搜索结果

Notes: Incredibly powerful two-channel filter module capable of much more than just filtering. State-variable digital filters with built-in VCAs designed to overdrive beautifully. Sounds great.

Supplier's notes:
BIONIC LESTER MARK III is a 2-channel 2-pole state-variable digital filter with an unusual amount of good sonic character. The filter mode is continuously variable under manual or CV control, smoothly fading from lowpass to bandpass to highpass to notch to allpass with a single motion. The resonance stops just short of self-oscillation. A digital VCA controls the amplitude and the distortion of the input signal pre-filter. The filters have independent inputs and outputs, and an additional Mix output with balance control. The filter design was initially inspired by the best of late-1990s "virtual analog" filters and has gone far beyond.

The audio input controls have dual behavior. When the control (or CV input) is turned from zero position to the center, it operates as a simple gain control for that input. When turned past the center position towards the maximum, the signal will begin to soft-clip, adding hard clipping as the maximum is approached. This smooth and subtle distortion adds violence to otherwise unremarkable input material, generating additional harmonic content for the filter to process. The digital VCA that controls the gain and distortion functions is aware of the input signal's zero crossing, eliminating "clicking" noises when the gain is modulated.

Each filter section has three CV inputs. The first is a high-speed input hardwired to the filter's cutoff frequency, appropriate for snappy envelopes and slow moving voltages alike. The other two inputs (one with attenuverter control) are freely assignable to any of the filter parameters (cutoff, resonance, mode, gain), storable in a preset. The Mark III preset system stores eight fully programmed panel setups, instantly recalling everything under the harshest demands of performance. The Morph mode allows smooth fading between all of these presets.

Activate Filter B's LINK control for patch-free routing of the filter's control or audio signal. You can achieve dual-peak resonance, cable-free series routing, cascaded 4-pole filtering (with two stages of distortion), and full stereo using only one set of filter controls. The input normalization, LINK settings, and parallel mix output further reduce cable clutter while rapidly patching an elaborate signal flow.

The controls are arranged for maximum tweakability and minimum cable interference, with metal-shaft potentiometers attached to the panel on the large knobs. The Mark III OLED display displays the cutoff frequency in Hertz, resonance amount, and filter type morph. The CV inputs process all input voltages between -10 to +10 volts. Panel size is 15HP.

Notes: Your Palette case is the ideal solution for your space conscious and/or portable needs. It fits comfortably on your desktop; at your favourite coffee shop; in your jam space; or pretty much anywhere else you might desire to play. Your imagination is the only limit. With either 62hp or 104hp of rack space, you can piece together powerful but focused mini systems and control surfaces. Intellijel's 1U row and built-in i/o ports add a ton of extra utility to bring the most out of your eurorack modules. Truly a palette for the sonic artist.

High spec 60 Watt power supply capable of powering up to 24 modules with +12 V output at 1500 mA, -12 V output at 1500 mA and +5 V output at 500 mA.

Notes: Super-versatile quad envelope generator and LFO source from the Vancouver Eurorack brand. All CV controllable and with tons of shaping options.

Supplier's notes:
The Intellijel Quadrax consists of four independent, CV-controllable channels, each of which can be configured to perform any one of the following functions:

- An AD (Attack, Decay) envelope
- An AHR (Attack, Hold, Release) envelope
- A cycling envelope (resulting in a unipolar LFO)
- A pulse burst generator (Finite repeated functions that ascend or descend in amplitude)
- A morphing, bipolar beat syncable LFO

The envelopes all feature a continuously variable response curve, ranging from logarithmic through linear to exponential, and each stage can be as snappy as 0.3 ms to as lengthy as 20 seconds.

When set to Burst mode, the channel generates a rising or falling burst of pulses, with full control over the length of the pulse burst, the number and shape of the bursts within it, and whether the bursts increase or decrease in amplitude over the burst.

AD, AHR, Cycling and Burst modes all feature a user-selectable maximum output level of either 5V or 10V.

LFO mode offers control over the frequency and waveshape, while providing a unique morphing feature that creates numerous variations of the selected waveshape. LFOs can be either free-running or beat-synchronized using the channel's TRIG input.

Channels can be chained together to create complex multi-stage envelopes, with each channel triggered by the previous channel's trigger input, end-of-rise, or end-of-fall. This enables multiple function generators to fire simultaneously, or it enables the creation of complex multi-stage envelopes by allowing the linked function to fire either at the end of the previous function's rise time, or at the end of its fall time.

Four freely-assignable, step-attenuverted CV inputs are capable of modulating any or all of the various parameters across all four channels using the built-in CV matrix, and built-in attenuversion for each assignment.

Quadrax remembers its current state (Mode and CV assignments, channel links, etc) and retains that state even if power is removed, meaning Quadrax will always turn on in exactly the same state as you last left it.

Notes: ***B-STOCK: Box opened, product in excellent condition, no original internal packaging***


Intellijel has made the already awesome Thru Zero VCO Rubicon even better! In addition to the seven waveforms plus sub-oscillator of the first version, the second generation offers a new Warp stage, which generates a hybrid of complex pulse and other waves - you can even use external audio material. In order to keep results in the range of 10 Vpp, there is a wave folder called Squish. On top, the FM capabilities were expanded.

Notes: Multi-model stereo delay with reverb, featuring tape, bucket brigade and crossfading digital models, plus saturation, filters, internal modulation plus tons of CV control. Vibey as hell.

Supplier's Notes:
It's all gone a bit wobbly

Intellijel's design goal for Sealegs was to create the warmest, most musical and organic delay module possible - something that would sweeten and enhance any audio one chose to feed into it. As such, great care has gone into modelling the most distinctive and desirable sonic characteristics of three different types of delay circuits: Tape; Bucket Brigade, and Crossfading Digital.

A plethora of onboard controls enable you to dial in exactly the sound you want; synced or un-synced delays times (for both left and right channels); a built-in modulator with seven morphing waveshapes, a Wow & Flutter emulation, and an envelope follower; plus dedicated low- and high-pass filters; built-in hiss & crackle noises; per-model colour controls; a spacious reverb; and a re-configurable signal flow through the unit. In addition, attenuverted modulation inputs abound - ensuring the delay ebbs and flows with your musical needs.

Features
Three Unique delay models with per-model "Color", modulation behaviour, and saturation/limiting
Three Stereo configurations (PONG, L/R, Time/Width)
Built-in modulator with multiple, morphing wave shapes
Lush, routable 1970s-inspired reverb
Noise control to introduce hiss and crackle.
Highpass and lowpass filters for filtered repeats
Input drive with level trim
Per-model Freeze functionality for holding the delay contents and looping
Delay times up to 6 sec (L channel) and 8 sec (R channel, Width adds 33% to Time)
9 CV inputs (with attenuverters)
Stable external clock syncing (or tap tempo)
96 kHz, 32-bit stereo floating point processing

Size: 20HP
Depth: 29mm
Power: 116mA @ +12V 10mA @ -12V

Notes: Killer physical modelling module collab from two of the biggest names in their respective fields of hardware and software. Generates a huge range of percussion instruments plus synths and bass tones.

Supplier's notes:
Plonk uses a technique known as physical modelling to synthesize, with great realism, the way in which sound is produced by acoustic instruments. The Plonk module is, itself, focused primarily on creating percussive sounds - both pitched and un-pitched; natural and unnatural; acoustic-sounding or totally electronic.

Plonk does this by breaking sound creation into two distinct elements - the exciter and the resonator. The exciter is a mathematical model of the device used to strike a particular surface. Plonk, because it's percussion oriented, has two types of exciters: one modelled on a mallet, and the other providing a noise source. The resonator is a virtualization of the object being struck, which vibrates, resonates and creates the body of a sound. Plonk offers several types of resonators: beam; marimba; drumhead; membrane; plate; and string.

Plonk provides numerous parameters that let you shape, mould and design both the exciter and the resonator, thus enabling you to synthesize the sound of striking or scraping almost any type of object - real or imagined. In this way, Plonk can accurately model the sounds of kicks, snares, toms, cymbals, claps, tablas, congas and all manner of traditional percussion instruments. It can also model pitched percussive instruments, like vibes, marimbas, and even bass or guitar-like tones. Of course, it additionally excels at modelling instruments that heretofore never existed.

Best of all, the sounds created by Plonk are not static - any sound you design can respond dynamically to velocity, as well as four different modulation inputs. This means the sound of Plonk can change completely from note-to-note (or strike-to-strike). Because of this, Plonk is actually a duophonic (2-voice) module, which lets the sound of one note decay naturally when a second note (possibly employing an entirely different set of modelling values) is struck. Thus, hitting a new note does not choke the sound of the previously struck note (unless you want it to, of course)!

Plonk stores up to 128 patches in its internal memory, and ships with many presets programmed by professional sound designers and composers. You may overwrite these patches if you wish, and banks of patches may be transferred via MIDI System Exclusive over Plonk's built-in mini-USB port to facilitate offline storage by programs or websites that support this capability.

Plonk was developed in cooperation with Montreal-based Applied Acoustics Systems - physical modelling pioneers, and the creators of Tassman, Lounge Lizard, String Studio, Ultra Analog, Chromaphone and numerous other plugins. It is with great pleasure that Intellijel brings the potential of this physical modelling technology to a hands-on, CV-laden device capable of the sort of dynamic control and sonic exploration that modular synthesists demand.

Notes: Jomox's legendary analogue kick drum prowess distilled into Eurorack form. Hugely versatile sound with plenty of CV control on the front panel, plus MIDI via DIN sockets hidden round the back.

Supplier's Notes:
The mightiest Bass Drum - MK II

Tune Varies the pitch envelope of the VCO

Pitch Basses as low as 10Hz reach up to 175Hz

Decay Up to 2 sec

Harmonics Enrichment of harmonics of the VCO - for the hardest kick drums on planet earth

Pulse Change of the pure pulse part of the attack - gate time affects this parameter also

Noise Change of the pure noise part of the attack - gate time affects this parameter also

Attack Level of the mixing of Pulse and Attack

EQ Filters the bass drum with a low pass filter - for soft and 808ish kick drums

Gate T Varies the gate time from 0.1ms to 16ms

Compr Compression of decaying envelope - for slim and clicky kicks and all the depth that is needed

MetNze Metalized noise. A complex digital multitone pattern of 499 different combinations feeds the attack noise

CV1-CV4 can route the external 0-5V CV signals to any of the above parameters including LFOs. Also negative amounts are processed.

LIN.FM This is a true analog dedicated CV FM modulation input for the bass drum VCO. It only works linear-wise and does not offer musical semitones across the CV scale.

ACC This is a CV input for the kick drum accent / velocity. This input may also trigger the kick drum dynamically if the ACC trigger mode is set and the sequencer is able to generate dynamic pulses.

LFO The ModBase 09 has 2 LFOs that work on the pitch of the bass drum. The LFO always starts syncronous to the gate trigger.

The wave forms are: saw up, saw down, sine+/-, triangle+/-, rectangle+/- and portions of it.

MIDI The midi controllers of this module are identical to the Alpha Base/XBASE999/MBase11. All parameters including LFOs can be remotely controlled by Midi CCs.

Bus Env Is the programmable level of the audio out signal from the bus on the back mixed to the Kick Drum VCA envelope. Works with experimental Jayemsonic modules.

140 mA +12V
80 mA -12V
0 mA 5V
53 mm deep

Notes: A multi-VCA module on steroids, the Morph 4 is designed as a modulation hub for an entire Eurorack system, capable of working in coutnless different ways. Proper versatile business.

Supplier's Notes:
Modulation is the core concept of modular synthesis: parameters changing over time, adding movement and musical interest to what would otherwise be merely static sounds. Being able to control the amplitude of signals throughout a patch is therefore essential, and one can never have too many voltage controlled amplifiers (VCAs).

Designed as a fully-featured modulation hub for Eurorack synthesisers, Morph 4 takes the basic concept of the multi-VCA module to the next level.

Four linear amplitude modulators are controlled by a master 'morph' parameter. The response of each modulator to this parameter is completely variable, both manually and under voltage control, and can be overridden if desired. Each response is triangular, with the 'position' parameter setting the maximum point along the morph axis, while 'span' determines the width of the triangle's base.

In addition to separate signal inputs and outputs, a variety of combined outputs is available as well: A+B, C+D, add (unity gain) and averaging mixes, and instantaneous minimum and maximum. Input normalisation makes it easy to send the same signal to multiple modulators, while output and modulator response LEDs provide essential visual feedback.

The combination of master control, fully flexible modulators and multiple combined outputs creates a module truly embodying the spirit of 'patch programmable' modular synthesis. Use Morph 4 as a voltage controlled mixer, dual crossfader, dual panner, interpolating scanner, interpolating distributor, quad VCA, quadraphonic controller, slope modifier, rectifier, complex waveshaper or something in between any of those- the choice is yours.

Notes: Fire-themed version of the expressive J-Play Pack from Joue. Based around the idea of making music more organic and natural, the Play Pads transform the J-Play's behaviour, allowing you to control and perform in a range of ways.

Supplier's Notes:
The J-Play transforms your musical experience with a complete system combining an expressive multi-instrument, an intuitive application and interactive content to practice.

A unique playing experience

The J-Play instrument merges the quality of traditional musical instruments with the technology of the digital world. It is sensitive to natural gestures for unparalleled expressivity. It is also a modular instrument, once placed on the J-Play Board, the interchangeable Play Pads instantly transform the instrument into a guitar, keyboard, drums, xylophone or vocal effects station. Each pad has its own bank of instruments. Explore different musical styles and experiment with new sounds thanks to the integrated effects!

With you, everywhere you go, the design of the J-Play has been thought out to adapt to all playing styles. Compact and lightweight, it slips easily into a backpack and follows you on the go. Don't let any musical idea slip away!

Intuitive & powerful app

Create, modify and share your songs in an intuitive way thanks to the included application. No need to spend hours on overly complex music software anymore, the Joue Play application guides you step by step through the process of creating music to make it intuitive. The app has been designed as a simplified music creation software: making music is easy and fun!

The Joue Play app is freely available for Windows, macOS, iPadOS and very soon for iPhone (before end of 2023).

Exclusive content

Practice at your own pace and recreate your favourite songs: each week, a new playable cover track is added to the large collection of well-known covers already available in the J-app. Replay the rhythms of your favourite artists, and get creative by remixing them. Change the sounds, the tempo or add your own rhythms!

Grow with it

The perfect instrument for beginners, a great first step into digital music making for musicians but also a powerful MPE MIDI controller for advanced music producers. The J-Play will always suit your style in accordance with your skills and needs. Discover a whole new way to control your software. Combine all your controllers into one device that will always be at hand in your studio or on stage.

1 wooden board
5 Play Pads (Fire): guitar, piano, drum, audio, keys
USB-C to USB-C cable
Storage bag
J-App included with dedicated tutorials and sound banks

(!) If you want to use your J-Play with an iPad, make sure the port type. USB-C to lightning adapters are available as accessories.

Notes: Jürgen Haible's legendary redesign of the Tau "The Pipe" Phaser has now (and for the first time ever) been adapted to Eurorack format. The 2021 version is a new, skiff-friedly design. It includes some additions and modifications compared to the original Haible version like Extended CV control: -1V/Oct and an attenuverting CV input.

Some details of the Haible TAU Pipe phaser module:

Faithful adaption of Jürgen Haible's design
Uses crazy caps for sonic performance.
Eurorack (3U) format, 18 hp
Skiff-friendly: < 30mm deep
Power: appr. 45mA @ +12V and 40mA @ -12V

Notes: The Haible VC Resonator is an evolution of Jurgen Haible's Resonator which was inspired by the Polymoog Resonator. As Jurgen stated: The Polymoog, an early polyphonic synthesizer, featured a 3-band "Resonator" section that allows Formant-Filtering in addition to its dynamic Filters. Such a Resonator is a very useful feature for analogue synthesizers. Each of the three (now overlapping) filter bands has a control for frequency, signal gain, and emphasis (resonance). The VC Resonator now not only adds VC control for each band, but also extends the ranges whithin which each frequency band can be set - adjacent bands can now overlap or even cross over, for instance the LOW and MED bands can now be set (or moved!) so that the LOW center frequency is higher than the MED frequency.

Jurgen's original Resonator (like the Polymoog) had a switch to select one of 3 basic modes, i.e. only one mode could be used at a time. The Haible VC Resonator now provids the same 3 modes as separate outputs so they can be used simultanously, e.g. for further processing like crossfading.

Some details of the Haible VC Resonator:

Evolution of Jurgen Haible's design
Added Voltage Control for Filter bands
Extended range of each band (overlapping)
Three separate outputs
Burr-Brown op-amps and high-end VCAs
Eurorack (3U) format, 18 hp
Skiff-friendly: < 30mm deep
Power: appr. 60mA @ +12V and 60mA @ -12V

Notes: Stylish and compact speakers with powerful 200-watt amplifier built in. Impressive 50 Hz - 20 kHz frequency response courtesy of 5.25-inch kevlar woofer and 1-inch silk dome tweeter.

Supplier's Notes:
Satisfy your craving for powerful, full-impact sound with YU6. Armed with a formidable Class D amplifier pumping out 200-Watt peak power, YU6 will have you questioning what it really means to be loud. Its 5.25-inch Kevlarr drivers and 1-inch silk dome tweeters inject detailed sound into every square inch of living space, evoking emotions that can only be expressed with an ear-to-ear grin.

High-performance materials. Exceptional sound.
YU6's 1-inch tweeters are made from silk to deliver a high-frequency range that is bright and refined. Their dome shape improves sound dispersion to ensure your ears capture every sound, regardless of where you are in the room.

Unmatched connectivity.
Inspired by an equal appreciation for digital and analog, YU6 gives you the freedom to enjoy all your devices. Connect a turntable via a built-in phono preamp, transmit high fidelity audio from your computer or TV with Optical TOSLINK, or sit back and enjoy your newly curated playlist with Bluetooth 4.0. With five inputs and a subwoofer output, YU6 brings all your sound to life.

Throw on your favorite record.
YU6 comes equipped with a built-in phono preamp, allowing you to easily connect any vintage or modern-day turntable. Toggle between line-level and phono with a simple flip of a switch, and reduce noise using the provided ground terminal.

Play tunes from the palm of your hand.
Featuring integrated Bluetooth 4.0 with Qualcommr aptX technology, YU6 lets you stream high-quality audio directly from any Bluetooth-enabled device. Sit back and enjoy your carefully curated playlist from anywhere in the room.

Upgrade your desktop setup.
Take your desktop setup to the next level by connecting YU6 to your computer via the RCA, AUX or Optical TOSLINK inputs.

To reduce vibration and improve soundstaging, use YU6 with SP6HD desktop speaker stands.

Bring your movies to life.
Enhance any cinematic experience with high-fidelity sound by connecting YU6 to your TV via one of two optical TOSLINK inputs.

To ensure your speakers remain stable and properly positioned, place them on SP floor stands.

Take control of your sound.
Packed with functionality, the YU series remote makes listening to audio more convenient. Quickly switch between sources, tune your sound to fit your space, and control playback while streaming via Bluetooth.

Never miss a beat.
Automatic standby and power-up mode conserves power when you're away and continues playback when your music starts playing.

Use the provided USB charging port to conveniently power your phone, smart home or casting device directly through your speakers.

DRIVERS
1" Silk Dome Tweeters
5.25" Kevlarr Drivers

AUDIO
Class D Amplifier
200W Peak Power (100 Watts Total RMS)
Frequency Response: 50 Hz - 20 kHz

INPUTS
3.5mm mini-jack AUX
RCA with Phono Switch
2 x Optical (TOSLINK)
Bluetooth 4.0 with Qualcommr aptX

OUTPUTS
Subwoofer
USB Charge 5V 1A

WHAT'S IN THE BOX
Remote with Batteries
Power Cord
Speaker Wire (16")
3.5mm Auxiliary Cable (6.5")
8 x Rubber Feet
Manual

WEIGHTS & MEASUREMENTS
Dimensions (each speaker):
6.9" W x 8.1" D x 10.7" H (17.5 x 20.5 x 27.2 cm)
Net Weight (active): 11.4 lb (5.2 kg)
Net Weight (passive): 8.7 lb (4.0 kg)
1/4"-20 Threaded Mounting Hole

Notes: Mûmack is built from a temperature-stabilized analog source producing the three classic waveforms: triangle, saw, rectangle. This basic signal can be altered or enriched in several ways, which can be combined with each other, and associated with one VCA per mode.

Peak Compressor:
In the central position the signal is not modified. Turning the potentiometer to the right or to the left will compress the signal positively or negatively. It is this signal that will then feed Usual, Mûm and Hack. An LFO is dedicated to the compressor, controllable in speed and amplitude. A CV input with attenuator can also control the compressor.

USUAL:
The three waveforms are freely mixable, a CV input and a potentiometer can change the shape of the rectangle wave (PWM). The compressor intervening upstream, it can strongly influence the final form and the amplitude of USUAL. This produces complex analog waveforms, moving in time with the LFO or the CV input. The linear potentiometer makes it possible to mix the signal with the others, and to dose the volume of the direct output. The rotary potentiometer acts as an attenuator for the VCA input.

MÛM:
The Waveform potentiometer move the waveform of Mûm continuously from a attenuated triangle to a more pronounced triangle, then to a sinusoid and finally to a square wave. An LFO allows you to add a vibrato adjustable in speed and amplitude. The linear potentiometer makes it possible to mix the signal with the others, and to dose the volume of the direct output. The rotary potentiometer acts as an attenuator for the VCA input.

HACK:
Mûm's signal is taken up in a Wavefolder + compressor. Depending on the settings of the Peak compressor, and the three LFOs, we obtain complex, moving, organic waveforms. Again the linear potentiometer allows to mix the signal with the others, and to adjust the volume of the direct output. The rotary potentiometer acts as an attenuator for the VCA input.

ALL:
The three channel (Usual, Mûm, Hack) are mixed and brought together in a single output. The output volume is adjustable and a CV input with attenuator works like a VCA.

MIXER & VCA
The voltages produced by Mûmack, as is the case with many analog VCOs, can be high. The mixer allows them to be attenuated if necessary. Each of the three channels, and the product of the three, can be controlled by the VCA, with attenuator. The VCA is designed to add distortion at high values. The mixer is exponential for more subtle adjustments in low values.

Dimensions
30 HP
40 mm deep

Current Draw
155 mA +12V
155 mA -12V
0 mA 5V

Notes: Skippy is a matrix and non-matrix polyrhythmic sequencer (linear and logarithmic) which offers four completely independent tracks with a very simple interface: one button per track, one function per screen, no sub-menus.

Possible saving of 64 configurations.

Internal connection with expander module (coming soon) and with Zazou, generative composition module (coming end of 2023).

Functions per track

- BPM (10 to 400)
- Number of steps (1 to 64)
- Linear or log
- Random function
- Chaotic function
- Direction: clockwise, counterclockwise, ping-pong, pause
- Number of steps before the start of the sequence
- Number of steps before the end of the sequence
- Gate duration

Specific algorithms

- Euclidean (Bjorklund)
- Matrix Patterns
- microtiming patterns
- matrix rotation

Clock

- External clock input or Reset
- Clock output
- 1/1, 1/4, etc.

Menus

- BPM
- STEP
- BEGIN
- END
- GATES
- PROBA
- CHAOS
- WAY
- SWING
- GAUSS
- EUCLID
- TILES
- POLYR
- JAZZY
- SPIN
- PAUSE
- RESET
- SYS: save, load, new, clk/rst, clk

Tech Specs

Width: 10 HP
Depth: 32 mm

Current Draw:
+12 V 0 mA
-12 V 0 mA

Notes: Perfect for use with Ableton Live and Traktor, the Killamix-Mini is a compact USB controller housed in a sturdy brushed aluminium case with solid aluminium knobs. It is the perfect companion to your laptop, whether you are using a sequencer, DJ-ing or VJ-ing, just plug in the USB cable and go. Despite having only 9 knobs, 9 buttons and a joystick, the Killamix-Mini can in effect be 144 knobs,144 buttons and a joystick.

By pressing a single knob you can select any MIDI transmit channel from 1 to 9, or, with a combination of two knobs, select the remaining channels 10 to 16. When you select a new MIDI channel, the current values of the knobs for that channel are stored so that they can be restored when you next select this channel, thus avoiding any parameter jump difficulties typical of units with traditional knobs and faders.

When the values are restored, the LED rings around the knobs indicate their new positions.

Review: Recorded over three nights at the iconic Red Rocks Amphitheatre in Morrison, Colorado, endlessly prolific Aussie psych-rock auteurs King Gizzard & The Lizard Wizard invite you to experience their intense live shows in the closest manner to being there in person and the only way they know how (with an absurdly massive 12xLP self-proclaimed bootleg collection). Taken from performances on Oct 10th, Oct 11th and Nov 2nd of last year, these 80+ cuts run the gamut through the collective's heaviest, softest, most direct and ludicrously impenetrable sonic meanderings, whilst wrapped in individual sleeves with an accompanying photo journal of their great takeover of the Colorado plains.

Notes: After years of development work, ENDGAME is KMA Machine's most ambitious creation to date. A highly flexible and comprehensive solution for the end of your signal chain, ENDGAME is a superb problem solver and a convenient creative companion.

Talk about feature packed! With an integrated Stereo FX loop, KMA's proprietary True Double-Tracker doubler and own DUAL IR cab with power amp simulation, an Aux Input (also via Bluetooth), real pro-level XLR outputs and extensive routing options, ENDGAME really is a powerhouse for your board, whether touring as a fly rig or practicing at home with headphones.

And now, you can finally use all your stereo devices with just one easy to use and compact product - let the alchemy begin!

It's no secret that over the past few years stereo pedals have become a huge part of many musician's rigs. While many regular tones can (and should) be mono, KMA are very much fond of stereo effects. But why is it so hard to use them either at home or on the stage? Without the luxury of 2 amps (plus the ability to turn them up if you have them) or for owners of cab/amp simulators that are usually mono input by design, monitoring stereo effects properly can end up being so difficult that many just end up running their stereo effects in mono and therefore lose many of their spatial creativity nuances.

Doubling guitars in recording is also a common practice in a variety of musical styles. In many cases, a single guitarist will record the same track twice with each separate recording being spread to the left and right channels. The effect of this is unmistakable to the ear and the slight differences and nuances between the two separate performances complement each other to create a noticeable thickness, density and weight to the musical experience. This is hard to get sounding right live too. Note this is not the same thing as simple doublers (that just delay one signal with a modulation) or ADT type solutions that are on the market today.

So, KMA developed ENDGAME. KMA wanted to make an easy-to-use product that gives the essentials of good tone, nothing more and nothing less. While from the front panel it might look like ENDGAME has lots of controls, compared to many hidden menus and screens in many other products, all means that it is also deceptively simple to use, despite the huge complexity of what's going on inside!

Stereo FX Loop

A Stereo FX Loop isn't a new thing, but in ENDGAME's case it is probably one of the most usable, making this a killer feature!

For maximum flexibility, the serial loop features routing that can exist either before or after the IR loader and/ or Doubler (when active). Buffered for the sake of long cable runs and to maximise signal clarity, you can now hear your stereo pedals and other effects in their true pristine glory! Plus, you can quickly switch the loop on or off via the convenient soft footswitch.

True Double Tracker

Whether playing live or recording with a single instrument, the KMA ENDGAME's True Double Tracker provides the perfect solution for adding a "fatness" and "width" to your performances and really feels like you are playing the same riff twice!

Enabled via the footswitch, the doubler accurately replicates the minor differences that could exist within two separate recordings and the width control can spread your doubled tracks anywhere from completely centred (0%) to 50% left and right (centre indent) and 100% left and right split.

Notes: Another clever one from Knobula, this chord-based sequencer/arpeggiator adds versatile harmonic options to your creative process. Pair it with the Poly Cinematic module for best results.

Supplier's Notes:
Generate extraordinary chords without using a keyboard.

Chord Pilot introduces a whole new take on the task of chord creation and performance offering 192 chord memories, a strummer, an arpeggiator and an 8 step chord progression sequencer, all in one compact 12hp package.

Knobula have thrown away the music theory rule book and instead offer a module that encourages the curious mind to discover alternative musical pathways, whether for generative patches or for EDM riffs.

To generate a new chord, Chord Pilot uses a series of controls that alter the width and spread of 'fingers' over a virtual keyboard before conforming them into a variety of musical moods from the pure and harmonious to the terrifying and cacaphonic.

Like all Knobula products, Chord Pilot has been designed primarily with performance in mind, to inpsire by experimentation, to lose yourself in the moment, and to occassionaly generate impossibly hard to play super chords.

With the ability to store and transfer chords in sets of eight, Chord Pilot makes a great companion module for Poly Cinematic, but it is equally at home serving any poly synth with a midi input.

Discover Chord Pilot, your guide, navigator and explorer to a whole new universe of musical harmony, and beyond.

Notes: Combining the power of multi-oscillator wavetable synthesis with the percussive detail of sampled sounds, Pianophonic is a powerful hybrid synth engine featuring 8 voices of polyphony. Not limited to Piano sounds, the voice architecture of Pianophonic is extremely versatile and easy to use with the essential controls laid bare on the front panel, and the most significant CV inputs and outputs provided for full integration within eurorack patches.

Taking its inspiration from the wavetable/sampler keyboards of the 90s, Pianophonic revisits a lean and mean approach to digital sound creation but instead with 24bit 48Khz quality and fingertip control of the parameters that really matter.

With a built in SD card and an online re-synthesise utility, allowing users to create their own sound banks, the possibilities for sound exploration are limitless.

Notes: This new device is a powerful new CV controlled effects unit for your electronic music setup and pairs extremely well with the KOMA Field Kit.

- Looper
- Frequency Shifter
- Sample Rate Reducer/Bitcrusher
- Digital Delay
- Analogue Spring Reverb
- 4 Channel VCA Mixer
- 4 Step Mini Sequencer
- Envelope Generator

All of this, combined with the new 4 Channel CV Interface which allows you to route four CV signals throughout the device, means an incredible control over sound and timbre and a great addition to your mobile performance rig.

The Field Kit FX is built up from 7 separate functional blocks all focused on mangling and changing incoming audio and CV signals. They are designed to operate together as a coherent addition to our Field Kit Electroacoustic Workstation or alternatively together with other pieces of music electronics with the ability to use control voltage signals.

Notes: This new device is a powerful new CV controlled effects unit for your electronic music setup and pairs extremely well with the KOMA Field Kit.

- Looper
- Frequency Shifter
- Sample Rate Reducer/Bitcrusher
- Digital Delay
- Analogue Spring Reverb
- 4 Channel VCA Mixer
- 4 Step Mini Sequencer
- Envelope Generator

All of this, combined with the new 4 Channel CV Interface which allows you to route four CV signals throughout the device, means an incredible control over sound and timbre and a great addition to your mobile performance rig.

The Field Kit FX is built up from 7 separate functional blocks all focused on mangling and changing incoming audio and CV signals. They are designed to operate together as a coherent addition to our Field Kit Electroacoustic Workstation or alternatively together with other pieces of music electronics with the ability to use control voltage signals.

Notes: The best of both worlds, combining analogue drum circuits with samples and Korg's Multi Engine. Versatile step sequencing, built-in effects and seamless connectivity.

Supplier's Notes:
The introduction of Drumlogue marks a paradigm shift for drum machines. It combines the rich and raw power of analogue, the flexibility and convenience of digital, and the deep customisation of a unique SDK. A heavy-duty dynamic sequencer, powerful effects, and intuitive controls make Drumlogue a must-have in any setup.

The power of analogue

Drumlogue features completely new analogue circuitry from legendary Korg engineer: Junichi Ikeuchi (ARP 2600 M, MS-20 Mini, ARP Odyssey). The depth and richness of its sound is on a whole new level. New analogue circuits for bass drum, snare drum, low tom and high tom provide a solid foundation, and elevate tracks with harmonic richness and a thick low end.

The versaility of digital

Drumlogue has 7 digital parts: 6 sample-based and 1 Multi Engine based. The sample-based parts can play a wide selection of pre-loaded PCM samples alongside imported user samples. These can be easily loaded into Drumlogue by connecting to a computer via USB and simply dragging and dropping into its main memory.

Endless creative potential

The wildly popular Multi Engine from Minilogue XD is made even more powerful: in addition to Variable Phase Modulation (VPM) and Noise generator engines, the Multi Engine in Drumlogue features a new user slot able to play fully-fledged synth voices - providing vast sonic possibilities never before heard on a drum machine.

Custom Synths

Synth voices in Drumlogue are so much more than static waveforms. Custom synths can be built to not only generate sound, but can also draw on built-in filters, LFOs, MIDI controlled polyphony

Exclusive "Nano" plugin

Korg has collaborated with popular plugin developer "Sinevibes" to create a brand new synth plugin for Drumlogue: Nano. This exclusive plugin explores the power behind the newly expanded Multi Engine and gives an incredible first taste of the platform.

"Nano" is a full-fledged virtual analogue synth with a broad array of features and customisable parameters. The synth engine has dual oscillators with optional ring modulation, a 4-pole state-variable filter with soft clipping distortion, built-in EG and built-in multi-waveform LFO.

Sequencing powerhouse

At the heart of Drumlogue is a flexible, easy-to-use, and extremely powerful 64-step sequencer. This makes it easy to create complex patterns and polyrhythms that elevates the music creation process. Innovative features are available including per-step probability, per-step alternate trigger patterns, per-step micro offsets, per-track groove patterns and much more. With the clear OLED display, it's also easy to follow and edit your sequences visually.

Chain mode makes creating long and interesting patterns simple. In loop mode you can switch between several variations to play sequences in new and interesting ways. The Motion and Accent recording functions are fast and intuitive, and if you want to try new things on your track, the randomisation function is there to help you.

Effects and customisation

Drumlogue has high-quality effects across three categories that can be used simultaneously: delay, reverb and master effects. The send amounts for delay and reverb effects are set independently, with multiple return points also available. Master effects add that final polish to the sound and can be bypassed on a per-part basis, meaning it's possible to send the effect to specific audio parts. A sidechain bus is also available to the master effects section.

Drumlogue has an audio input, so you can process other instruments through Drumlogue's effect chain, making it an ideal companion for your studio setup.

Connectivity

With a wide range of I/O, Drumlogue can be integrated seamlessly with your rig. A USB-A port supports connectivity with USB MIDI class-compliant devices, meaning volumes can be controlled with the faders on a nanoKONTROL 2, or sounds triggered by the pads on a nanoPAD 2.
It almost goes without saying that Drumlogue easily syncs with other gear via the MIDI in/out, sync in/out, or via USB MIDI.

Four individual outputs are available, in addition to headphone and main L/R. Any part can be assigned to any output, allowing for expanded routing versatility with external processing and multi-track integration.

Ease of use

Drumlogue is incredibly easy to use - having been designed with simplicity and accessibility in mind. The most important parameters for the main drum parts have dedicated knobs on the front panel for on-the-fly adjustments, as well as dedicated volume pots for each part to speed up the mixing process.

A wide and clear OLED screen coupled with a simple UI and 4 dedicated encoder knobs makes the navigation process fast and smooth.

Design

Unlike other drum machines, Drumlogue's main panel is slanted. This offers superior ergonomics and visibility, while a brushed aluminium body and wooden side panels add to the premium look and feel.

Specifications

Polyphony: 11 voices (*)
(*) User synths may be played polyphonically via MIDI, the actual voice count will depend on the synth's implementation

Sound Engine
Analogue:4
PCM / User samples: 6
Multi-engine(NOISE, VPM, User Synthesizer): 1

Number of Programs (including rhythm patterns): 128 (64 preset programs by factory default)
Effects: Reverb, delay, master

Inputs / Outputs
Headphones
OUTPUT, (L/Mono, R/Audio, Out 1-4)
Sync In/Out
Audio In, MIDI In/Out
USB A (To Device) (Only for MIDI controllers)
USB B (To Host)

Power supply: AC adapter (DC9V)
Dimensions (W × D × H): 317 × 189 × 73 mm/12.48" × 7.44" × 2.87"
Weight: 1.4 kg/3.09 lbs.
Included items: AC adapter, Precautions, Quick Start Guide

Notes: ***B-STOCK: Box opened, but product is in excellent condition and in perfect working order***


The best of both worlds, combining analogue drum circuits with samples and Korg's Multi Engine. Versatile step sequencing, built-in effects and seamless connectivity.

Supplier's Notes:
The introduction of Drumlogue marks a paradigm shift for drum machines. It combines the rich and raw power of analogue, the flexibility and convenience of digital, and the deep customisation of a unique SDK. A heavy-duty dynamic sequencer, powerful effects, and intuitive controls make Drumlogue a must-have in any setup.

The power of analogue

Drumlogue features completely new analogue circuitry from legendary Korg engineer: Junichi Ikeuchi (ARP 2600 M, MS-20 Mini, ARP Odyssey). The depth and richness of its sound is on a whole new level. New analogue circuits for bass drum, snare drum, low tom and high tom provide a solid foundation, and elevate tracks with harmonic richness and a thick low end.

The versaility of digital

Drumlogue has 7 digital parts: 6 sample-based and 1 Multi Engine based. The sample-based parts can play a wide selection of pre-loaded PCM samples alongside imported user samples. These can be easily loaded into Drumlogue by connecting to a computer via USB and simply dragging and dropping into its main memory.

Endless creative potential

The wildly popular Multi Engine from Minilogue XD is made even more powerful: in addition to Variable Phase Modulation (VPM) and Noise generator engines, the Multi Engine in Drumlogue features a new user slot able to play fully-fledged synth voices - providing vast sonic possibilities never before heard on a drum machine.

Custom Synths

Synth voices in Drumlogue are so much more than static waveforms. Custom synths can be built to not only generate sound, but can also draw on built-in filters, LFOs, MIDI controlled polyphony

Exclusive "Nano" plugin

Korg has collaborated with popular plugin developer "Sinevibes" to create a brand new synth plugin for Drumlogue: Nano. This exclusive plugin explores the power behind the newly expanded Multi Engine and gives an incredible first taste of the platform.

"Nano" is a full-fledged virtual analogue synth with a broad array of features and customisable parameters. The synth engine has dual oscillators with optional ring modulation, a 4-pole state-variable filter with soft clipping distortion, built-in EG and built-in multi-waveform LFO.

Sequencing powerhouse

At the heart of Drumlogue is a flexible, easy-to-use, and extremely powerful 64-step sequencer. This makes it easy to create complex patterns and polyrhythms that elevates the music creation process. Innovative features are available including per-step probability, per-step alternate trigger patterns, per-step micro offsets, per-track groove patterns and much more. With the clear OLED display, it's also easy to follow and edit your sequences visually.

Chain mode makes creating long and interesting patterns simple. In loop mode you can switch between several variations to play sequences in new and interesting ways. The Motion and Accent recording functions are fast and intuitive, and if you want to try new things on your track, the randomisation function is there to help you.

Effects and customisation

Drumlogue has high-quality effects across three categories that can be used simultaneously: delay, reverb and master effects. The send amounts for delay and reverb effects are set independently, with multiple return points also available. Master effects add that final polish to the sound and can be bypassed on a per-part basis, meaning it's possible to send the effect to specific audio parts. A sidechain bus is also available to the master effects section.

Drumlogue has an audio input, so you can process other instruments through Drumlogue's effect chain, making it an ideal companion for your studio setup.

Connectivity

With a wide range of I/O, Drumlogue can be integrated seamlessly with your rig. A USB-A port supports connectivity with USB MIDI class-compliant devices, meaning volumes can be controlled with the faders on a nanoKONTROL 2, or sounds triggered by the pads on a nanoPAD 2.
It almost goes without saying that Drumlogue easily syncs with other gear via the MIDI in/out, sync in/out, or via USB MIDI.

Four individual outputs are available, in addition to headphone and main L/R. Any part can be assigned to any output, allowing for expanded routing versatility with external processing and multi-track integration.

Ease of use

Drumlogue is incredibly easy to use - having been designed with simplicity and accessibility in mind. The most important parameters for the main drum parts have dedicated knobs on the front panel for on-the-fly adjustments, as well as dedicated volume pots for each part to speed up the mixing process.

A wide and clear OLED screen coupled with a simple UI and 4 dedicated encoder knobs makes the navigation process fast and smooth.

Design

Unlike other drum machines, Drumlogue's main panel is slanted. This offers superior ergonomics and visibility, while a brushed aluminium body and wooden side panels add to the premium look and feel.

Specifications

Polyphony: 11 voices (*)
(*) User synths may be played polyphonically via MIDI, the actual voice count will depend on the synth's implementation

Sound Engine
Analogue:4
PCM / User samples: 6
Multi-engine(NOISE, VPM, User Synthesizer): 1

Number of Programs (including rhythm patterns): 128 (64 preset programs by factory default)
Effects: Reverb, delay, master

Inputs / Outputs
Headphones
OUTPUT, (L/Mono, R/Audio, Out 1-4)
Sync In/Out
Audio In, MIDI In/Out
USB A (To Device) (Only for MIDI controllers)
USB B (To Host)

Power supply: AC adapter (DC9V)
Dimensions (W × D × H): 317 × 189 × 73 mm/12.48" × 7.44" × 2.87"
Weight: 1.4 kg/3.09 lbs.
Included items: AC adapter, Precautions, Quick Start Guide

Notes: The fastest and most intuitive way to make beats.

A production machine that lets you create using a gigantic array of samples.

The Electribe sampler is a sample-based production machine that lets you construct beats at maximum speed. You can freely edit and resample using waveforms that you've loaded and preset samples. Modulation and effects can be controlled easily just by turning knobs on the top panel. In addition, a variety of input interfaces optimized for inputting rhythm, bass, or melody allow you to smoothly create sequences as fast as you can think.

The sequences that you create can then undergo additional evolution on stage or in your laptop. You can enjoy intuitive live performances that link various devices with the Electribe sampler, or utilize this capability for full-fledged music production by exporting sequence data to Ableton Live for detailed editing and final mixing.

The latest system version 2 adds a much-requested pattern chain function that will be a great asset for live performances or music production. The lineup has also become more colourful with the new metallic red model. And Korg have also provided bonus patterns that reveal even greater sonic potential.

Making your beat-making ideas rapidly take shape. It's the Electribe sampler; a sampler + sequencer that's thoroughly optimized for speed.

The Electribe sampler continues to evolve

A new metallic red model - a nod to the legacy of electribe

Following the dark black unit, the lineup has been joined by a metallic red model that's reminiscent of the previous model, the ELECTRIBE SX. Complemented by the numerous colourfully illuminated LEDs, this unit will energize your playing.

Many new functions added via system update

Updates make the Electribe sampler evolve daily. System version 2 adds support for the much-requested pattern chain function and undo function, as well as support for original value display. Users who already own an Electribe sampler can update their unit and then enjoy playing.

Download over 200 bonus patterns

Electribe artists, sound designers, and beat makers from around the world have created bonus pattern data packed with new sounds, phrases, and sequences. These 237 different patterns are packed with sample sounds, drum kits, and ideas for a wide range of musical styles. They are provided as reference materials for your beat-making or as foundations to give you new inspiration.

Specifications

Sound System
Type: PCM sound engine + Analog modelling sound engine

Maximum Polyphony
24 voices
* The polyphony of the entire pattern varies depending on the Oscillator, Filter, and Insert Fx type.
* Independent parameters for each voice have been simplified; four voices share the parameters of one conventional voice.
Sample: Type (920), Pitch/Glide, Edit
Sample Types: Analog (16), Audio In (2), Kick (37), Snare (44), Clap (12), HiHat (37), Cymbal (8), Hits (33), Shots (44), Voice (31), SE (7), FX (30), Tom (10), Percussion (31), Phrase (15), Loop (22), PCM (31), User Sample (499)
Filter: Filter (Cutoff), Resonance, EG Int, LPF/HPF/BPF (3)
Modulation: Type (72), Depth, Speed
Amp/Envelope Generator: Level, Pan, Attack, Decay/Release, Amp EG On/Off
Scale Types: 35
Gate Arpeggiator Types: 50
Sampling Frequency: 48 kHz
AD/DA Conversion: 24 bit

Sampler
User Samples: Up to 499 samples
Memory
Total maximum approximately 270 seconds (calculated as monaural)
* Regardless of the capacity of the SD card
* Including presets
Edits: Start/End Point, Loop Start Point, Tune, Time Slice, Level, Direction, Resampling

Effect
Insert Effect:One unit (can be used on each of the 16 parts)
Type (38), Edit, Insert FX On/Off

Master Effect:
One unit
Type (32), Touch Pad, Master FX On/Off, Master FX Hold On/Off
Sequencer
Number of Steps: 16 steps x 4
Number of Parts: 16 parts (one part consists of a sound, steps, insert effect, modulation sequence, etc)
Number of Patterns:
250 patterns (150 Presets / 100 Initial)
(one pattern consists of parts, master effect, key, scale setting, etc)
Motion Sequences: Up to 24 motion sequences can be stored (for each pattern)
Groove Types: 25
Pattern Set: Up to 64 patterns can be stored
Pattern Chain: Up to 250 patterns can be chained
Export: Ableton Live project file format, WAV file format (48 kHz, 16 bit)
Event Recording: Up to 100 files can be saved

Trigger Pads
Number of Pads: 16 pads (Velocity sensitive)
Modes: Trigger, Sequencer, Keyboard, Chord, Step Jump, Pattern Set, Touch Pad
Modes: Gate Arp, Touch Scale, Master FX

Connectors

Audio:
L/Mono, R Output (Standard phone jack)
Headphones (Stereo mini jack)
Audio Input (Stereo mini jack)

MIDI: In, Out (Use an included MIDI adapter cable)
USB: Type micro B
Sync:In, Out (Stereo mini jack)

External Storage Device: SD Card (512 MB -- 2 GB), SDHC Card (Up to 32 GB)

Power

Power Supply: AC adapter (DC 9V) or AA battery x 6 (Alkaline battery or Nickel metal hydride battery)
Battery Life: Approximately 5 hours (Power Saving: ON, with Nickel metal hydride battery)
Current Consumption: Less than 500 mA
Chassis: Zinc die cast

Dimensions (W x D x H): 339 x 189 x 45 mm / 13.35" x 7.44" x 1.77"
Weight: 1.6 kg / 3.53 lbs
Colour Variations: Metallic Red (electribe2s-RD), Black (electribe2s)
Included Items: AC adapter (DC9V), MIDI adapter cable x 2, Ableton Live 9 lite (License card included)
Accessories: Sync Cables SQ-CABLE-6, Gig Bag DJ-GB-1

Notes: Two decades in the game and the mighty MicroKorg remains a classic. Crystal version celebrates the anniversary with a fresh new look and the same punchy sound.

Supplier's Notes:
A shining homage to two decades of microKORG legacy

The microKORG was originally released in 2002 and has remained strong for two decades. Countless tracks and artists have made use of the amazing possibilities it offers and it continues to be one of the most popular choices for musicians on stage and in the studio.

The instruments that musicians recognise as "classics" are those that are loved and always in use, regardless of times and trends. The word "classic" symbolises musical instruments that are revolutionary in their field. There may be imitations of a classic, but the distinct character of the original shines more brilliantly and is only enhanced by time.

Two decades ago, the portable, battery powered microKORG was born with a radical new micro-keybed, a powerful Vocoder and ready-to-use sounds ideal for contemporary genres delivering countless hit performances, and instantly revolutionising the way musicians played. This compact sound monster introduced synthesis to a vast number of non-keyboard playing musicians and created a way of making music we now take for granted: a small keyboard resting unassumingly atop a larger one onstage, made for use by hobbyists and pros alike and finding itself front and centre of studios worldwide from the smallest bedroom to the largest pro recording facility.

To celebrate the 20th anniversary of its release, the special edition microKORG Crystal offers a unique and stunningly stylish take on this beloved synth - now a classic in its own right.

The microKORG was originally released in 2002 and has remained strong for two decades. Countless tracks and artists have made use of the amazing possibilities it offers and it continues to be one of the most popular choices for musicians on stage and in the studio. microKORG Crystal is the ultimate reincarnation of this iconic synth.

"Skeleton" type semi-translucent chassis, with matching knobs and controls

Previously unchanged, the microKORG Crystal features a new take on the structure of the microKORG, with a semi-translucent chassis that lets you see the electronics and internals. Even the controllers are semi-transparent, including the knobs, dials and wheels. As a commemorative model, the microKORG Crystal is great fun to look at from any angle, and as its name suggests, it "crystalizes" the energy and feelings of the KORG team behind its birth.

A panel with a beautiful sheen

The microKORG Crystal features a stainless mirror-finish front panel that blends perfectly with the semi-translucent knobs and dials, blurring the limits between you and your instrument and providing a cosmetic impact never seen in any other musical instrument.

Aluminium side panels for a sturdy feel

The original microKORG featured wooden side panels that suggested a retro feel, serving as an elegant accent to the analogue modelled synth engine. This new special microKORG features sleek aluminium side panels for a clean and depurated look.

Dedicated transparent carry bag

The microKORG Crystal features a stainless mirror-finish front panel that blends perfectly with the semi-translucent knobs and dials, blurring the limits between you and your instrument and providing a cosmetic impact never seen in any other musical instrument.

Specifications

Sound generation:
Analogue Modelling Synthesis System

Synthesizer program:
Multi Timbral: 2 (max, Split/Dual Mode)

Voices: 4 voices

Sound source:
2 Oscillator + Noise Generator
Multi Mode Filter (-24dB/octLPF,-12dB/oct LPF/BPF/HPF)
EG×2
LFO×2
Virtual Patch×4

Voices: 4 voices

Vocoder program

Voices: 4 voices

Sound source:
1 Oscillator +Noise Generator
EG×1
LFO×2 8
Channels vocoder
Level and pan of each channel can be edited
Formant Shift function

Programs: 128
Effects: Modulation effects (3 types), Delay (3 types), Equalizer
Arpeggiator: 6 types

Controllers
Real-Time control knob X 4 (3 level Selection),
Arpeggio ON/OFF

Keyboard: 37 Keys (mini-keyboard, keyboard has velocity)
Inputs: AUDIO IN 1,2, Level switch LINE/MIC, [AUDIO IN 1, 2 (LINE) ], [AUDIO IN 2 (MIC)]
Outputs: L/MONO, R, Headphones
MIDI : IN, OUT, THRU
Display : 3 characters×1 line with 8 segment LED
Power supply: DC 9V (AC adapter)
Power: 6.4w Max
Dimensions: 524 x 232 x 70mm
Weight: 2.4 kg (instrument only, without batteries or microphone)
Included items: AC adapter, condenser microphone, dedicated transparent carry bag

Notes: ***B-STOCK: Box opened, product in perfect working order***


Two decades in the game and the mighty MicroKorg remains a classic. Crystal version celebrates the anniversary with a fresh new look and the same punchy sound.

Supplier's Notes:
A shining homage to two decades of microKORG legacy

The microKORG was originally released in 2002 and has remained strong for two decades. Countless tracks and artists have made use of the amazing possibilities it offers and it continues to be one of the most popular choices for musicians on stage and in the studio.

The instruments that musicians recognise as "classics" are those that are loved and always in use, regardless of times and trends. The word "classic" symbolises musical instruments that are revolutionary in their field. There may be imitations of a classic, but the distinct character of the original shines more brilliantly and is only enhanced by time.

Two decades ago, the portable, battery powered microKORG was born with a radical new micro-keybed, a powerful Vocoder and ready-to-use sounds ideal for contemporary genres delivering countless hit performances, and instantly revolutionising the way musicians played. This compact sound monster introduced synthesis to a vast number of non-keyboard playing musicians and created a way of making music we now take for granted: a small keyboard resting unassumingly atop a larger one onstage, made for use by hobbyists and pros alike and finding itself front and centre of studios worldwide from the smallest bedroom to the largest pro recording facility.

To celebrate the 20th anniversary of its release, the special edition microKORG Crystal offers a unique and stunningly stylish take on this beloved synth - now a classic in its own right.

The microKORG was originally released in 2002 and has remained strong for two decades. Countless tracks and artists have made use of the amazing possibilities it offers and it continues to be one of the most popular choices for musicians on stage and in the studio. microKORG Crystal is the ultimate reincarnation of this iconic synth.

"Skeleton" type semi-translucent chassis, with matching knobs and controls

Previously unchanged, the microKORG Crystal features a new take on the structure of the microKORG, with a semi-translucent chassis that lets you see the electronics and internals. Even the controllers are semi-transparent, including the knobs, dials and wheels. As a commemorative model, the microKORG Crystal is great fun to look at from any angle, and as its name suggests, it "crystalizes" the energy and feelings of the KORG team behind its birth.

A panel with a beautiful sheen

The microKORG Crystal features a stainless mirror-finish front panel that blends perfectly with the semi-translucent knobs and dials, blurring the limits between you and your instrument and providing a cosmetic impact never seen in any other musical instrument.

Aluminium side panels for a sturdy feel

The original microKORG featured wooden side panels that suggested a retro feel, serving as an elegant accent to the analogue modelled synth engine. This new special microKORG features sleek aluminium side panels for a clean and depurated look.

Dedicated transparent carry bag

The microKORG Crystal features a stainless mirror-finish front panel that blends perfectly with the semi-translucent knobs and dials, blurring the limits between you and your instrument and providing a cosmetic impact never seen in any other musical instrument.

Specifications

Sound generation:
Analogue Modelling Synthesis System

Synthesizer program:
Multi Timbral: 2 (max, Split/Dual Mode)

Voices: 4 voices

Sound source:
2 Oscillator + Noise Generator
Multi Mode Filter (-24dB/octLPF,-12dB/oct LPF/BPF/HPF)
EG×2
LFO×2
Virtual Patch×4

Voices: 4 voices

Vocoder program

Voices: 4 voices

Sound source:
1 Oscillator +Noise Generator
EG×1
LFO×2 8
Channels vocoder
Level and pan of each channel can be edited
Formant Shift function

Programs: 128
Effects: Modulation effects (3 types), Delay (3 types), Equalizer
Arpeggiator: 6 types

Controllers
Real-Time control knob X 4 (3 level Selection),
Arpeggio ON/OFF

Keyboard: 37 Keys (mini-keyboard, keyboard has velocity)
Inputs: AUDIO IN 1,2, Level switch LINE/MIC, [AUDIO IN 1, 2 (LINE) ], [AUDIO IN 2 (MIC)]
Outputs: L/MONO, R, Headphones
MIDI : IN, OUT, THRU
Display : 3 characters×1 line with 8 segment LED
Power supply: DC 9V (AC adapter)
Power: 6.4w Max
Dimensions: 524 x 232 x 70mm
Weight: 2.4 kg (instrument only, without batteries or microphone)
Included items: AC adapter, condenser microphone, dedicated transparent carry bag

Notes: Vintage and more.

With its unmistakably unique exterior and its inimitable sound, the microKorg set the standard for analog modeling synthesizers. The year 2008 saw the introduction of the microKorg XL, which inherited the microKorg's fat and powerful sounds, while adding keyboard staples such as electric piano and the CX-3 organ. And now, in the next evolutionary step, the microKorg XL+ delivers a fresh update to the sounds and design of the microKorg XL, making it the ideal compact keyboard.

The microKORG XL featured a sound selector that lets you choose your sound using 2 large dials: music genre and instrument category. The new microKORG XL+ offers an additional selection of these music genres to fit today's fast-moving music scene. Now you can select a program that matches your song more intuitively than ever. For even more convenience, you can also leave one of the dials fixed and only use the other dial to make program changes during a song (music genre fixed), or use the dial to select vocoder variations (instrument category fixed).

Lush analog modeled synthesizer sounds that are characteristic of the microKORG have been freshly added to the microKORG XL+. In addition, for band use, the microKORG XL+ comes equipped with the piano sound from Korg's classic stage piano, the SGproX (famous for its ability to stand out in your band's mix), as well as its hard-edged grand-type electric piano. This compact package also includes sounds from the M1 and the VOX organ, vintage tape-type string and flute machines, as well as other gorgeous sounds from keyboard history. Each of these 128 programs are genuinely usable sounds, giving the microKORG XL+ plenty of variety to serve as your main keyboard or of course as a secondary keyboard in your rig.

The microKORG XL+ projects a style that's reminiscent of vintage electric pianos, featuring a futuristic yet retro design with a stylish black panel. High-quality parts such as metal levers, dials that move with an audible click, and knobs with a sturdy operating feel are some of the ways that the microKORG XL+ outclasses other instruments in its range and enhances your experience editing synthesizer sounds.

The microKORG XL+'s sound engine uses MMT (Multiple Modeling Technology), borrowing from Korg's well proven wealth of analog modeling technology. The MMT sound engine has been featured on numerous products, and provides 2 oscillators that generate huge powerful sounds. Oscillator 1 (OSC1) gives you a total of 7 types of oscillator algorithm to choose from, including formant waveforms such as human voice, and PCM/DWGS waveforms for vintage keyboard and strings. It also lets you use techniques that cannot be imitated on typical PCM synthesizers, such as cross modulation, unison, and VPM (Variable Phase Modulation). By taking advantage of modulation (sync or ring) with oscillator 2 (OSC2), it's easy to create complex and powerful sounds.

The microKORG XL+ can function as a powerful vocoder that lets you connect a mic and use its audio input to shape the tonal character of the oscillator's sound to create talking effects. The vocoder consists of a 16-band filter bank that can simulate the vocoder sounds of the past and also shift the filter frequencies (Format Shift function) or adjust the level and pan of each band to dramatically change the sonic character. Using the Vocoder is an easy way to add sounds that can be found in today's popular electronic music. Since a gooseneck microphone is included, you can immediately start using thevocoder in your songs.

2 master effects utilize the effect engine that was brought to perfection in Korg's Kaoss Pad series, giving you a total of 17 powerful effect types including delay and echo effects as well as dramatic effects such as ring modulator and grain shifter. In addition, effects such as delay can be synchronized to MIDI clock for a wide range of possibilities in live performance.

Notes: Killer value for money here. Korg's budget synth brings proper analogue polyphony to a crazy price point. Amazingly versatile with sound to match synths two or three times the price.

Supplier's notes:
Meet minilogue; the stylish, innovative, 37 slim-key fully programmable analog polyphonic synthesizer:
minilogue's newly developed analog synthesizer circuit delivers polyphony and full programmability at a great price --- exactly what today's musician needs. With the minilogue, you can get your hands on the powerful sound that's only possible with real analog, and find inspiration with features including a polyphonic step and motion sequencer, on board tape-style delay, multiple sound shaping and filter options, and an oscilloscope display. All of these seamlessly integrated features make minilogue as fun and easy to use as it is powerful. It's the next-generation analog synthesizer for musicians of all types.

True analog sound:
The synth circuits for minilogue are all new ground up designs, delivering a synthesizer experience like no other. Unprecedented in this class, it's a four-voice polyphonic true-analog synth with an interface that's designed for accessibility. Whether you're performing live or producing in the studio, the minilogue is the fastest way for the user to explore and implement real analog synthesis in any situation.
The structure consists of 2VCO, 1VCF, 2EG, 1VCA, and 1LFO. The minilogue's unique wave shape capability lets you fine tune the oscillators' harmonics, creating the most divine sounds and compositions. The minilogue is also equipped with a variety of powerful types of modulation including cross modulation, oscillator sync, and ring modulator, as well as a delay with a high-pass filter. Powerful sound creation and rich variety are the true hallmarks of an analog synthesizer.

Polyphony and Presets - Perfect:
minilogue goes beyond analog synths in its price range by adding 200 preset locations. Select a program for instant access to great sounds - - ranging from thick basses to deep pads to brilliant polyphonic leads and atmospheric sounds. No need to have deep synthesis knowledge; just choose a sound and tweak - a workflow that is very familiar with musicians today. For those who want to dive deeper into the heart and soul of minilogue's engine, the minilogue hold 200 programs; with 100 editable factory programs included, and 100 locations serving as blank canvases on which to create your next analog masterpiece. Each preset can also hold a step sequence and delay settings along with the sounds you create.

Voice modes:
Selectable voice modes let you freely configure the four voices for performance. The voices can be set to four note polyphony for chords or layered for thick basses and leads. Other modes cover a range of sounds from octave shifted bass explosions to delicately staggered layered triggering.

Eight voice modes:
- POLY - operates as a four-voice polyphonic synthesizer
- DUO - operates as a unison two-voice polyphonic synthesizer
- UNISON - operates as an all-unison mono synthesizer
- MONO - operates as a mono synth with sub-oscillator
- CHORD - produces chords
- DELAY - voices 2--4 sound consecutively at a delay following voice 1
- ARP - an arpeggiator operates with up to four voices
- SIDE CHAIN - when a note sounds, the volume of the preceding voice is lowered

16-step sequencer:
Get creative with the intuitive 16-step sequencer with motion sequence recording capabilities, and make your sound truly come to life. The minilogue provides real-time recording with overdubbing, and step recording that lets you record simply by consecutively specifying notes, giving you a great way to create phrases and performances.

Oscilloscope visualizes the sound:
The OLED display will show the waveform as you sculpt your sound. Visual feedback is both educational and entertaining, and represents a first on a hardware synthesizer.

Build quality:
The uniquely curved, sand-blasted 2mm aluminum front panel, metal shaft potentiometers, solid, chassis-mounted metal shaft potentiometers and rubber-coated knobs give the roadworthy minilogue a standout look and feel to complement its powerful and dynamic sound creation capabilities.

Sync with groove machine:
In addition to the standard MIDI connectors, the minilogue provides a sync connector that can be easily connected to Korg's groove machines. Connect this to a volca series unit, an electribe, or the SQ-1, and experience a session with synchronized sequencer playback.

Notes: Specially tuned for bass sounds, the Minilogue returns in this new format. Same great analogue synth architecture, updated to create a low-end monster.

Supplier's Notes:
Minilogue Bass is the evolution of the iconic Korg Minilogue into an all-analogue bass powerhouse.

An expandable poly-synth that retains the hands-on control and immersive playability of the original, Minilogue Bass drops deep, dark, thunderous low-end for cutting production-ready bass.

Production-ready bass

Minilogue Bass includes patches optimized by professional bass and synth programmers, ready to drop into your track or performance. But that's just the beginning - everything can be customised- the analogue possibilities are virtually endless.

All 100 preset patches are exclusive to Minilogue Bass, and can be further expanded with an additional 100 user programs for a total of 200 slots.
Powerfully analogue

The thickness, presence, and immense sonic palette provided by Minilogue Bass is due to an all-analogue signal path. It has two VCOs, a VCF, two EGs, a VCA and an LFO, while retaining the hands on control and unique wave shaping through oscillator harmonics from Minilogue.

Minilogue Bass includes cross modulation, oscillator sync, and a ring modulator, alongside a high pass filter delay to further expand your sound creation possibilities.

Eight voice modes

Minilogue Bass is a four-voice poly synth, with eight voice modes for broad versatility. Alongside POLY and CHORD modes, DUO stacks two voices in unison, UNISON works as a 4 part mono synth, MONO is monophonic but with a sub-oscillator playing an octave lower, DELAY plays 3 voices in sequence after the first, ARP is a 4 voice arpeggiator, and SIDE CHAIN lowers the volume of previously played notes.

16-step sequencing

Minilogue Bass offers powerful and intuitive sequencing possibilities. The 16-step polyphonic sequencer also captures the motion of up to four real-time controls, and can be overdubbed or step-sequenced, alongside the ability to change the root position of the playback by playing a key.

Overview

Sound visualisation

Minilogue Bass has an OLED oscilloscope that shows you the waveform as you sculpt your sound.

Sound librarian

The Minilogue Bass Sound Librarian allows for easy organisation of programs inside your synth, and can also save the entire library to a computer. It even gives the ability to load any existing Minilogue patches alongside factory and bonus libraries from Korg.

Solid looks

The sand-blasted 2mm aluminium front panel on Minilogue Bass features an edgy appearance, which is emphasised by the inverted black and red keys. A red-coloured wood rear panel further adds to a unique appearance.

Minilogue bass is also roadworthy - with metal shaft chassis-mounted potentiometers and rubber coated knobs complementing its powerful and dynamic sound creation possibilities.

In sync

Alongside MIDI and USB, Minilogue Bass has a sync connector for effortless connectivity with Volcas, Electribes and SQ-1 sequencer.

Specifications

Keyboard: 37-keys (Slim-key, velocity sensitive)
Sound Generation: Analog synthesis
Maximum Polyphony: 4 voices
Program

200 programs (100 Presets / 100 Users)
Each program includes voice mode and sequence data settings
Up to eight favorite programs can be registered
Voice Modes: 8 modes (Poly, Duo, Unison, Mono, Chord, Delay, Arp, Side Chain) -
VOICE MODE DEPTH can vary different parameters in each mode

Main Synthesis Parameter
VCO1: Octave, Wave (Saw, Triangle, Square), Pitch, Shape
VCO2: Octave, Wave (Saw, Triangle, Square), Pitch, Shape
VCO2 MODULATION: Cross Mod Depth, Pitch EG Int, Sync, Ring
MIXER: VCO1, VCO2, Noise
FILTER: Cutoff, Resonance, EG Int, Filter Type (2-Pole, 4-Pole), Keytrack, Velocity
AMP EG: Attack, Decay, Sustain, Release
EG: Attack, Decay, Sustain, Release
LFO: Wave (Saw, Triangle, Square), EG Mod (Int, Rate, Off), Rate, Int, Target (Pitch, Shape, Cutoff)
DELAY: Hi Pass Cutoff, Time, Feedback, Output Routing (Post Filter, Pre Filter, Bypass)

Sequencer
16-step polyphonic sequencer
Motion sequence can be used on up to four parameters

Controls
41 dedicated panel controls deliver immediate parameter access
A slider can control different parameters for each program

Display: Real-time OLED oscilloscope provides visual feedback of parameter changes
Connectors: Headphones (6.3mm stereo phone jack), Output (6.3mm monaural phone jack), Audio In (6.3mm monaural phone jack), Sync In (3.5mm monaural mini jack), Sync Out (3.5mm monaural mini jack), MIDI In, MIDI Out, USB Type B
Power Supply: AC adapter (DC9V)
Power Consumption: 8 W
Dimensions (W x D x H): 500 x 300 x 85 mm / 19.69" x 11.81" x 3.35"
Weight: 2.8 kg / 6.17 lbs.
Included Items: AC adapter

Notes: Stereo Field is one instrument with three uses. It is simultaneously a stereo/quad modular touch plate feedback atonal synthesizer, a stereo/quad audio processor and a pressure sensitive chaotic CV "controller". All three uses are available separately as well as simultaneously and in conversation with each other.

The Stereo Field allows its user to manipulate and patch two analogue stereo preamp circuits via touch plates. By utilizing skin conductivity as new paths for current to follow you are creating "new circuits" and new sounds in relation to where your fingers are patching. The individual touch plates are directly connected to nearly every connection point of every component in its circuitry (located directly under each corresponding touch plate).

When touched with multiple fingers it will create atonal analogue feedback with either of the two mirrored circuits represented by interlocking touch-plate circles. The resulting feedback can go beyond the abilities of human hearing (take caution!) and down to the very slow clicks of a saw waveform and both can often be happening simultaneously. These parallel mirrored circuits can be finger patched separately or together yielding vastly different chaotic results in regards to texture, timbre and stereo imaging. This instrument has the ability to create atonal synth tones in stereo (and quad) as well as process incoming stereo audio (and quad) sources via 1/4" and 3.5mm ins and outs. Incoming audio sources can be "patched" or rewoven into any area of either or both of the circuits via skin contact.

The two stereo input volume knobs (centre) shape and effect distortion, drive amounts, internal feedback pitch, and modulation rates depending on how your fingers are patching. The quad inputs and outputs via the 3.5mm jacks have small touch plates leading to and from allowing for touch access of each of the 4 inputs and 4 outputs. If multiple audio signals are traveling into the Stereo Field these audio sources can be intermingled and can modulate one another, again depending upon where your fingers are patching.

Sending CV signals into the 3.5mm input jacks will open up many more possibilities both in terms of synthesized sounds and audio processing. Since the two stereo circuits are mirror images of one another the 3.5mm ins and outs can also be thought of as (L/R,R/L) and when your hands get involved this imaging will be further confused and jumbled as your skin can intermingle all of these paths.

The Stereo Field can also be used as a controlled chaos source when using the 3.5mm outputs to send the feedback your hands create as CV to your modular system. Due to the nature of feedback and finger patching the 4 available CV signals have the ability to get incredibly complex, organic and textured in nature (see audio examples below in use with a euro-rack system). Because of the open nature of Stereo Field it can both send and receive CV modulation simultaneously. In addition, this can all be happening while your finger patching is changing and altering the incoming and outgoing CV while also processing incoming audio. These ins and outs can also be patched together with cables for sustained tones with the pitch/rhythm/volume/"cutoff" being affected by adjusting the incoming and outgoing volume knobs in various settings. Inter-patching in this way will also allow for sustained pulse beats and filter-esque sound shaping in addition to bringing new results to finger patching via the touch plates.

Most importantly, processed audio and synthesized audio are available simultaneously with the ability to influence and modulate each other. This will often blur the lines between the two; who is manipulating who, who comes out on top as audio and who is modulation? This can be a constantly evolving cycle based upon where the performers fingers are placed and highly sensitive skin contact pressure changes.

Notes: MachineRoom PRODIGY DUAL VCO is an analogue dual oscillator based on the legendary Moog Prodigy synth schematics. MachineRoom improved Bob's design by incorporating ICs with better thermal stability, increased the range of secondary oscillator, and also added cross-modulation possibility. As usual for this limited run of full-analogue handmade modules, MachineRoom used only thru-hole components.

The module features 3 octave registers and 3 waveforms per oscillator.

OSC1 generates SAW, SQUARE, and TRIANGLE waves with 8, 16, 32 octave registers.
OSC2 generates SAW, PULSE, and TRIANGLE waves with 4, 8, 16 octave registers.

Unlike the original version, PRODIGY DUAL VCO allows switching OSC2 to the LFO mode to modulate OSC1 or other parameters (LFO range is from 0.1 Hz to 8.6 kHz). Precise pitch tracking is up to 7 octaves.

PITCH control has a range of +/- of 1.5 octaves with a central point (to have the ability to quickly return to the initial frequency with precision). The rise/fall time of the GLIDE/SLEW is up to 5 seconds

HARD SYNC switch allows syncing the phase and frequency of oscillators.
LINEAR FM input has a built-in attenuator.

OSC2 UNISON control has a range of +/- 7 semi-tones (increase/decrease relative to the Detune central point).
OSC2 V/Oct Tracking switch activates or disables the OSC2's LFO mode. When disabled, OSC2 stops v/oct tracking, and the UNISON knob becomes a control for the LFO frequency.
OSC1 - OSC2 FM switch enables OSC2 as an OSC1 modulator.

When HARD SYNC is switched ON, Pitch/Sync knob controls the phase of oscillators.

The output level of each oscillator is about 3.5V which allows passive mixing. PRODIGY DUAL VCO is analogue so should be allowed 5-7 minutes to warm up before use.

Skiff-friendly design.

Thru-hole components only

20HP / 35mm deep

Current consumption:
+12V - 125 mA
-12V - 105 mA
+5V - 0 mA

Hand-built in Kyiv, Ukraine

Notes: TRILOBITE is a triple oscillator analogue module inspired by the original Moog schematics and made with thru-hole components only.

The module features:

- 4 octave ranges
- 3 waveforms (triangle, square, saw),
- UNISON (FINE) control with a range of +/- 12 semi-tones
- Independent LIN FM and PWM inputs with attenuators
- White noise source

Independent audio output is provided for each oscillator. A mixed output is also present featuring a level control.

We are recommended to use independent audio outputs to avoid distortion, in this case MiX output works as WHITE NOISE source with attenuator.

V/oct input of the first oscillator is normalled to all 3 oscillators, so OSC2 and OSC3 would track it too, however, connecting other signals to the other V/oct inputs make each input independent.

The minimum frequency of each oscillator is as low as 3Hz which makes it possible to use them as LFO.

Each oscillator tracks up to 9 octaves.

V/Oct range: 0-10 V

NB: Trilobite as is a full analogue module so should be allowed 5-7 minutes to warm up before use.

* 26HP
* skiff-friendly (25mm depth)
* 200 mA +12V
* 180 mA -12V
* 0 mA +5V
hand-built in Kyiv, Ukraine

Notes: Each generation of VLZ mixers benefits from a reinvestment in performance, all without raising prices. By continuing to ignore the "race to the bottom," VLZ4 benefits from generations of performance improvements like transparent EQ, class-leading negative summing bus architecture and custom-designed op-amps to ensure signal integrity from every input to every output. The result is a mixer that is at the peak of performance and is the obvious go-to compact analog mixer for engineers who demand professional results.

The performance of Mackie's Onyx mic preamps is more than proven. Just check all the amazing reviews and customer testimonials. Their boutique quality sound and unmatched performance rival any high priced, boutique preamp on the market. Adding these flagship preamps to our VLZ4 Series compact mixers underlines our commitment to continually improving the performance of the VLZ line with each generation.

The VLZ4 design goal was simple: every VLZ4 mixer must have the highest headroom and lowest noise possible. Strict attention to component quality and tolerances has led to innovations like our custom M80 op-amps and class leading negative summing bus architecture that add yet another level of assurance that a Mackie VLZ4 mixer is the right choice for your professional audio application.

Mackie VLZ mixers are truly built like a tank. From beer spills to drops from moving vehicles, the testimonials are as endless as the applications Mackie mixers serve. The VLZ4 series is certainly no exception. With a nearly indestructible steel wrap around chassis and features like grime resistant rotary sealed pots, you can be sure that buying a Mackie VLZ4 mixer is a solid investment.
VLZ4's new black powder coat finish, cockpit inspired controls and high contrast knobs not only optimise your mixer's usability in low light scenarios, it also means your mixer looks as good as it performs.

Mackie's VLZ4 line is extremely comprehensive, offering mixers of every channel count, every price point, for every application. From the ultra compact 402VLZ4 for desktop applications to the tour friendly 3204VLZ4, you can be sure there is a VLZ4 mixer with the right feature set for your needs

Notes: Introducing the podcast mixer that adapts to you.

The DLZ Creator XS compact adaptive digital mixer for podcasting and streaming enables you to get the results you want-faster than ever.

Inspired in part by smartphone and DSLR cameras that make great results accessible to anyone, DLZ Creator XS transforms the on-screen controls to meet your creative style or skill level-without compromising processing power or sound quality.

Three versatile modes

DLZ Creator XS features the same DSP processing power and features of the larger DLZ creator model, now in a compact design that doesn't sacrifice on capability.

Easy

A no-fuss user interface that offers the fastest path to recording your first podcast. For those who want to get great results without menu-diving.

Enhanced

Expanded control over your sound and mix. For those who want some customization without an overwhelming number of options.

Pro

Total control and fully customizable. For those who know what they want, and how to get it.

Built-in smarts

More than a digital mixer

DLZ creator XS is designed to help you become a better content producer.

Mix Agent is your personal audio assistant that guides you through setup and sound check, so in a few button presses you'll be recording.

AutoMix manages levels for up to four mics so everyone can be heard-even when they speak at the same time-which is a big help when you're busy hosting a show with multiple guests or hosts.

Using Mix Minus with your Bluetoothr-connected smartphone lets you add a caller into the mix with no audible echo when they speak.

Ins and outs of producing

2 PC Setup with NDI

Using an Ethernet cable, connect DLZ Creator XS to your router - the same router connected to your computer. Install the NDI Tools software, and DLZ Creator XS becomes an audio input and output on your NDI network.

Record/stream to computer, SD card

DLZ Creator XS is more than a podcast mixer or audio interface. Use it to record or stream multitrack audio to a computer via USB-C or an NDI connection, or straight to SD card for a truly self-contained setup.

All the power of a DLZ creator in a compact format

Connect up to 2 microphones and 3 external devices-including a smartphone-using analogue, Bluetooth, or USB.


The ins and outs of producing

A professional studio mixer for your desktop

DLZ Creator XS harnesses decades of Mackie expertise, making every detail count for your productions. From Onyx80 preamps that make even low-output mics sound both loud and pristine, to customized headphone mixes for each of your guests, DLZ Creator XS gives you the benefits of a professional studio mixer without the steep learning curve.

Ready for what's next

A portable and versatile podcasting interface

As a content creator, you know that flexibility is key. No matter how you like to create, the DLZ Creator XS podcast mixer supports you every step of the way. Record or stream to a computer via USB-C, or skip the computer and record full multitrack audio to an SD card for a truly self-contained setup.


Mackie knows creators

For decades, Mackie has provided musicians, DJs, and multimedia producers with the tools to create. From bedroom studios to the world's biggest festivals, Mackie mixers are literally everywhere. DLZ Creator XS puts all our knowledge into a new design for the next generation of creators.

Tech Specs


DLZ Control Modes, DLZ Mix Agent and Auto Mix technologies
7" high-resolution full-color touch display with anti-glare coating
2 discrete XLR/TRS combo inputs
Stereo channel with dual 1/4" TRS inputs
Stereo channel with 1/8" TRS connection
Stereo bi-directional Bluetooth channel
14x4 USB-C audio interface to Mac/PC
Record to MicroSD or USB Flash Drive
Professional audio processing (3-band parametric EQ, Noise gate, De-Esser, Compressor, Atomizer Reverb, Chronotronic Delay)
Fun and interactive voice-changing FX
Customizable pads for triggering samples, turning FX on/off, and executing commands (fade, duck, etc.)
Onyx80 mic preamps with up to 80dB gain
4 dynamically color-coded rotary encoders
5 potentiometers with dynamic LED level indication
Backlit mute, solo, and nav buttons
2 independent headphone outputs
Support for 9 languages
Pong? (yes, you can Pong on DLZ on your down time)

Notes: A true all-rounder from Mackie's ONYX range. 12-channel analogue mixer with built-in USB audio interface, allowing you to record your multi-tracks to a DAW or a stereo mix to built-in SD card.

Supplier's Notes:
Incredible sound quality, multitrack recording, and professional built-in effects make Onyx Premium Analog Mixers with USB the ultimate compact, affordable solution for live audio, home recording, and content creation.

If there's one thing Mackie engineers can do in their sleep, it's design a mixer that sounds great, is easy to use, and is packed with flexible features. Sounds pretty good right? So if you mix live sound, record in your home studio, or live stream, this is the heart of your audio.

Onyx Series mixers feature bright, easy to read buttons that shine bright in the darkest places so you will always know whats going on with your mix. On top of that, the full-color display of Studio Command makes it easy to adjust effects and SD card recording/playback.

To create the Perkins EQ, Cal Perkins started with the Wien Bridge circuit topology - a very musical design inspired by the hallowed "British" desks of the 60s and 70s. This design essentially trades boost/cut capability for a wider, highly musical Q filter. After a mind-numbing amount of math, Cal was able to specify capacitor and resistor values that would give the EQ an extra 6dB of control (i15 dB) without excessively narrowing the "Q" or bandwidth of the filters.

Line inputs: 10
Mic inputs: 4
Aux sends: 1
Compressors: 2
USB I/O: 12x4

Notes: ProFX10v3+ is a compact analogue mixer and USB-C audio interface with features from a studio recording console. Equipped with essentials including one-knob compression, EQ, Hi-Z switches and 100 Hz low-cut filters, it's the perfect centrepiece for your studio.

Mackie ProFXv3+ Series is a professional analogue mixer and USB-C audio interface with powerful enhancements for studio-quality recordings and live streams. Capture your performance with Onyx preamps and channel EQ, add computer audio via loopback, bring in calls via Bluetoothr and enhance your sound with upgraded GigFX+ effects on a colour LCD screen.

With up to 60 dB of gain and ultra-low noise, ProFXv3+ series mixers allow you to sound better than ever. Record podcasts, stream gameplay or produce the next hit-all with ultra-clean, transparent audio. The award-winning Onyx Mic Preamps deliver analogue warmth so you sound great, no matter what you do.

Enhance your sound using high-resolution GigFX+ effects, with 12 presets you can edit and save on the fly via the full-size LCD screen. Combining the warmth of an analogue recording console with precise digital effects, ProFXxv3+ is an ideal mixer for home studios and live events alike.

Capture your stream or performance at pristine 24-bit / 192 kHz quality with a built-in 2x4 USB-C audio interface, complete with three recording modes: Standard for the full mix with effects, Loopback to include computer audio with mixer signal for streaming, and Interface to record channel 1-2 without effects processing.

Use the dedicated Bluetooth channel to send and receive audio from devices like smartphones and tablets. For podcasters, it's an effortless way to bring in phone calls. For musicians and performers, it's the easiest option for streaming outside music and backing tracks.

Features:

4 Onyx mic pres with up to 60 dB of gain and ultra-low noise performance
High-resolution GigFX+ effects engine
Full-colour LCD display for editing and saving effects presets
24-Bit / 192 kHz 2x4 USB-C audio interface
Three recording modes: Standard, Loopback and Interface
Bi-directional Bluetooth for music playback and caller integration
3-band EQ on all channels
One-knob compression on channels 1 and 2
Hi-Z switches allow direct connection of instruments
100 Hz low-cut filter and 48V phantom power on all mic channels
Stereo 1/8" input on channel 9/10
Headphone output with separate level and blend control
Easily blend between monitoring your computer output and a latency-free feed from the mixer
Waveform OEM recording software Included
Legendary Built-Like-A-Tank design
Solid steel chassis
Tough ABS side protection

Line inputs: 10
Mic inputs: 4
Aux sends: N/A
Subgroups: 2
Compressors: 4
Effects: GigFX+
USB I/O: 2x4
USB Type: C
Recording modes: Yes
Bluetooth w/MixMinus: Yes

Notes: Mackie have always been strong when it comes to smaller mixing desks for studio and live use. The third-gen Pro FX12 continues that tradition. Lots of mix power for the money with a built-in audio interface too.

Supplier's notes:
The Mackie ProFX12 v3 12-Channel Professional Effects Mixer with USB is the ultimate affordable solution for live sound, home recording, and content creators. Now with our renowned Onyx mic preamps that offer 60db of headroom, everything from gain hungry mics to guitars will sound better than ever, and you can keep it all in check with simple single-knob compression. The new GigFX effects engine offers 24 built-in FX for even more options for adding the finishing touch. Record your tracks in 24-Bit/192kHz quality with 2x4 USB I/O plus zero-latency hardware monitoring for easy overdubs. Both ProTools First and Waveform OEM recording software/plugin packages are included.

Notes: Part of Mackie's excellent ProFX series, the 12v3+ combines a 12-channel analogue mixer with built-in USB audio interface for quality recordings. Includes GigFX+ digital effects, colour LCD screen and Bluetooth input.

Supplier's Notes:
12-channel professional analogue mixer and USB-C audio interface with powerful enhancements for studio-quality recordings and live streams. Capture your performance with award-winning Onyx preamps, channel EQ and analogue compression. Upgraded GigFX+ effects enhance your sound, plus you can edit and save your presets on the fly via the full-colour display. Switch between recording modes to track dry or include the FX, or use loopback mode to stream video games or perform over backing tracks without feedback. You can even bring in podcast guests over the phone via Bluetooth on a dedicated channel. With easy connectivity, the warmth of analogue and an upgraded FX engine, Mackie ProFX12v3+ is the perfect centrepiece for your studio.

Mackie ProFXv3+ Series is a professional analogue mixer and USB-C audio interface with powerful enhancements for studio-quality recordings and live streams. Capture your performance with Onyx preamps and channel EQ, add computer audio via loopback, bring in calls via Bluetoothr and enhance your sound with upgraded GigFX+ effects on a colour LCD screen.

With up to 60 dB of gain and ultra-low noise, ProFXv3+ series mixers allow you to sound better than ever. Record podcasts, stream gameplay or produce the next hit-all with ultra-clean, transparent audio. Our award-winning Onyx Mic Preamps deliver analogue warmth so you sound great, no matter what you do.

Enhance your sound using high-resolution GigFX+ effects, with 12 presets you can edit and save on the fly via the full-size LCD screen. Combining the warmth of an analogue recording console with precise digital effects, ProFXxv3+ is an ideal mixer for home studios and live events alike.

Capture your stream or performance at pristine 24-bit / 192 kHz quality with a built-in 2x4 USB-C audio interface, complete with three recording modes: Standard for the full mix with effects, Loopback to include computer audio with mixer signal for streaming, and Interface to record channel 1-2 without effects processing.

Use the dedicated Bluetooth channel to send and receive audio from devices like smartphones and tablets. For podcasters, it's an effortless way to bring in phone calls. For musicians and performers, it's the easiest option for streaming outside music and backing tracks.

Features

7 Onyx mic pres with up to 60 dB of gain and ultra-low noise performance
High-resolution GigFX+ effects engine
Full-colour LCD display for editing and saving effects presets
24-Bit / 192 kHz 2x4 USB-C audio interface
Three recording modes: Standard, Loopback and Interface
Bi-directional Bluetoothr for music playback and caller integration
3-band EQ on all channels
One-knob compression on channels 1-4
Hi-Z switches allow direct connection of instruments
100 Hz low-cut filter and 48V phantom power on all mic channels
Stereo 1/8" input on channel 11/12
Separate FX, monitor and subgroup busses
Headphone output with separate level and blend control
Easily blend between monitoring your computer output and a latency-free feed from the mixer
Waveform OEM recording software Included
Legendary Built-Like-A-Tank design
Solid steel chassis
Tough ABS side protection

Line Inputs: 12
Mic Inputs: 7
Aux Sends: 1
Subgroups: 2
Compressors: 4
Effects: GigFX+
USB I/O: 2x4
USB Type: C
Recording Modes: Yes
Bluetooth w/MixMinus: Yes

Notes: The new MULTI-FORMAT CASE PLAYER/MIXER (V10/A9) SET is specifically designed for transporting two CDJ/Multimedia Players and a 6 or 4-channel club mixer, such as the Pioneer DJM-V10, DJM-A9, or Ecler Warm 4. The case is universally compatible with all current models from Pioneer DJ, Denon, Allen & Heath, Ecler, Rane and Reloop, and can be adjusted to different device sizes using the included foam strips. Crafted from 9 mm vinyl laminated plywood, sturdy aluminum profiles, heavy duty butterfly latches and smooth rolling wheels, this case provides ultimate protection for mobile use on the road.

Fits

Pioneer DJM-V10
Pioneer DJM-A9
Pioneer DJM-900 NXS2
Pioneer DJM-900 NXS / SRT
Pioneer DJM-800 / 700 / 600
Pioneer CDJ-3000
Pioneer CDJ-2000 NXS2
Pioneer CDJ-2000 NXS
Pioneer CDJ-900 / 850 / 800
Pioneer XDJ-1000
Allen & Heath PX5
Allen & Heath DB4
Allen & Heath DB2
Allen & Heath Xone 92 / 62 / 43C
Denon LC 6000 Prime
Denon SC-6000 / SC-6000M
Denon SC-5000 / SC-5000M
Denon X1850 / X1800
Denon X1600
Denon SC3900
Denon SC2900
Reloop RMX-90 DVS
Reloop RMX-80 Digital
Ecler Warm 4
Ecler NUO4
Rane MP2015
Rane Sixty-Eight / Sixty-Four

Specs

Outer measures: 125,4 x 59 x 25 cm
Inner measures: 33,1 x 42,5 x 8,4 cm / (CDJ compartment) 43,7 x 45,4 x 8,4 cm (Mixer compartment)
Weight: 21,5 kg

Notes: A modern classic. Superb little semi-modular monosynth in its own right, but comes alive when paired with other modular gear. A great option for beginners and experienced synth users alike.

Supplier's notes:
The 0-COAST is a single voice patchable synthesizer. Its name reflects the fact that it utilizes techniques from both the Moog and Buchla paradigms (aka "East Coast," and "West Coast," due to their locations), but is loyal to neither and thus implements "no coast synthesis."

While the 0-COAST utilizes classic modular synthesis techniques, it's designed to operate with or without the use of patch cables. The necessary connections have been made from circuit to circuit so it operates as an expressive, musical MonoSynth. Using only the MIDI controller of your choice you could apply new timbres to your existing musical forms!

Using the included Patch Cables you could get more scientific, experimenting with new ways to wire up the circuits. You might even forgo MIDI altogether, disappearing into a cloud of analog FM induced Sidebands and harmonics scattered around a single fundamental drone that has nothing to do with any form of music you've ever known.

Notes: Brilliantly innovative sequencer from the renowned synth brand. Huge creative potential in the studio and live settings. Ideal for use with analogue synths and Eurorack.

Supplier notes:
The Make Noise 0-CTRL is a patchable, clockable controller and step sequencer for voltage controlled synthesizer systems. Designed to be patch pals with the 0-Coast, it is a tabletop device whose inputs and outputs follow Eurorack standards, making it also a great partner for a modular system or another patchable tabletop synth.

Power Requirement: +15VDC on 2.1mm Tip Positive Connector
Includes Power Adapter, Patch Cables

Notes: Freaky stereo digital delay from the Eurorack gods at Make Noise. Typically creative stuff, packed full of interesting features for creating complex echoes, modulating sounds and generating loops.

Supplier notes:
The Mimeophon music synthesiser module is a stereo, multi-zone colour audio repeater by Make Noise and soundhack, coded by Tom Erbe.

The Mimeophon (from Greek mimeo (repeat/copy) and phon (sound)) is a modern take on various historical sound copying, echo and repeating devices. It allows for Stereo modulations of Time, Space and Timbre of Mono or Stereo sound sources. The Mimeophon is capable of modulating and morphing time scales of repeated sound from micro-sound to note to phrase length while also colouring and spatializing the repeats.

Notes: The Rene music synthesizer module is a powerful three-dimensional prism of composition. It is the world's only 3D Cartesian Music Sequencer. Named for the French philosopher & mathematician Rene Descartes, it uses the Cartesian coordinate system to unlock the analogue step sequencer from the shackles of linearity. The original Rene was a one-channel, two-dimensional Cartesian sequencer with limited memory, this new Rene is a three-channel, three-dimensional Cartesian sequencer with memory for up to 64 complete States. Considering the multiple channels and FUN programming options per multiple axis, Rene has become an n-dimensional matrix or tesseract of synthesizer sequencing.

Notes: The XPO or Stereo Prismatic Oscillator music synthesizer module is a Voltage Controlled Analog Oscillator designed for generating Sine waves, Triangle waves, Sawtooth and Spike waves, Sub-Octaves, Stereo Timbre Modulations (including Pulse Width Modulation and Wavefolding), Oscillator SYNC, Linear FM and more in the analog domain.

The XPO is designed to be the Stereo VCO complement to our Stereo Filter, the QPAS. The two modules share the core idea of complex circuits being controlled in multiple dimensions in the stereo field by a few powerful parameters. The Stereo Prismatic »

Features:

Stereo Analog VCO with eleven simultaneous outputs (five mono outs and three stereo pairs)
Modulate Timbre via Stereo Pulse-Width Modulation, Stereo Vari-Timbre, and Stereo Wavefolding
Sine, Triangle, Sawtooth, Spike, and SUB mono outs
Unique Mono versions of all Stereo Waveforms via Left output normalizations
Modulate Left and Right channels together or separately thanks to normalization and attenuverters
Center parameter adds additional timbre control to both sides of Vari-Timbre and Wavefolded outputs
Linear FM Bus features voltage-control over FM depth and a normalization of SUB to FM input for easy GROWL
Hard SYNC circuit
Two 1v/oct inputs for transposition, melody stacking, or richest FM
Expo FM input with attenuverter
Designed to pair well with QPAS, Mimeophon, and X-PAN

Specifications:

Width: 18hp
Max Depth
(incl. power cable): 45mm
Power:
145mA @ +12V
135mA @ -12V

Notes: Sixteen Seconds Delay vintage eurorack version, inspired by the original looping delay from 1983.

The device topology is the same as first digital delays from that era, with an all-analogue signal path, pre emphasis and de-emphasis, compression and expansion, antialias and reconstruction filtering and input output buffering and mixing.

Digital processing is limited only to analogue to digital conversion, memory management and storage and digital to analogue conversion, all in glorious eight bits.

There's also an analogue triangle Low Frequency Oscillator for modulating delay time/pitch Maximum delay time has been increased to 32 seconds, there are toggle switches for slow/fast speed/pitch , freeze function and reverse playback.

On board modular inputs for CV control of sample rate, infinite/freeze, reverse, slow/fast, reverse, delay line retrigger for sync and stutter experimentation.

Slider illuminated controls are delay time coarse, delay time fine, sweep rate and depth, feedback and mix.

Proudly hand built in Uruguay, by Maneco Labs also creators for the Grone Drone machine Eurorack, Tabletop and Pedal drone generators among others.

Notes: Fuzz meets synth meets reverb in this clever pedal. Built-in drone VCO, noise generator, LFO and effects allow you to warp and twist input signals into completely new tones and textures.

Supplier's Notes:
Grone 2 Dark Drone machine Pedal Version

Blocks description

Drone VCO:

Generates sound based on equations converted to analogue signals, there are sixteen equations selected by algorithm up pot. Four LEDs indicate equation number in binary mode. Three Pots modify numbers used by the equation, A0, A1 and A2, fourth pot Sample Rate controls pitch and speed of the oscillation. There's an expression jack input, EXP2 for controlling sampling rate.

NOISE GENERATOR: White noise with noise level pot.

Voltage Controlled Filter: MS20 resonant low pass filter, with CUT frequency pot control, RESONANCE, MODULATION 1 amount pot, Expression jack input 1 controls filter cuttoff.

LFO1: Low frequency oscillator routed to MOD1 from VCF, RATE and WAVEFORM shape Pots.

Waveforms are: ramp up, ramp down, square, triangle, sine, sweep, random levels, random slopes

FUZZ Section: gain stage that affects input signal, with controls for input gain and level.

Effects Section: Consists of a chorused reverb with delay, adding octave up or down component, with freeze function

Pots controls:
1-Blend controls mix of effects over final output signal
2-Octave blends mix a pitched signal to the input of the reverb
3-Octave -1 +1 controls tuning of pitch component
4-Repeat controls feedback of delay component
5-Balance controls mixture from reverb and delay.
6-Pitch controls the sampling rate of the whole effects section, modifying delay time and reverb decay.

Footswitches:
1- Synth: mutes or enables the drone VCO and noise generator
2-Filter: Bypass for the VCF
3-Fuzz: Bypass for the fuzz that processes the input signal.
4-reverb: Bypass for the reverb/delay section
5-Freeze: toggles freeze function for reverb section

Jacks:
Input, Expression 1 input (VCF) Expression 2 (VCO sample rate), Output

Notes: Evolved version of Maneco's drone synth uses an oscillator based on equations, a Korg MS20-inspired filter and built-in reverb. Check out the Grone Expander for added touch-sensitive controls.

Supplier's Notes:
Dark Drone Machine

Generates sound based on equations converted to analog signals, there are sixteen equations selected by Up and Down switches. Four LEDs indicate equation number in binary mode. Three Pots modify numbers used by the equation, A0, A1 and A2, fourth pot Sample Rate controls pitch and speed of the oscillation. There's an Output Level pot for the oscillator and a dedicated jack for patching the Oscillator sound to external modules.

NOISEGENERATOR:

White noise with noise level pot and noise output jack.

VCF:

MS20 resonant low pass filter, with CUT frequency pot control, RESONANCE, MODULATION1 amount pot, input and output jacks and second cv input for cutoff, labeled MOD2

LFO1:

Low frequency oscillator routed to MOD1 from VCF, RATE and WAVEFORM shape Pots.

Also routed to delay block1

Waveforms are: ramp up, ramp down, square, triangle, sine, sweep, random levels, random slopes

EffectsSection:

Delay with tap tempo and reverse component: controls for delay time, delay feedback, delay level and reverse component, tap tempo input jack for external control

Reverb with freeze button, controls for reverb level and reverb decay, input jack for freeze function

Notes: Osc 1 and 3 - Bytebeat oscillators

Generates sound based on equations converted to analog signals , there are sixteen equations selected by Up and Down switches. Four LEDs indicate equation number in binary mode. Three Pots modify numbers used by the equation, A0 , A1 and A2 , fourth pot Sample Rate controls pitch and speed of the oscillation. There's an Output Level pot for the oscillator and a dedicated jack for patching the Oscillator sound to external modules .

Hold toggle switches select between fast decay, long decay and hold mode, for the touch trigger input. There are CV inputs for pitch on these two oscillators

Osc 2 and 4 -Wavetable oscillators

Digital oscillators, touch controlled or gate controlled by gate jacks, pitch is controlled by pitch pot, modulation by LFO A or LFO B and cv inputs.

A0 pot selects waveform, A1 pot morphs between two waveforms.

There are individual output jacks.

LFO 1 and 2

Low frequency oscillator routed to MOD inputs for oscillators 2 and 4, also to modulation input for delay section, selectable by toggle switch , RATE and WAVEFORM shape
pots.

Dimensions
36 HP

Current Draw
200 mA +12V