Back catalogue: Studio Equipment

Notes: Three-band isolator with stereo inputs and outputs, splitting the signal into highs, mids and lows then allowing you to control level and frequency via CV for some clever sound sculpting and modulation.

Supplier's Notes:
Katowice is a stereo variable-band isolator that allows the user to manipulate a selected range of frequencies. It is the first module in a series of upcoming Xaoc Devices products designed specifically for processing stereo signals.

Katowice splits the stereo input signal into three bands: low, middle, and high. While the knobs and CV inputs define the center frequency and bandwidth of the mid band, the low and high bands are automatically adjusted so that the sum of all three is a complete signal. All three bands are passed through high quality VCAs and their stereo outputs are available separately for further processing. A stereo mixdown signal is also available.

Katowice may be used as a crossover network, a parametric EQ, DJ-style kill filter, or other band-selective applications, including multiband compression and stereo enhancement.

TECHNICAL DETAILS:
Eurorack synth compatible
10hp, skiff friendly
Current draw: +100mA / -100mA
Reverse power protection

Notes: Gorgeous stereo implementation of the classic frequency shifter sound, moving from tonal harmonics to atonal disharmony effortlessly. Separate outputs for down and up shifts, plus plenty of CV control.

Supplier's Notes:
Koszalin is a full stereo frequency shifter with two inputs and four outputs. If offers simultaneous exponential and linear through-zero control of the amount of frequency shift in 3 carefully scaled ranges (up to +/- 5kHz). Frequency shifting results in linear translation of signal spectrum producing all kinds of atonal sounds. It should not be confused with frequency scaling, also known as pitch shifting. Several stereo feedback topologies are offered with additional density control besides feedback depth, which results in spectacular stereo barberpole effects.

Through-zero modulation allows for using Koszalin's input as an FM operator. Koszalin is a digital module with a DSP behind an analog interface.

Main features:

full stereo frequency shifting
3 shift ranges: +/- 50Hz / 500Hz / 5kHz
exponential and linear through-zero inputs
internal feedback under voltage control.
10HP
12V: 140mA / -12V: 30mA

Notes: Lipsk facilitates the inversion of the individual bits produced by Drezno (or any other module connected to its input header at the back), and delivers the resulting code to its output header. Bit inversion can be manually controlled by pressing any of combination of its eight illuminated buttons, or it can be automated by patching gate signals into its gate input sockets. An active (5V) gate flips the state of the respective bit. If the button is active (bit already flipped), then the gate flips the bit again yielding double inversion (no inversion). The corresponding LEDs show the combined effect of both manual and gate actions. The bit processing logic is hardware-based, so there is virtually no latency, allowing the binary signals to be manipulated at extreme rates.

Notes: User-friendly mid/side processing module. Tweak the stereo image or split a stereo signal into mid and side elements then route out to other modules for further processing before summing back together. Powerful.

Supplier's Notes:
Minsk is a stereo image processor. It is a hybrid tool that combines digital and analog processing to facilitate advanced mid/side (M/S) manipulation of a stereo signal pair. It allows for separate treatment of the mid and side components, which affects the depth and width of the auditory scene. Minsk offers both manual and voltage control of the stereo width, as well as two dimension effects for enhancing the existing stereo image or creating a faux stereo image based on the stereo or mono input source. Minsk is especially handy during the preparation of a vinyl release or before a club concert, because it can eliminate out-of-phase low-end frequencies (high pass filter at 300Hz with the filter slope 12dB/oct, 50Hz with the filter slope 24dB/oct).

Dimensions:
6 HP

Current Draw:
140 mA +12V
40 mA -12V
0 mA 5V

Notes: Updated version of Xaoc's Moskwa sequencer module includes customisable gate/trigger sections, independent randomisation sections, built-in quantiser, slew limiter and preset storage.

Supplier's Notes:
XAOC Devices Moskwa II - compact feature-packed sequencer with preset memory and trigger patterns.

Designed with live performance in mind, Moskwa II takes inspiration from vintage analog sequencers and greatly expands on their functionality surpassing our original Moskwa rotosequencer, while retaining the same size, basic panel structure, and operation principles.

At the core of the module is an 8-step CV sequencer and a parallel 8-step gate/trigger sequencer. But there's more, much more. Besides these basic functions, Moskwa II offers more unique, advanced features like eight independent programmable gate/trigger pattern generators (one for each step of the sequence). You can treat them like sequencers within the sequencer offering another eight microsteps for each main sequence step. This allows for programming complex gate/trigger rhythmic patterns (e.g. step repeat, additional pauses, microshifting or swing effect).

Moskwa II features two independent randomization sections that give the user advanced control over the optional chaotic/random change of various sequence parameters (e.g. step order, slew and trigger probability and more). A programmable custom trigger sequence can be up to 256 steps long! Topping it all off, Moskwa II can store eight presets to be loaded at any time. All these functions allow Moskwa II to generate sequences much longer and much more complex than those produced by traditional 8-step sequencers.

Compared to the first Moskwa, Xaoc have also added a transport button for manual starting/stopping of the sequence, range control for CV output, and a flexible quantizer. Two Moskwa II units can be joined for chained operation doubling the number of available steps and preset slots. Ostankino II expander adds CV inputs for many Moskwa II functions, as well as a transpose input, clock out and individual gate/bit outputs for each step.

Specifications:

- 20hp, skiff friendly
- current draw: +40mA at +12V, 0mA at -12V

Notes: An expander for Zadar, adding one more assignable input for each Zadar channel and manual triggers.

Notes: Part of Xaoc's Leibniz subsystem, which processes signals and voltages by manipulating binary 8-bit numbers, the Poczdam allows switching between two data sources.

Supplier's Notes:
Poczdam is a binary data routing solution for the Xaoc Leibniz Subsystem. It facilitates manual and remote switching between two Leibniz data sources, modifying individual bits of the data stream, and re-clocking the data with its onboard voltage-controlled wideband oscillator or any external clock signal. Poczdam is particularly useful within complex Leibniz setups where the user needs to reconfigure the data flow between multiple modules. However, it can also be employed in small creative patches, e.g., for waveform splicing, disrupting rhythmic loops, or generating digital chaos.
To better understand the device and avoid common pitfalls, it is strongly advised to read through the entire user manual before use.

Component of the Leibniz Binary Subsystem
Routing Leibniz data
Reclocking Leibniz data
Additional CV clock generator (up to 2MHz)

6hp, 30mm deep
Current draw: +20mA/-10mA
Reverse power protection

The high quality Coal Mine black panels are available for all Xaoc Devices modules. Sold separately. Ask your favourite retailer.

Drezno is the input/output front-end of the system, consisting of an analogue-to-digital converter (ADC) and a digital-to-analogue converter (DAC), that alone can be used for manipulating analogue signals and voltages based on their binary representation.

Lipsk is a binary logic processing expander module that can flip (invert) individual bits of the digital signal representation. There are more Leibniz Binary Subsystem elements coming, with specialized and advanced sets of features.

Jena is a digital module that may be used as a flexible waveshaper for CV and audio signals, a wavetable oscillator, a Walsh function generator, or a rhythm generator.

Erfurt is a bi-directional digital counter, frequency divider. It has multiple applications: the output of the counter may be used as a phase source driving a digital wavetable, connected to other Leibniz modules it may scan waveshapes in Jena, produce stepped voltages useful for making interesting glissandi with Drezno and any VCO, generate gate patterns animating the spectrum of Odessa harmonic banks, spawn pseudo-chaotic sequences when fed back to Lipsk, etc.

Notes: Poti II expander notable features:

- per-channel input and output attenuation for the SINE and ASSGN outputs
- per-channel shape modulation with switchable destination (wave folding, shape switching, PWM)
- stores settings during a power cycle
- LED indication of the discrepancy between the stored setting and current pot position
- 4HP
- +10/-0mA from Batumi II

Notes: The module is built around high quality VCA chips from THAT Corp, as well as low noise opamps. It offers clickless muting and equal loudness panning. The distinct feature is that voltage control is dynamically compressed should it yield clipping when pushed too hard. Also, in both modes the attenuators offer full closing of the corresponding channel, regardless of being controlled by the CV, or not. The VCAs fully open (0dB gain) at CV=8V in Env mode and CV=5V in LFO mode. All the input and output signal levels are Eurorack levels.

Multiple Praga units can be chained thanks to dedicated headers on the back. The mixed stereo sum of each unit in the chain is added to the mixing bus of all units downstream.

A dedicated Hrad expander will offer master volume control, gate inputs for channels muting/unmuting, headphone amplifier, and voltage control over aux sends.

Notes: Part of Xaoc's Leibniz binary system, the Rostock is a digital delay line capable of processing triggers, audio, CV and video signals. Another useful module from the unique Leibniz series.

Supplier's Notes:
Rostock is a component of the Leibniz Binary Subsystem. It is a data pipeline, a FIFO (first in - first out) shift register, or a very short digital delay. The module operates similarly to a BBD delay or an ASR (analogue shift register), except that it is digital. It consists of a chain of memory cells that pass bits from one to another at each clock cycle. The delay length is variable from 1 to 64 stages (with optional looping and scrambling). It works by processing data in the Leibniz bus and must be connected to other Leibniz modules using data ribbon cables at the back. Rostock may process data sequences representing rhythms, control voltages, audio-rate signals, and even video signals because the bits can change at extreme rates (up to 2MHz). In addition, its memory may be digitally looped. Delaying and looping is a fundamental building block for sequence automation, pattern and chaos generation, and various cybernetic modular patches. Thus, Rostock is a multi-purpose open-ended device that invites creative thinking.

Technical details

Eurorack synth compatible
8hp, skiff friendly
Current draw: +70mA/-40mA
Reverse power protection

Notes: Sarajewo is an analog delay module based on old school (but newly manufactured) BBD (Bucket Brigade Delay) chips. It features three delay taps, an external clock input with various tempo sync factors, and a wide range of settings controllable via CV. It is based on high quality components with maximum effort put towards the highest sound quality possible, while still preserving the charm of the BBD technology. The module offers a clean and warm analog sound with tons of character and a comfortable user interface with a tap tempo button, signal level indicators, sync and CV inputs, four signal outputs, and an adjustable feedback filter.

TECHNICAL DETAILS:
Eurorack synth compatible
12hp, skiff friendly
Current draw: +180mA / -120mA
Reverse power protection

Notes: Sewastopol is a multifunction Eurorack module designed for easy interfacing of external gear to your modular environment. It can export line and professional level audio, import audio from instruments and electroacoustic transducers, and analyse the incoming audio to generate voltages and triggers to control your modular system.

This is a second, vastly improved revision to the original 2014 Sewastopol, featuring a completely redesigned preamplifier circuit, better ergonomics and various other improvements.

Notes: Warna is a very useful utility module that helps you to manage control voltages in the system. Crammed in just 6 hp, there are five normalled sections: two buffered mults, two inverters, and a summing mixer. Each multiple routes the input signal to separated outputs without loss in voltage. Warna is designed for unity gain - if you apply a specific voltage to any input, it remains the same on the respective outputs. Inverters are hardwired to mults and invert the polarity of the signal applied to them. Both mults are also normalled to the mixer section via inputs. Patching anything to these inputs breaks the normalization.

The top and the bottom section both are buffered 1-in-4 multiples. The input can be inverted with a switch, i.e. its polarity will be changed by 180 degrees. Four inverted copies are then available at the outputs, meaning you can use these two sections as inverter. Bi-polar LEDs display whether the signal is positive or negative: yellow = negative, red = positive. The centre section is a four-input summing stage with amplification factor 1, a so-called unity-gain mixer. The multiples are normalized to the mixer which can be deactivated by patching.

Notes: Zadar is a powerful, four-channel envelope, modulation, and transient generator, in a compact yet very complete, feature-rich package. It is capable of synthesising a vast palette of envelope shapes starting from hundreds of shapes stored in the memory. These starting shapes are not mere wavetables, but flexible vectors that can be stretched (from a fraction of a millisecond to half an hour), flipped, warped, distorted, delayed, shuffled, repeated, and amplitude modulated in real time. A set of freely assignable CV inputs allows for external control of most parameters. Each channel can work independently or combined with other channels within one of the chaining and looping algorithms.

Operating Zadar is quick and immediate, thanks to its accessible interface and crisp OLED display. The main screen displays all parameters together with the currently selected shape. Entering the simple 3-page menu is needed only for advanced settings.

Notes: A seriously versatile filter here, much more than meets the eye. Stereo, state-variable, multi-mode design gives you huge control over frequency response and stereo image.

Supplier's Notes:
Zagrzeb is a stereo multimode 4-pole (24dB/oct) state variable voltage-controlled filter (SV VCF). It offers five distinct frequency responses, three of which are available simultaneously. Spread control allows for animation of the stereo image by moving the left and right filter cutoff frequencies in opposite directions. Zagrzeb is designed to sound smooth and clean unless it is overdriven with a hot signal- however, it does not lack character! We believe it will be appreciated by fans of old Japanese synthesizers, but bear in mind that Zagrzeb is not a clone of any existing design. The four-pole state variable structure is a new development and offers unique sonic characteristics. While Zagrzeb is designed for filtering stereo signals (e.g. samples or stereo oscillators like Xaoc Devices Odessa), it can easily handle mono signals and is capable of creating a faux stereo pair thanks to a special phase shifting network at the input.

Dimensions:
8 HP

Current Draw:
70 mA +12V
60 mA -12V
0 mA 5V

Notes: Updated expander module for the Moskwa II sequencer. The Ostankino adds additional connectivity to the Moskwa II, allowing CV control of most parameters, plus extra outputs.

Supplier's Notes:
Ostankino II expander adds CV inputs for many Moskwa II functions, as well as a transpose input, clock out and individual gate/bit outputs for each step.

Notes: Diode Chaos is a 3hp analog chaotic low frequency voltage generator Eurorack Module available as Eurorack DIY Kit, PCB and Panel, or Built Module.

It is a unique module because it has never existed as an electronic music instrument until now. The module is based on a circuit from a paper called "A simple chaotic circuit with a light-emitting diode" written by Volos, Wang, Jafari, and Kapitaniak.

Diode Chaos produces 3 phases of interrelated morphing voltages including a chaotic trigger out. The range is 20-30 seconds a cycle up to audio rate, although only the X out and TRIG out go up to audio rate. The frequency is controlled by the RATE knob. Each output exhibits different behavior at different rate settings. X,Y, and Z outs like to stay in the 4vpp range although at different RATE settings the outs can reach 10vpp. The TRIG out chaotically releases 0-10v triggers although sometimes it will spit out smaller voltage peaks.

LED soldermask windows provide constant display of positive and negative voltage crossings.

Differences between chaos and random(some quoted and summarized material from Ian Fritz's site):

Chaos is "highly irregular, but still contained within a finite region (the "strange attractor")"

Chaos occurs in 3 dimensions.

Chaos needs a non-linear element (with Diode Chaos the nonlinear element is a red LED, and the chaos is directly visible and useable at the TRIG out).

Notes: The Dual VCA is a 2hp 2 channel Analog VCA and Mixer Eurorack Module available as a Eurorack DIY Kit, PCB and Panel, or Built Module.

It is a DC coupled OTA(LM13700) Dual Linear VCA based on the same fabled design of the VnIcursal VCA. The 2 VCAs are summed together so it can be used as a voltage controlled mixer at the "SUM OUT" or all 3 outs can be used separately and simultaneously. 5 volts into the CV in will provide unity gain, anything above 5 volts can clip the input.

Notes: The Entropy Expander is a 3hp Analog Random Voltage Generator that expands upon the features of the Entropy Euroack Module. Available as a Eurorack DIY Kit, PCB and Panel, or Built Module.

The Entropy+Expander packs together some of the most random voltage options in 6hp. It provides a controllable "Glide"(slew) out for the S/T\H, a comparator with a controllable rate("Thrsh") of random gates("Rand Gate") out with an input to compare other waveforms(Comp In, inserting a cable into here breaks the white noise normalization), and high pass filtered white noise resulting in approximate "Blue noise" (+3db/octave) and "Violet noise"(+6db/octave) outs.

The unique part of the circuit is a voltage controlled A/B switch thats normalled to the "Rand Gate" out that's switching between the S/T\H out(left Blue led window)and Infra out(right Red led window), the Glide control also effects the S/T\H coming out of the switch so you can get really random results from the "Entropy Out." Inserting a cable into "Switch CV In" breaks the random gate normalization and lets you toggle between A/B(left S/T\H out and right Infra out, indicated by the led windows) with your own gate or trigger.

There is a jumper on the pcb to select if you want glide on the s/t\h at, Entropy out, or un-slewed operation. There is also a trimmer for setting the amplitude of the incoming signal at "Comp In" which sets the frequency range of random gates. This may have to be adjusted depending on your Entropy version.

The random gate range can also be set up more as a noise oscillator by turning the pcb trim(clockwise) up or it can be set so random gates are extremely slow(trim counter clockwise) with minutes between random gates.

Notes: The Foldiplier is a 4hp odd/even harmonics generator with 2 different oscillating feedback paths. The folding core of the design originates from the odd harmonics (middle)section of the Serge Wave Multiplier. But the Foldiplier adds voltage control over the symmetry and offset as well as a switch for feedback, jumper selectable between, a transistor based oscillating fuzz inspired by the Hemmo Bazz Fuss with a lot more low harmonic content and a passive oscillating half wave rectification circuit with more high harmonic content. When these feedback oscillations mix with an incoming waveform some unpredictable and unique nonlinear timbres can be achieved. The module can also be used as a no-input experimental oscillator with the feedback switch engaged. All diodes in the module are silicon.

The Fold knob controls the amount of times the waveform is folded in on its self (indicated by the red led window below the knob). The C.V. knob below is an attenuator for incoming control voltage corresponding to the Fold jack(indicated by the red led window above the jack, it only responds to positive voltage). So, the Fold knob acts like an initial amount of folding depending on its position. For example, with the Fold knob fully clockwise you can get even more folds with a control voltage in at the Fold jack. The Offset knob controls how much positive DC voltage(0 to 5v, clockwise) or negative(0 to -5v counter clockwise) DC voltage(indicated by the led window above the Offset jack, red for positive, yellow for negative) injected into the waveform via the Symmetry knob. With the Offset knob position at noon(0v) there will little effect from the Symmetry knob. The Offset jack is expecting +5v to -5v with knob position at noon to scan through the positive and negative voltage. The Symmetry knob controls the amount of negative or positive offset voltage(dependent on the Offset knob) mixed with the waveform(indicated by the yellow led window above the Symmetry jack). If positive voltage is mixed with incoming waveform more folds will occur on the positive troughs of the waveform, likewise, when negative voltage is introduced more folds happen on the negative troughs. This part of the circuit can also be broken down by thinking of the Offset as a voltage controlled crossfader swinging between positive and negative voltages into a VCA controlled by the Symmetry knob and jack. When a voltage is present at the Symmetry jack the Symmetry knob becomes an attenuator. The Symmetry jack only responds to positive voltage.

Width: 4hp
Panel Material: Double Sided PCB panel with Classic and Soulless
Reverse Power Protected
Current Consumption: +12v: 40mA, -12v: 35mA
Depth: 47mm or 1.75"
All through-hole build
Ships with M3 black nylon screws
Expandable: No

Notes: The SVF is a 4hp 2 pole 12dB State Variable Filter Eurorack Module available as a Eurorack DIY Kit, PCB and Panel, or Built Module.

It provides Low Pass, Band Pass, and High Pass outs inspired by WASP and Thomas Henry filter topologies. The filter has 2 audio inputs, but channel 2 is jumper selectable between standard audio in or Ping-able operation. The 2019 revision also adds improved cutoff and resonance response and attenuversion through the ACV IN using the above pot. CV IN provides another unattenuated voltage input to modulate the frequency.

At the CV in, +10v will open the filter completely if the cutoff pot is CCW(counter clockwise). With the cutoff knob at noon the filter can be opened with +5v or closed with -5v. CV input at the ACV in is dependent on the CV attenuverter knob.

There are also several jumper selectable modes for max resonance, self oscillation or no oscillation based on the setting of the resonance pot. According to the jumper configuration, the filter is capable of clinical and clean, to juicy and drippy, to low pass gate sounding plonks, to screaming chaotic resonance. When set to self oscillation mode, the filter can produce a sine like wave with no input and a trapezoid like wave in the max resonance jumper setting. In max resonance mode, the filter output can exceed 10Vpp. On the newest version, there is a trimmer on the top pcb to set the lowest cutoff frequency.

The new black and white pcb/panel is reversible meaning, one side is classic (first picture) and the other side is soulless (second picture).

Notes: The Triple Cap Chaos(C^3 Chaos) is a 2hp analog, chaos based, noise oscillator, pseudo ring modulator/harmonics generator, and audio mangler Eurorack module available as a DIY Eurorack kit, PCB and Panel, or built.

It is a unique module, like the Diode Chaos, because it has never existed as a musical instrument until now. There is also no other module to my knowledge that can do exactly what the Triple Cap can do. The circuit(with several modifications) is based on the paper "Simple Autonomous Chaotic Circuits" by J.C. Sprott and Jessica R. Piper. As opposed to the Diode Chaos that generates control voltage this module focuses on the audio rate.

The "Emanate" potentiometer controls the coarser overall spectrum of the chaos, from lots of activity counter clock wise up to less chaos and more of a steady oscillation. The "Width, CV ATT" potentiometer can be thought of as more of a fine control for the chaos/oscillator. When something is inserted into the "CV" in the voltage normalization from the width knob is broken and the potentiometer now acts as an attenuator for the incoming cv. The Triple Cap is not a traditional volt per octave exponential VCO, and has a sort of narrow frequency range to exploit the chaotic behavior.

It expects a +5v to -5v max signal in to modulate the chaos. The "IN" jack is an A.C. coupled input for audio in, although cv and audio can work for both the "CV" in jack and "IN." The "IN" will interfere and interact with the onboard chaotic oscillator depending on the frequency of the input, which may take some experimentation. It can create ring mod ish sounds, to added harmonics, to almost bit crushed sounds depending on the "X" or "Y" output. The "X" output is a more windy noisy sinusoidal based output and the "Y" output is more squared off and aggressive, harsher sounding output.

Some quirks about the Triple Cap: The "X" output can offset negatively or positively a little bit depending on the pot settings, but both outputs tend to stay around 10vpp. With the "Emanate" and "Width" pots all the way up the typical frequency will be around 150hz although some will reach 200hz at this setting. With the "Emanate" pot full counter clock wise "Width" pot full clock wise the frequency will be around 250hz. It is possible to send signals into the triple cap that can bring it out of the desired range causing the oscillation to cut out.

The Triple Cap has a double sided panel. meaning one side has the classic graphics and the other is Soulless with less graphics.

Notes: DP-2 Digital Drum Practice Pad

DP-2 is a drum practice pad for solo practice and technique improvement. The pad can be used on a desktop or mounted to a snare drum stand and played with standard drum sticks. A built-in metronome produces audio prompts or spoken word beat counts through the integral speaker or via a headphone output. Each strike on the pad can be detected, which works with the internal modes to provide interactive rhythm training. Time signatures and beat types can be selected as needed within a wide range of tempo settings, all comprehensively displayed on the built-in LCD screen. Powered from its internal battery, the DP-2 can be re-charged via USB (5V 2A) using the supplied lead. An excellent and enjoyable training tool for drummers of all levels.

Comprehensive LCD display
Interactive rhythm trainer
USB type-C charging cable included

Battery: Internal 1300mA Li-ion rechargeable
Power in: USB type-C (for charging)
Speaker output: 0.5W
Recharge time: 2 hours
Tempo range: 40bpm - 208bpm
Time setting: 1, 2, 3, 4, 5, 6, 7, 8, 9
Dimensions: 270 x 240 x 27mm
Weight: 726g

In the box

The box for this item contains:

DP-2 digital drum practice pad
USB A to C lead (charge only)

Notes: Redefine the beat: your control, your performance.

The MPS-10 is a game-changer in drum and percussion technology. Built with both durability and precision in mind, it's designed to meet the evolving needs of today's drummers and percussion performers.

Six versatile pads offer a rich array of sounds, while 4 ground-breaking CC pads give real-time control as never before. Expand the possibilities further with an intuitive sampler and powerful 4-track looper, alongside inputs for external triggers and footswitches.

MPS-10

6 instrument pads
4 CC pads
4-track looper
Intuitive sampler
Huge library of instruments and samples
Powerful effects
Smooth Sound Transition
External triggering capabilities

Take your performance on the road

Created to be an indispensable companion for drummers and percussionists, the MPS-10 is a powerful blend of sonic capability and performance control. It features a deep library of 2,350 assignable instruments and more than 3000 high-quality samples that range from dynamically expressive instrument tones with captivatingly nuanced variations based on your strike's intensity, to the essential electric instrument sounds that drive modern drumming today.

Powerful effects

MPS-10 has an incredible default master reverb and filter, further enhanced with two insert and one master effect slot. Effects can be easily toggled for each pad, making intricate tonal changes a breeze.

Seamless transitions

Experience uninterrupted creativity with the Smooth Sound Transition (SST), ensuring flawless kit transitions after striking a cymbal or repeating a sample. When you need guaranteed silence, a simple press of the "sound off" button has you covered.

Looping unleashed

MPS-10 features an incredibly flexible and powerful 4-track looper. With dedicated looper effects, crafting intricate looping phrases is easy. Synchronized settings ensure flawless playback across tracks, and each track can be exported as an audio file!

The CC pad revolution

At the top of the MPS-10 sits four CC pads. These give you a level of control never before seen on an instrument like this. Able to detect the strike position with incredible precision, these pads give you powerful control over parameters such as filtering, EDM-inspired drum rolls, and real-time tonal transformations through versatile MFX functions.

Unlock your creativity

The sampler function within MPS-10 liberates your creativity, allowing effortless importing of user samples. Seamlessly import sounds from a USB flash drive and assign them to any pad, and even replace portions of preset kits to build your own personal sound set.

See your sound

Take centre stage with confidence thanks to the vivid full-colour display - easy to read even under the brightest lights. Tailor the saturation to your preference, and with three-color LEDs illuminating each pad, MPS-10 ensures seamless performance on even the dimmest stages.

Craft your kit

Crafting your signature kit is a breeze with the MPS-10 Editor, a user-friendly web app. Simply connect the MPS-10 to your computer via USB, and dive into a realm of endless creative possibilities as you shape your own unique kits.

External triggering
Dual trigger-in terminals accommodate up to four triggers and pads via a Y shaped cable, giving a total of 15 sounds within one kit. MPS-10 even features a dedicated bass drum trigger (pad 11).

Built to perform

Developed by the team behind the WaveDrum and Pearl e/MERGE, the MPS-10 provides the ultimate drum pad experience. In pursuit of a combination of durability and performance, a high-quality rubber material was perfected through extensive consultation and trialling with the most demanding professional players. The perfect balance of feel and sensitivity enables drummers and percussionists to express themselves naturally. The pad layout is designed to ensure the ideal striking position when integrated into a drum kit, resulting in comfortable playing and superior strike detection.

Specifications

Kits

200 (including user KITs)
INST 2358
SAMPLE 3000

Effects: 77
Max Polyphony: 48

Audio outputs: Headphones (6.3mm TRS); MAIN OUT L, MAIN OUT R, SUB OUT 1, SUB OUT 2
Audio inputs: LINE IN L/R, MIC IN (6.3 mm TRS phone jacks)

Control inputs
CH A/B, C/D (6.3 mm stereo phone jacks)
Foot pedals: 1, 2 6.3 mm TRS phone jacks)
Expression pedal (6.3 mm TRS phone jack)

MIDI/USB
MIDI Out
USB-A (Type-A) USB standard ver. 2.0, Hi-Speed compliant (480 Mbps)
USB-B (Type-B) USB standard ver. 2.0, Hi-Speed compliant (480 Mbps)

Internal memory: 32gb (inc. preset data)

Audio playback WAV, 44.1 kHz/48 kHz, 16-bit (up to 60 minutes long)
AIFF, 44.1 kHz/48 kHz, 16-bit (up to 60 minutes long)

Display: 320 x 240 backlist colour LCD
Operating temp: 0 to +40oC
Power supply: AC adapter (DC 9V)
Dimensions: 424 x 264 x 75mm
Weight: 2.3kg
Included items: AC adapter

Notes: DP-2000 is a digital percussion pad with 8 touch sensitive zones and a huge library of internal sounds.

A USB-to-PC/Mac interface enables integration with a software recording suite as a trigger controller and sound source. Sounds from the flagship DM-8 kit are stored internally, along with additional world percussion instrument samples and the option to add user samples from a USB flash drive. Sounds are assignable to pads and adjusted using the intuitive user interface and control surface, and each pad has a dynamic indicator which varies in brightness to mirror the playing dynamics. Dedicated MIDI in and out connections mean that the DP-2000 can expand a live playing setup or operate from hardware sequencers and other MIDI controllers. In addition to tuning and dynamics control, dual-engine DSP effects can be applied to each sound and tailored to suit each sound. If performance space is very limited, inputs for a hi-hat pedal, kick pad and an additional trigger can turn the DP-2000 into a fully playable super-compact e-drum kit. Add the possibility of music playback from USB flash drive and comprehensive input and output options, the DP-2000 is as much at home as a standalone instrument or as an expansion to an existing drum or percussion kit.

Add hi-hat & kick triggers for a full e-drum kit
USB-C Bluetooth adaptor
USB interface to PC/Mac
Importable WAV files for custom sounds
Power supply: 9Vdc, 500mA (tip-negative) adaptor supplied
Inputs: Aux input, trigger, hi-hat, kick, MIDI 5-pin DIN, USB-C (U-Disk)
Outputs: Headphones (3.5mm), L+R output (6.3mm), MIDI, USB-B (PC/Mac)
Dimensions: 408 x 314 x 62mm
Weight: 2.8kg

In the box

The box for this item contains:

DP-2000 digital percussion pad
DC power adaptor
USB-C Bluetooth adapter

Notes: T stands for Time.

The T-Resonator transforms timely events into an analog feedbacked filter network. What comes out of this you can hear in the audio samples.

The T-Resonator is something like an M-Resonator + Digital Delay. But you can select 8 different delay algorithms, each with different delays and different feedbacks and modulate them even with an LFO.

Delays reach from less than a millisecond to 1 second, range and structure is depending on the algorithm.

The delay feedback comes across the analog filters, of course.

You can create gaining analog echoes, klingon parties by extremely feedbacked wave guide algorithm and much more.

By the analog feedback everything sounds organic.

The screaming analog feedbacks can delay themselves and thereby form new sound patterns.

The sine LFO gets retriggered by the audio signal and can be shaped with the audio envelope or just run alone. In center position the amount is 0, to the left it's envelope-shaped LFO, to the right it's only LFO.

The filters are made from discreet parts and form a 24 dB pole lowpass filter transistor cascade.

They can, in any thinkable way, be self feedbacked and be coupled or feedbacked with each other, so that extreme sounds and chaotic states create - all what you need today for creative analog sound design.

Incredible bass gains or screaming scratch sounds are no problem. The mix pots are zeroed in center position; any other angle will couple or feedback negatively or positively. FM in both directions is also available.

The input has an adjustable gain and a Hi-Z input to plug in a guitar directly. Any line level signal can be processed, be it either mono or stereo.

NB: Comes with EU plug power supply

www.youtube.com/watch?v=P6FHbqRb9S4

Notes: Compact version of a modern classic, based around a pair of complex analogue filter circuits with amazing sound and huge hands-on tweaking potential. One of our absolute favourites for studio, live use and even DJ setups.

Supplier's notes:
A classic, but smaller - The Sherman Filterbank is a powerful analog filtering and distortion unit with a huge frequency range and a killing overdrive behaviour. It's easy and FUN to use, live and in the studio processing every sound source, effect mixing, expanding modular systems, etc.

- Independent low pass, band pass and high pass filters with resonance, frequency and ADSR (positive - negative) controls
- These are switchable between parallel or serial
- The second filter has a 6 octave switch, and is synchronizable with the first filter
- 1 ADSR generator for these filters with an external output for use with more filterbanks or modular systems, triggered by the incoming signal, by a second sounds source, or by a gate
- 1 FM input for the filters, internal or external audio, LFO or CV
- 1 VCA overdrive with AR generator also

Connectors:

- MIDI In/Out, 3x Thru
- Main out, out1 (Filter1)
- Trigger AR, AM In, ADSR Out and Trigger In, Link In/Out, FM In, Sig. In, Pedal In

Notes: We have to admit being more than a little proud when thinking of the Action Filter's history. Twelve years ago we made the first version of this still popular stereo-filter with no end in sight. It still is built upon the same basic principle: ACTION!

Neither MIDI nor control voltage decide about filter sweeps and cues but you. Action Filter demands and supports your intuition and creativity. Reign over frequencies and rhythm instead of being a victim of technique.

What remains?

Like its predecessors, Action Filter 4 consists of a high-/lowpass filter-combination per stereo channel. Together, these either work as bandpass- or notch-filter with variable bandwidth and individual resonance per filter.

What's new?

Unspectacular but a spectacle nevertheless: Beside the mandatory RCA in- and outputs, Action Filter 4 is equipped with 1/4"-jacks. In addition, the FILTER MODE switch made it to the unit's front, labeled as STYLE.

Who is the Action Filter 4 dedicated to?

... of course for all action heroes! With jack- and RCA-connectors, Action Filter 4 is best suited for the DJ booth as well as for studio applications. You can use it to process full tracks or add that "certain something" to individual audio tracks. Emphasize or kill specific frequency bands and - on top of it - have lots of fun actively playing with frequencies! Simply: ACTION!

Notes: The Vermona Filter Lancet is a compact but versatile stand-alone multimode filter for your desktop. It's the right weapon against static sound and boredom and made for any kind of audio signal. The filter section itself has 3 modes: low-pass, high-pass and band-pass. The last one works with a slope of 12 dB per octave whereas low- and high-pass are 24 dB filters.

You can give the filter some extra punch with the Balls knob, known from Kick Lancet. It pushes low and high frequencies of the signal before being filtered. And of course the resonance is self-oscillating.

Other than the filter section of Mono Lancet, the Filter Lancet is not based on (Moog-) cascade circuitry. It was inspired by the filters of the Vermona M.A.R.S. respectively DAF-1 and Action Filter.

Without modulation the Filter Lanced would still be a good filter but kind of boring. So it is equipped with a LFO, an envelope generator, an envelope follower and a CV/pedal input. The LFO has 2 frequency ranges and goes up to 250Hz - that's fast. At low frequencies the LFO can be re-triggered by gate- or audio signals. It has sample & hold and five waveforms: saw up and saw down, square, sine and triangle.

The envelope generator can be triggered by the input signal or an additional audio signal as well as by a gate voltage. If triggering it via gate it works as an attack-sustain-release envelope. With audio triggers its mode is attack-decay. The envelope follower transforms the contour of the input signal into control voltages that can serve as modulation source.

The LFO modulation intensity can be set separately from modulation intensity of envelope generator and envelope follower on the VCF- as well as on the VCA section.

The Filter Lancet features a drive circuit right in the input section to add subtle shades of overdrive up to solid distortions.

The Filter Lancet is packed with useful features. It's a great and powerful addition to any synthesizer including Mono Lancet with or without Modular Dock. But Filter Lancet also is designed for stringed instruments. It creates standard effects like WahWah and tremolo with ease and even adds a palette of extraordinary sounds to any effect repertoire.

Notes: The CA-50 features high-precision tuning functionality and a slim and compact design. The new CA-50's display is now, even easier to read. Long considered the standard in chromatic tuners, the CA-50 offers simple and intuitive operation and a satisfying tuning experience for every instrumentalist.

The LCD screen of the CA-50 shows a needle-type meter to quickly and accurately show the pitch, and provides a note name indication in the middle of the display. The note name indication is now larger and even easier to read. This ensures simple and smooth operation even for beginners.

The CA-50 features a detection range of A0 (27.50 Hz) to C8 (4186.01 Hz). For wind instruments from piccolo to tuba, or string instruments from violin to contrabass, you can tune band or orchestral instruments of any pitch range. A high-sensitivity mic is built in, allowing the note name to be detected accurately even without a contact mic. By using the separately sold CM-200 contact mic, you can tune with confidence that nearby sounds will not affect the result.

The calibration function supports a variety of concert pitches. It can be adjusted in 1 Hz units in the range 410-480 Hz, allowing flexible tuning that matches the song or key.

The meter scale of the CA-50 provides marks that indicate pure major and minor third intervals. By tuning to these marks you can play beautiful harmonies when you're in an ensemble. This is convenient not only in a brass band or orchestra, but also for vocal or a cappella practice.

The "Sound Out" mode lets you listen to a reference tone emitted by the internal speaker, allowing you to tune by ear. A reference tone in the range of C4 (261.63 Hz) to C5 (523.25 Hz) can be output. You can check the pitch using both eye and ear, allowing you to tune more accurately, and also providing an ideal method of training your sense of pitch.

The CA-50 can be used for approximately 135 hours (when using zinc-carbon batteries). When the remaining battery capacity runs low, the display shows an indicator, letting you know that it's time to replace the batteries.

A new mechanism reduces the possibility that the unit will overturn, making it less likely that the tuner will slide off and fall when placed on a music stand. You'll be able to concentrate on your playing without fearing that the tuner might fall during the performance.

The memory backup function remembers the calibration and sound out mode settings even when the power is turned off. (Settings are initialized when you replace the batteries.) The auto power off function automatically turns off the power when 20 minutes have passed without sound being input.

The folding stand allows the tuner unit to be more stable on its own. The sliding battery cover is designed as a single piece with the unit itself, so there's no worry that the cover might be lost when replacing the batteries.

Notes: Korg's next-generation pedal tuner featuring the powerful new ULTRA BUFFER is even more compact and easy to use.

Featuring the newly-developed ULTRA BUFFER.

The Pitchblack X mini not only features a true bypass for outputting the sound exactly as it was input, but now includes a built-in ULTRA BUFFER.

Why is this important?

The majority of electric guitars use passive pickups with a high impedance output. When you are using a cable there is a loss of tone, usually high frequencies, after about 6 m (around 18 feet) and this problem gets worse the longer your cable. A buffer boosts the signal over long cables to avoid loss of tone, keeping it clean and clear - even when your pedal is off.

The ULTRA BUFFER enhances the sound quality in bypass mode, so that you can still maintain audio quality even when using a long cable to connect to the tuner, or when inserting the tuner into a complex effects board.

On the Pitchblack X mini, you can switch between true bypass and the ULTRA BUFFER, according to your tastes and performance environment.

Compact housing that's packed with powerful functionality

The Pitchblack X mini is the smallest tuner in the Pitchblack X series, and offers stress-free insertion into your gear-packed effects board. Weighing just 124 grams, this tuner features a powdered finish with a strong and durable housing.

Meter LED also offers bright mode settings for high visibility.

Besides the enlarged display, more meter LEDs have been added for superior visibility.

The bright mode (brightness) can be set at one of two levels, so that you can be sure to see the tuner display even better in situations where visibility is difficult, such as brightly lit stages and bright outdoor environments.

Ultra-high tuning accuracy down to +/- 0.1 cents.

The Pitchblack X mini offers highly precise and accurate tuning within a precision of i0.1 cents when in Strobe mode, making it ideal for situations where the tuning must be absolutely right whether performing or recording.

Four meter display modes.

Select from four types of meter display to match your requirements. Aside from the typical "Regular" mode, you can use "Strobe" and "Half Strobe" mode to indicate changes in pitch by the direction and speed that the meter is flowing in to distinguish even the finest differences in pitch; and you can use "Mirror" mode to see two LEDs on the left and right crossing together towards the center as you tune your instrument.

Features a built-in "just-right tuning" display.

The Pitchblack X features a new "just-right tuning" display function, which makes the triangular LEDs on both sides blink when the tuning is correct, helping tuning be a stress-free experience.

Specifications:
Scale: 12 note equal temperament
Detection Range: E0 (20.60Hz)~C8(4,186Hz)
Calibration Range: A4=436?445Hz(1Hz steps)
Detection Accuracy+/- 0.1 cent (display mode: Strobe)
Input Impedance1 M-ohm (tuner on)
Display Modes: Regular, Strobe, Half-strobe, Mirror
Connectors: INPUT (mono 1/4" jack), BYPASS (mono 1/4" jack), DC 9V IN
Power Supply: AC adaptor (9V)
Power Consumption: Maximum 30 mA
Dimensions: (W x D x H)45 x 93 x 43 mm (including protrusions)
Weight: 124 g
Included Items: Notices, Rubber feet
Accessories: AC adaptor (9V)

Notes: A new kind of pedal tuner, featuring an integrated display and footswitch.

Switch between true bypass or the newly-developed ULTRA BUFFER.

The Pitchblack XS not only features a true bypass for outputting the sound exactly as it was input, but now includes a built-in ULTRA BUFFER.

Why is this important?

The majority of electric guitars use passive pickups with a high impedance output. When you are using a cable there is a loss of tone, usually high frequencies, after about 6 m (around 18 feet) and this problem gets worse the longer your cable. A buffer boosts the signal over long cables to avoid loss of tone, keeping it clean and clear - even when your pedal is off.

The ULTRA BUFFER enhances the sound quality in bypass mode, so that you can still maintain audio quality even when using a long cable to connect to the tuner, or when inserting the tuner into a complex effects board.
On the Pitchblack XS, you can switch between true bypass and the ULTRA BUFFER, according to your tastes and environment.

Unique design with a large display in a compact design

With the footswitch integrated into the display, this unique design of the Pitchblack XS tuner offers a compact yet robust form factor with a display that's as large as possible. Featuring a powdered finish on a durable housing, the switch responds wherever you press it, so you don't have to worry about how your foot is placed or what angle the pedal is facing.

Meter LED also offers bright mode settings for high visibility.

Besides the enlarged display, more meter LEDs have been added for superior visibility. The bright mode (brightness) can be set at one of two levels, so that you can be sure to see the tuner display even better in situations where visibility is difficult, such as brightly lit stages and bright outdoor environments.

Ultra-high tuning accuracy down to +/-0.1 cents.

The Pitchblack XS offers highly precise and accurate tuning within a precision of i0.1 cents when in Strobe mode, making it ideal for situations where the tuning must be absolutely right whether performing or recording.

Four meter display modes.

Select from four types of meter display to match your requirements. Aside from the typical "Regular" mode, you can use "Strobe" and "Half Strobe" mode to indicate changes in pitch by the direction and speed that the meter is flowing in to distinguish even the finest differences in pitch; and you can use "Mirror" mode to see two LEDs on the left and right crossing together towards the center as you tune your instrument.

Features a built-in "just-right tuning" display.

The Pitchblack X features a new "just-right tuning" display function, which makes the triangular LEDs on both sides blink when the tuning is correct, helping tuning be a stress-free experience.

Specifications:
Scale: 12 note equal temperament
Detection Range: E0 (20.60Hz)~C8(4,186Hz)
Calibration Range: A4=436-445Hz(1Hz steps)
Detection Accuracy+/- 0.1 cent (display mode: Strobe)
Input Impedance: 1 M-ohm (tuner on)
Display Modes: Regular, Strobe, Half-strobe, Mirror
Connectors: INPUT (mono 1/4" jack), BYPASS (mono 1/4" jack), DC 9V IN
Power Supply: AC adaptor (9V)
Power Consumption: Maximum 40 mA
Dimensions (W x D x H)70 x 80 x 47 mm (including protrusions)
Weight: 198 g
Included Items: Notices, Rubber feet
Accessories: AC adaptor (9V)

Notes: Enjoy private dance lessons anytime - an ultra-miniature music player that you wear in your ear.

SyncDancing is an ultra-miniature music player for ballroom dance practice that you wear in your ear like an earphone. In addition to metronome functionality, it has 20 built-in standard ballroom dance songs, so you can practice at any time while listening your favourite dance songs. This one unit provides everything you need for improving your dancing skills, sharpening your sense of rhythm, and becoming familiar with dance songs. You can practice by yourself, or synchronize the tempo via infrared so that two people can each wear a unit and practice together.

Practice dancing while listening to the rhythm or song directly in your ear:

SyncDancing is a unique style of music player and metronome that you use by wearing it directly in your ear. Since the speaker unit fits directly in your ear, you can practice dancing with the correct rhythm while hearing the music directly in your ear. Because you can concentrate on the sound without being distracted by nearby sounds, this is ideal for personal practice at home as well as for practice in a large dance studio or hall. SyncDancing is extremely small and lightweight, so you can dance without any distraction.

The keys to improving your ballroom dance skills are to acquire steps and technique, nurture your sense of rhythm, and become able to express yourself by dancing to the music. With SyncDancing, you can experience rhythms and music anytime and anywhere for effective practicing.

Twenty standard ballroom dance songs are built-in:

A total of twenty standard songs for ballroom dances such as waltz, tango, rhumba, and cha-cha-cha are built-in, and you can play them back while switching between the metronome and the song (*). Each of the internal songs was created by a professional arranger who actually produces music CDs for ballroom dance. The tone generator section also takes advantage of KORG's many years of experience in developing synthesizer technology, packing a high-quality sound engine into the smallest possible size. Since these songs play back as SMF, you can freely change their tempo. With SyncDancing, you can enjoy serious dance practice with CD-quality songs.

Infrared tempo synchronization, ideal for practicing as a couple:

SyncDancing supports not only individual practice but also practicing dance as a couple. Simply click two SyncDancing units together and press the sync button to synchronize the tempo and timing via infrared (*1). Even while wearing the unit directly in your ear, both partners can practice while hearing exactly the same tempo.

The timing (delay) from the moment of synchronization until playback begins can be set in a range of 0--90 seconds (*2). This gives you flexibility to meet the needs of various situations. For example you can specify a shorter delay if you're synchronizing the units and then immediately starting a lesson, or use a longer delay if you need time to get into your position in a large hall.

Built-in voice count is useful for lessons:

SyncDancing's metronome sound (tone) provides not only the standard "beep beep beep" electronic tone but also a voice count of "one, two, three." You can practice with confidence while hearing the correct count.

A wide variety of beats and rhythms:

The tempo setting range is a generous 30--252 bpm, and you can choose from a variety of beats and rhythms when using the metronome. You can set the beat in the range of 0--9 beats, and choose the rhythm from quarter notes, duplets, triplets, triplets with the inner beat omitted, triplets with the third beat omitted, quadruplets, quadruplets with the middle beats omitted, and quadruplets with the third and fourth beats omitted. This covers your practicing needs for a broad range of songs.

Use the jog switch to set the tempo intuitively:

The SyncDancing features a jog switch on the side of the body, allowing you to easily change the settings without removing the unit from your ear. Using the jog switch you can select not just the tempo setting, but also the song or volume. This provides a compact yet highly intuitive method of operation. The mode select / power button, sync / mute button, and an LCD display that shows the tempo and other information are located on the inside of the body.

Comfortably and securely fits a variety of ear:

The SyncDancing utilizes two distinctive mechanisms to ensure a stable fit in any ear, large or small. The first is an Ear Fitter that extends from below the speaker. Its angle can be finely adjusted by rotating the speaker itself, allowing to fit the various shapes of ear hole. The second is an Ear Clip that opens or closes to fasten on the earlobe. The clip ensures a solid hold that will not be dislodged even by vigorous dancing when in use.

Ear pad and carrying case included.

Notes: Enjoy private dance lessons anytime - an ultra-miniature music player that you wear in your ear.

SyncDancing is an ultra-miniature music player for ballroom dance practice that you wear in your ear like an earphone. In addition to metronome functionality, it has 20 built-in standard ballroom dance songs, so you can practice at any time while listening your favourite dance songs. This one unit provides everything you need for improving your dancing skills, sharpening your sense of rhythm, and becoming familiar with dance songs. You can practice by yourself, or synchronize the tempo via infrared so that two people can each wear a unit and practice together.

Practice dancing while listening to the rhythm or song directly in your ear:

SyncDancing is a unique style of music player and metronome that you use by wearing it directly in your ear. Since the speaker unit fits directly in your ear, you can practice dancing with the correct rhythm while hearing the music directly in your ear. Because you can concentrate on the sound without being distracted by nearby sounds, this is ideal for personal practice at home as well as for practice in a large dance studio or hall. SyncDancing is extremely small and lightweight, so you can dance without any distraction.

The keys to improving your ballroom dance skills are to acquire steps and technique, nurture your sense of rhythm, and become able to express yourself by dancing to the music. With SyncDancing, you can experience rhythms and music anytime and anywhere for effective practicing.

Twenty standard ballroom dance songs are built-in:

A total of twenty standard songs for ballroom dances such as waltz, tango, rhumba, and cha-cha-cha are built-in, and you can play them back while switching between the metronome and the song (*). Each of the internal songs was created by a professional arranger who actually produces music CDs for ballroom dance. The tone generator section also takes advantage of KORG's many years of experience in developing synthesizer technology, packing a high-quality sound engine into the smallest possible size. Since these songs play back as SMF, you can freely change their tempo. With SyncDancing, you can enjoy serious dance practice with CD-quality songs.

Infrared tempo synchronization, ideal for practicing as a couple:

SyncDancing supports not only individual practice but also practicing dance as a couple. Simply click two SyncDancing units together and press the sync button to synchronize the tempo and timing via infrared (*1). Even while wearing the unit directly in your ear, both partners can practice while hearing exactly the same tempo.

The timing (delay) from the moment of synchronization until playback begins can be set in a range of 0--90 seconds (*2). This gives you flexibility to meet the needs of various situations. For example you can specify a shorter delay if you're synchronizing the units and then immediately starting a lesson, or use a longer delay if you need time to get into your position in a large hall.

Built-in voice count is useful for lessons:

SyncDancing's metronome sound (tone) provides not only the standard "beep beep beep" electronic tone but also a voice count of "one, two, three." You can practice with confidence while hearing the correct count.

A wide variety of beats and rhythms:

The tempo setting range is a generous 30--252 bpm, and you can choose from a variety of beats and rhythms when using the metronome. You can set the beat in the range of 0--9 beats, and choose the rhythm from quarter notes, duplets, triplets, triplets with the inner beat omitted, triplets with the third beat omitted, quadruplets, quadruplets with the middle beats omitted, and quadruplets with the third and fourth beats omitted. This covers your practicing needs for a broad range of songs.

Use the jog switch to set the tempo intuitively:

The SyncDancing features a jog switch on the side of the body, allowing you to easily change the settings without removing the unit from your ear. Using the jog switch you can select not just the tempo setting, but also the song or volume. This provides a compact yet highly intuitive method of operation. The mode select / power button, sync / mute button, and an LCD display that shows the tempo and other information are located on the inside of the body.

Comfortably and securely fits a variety of ear:

The SyncDancing utilizes two distinctive mechanisms to ensure a stable fit in any ear, large or small. The first is an Ear Fitter that extends from below the speaker. Its angle can be finely adjusted by rotating the speaker itself, allowing to fit the various shapes of ear hole. The second is an Ear Clip that opens or closes to fasten on the earlobe. The clip ensures a solid hold that will not be dislodged even by vigorous dancing when in use.

Ear pad and carrying case included.

Notes: Compact Tuner-metronome combo

The Korg TM-70T is a compact tuner-metronome combo. Offers precise tuning, clear metronome sound, and a user-friendly display. Features a transpose function, long battery life, and is ideal for a range of instruments. Made in Japan for quality assurance.

The TM-70T combo metronome and tuner is the latest evolution in our TM series, expertly blending a tuner and metronome in one practical unit. Designed for the modern musician, it delivers a suite of features in a surprisingly compact design, ensuring you stay in tune and on beat, whatever your instrument.

The TM-70T is designed to be portable and user-friendly. It's small enough to fit in your pocket, yet features an improved display for easy visibility, making it an ideal companion for musicians of all levels.

Korg have fine-tuned the TM-70T for precision and clarity. The tuning is quicker and more accurate, essential for every performance, and the metronome sound is loud and clear, cutting through even in noisy environments.

Notes: Compact Tuner-metronome combo

The Korg TM-70T is a compact tuner-metronome combo. Offers precise tuning, clear metronome sound, and a user-friendly display. Features a transpose function, long battery life, and is ideal for a range of instruments. Made in Japan for quality assurance.

The TM-70T combo metronome and tuner is the latest evolution in our TM series, expertly blending a tuner and metronome in one practical unit. Designed for the modern musician, it delivers a suite of features in a surprisingly compact design, ensuring you stay in tune and on beat, whatever your instrument.

The TM-70T is designed to be portable and user-friendly. It's small enough to fit in your pocket, yet features an improved display for easy visibility, making it an ideal companion for musicians of all levels.

Korg have fine-tuned the TM-70T for precision and clarity. The tuning is quicker and more accurate, essential for every performance, and the metronome sound is loud and clear, cutting through even in noisy environments.

Notes: Clever little valve-based headphone amp from Korg's NuTekt DIY range. Some basic assembly required but no soldering. Fully customisable for advanced users.

Supplier's notes:
The HA-S is a Nutube-equipped DIY Headphone amp kit that will let you enjoy the highest quality audio anywhere. No soldering is required, so even if you are new to the world of DIY, you will be able to assemble the HA-S to add a warm, analog tube-driven signal boost to any sound source in no time! Build your own Headphone amplifier This DIY HA-S kit allows you to build your very own Headphone amplifier in an easy and fun way, without any soldering needed. Not only that, it provides the authentic vacuum tube sound that audiophiles know and love. Built-in Nutube Nutube is a new and revolutionary fully analog vacuum tube developed by KORG INC. and Noritake Itron Corporation. The same as a conventional vacuum tube, Nutube is constructed with an anode, grid and filament, and operates as a complete triode tube, effectively generating the response and same rich harmonic characteristics of conventional vacuum tubes in a more compact, stable and energy-efficient way. The transparent case of the HA-S delivers a glimpse into this technology; allowing the glow of the tube to be visible at all times. Energy efficiency The filament of the Nutube is powered by a DC to DC converter, which consumes less electric current and thus allows for a longer battery life than other vacuum tube equipped amplifiers. The design is so efficient that the HA-S can drive the Nutube with a line voltage of 26 V using only two A4 batteries., for a rich and authentic vacuum tube sound. Sound possibilities The HA-S has a special NFB (Negative Feedback) switch, that allows you to choose from a high fidelity clean and pristine sound, or a warmer, more harmonically rich sound as expected from a vacuum tube. When the NFB switch is OFF, the harmonics present in the Nutube (triode tube) will be amplified to create a sound rich in harmonics, warmth and textures. When the NFB switch is ON, the distortion ratio and frequency characteristics will be modified, creating a really detailed and clean sound. For further sound modification, we have included two OP amp options for the output: the premium audio oriented "MUSES01" and the industry standard NJM4580, both from JRC. These can be easily replaced so even the most purist audiophiles will be able to customize and adapt the sound of their HA-S to heir heart's content. For advanced users who want to customize their amplifier even more, the circuit diagrams are readily available, making it really easy to change discrete components and make your own and unique headphone amp matching your desired tone and performance -, the possibilities are endless!

Notes: The new Headphone-Case II can hold any common foldable and non-foldable DJ or studio headphones and now features a mesh pocket for USB flash drives.

Fits:

Sennheiser HD-25, Sennheiser HD-8, Sennheiser HD-7, V-Moda Crossfade, Pioneer HDJ-700R, Pioneer HDJ-1500K, Pioneer HD-2000, Ortofon O2, AIAIAI TMA-2, AIAIAI Studio, Technics HP-1200 /1210, Technics RP DH 1200, Shure SRH 40 /20, Beats by Dr. Dre Mixr, Beats by Dr. Dre Studio, Nocs NS900, Reloop RHP 30, Reloop RHP 20, Reloop RP-15, Ultrasone DJ-1 Pro, etc.

Basics:

Lightweight Durashock molded EVA foam and polyester exterior shell
Zip-compartment for USB flash drives
Including carrying handle and adjustable + detachable shoulder strap

Specifications:

Outer dimensions: 18 x 20 x 9 cm
Inner dimensions: 17 x 19 x 8 cm
Weight: 0,3 kg
Colour: black/black

Notes: Ear-Pleasing sound:
Designed for musicians and performers who demand mobility without compromising audio quality, the HP2 personal headphone amplifier is a great choice for driving wired in-ear monitors (IEMs), as well as headphones. PreSonus HP-series headphone amplifiers have long been popular for their loud, clean, clear sound and roadworthy built quality. The new HP2 delivers these qualities in an easily affordable, stereo device so you'll hear every note and beat clearly wherever your music takes you.

One for the road:
Portable and compact, the HP2 gives you all you need to drive your headphones or in-ears without complicating your setup. It sports two XLR line-level inputs and one stereo 1/8-inch headphone output with volume control. Operation can be switched between stereo and mono, and a Pan knob is provided. Like all PreSonus gear, it's built to take the rigors of life on the road. And it mounts on a microphone stand or clips to your belt. Simple, easy to use, built to travel, has the right features, sounds great. That's how we roll at PreSonus.

Power all night long:
When you're playing an extra long show or two shows back-to-back, having to stop and change batteries on your headphone amp is a hassle you don't need. No worries! HP2 stands for "Has Power 2 Spare." The HP2 can be powered with an external DC power supply or a nine-volt battery that lasts more than seven hours and includes an LED battery indicator. So you can play those extra-long gigs and hear your monitor mix perfectly - all night long.

Notes: Are you and your session players and bandmates tired of straining to hear underpowered headphones? That's why Jim Odom and his jambalaya-fueled team of engineers designed 150 mW headphone amps for the HP4 headphone-distribution system.

These headphone amps are not just loud enough for session and stage use, they're loud enough to explode the oysters in a Po' Boy sandwich. Yet the sound is clear and clean, with a wide dynamic range. At last, everybody will be able to heariassuming they are capable of hearing. Be careful with that level control.

Simplicity is the HP4's hallmark. You get left and right line inputs, left and right line outputs with level control, and the 4 x headphone outs. You can globally mute the headphone outs, adjust the overall headphone level, sum the stereo signals to mono, and mute the rear-panel Monitor outputs.

The HP4 can sit on a tabletop or can be screw-mounted to a standard rack tray (not included), where it requires just 1/3 rackspace. And if your needs grow, you can use the line outputs to feed the inputs of a second HP4 or an HP60. Chain as many headphone systems as you need.

So listen up. Quit struggling with mediocre headphone amps. Get the HP4 and hear everything loud and clear. You owe it to your music.

www.youtube.com/watch?v=GOt3LDMtsFM

Notes: On-ear memory foam cushions covered with REPREVE®, a soft, lightweight and comfortable performance material with low isolation. Made from high quality fibers from recycled materials including plastic bottles. Emphasises midrange detail for a well balanced sound profile.

Notes: Headband with three connection modes: W+ Link for wireless ultra-low latency and lossless audio, Bluetoothr 5.0, and cabled. Built-in microphone, includes USB-C charging cable.

Notes: W+ Link transmitter for wireless ultra-low latency connection. Connect the 3.5mm jack to any analog output to transmit wireless audio.

Notes: Neon straight 1.2m thermo plastic cable with a one button remote and inline microphone. Compatible with most smartphones.

Notes: Coiled neon yellow 1.5m thermo plastic cable with soft touch surface. Extends up to 3.2m. Perfect for DJing or small studio use. Comes with 1/4 to 1/8 screw-on adapter.

Notes: Wireless music creation with ultra-low latency and uncompressed audio with W+ Link technology.

Uncompressed and robust 16ms latency connection for high quality wireless audio designed for enhanced freedom and creativity.

Signature AIAIAI bio-diaphragm speaker tuned for clarity and detail.

Critically acclaimed sound stage specifically designed for music creation with a clear and highly detailed sound representation.

Enhanced comfort with Alcantarar over-ear memory foam cushions.

Soft over-ear memory foam cushions covered with resilient, CO2 neutral, and highly comfortable Alcantarar, ideal for longer sessions.

Modular product design.

This TMA-2 modular headphone system offers a customizable solution that adapts to your creative process. With interchangeable components such as earpads, cables, and drivers, you can upgrade or change parts of your headphones to improve sound quality, comfort, or style.

Extended versatility with added Bluetooth for +80h playback and hi-fi coiled cable.

Seamlessly switch to Bluetooth 5.0 with +80h playback for everyday listening and inspiration, and a coiled hi-fi cable included for a traditional connection.

Headphones for life.

AIAIAI offer lifetime trade-in for your headphones or modular parts. With this program, users can leverage the modular product design to get maximum value from their purchase by swapping out used or non-functional headphones or parts for future credit. This means only investing in one pair of headphones, for life.

Wireless music creation with ultra-low latency and uncompressed audio with W+ Link technology.
Signature AIAIAI bio-diaphragm speaker tuned for clarity and detail.
Enhanced comfort with Alcantarar over-ear memory foam cushions.
Modular product design - Headphones for life.
Extended versatility with added Bluetooth for +80h playback and hi-fi coiled cable.

Technical specifications

W+ Link Headband

Audio quality: Lossless
Latency: 16 ms
Operating range: 12 m
Playback time: 16 hrs
Bluetooth version: 5.0
Bluetooth range: 10 m
Charging time: 2 hrs
Battery: 970 mAh
Omnidirectional mic: 100 Hz - 10 kHz
Bluetooth codecs: AAC, SBC

W+ Link Transmitter

Audio quality: Lossless
Latency: 16 ms
Operating range: 12 m
Playback time: 30 hrs
Charging time: 3 hrs
Battery 2700 mAh

Notes: Replacement coiled cable with gold-plated 3.5mm mini plug and 6.35mm adapter, for DT 250-series headphones.

Notes: The NTH-Mic is a high-quality detachable headset microphone for the RODE NTH-100 headphones. It delivers broadcast-grade audio and is optimised for superior plosive rejection, ensuring crystal-clear communication in any environment.

High-quality headset microphone for NTH-100 headphones
Optimised for plosive rejection
Ideal for media, broadcast, content creation, streaming and gaming
Includes 2.4m (8') TRRS cable
Acoustic & electrical specifications

Mechanical specifications:

Weight (grams): 5

Dimensions (millimetres):
Length: 123
Height: 40
Depth: 17

Compatible RODE product:
NTH-100 In the Box:
1 x NTH-Mic
1 x 2.4m TRRS cable
1 x Y-cable splitter

Notes: The UDG Ultimate Headphone Jack Adapter Screw 3.5mm (1/8") to 6.35mm (1/4") connects your headphone's mini-jack plug to a larger stereo jack output. It has a grippy surface to help you grab hold of it. The gold-plated adapter provides a solid connection without compromising sound quality.

Specifications

Colour: Gold
Weight: 0,01 kg
Outer Dimensions (W x H x D): 4.5 x 1.0 x 1.0 cm | 1.77 x 0.39 x 0.39 inch
Inner Dimensions (W x H x D): Not Applicable
Material: Metal
Protection: Gold-plated contacts
Adapter Stereo Mini Jack F / Stereo Jack M (Screw-in)
Nice grippy surface to help you grab hold of it

Extras

High-end realisation
Stereo jack adapter - 3.5mm (1/8 inch) mini jack socket stereo - 6.35mm (1/4 inch) jack plug stereo

Fits: Fits correctly on most headphones - Just screw and play
Please note that this 3.5mm female ports only compatible the 3.5mm male cable with screw threaded

Notes: Finally it's here! The new cable for the Sennheiser HD-25 headphones. This spiral cable in different colours is an absolute eye-catcher and enhances your HD-25 visually. It's not standard, but it makes your headphones special.

This will make your Sennheiser HD-25 unique and stand out from the crowd!

The cross-section of the spiral cable is also thicker than conventional cables, which brings technical and optical advantages.

Fits the following Sennheiser headphones
Sennheiser Sennheiser HD25
Sennheiser HD25-13
Sennheiser HD25 II
Sennheiser HD-25-13 II
Sennheiser HD25 C II
Sennheiser HD25-1 II

Details

Length: 3,5m
3,5 mm stereo jack plug incl. 6,3mm adapter

Gold-plated connections

Connection of cable 1: 1x 3.5mm Jack
Connection of cable 2: special (Sennheiser HD 25)
Cable length: 3.5 m