搜索结果

Notes: The Neutron Flux 8 Pole Variable Character Filter is a 12hp skiff friendly eurorack filter module with a stereo analog core and digital control over it. The controls are familiar filter module controls (cutoff, bipolar FM, mode, drive) with some added spice and no complexity.

The special stuff is in these controllable features:

Character: This control blends between five vintage influenced classic filter characters: Fat, Crisp, Liquid, Sour and Mean. Coming later in a firmware update, the Neutron Flux will also have two user banks for more specialized filter characters which can be replaced via audio update.

Overdrive: You can switch the drive circuit to have a +20dB boost and have the drive pot to sweep from clean via warm saturation to extremely hard distortion.

Stereo: This control spreads the cutoff between L and R channels and induces drift. This way a mono signal can be split into wide stereo.

Two 4 pole filter cores: These can be run in stereo, mono to stereo or chained as a 8 pole mono filter for almost LPG-like steep slope. Both of them have their own drive circuits so you can have the overdrive stage in the front, in between or both.

The module can be used in many different ways. It can do classic LP/HP/BP filtering. It can self-oscillate in different waveforms. It can provide analog warmth and process something coming out of your DAW. It can act as a stereo distortion. It can spread your mono signal to a wide spatial stereo soundscape. It can do formant stuff and other wild characters. It can do audio-rate deep FM (1V/oct and FM CV's are all analog).

Power consumption: 250mA at +12 V and 100mA at -12 V
Depth: 25mm
HP: 12

Notes: Unique synth voice based around a digital triangle wave oscillator with percussive element, dual filters, envelope, LFO, spring reverb and touch pads for performance.

Supplier's Notes:
The Quandrantid Swarm module is a versatile and unique synth voice for sound designers and musicians looking to explore exquisite and unfamiliar timbres that range from subtle to outrageous, nebulous to shimmering.

It features a digital synthesizer voice with a percussive element, an analog 2-pole filter, an LFO with eight waveforms, and a spring reverb. The 8 touch keys can be used as a mono keyboard, polyphonic keyboard or an eight step sequencer. The synth interfaces with other instruments via MIDI, and CV/Trig inputs. The semi-modular design allows you to get hands on immediately, but you can and should use patch cables to fully explore the potential of this instrument.

Power consumption: 170mA at +12 V and 70mA at -12 V

HP : 40

Notes: Jomox's legendary analogue kick drum prowess distilled into Eurorack form. Hugely versatile sound with plenty of CV control on the front panel, plus MIDI via DIN sockets hidden round the back.

Supplier's Notes:
The mightiest Bass Drum - MK II

Tune Varies the pitch envelope of the VCO

Pitch Basses as low as 10Hz reach up to 175Hz

Decay Up to 2 sec

Harmonics Enrichment of harmonics of the VCO - for the hardest kick drums on planet earth

Pulse Change of the pure pulse part of the attack - gate time affects this parameter also

Noise Change of the pure noise part of the attack - gate time affects this parameter also

Attack Level of the mixing of Pulse and Attack

EQ Filters the bass drum with a low pass filter - for soft and 808ish kick drums

Gate T Varies the gate time from 0.1ms to 16ms

Compr Compression of decaying envelope - for slim and clicky kicks and all the depth that is needed

MetNze Metalized noise. A complex digital multitone pattern of 499 different combinations feeds the attack noise

CV1-CV4 can route the external 0-5V CV signals to any of the above parameters including LFOs. Also negative amounts are processed.

LIN.FM This is a true analog dedicated CV FM modulation input for the bass drum VCO. It only works linear-wise and does not offer musical semitones across the CV scale.

ACC This is a CV input for the kick drum accent / velocity. This input may also trigger the kick drum dynamically if the ACC trigger mode is set and the sequencer is able to generate dynamic pulses.

LFO The ModBase 09 has 2 LFOs that work on the pitch of the bass drum. The LFO always starts syncronous to the gate trigger.

The wave forms are: saw up, saw down, sine+/-, triangle+/-, rectangle+/- and portions of it.

MIDI The midi controllers of this module are identical to the Alpha Base/XBASE999/MBase11. All parameters including LFOs can be remotely controlled by Midi CCs.

Bus Env Is the programmable level of the audio out signal from the bus on the back mixed to the Kick Drum VCA envelope. Works with experimental Jayemsonic modules.

140 mA +12V
80 mA -12V
0 mA 5V
53 mm deep

Notes: Unique hands-on performance effects module inspired by DJ gear, featuring colour processing, compression, reverb, glitch and much more besides. Great sound and lots of CV options.

Supplier's Notes:
Per4mer is a 14hp eurorack formatted quad performance effects unit. Inspired by time-honored DJ effects processing boxes, Per4mer allows for a hands-on and CV / Gate controlled eurorack effects performance interaction. Whether momentarily engaging or latching FX, Per4mer offers an unrivaled and fun experience.

The basic principle of Per4mer is to feed in an audio input and to trigger on-the-fly effects, bringing DJ style live improvisation to a modular environment. Effects can be triggered simultaneously or individually where an inspiring effect palette combines to generate unique creative beats and melodies.

Per4mer includes 4 performance effects (Delay, Reverb, Glitch, Tape Stop) and 2 processing effects (Color processor & Compressor). Each of the 4 performance effects has its own set of 4 parameters controlled by the 4 knobs or CV inputs. Effects can be used simultaneously or individually allowing for a vast variety of creative effects combinations.

The Color processor allows for engaging any of the 4 coloration presets - Classic (12bit), LoFi (8 Bit), Saturation, and Wax. Combine any one of these color presets with the onboard Compressor and Side-Chain input to instantly transform any audio signal's mood and vibe.

Engaging the Reverb along with the "12-bit classic" color option gives an incredibly lush lo-fi reverb sound while disengaging the color option allows the reverb to remain just as beautifully lush and hi-fi. The potential is nearly limitless.

Per4mer's 'Glitch' effect is inspired by classic beat repeat and looper effects offering 4 controls - Wet/Dry (sound on sound), Loop size, Pitch, and reverse. Conversely, the Tape Stop effect allows for the perfect punctuation of any audio signal.

Width: 14HP
Depth: 25mm
Power: +12V: 50mA, -12V: 0mA

Notes: Digital 12-bit oscillators meet analogue filters in this creative little synth module. Six-voice polyphony, preset storage and MIDI control make for a compelling instrument with its own distinctive sound.

Supplier's Notes:
The Tooro is Fred's Lab's new 6-voice 4-part hybrid "digilog" polysynth.

Including the latest discoveries in mixed electronics, the original FL A847 analog filters, this is the perfect module for demanding sound designers and every musician seeking distinctive tones with a strong personality, in a very compact form factor.

Each voice offers 2 complex digital oscillators with waveform morphing, 2-operator linear phase modulation and self-sync features plus a noise source, a ring modulator, the unique FL A847 lowpass filter accompanied by a digital shaper, 2 advanced LFOs and 2 ADSR envelopes.

A modulation matrix with 8 slots allow the animation of most of synthesis parameters.

A master stereo digital FX offering various modulated delays is also included.

Tooro is shipped with a printed version of the QuickStart Guide (in English) and a 1 meter black USB cable.

Technical aspects:

All Fred's Lab instruments are produced and manually assembled locally in Germany.

The Tooro is a polyphonic and multitimbral synthesizer module with 6 voices, 4 parts, per voice analog filters and a stereo signal path.

Sound Engine

Per voice

Oscillators:
Two 12bit digital oscillators with:
waveform morphing
additional sine modulator (for linear through zero phase modulation)
auto-sync feature - hardsync

Filter:
A single FL A847 12dB/Octave low-pass filter with auto-oscillation and saturation features.

Shaper:
A selection of digital filters algorithms from Fred's Lab.

Noise:
A regular white noise source.

Ring modulator:
An audio rate multiplication of osc1 output by osc2 output.

Envelopes:
Two ADSR envelopes with hold stage and multiple triggering options.

LFOs:
Two complex LFOs with various waveforms and their own AD envelope.

DCA:
A digitally controlled attenuator with volume and panning control.
Per part
MIDI channel selection, overall part volume and panning.

A syncable arpeggiator with multiple modes is included.
Global
Multi-FX
A 12bit digital multi-FX module with various modulated delays.

Instrument:
Memory
The Tooro can store:
100 sound presets
10 multis

Connectivity:
2 line-level unbalanced 6.35mm jacks (mix left & right)
2 instrument-level 3.5mm jacks for separate voice outputs (for voice 1-4 only)
1 DIN5 MIDI-IN
1 DIN5 MIDI-OUT (OUT + smart THRU)
1 USB 1.1 B compatible port (for power and MIDI over USB)
1 power switch

UI:
4 high-quality metal encoders
14 tactile switches
dual digit 7-segment hexadecimal display
12 leds

Mechanics:
aluminum industrial enclosure
quality rubber feet
170 x 120 x 45 mm
550 grams

Notes: Explore unique sonic possibilities with this semi-modular digital synth, combining physical modelling with spectral sound sources, versatile effects and complex modulators.

Supplier's Notes:
An affordable hybrid monophonic synthesizer that allows you to create new sound universes inspired from the real world, where objects collide, vibrate, and resonate.

Anyma Phi blends the classic ingredients of electronic music with physical modelling technology, allowing it to simulate acoustic sound sources, such as strings or reeds, as well as resonating structures, like wood, glass, or metal.

Anyma Phi is compact enough to stand on your keyboard, or anywhere on your desk, and is compatible with any MIDI controller, such as keyboards, sequencers, or even wind controllers, including Aodyo's own Sylphyo.

Whether you play live or record in the studio, design sounds or play presets, Anyma Phi will become an indispensable tool. It can even be used as a stand-alone effects processor, or as part of a guitar effects pedal setup.

The heart of the Anyma Phi is the matrix, which provides a quick and easy way to explore your sounds by following a physical metaphor, with four macros for each of the five stages of sound generation:

With its matrix, Anyma Phi offers a straightforward way to tweak, explore, and create sound universes. It also provides easy ways to make your sound react to your MIDI controllers with mapping shortcuts. But don't be fooled by the simplicity!

If you want to dive deeper, you can take control of the powerful semi-modular synth engine beyond the matrix, with oscillators covering a wide range of synthesis techniques, effects, and modulators.

By connecting those together, you can create any kind of sound, and control it any way you want.

Anyma Phi offers you:
Up to 3 oscillators (sound sources)- physical models, classic spectral, noise souces, external input
Up to 5 effects: resonators, filers - EQ, pitch shifter, ring mod, delay - reverb, chorus - phaser, drive - folder
Up to 8 modulators: envelopes, LFOs, curves, slew limiter, math & logic

This amounts to 69 different module types available, including 30 sources, 22 effects, and 17 modulators.

Technical specifications:
Hybrid monophonic synthesizer
Stereo audio output:
Two 1/4" mono line jack outputs
One 1/4" stereo headphone jack output
1/4" stereo jack audio input (internal piezoelectric mic when external input unplugged)
MIDI inputs and outputs via USB and DIN ports
Powerful digital semi-modular synthesizer engine :
Memory: 200 patches
3 oscillator slot
5 effect slots along 2 serial buses (Main, Aux) + 1 mono reverb
16 modulator slots, including envelope generators, LFO, curves, interpolators, slew limiters, etc.
32 mapping slots (virtual patch cords), each allowing to control any synth parameter (including another mapping) using a modulator or a controller input, with a sidechain input
Responsive to pitch, pitch-bend, velocity, breath control / expression, as well as 4 other controller inputs

Additional features:
Percussive playing surface
Patch librarian / editor
Extended memory

The percussive playing surface will allow you to tap and scratch your sounds directly on the case, making your performance even more expressive and fun! This would be made possible by integrating a piezoelectric contact microphone into the case. The resulting sound would be available to use on the Anyma as an audio input, ready to be fed into resonators and effects!

You can edit patches directly on your Anyma, as well as send and receive patches via MIDI SysEx. But what about something more comfortable and powerful?

This software will allow you to easily manage and share patches, as well as edit them in depth in a streamlined environment on your PC or Mac, by making all the synth components directly visible and showing their interactions.

With more memory, you can have a huge library of sounds at your fingertips, or you can make many variations of your patches without having to worry about space or having the computer editor around to make backups!

Let's free the Anyma Phi from the shackles of the Western 12-tone equal temperament! A440 be gone!

Notes: Jürgen Haible's legendary redesign of the Tau "The Pipe" Phaser has now (and for the first time ever) been adapted to Eurorack format. The 2021 version is a new, skiff-friedly design. It includes some additions and modifications compared to the original Haible version like Extended CV control: -1V/Oct and an attenuverting CV input.

Some details of the Haible TAU Pipe phaser module:

Faithful adaption of Jürgen Haible's design
Uses crazy caps for sonic performance.
Eurorack (3U) format, 18 hp
Skiff-friendly: < 30mm deep
Power: appr. 45mA @ +12V and 40mA @ -12V

Notes: Compact but premium 2x4 audio interface from one of the best brands in the business. Superb sound quality with built-in hardware DSP.

Supplier's Notes:
Legendary Sound Quality, Total Portability and Hardware DSP all Come Together in a Beautiful New Design

In 2007, the original Apogee Duet shattered the expectations of what a home studio interface could be. Professional, personal and portable, Duet revolutionised independent recording and empowered musicians, producers and engineers with legendary Apogee sound quality, elegant design and effortless ease of use. Now, the all-new Duet 3 brings next-generation Apogee performance and features to a beautiful ultra-low profile scratch resistant glass and aluminium case.

Duet 3 includes on-board hardware DSP that works with the Symphony ECS Channel Strip* for zero-latency recording with FX. Tuned by Bob Clearmountain, the ECS Channel Strip includes presets custom crafted by the legendary mixer so you can dial in a pro recording sound instantly. Ideal for music creation, voice recording, streaming and even gaming, you can use Duet 3 with your Mac or Windows workstation in your studio or on the go. Take your Duet 3 to the next level with the sleek Duet Dock* accessory for the ultimate ergonomic desktop experience.

Achieving superior sound quality in a digital audio interface requires experienced engineering that artfully orchestrates AD/DA converters, digital clocking, analog circuitry and power management technology to achieve a harmonious blend of carefully selected components and thoughtful design. Duet is the result of decades of innovation and expertise and delivers sound quality unmatched in its class.

Legendary AD/DA Converters

With two inputs and four outputs of legendary Apogee AD/DA conversion, plus two world-class preamps, Duet is the perfect partner for your home and mobile studio. Connect microphones, guitars, keyboard and line level devices to capture every detail. Monitor and mix with the full depth and dimension of your sound through two truly-balanced, line-level analog outputs for speakers. And, power your headphones with a zero-ohm headphone output for a dedicated headphone mix.

World Class Preamps

One of the most critical components for high quality recording is your preamp and the pres in Apogee Duet are world-class. With up to 60dB of gain and 48v phantom power, you can cleanly and precisely capture any audio source with even the most demanding microphones. Meticulous Apogee engineering, keeps noise and distortion down, even as you crank up the gain.

Plug-in to On-board DSP

To capture your best performance, you need to dial in an inspiring sound quickly and easily. And few things are more distracting than latency when trying to record. Duet gives you on-board hardware DSP for FX processing with the Symphony ECS Channel Strip (sold separately) to precisely shape your tone on input and give you great sounding tracks, all while eliminating the delay that can occur while recording. The Symphony ECS Channel Strip, tuned by legendary mixer Bob Clearmountain, includes EQ, Compression and Saturation controls that let you create the optimal blend of channel FX for tracking vocals or acoustic instruments. Choose from multiple hand crafted Clearmountain presets and record with zero latency through Duet's on-board hardware DSP.

Receive 50% off the Symphony ECS Channel Strip from your Apogee dealer when you purchase Duet 3 or when you register on the Apogee website.

The all new Apogee Control 2 software gives you complete control of all Duet functions and features including the Symphony ECS Channel Strip FX running on Duet's hardware DSP. Apogee Control 2 is shared across all current and select previous generation Apogee products and will enable Apogee support and engineering to quickly react to future macOS and Windows OS updates helping to ensure Duet 3 compatibility for your workstation.

Sound quality comes first, but elegant design is a close second. After all, you're always hands-on, controlling listening level and mic pre gain, so why shouldn't the centerpiece of your studio have a high-end look and feel? The Duet multi-function digital controller knob delivers a luxurious-feel for dialing in monitor levels and mic pre gain, while also giving the desktop interface style accents backlit with purple LEDs. Perfectly contoured for ergonomic control on your desktop, the low profile body is topped with scratch-resistant cover glass for a modern look and solid feel.

Duet Dock

Duet set the standard for making music and recording on the go with its small footprint and flexible breakout cable. But when working in your studio, the best way to use Duet 3 is with the all-new Duet Dock*. The Dock positions Duet at the ideal angle for quick adjustments and meter and function visibility. The rear panel connectors on Duet Dock make it easier to organize and connect your cables to Duet too.

*Sold Separately

Notes: This is a complex Gate / CV generator based on probabilities.

Functions:

Knob 1:
%1 = Gate 1 Probability
5TG = Fifth Output Type: Trigger/Gate
N1 = Note 1 Tuning

Knob 2:
%2 = Gate 2 Probability
T.SIZE = Trigger Size
N2 = Note 2 Tuning

Knob 3:
%3 = Gate 3 Probability
DIR = LOCK Mode Direction: Backwards/pendulum/forward
N3 = Note 3 Tuning

Knob 4:
%4 = Gate 4 Probability
S.SIZE = LOCK Mode Sequence Size: up to 16 steps
N4 = Note 4 Tuning

Knob 5:
SWING X = Clock Swing X: 1 to 16
Y = Clock Swing Y: 1 to 16
N5 = Note 5 Tuning

Gate Outputs Behaviour:

At every clock input, based on the four knobs probability settings, the module will select one active gate out, only one of the five gates will be active at all times. All Gate outputs can also behave as a Trigger instead, Trigger size can also be adjusted.

The knobs set the probabilities of each gate to be chosen, here's an example of how this operates

With all first four knobs at 12 o'clock the first Gate has 50% of being the chosen one, the remaining 50% of the times will be passed through the next knobs. So Gate 2 at 12 o'clock has 50% of the remaining 50% left by setting one, which leaves it with 25% chance of being the chosen one, the remaining 25% will be passed through Knob 3 which will have 12.5% chance of being the chosen one, the remaining 12.5% will be sent to Setting 4 which will have a probability of 6.25%. The remaining percentage left by the 4 Settings will always be the probability of Gate 5, in this case the remaining 6.25%.

Here's a couple more examples.

All knobs at 12 0'clock
Setting 1 = 50% chance, 50% left for remaining settings.
Setting 2 = 25% chance, 25% left for remaining settings.
Setting 3 = 12.5% chance, 12.5% left for remaining setting.
Setting 4 = 6.25% chance, 6.25% left for Gate 5.

All knobs at 9 0'clock (aproximate values)
Setting 1 = 20% chance, 80% left for remaining settings.
Setting 2 = 16% chance, 64% left for remaining settings.
Setting 3 = 12.8% chance, 51.2% left for remaining setting.
Setting 4 = 10.24% chance, 40.96% left for Gate 5.

Tuning and CV outputs:

While in the Tuning page you can use all knobs to set the 5 pitches
When in tuning page knobs should be rotated one at a time!
While rotating the knobs the CV out 4 will be used as a monitor, the other 3 CV outs will be behaving normally.
The module detects which pot is being rotated and outputs the relative pitch CV on CV out 4 for all knobs.
While on this page the tuning will be quantized or not relative to the panel Quantize on/off switch. Even if this process is done in quantized mode the module always store the free value in order to allow quantisation to be turned off later.
Once you're happy with the tuning you can exit the page, new values are stores to memory while exiting the page.
When tuning the module detects both the note selected and the relative octave.

CV Outs behaviour
This will be easier to explain with examples

Let's say we tuned these notes:

C0 or 0v
D1 or 1.166v
F2 or 2.466v
G3 or 3.583v
A4 or 4.75v

1. Next Logic out calculated is gate 3.
CV outs 1-2-3 will output a note in octave 2, the note itself is randomised from the 5 tuned notes (C,D,F,G,A).
CV out 4 will output the exact note tuned with knob 3 (F2)

2. Next Logic out calculated is gate 5.
CV outs 1-2-3 will output a note in octave 4, the note itself is randomised from the 5 tuned notes (C,D,F,G,A).
CV out 4 will output the exact note tuned with knob 5 (A4)

Out 1-2-3 is octave related
Out 4 always output the original tuned note

Knobs Pages access:

MENU/TRIGGER button is used to access pages
After power up it gets to first page by default.

Page 1:
MENU/TRIGGER button is off and blinks with clock inputs

Page 2:
Pressing the MENU/TRIGGER button for 3 seconds the Button Led lights up meaning you're in Page 2, changing knobs will affect the secondary function.
Releasing the button jumps to Page 1

Page 3:
Pressing the MENU/TRIGGER button for 3 seconds the Button Led lights up, keeping it pressed without moving any knob for 3 more seconds makes the Button led go off. At this time you can release the button. After that the button will light up meaning you're in page 3, or the tuning page.
Pressing the button one time jumps to Page 1

Soft-Recall and Memory:

Knob positions are stored in memory while in operation to be able to have a soft recall of the settings, so when jumping from page to page you'll need to rotate the knob until you find the last setting and only then they start to operate. Whenever the pot crosses the last setting point the MENU/TRIGGER button will blink indicating that the knob is now active.

Page 2 & 3 have permanent memory so it will always load the last settings after power up.
Page one is volatile and powers up with the initial knobs settings.

Notes: The ADDAC603 VC Triple Bandpass Filter provides three channels of bandpass filters, fantastic for sculpting complex sounds. Each of the channels feature a gain/distortion control with switch to select between x3 or x100 gain, which can cause the input signals to distort, adding another layer of harmonic interest.

The inputs are cascaded together to allow for one source to be filtered three different ways - or each filter can be used independently. The three filters also feature controls for frequency, which sets the cutoff point; width, which sets the width of the band that is being filtered; feedback, which at high settings causes the filter to self-oscillate, and level control, which sets the amplitude of the output. Frequency, bandwidth, and output level each have CV inputs with attenuverters.

A switch sets whether the filter is 24 dB or 12dB per octave. There are individual outputs with phase switch, plus a mix output and dry/wet output with adjustable control for mix balance. This module provides a wide variety of filtering options to add complex tonal shaping to your rack.

Tech Specs:

22HP
3.5 cm deep
250mA +12V
250mA -12V

Notes: This module was developed upon the Tubaz Filter which was released in 2014 by Gotharman but is currently no longer in production. We loved the original module so much that we officially licensed it's circuit and expanded it to feature several new functionalities.

Here's a paragraph from Gotharman regarding the original design:
"I designed it with the purpose of adding crunch, edge and distortion to my eurorack system. It is not an ideal bandpass filter, that cuts off all frequencies above and below the center frequency.
Because of its high drive, there are, in most cases, some bleedthrough of the harmonics, that should have been cut off. You might consider calling it a "Band Add" filter. The main purpose of it, was to add edge, not to be a perfect bandpass filter."

While everything he mentions is still true we believe he was being modest, It's a dirty, gritty, growling and whining monster which promises you some of the most peculiar filter sounds you'll ever hear.
However do not classify it as a "weird" distortion unit just yet because besides this hairy character it can be easily tamed (using lower volume levels) and then, with some care and intention from the user, it will transforrm itself showing it's feline purrrrr and cuddle sweet and caring, or like any good mut, showing up at night all happy, wet and dirty from a full dog's day and will lay down at your feet while wiggling it's tail howling as yawning just happy to be back home.

As such, standard volume principles do not quite apply to these units, the Audio Levels will go up to x2 amplification, Drive will go up to x11 and master outs go up to x2. The combination of these will cover all diferent qualities it can present. Overall sound can be distorted pre-Tube (raising input levels), in Tube (raising drive) or post-Tube (raising Out levels).
Higher Inputs and Drive will always be gritty, lower Inputs and Drive volumes together with higher Output levels will make the overall behaviour more mellow and closer to what a typical filter would behave like.

No standard expectations should be considered when acquiring these units, all of the tubes were built in the 70's and were bought from various sources, we always kept the premise that no tube was a bad tube (unless not really workinng) so due to each specific characteristics no module will sound exactly the same, making each unit particularly unique. This uniqueness will be particularly evident on their resonance/self-oscilating timbre as well as in their own microphonic qualities.

Regarding power and current draw, the module is designed using a low power tube, so it won't starve your eurorack power supply.

Tech Specs:
12HP
3.5cm deep
90mA +12V
60mA -12V

Notes: Stylish and compact speakers with powerful 200-watt amplifier built in. Impressive 50 Hz - 20 kHz frequency response courtesy of 5.25-inch kevlar woofer and 1-inch silk dome tweeter.

Supplier's Notes:
Satisfy your craving for powerful, full-impact sound with YU6. Armed with a formidable Class D amplifier pumping out 200-Watt peak power, YU6 will have you questioning what it really means to be loud. Its 5.25-inch Kevlarr drivers and 1-inch silk dome tweeters inject detailed sound into every square inch of living space, evoking emotions that can only be expressed with an ear-to-ear grin.

High-performance materials. Exceptional sound.
YU6's 1-inch tweeters are made from silk to deliver a high-frequency range that is bright and refined. Their dome shape improves sound dispersion to ensure your ears capture every sound, regardless of where you are in the room.

Unmatched connectivity.
Inspired by an equal appreciation for digital and analog, YU6 gives you the freedom to enjoy all your devices. Connect a turntable via a built-in phono preamp, transmit high fidelity audio from your computer or TV with Optical TOSLINK, or sit back and enjoy your newly curated playlist with Bluetooth 4.0. With five inputs and a subwoofer output, YU6 brings all your sound to life.

Throw on your favorite record.
YU6 comes equipped with a built-in phono preamp, allowing you to easily connect any vintage or modern-day turntable. Toggle between line-level and phono with a simple flip of a switch, and reduce noise using the provided ground terminal.

Play tunes from the palm of your hand.
Featuring integrated Bluetooth 4.0 with Qualcommr aptX technology, YU6 lets you stream high-quality audio directly from any Bluetooth-enabled device. Sit back and enjoy your carefully curated playlist from anywhere in the room.

Upgrade your desktop setup.
Take your desktop setup to the next level by connecting YU6 to your computer via the RCA, AUX or Optical TOSLINK inputs.

To reduce vibration and improve soundstaging, use YU6 with SP6HD desktop speaker stands.

Bring your movies to life.
Enhance any cinematic experience with high-fidelity sound by connecting YU6 to your TV via one of two optical TOSLINK inputs.

To ensure your speakers remain stable and properly positioned, place them on SP floor stands.

Take control of your sound.
Packed with functionality, the YU series remote makes listening to audio more convenient. Quickly switch between sources, tune your sound to fit your space, and control playback while streaming via Bluetooth.

Never miss a beat.
Automatic standby and power-up mode conserves power when you're away and continues playback when your music starts playing.

Use the provided USB charging port to conveniently power your phone, smart home or casting device directly through your speakers.

DRIVERS
1" Silk Dome Tweeters
5.25" Kevlarr Drivers

AUDIO
Class D Amplifier
200W Peak Power (100 Watts Total RMS)
Frequency Response: 50 Hz - 20 kHz

INPUTS
3.5mm mini-jack AUX
RCA with Phono Switch
2 x Optical (TOSLINK)
Bluetooth 4.0 with Qualcommr aptX

OUTPUTS
Subwoofer
USB Charge 5V 1A

WHAT'S IN THE BOX
Remote with Batteries
Power Cord
Speaker Wire (16")
3.5mm Auxiliary Cable (6.5")
8 x Rubber Feet
Manual

WEIGHTS & MEASUREMENTS
Dimensions (each speaker):
6.9" W x 8.1" D x 10.7" H (17.5 x 20.5 x 27.2 cm)
Net Weight (active): 11.4 lb (5.2 kg)
Net Weight (passive): 8.7 lb (4.0 kg)
1/4"-20 Threaded Mounting Hole

Notes: Proper creative stuff with this one. Lush, characterful stereo reverb with CV control, distortion, pitchshifting, a freeze button and more. Oh, and it's got user-customisable DSP firmware for good measure.

Supplier's Notes:
Desmodus Versio is Noise Engineering's take on a synthetic-tail generator reverb. In only 10hp, it features true stereo in and out, seven CV-controlled parameters, and three reverb modes. Desmodus Versio's feedback control sets the length of reverberation, from short echoes through infinite regenerations.

At its max, the reverb ducks when it receives input, useful for creating sidechain ducking and atmospheres for percussion. The different reverb modes offer even more sound options with clean, distorted, and pitch-shifting shimmer settings. The FSU button acts as a freeze and also creates some noise to stimulate the reverb when there is no external input.

Desmodus Versio isn't just a reverb, though: it's a DSP platform. Its firmware can be changed via USB, so users can load future firmwares onto it or develop their own with upcoming open-source support.

With Desmodus Versio, Noise Engineering continues their tradition of supporting conservation:a portion of proceeds from every Desmodus Versio sold goes to Bat Conservation International. Find out why bats are not only cool but also an important part of our ecosystem at Bat Conservation International's website, batcon.org.

Notes: A multi-voice synthesizer that will track your guitar for tight monosynth leads, complex chord polyphony, or multi-note sequenced arpeggiation. All without any special pickup installation. Just put it on your board and discover your own reality. The Enzo isn't limited to guitar; use it on any instrument whether drum machine, vocals or other synths. Completely transform your input signal and synthesize. Use the full synth palette of multimode analog style synth filters, ring modulation, envelopes and much much more to drive punchy, thick synth textures. Or, explore an altered state of your pure instrument signal by transforming it with pitch, time and modulation effects. Plug in to a revelation generator.

Premium quality 24 bit A/D and D/A

32 Bit floating point DSP hardware

Premium low noise Analog signal path throughout

Digitally controlled Analog Dry path for wet/dry mix

Analog Devices JFET input circuitry

Selectable True Bypass (Relay) or Analog Buffered Bypass

Durable translucent coat of vibrant gold over brushed aluminum

Current draw < 150 mA

Dimensions - 4.25" wide, 4.5" long, 2" tall

Notes: Inspired by Vangelis' majestic soundtrack for the sci-fi masterpiece Blade Runner, Mercury7 is designed to send both humans and androids into an eternal dream state with its wealth of stunning reverb algorithms.

From subtle plates and huge cathedrals to massive building soundscapes, swirling modulation, epic auto-swells and cascading shimmering pads. Whether you're looking to capture the sound and feel of well-known earthly spaces, or that of huge starlit galaxies far away, the Mercury7 is sure to deliver!

Meris has left no stone unturned in their journey to bring ultra-advanced studio reverb capabilities to your pedalboard. The Mercury7 takes everything that made the original and highly regarded Mercury7 500-series studio rack-unit amazing and distils it all into a compact, sturdy and super intuitive pedal fit for any rig and instrument out there.

Mercury7 sports two different reverb algorithms (Ultraplate and Cathedra), which alone deliver a superb range of ambient tones. Now throw in the ability to modulate, pitch-shift, swell, sustain and EQ the reverb in a million different ways via its rich control set and ALT functions and you have a reverb pedal that has your back whether you're going for smooth on-stage ambience or otherworldly sound designs that could easily form the backdrop to your favourite movie.

In addition, Mercury7 holds one of the most impressive stereo reverb images ever made, vast MIDI capabilities and the ability to seamlessly morph between sounds via an external expression pedal. Mercury7 is in essence way more than just another reverb pedal. It's a deep and highly musical creative instrument in its own right.

Premium quality 24 bit A/D and D/A

32 Bit floating point DSP hardware

-115 dB Signal to Noise Ratio (typical)

Premium low noise Analog signal path throughout

Auto Swell Envelope (variable and foot-switchable)

Analog Devices JFET input circuitry

Wet/Dry signal mix occurs in the Analog domain

Selectable True Bypass (Relay) or Analog Buffered Bypass

Durable transparent blue powder coat over brushed aluminum

Current draw < 150 mA

Dimensions - 4.25" wide, 4.5" long, 2" tall

Notes: Cleverly versatile MIDI foot controller designed for hands-free control of instruments, effects and software. Trigger patches, tap tempo, mute and unmute tracks, or perform your music in other innovative ways.

Supplier notes:
You've never had this much control over the beat, and it's all with your feet.

This is the only MIDI Footswitch built from the ground up to work with the BeatBuddy. It ships with a BeatBuddy Mode working right out of the box to boost your BeatBuddy with the following abilities:

Hands-free content control! Never bend down during a show to change a song again!
The ability to choose song parts out of order, including going to the past part.
Single BPM tempo adjustment.
Double time.
Half time.
Easy to format expression pedal tempo control.
Live tap tempo.
Expanded accent hit options including clap, snare, tambourine, hi-hat, and kick.
Single-press stop.
AEROS LOOP STUDIO AND MIDI MAESTRO
Experience full control over your live sound. This is the best MIDI Controller for live song and loop creation.
The MIDI Maestro also features an Aeros Loop Studio mode. It works right out of the box to boost your Aeros Loop Studio with these abilities:

Hands-free song control.
Single-press track muting/unmuting.
One-press undo/redo.
Single-touch new song part recording.
One-touch new track recording.
Mute/unmute any track (not selection specific).
Play song parts out of order.
MIDI MAESTRO AND YOUR GEAR
The MIDI Maestro puts the full power of MIDI into a package that's easy for anyone to use. It's the first MIDI Pedal controller that lets musicians skip on reading lengthy MIDI manuals and just jump right into playing. On top of being easy to use, it has great depth for those willing to explore its features.

With preset in app commands, easy customization, and presets for popular gear, the MIDI Maestro is the premier choice in MIDI Footswitches. Further, there's no stress about pressing the wrong button thanks to the built in displays. In addition, with 10 active pages per preset, and the ability to send up to six MIDI commands in a single press, you won't find yourself limited.

Notes: Well on its way to becoming a cult favourite already, Empress's Zoia brings modular synthesis to a compact pedal format. Create effects, synths, controllers or modules to integrate with other instruments.

Supplier's Notes:

The ZOIA is basically a modular synthesizer in pedal form. Instead of being a delay effect or tremolo, the ZOIA provides the modules necessary to build a delay or tremolo from the ground up. But since you're the one building it, you can make it do whatever you want. With the ZOIA you can build your own custom effects, synthesizers, midi controllers, and virtual pedal boards. And to make life a little easier, these modules have been created for all your standard guitar effects. So for instance, if you want a phaser, you can just plop down a phaser. You don't have to break out the textbooks to learn that they're built out of all-pass filters. (Of course, if you're a nerd like us, you can use the ZOIA to build them out of all-pass filters).

Input Impedance: >= 1M ohms
Output Impedance: 100 ohms
Frequency Response (-3dB): 10Hz - 23.4kHz
Total Harmonic Distortion: 0.22%
Dynamic Range: 105.5 dBA
Input Headroom (no pad): +0.5 dBu
Input Headroom (6dB pad): +5.7 dBu
Input Headroom (12dB pad): +10.8 dBu
Output Headroom: +16.2dBu
Power Input Connector: 2.1mm Barrel Connector
Power Input Voltage: 9V DC (center negative)
Required Current: 300mA
Height (enclosure only): 1.75"
Height (including controls): 2.625"
Length: 5.7"
Width: 3.75"
Weight: 1.5lbs

Notes: Brilliantly powerful trigger module, capable of acting as a master clock and a sequencer, generating gate signals and pulses. Good hands-on control options for live performances.

Supplier's Notes:

The Trigger Riot is a multipurpose trigger module that makes ultra complex patterns of gates triggers and clock pulses. The Riot covers a lot of ground in any Eurorack system from the master clocking for your entire system to algorithmic generation of pulses for envelopes, step sequencers, drums and accents that can venture into highly complex territory driven by simple yet powerful logic and algebra with a dash of pseudo randomness for some unpredictable results.

The user interface allows a great deal of control over pulses with each knob acting as a clock divider, clock multiplier, step injector, time shifter, clock shifter, pulse-width modulator, and an arithmetic probability processor. Now take that control and multiply it by 16 and feed it into 8 outputs for maximum Trigger Riot madness!

Furthermore the interface features a master clock knob, push switches to mute unmute and select rows, and multiple switches to configure, adjust, create loops and save your work for later recall from memory banks.

Trigger Riot integrates nicely in the studio with non-volatile memory, generous synchronization options with external gear including sample accurate sync with DAWs, smart synchronization to other Tiptop modules using SyncBus, and DIN Sync for vintage gear. A precise internal tempo clock generator with tap tempo and BeatSync to manage precise changes round out the features.

Notes: PreSonus Quantum 2626 is the fastest and best-sounding interface on the planet, thanks to the jaw-dropping speed of Thunderbolt 3, 8 front-mounted premium PreSonus XMAX analog mic preamps, and pristine ADA converters.

The PreSonus Quantum Thunderbolt Audio Interface is a 26x32 thunderbolt 2 ultra-low-latency audio interface. The Quantum Thunderbolt Audio Interface includes two combo mic/line/instrument inputs and six combo mic/line inputs, with each mic input featuring a digital-controlled XMAX preamp. The versatile design allows you to daisy-chain multiple units to expand your I/O up to 96 in and out connections. The PreSonus Quantum features a wide range of analog and digital connectivity making it one of the most comprehensive high-end interfaces on the market. The interface also operates up to 192kHz for ultra-high-definition mixing and recording.

With a barely measurable round-trip latency of less than 1 ms*, it's no wonder Sound on Sound magazine dubbed Quantum-series Thunderbolt audio interfaces the "fastest audio interfaces on the planet". Superb high-definition digital conversion and the ultra-transparent analog XMAX mic preamp design mean that your audio will always sound its bestiwhether you're recording with or without your favorite plug-ins engaged in real-time.

Every design decision during Quantum 2626 audio interface's engineering was made with one goal in mind: blazing-fast speed without any sonic compromise. The Quantum-series proprietary Thunderbolt driver was written from the ground up to deliver ultra-low-latency performance while maximizing efficiency. Cutting-edge 24-bit, 192 kHz converters with 115 dB of dynamic range and superior low-jitter clocking- coupled with our ultra-transparent, pure analog XMAX preamps- result in superb audio quality with the lowest round-trip latency of any audio interface available (< 1 ms).

Audiophile-grade digital converters, low-jitter clocking, and transparent preamps add up to a superior recording and listening experience. The Quantum 2626 audio interface operates at up to 192 kHz for ultra-high-definition mixing and recording. High-quality converters on every input and output provide 115 dB of dynamic range to capture complex musical harmonics smoothly and naturally with no audible distortion. And our lauded XMAX Class A analog microphone preamps deliver incredibly high headroom, deep lows, smooth highs, and a rich overall sound so you'll hear every breath, transient, and detail in your recordings.

Impressive speed combined with stunning sound quality means that the Quantum Thunderbolt audio interface is an ideal recording solution for any size of studio. Need more mic preamps? Connect the PreSonus DigiMax DP88 to your Quantum interface's ADAT/dual S/MUX ports. Once synced, the DigiMax DP88 preamps can be remotely controlled via Studio One or UC Surface. Want to insert your favorite gear? The Quantum 2626 features two direct preamp outputs with dedicated returns, so you can insert your favorite analog compressor and your favorite plug-ins with ease.

While compatible with any macOS or Windows recording application, the Quantum 2626 ships as a complete recording studio with Studio One Artist music production software included. Easy to learn, Studio One enables you to compose, record, and produce without getting distracted by the tools. Need a new loop or sample for your latest production? Studio One lets you shop, audition, and purchase new content right from your production environment- including powerful extensions for Studio One like the Presence XT Expansion packs and the PreSonus Channel Strip Collection.

Industry-leading speed and pristine audio quality combined with jaw-dropping expandability are the hallmarks of the Quantum interface design. Record and monitor from your favorite DAW with any plug-in engaged. Insert your favorite outboard analog gear with ease. Regardless of your studio's size, Quantum audio interfaces will streamline your recording process- you'll make better music, faster.

Notes: The Allen & Heath ZED-14 is a fantastic entry-level mixer for small bands, solo performers or AV applications. Its comprehensive feature set, compact size and fine lines combine to make it one of the best small mixers around. Provided with 6 mic or line inputs, 4 stereo inputs with EQ, there are an incredible 157 controls on the front panel of the ZED-14.

This is a mixer for anyone, from entry-level to professionals, who appreciates fantastic sound, rugged build quality and imaginative feature sets. It'll be equally happy running your gig on stage, recording live or mixing down in your studio at home.

USB AUDIO FLEXIBILITY
Getting audio to and from a computer easily is now a common requirement for live sound and music production. The way this has been implemented on ZED is super-flexible and super-easy! No longer do you need to fiddle around the back of your PC to get to the soundcard inputs, only to find that the levels are all wrong and noisy. Just plug in a USB lead to your ZED, select the USB routing on the mixer and the device on your computer and that's it! CD quality audio to and from your PC or Mac. Switches and connection through jack socket terminals provide different send/return configurations:-

SEND OPTIONS
1) Main Mix Left + Right (Post-fade)
2) Main Mix Left + Right (Pre-Fade)
3) Auxes 1-2
4) Auxes 3-4

RETURN OPTIONS
1) To Stereo 3 channel

ZED-10 features a responsive 3-band, swept mid frequency EQ design which utilises MusiQ- with optimised slope (or Q factor) for equalising individual instruments.

Based on the proven pre-amps from the hugely successful PA series, ZED-14 has DuoPre pre-amps, which use a two stage design, with carefully controlled amounts of gain in each stage. When amplifying the signal from the XLR input, the gain range is huge - 69dB of range to be exact - and is very evenly distributed around the gain control, meaning better control of signal level. Most of the gain comes from the first stage, so unwanted noise is kept to a minimum. Line level signals are simply plugged into the second stage of the pre-amp by using the line input jack socket, which has the great advantage of less noise when using the line input and also matching to a higher input impedance.

Notes: Arturia's 88-key controller is designed for those who place the emphasis on keyboard quality and feel. Piano-style hammer action makes it a nice choice for serious players.

Supplier notes:
Creating music in the digital world can be difficult. So many options, so many new things to learn. KeyLab Essential lets you focus on what's important.

8 pads, 9 rotaries, 9 faders, and an expressive keyboard, but so, so much more. Music is at the heart of this controller. Every aspect of KeyLab Essential has been carefully chosen to give you the best possible experience when creating and performing. KeyLab Essential makes navigating inside your recording software a breeze thanks to the dedicated DAW Command Center, and makes browsing your presets an exciting and inspiring experience.

Spend less time with a keyboard and mouse, and more time creating, performing, and playing.

The KeyLab 88 is a professional-grade 88-note MIDI keyboard controller designed with the working musician in mind. Featuring a new hammer-action keybed from Fatar and deep integration with our award winning Analog Lab software, the KeyLab 88 is unique with its robust, solid metal construction and classic wooden side panels.

An extensive array of controls, a stylish yet amazingly lightweight design, and brilliant integration with laptops and tablets: KeyLab 88 is perfect for modern keyboard players, pianists, demanding stage performers, and professional producers who will not compromise on quality. KeyLab 88 sets a new standard in professional controller keyboards.

As a professional hybrid synthesizer, KeyLab 88 offers the immediacy of a hardware synthesizer combined with the flexibility of a software-based solution.

Thanks to the top quality, hammer-action Fatar keybed, the KeyLab 88 is the ideal companion for demanding performers.

Notes: Amazing all-rounder from one of the most creative brands in the controller market. Compact 37-key format packs in polyphonic sequencers, MIDI and CV outputs and great performance options.

Supplier's notes:
If you prefer keys to pads, you're in for a treat. KeyStep Pro features a great-feeling 3 octave keyboard with velocity sensitivity and aftertouch. Letting you fully articulate your musical ideas, this expressive little sequencer truly puts the power at your fingertips.

KeyStep Pro works the way you want it to, and removes the barriers between you and the music you want to create.

Version 2.0 of the free Firmware update (July 2021) has these enhancements:

Global transpose - Transpose multiple melodic tracks at the same time

Global value offset - Apply a relative offset for any of the 5 main controls for every step across the selected track pattern

Recording Arpeggios in sequences - You can now record arpeggios into a sequence

Recording Chord Mode - You can now record 'Chord Mode chords into a sequence

Arpeggios while stopped - You can now create and play arpeggios while KeyStep Pro isn't playing

MIDI Thru - MIDI Out 2 can now be set to Thru mode

Mono Mode: The mono mode has been refactored for a smoother experience

Arpeggio swing - You can now add swing amount to arpeggios using Shift

Step Listen - Trigger sequence steps without playing a sequence so you can preview your notes

Various workflow and UX improvements

Bug fixes - Various improvements to workflow and functionality

Notes: Analog Physical Modeling Engine with multiple synthesis and oscillator types.

- Each oscillator type has flexible LFO and ADSR routing plus unique TEXTURE and MOD controls

Onboard effects processor with five types add depth to your sound.

- The effect types are: OFF (effect bypass,) Delay, VCM Phaser, VCM Chorus/Flanger and Distortion.

8-note polyphony:
Allows complex chords and pads or switch to mono Mode for fat synth bass or solo leads.

Control:
Based on the FS action found on the flagship Motif XF, HQ (High Quality) Mini Keys provide premium feel and response for fast, accurate and natural playing.

Looper:
Integrated Phrase Looper: capture song ideas or just jam.

Mobility & Connectivity:
- Speakers

2W 3cm stereo speaker system lets you play any place, any time.

Specially designed bass reflex port technology enhances bass response for full, rich sound.

- USB

USB "TO HOST" allows MIDI connectivity to your USB-equipped computer or iOS device.

- Audio output

Dual 1/4"unbalanced line outputs provide connection to mixers, audio interfaces, DI boxes and more.

- Audio input

A 3.5mm aux line input lets you connect and hear mobile devices, tablets and more through the instrument.

- Controller

Continuous controller pedal input for volume control.

Battery powered:
Uses six "AA" batteries with five hours of life.

Create your Soundmondo. Inspire and be inspired:
Soundmondo is a free sound sharing community that lets you discover, create and share reface Voices and Set Lists using Google Chrome any place, any time you're online.

Powered by Web MIDI, Soundmondo is simple to use - just connect reface to Chrome and you're ready to create or start browsing.

Notes: The RP-2000 MK2 is a dependable turntable for prospective DJs. The MK2 version features several improvements, including a newly developed top panel construction and improved metallic buttons with enhanced feel.

Quality direct drive motor and precision-engineered die-cast platter:

Compared to belt-driven turntables, the RP-2000 MK2 transfers its motor force directly to the drive hub - this way a higher torque generates power faster on the precision-engineered platter with minimal wow and flutter. The adjustable pitch control with a range of +/- 8% is suitable for the finest pitch adjustments.

Statically balanced S-shaped tone arm:

The RP-2000 MK2 features a statically balanced s-shaped tone arm with hydraulic lift and anti-skating mechanism. Thanks to the universal SME connection, a large number of pick-up cartridges can be connected.

Newly developed top panel and sturdy housing design:

The new deep-black metallic top panel is equipped with metallic buttons for start/stop and speed settings. The improved touch upon hit offers a clear haptic feedback. With the push of a button the aluminium target light can be extended, so that the needle position can be seen in dark surroundings. The sturdy construction with optimized damping features and shock-absorbing feet improve isolation from unwanted vibrations.

With pick-up and headshell:

The RP-2000 MK2 comes with the high-quality OM Black pick-up, handmade by Ortofon in Denmark, pre-fitted to a headshell ready for immediate playback.

Notes: Improving feel and workflow, and making the best of hardware and software available in one place, Console 1 Fader allows you to raise the sound quality bar to new heights. Mixing a masterpiece isn't easy, but with Console 1 Fader there's no limit to what you can do. Now's the time.

Ten touch-sensitive 100 mm Alps motorized faders give premium professional feel and feedback, while the weighty powder-coated steel chassis means durability and substance in a sleek Scandinavian design.

Fader includes two console emulations (Tube and Discrete). Way more than a simple controller, Fader enriches the sound of your tracks in the same ways as a true analog console.

Riding faders is muscle memory for many mix engineers. For those of us who play the desk like an instrument, Console 1 Fader gives quick and intuitive control over volume, saturation, filtering, and much more.

The Console 1 mixing ecosystem is so much more than a simple DAW/plug-in controller. It's an efficient, elegant, and amazing-sounding modern mixing solution, combining hardware and software to give you the best of both worlds: the versatility, affordability, and usability of in-the-box mixing, alongside the workflow, feel, and focus dedicated hardware can bring.

Console 1 Fader can be used alone, or in combination with the original Console 1 channel strip controller for a tight 'complete desk' experience. You can even use multiple Console 1 Fader units to build the ideal workflow for your specific studio.

There are many ways to mix a masterpiece, but riding faders is a matter of muscle memory for a lot of us. And for good reason - reaching out and grabbing five or ten different sounds or groups at once, and quickly adjusting, listening, adjusting, listening, balancing... it's a full-body discipline, and software alone can't come close.

Tapping into the same purpose-designed software environment as the original Console 1 channel strip controller, Fader brings new levels of control over the wider world of your mix. You can ride up to ten channels at once, working volume, high-and-low-cut filter values, drive and drive character (modeled desk saturation), and more. Then page up for ten more channels. And ten more, until you have easy access to your whole mix, even when tracks number into the hundreds.

Expandable with world-class sounds
Because all the audio signal processing happens in our award-winning component-modeled software, you can switch out the 'circuitry' of your console instantaneously for a different desk sound across your whole project, or even channel by channel.

In addition to the two analog console sounds Fader ships with, you can purchase any of our Console 1 channel strips and use those classic desk sounds with Fader.

Selected features

Fader modes
Fader allows you to quickly and intuitively control track volume, drive level, drive character, input gain, low cut, high cut, and up to three send levels, all from the same high quality motorized faders.

Transport controls
The three assignable buttons work by default as basic transport controls for the major DAWs, but each can be assigned to a keycommand of your choice (e.g. CTRL+Z), for whatever use you can imagine.

Encoder
Mounted on a high-grade all-metal potentiometer, Console 1 Fader's single encoder offers control of pan per track, but also unlocks a powerful stereo spatialization tool, to widen or consolidate your individual tracks, situating each sound perfectly in your mix.

Layer mode
With our innovative new 'Layer Mode' you can create layers of tracks, putting many levels of mixing at your fingertips. Low cut all your guitars at once, or saturate your groups early on for a top-down effect in seconds.

In short
A 10-fader approach to Console 1, our hybrid hardware/software mixing ecosystem
High quality hardware, designed and built for both feel and function
Take fast and intuitive control of volume, saturation, filtering, and more
Two awesome-sounding component-modeled console emulations included
Expand your sonic options with Console 1 expansion channel strips (sold separately)
'Layer Mode' allows you to organise and affect your mix in powerful new ways
Spatializer tool offers fast per-channel control of stereo width
Works with all major DAWs straight out of the box - no MIDI-mapping required
Use alone, or in combination with the original Console 1 channel strip controller

Notes: Tone is a quad, voltage controlled filter with low pass and band pass outputs. Its four channel architecture enables the intuitive patching of shimmering, polyphonic textures. The 24dB slope provides a warm, buttery character. Self oscillation allows each channel to double as a sine wave oscillator with v/oct tracking across four octaves. Cascade OTA topology. A perfect match for the Chord.

Notes: Sound:
- 4-operator FM Sound Engine offers dynamic and expressive additive synthesis

- A new feature of this engine is continuously variable feedback on every operator allowing for a wide-range of sound creation

- Two programmable effects blocks with seven effect types per block:
(The effect types are: VCM Touch Wah, VCM Flanger, VCM Phaser, Chorus, Delay, Reverb and Distortion)

- Multi-touch control interface gives direct access to four simultaneous parameters

- 32 Voice memory locations allow storing and recalling favorite Voices

Control:
- Based on the FS action found on the flagship Motif XF, HQ (High Quality) Mini Keys provide premium feel and response for fast, accurate and natural playing

- Sustain pedal input allows the sustain function for all FM generated sounds

Looper:
Integrated Phrase Looper: capture song ideas or just jam.

Mobility & Connectivity:
- Speakers

2W 3cm stereo speaker system lets you play any place, any time.

Specially designed bass reflex port technology enhances bass response for full, rich sound.

- USB

USB "TO HOST" allows MIDI connectivity to your USB-equipped computer or iOS device.

- Audio output

Dual 1/4"unbalanced line outputs provide connection to mixers, audio interfaces, DI boxes and more.

- Audio input

A 3.5mm aux line input lets you connect and hear mobile devices, tablets and more through the instrument.

- Controller

Continuous controller pedal input for volume control.

Battery powered:
Uses six "AA" batteries with five hours of life.

Create your Soundmondo. Inspire and be inspired:
Soundmondo is a free sound sharing community that lets you discover, create and share reface Voices and Set Lists using Google Chrome any place, any time you're online.

Powered by Web MIDI, Soundmondo is simple to use - just connect reface to Chrome and you're ready to create or start browsing.

Notes: Mid-sized recording option with a bit of everything: analogue mixer, audio interface, built-in stereo recorder plus versatile digital effects. All you need in a single box.

Supplier's notes:
Don't let the classic analogue mixer design fool you - the StudioLive ARc-series mixers were built to record. With a pristine analogue front-end, high-gain XMAX-L mic preamps, and a 24-bit, 96 kHz, USB-C compatible USB 2.0 audio interface, its hybrid design makes it simple to record studio productions and mix live shows from a single intuitive console. Add in a musical 3-band analogue EQ, mic/line boost for low-level vintage synths and broadcast microphones, all-new digital effects with rich reverbs and lush delays, Bluetooth connectivity, and a stereo SD recorder... and you have a mixing and recording powerhouse that fulfils the needs of both modern musicians and content creators.

A full-featured audio interface:

The StudioLive AR12c audio interface operates at up to 96 kHz for high-definition mixing and recording. Record each of the 12 inputs, plus the main mix for even more flexible recording options. Play back up to four streams for monitoring previously recorded tracks - plus a click. Eight lauded XMAX mic preamps provide all the gain you need to capture even the most subtle details without adding any extra noise. The analogue mixer front-end makes connecting your gear to your computer intuitive, and creating monitor mixes is quick and easy. With a USB-C compatible connection, your StudioLive AR12c is ready to use as an audio interface for nearly any computer.

The channel that does it all - even Bluetooth connectivity:

The unique Super Channel can handle four stereo sources at once, making it easy to integrate consumer devices into your studio workflow. Connect a turntable to the RCA inputs, use the 1/8-inch stereo input to plug-in your smartphone, or forget the cable and connect it via Bluetooth wireless technology. You can also toggle between a stereo playback stream from your computer and playback from the onboard SD recorder, making rehearsal a snap.

A complete recording solution for studio and stage:

The StudioLive AR12c audio interface and analogue mixer is tightly integrated with state-of-the-art recording software to help you realize your creative vision. Record multitrack live performances with one click thanks to PreSonus' Capture live-recording software. Create complete studio productions with our award-winning Studio One Artist DAW. With two professional recording applications included with your StudioLive AR12c, you're ready to record right out of the box.

Stereo recording without a computer:

Imagine you're rehearsing with your band and want to record your session to analyse later. Or perhaps you're in the middle of a songwriting session and want to capture your ideas as quickly as they come to you. Either way, the StudioLive AR12c's stereo SD recorder has you covered. Insert any SD/SDHC card and you're ready to record your main mix to listen to later, so you'll never forget a great song idea or an amazing guitar solo. Doing mobile interviews for your podcast? Leave the computer at home and record straight to SD.

Effects without latency:

Monitoring with reverb and delay helps to create better recordings. Any vocalist or guitarist will tell you that a little reverb makes them feel more comfortable while performing. The StudioLive AR12c mixer's onboard effects processor lets you add high-quality reverb, delay, or chorus to any channel for a professional monitor mix. Like what you hear in your headphones? Record the Main Mix and capture the effects mix, too - with or without the dry channels - to blend with your multitrack recording. Experiment in post-production to your heart's content.

All the connections you need with a familiar look:

Packed with all the connections and controls needed to mix and record in the studio and on the stage, the StudioLive AR12c is the ultimate recording solution. The four mono channels and four stereo channels include a musical three-band EQ, plus one of PreSonus' famed XMAX mic preamps. Two dedicated monitor mixes with balanced outputs provide your musicians the custom mix they need. The USB-C compatible connector ensures your StudioLive AR12c audio interface will be the centre of your studio for years to come. And with high-resolution 96 kHz recording, a full complement of connections, and an instantly familiar workflow, the StudioLive AR12c is the perfect recording and mixing solution for the modern musician and content creator.

Notes: The RESONANT EQUALIZER (EQ) is a unique ten-band filter designed specifically for electronic sound synthesis and processing. Except for the top and bottom frequency bands, the bands are spaced at an interval of a major seventh. The Resonant Equalizer is designed to produce formant peaks and valleys similar to those in acoustic insstruments.

There are three equalized outputs: the two COMB outputs provide the sums of the two alternate filter bands, while the two top outputs are the (identical) mix of all filter bands. Please note that there is no sharp separation between the bands, moving any frequency knob will have an influence on both COMB outputs. This equalizer is special in that the bands can be set to be resonant: when the knobs are in the middle position, the response at the main EQ Output is flat. When the knobs are positioned between the 9 and 3 o'clock position, up to 12 db of boost or cut is set at the band. If the knob is set beyond the 3 o'clock position, the band will become resonant, simulating the natural resonance of acoustic instrument formant structures. Below the 9 o'clock position, increased band rejection is achieved.

The Random*Source version of the filter is a licensed and authorized adaption of the legendary Serge equalizer for Eurorack. It adds an input mixer with 2 inputs that can be built/used to attenuate or amplify/distort the input signal(s) before they are sent into the EQ and a Feedback section (knob and phase switch) which allows to feed back the output signal or the inverted output signal (depending on the Phase switch). Adding inverted feedback leads to phase cancellation effects - unlike the "normal" feedback, level decreases and the signal thins out.

Notes: A clever approach to VCOs here. Three unevenly phased sawtooth signals are blended to create phase cancellations and unorthodox harmonics. Simple but deep.

Supplier's Notes:
Explore the sonic space of phase cancellation! Phase cancellation shapes the characteristics of all acoustic instruments. It forms the basis of chorus and phaser effects. It gives vibrancy to detuned oscillators. The vibrant sound of pulse width modulation or the roaring sound of animated supersaws are a small part of a much larger sonic space that the Triphase Oscillator is built to discover.

The Triphase Oscillator produces three different sawtooth waves at the exact same pitch but with independent phase control. These are blended in a bipolar CP3-type mixer, giving a rich waveform at the output. By blending in a wave with a positive polarity, you reinforce in-phase harmonics; by blending a wave with a negative polarity, you reduce in-phase harmonics. The phase differences between the waves distribute the harmonics from in-phase to out-of-phase. The result is a comb-filter effect, like the effect produced by an acoustic reflection, with notches and peaks spaced evenly throughout the frequency range. Conventional pulse width modulation can be obtained by blending two sawtooth waves with equal but opposite polarity. Supersaw-like behavior can be obtained by using phase CV with the same polarity for all three waves. But many other interesting spaces can be reached. For example, by setting the phases correctly you can cancel out the first harmonic and get a saw an octave higher, or cancel both the first and the second harmonic, giving you a saw an octave and a fifth above the fundamental frequency. Modulation then brings back these canceled harmonics.

The Triphase Oscillator is completely analog, built around a sawtooth core that is functionally stable and accurate but sonically alive. It has linear FM on all three waves, and an excellent hard sync that can create shredding harmonic sweeps. The CP3 type mixer gives good distortion at higher levels, allowing you to blend three 5-volt-peak waves without worrying about headroom. All CV functions at audio rate. With an LFO driving the phases, it can easily replace the classic analog three oscillator setup, and in this configuration it's one of the fattest things you have ever heard. But the Triphase oscillator is much more than a thickener, and can just as easily produce thin reedy sounds or subtly shifting harmonic drones.

Specs

Size - 18HP
Depth - 25mm
Power Consumption
+12V 50mA
-12V 50mA

Tuning Range
1.2Hz-61kHz

Tuning Accuracy
~8 octaves

Output Range (Individual)
-5V-+5V peak

Output Range (Mix)
-8V-+8V peak

Notes: Two decades in the game and the mighty MicroKorg remains a classic. Crystal version celebrates the anniversary with a fresh new look and the same punchy sound.

Supplier's Notes:
A shining homage to two decades of microKORG legacy

The microKORG was originally released in 2002 and has remained strong for two decades. Countless tracks and artists have made use of the amazing possibilities it offers and it continues to be one of the most popular choices for musicians on stage and in the studio.

The instruments that musicians recognise as "classics" are those that are loved and always in use, regardless of times and trends. The word "classic" symbolises musical instruments that are revolutionary in their field. There may be imitations of a classic, but the distinct character of the original shines more brilliantly and is only enhanced by time.

Two decades ago, the portable, battery powered microKORG was born with a radical new micro-keybed, a powerful Vocoder and ready-to-use sounds ideal for contemporary genres delivering countless hit performances, and instantly revolutionising the way musicians played. This compact sound monster introduced synthesis to a vast number of non-keyboard playing musicians and created a way of making music we now take for granted: a small keyboard resting unassumingly atop a larger one onstage, made for use by hobbyists and pros alike and finding itself front and centre of studios worldwide from the smallest bedroom to the largest pro recording facility.

To celebrate the 20th anniversary of its release, the special edition microKORG Crystal offers a unique and stunningly stylish take on this beloved synth - now a classic in its own right.

The microKORG was originally released in 2002 and has remained strong for two decades. Countless tracks and artists have made use of the amazing possibilities it offers and it continues to be one of the most popular choices for musicians on stage and in the studio. microKORG Crystal is the ultimate reincarnation of this iconic synth.

"Skeleton" type semi-translucent chassis, with matching knobs and controls

Previously unchanged, the microKORG Crystal features a new take on the structure of the microKORG, with a semi-translucent chassis that lets you see the electronics and internals. Even the controllers are semi-transparent, including the knobs, dials and wheels. As a commemorative model, the microKORG Crystal is great fun to look at from any angle, and as its name suggests, it "crystalizes" the energy and feelings of the KORG team behind its birth.

A panel with a beautiful sheen

The microKORG Crystal features a stainless mirror-finish front panel that blends perfectly with the semi-translucent knobs and dials, blurring the limits between you and your instrument and providing a cosmetic impact never seen in any other musical instrument.

Aluminium side panels for a sturdy feel

The original microKORG featured wooden side panels that suggested a retro feel, serving as an elegant accent to the analogue modelled synth engine. This new special microKORG features sleek aluminium side panels for a clean and depurated look.

Dedicated transparent carry bag

The microKORG Crystal features a stainless mirror-finish front panel that blends perfectly with the semi-translucent knobs and dials, blurring the limits between you and your instrument and providing a cosmetic impact never seen in any other musical instrument.

Specifications

Sound generation:
Analogue Modelling Synthesis System

Synthesizer program:
Multi Timbral: 2 (max, Split/Dual Mode)

Voices: 4 voices

Sound source:
2 Oscillator + Noise Generator
Multi Mode Filter (-24dB/octLPF,-12dB/oct LPF/BPF/HPF)
EG×2
LFO×2
Virtual Patch×4

Voices: 4 voices

Vocoder program

Voices: 4 voices

Sound source:
1 Oscillator +Noise Generator
EG×1
LFO×2 8
Channels vocoder
Level and pan of each channel can be edited
Formant Shift function

Programs: 128
Effects: Modulation effects (3 types), Delay (3 types), Equalizer
Arpeggiator: 6 types

Controllers
Real-Time control knob X 4 (3 level Selection),
Arpeggio ON/OFF

Keyboard: 37 Keys (mini-keyboard, keyboard has velocity)
Inputs: AUDIO IN 1,2, Level switch LINE/MIC, [AUDIO IN 1, 2 (LINE) ], [AUDIO IN 2 (MIC)]
Outputs: L/MONO, R, Headphones
MIDI : IN, OUT, THRU
Display : 3 characters×1 line with 8 segment LED
Power supply: DC 9V (AC adapter)
Power: 6.4w Max
Dimensions: 524 x 232 x 70mm
Weight: 2.4 kg (instrument only, without batteries or microphone)
Included items: AC adapter, condenser microphone, dedicated transparent carry bag

Notes: Combining the power of multi-oscillator wavetable synthesis with the percussive detail of sampled sounds, Pianophonic is a powerful hybrid synth engine featuring 8 voices of polyphony. Not limited to Piano sounds, the voice architecture of Pianophonic is extremely versatile and easy to use with the essential controls laid bare on the front panel, and the most significant CV inputs and outputs provided for full integration within eurorack patches.

Taking its inspiration from the wavetable/sampler keyboards of the 90s, Pianophonic revisits a lean and mean approach to digital sound creation but instead with 24bit 48Khz quality and fingertip control of the parameters that really matter.

With a built in SD card and an online re-synthesise utility, allowing users to create their own sound banks, the possibilities for sound exploration are limitless.

Notes: Befaco's unique GameBoy-based effects module allows you to change effects by swapping cartridges, all with CV control over key parameters. Effects include Skuara's harsh fuzz, Instruo's micro phaser and much more.

Supplier's Notes:
A crazy idea with the support of a bunch of crazy people.

A Multi FX module based on game carts!

FxBoy is a multi-FX module designed in collaboration with several talented manufacturers.

This is an effect unit with CV control over the parameters and Dry/wet control, with a Built-in CV controllable four bands EQ.

Each effect is physically hosted in a hot-swappable game cart and designed by a different manufacturer: Touell Skouarn with Skuara a harsh fuzz with overdrive, Instruo with micro Phaser, a two-flavoured Phaser, Feedback modules with a vintage Flanger, XOR with FX-Girl, a digital double effect module: Delay + Granularizer, Making sound machines with an analogue Wave folder, Tesseract with a bit crusher and Befaco Trash distortion!

What have these crazy people put in their cartridges?

Trash

Trash is a harmonic distortion that combines both clipping and folding flavours. Modes A and B will select between aggressive and more aggressive flavours!

Flanger

Analogue Wavefolder

Eskuara

AVMA
AVMA by Tesseract Modular is a bipolar VCA with one switchable wavefolder stage followed by an analogue frequency reducer. The VCA gain is x2, it can be used with i5V oscillator signals at the CV input for ring modulation effect.
Micro Phaser

Three cascaded all-pass filters, a built-in LFO and a saturator in the feedback path.

The purpose for this cartridge is to completely f&%k your phase up!

Instruo - We make sounds with the things that we make to make sounds with.

Technical Specifications

CV control over all parameters and Dry/wet
CV controllable four-band EQ, routable post or pre-effect.
Hot swap for all carts.
Selector for two different flavours of each cart.
Open specifications to design your own carts

Specs

Current needs: +12V: 125mA, -12V: 100mA, 5v: 0mA
Width: 12 HP
Depth: 35 mm (including power connector)
Aluminium, heat-treated front panel.
Designed and assembled in Barcelona.

Notes: ***B-STOCK: Box opened, but product is in excellent condition and in perfect working order***


Orobas is a dual tube amplifier that is composed of two identical units.

Each channel has two audio inputs with dedicated gain controls and one output volume control.
Thanks to clever routing, a wide variety of sounds can be created. The two channels can be connected in parallel or in series (Parallel / Series). In series connection, the output of channel 1 is still active, good for parallel signals (note: each channel output is phase-inverted in relation to the opposite input). This way, feedback can be generated by feeding back the signal from output 1 to e.g. a control voltage input.

The screen control voltage input determines the gain and the sound characteristics. Additionally, the input is normalized to INPUT 1 of the respective channel.

The Suppress control voltage input is normalized to the input signal if nothing is connected. The purpose of this input is to direct electrons reflected from the anode back to the anode. Turning the knob to the positive does not change as much, turning it to the negative slightly attenuates overtones. With a positive control voltage the change is minimal, but with a negative control voltage you can realize e.g. ducking effects and effectively switch off the tube. Audio Rate Modulation is also possible here and a bit milder than with the Screen CV, but still effective.

The evocation potentiometer controls the feedback of the second output into the first channel. The sonic performance is very much dependent on the Plate Bias switch. The Plate Bias switch effectively controls the headroom. This allows you to use the tubes in three different settings, from fuzz sound to full distortion.

*This version is equipped with other tubes than in version 1.

Tube length: 55mm

Depth: 45mm

Notes: One of the most unusual synths around, based on a rotating optical disc which functions as a sequencer. Program the built-in pulsewave synth engine or control other synths using the optional Wave Expander.

Supplier's Notes:
Taking its cosmic inspiration from star charts and ancient astrolabes, Star Song is a rotating optical disc-programmed sequencer with a built-in minimalist synthesizer.

Star Song can be used either to play its own built-in pulsewave synthesizer, or in combination with the A.M.P. electronics Wave Expander (sold separately) to drive external analogue and modular synthesizers.

How it is used

To create sequences on Star Song, the seven translucent rings (orbits) of the optical disc are marked with a marker (included) or opaque tape. The disc is removable and additional discs are sold separately, allowing for indefinite storage of your favourite sequences.

The outer six rings control the tuned note selection and note-on/off sequencing. The innermost ring controls the cut-off frequency for the built-in bandpass filter.

Disc on/off and disc direction are toggled from touch contacts on the front panel, and disc speed is controlled from the central rotary control.

Additionally, there are 1/8" inputs to control rotation speed and rotation direction with an external source.

The addition of Wave Expander makes the Star Song into an incredibly versatile Gate(6 channels) and CV (1 channel) sequencer, as well as providing the Star Song's tuned audio oscillator over five separate octave divisions (four audio and one sub-audio), 12 outputs in all to integrate into your modular system.

Multiple Star Song units can be synced by using an external clock signal, and you can even slave Star Song to your existing Melody Oracle/Wave Expander combo.

Sing the cycles of the spheres, with Star Song, a "revolutionary" new sequencer.

Tech Specs:

Disc Rotation: 0~15RPM
Panel Controls: Disc rotation on/off, disc rotation rate, disc rotation reverse.
Synthesizer: Quasi-monophonic pulsewave, 8 tuned notes, each with three octaves used in any combination. Sequenced via optical disc.
Tone Filter: Bandpass, optically-controlled.
Audio Output: 1/4" LINE (5V p-p)
AMP LINK Output: CAT 5 or 6 w/SHIELDED connector (compatible with Wave Expander and future AMP accessories only).
Motor Clock Input: 1/8" 0-12V. ON @>7.5V
Disc Direction Input: 1/8" 0-12V. CCW @>7.5V
DC input: 15VDC, 2.1mm, tip positive (US adapter included)

Notes: The Mutant Hot Glue is a versatile bus mixer for analogue effects chain design. The included analogue compressor offers series or parallel compression and a sidechain input, making it particularly well suited to drum processing. The voltage controlled distortion is based on ideas borrowed from the guitar pedals responsible for a lot of yesterday's acid style techno sounds, but improved over the guitar equivalents, and made specifically for synthesizer and drum processing. The distortion can be used in its default position, normalized to the effects send, or like every other part of the module, broken out and used elsewhere in your modular system.

Features

4 Channel Mixer with Effects Send

4 input channels, each with their own level and effects send control
Channel A mixer bypass switch and dedicated output for easy sidechain compression
Channel B is dual input, but shares level/send controls (for dual output modules, like the Mutant Hihats)
Channel C+D summed output
Main mixer output normalized to compressor input

Hi-Fidelity Analogue Compressor

Soft-knee compressor based on the same family of premium audio ICs used in some 500 Series studio gear
Dedicated threshold and compression ratio controls
Gain control dials in up to +40dB of compressor make-up gain
Compressor sidechain input for creating pumping effects
LED indicator actively displays the amount of compressor gain reduction

Voltage Controlled Analogue Distortion

A classic distortion topology reborn for modular analogue synthesizers and drum processing
In/Outputs are conveniently normalized to the module's send and return jacks
Blend control lets you adjust the mix of distorted and clean input signal
Fast responding CV input allows for complex modulation patterns and even modulating with audio signals

By default, the 4 channel mixer's output conveniently feeds into the compressor's input, giving access to easy New York style parallel compression by way of the compressor blend control. The dedicated output and mixer bypass switch for channel A allow you to use it as a sidechain source for the compressor. An effects send and return allow you to create complex effects routings within your modular system. With the number of excellent DSP and other effects modules on the market today, this makes it easy to combine modules to great effect, all within the eurorack modular domain.

Redesigned by Erica Synths in close collaboration with Hexinverter. Minor alterations were made in mechanical assembly and digital controls to address Erica synths manufacturing routines and chip shortages, but the analogue signal path is 100% identical to the original version.

In September 2022 Stacy Gaudreau - the founder of Hexinverter Electronique, announced closing down the operations. Following their announcement, Erica Synths in cooperation with Hexinverter Electronique saw a way for their incredible and truly unique music instruments to keep on inspiring musicians and finding a home in countless studios to come.
The effort and innovation incorporated in Hexinverter Electronique eurorack modules are far too great to prematurely become history. Erica Synths will take over the manufacturing, sales, and support of several Hexinverter Electronique modules. While retaining all functionality of Hexinverter Electronique modules, Erica Synths redesigned the hardware of modules and will provide support for reissue modules only.

Technical specifications

Width: 24HP | Depth: 30mm
Current draw: +70mA, -70mA @ 12V

Notes: Proper futuristic amp modelling and effects courtesy of Mooer's next-level GE1000, featuring AI-driven auto-EQ and a five-inch touchscreen. Hook up to the GE Cloud app to edit and share sounds.

Supplier's Notes:
MOOER has consistently pleased the guitar pedal market with its GE multi-effect range, and its latest addition, the GE1000, is set to be no exception. The GE1000, built with a futuristic and sleek "Walking Star" design, builds upon past GE products, offering an even larger range of guitar processing effects, preamps, amp simulators, and features than previous entries.

The GE1000 comes preloaded with an impressive bank of guitar effects and amp simulations, but this is augmented further through MNRS GE Cloud support. MOOER's MNRS files consist of IR samples from real amplifiers, facilitating authentic feeling tones that can be downloaded, uploaded, and shared via MOOER's 'GE Cloud' app for free. The GE1000 also supports third-party IR files of up to 2048 sample points, enabling further expansion of the pedal's portfolio of amp simulators.

Further adding to the GE1000's impressive amplification and tone features, the GE1000 includes a cutting-edge AI-driven automatic equalizer, a first for MOOER. This automatically adjusts a 5-band EQ based on the user's playing and music style choice, providing further possibilities for creativity whilst still providing the flexibility of a manual-controlled EQ interface.

MOOER hasn't only focused on tone and pitch with the GE1000 exclusively, which is illustrated perfectly by the integrated Groove Station rhythmic toolkit, consisting of a style-specific drum machine and a looper. These features have been designed to work both independently and in tempo synchronization, making them adaptable for all types of jam. The looper even includes automated record and count-in functions, activating the loop recording when an input signal is detected, providing a unique hands-free looping experience.

MOOER has always excelled at providing innovative UI experiences, and the GE1000 is set to continue this trend. The pedal features a 5-inch high-quality coloured touch screen designed for intuitive multi-effect workflows while keeping some fan favourites from previous GE pedals. These include the signature MOOER multi-purpose control dials, buttons, and a quick-access expression pedal.

Additional flexibility can be found within the pedal's cutting-edge control systems, including programmable MIDI ports, bundled preset management software, and compatibility with the MOOER mobile app.

This level of flexibility is matched by the pedal's audio routing solutions, which feature Bluetooth playback, USB audio interfacing, serial and parallel TRS stereo FX LOOP compatibility, and industry-standard input and output ports.

Notes: UDG have further finetuned what was already a great design concept for a flight case into one especially for the most discerning DJ/producer. Constructed from solid 9mm thick plywood, the outside is laminated in a black finished honeycomb/hexagonal "Stage Grip" pattern. The inner sides are protected with high density diamond embossed EVA foam protective padding. This extremely robust padding protects the equipment against scratches, dust or other damages, creating a unique stylish & practical finish.

Extra wide black finished aluminium profile & massive UDG logo embossed ball corners are incorporated to ensure longevity & maintaining a permanently attractive, professional design. The UDG Ultimate Flight Case Set Pioneer CDJ-3000/A9 Black Plus (Laptop Shelf + Wheels) also features built-in corner wheels with high quality in-line skate bearings for convenient transport and heavy-duty, spring-loaded handles for a secured lift & load. In addition, there is an extra notebook shelf included for your notebook, mouse and/or any other devices such as effect processor and interfaces.

UDG Ultimate Flight Case Set Pioneer CDJ-3000/A9 Black Plus (Laptop Shelf + Wheels) not only transports your complete set up easily & securely, but also facilitates devices to be setup within minutes. With these premium features incorporated, the UDG Ultimate Flight cases provide premium professional quality in a very stylish modern black coloured combination.

Colour: Black
Weight: 25,00 kg / 55 lbs
Outer Dimensions (W x H x D): 116.7 x 53.8 x 21.9 cm | 45.9 x 21.2 x 8.6 inch
Inner Dimensions (W x H x D): PLAYER COMPARTMENT: 33.2 x 42.4 x 8.7 cm | 13.1 x 16.7 x 3.4 inch
MIXER COMPARTMENT: 40.9 x 42.4 x 8.7 cm | 16.1 x 16.7 x 3.4 inch
Material: Heavy duty construction of 9 mm thick plywood
Protection: Improved powder coated and anodized hardware
High density diamond embossed EVA foam & carpeted protective padding
Dual anchor rivets with included washer
Extra-wide silver solid aluminium profiles
Secure stacking due to stackable ball corner

Extras

Convenient 80 mm space at rear for connections & PSU storage
Cable access hole with removable UDG emblem cover
Removable front access panel
Built-in corner wheels with high quality in-line skate bearings
Adjustable laptop shelf
Fits: 1 x Pioneer DJM-A9 and 2 x CDJ-3000 and CDJ/DJM models or any 12"-mixer/ CD-player models from Allen & Heath, Denon, Rane, Reloop etc. + 1 x Laptop + Accessories

Notes: Up to eight voices of digitally synthesised drums, percussion and synth sounds from this versatile module, featuring virtual analogue models as well as FM and wavetable options.

Supplier's Notes:
Flame "Fire" percussion synth module

The module is a full 8-way polyphonic drum and percussion synthesizer. It offers different digital synthesis algorithms, which can be distributed over 8 channels. The sound engine delivers virtual analog sounds as well as different digital percussion sounds, which are generated with FM, wavetable or virtual analog synthesis. It is also possible to create sim- ple monophonic bass or synthesizer voices.

During development, particular attention was paid to direct and simple usability with regard to live operation. The hardware essentially consists of two parts (which are deli- vered together). On the one hand there is the basic module with all controls, the display, connections for MIDI, 2x CV inputs and 5 audio outputs.

There is also a separate XFIRE I/O extension with sockets for the 16 analog trigger/gate/CV inputs and 3 additional audio outputs. Both modules are connected via a 60cm long ribbon cable. In this way, the XFIRE module can be installed anywhere else in the rack. The base module is therefore only 22TE wide and can also work alone without the extension as a MIDI expander.

A maximum of 8 audio outputs are available. A stereo pair (outputs 7+8), plus 6 additio- nal individual direct outputs. All outputs are freely configurable. Two pages with settings for panorama and volume are available for the stereo main out.

There is a gate/trigger input and a configurable CV input for each channel. Two additio- nal programmable CV inputs can be used for further controls. Regardless of the analog connection, the module offers full MIDI functionality. Two MIDI inputs and a MIDI output/softthru allow integration into an external MIDI setup. The firmware can be upda- ted via MIDI Sysex. The created KIT data can also be saved or exchanged.

Notes: *** This version of UTILITIES comes with PULSAR-23 style turrets designed for connecting alligator clips. ***

UTILITIES contains a set of simple auxiliary modules to expand the functionality of the PULSAR-23 drum machine. UTILITIES modules can also be used with any gear that works with CV signals (Eurorack, semi-modular synthesizers, etc.).

The modules included in UTILITIES can be divided into two groups:
1) Passive elements such as switches, resistors, capacitors.
2) Various types of amplifiers and waveshapers, linear, non-linear, controlled and uncontrolled.
Passive elements are designed to expand the possibilities of switching and controlling the PULSAR.

Linear amplifiers are needed when you need to feed a signal from a device operating in a lower voltage format to the PULSAR inputs. For example, it can be a step sequencer with an output voltage of 5 volts, while the PULSAR needs 10 volts to fully trigger the drum modules. Or it could be the output of a cassette tape recorder, which has an output of 1 volt, while for normal operation the PULSAR needs an input level of an audio signal of 5 volts. Non-linear and controlled amplifiers and waveshapers are designed to control the signal level, while simultaneously changing its spectrum, distorting its shape and adding harmonics. The circuitry of these amplifiers is very simple and based on the early developments of the transistor era, with its inherent beauty and grace.

UTILITIES connectors are made in the PULSAR-23 format on pins designed to connect the alligator clips. There are also adapters for 3.5mm Eurorack mini-jacks.

The top panel and enclosure of UTILITIES are made of PCBs, which significantly reduced the cost of the device.

There are also adapters for 3.5mm Eurorack mini-jacks. The top panel and enclosure of UTILITIES are made of PCBs, which significantly reduced the cost of the device.

The top panel and enclosure of UTILITIES are made of PCBs, which significantly reduced the cost of the device.

Power supply: DC +12 v 5.5 x 2.1 mm center plus
Current consumption: 50 ma max
Dimensions: 288 x 193 x 40 mm
Weight: 0.75 kg

Notes: *** Onyx Edition ***

Delay and granular sampling combine to create unique ambience effects, creative reverbs and glitchy chaos. Hugely versatile pedal with five contrasting programs.

Supplier's Notes:
In the high woodlands of the north, undiscovered by most inhabitants, there ruled a clan of old, mystic Treefolk. On the first new moon of spring, these Treefolk could be heard grafting limbs to grow their young - splicing bits of branches from each generation to produce the next line of Treefolk. These new beings keep the lifeblood of all who came before in their new skin. These sounds are in part very old, but in part very new. They are referred to as... Fable.

Let your storybook adventure grows with the Fable Granular Soundscape Generator. The Fable gives you five all-new programs centered around sample and chop delay algorithms to create bizarrely beautiful networks of sampled and resampled sounds. The Fable uses a powerful dual DSP architecture to combine delay programs in series with granular sampling algorithms, each with its own analogue feedback path. Find unique soundscapes ranging from smooth, flowing ambience; to bizarre, organic reverberance; to chaotic, glitchy swarms.

So, what exactly is this granular effect and why is it a magical experience when combined with delay? Granular is a digital processing technique of micro-sampling, wherein short samples called grains are read from a delay buffer. In the Fable, players can adjust these grains by manipulating their sampling length, position, and buffer size from which they're read. They can be played at double or half speed for pitch shift and time stretching effects, play them in reverse, read from multiple positions, and more, in order to achieve different effects.

It's a powerful but complex technique and Walrus Audio created five streamlined programs in the Fable that explore different aspects of its sonic range.

Programs

I. Reverse Delay into Reverse Granular

Program 1 runs a reverse delay into a reverse granular algorithm, in which sampled grains are played backwards. Reversal and re-reversal build up in the feedback paths, creating a complex and organically shifting soundscape. Turn grain size down for long, smooth reversed transients, and grain size up for stuttering reverse glitch madness.

II. Forward Delay into Octave Up Granular

Program 2 runs a forward delay into an octave-up granular program, in which sampled grains are played at double speed. Swarms of double-speed grains build up in the feedback path for bright and airy cascades of sound.

III. Analogue Delay into Octave Down Granular

Program 3 runs a warm, dark analogue-style delay into an octave-down granular program, in which sampled grains are played back at half speed. Slowed down repeats combine with analogue-style processing to create deep, thunderous footfalls and thick, murky ambience.

IV. Multi-Tap Granular into Multi-Tap Granular (Grain-Verb)

Program 4 runs two multi-tap granular algorithms in series, in which multiple samples are played back from each granular buffer simultaneously. Multiple points of sampled sound build upon each other in the feedback paths to create glitchy clouds and unique organic reverberance. Time in this program controls time-stretching of both granular algorithms, changing both the length and tonal character of the granular effect.

V. Forward Delay into Randomized Pitch Granular

Program 5 runs a forward delay into a randomized pitch granular program, in which each grain is played back at a randomly selected speed and direction, varying between pitched up double speed, pitched down half speed, normal speed, plus forward and reversed playback from grain to grain. Pitch changes with each new grain, so play with the X knob in this program to control the rate of randomized pitch modulation.

Notes: *** Onyx Edition ***

Reverb and reverse delay go to the next level with this "ambient creation machine". Two DSP circuits with analogue feedback allow you to create epic soundscapes, time-stretching effects and more.

Supplier's Notes:
Once upon a time, in a fairy tale world, there stood a hidden forest. On the eve of every full moon, magical and delicate sounds of light were heard bouncing and reverberating through the trees. These sounds carry artifacts of notes moving backward and stretching through time. They are referred to as... Lore.

Create the soundtrack to your storybook adventure with the Lore Reverse Soundscape Generator. Made up of five different programs, each utilizes different combinations of delay and reverb that feed into each other for time-warping ambient creations. Featuring two DSP chips running in series, each with their own analogue feedback path, the Lore takes you on an adventurous journey rich with themes of reversing, time-stretching, pitch-shifting, and vast ambiance.

Having two analogue feedback paths allows each program to incorporate a unique mix of affected and unaffected feedback. The two feedback paths interact and build off of each other organically, offering the user a wide array of sounds and behaviours to experiment with.

Programs:

I. Reverse Delay into Reverse Reverb: Program 1 combines reverse delay with reverse reverb with a focus on organically interacting feedback paths. Space and ambiance build as the signal is reversed, re-reversed, reverberated, and reversed again within the feedback network. Experiment with the X knob to control how reversed your delay trails are with left being least reversed and right being fully reversed. Lots of fun with big, eerie minor chords!

II. Reverse Delay into Octave Up Reverb: Program 2 is a "light reverb" that combines octave-up harmonic feedback with an expansive, airy, reverb tank to create a breathy, spacious ambiance. Use the Regen knob to introduce a playful shimmer into the reverb decay. Increase the X knob to control the decay of the reverb. It sounds especially great with delicate fingerpicking parts.

III. Reverse Delay into Octave Down Reverb. Program 3 is a "dark reverb" that combines octave down harmonic feedback with heavy filtering and harmonic distortion, to create a sound that is thick, rich, and murky. Use the Regen knob to bring a lower octave into the reverb decay. Increase the X knob to control the decay of the reverb. Add in some high gain or fuzz to alter the time-space continuum.

IV. Reverse Reverb into Forward Reverb. Program 4 is a dual reverb program, featuring reverse reverb into forward reverb, Dual harmonic feedback paths allow the user to dial in octave up and octave down, and time stretching allows for control of the size and character of the space. Perfect for instantly transforming guitar into rich ambient pads. Use the Feedback knob to add a lower octave to the reverse reverb. Conversely, use the Regen knob to add an octave up to the reverse reverb decay. Control the decay of the forward reverb with the X knob. To channel all things ambient, experiment with dynamic picking and strumming techniques with the mix fully wet for ethereal drones and pads.

V. Pitch Delay into Pitch Delay. Program 5 features two "duelling" pitch delays, which shift the input signal up and down in complementary or opposing directions, allowing the user to create intricate harmonic patterns in the feedback network. Behaves like a sequencer at higher delay times and like a harmonizer at lower delay times. Use Feedback and Regen knobs to control various amounts of pitched delay repeats. Use the X knob to change the order of the 4th, 5th, and octave intervals that the pitch delay steps through. Experiment with short staccato notes to create some very interesting rhythmic parts!

Dive / Rise - Holding down the tap tempo switch will momentarily shift the clock rate of the pedal down or up and will hold it at that rate for as long as the switch is pressed. The direction of the dive can be changed by simply pressing bypass and tap simultaneously. A green LED over tap will indicate rise is set and a blue LED will indicate that dive is set.

The Mod knob will control the amount of modulation applied to the wet signal. Holding down bypass and adjusting the Mod knob will adjust the modulation rate. The bypass LED will blink to show your set mod rate.

Specs:

The die-cast enclosure's exact size is 3.62" x 4.79" x 2.25" including knobs.
Buffered bypass.
Power requirements are 9VDC, center negative (300mA minimum).
The use of an isolated power supply is recommended for powering all Walrus Audio Pedals.
Daisy chain power supplies are not recommended.
Power supply not included.

Notes: *** Onyx Edition ***

Distortion and reverb meet in this unique pedal, sporting a joystick to tweak the sound and the option to flip the order of the two effects in the signal chain. Simple, quirky and effective.

Supplier's Notes:
Walrus Audio give you the two most quintessential effects that yield unruly amounts of power and influence to an instrumentalist: reverb and distortion. They have been harnessed and woven together for an eternity of ethereal power with The Melee: Wall of Noise. The Melee unapologetically uses a joystick to meld reverb and distortion into one massive blaze of sound. With the flip of the order switch, run the distortion into the reverb or reverb into distortion; signal chain is your call now. For the explorer, the Melee can run one of three different reverb programs Ambient, Octave, and Reverse.

In a less is more approach, Walrus Audio have intentionally decided on controls that are fun to use and will inspire a wealth of creative output. Use the joystick to control the amount of distortion by moving it up and down. Moving the joystick left and right will adjust your reverb mix. The tone and decay toggles have low, medium, and high settings. Modulation can be added to the wet signal by holding down the bypass switch and moving the decay toggle. The left position is no modulation, the middle is a slight modulation, and the right is a high modulation.

Algorithms

The Melee is equipped with three different reverb programs, which can be changed by simultaneously pressing the bypass and sustain stomp switches. Experiment with the order toggle switch to hear how differently these all react in front and after the distortion!

Ambient Reverb (Pink LED) - Huge reverb capable of massive trails and engulfing your chords into an angry wash of sound. Great for soaring melodic lines or shoegaze-driven chord progressions.
Octave Down Reverb (Yellow LED) - Similar to the Dark mode in the Slo, you'll find an eerie lower octave hovering in the reverb trail for a nice and dark atmospheric touch.
Reverse Reverb with Feedback (Blue LED) - Add reversed reverb trails back into your signal, create gentle melodies or push into reverse feedback overload. Big, slow, and sad chords love to hang out here.

Momentary

Press and hold the sustain switch to ramp up the reverb trails. Release and the trails will ramp back down to where the decay switch is currently set. The sustain switch can also latch in all three programs. Press and release the Sustain switch to capture and sustain the current reverb decay for long pad-like sounds in your wet mix. Press again to release the latch, and the reverb trail will taper off based on the position of the decay knob.

Specs

The die-cast enclosure's exact size is 3.62" x 4.79" x 3.14" (including joystick height).
Three bypass modes, DSP, DSP + True, True Bypass
Power requirements are 9VDC, centre negative (200mA minimum).
The use of an isolated power supply is recommended for powering all Walrus Audio Pedals.
Daisy chain power supplies are not recommended.
Power supply not included.

Notes: ***B-STOCK: Box opened, but product is in excellent condition and in perfect working order***


Befaco's unique GameBoy-based effects module allows you to change effects by swapping cartridges, all with CV control over key parameters. Effects include Skuara's harsh fuzz, Instruo's micro phaser and much more.

Supplier's Notes:
A crazy idea with the support of a bunch of crazy people.

A Multi FX module based on game carts!

FxBoy is a multi-FX module designed in collaboration with several talented manufacturers.

This is an effect unit with CV control over the parameters and Dry/wet control, with a Built-in CV controllable four bands EQ.

Each effect is physically hosted in a hot-swappable game cart and designed by a different manufacturer: Touell Skouarn with Skuara a harsh fuzz with overdrive, Instruo with micro Phaser, a two-flavoured Phaser, Feedback modules with a vintage Flanger, XOR with FX-Girl, a digital double effect module: Delay + Granularizer, Making sound machines with an analogue Wave folder, Tesseract with a bit crusher and Befaco Trash distortion!

What have these crazy people put in their cartridges?

Trash

Trash is a harmonic distortion that combines both clipping and folding flavours. Modes A and B will select between aggressive and more aggressive flavours!

Flanger

Analogue Wavefolder

Eskuara

AVMA
AVMA by Tesseract Modular is a bipolar VCA with one switchable wavefolder stage followed by an analogue frequency reducer. The VCA gain is x2, it can be used with i5V oscillator signals at the CV input for ring modulation effect.
Micro Phaser

Three cascaded all-pass filters, a built-in LFO and a saturator in the feedback path.

The purpose for this cartridge is to completely f&%k your phase up!

Instruo - We make sounds with the things that we make to make sounds with.

Technical Specifications

CV control over all parameters and Dry/wet
CV controllable four-band EQ, routable post or pre-effect.
Hot swap for all carts.
Selector for two different flavours of each cart.
Open specifications to design your own carts

Specs

Current needs: +12V: 125mA, -12V: 100mA, 5v: 0mA
Width: 12 HP
Depth: 35 mm (including power connector)
Aluminium, heat-treated front panel.
Designed and assembled in Barcelona.

Notes: ***B-STOCK: Box opened, but product is in excellent condition and in perfect working order***


Designed to integrate sound sources from outside Eurorack, Verbos's Real World Interface offers three channels including built-in microphones, preamps, envelope followers and a frequency detector.

Supplier's Notes:
The Real World Interface is a 3-channel external processing module intended for connecting with sound sources outside the system. The channels are oriented as vertical channel strips. The left and right channels have a built-in condenser microphone, preamp, envelope follower with variable decay and gate extractor. In addition to a preamp, envelope follower and gate extractor, the centre channel also has an Automatic Gain Control (fixed high ratio compressor), fundamental extractor (tracking lowpass filter), frequency detector and locked oscillator. Internal microphones are useful for introducing electro acoustic room sounds into the modular. Envelope followers can be used to have external signal levels effect parameters such as filter cutoff or level for building dynamics processors. Gate extraction allows external sounds such as metronomes, clicks, claps or room sounds to advance sequencers, trigger sounds or initiate other events. The Frequency Detector can extract the pitch of simple monophonic sounds but is also a semi chaotic CV source in the tradition of such modules since their introduction in the 1960's. The Locked Oscillator plays a sine wave at the same pitch as the input signal.

Size: 18HP

Notes: ***B-STOCK: Item refurbished, repaired and in perfect working order.***


Flagship model in IK's Uno Synth range, the Pro X adds extra synth power to the three-oscillator analogue design, with plenty of hands-on control and sequencing power.

Supplier's Notes:
Freedom of sound

Paraphonic dual filter analogue synthesiser

Embark on a liberating sonic adventure with UNO Synth PRO X, a powerful analogue synthesizer that'll ignite your creativity and elevate your music to new dimensions. Prepare to be inspired as you explore a world of infinite possibilities, where technology meets the timeless allure of analogue warmth.

Get creative

Featuring three discrete wave-morphing oscillators, the UNO Synth PRO X invites you to explore a vast sonic landscape. Unleash your imagination with PWM, sync, FM, and ring modulation capabilities: Your sonic palette knows no bounds.

Unrivalled sound sculpting

Discover a new realm of sonic possibilities with the UNO Synth PRO X's dual-filter design, combining classic OTA and SSI-chip-based filters. Immerse yourself in the moment as you weave intricate textures and shape your sound to perfection. Dive deeper into sonic exploration with the 16-slot modulation matrix enabling you to create intricate and evolving textures.

Sound connection

Take complete control over your music with over 30 hands-on controls, providing immediate access to your sound-shaping tools. With USB, MIDI, CV and Gate in/out options, integrating the UNO Synth PRO X into your setup is effortless.

4 kinds of effects

With 10 studio-quality FX in three slots and an analogue drive, your music will further come to life with warmth and character.

3 effects slots + analogue drive
Vintage chorus and uni-vibe
5 different delays
Hall, plate and shimmer reverbs

From sequencing to arranging

Unleash your creative potential, easily creating complex ever-evolving sequences. Try the 10-mode arpeggiator, equipped with a pattern designer to bring your melodies to life. New horizons are just around the corner with the Bassline mode, along with legato, mono and paraphonic modes, offering unprecedented expression of your musical ideas.

Advanced paraphonic 64-step sequencer
Per-step parameter recording with up to 48 parameters
Sequence randomizer that follows the scale you select
Parameter automation per step and real-time
10-mode arpeggiator with pattern designer
New Bassline mode plus legato, mono and paraphonic modes

Seamless DAW integration

With 256 user-editable presets the UNO Synth PRO X is a playground for sonic fun and exploration. Effortlessly sculpt save and recall your own custom sounds recapturing every moment of your creativity. And with the included Editor/Librarian software providing seamless control from your Mac or PC anything becomes possible. The Editor works as both a standalone application and as a plug-in inside your favourite DAW. This means you can program and play the UNO Synth PRO X just like a virtual instrument.

Designed for portability
The UNO Synth PRO X is not only a fun sound-design partner but also the perfect musical companion on the go, adapting to any environment. From backpack to mainstage, new sonic destinations will always be within reach.
Ultralight and ultraportable
PSU or USB battery pack power supply
Balanced stereo and headphone outputs

Custom travel bag available

Whether you're a seasoned sound designer or on the way to becoming one, UNO Synth PRO X is here to travel physically and sonically wherever you go.

UNO Synth PRO X Specifications

Sound generation
3 discrete wave-morphing oscillators
3 super-fast envelopes with loop and retrigger options
PWM, sync, FM and ring modulation
Dual-filter design, OTA and SSI-chip based
12 studio-quality FX in 3 slots + analogue drive

Performance tools
Advanced paraphonic 64-step sequencer
10-mode arpeggiator with pattern designer
New Bassline mode plus legato, mono, paraphonic
Audio input to filters and FXs or pass-through

Complete controls
Over 30 hands-on controls
16-slot modulation matrix
256 user editable presets
USB / MIDI / CV / Gate in/out
Backlight control and onboard factory preset restore
Advanced software control for Mac/PC

Ready for travel
Ultralight and ultraportable
PSU or USB battery pack power supply
Balanced stereo and headphone outputs
Editor/Librarian included
Optional gig bag available

Dimensions
Size (W x D x H): 33.3 x 15 x 5 cm, 13.11 x 5.91 x 1.96 in.
Enclosure: Plastic
Weight: 800 g, 1.76 lb
Power: iRig PSU-3A (included) or USB (5V/1.5A, 7.5W or above)

Package includes
UNO Synth PRO X
1x USB-C to USB-C Cable - 60 cm, 23.6 in.
Power Supply Unit
Quick start guide
Registration card

NOTE: USB power has inherent ground noise, so when connecting the UNO Synth directly to your computer via USB, you may hear more noise and interference than when the synth is connected to a USB wall charger or running via batteries. With the direct computer connection, you can reduce the USB ground noise and other interference by either using a USB isolator or a custom TRS cable into a balanced input on your preamp or audio interface where the ground is not connected at the balanced input side.

UNO Synth Pro Editor Compatibility

Computers
64-bit application. Requires a 64 bit CPU and Operating System.

Macr (64-bits)
Minimal: macOS 10.15 or later.

Windowsr (64-bits)
Minimal: Windows 8 or late

Notes: The RS-650 Echo / Reverb is a combination of the RS-310 and RS-440 which are based on the same circuit.

It offers both delay (echo) and reverb settings in one module. It is based on a bucket brigade device (BBD) with six parallel delay taps. Those six delay times have no relationship to each other and their outputs have different levels. You have to consider the reverb effect as a mixture of six different short delays what results in a dense sound. The clock frequency which scans the bucket brigade is audible and you'll have to use a low pass filter in order to eliminate or minimize it. In Reverb mode the delay time can be set between 2.5ms and 150ms and in Echo mode it spans from 75ms to 200ms.

All modules by Analogue Systems come ready to use with five years warranty mounted in the by the customer preferred rack or cabinet.

Depth: 65mm
HP : 12

Notes: Alia is a 10HP oscillator platform much like the Versio and Legio platforms. Launched in 2023 with a reboot of the beloved Basimilus Iteritas and Manis Iteritas, along with a new oscillator, Debel Iteritas, Noise Engineering is back with three more firmwares for the platform.

Separate hardware is available for each module, and a customer with any Alia module can try any firmware for free by going to the Noise Engineering Customer Portal and connecting with the included USB cable.

Cursus Iteritas Alia

Dynamically generated wavetable oscillator using orthogonal functions on a swappable oscillator platform

Cursus Iteritas Alia is Noise Engineering's take on a wavetable-inspired additive oscillator. Cursus creates sounds from a dynamically generated wavetable, then gives the user spectral controls to sculpt and modulate. Cursus has three different algorithms, based on different conceptualizations of frequency: Fourier, which uses sine waves; Daubechies, using wavelets; and Walsh mode, using the Walsh transform. All that math is hidden behind a set of friendly controls that produces an extremely wide variety of harmonic sounds, perfect for melodic sound design. Cursus has long been regarded as the gentlest Iteritas, but if you need some beef and extra low end, try mixing the suboscillator output into your patch.

CIA is available on Noise Engineering's 10HP Alia oscillator platform. Buy an Alia module and use the included USB cable to connect to the Noise Engineering Customer Portal and check out any other Alia firmware, free of charge, any time.

Width: 10HP
Depth: 22mm