
Eurorack level audio outputs: Output level: 10Vpp maximum Output impedance: 1000 Ohm
CV outputs: Voltage range: -5V/+5V 1V/oct resolution : 3 cents of a semitone
Electrical Specification: +12V: 460mA -12V: 90mA +5V: 0mA

Physical Specifications
Width: 28HP
Height: 3U
Depth: 25mm

Warranty: 2-year Norand warranty

Notes: Multipurpose mixer with FX for live sound and recording.

Live or in the studio, ZED60-10FX is an ultra-portable mixer for solo artists and small bands.

Based on our top selling ZED-10FX, the new ZED60-10FX adds premium quality 60mm faders for that intuitive, tactile mixing experience.

This mixer is a guitarist's dream. Two of the 4 mono channels have high impedance jack inputs that can take a normal line level or a low level input from a guitar pickup, so guitars can be plugged straight into the mixer without the need for DI boxes. These inputs have been crafted to recreate the sound of a classic tube preamp in a combo or head amp for incredible definition and warmth. Two stereo inputs are provided for MP3/CD players or keyboards.

ZED60-10FX comes with configurable USB audio in/out, making it easy to capture a stereo recording at the gig or in the studio. The mixer is equipped with professional XLR main stereo outputs, a flexible monitoring section with headphone and speaker feed outputs, and 16 stunning FX.

Most important of all, ZED60-10FX lives up to the audio and build quality standards that have made Allen & Heath one of the most trusted names in professional audio for more than 40 years.

Getting audio to and from a computer easily is now a common requirement for live sound and music production. The way this has been implemented on ZED is super-flexible and super-easy! No longer do you need to fiddle around the back of your PC to get to the soundcard inputs, only to find that the levels are all wrong and noisy. Just plug in a USB lead to your ZED, select the USB routing on the mixer and the device on your computer and that's it! CD quality audio to and from your PC or Mac. Switches and connection through jack socket terminals provide different send/return configurations:-

SEND OPTIONS:
1) Main Mix Left + Right (Post master Level)

2) Aux + FX bus (Aux is a pre-fade send, FX is a post-fade send)

3) Record Bus Left + Right (Separate stereo bus to Main Mix)

RETURN OPTIONS:
1) To Playback input (through jack socket break contacts)

2) To Stereo 2 channel (through jack socket break contacts)

ZED60-10FX features a responsive 3-band British EQ with sweepable mid frequency that is acclaimed for its musicality, even when applying extreme creative or corrective equalisation. All EQ controls have been carefully calibrated for responsiveness and smooth, precise adjustment.

ZED60-10FX has an essential selection of 16 time-delay effects, designed for small groups who don't want to carry around an effects unit with their gear but who still want great quality FX at their gigs and on their recordings. Our DSP engineers worked hard, crafting and refining beautiful reverb algorithms to enhance every performance. These effects are available nowhere else at this price point - this quality and integration is only available from the ZED-FX. ZED effects are easily controlled using 3 buttons with 9 display LEDs. For example, the ideal delay time can be quickly tapped-in, or the perfect amount of reverb on the lead vocal can be dialled-in. There is one-stop navigation and editing - in fact, it's just as easy as using effects pedals. To alter effects parameters, the TAP button is held down and the up/down buttons pressed to adjust the specific parameter for that effect, for example, the decay length on PLATE, or the depth on CHORUS.

ZED60-10FX's pre-amps are similar in design to our MixWizard range of mixers, but with a twist! Inputs 3 & 4 have a high impedance jack input capable of taking either a normal line level or a low level input from a guitar pickup. These newly designed inputs have been crafted with the aim of replicating the sound of a classic guitar or instrument tube pre-amp in a combo or head amp. An extremely high input impedance ensures loading on pick-ups is minimal and a Class A FET (field effect transistor) circuit powered from 48V is employed to give the valve-like gain stage. There is a gain "Boost" switch associated with the guitar inputs which boosts gain by 26dB to cater for instruments with very low level outputs and the overdrive characteristics of the guitar inputs are very similar to a valve (tube) circuit, being asymmetric and soft. All this makes for a wonderfully natural sound to be reproduced from the instrument, full of warmth and character.

Notes: Clouds, the granular synthesis module from Mutable Instruments, was discontinued in 2017. Supercell brings back Clouds in a more accessible 34 hp form factor, offering an improved user interface and several additional features:

- Each of the Blend parameters (Feedback, Panning, Mix, and Space) have dedicated knobs with their own CV inputs and inverting attenuators (attenuverters).

- The inputs and outputs now have mute switches, stereo VCAs, and separate VU meters. The knobs act as offset controls when their respective VCA inputs are patched.

- A stereo output gain control has been added, providing an additional +6 dB of gain to compensate for low output levels when using certain parameter combinations.

- The complex process of changing the sampling time and managing presets has been simplified with dedicated switches and status LEDs.

- Extensive modulation options for all parameters including direct patching of external CV, distribution of one CV to all parameters via the AUX input, or an internal smooth random CV that is normalized to any unpatched inputs when AUX is also unpatched. The attenuverters control the modulation depth in all three cases. As of firmware v1.01 the internal modulation rate can be adjusted within a range of 1 to 100 Hz.

- The inputs and outputs now include stereo VCAs and separate VU meters. The knobs act as offset controls when their respective VCA inputs are patched.

- Pitch is now controlled by two separate inputs: the V/Oct input is exponential and the Pitch input is linear. When both inputs are used, their voltages are summed.

- A manual Trig switch (for capturing individual grains) has been added, in addition to the Trig input that was present on Clouds.

All other features of the original Clouds remain intact, including access to the alternate modes. Thanks to Olivier Gillet for making the original Clouds hardware and firmware available under open-source licenses. Third-party firmware such as Parasites (by Matthias Puech) and Beat Repeat (by Julius Kammerl) will be supported in future firmware updates after the initial release of the module.

Notes: 12-channel version of the MG mixer series packs a lot of functionality into a small footprint. Class A pre-amps, three-band EQ and neat, ergonomic design. Great value.

For a more precise control and enhancement of your sound, XU models of the MG Series come equipped with a suite of Yamaha's renowned SPX effects. Featuring high-resolution Chorus, Flanger, Distortions, Reverb and Delay, all with editable parameters, these are the same multieffects processors used on Yamaha's high-end mixing consoles, giving you the tools you need to elevate your mixes to a higher plane.

For more than a century, Yamaha has been building a legacy of superior craftsmanship and innovation exemplified in all of our products, from an unrivalled catalog of world-class musical instruments to touring-grade professional audio. Now in its third incarnation, the MG Series embodies this pursuit of design excellence, and incorporates some of the same technologies developed for use in high-end professional consoles, including studio-quality preamps, powerful digital processing, and a rugged, reliable construction. With an intuitive, easy-to-use interface, the MG Series boasts an extensive lineup of compact mixing consoles with models ranging from six to twenty channels, suitable for a diverse range of users and applications. For installed, recording, or live music settings, the solid construction and flexible design of these consoles lets you shape your sound with confidence, continually delivering peak performance and a level of sound quality and reliability unrivalled in its class.

D-PRE (Discrete Class-A Mic Preamps): This is where it all starts. Everything you do as a sound engineer is dependent on the quality of your preamps, which determines the direction your mix will take, and ultimately how good it is going to sound. MG Series mixing consoles feature Yamaha's studio-grade discrete class-A D-PRE preamps, which utilize an inverted Darlington circuit comprising two cascading transistors in a configuration that provides more power with lower impedance. Delivering fat, natural sounding bass and smooth, soaring highs, with very low distortion, D-PRE preamps possess an impressively wide frequency range that allow them to handle signal from any audio source without overly amplifying any specific elements of the sound. Having such a pure sonic platform to build on will ultimately save you time and effort by eliminating the need for excessive EQing or additional effects processing in order to "fix" your mix.

High Quality Sound Op-amp: The head amp determines sound quality, and op-amp integrated circuits are one of the most important parts in the head amp circuit. MG Series mixers feature new, high-quality, custommade MG01 op-amps that we developed in cooperation with the semiconductor manufacturer. Although many other Op-amps prioritize electrical design and efficiency, we worked directly with the semiconductor manufacturer to focus on sound quality first. MG01 op-amps feature redesigned circuitry in which even the internal components and wiring have been optimized, and use materials such as high-quality silicon wafers and copper wire to achieve superb resolution.

Switchable Phantom Power & PAD Switch: With phantom power, MG Series consoles allow you to take full advantage of the greater frequency response and high sound quality of condenser microphones. The input channel with PAD switch accepts MIC to line level of inputs, PAD Switch attenuates high input signals that often accompany mic'ed instruments during performance, avoiding the clippingthat can seriously affect your mix.

When was the last time you heard guitar without EQ or a completely unprocessed vocal on one of your favorite songs? Probably never. Yamaha mixers are famous for their flat response and sonic purity, but it often takes more than a perfectly-captured instrumental performance or vocal to achieve a professional-sounding mix. Equipped with some of the same state-of-the-art functionality featured on Yamaha's high-end consoles, the MG Series gives you the tools you need to produce high quality sound that is uniquely your own.

Notes: Incredibly powerful two-channel filter module capable of much more than just filtering. State-variable digital filters with built-in VCAs designed to overdrive beautifully. Sounds great.

Supplier's notes:
BIONIC LESTER MARK III is a 2-channel 2-pole state-variable digital filter with an unusual amount of good sonic character. The filter mode is continuously variable under manual or CV control, smoothly fading from lowpass to bandpass to highpass to notch to allpass with a single motion. The resonance stops just short of self-oscillation. A digital VCA controls the amplitude and the distortion of the input signal pre-filter. The filters have independent inputs and outputs, and an additional Mix output with balance control. The filter design was initially inspired by the best of late-1990s "virtual analog" filters and has gone far beyond.

The audio input controls have dual behavior. When the control (or CV input) is turned from zero position to the center, it operates as a simple gain control for that input. When turned past the center position towards the maximum, the signal will begin to soft-clip, adding hard clipping as the maximum is approached. This smooth and subtle distortion adds violence to otherwise unremarkable input material, generating additional harmonic content for the filter to process. The digital VCA that controls the gain and distortion functions is aware of the input signal's zero crossing, eliminating "clicking" noises when the gain is modulated.

Each filter section has three CV inputs. The first is a high-speed input hardwired to the filter's cutoff frequency, appropriate for snappy envelopes and slow moving voltages alike. The other two inputs (one with attenuverter control) are freely assignable to any of the filter parameters (cutoff, resonance, mode, gain), storable in a preset. The Mark III preset system stores eight fully programmed panel setups, instantly recalling everything under the harshest demands of performance. The Morph mode allows smooth fading between all of these presets.

Activate Filter B's LINK control for patch-free routing of the filter's control or audio signal. You can achieve dual-peak resonance, cable-free series routing, cascaded 4-pole filtering (with two stages of distortion), and full stereo using only one set of filter controls. The input normalization, LINK settings, and parallel mix output further reduce cable clutter while rapidly patching an elaborate signal flow.

The controls are arranged for maximum tweakability and minimum cable interference, with metal-shaft potentiometers attached to the panel on the large knobs. The Mark III OLED display displays the cutoff frequency in Hertz, resonance amount, and filter type morph. The CV inputs process all input voltages between -10 to +10 volts. Panel size is 15HP.

Notes: Mackie have always been strong when it comes to smaller mixing desks for studio and live use. The third-gen Pro FX12 continues that tradition. Lots of mix power for the money with a built-in audio interface too.

Supplier's notes:
The Mackie ProFX12 v3 12-Channel Professional Effects Mixer with USB is the ultimate affordable solution for live sound, home recording, and content creators. Now with our renowned Onyx mic preamps that offer 60db of headroom, everything from gain hungry mics to guitars will sound better than ever, and you can keep it all in check with simple single-knob compression. The new GigFX effects engine offers 24 built-in FX for even more options for adding the finishing touch. Record your tracks in 24-Bit/192kHz quality with 2x4 USB I/O plus zero-latency hardware monitoring for easy overdubs. Both ProTools First and Waveform OEM recording software/plugin packages are included.

Notes: The Analogue-only variant can ONLY be used via CV/Gate like the original CMU-810. MIDI is NOT available on this device.

Fully assembled and Calibrated.

The MSW-810 is a faithful recreation of the CMU-810 Monosynth which was designed as a synth expander for the 1983 CMU-800 computer music production system. At its core however, is the tone generator of the MC-202.

Specifications:

VCO

AS3340 Based
Range: 16'/8'/4'/2'
Pulse Width Modulation: 50% to Min
PWM Mode: ENV/Manual/LFO
Modulation Depth
Tune

Sound Mixer

Level Control Sliders: Square, Saw, Sub-OSC, Noise
Sub-OSC Waveforms: 1 oct down, 2 oct down, 2 oct down PWM

VCF

AS3109 Based
Cutoff Frequency: 10Hz to 20kHz
Resonance: 0- Self Oscillation
ENV Depth
Modulation Depth
CV Follow: 0-100%

VCA

Gate or Envelope

Envelope

Attack time: 1.5 ms to 2 s
Decay time: 2 ms to 10 s
Sustain Level: 0-100%
Release Time: 2 ms to 10 s

LFO

Rate: 0.1Hz to 20 kHz
Delay Time: 20 ms to 0.7s
Rate Indicator

VCA + Mixer

Level Control Sliders: Synthesizer, Input 1, Input 2, Output
VCA Bypass Switch
VCA Response: Lin/Exp

Jacks
Synth CV in: 1V/Oct, 0-7V, 3.5mm TS
Synth Gate in: 0-12V, On>2.5V, 3.5mm TS
VCA CV In: Lin 0.83 to 5V, Exp 0.83-4.58V, 3.5mm TS
Input 1: Unbalanced 1/4" TS
Input 2: Unbalanced 1/4" TS
Synth Out: Max -6 dBm, Unbalanced 1/4" TS
Mix Out: Max -10 dBm, Unbalanced 1/4" TS
Headphone Out: Stereo, 9-150 ohm, 3.5mm TRS
Accent In: 0-5V, 3.5mm TS

Power
9V DC, 500 mA, Tip positive. 120-240V Included

Dimensions
13"x2.5"x8"

Includes: Universal power supply, MSW-810 Synthesizer

Notes: Sunn O))) and EarthQuaker Devices are pleased to bring you the Life Pedal Volume III. The Life Pedal V3 circuit has been meticulously tweaked from the original to squeeze every last drop of heavy crushing tone available. The octave section has been fine tuned to make it more pronounced without losing the bottom end and we added a third footswitch, utilizing Flexi Switch Technology, for the octave to allow an additional method of quick and radical tone shaping. We are excited to have this back in permanent production, it is a true labour of love.

Life Pedal V3 is a distortion with a blendable analogue octave up and a booster combined in one compact package. The "Amplitude" side is faithfully modelled after the classic "White Face" distortion unit, using modern, reliable components to last a lifetime. The only modifications made to the original circuit are in the clipping section. The traditional circuit uses a single pair of silicon diodes for a tight, compressed crunch.

As with version 2, Life Pedal V3 offers two additional clipping options to better adapt to different rigs. The first position is no diodes to allow for full, grinding Op Amp assault at maximum volume. The second position utilizes two silicon diodes and one LED in an asymmetrical clipping configuration. This delivers a slightly compressed and smooth crunch, similar to a valve amplifier.

The last position is the stock double silicon diode configuration which provides that classic tone you know and love. The Octave in Life Pedal is an all-discrete, analogue full-wave rectifier base on a classic vintage design. Located at the input of the circuit, the Octave control slowly blends in the octave effects as you turn it clockwise. This feature can also be used via expression control allowing for wild, hands-free octave swells mid-riff or using the footswitch for immediate octave fuzz destruction.

Because this is an analogue octave effect, it is monophonic and works best playing single notes above the twelfth fret while using the neck pickup. Playing chords with the analogue octave will sound clanging and chaotic.

Using the bridge pickup and playing below the twelfth fret will produce a very subtle octave effect. Going full Octave transforms Life Pedal from a simple distortion device into a swelling, raging fuzz similar to the classic Super Fuzz!

The "Magnitude" section of Life Pedal is a simple all-discrete MOSFET booster designed to blast your preamp tubes and drive them wild. It is a 100% clean, no-nonsense, high impedance booster that adds very little colour to your tone. It does not add distortion on its own but has plenty of output to push your amp into saturation.

The signal path goes Octave>Distortion>Boost. The octave distortion and booster can be used independently with their own respective foot switches. The Petrine Cross is the octave distortion and the Christian Cross is the booster.

Notes: The #1 EQ pedal returns - better than ever

Empress Effects brought back the most sought-after Parametric EQ pedal, with groundbreaking upgrades.

Everything people loved about the original ParaEq was kept, and more fidelity and control have been added.

More Control

Whether you're trying to cut through a mix or fix a feedback issue, you need precision! The ParaEq MKII offers the most control of any pedal EQ on the market.

More Sweetness

Effortlessly sweeten your tone with beautiful sounding, super smooth Baxandall filters for broad high and low frequency shelving adjustments on the Deluxe.

More Power

The ParaEq MKII pedals operates internally at 27V, providing clean headroom without unwanted clipping.

More Purity

This pedal is able to offer the most control without degradation to the tone due to minimal circuit topology00-the opposite of graphic EQs.

Why Choose Parametric EQ over Graphic EQ?
Parametric VS Graphic EQ Graph
Graphic equalizers provide a convenient visual sense of the EQ curve. However, there is a tradeoff in transparency and precision.

The graph here shows the ParaEq MKII Deluxe (cyan) and a 7-band graphic EQ pedal (magenta) both providing a +4dB boost at around 2 kHz. As can be seen, the ParaEq is much more precise in the changes it can make, whereas the graphic EQ affects nearly the entire frequency spectrum. Furthermore, at around 10kHz the ParaEq is providing unity gain, whereas the graphic EQ is attenuating the signal by nearly 6dB. This makes the ParaEq a more transparent circuit than the graphic EQ.

This combination of transparency and precision is why recording studio control rooms are dominated by parametric equalizers, and why they're a great choice for creative and corrective EQ on your pedalboard.

Which ParaEq Do You Need?

The original ParaEq has been loved and trusted by musicians on a variety of instruments for over a decade. Both the ParaEq MKII and the ParaEq MKII Deluxe feature a low-noise, transparent signal path that is extremely versatile.

With three fully parametric bands, you can simultaneously achieve broad tonal shaping and precise fine-tuning to sculpt your perfect sound.

The ParaEQ MKII Deluxe will appeal to players who:

Need high-pass and low-pass filters for precision work at the frequency extremes
Want the glorious sound of Bandaxall filters for sparkling high end or extra weight in the low end
Want to be prepared for any EQ situation

Specifications

Input Impedance: 1MO
Output Impedance: 100O
Frequency Response (-3dB): 22Hz - 25kHz
Total Harmonic Distortion: < 0.05%
Noise: > 107dB
Headroom: +30dBu
Input Voltage: 9VDC Centre-Negative
Required Current: 300mA
Power Input Connector: 2.1mm Barrel Connector
Height (Enclosure Only): 1.5"
Height (Including Controls): 2.5"
Length: 3.5"
Width: 4.5"
Weight: 1lb

Notes: This is an exact hardware replica of the Mutable Instruments Blades module.

This model uses the original "hard-to-find" opamps, but After Later have substituted V2164M with AS2164D. All of After Later's products use AS2164D and there should be no measurable change in behaviour.

Notes: Another clever one from Knobula, this chord-based sequencer/arpeggiator adds versatile harmonic options to your creative process. Pair it with the Poly Cinematic module for best results.

Supplier's Notes:
Generate extraordinary chords without using a keyboard.

Chord Pilot introduces a whole new take on the task of chord creation and performance offering 192 chord memories, a strummer, an arpeggiator and an 8 step chord progression sequencer, all in one compact 12hp package.

Knobula have thrown away the music theory rule book and instead offer a module that encourages the curious mind to discover alternative musical pathways, whether for generative patches or for EDM riffs.

To generate a new chord, Chord Pilot uses a series of controls that alter the width and spread of 'fingers' over a virtual keyboard before conforming them into a variety of musical moods from the pure and harmonious to the terrifying and cacaphonic.

Like all Knobula products, Chord Pilot has been designed primarily with performance in mind, to inpsire by experimentation, to lose yourself in the moment, and to occassionaly generate impossibly hard to play super chords.

With the ability to store and transfer chords in sets of eight, Chord Pilot makes a great companion module for Poly Cinematic, but it is equally at home serving any poly synth with a midi input.

Discover Chord Pilot, your guide, navigator and explorer to a whole new universe of musical harmony, and beyond.

Notes: ALM Eurorack cases are available in a range of sizes all including an integrated powered bus boards.

The cases all feature anodised aluminium construction, an on/off switch, rubber feet, and high quality switched powered bus boards with numerous keyed headers and ample power capacity.

These are simple and compact Eurorack cases, perfect for small, focused systems, taking along on travels, or as a tabletop addition to a larger setup.

Cases are available in 4 sizes; 3U 84HP / 6U 84HP / 9U 84HP / 3U 52HP / 6U 52HP sizes. They all offer at least 1 Amp on both the -12V and +12V rails per row.

Great modern cases

The ALM powered Eurorack case was originally designed for the System Coupe. Wider interest has seen it evolve into a range of different sized cases being made available by themselves.

A fixed solid bus board provides quality ample power and plentiful keyed power connectors. The shielded DC/DC power converter is low noise and includes overload and short circuit protection. Fixed, quality mounting rails are used over sometimes frustrating sliding nuts. The case has a great looking all anodised aluminium construction that is both strong and light.

The case proportions are designed to look great on a table or desk (not too deep, just enough) and also be easy to fit in a bag and transport.

Decksaver case covers are available currently for the 3U/84HP, 6U/52HP, and 6U/84HP cases.

Common Features

Self assembled aluminium lightweight cases with integrated switched power busses.
At least 1Amp per -/+ 12V rail per row with quoted 100mV ripple noise at max load. No 5V rail.
Overload & Short Circuit protection.
Support modules up to 42mm depth (approx 2 stacked pcbs). All ALM modules fit.
M3 threaded fixed mounting strips (no sliding nuts!).
Module mounting screws and Allen key included.
Includes 12v external DC/DC power 'brick' with center positive 2.1mm barrel and at least 2 or 4 Amp rating (depending on model).

9U / 84 HP


Provides up to 2.5 Amp power on each -12V & +12V rails.
Connections for up to 32 modules.
Includes 5 Amp power 'brick'
External dimensions: 440x396x66 mm
No Decksaver currently available.

Notes: Reissued version of one of Dreadbox's back catalogue synths, the Erebus is a paraphonic design with two VCOs, a characterful low-pass filter, built-in delay and updated snappy envelopes.

Supplier's Notes:
Dreadbox's most unique sounding analogue synthesizer is finally back, warmer and snappier than ever!

All you synth lovers, the time has come to dive into the Erebus...

All Analogue Paraphonic Synthesizer
Faithful Reproduction of the Erebus V1
2 Oscillators with 2 Waveforms each
Separate Glide controls and Hard Sync function
2-pole Low Pass pre-fed Filter
1 ADSR envelope and a AR Amp Envelope
Snappier than the V1

OTA VCA
Lo-Fi Delay effect
Wide Range LFO
15 patch points for an astonishing and spectacular modular experience
Compact, USB powered, Eurorack Format (42HP)

Ethereal & Dreamy

Warm sounding Oscillators
Classic Dreadbox Filter
Snappy Envelope Generators
Lo-Fi Delay effect to expand your sound
CV outputs: Envelope, LFO, Mod Wheel, Gate, CV1, CV2
CV inputs: Osc1, Osc2, Echo, Cutoff, CV, Gate, LFO Rate, PW, VCA

Specifications & Connections

USB powered (1.5 Watts)
50 Playing hours with 20,000mA portable power bank
MIDI IN via DIN5
14 MONO TS Jack Out

Dimensions: 21.5 x 13 x 6.5 cm
Weight: 1 kg

Requirements:

USB-A Adapter (5v) with 1000mA or more
MIDI device or keyboard that is equipped with DIN5 midi output
Monitor, Amp or Headphones

Included in the box:

Erebus Eurorack module
42 HP case
1x DIN5 to 3.5mm adapter
1x Ribbon cable

Review: The Rolling Stones In Mono was first released in 2016 as a box-set charting the megagroup's entire roster of British and American studio albums. Deferring to the original mono playback format for which their music was originally recorded (and thus sounds best with) this monster compilation is a comprehensive look back at the Stones' 1960s heyday - plus their 2016 additional exclusives and rarities album, Stray Cats.

Notes: Stereo Field is one instrument with three uses. It is simultaneously a stereo/quad modular touch plate feedback atonal synthesizer, a stereo/quad audio processor and a pressure sensitive chaotic CV "controller". All three uses are available separately as well as simultaneously and in conversation with each other.

The Stereo Field allows its user to manipulate and patch two analogue stereo preamp circuits via touch plates. By utilizing skin conductivity as new paths for current to follow you are creating "new circuits" and new sounds in relation to where your fingers are patching. The individual touch plates are directly connected to nearly every connection point of every component in its circuitry (located directly under each corresponding touch plate).

When touched with multiple fingers it will create atonal analogue feedback with either of the two mirrored circuits represented by interlocking touch-plate circles. The resulting feedback can go beyond the abilities of human hearing (take caution!) and down to the very slow clicks of a saw waveform and both can often be happening simultaneously. These parallel mirrored circuits can be finger patched separately or together yielding vastly different chaotic results in regards to texture, timbre and stereo imaging. This instrument has the ability to create atonal synth tones in stereo (and quad) as well as process incoming stereo audio (and quad) sources via 1/4" and 3.5mm ins and outs. Incoming audio sources can be "patched" or rewoven into any area of either or both of the circuits via skin contact.

The two stereo input volume knobs (centre) shape and effect distortion, drive amounts, internal feedback pitch, and modulation rates depending on how your fingers are patching. The quad inputs and outputs via the 3.5mm jacks have small touch plates leading to and from allowing for touch access of each of the 4 inputs and 4 outputs. If multiple audio signals are traveling into the Stereo Field these audio sources can be intermingled and can modulate one another, again depending upon where your fingers are patching.

Sending CV signals into the 3.5mm input jacks will open up many more possibilities both in terms of synthesized sounds and audio processing. Since the two stereo circuits are mirror images of one another the 3.5mm ins and outs can also be thought of as (L/R,R/L) and when your hands get involved this imaging will be further confused and jumbled as your skin can intermingle all of these paths.

The Stereo Field can also be used as a controlled chaos source when using the 3.5mm outputs to send the feedback your hands create as CV to your modular system. Due to the nature of feedback and finger patching the 4 available CV signals have the ability to get incredibly complex, organic and textured in nature (see audio examples below in use with a euro-rack system). Because of the open nature of Stereo Field it can both send and receive CV modulation simultaneously. In addition, this can all be happening while your finger patching is changing and altering the incoming and outgoing CV while also processing incoming audio. These ins and outs can also be patched together with cables for sustained tones with the pitch/rhythm/volume/"cutoff" being affected by adjusting the incoming and outgoing volume knobs in various settings. Inter-patching in this way will also allow for sustained pulse beats and filter-esque sound shaping in addition to bringing new results to finger patching via the touch plates.

Most importantly, processed audio and synthesized audio are available simultaneously with the ability to influence and modulate each other. This will often blur the lines between the two; who is manipulating who, who comes out on top as audio and who is modulation? This can be a constantly evolving cycle based upon where the performers fingers are placed and highly sensitive skin contact pressure changes.

Notes: Collabing with YouTube sensation Andrew Huang, Endorphin.es offer up this impressive multipurpose processor module. Building blocks of stereo filtering, compression, reverb and more offer huge creative potential.

Supplier's Notes:
In collaboration with Andrew Huang, based on his modern music production techniques, Endorphin.es developed a creative audio processor with multiple blocks that can be moved around in order to achieve different flavours for sound design.

Processing unit without fixed structure: intuitively create astonishing and ephemeral timbres, from atmospheric rumbles to heavy or distorted textures.
Creative stereo effect processor with delay, reverb, filter and distortion with quickly explorable routing chain with single button press.
New generation ARM Cortex - M7 processor with 96 kHz 32 bit internal processing.
Lush hall and whooshing reverse reverbs with audio freeze and pre-delay.
Sidechain audio ducking envelope available both internally and externally with additional one knob single band compressor.
Tap delay with maximum delay time up to 2.5 seconds, external clock input with onboard clock divider and 1v/oct time control.
8x oversampled distortion algorithm.
Pre- and post - VCA, tone and volume controls with extra gain.

Power consumption
135 mA +12V
35 mA -12V
0 mA 5V

Dimensions
16 HP
26 mm deep with power ribbon cable connected.

Notes: The Z8000 Matrix Sequencer is a modulation source like no other: The 16 knobs of the Z8000 are accessed by ten sequencers with their own clock, direction and reset inputs. The ten sequencers are as follows:

Four 4 step CV sequencers on the horizontal.
Four 4 step CV sequencers on the vertical.
One 16 step CV sequencer on the horizontal.
One 16 step CV sequencer on the vertical.

The Z8000 can simultaneously modulate up to 10 CV parameters poly-rhythmically, with unprecedented motion complexity. One knob affects all 10 CV outputs! Imagine modifying 10 parameters from one knob. With its 30 gate and clock inputs and 10 CV outputs one can only imagine the possibilities, and all clock inputs can even be driven at audio rates! The Z8000 pairs well with the Trigger Riot and Circadian Rhythms and using it with the QuantiZer extends its capabilities as a high-precision 1V/Oct note sequencer.

Introduced in 2017, a new version of the Z8000 maintains the original circuitry but adds output range adjustment switches on the back and Tiptop's new colored look, which helps highlight the sections, on the front.

Size: 28HP
Depth: 15mm
Power: +12V 70ma / -12V 10ma

Notes: You've heard of parametric EQ, now meet the paranormal filter. Filter on steroids with experimental six-band EQ, delay and loads of LFO modulation. A powerful, creative take on a filter box.

Supplier's Notes:
Dementor Paranormal Filter is a powerful analogue filter with infinitive of option to modulate the sound, it's perfect to create field soundlandscape and introduce in the dark side of the sound with noise and harmonics feedback sounds.

The Dementor is a unique filter, EQ and delay that takes your signals and makes sure to add spice and character to your sound.

You send one or two signals through the machine by using the two independent signal inputs with level control. The special filter features cutoff and resonance control is LFO controlled - in fact, it's three LFOs for cut-off, resonance and time modulation. You also get an experimental six-band EQ called Nuances (not a usual EQ!) with level control and feedback. The echo/delay, is also LFO controlled.

Dimensions: 20 × 30 × 10 cm

Notes: A new way of doing things

Make recording easy

Eight award winning EVO Preamps alongside our advanced converter technology will make everything you do, sound better. Add to that, intelligent mic preamps that set their own levels with Smartgain, the all new, groundbreaking Motion UI control system, and enough I/O firepower to tackle even the biggest of sessions, EVO 16 is truly a studio powerhouse, designed from the ground up to make recording easy.

The EVO Mic Preamp

Get studio quality recordings - Level up your audio performance with eight sonically stunning EVO Preamps. Backed by 25 years of engineering experience, our analogue mic preamp has been designed to deliver the most accurate, clean, and true to source version of your audio, no matter what you're recording.

An analogue mic pre but better

The EVO Preamp technology not only has all the sonic advantages of an analogue mic preamp, but combines it with digitally controlled precision, giving you the ability to set your gain with pin-point accuracy, right down to the decibel.

Smartgain - A total gain-changer

Make recording drums and larger sessions easy with Smartgain. Automatically set the gain for all 8 channels at once with a simple touch of a button. Powered by our lightning quick Smartgain algorithm, Smartgain uses advanced peak analysis to automatically analyse, adjust and set your gain to the perfect levels - all in less than 20 seconds!

Your own assistant engineer

Record, adjust levels, repeat? Sound familiar? Save time and make recording on your own a breeze with Smartgain. Simply set up your mics, hit Smartgain, start performing and EVO 16 will take care of the rest.

Advanced Converter Technology - Clearer, sharper clarity

Providing a MASSIVE 121dB of dynamic range, EVO 16's high performance converter technology makes sure you hear your audio accurately, helping you make creative decisions confidently, identify issues and improve your recording and mixing game.

Line Outputs - Pick The Best Route

Connect and listen to your mixes through multiple sets of speakers with EVO 16's eight line outputs. Alternatively use the extra line outputs to send audio to external outboard gear, such as compressors or FX units, or to headphone amps for distribution to your artists.

Headphone Outputs- Clarity where you need it most

Drive even the most demanding headphones with EVO 16's two dedicated headphone amps. Easily power headphones up to 600 Ohms all while experiencing detailed monitoring and playback as well as plenty of volume.

Classic tone, modern sound

To build a monster guitar sound you need the right foundation. Our harmonically rich JFET instrument input circuit is designed to replicate the input stage of a classic valve amplifier, providing an ideal sonic foundation before you hit your guitar sims.

Digital I/O - Room For Expansion

Future proof your studio and configure your setup to tackle bigger sessions. Whether you're recording drums or taking on a full band, EVO 16's optical inputs and outputs have got you covered. Supporting both ADAT and SPDIF, add up to 16 channels of mic preamps to your setup, giving you plenty of options for expanding your studio down the line. Pairs great with any external mic preamp.

Specifications

Microphone Preamplifier
Mic Gain Range: 58dB
Line Gain Range: 58dB (-10dB pad)
Phantom Power: 48v +/-4v @ 10mA/Channel
Mic EIN: <-127.5dBu
CMRR: >80dB @ 1kHz
Maximum Input Level: +16dBu
Input Impedance (Mic): >3kO Balanced
Input Impedance (Line): >10kO Balanced
Frequency Response: +/-0.5dB 10Hz to 40kHz
Crosstalk: <-105dBu @ 1kHz <-103 @ 10kHz
THD+N @ 0dBu (1kHz): <0.0015%
SNR: 100dB
XLR: Pin 2 (Hot), Pin 3 (Cold) & Pin 1 (Shield)
1/4" Jack: IP (Hot), RING (Cold) & SLEEVE (Shield)

D.I
D.I Gain Range: 58 dB
Maximum Input Level: +10dBu
Input Impedance:500k
Frequency Response: +/-0.5dB 10Hz to 20kHz
THD+N @ 0dBu (1kHz): <0.1%
SNR: 100dB
1/4" Jack: TIP (Hot) & SLEEVE (Shield)

ADC Inputs
Digital Reference Level: 0dBFS = +10.5dBu
Frequency Response: +/-0.5dB 10Hz to Fs/2
Crosstalk: -125dBu @ 1kHz & 10kHz
THD+N @ -1dBFS (1kHz): <0.001%
Dynamic Range: 112.5dB A-Weighted

DAC Outputs
Maximum Output Level: 12dBu
Digital Reference Level: 0dBFS = +12dBu
Output Impedance: <50O
Frequency Response: +/-0.5dB 10Hz to Fs/2
Crosstalk: <-110dBu @ 1kHz
THD+N @ -1dBFS (1kHz): <0.001%
Dynamic Range: 121dB A-weighted
1/4" Jack: TIP (Hot), RING (Cold) & SLEEVE (Shield)

Headphone Output
Max Output Level: 11.25dBu
Output Impedance: <50O
Frequency Response: +/-0.5dB 10Hz to Fs/2
Crosstalk: -108dBu @ 1kHz
THD+N @ -1dBFS (1kHz): <0.001%
Dynamic Range: 118dB A-weighted
Max Level Into 30ohms: +8.5 dBu, 0.00094% THD+N, 1.66Vpk Power: 86mW
Max Level Into 60ohms: 10 dBu, 0.00079% THD+N, 2.55Vpk Power: 104mW
Max Level Into 600ohms: 11.2 dBu, 0.00057%THD+N, 3.83Vpk Power: 24mW
1/4" Jack: TIP (Left), RING (Right) & SLEEVE (Shield)

Notes: Eurorack and Newtonian physics meet in this clever 'movement simulator' module, capable of acting as a VCO, LFO, envelope generator, filter and more.

Supplier's Notes:
Inertia is a universal movement simulator. It generates output curves from input stimuli and the weight of its own motion-that is, its inertia.

Just as Newton described the motion of the planets and the motion of earthly bodies with a single set of laws, so too Inertia brings together several seemingly disparate musical functions with a single, elegant abstraction. Inertia can be used as:

A rich oscillator with 5+ octaves of temperature-compensated V/O and CV over skew
A quadrature sine wave oscillator
An LFO divider
A filter with controllable, skewable resonance, from a light touch to screaming glitches
An envelope generator with nuanced, natural sounding control over the minutiae of the attack and decay stages
An intuitive sine wave skew LFO
A phase locked loop
A voltage controlled exponential slew limiter
A slew limiter with controllable overshoot and settling (like a Wogglebug)
A percussive sound generator
And more uses that we haven't yet discovered

Inertia achieves all this complexity with simple controls. The exponential rate at which the output rises and falls can be set by the rise and fall controls. Inertia then follows an input signal according to these two rates, producing a first order and second order output. But things get interesting with the momentum controls. When you add some rise or fall momenta, the output signal exceeds its target in that direction before returning to its destination. With momentum, you can create ADSR-like envelopes, skewed filter resonance, etc. When momentum is all the way up, Inertia self-oscillates, acting like an LFO or VCO.

In addition to rise/fall mode, Inertia can be set to value/skew mode, in which these same parameters are controlled as overall frequency, plus the skew between rise and fall rates, and overall momentum, plus the skew between rise and fall momenta. An LED colour and position indicates which mode is being used.

Inertia is inspired by the Dual Universal Slope Generator (DUSG), invented by Serge Tcherepnin for his Serge synthesizer system. Rather than duplicate the DUSG in a new wrapper, Inertia builds on the innovative, abstract impulse at the heart of the DUSG to create something different and new. This all-analogue circuit is original both in concept and execution, but it grows in rich soil.

Size: 14HP
Depth: 25mm
Power Consumption +12V 72mA, -12V 72mA
Timing Range: 50s-7ms (low), 7Hz-50kHz (high)
Tuning Accuracy: ~5 octaves
Self-Oscillation Range: -6V-+6V peak
Full I/O Range: -9.5V-+9.5V peak
Input Impedance: 50kO
Output Impedance: 150O
Output Drive: 2kO (min), 20kO+ (ideal)

Notes: ***B-STOCK: Box opened, but product is in excellent condition and in perfect working order***


The best of both worlds, combining analogue drum circuits with samples and Korg's Multi Engine. Versatile step sequencing, built-in effects and seamless connectivity.

Supplier's Notes:
The introduction of Drumlogue marks a paradigm shift for drum machines. It combines the rich and raw power of analogue, the flexibility and convenience of digital, and the deep customisation of a unique SDK. A heavy-duty dynamic sequencer, powerful effects, and intuitive controls make Drumlogue a must-have in any setup.

The power of analogue

Drumlogue features completely new analogue circuitry from legendary Korg engineer: Junichi Ikeuchi (ARP 2600 M, MS-20 Mini, ARP Odyssey). The depth and richness of its sound is on a whole new level. New analogue circuits for bass drum, snare drum, low tom and high tom provide a solid foundation, and elevate tracks with harmonic richness and a thick low end.

The versaility of digital

Drumlogue has 7 digital parts: 6 sample-based and 1 Multi Engine based. The sample-based parts can play a wide selection of pre-loaded PCM samples alongside imported user samples. These can be easily loaded into Drumlogue by connecting to a computer via USB and simply dragging and dropping into its main memory.

Endless creative potential

The wildly popular Multi Engine from Minilogue XD is made even more powerful: in addition to Variable Phase Modulation (VPM) and Noise generator engines, the Multi Engine in Drumlogue features a new user slot able to play fully-fledged synth voices - providing vast sonic possibilities never before heard on a drum machine.

Custom Synths

Synth voices in Drumlogue are so much more than static waveforms. Custom synths can be built to not only generate sound, but can also draw on built-in filters, LFOs, MIDI controlled polyphony

Exclusive "Nano" plugin

Korg has collaborated with popular plugin developer "Sinevibes" to create a brand new synth plugin for Drumlogue: Nano. This exclusive plugin explores the power behind the newly expanded Multi Engine and gives an incredible first taste of the platform.

"Nano" is a full-fledged virtual analogue synth with a broad array of features and customisable parameters. The synth engine has dual oscillators with optional ring modulation, a 4-pole state-variable filter with soft clipping distortion, built-in EG and built-in multi-waveform LFO.

Sequencing powerhouse

At the heart of Drumlogue is a flexible, easy-to-use, and extremely powerful 64-step sequencer. This makes it easy to create complex patterns and polyrhythms that elevates the music creation process. Innovative features are available including per-step probability, per-step alternate trigger patterns, per-step micro offsets, per-track groove patterns and much more. With the clear OLED display, it's also easy to follow and edit your sequences visually.

Chain mode makes creating long and interesting patterns simple. In loop mode you can switch between several variations to play sequences in new and interesting ways. The Motion and Accent recording functions are fast and intuitive, and if you want to try new things on your track, the randomisation function is there to help you.

Effects and customisation

Drumlogue has high-quality effects across three categories that can be used simultaneously: delay, reverb and master effects. The send amounts for delay and reverb effects are set independently, with multiple return points also available. Master effects add that final polish to the sound and can be bypassed on a per-part basis, meaning it's possible to send the effect to specific audio parts. A sidechain bus is also available to the master effects section.

Drumlogue has an audio input, so you can process other instruments through Drumlogue's effect chain, making it an ideal companion for your studio setup.

Connectivity

With a wide range of I/O, Drumlogue can be integrated seamlessly with your rig. A USB-A port supports connectivity with USB MIDI class-compliant devices, meaning volumes can be controlled with the faders on a nanoKONTROL 2, or sounds triggered by the pads on a nanoPAD 2.
It almost goes without saying that Drumlogue easily syncs with other gear via the MIDI in/out, sync in/out, or via USB MIDI.

Four individual outputs are available, in addition to headphone and main L/R. Any part can be assigned to any output, allowing for expanded routing versatility with external processing and multi-track integration.

Ease of use

Drumlogue is incredibly easy to use - having been designed with simplicity and accessibility in mind. The most important parameters for the main drum parts have dedicated knobs on the front panel for on-the-fly adjustments, as well as dedicated volume pots for each part to speed up the mixing process.

A wide and clear OLED screen coupled with a simple UI and 4 dedicated encoder knobs makes the navigation process fast and smooth.

Design

Unlike other drum machines, Drumlogue's main panel is slanted. This offers superior ergonomics and visibility, while a brushed aluminium body and wooden side panels add to the premium look and feel.

Specifications

Polyphony: 11 voices (*)
(*) User synths may be played polyphonically via MIDI, the actual voice count will depend on the synth's implementation

Sound Engine
Analogue:4
PCM / User samples: 6
Multi-engine(NOISE, VPM, User Synthesizer): 1

Number of Programs (including rhythm patterns): 128 (64 preset programs by factory default)
Effects: Reverb, delay, master

Inputs / Outputs
Headphones
OUTPUT, (L/Mono, R/Audio, Out 1-4)
Sync In/Out
Audio In, MIDI In/Out
USB A (To Device) (Only for MIDI controllers)
USB B (To Host)

Power supply: AC adapter (DC9V)
Dimensions (W × D × H): 317 × 189 × 73 mm/12.48" × 7.44" × 2.87"
Weight: 1.4 kg/3.09 lbs.
Included items: AC adapter, Precautions, Quick Start Guide

Notes: Delay and granular sampling combine to create unique ambience effects, creative reverbs and glitchy chaos. Hugely versatile pedal with five contrasting programs.

Supplier's Notes:
In the high woodlands of the north, undiscovered by most inhabitants, there ruled a clan of old, mystic Treefolk. On the first new moon of spring, these Treefolk could be heard grafting limbs to grow their young - splicing bits of branches from each generation to produce the next line of Treefolk. These new beings keep the lifeblood of all who came before in their new skin. These sounds are in part very old, but in part very new. They are referred to as... Fable.

Let your storybook adventure grows with the Fable Granular Soundscape Generator. The Fable gives you five all-new programs centered around sample and chop delay algorithms to create bizarrely beautiful networks of sampled and resampled sounds. The Fable uses a powerful dual DSP architecture to combine delay programs in series with granular sampling algorithms, each with its own analogue feedback path. Find unique soundscapes ranging from smooth, flowing ambience; to bizarre, organic reverberance; to chaotic, glitchy swarms.

So, what exactly is this granular effect and why is it a magical experience when combined with delay? Granular is a digital processing technique of micro-sampling, wherein short samples called grains are read from a delay buffer. In the Fable, players can adjust these grains by manipulating their sampling length, position, and buffer size from which they're read. They can be played at double or half speed for pitch shift and time stretching effects, play them in reverse, read from multiple positions, and more, in order to achieve different effects.

It's a powerful but complex technique and Walrus Audio created five streamlined programs in the Fable that explore different aspects of its sonic range.

Programs

I. Reverse Delay into Reverse Granular

Program 1 runs a reverse delay into a reverse granular algorithm, in which sampled grains are played backwards. Reversal and re-reversal build up in the feedback paths, creating a complex and organically shifting soundscape. Turn grain size down for long, smooth reversed transients, and grain size up for stuttering reverse glitch madness.

II. Forward Delay into Octave Up Granular

Program 2 runs a forward delay into an octave-up granular program, in which sampled grains are played at double speed. Swarms of double-speed grains build up in the feedback path for bright and airy cascades of sound.

III. Analogue Delay into Octave Down Granular

Program 3 runs a warm, dark analogue-style delay into an octave-down granular program, in which sampled grains are played back at half speed. Slowed down repeats combine with analogue-style processing to create deep, thunderous footfalls and thick, murky ambience.

IV. Multi-Tap Granular into Multi-Tap Granular (Grain-Verb)

Program 4 runs two multi-tap granular algorithms in series, in which multiple samples are played back from each granular buffer simultaneously. Multiple points of sampled sound build upon each other in the feedback paths to create glitchy clouds and unique organic reverberance. Time in this program controls time-stretching of both granular algorithms, changing both the length and tonal character of the granular effect.

V. Forward Delay into Randomized Pitch Granular

Program 5 runs a forward delay into a randomized pitch granular program, in which each grain is played back at a randomly selected speed and direction, varying between pitched up double speed, pitched down half speed, normal speed, plus forward and reversed playback from grain to grain. Pitch changes with each new grain, so play with the X knob in this program to control the rate of randomized pitch modulation.

Review: Recorded over three nights at the iconic Red Rocks Amphitheatre in Morrison, Colorado, endlessly prolific Aussie psych-rock auteurs King Gizzard & The Lizard Wizard invite you to experience their intense live shows in the closest manner to being there in person and the only way they know how (with an absurdly massive 12xLP self-proclaimed bootleg collection). Taken from performances on Oct 10th, Oct 11th and Nov 2nd of last year, these 80+ cuts run the gamut through the collective's heaviest, softest, most direct and ludicrously impenetrable sonic meanderings, whilst wrapped in individual sleeves with an accompanying photo journal of their great takeover of the Colorado plains.

Notes: The Seabee is a multi-chorus pedal that delivers the finest analogue bucket brigade chorus tones, but like any Beetronics, it goes a few steps further. By digitally controlling the chorus delay time, the Bees have created Harmochorus - a never-before-heard pitch shifting modulation that can certainly inspire new genres.

Three Chorus modes provide the classic, lush chorus and vibe sounds we all love, with each mode offering the ability to control the effect in different ways. Vary between two different speeds and/or depths, go from zero to full depth intensity, or even increase the chorus delay time for a whole new spectrum of sounds.

Three Harmochorus modes give you a unique and inspiring new approach to the effect. The easiest way to explain it's that, when clean, it sounds like angel bees are accompanying you, and when paired with some buzz, it sounds like a swarm of killer bees producing the most dangerous pitch shifting modulation are after you! You can choose between two different pitches and speeds, a combination of twelve chords and twelve different arpeggio patterns, or simply choose between thousands of random patterns.

No matter which mode you choose, the Seabee will navigate you to inspiring and creative places.

Its simple layout with only three knobs hides a multitude of possibilities with alternate controls, three ramp shapes, tap tempo, a 4-way tone filter, feedback control, and a rate that ranges from very slow to ultra-fast waves, even reaching ring modulator ranges.

There are two stereo output options, 16 onboard presets, full MIDI control, expression in, external tap and 4 input level options so you can process guitar, bass, all kinds of active pickups or synthesizers and still keep the bucket brigade in its sweetest spot?

It's hard to believe that an analogue chorus can be so complete, versatile, unique and intense - all at the same time. But get ready, because Tone Fishing is about to beecome a thing.

Analogue sound path with the finest bucket brigade chorus tones.
3 Chorus modes / 3 Harmochorus modes
Never before heard pitch shifting chorus with arpeggios and random patterns.
Truly expressive ramping gives you musical control.
16 Onboard presets, Tap Tempo, MIDI, Expression and more.
Selectable input level (supports guitar, bass, active pickups, synthesizers and more)
Hand-assembled in Los Angeles, CA.

Packaging Dimensions: 15.2 x 13.7 x 7.6 cm
Weight: 0.49 kg

Notes: The updated Chronoblob offers versatile, creatively interesting delay. Four modes offer a choice of stereo settings or mono with patchable feedback send and return. Tape-style modulation allows for fun pitch bend effects.

Supplier's Notes:
Chronoblob2 is a digital delay module!

Just like his little brother, Chronoblob2 can sync to a clock signal. Patch one into the SYNC input and choose a multiplier or divider for rhythmic delays. Or leave SYNC unpatched for access to continuously variable delay times!

Chronoblob2 offers four different delay modes! Dual delay mode provides two separate delays with shared controls. Ping-pong mode extends this intermingling even further by placing each delay in the feedback loop of the other.

Single delay is the classic Chronoblob mode with feedback SEND and RETURN. Patch in a lowpass filter for smooth, shadowy echoes, or get weird with a wavefolder or any other effect! Cascade delay mode expands on this archetype by also placing the second delay inside the feedback loop of the main delay, creating a wild multiplying echo effect.

Chronoblob2 provides control voltage inputs for TIME, FEEDBACK, and DRY/WET, and bipolar attenuators for each so you can dial in just the right amount of control.

In Dual and Ping-pong delay modes, although both delay times are controlled by the main TIME knob, you can voltage-control each independently with the two TIME CV inputs. The right TIME CV is normalled to the left one so you can easily control both with the same signal. Additionally, the left TIME CV is normalled to five volts, allowing you to use the attenuators as offsets from the position of the main TIME knob.

Also in these 'pink' modes, the right audio input is normalled to the left input, and the right audio output is normally mixed into the left output (patching into the right jack breaks this connection).

Like the original Chronoblob, you can select the style of time modulation with the slide switch. Choose tape mode for sweeping pitchbend effects or fade mode for smoother, cleaner changes.

Chronoblob2 offers an INFINITE LOOP button and gate input to shut off the delay inputs and lock the feedback at 100%.

Specifications:
Audio: 16bit, 48kHz
Delay: 5ms to 2.73s
Power: +12V: 80mA, -12V: 15mA
Width: 12HP
Depth: 30mm (including power connector)

Includes power cable and Befaco Knurlies M3 mounting screws.

Notes: Noise's 'simple' take on delay is anything but simple. Three-tap stereo design with wave folding, DJ-style filtering and extensive CV control. Versatile and characterful.

Supplier's Notes:
Delay. Fold. Pitch shift. Doom. Repeat repeat.

Yester Versio is the long-awaited answer to the request for a simple delay on the Versio platform. Yester Versio is a three-tap delay designed to be straightforward and easy to control. It's perfect to help glue together almost any patch, with just enough character to stand out if that's what you want.

Yester Versio comes with controls over panning, delay feedback, and delay time, but Noise Engineering didn't stop there. The Time control interacts with the Even/Triplet/Dotted switch, allowing for flexible delay syncing. These also work with the Tap button and jack input, making it easy to sync Yester to the rest of your patch and create interesting rhythms.

Use the DJ-style filter to shape your delays. Add flavor with Chorus, a bipolar control that adds a bit of clean pitch shifting or LFO-modulated effects. Turn up Fold for some gentle saturation, then gritty wavefolding, and at the top of the knob, to add in chaotic suboctaves for a bit of doom.

And of course, because it is a Versio, almost everything can be CV controlled.

Yester Versio is the delay you will keep coming back to...back to...back to...

YV is part of Noise Engineering's Versio stereo DSP platform. A simple USB connection will allow you to update to a variety of effects firmwares. Open-source support is available through libDaisy, which allows you to write your own firmware!

Notes: Delay. Fold. Pitch shift. Doom. Repeat repeat.

Yester Versio is the long-awaited answer to the request for a simple delay on the Versio platform. Yester Versio is a three-tap delay designed to be straightforward and easy to control. It's perfect to help glue together almost any patch, with just enough character to stand out if that's what you want.

Yester Versio comes with controls over panning, delay feedback, and delay time, but Noise Engineering didn't stop there. The Time control interacts with the Even/Triplet/Dotted switch, allowing for flexible delay syncing. These also work with the Tap button and jack input, making it easy to sync Yester to the rest of your patch and create interesting rhythms.

Use the DJ-style filter to shape your delays. Add flavor with Chorus, a bipolar control that adds a bit of clean pitch shifting or LFO-modulated effects. Turn up Fold for some gentle saturation, then gritty wavefolding, and at the top of the knob, to add in chaotic suboctaves for a bit of doom.
And of course, because it is a Versio, almost everything can be CV controlled.

Yester Versio is the delay you will keep coming back to...back to...back to...

YV is part of our Versio stereo DSP platform. A simple USB connection will allow you to update to a variety of effects firmwares. Open-source support is available through libDaisy, which allows you to write your own firmware!

Notes: VastWave is a complex analogue Oscillator with advanced waveshaping capabilities that invites new textural and harmonic exploration beyond subtractive synthesis principles.

Crossfading between harmonically rich folded waveforms and waveforms with Odd/Even harmonics, the VastWave waveshaper expands on the Principal Oscillator heritage, bringing an additional set of waveforms with Odd and Even harmonics and a pulse waveform derived from the Waveshaper's Final output stage.

Furthermore the linear FM input has a dedicated VCA for external FM amplitude modulation and an on board linear Glide delivers a more musical approach to this classic feature.

Features:

Voltage controlled complex waveshaping.
Triangle core.
FM input with voltage controlled amplitude for FM amplitude modulation.
On board linear Glide.
Voltage controlled Pulse-width modulation for Pulse and Final Pls waveforms.
Modern temperature and tuning stability.
High Frequency (VCO) or Low Frequency (LFO) operation.
External Timbre input with sine wave normalization if no external source is patched.
Attenuator/inverter knobs on all voltage controlled inputs.
Inverted or double Sawthooth waveform (selectable by jumper).


Specs:

Width: 16HP
Depth: 33mm
Power consumption: ###mA +12 / ###mA -12
Eurorack Format
Doepfer power connection

Notes: This module provides you with four motorised faders (aka flying faders) to be attached to your DROID master. You can attach up to 16 of these units (or any other DROID controllers) to one master, so the maximum number of faders on a DROID is 64. Below each fader is a touch button and an LED.

You can use the faders, the buttons and the LEDs in very flexible ways to control all parameters in your DROID patches, like steps of a sequence, volumes of channels of a digital mixer (controlled via MIDI with the X7), parameters of a large bank of envelopes, CV values that are organized in presets and much more.

The special thing about the motorized faders is that each fader can be assigned several functions or presets. When you switch the function, the fader moves to the exact position that corresponds to the current value. The usual Eurorack "picking up" of potentiometers or faders, where you never know exactly which value is currently set, is now a thing of the past.

Another unique feature is the "haptic feedback". If a fader is used, for example, in a sequencer to select a note from a scale, you can feel each individual note like an artificial notch. The fader intelligently creates these virtual grooves with its motor. This is very useful and very intuitive whenever you use the fader to select one out of several discrete values. Other examples are clock divider settings, the number of a preset, a waveform, a clock offset and much more. Due to the haptic feedback you don't need any display for seeing what you are doing. You can concentrate on making music and play very intuitively.

Another kind of haptic feedback is a kind of "pitch bend wheel", where the fader always pushes back to the center position by itself. Here the motor creates an artifcial spring. When setting analog values such as a volume or a filter cutoff, the fader then runs freely, of course.

Applications

The DROID plus the faders can be used for various applications - and due to the possibility of switching even at the same time! Here are some example:

A multi track performance sequencer
Use a MIDI controllable digital audio interface as mixer
Control a bank of four envelopes with A, D, S, R each with just four faders
Use the faders for CV presets
Use the faders and their haptic feedback for live performing with pitch bends, ratcheting and all other crazy stuff
Power
Motor faders need much energy. Theoretically one single fader can draw up to 800 mA when at full power. That seems to be the main reason why nobody dared in bringing motorised faders into Eurorack so far.

Der Mann Mit Der Maschine have solved that challenge by making use of the fact that the fader need their power always just for a very short time. The M4 unit comes with four big power tanks (called super caps) that are loaded with a low current but provide the full power when the faders need them. That way the maximum current of one M4 unit is limited. With jumpers on the back you can choose between a peak current of 350, 450, 500 or 600 mA.

Dimensions
14 HP
42 mm deep

Current Draw
350 mA +12V

Notes: ***B-STOCK: Box opened, product in perfect working order***


Improving feel and workflow, and making the best of hardware and software available in one place, Console 1 Fader allows you to raise the sound quality bar to new heights. Mixing a masterpiece isn't easy, but with Console 1 Fader there's no limit to what you can do. Now's the time.

Ten touch-sensitive 100 mm Alps motorized faders give premium professional feel and feedback, while the weighty powder-coated steel chassis means durability and substance in a sleek Scandinavian design.

Fader includes two console emulations (Tube and Discrete). Way more than a simple controller, Fader enriches the sound of your tracks in the same ways as a true analog console.

Riding faders is muscle memory for many mix engineers. For those of us who play the desk like an instrument, Console 1 Fader gives quick and intuitive control over volume, saturation, filtering, and much more.

The Console 1 mixing ecosystem is so much more than a simple DAW/plug-in controller. It's an efficient, elegant, and amazing-sounding modern mixing solution, combining hardware and software to give you the best of both worlds: the versatility, affordability, and usability of in-the-box mixing, alongside the workflow, feel, and focus dedicated hardware can bring.

Console 1 Fader can be used alone, or in combination with the original Console 1 channel strip controller for a tight 'complete desk' experience. You can even use multiple Console 1 Fader units to build the ideal workflow for your specific studio.

There are many ways to mix a masterpiece, but riding faders is a matter of muscle memory for a lot of us. And for good reason - reaching out and grabbing five or ten different sounds or groups at once, and quickly adjusting, listening, adjusting, listening, balancing... it's a full-body discipline, and software alone can't come close.

Tapping into the same purpose-designed software environment as the original Console 1 channel strip controller, Fader brings new levels of control over the wider world of your mix. You can ride up to ten channels at once, working volume, high-and-low-cut filter values, drive and drive character (modeled desk saturation), and more. Then page up for ten more channels. And ten more, until you have easy access to your whole mix, even when tracks number into the hundreds.

Expandable with world-class sounds
Because all the audio signal processing happens in our award-winning component-modeled software, you can switch out the 'circuitry' of your console instantaneously for a different desk sound across your whole project, or even channel by channel.

In addition to the two analog console sounds Fader ships with, you can purchase any of our Console 1 channel strips and use those classic desk sounds with Fader.

Selected features

Fader modes
Fader allows you to quickly and intuitively control track volume, drive level, drive character, input gain, low cut, high cut, and up to three send levels, all from the same high quality motorized faders.

Transport controls
The three assignable buttons work by default as basic transport controls for the major DAWs, but each can be assigned to a keycommand of your choice (e.g. CTRL+Z), for whatever use you can imagine.

Encoder
Mounted on a high-grade all-metal potentiometer, Console 1 Fader's single encoder offers control of pan per track, but also unlocks a powerful stereo spatialization tool, to widen or consolidate your individual tracks, situating each sound perfectly in your mix.

Layer mode
With our innovative new 'Layer Mode' you can create layers of tracks, putting many levels of mixing at your fingertips. Low cut all your guitars at once, or saturate your groups early on for a top-down effect in seconds.

In short
A 10-fader approach to Console 1, our hybrid hardware/software mixing ecosystem
High quality hardware, designed and built for both feel and function
Take fast and intuitive control of volume, saturation, filtering, and more
Two awesome-sounding component-modeled console emulations included
Expand your sonic options with Console 1 expansion channel strips (sold separately)
'Layer Mode' allows you to organise and affect your mix in powerful new ways
Spatializer tool offers fast per-channel control of stereo width
Works with all major DAWs straight out of the box - no MIDI-mapping required
Use alone, or in combination with the original Console 1 channel strip controller

Notes: Beautiful combo of vintage tech and modern features from Benidub's boutique analogue phaser unit. Six-stage stereo processing with real-time switching to 12-stage mono mode. Excellent playability with large controls.

Supplier's Notes:
Old school mojo with a modern twist on versatility and sound quality
PHASE is an analogue optical phaser, featuring 12-stage in mono and 6-stage when used in stereo. You can switch between the two modes with the "Mode Select" control any time. We made it completely clickless, allowing you to flawlessly switch mode during your set! This unique control provides even more playability and a wide range of phaser tones.

100% analogue audio path for subtle-to-extreme true phasing colours and tones

Unlike many other phasers in the market, designed after guitar-frequencies needs, Benidub's PHASE has been built with a "studio" oriented design in mind, making it the best phaser for either producers and musician. From studio-standard headroom to balanced connections, everything is designed to improve sound quality while granting a smooth and precise excursion along a wide frequency spectrum.

Features

100% Analogue
As any other BENIDUB device, Phase is precisely built with high quality components for a complex and organic sound. The optical-based design not only ensures the best signal/noise ratio for a phaser circuit but also provides the iconic old-school timbre we all love.

Versatile Routing
PHASE can be used as a 12-stage mono or a 6-stage stereo phaser. We designed it as a playable feature, allowing you to switch between the two modes with the Mode Select, clickless control. Not just a "setting", but a tool to build new phasing effect possibilities.

Performance Oriented Design In A Sturdy Case
While designing PHASE we kept our easy-to-use, performance oriented philosophy. PHASE comes in a tank-built enclosures with every control you'll ever need on board, making it an extremely playful stompbox.

Specifications
1. Input L:

1/4" Balanced or Unbalanced jack. The "main" mono input of the unit.

2. Bypass:

Turns off the out of phase signal, thereby stopping the phaser effect.

3.LFO Depth:

Sets the amount of modulation.

4.Input:

In INSERT mode, you got the usual 50/50 dry signal. In AUX mode, you got the full wet signal.

5. Mode Select:

On MONO you get 12 stages. On STEREO you get 6-stages per channel. The stereo mode can be used with a mono input to generate a mono-to-stereo output.


6. Power Input:

12VDC, 500mA, center positive, 2.1mm*5.5mm barrel connector.

7.LFO Mode:

In LINEAR mode, all the 12 (6+6) stages will receive the same modulation. In MIRRORED mode, the first batch of stages modulation will be inverted.

8. LFO Rate:

Sets the modulation speed.

9. Centre frequency:

Sets the frequency that the phaser will revolve around. The Centre Frequency determines where the middle of the comb-filter will be on the spectrum.

10. Feedback:

The feedback knob controls the amount of phase-shifted signal that gets fed back to the phase-shifting circuit.

Notes: Small but deeply impressive desktop monitors. Two-way design based around a 4-inch woofer which produces much better bass response than you'd imagine possible for such a compact speaker.

Supplier's notes:
When workspace is at a premium, don't compromise on quality. With the 8020D, Genelec's renowned accuracy and reliability will fit your project and your space.

The Genelec 8020D is small in dimensions, but big in ambition. The 8020D, introduced in 2017, even delivers 4 dB higher SPL and has a lower energy consumption than earlier models of 8020. Designed to suit the broadest possible range of listening environments, 8020D thrives when space is at a premium, and draws on the innovation of the 8000 Series for an unrivalled near-field experience.

Trust in the colour-free, accurate reproduction of the Minimum Diffraction Enclosure (MDE), while relying on the precise on- and off-axis frequency reproduction of the Directivity Control Waveguide (DCW). And when you're finished, Genelec Intelligent Signal Sensing (ISS) circuitry detects when your system is no longer in use, placing it into an environmentally friendly, power-saving standby mode. From post-production studios to OB vans and DAW-based rooms, the 8020D is your near-field solution of choice.

Notes: Ever since the 1970's the iconic white woofer and signature sound of Yamaha's nearfield reference monitors have become a genuine industry standard for a reason - their accuracy. Unlike studio monitors with added bass or treble frequencies which may sound more flattering at first, HS Series speakers were designed to give you the most honest, precise reference possible, providing an ideal sonic platform to build on throughout the mixing process.

By combining acquired knowledge and expertise with state-of-the-art sound technologies, Yamaha's speaker engineering team have examined, then optimized, every aspect that has contributed to making these monitors the most trusted in the business. The second generation HS Series also adds a new 6.5" model to the lineup, bringing its exceptional accuracy to an even greater variety of recording environments.

8" bass-reflex powered subwoofer delivers low frequencies down to 22Hz
22Hz - 150Hz frequency response
High-power 150W amplifier exclusively designed for low frequencies
LOW CUT switch, LOW CUT control (80-120Hz) HIGH CUT control (80-120 Hz)
PHASE switch allow users to set up a subwoofer system with simple connections and no additional equipment
XLR and TRS phone for inputs and XLR for outputs

Notes: Desktop module incarnation of Electrosmith's customisable DSP platform, designed with plenty of audio, MIDI and CV connectivity to allow you to create your own synths, drum machines and sequencers.

Supplier's Notes:
Create a mono-synth, drum machine, or MIDI sequencer with the Field! It works as a great development tool, or handy small-form synth to take with you on the go. Comes with Daisy installed and 9V power adapter.