Back catalogue: Studio Equipment

Notes: Already modern classics, the M50xs get a stylish makeover with this black and blue 'deep sea' edition. Same clear, punchy sound, comfortable design and solid build quality.

Supplier's Notes:
Pure. Professional. Performance.

As the most critically acclaimed model in the M-Series line, the Audio-Technica ATH-M50x Professional Studio Monitor Headphones feature 45 mm large-aperture drivers with copper-clad aluminum wire voice coils, plush sound isolation pads, and an over-ear design. The ATH-M50x provides an unmatched experience for those looking for studio quality headphones at an affordable price. The ATH-M50x delivers accurate audio and deep bass response, making the portable closed-back headphones perfect for long sessions in the recording studio and on the go.

The Choice of Top Engineers and Audio Pros

Engineers and pro audio reviewers agree: the M50x is the choice for pure professional performance.

Coveted Sonic Signature

The way to listen - in the studio or at home. The M50x delivers exceptional clarity throughout an extended frequency range, with deep, accurate bass response.

Engaged Listening

In the studio or onstage, at home or out and about, the closed-back, over-ear design of the M50x gives you excellent passive isolation to keep out exterior noise.

Specifications

Type: Closed-back dynamic
Driver Diameter: 45mm
Frequency Response: 15 - 28,000 Hz
Maximum Input Power: 1,600 mW @ 1KHz
Sensitivity: 99 dB
Impedance: 38 ohms
Weight: 285 g (10 oz), without cable and connector
Cable Interchangeable cables: detachable 1.2 m - 3.0 m (3.9' - 9.8') coiled cable, detachable 3.0 m (9.8') straight cable and detachable 1.2 m (3.9') straight cable
Cable - Detachable Yes
Connector: Gold-plated stereo 1/8" (3.5 mm) connector with strain relief
Magnet: Neodymium
Voice Coil: CCAW (Copper-clad aluminum wire)
Folding/collapsible: Yes
Accessories Included: Protective carrying pouch, 6.3 mm (1/4") screw-on adapter

Notes: The ATH-M50xBT2 is the second generation of Audio Technica's critically acclaimed M-Series wireless over-ear headphones. These headphones feature 45 mm large aperture drivers in a wireless design, so listeners will enjoy the same sonic signature of the legendary ATH-M50x studio headphones. With this update, Audio Technica have also introduced several noticeable enhancements, such as improved vocal pickup for better call quality, an updated USB-C connection, and multipoint pairing mode.

So, whether you're looking for high-fidelity audio for your commute to work, conference call setup, or just relaxing and enjoying the music, the ATH-M50xBT2 lets you go wireless whenever you need it.

Building on the acclaimed sonic signature of the ATH-M50x headphones, the ATH-M50xBT2 headphones utilise Bluetooth wireless technology and offer the same studio-quality sound in a wireless package. The large-aperture drivers deliver deep and accurate bass response for an immersive listening experience, while the AK4331 advanced audio DAC and dedicated internal headphone amp provide superior clear, high-fidelity sound.

The ATH-M50xBT2 features dual microphones and beamforming technology, which provide improved vocal pickup ensuring crystal-clear audio call quality. Additionally, users can conveniently mute with the press of a button or access the built-in Amazon Alexa voice assistant, as well as Google Assistant and Siri.

These headphones have a battery life of up to 50 hours on a continuous full charge, with up to 3 hours of use on a 10-minute rapid charge via the USB-C connection, making them some of the longest-lasting wireless headphones available.

The multipoint pairing function allows users to stay connected to two Bluetooth devices at once, making it easier than ever to switch between tasks. You can also personalise and adjust the ATH-M50xBT2 to your preferences with the A-T Connect app. Adjust additional controls like activating low latency mode, adjust and save EQ to your headphones, change the L/R volume balance, select desired voice assistant, and more.

Included Accessories: The ATH-M50xBT2 comes with a 1.2 m (3.9") cable for an optional wired connection.

Expect more from your wireless - the ATH-M50xBT2 headphones deliver the legendary M50x studio sound - with exceptional clarity and deep, accurate bass response - for an exhilarating wireless listening experience.

Enhanced call quality - Dual mics and beamforming technology provide exceptional vocal pickup, resulting in crystal-clear phone calls and reliable communication with the built-in Amazon Alexa voice assistant.

50 hr Battery Life - with the ATH-M50xBT2 there's nothing to hold you back. You get up to 50 hours of continuous use on a full charge.

Personalised Listening Experience - download the A-T Connect app to gain greater control of your headphones. Easily activate low latency mode, adjust EQ, change L/R volume balance, select desired voice assistant, locate misplaced headphones, change codecs, and more.

A permanent quest for quality

How do Audio Technica improve on the original ATH-M50xBT and the same critically acclaimed sonic performance as the original ATH-M50x professional studio headphones? By expanding the limits of audio technology, pursuing an ever-changing purity of sound.

Specifications

Headphones

Type: Closed-back dynamic
Driver Diameter: 45 mm
Frequency Response: 15 - 28,000 Hz
Sensitivity: 99 dB/mW
Impedance: 38 ohms
Battery: DC 3.7V lithium polymer battery
Battery Life: Approx. 50 hours continuous use
Weight: Approx. 307g
Charging Time: Approx. 3.5 hours
Microphone Type: MEMS type
Microphone Sensitivity: -38 dB (1V/Pa at 1 kHz)
Microphone Frequency Response: 85 -15,000 Hz
Microphone Polar Pattern: Omnidirectional

Accessories Included: USB charging cable, (30cm USB Type-A / USB Type-C), Audio cable (1.2m/ 3.5mm stereo mini-plug), Pouch

Bluetooth

Bluetootr Version: Bluetooth Ver.5.0
Operating Range: Line of sight - approx. 10 m (33?)
Compatible Bluetooth Profiles: A2DP, AVRCP, HFP, HSP
Support Codec: LDAC / AAC, SBC

Notes: You push the button and the audiowerkstatt din-restarter starts or stops the following sequencer at the beginning of the next bar (4/4-stroke only) in perfect timing.

If the sequencer is running, it will be stopped at the next bar and if the sequencer is standing, it is started at the next bar.

The device operates as a standard in "Sync24"-mode (24 clock pulses per quarter note). By holding the button when switching on, the device is started in "Sync48"-mode (48 clock pulses per quarter note).

Notes: Unleash your creativity

Designed for seamless pairing with MiCreator Studio, the Satellite microphone unlocks powerful creative flexibility. Link Satellite and MiCreator Studio via the in/out ports to track an additional sound source or even achieve true stereo recordings and capture the energy of the moment. Satellite even works as a standalone mic and offers a headphone jack. Start recording how you want, when you want with Satellite.

Custom Condenser Capsule - Record in top notch audio quality
Max SPL: 130 dB SPL - Record even very loud sources
FlexTilt mechanic - Easily position the mic head for optimal recording
Full metal housing - Longlasting and durable
Headphone jack
Exchangeable & customizable face plates for an individual and personalized look

Technical Specifications

Directional characteristic: Cardioid
Frequency range: 20 Hz - 20 kHz
Max. SPL: 130 dB SPL
Weight: 220g
Dimensions: 100 x 60 x 28 mm

Notes: The Austrian Audio MiCreator is a new type of creative tool. Equal parts high-quality condenser microphone and simple audio interface with USB-C r connectivity, MiCreator gives you the flexibility to create what you want-how you want. Just plug in and start recording in top-notch audio quality instantly. Or expand your setup using MiCreator's additional input to achieve stereo recordings, record an additional sound source, and more. And whether you're recording at home or on the go, you can create with confidence thanks to MiCreator's ultra-durable metal housing. So, whether you're looking for a capable plug-and-play microphone or a multifaceted production tool, MiCreator simplifies your creative process and delivers no-compromise results.

MiCreator System

Unleash your creativity

MiCreator Satellite

TRRS microphone with headphone jack
Custom Condenser Capsule - Record in top notch audio quality
Max SPL: 130 dB SPL - Record even very loud sources
FlexTilt mechanic - Easily position the mic head for optimal recording
Full metal housing - Longlasting and durable
Headphone jack
Exchangeable & customizable face plates for an individual and personalized look


MiCreator Y-Lav
Lavalier microphone with headphone jack
Pairs seamlessly with MiCreator Studio to unlock powerful creative flexibility
Connected via the Link Connection (In/Out jack on the MiCreator Studio)
Record high-quality audio for video projects and more
Connect a second pair of headphones via the built-in headphone jack

Cubase LE

free Steinberg software included

Cubase LE is the perfect introduction for aspiring music producers and composers. It's a powerful yet easy-to-use DAW that gives you everything you need to create professional music. With its intuitive interface and comprehensive features, Cubase LE is the perfect way to learn the basics of music production. Cubasis LE for iOS devices is unlocked when MiCreator Studio is connected to an iOS device.

WaveLab Cast

free Steinberg software included

WaveLab Cast is the ultimate audio production and podcast software for Mac and Windows. With its powerful features and intuitive user interface, WaveLab Cast makes it easy to create professional audio content. Whether you are an experienced podcaster or just starting out, WaveLab Cast has everything you need to create great sounding podcasts.

Technical Specifications
Digital Resolution: max 48kHz/24-Bit
Digital Connector: USB-C - USB Audio Class 1.0/2.0 compliant
Directional characteristic: Cardioid
Frequency range: 20 Hz - 20 kHz
Sensitivity:- 35dBFS/Pa (low gain)/-15dBFS(high gain)
Hardware Gain Switch: 0dB (low)/20dB (high)
Equivalent noise level: 22 dB SPL (A) (high gain)
Max SPL: 130 dB SPL (low gain)
Output Power: 45mW (32Ohm Load)
Dynamic Range: 89 dB(A)
In/Output TRRS: for instrument cable, 2nd headphone or MiCreator Satellite or Y-Lav
Dimensions: 155 x 60 x 37 mm
Weight: 370g

Notes: Turn your MiCreator Studio into a mobile content creation powerhouse with Y-Lav. Record multiple speakers simultaneously by tethering Y-Lav to your MiCreator Studio. And hear your audio in real time with onboard direct monitoring output. No matter what you create, make sure it sounds as good as it looks with Y-Lav.

Pairs seamlessly with MiCreator Studio to unlock powerful creative flexibility
Connected via the Link Connection (In/Out jack on the MiCreator Studio)
Record high-quality audio for video projects and more
Connect a second pair of headphones via the built-in headphone jack

Technical Specifications

Polar pattern: Omni
Connections: 3.5 mm / 1/8" TRRS, 3.5 mm 1/8" TRS Klinke
Weight: 30 g
Dimensions: 35 x 17 x 17 mm

Notes: Standard USB DATA/charge lead plug A to Micro B 5pin lead. Compatible with most Android and Windows smart phones.

Notes: Standard USB 2.0 type A plug to type A plug lead, suitable for connection of printer, hub, audio devices etc, to PC.

Notes: USB 3.0 type-A plug to type-A socket extension lead. Ideal for extending existing connections used for syncing and charging superspeed USB 3.0 devices.

Simple extension lead for the latest super speed USB 3.0 devices
Backwards compatible for all previous USB versions
Supports data transfer speeds up to 5Gbps and charging at a reduced rate

Cable : diameter 4.5mm

Notes: USB 3.0 type-A plug to type-A socket extension lead. Ideal for extending existing connections used for syncing and charging superspeed USB 3.0 devices.

Simple extension lead for the latest super speed USB 3.0 devices
Backwards compatible for all previous USB versions
Supports data transfer speeds up to 5Gbps and charging at a reduced rate

Cable : diameter 4.5mm

Notes: USB 3.0 type-C plug to type-C socket extension lead. Ideal for extending existing connections used for syncing and charging USB Type-C compatible devices.

Simple extension lead for the latest super speed USB 3.0 type-C devices
User-friendly reversible connector helps you insert the connector the right way, every time
Supports data transfer speeds up to 5Gbps and charging at a reduced rate

Cable diameter: 4.5mm
Cable length: 1.5m
Weight: 46g

Notes: A super speed digital adaptor for converting a USB3.0 Type-A plug to USB Type-C. Simple plug and play operation this tiny unit is ideal for sync and charge applications on the latest smartphones and tablets.

Easily converts a USB3.0 Type-A plug into Type-C for "On The Go" sync and charge applications
Super speed data transfer up to 5Gbps
Simple plug and play operation

Data transfer rate: Up to 5Gbps
Dimensions: 31 x 15 x 7mm
Weight: 4g

Notes: A super speed digital adaptor for converting a USB3.0 Type-C plug to USB Type-A. Simple plug and play operation this tiny unit is ideal for sync and charge applications on the latest smartphones and tablets.

Easily converts a USB3.0 Type-C plug into Type-A for "On The Go" sync and charge applications
Super speed data transfer up to 5Gbps
Simple plug and play installation

Data transfer rate: Up to 5Gbps
Dimensions: 32 x 14 x 6mm
Weight: 4g

Notes: Pack of three, six-way, Befaco-branded multiples with six 3.5mm inputs.

Notes: Two units of the 6-way Squid multiplier cable.

Notes: The ultimate Eurorack case.

At home, stage or into the studio, the Befaco 7U Case brings your system to the next level.

Power to the people

Equipped with Befaco's latest and most sophisticated power supply (Trolley Bus), the Befaco 7U Case supplies up to 5000mA of power. Ready to feed the most modern and power-hungry modules.

Connected to the world

The Befaco 7U Case rear panel count with a vast array of connections to pair your system with external devices. Each connector follows the Intellijel format, making them fully compatible with Intellijel's 1U modules.

Build to last

Designed with a high-quality Unibody Black Anodised Aluminum frame, the Befaco 7U Case is a slim and sturdy solution to travel with. The included PET-G clear cover keeps your modules safe even patched.

Designed to fit any situation, the Befaco 7U Case metal frame is a lightweight and strong device by itself. With a maximum depth of 53mm (power supply side) and 70mm (rest of the case), it can house the vast majority of modules out there. Equipped with a high-quality anti-vandalic power button and a Kensington lock connector, the Befaco 7U Case is also a safe device to travel with.

Because power is important for us, this new Trolley Bus systems drop up to 5000mA on the +12V rail, 2500mA on -12V, and 4000mA on +5V with high voltage stability under load and low noise. The case drives up to 36 modules over its 208HP (3U) and 104HP (1U) rows (Intellijel format).

6x 6,3" Jacks I/Os with Balanced and Unbalanced configuration, MIDI In/Out/Thru ports, USB Device Type B, and Apple compatible USB-A charging ports. The Befaco 7U Case offers a huge amount of connections fully accessible from its internal I/O Board.

Created with compatibility in mind, the rear panel ports are fully compatible with Intellijel 1U modules. The 1U row can be easily customized to be at the centre of the case with just two screws.

To keep your modules safe and dust free, a custom PET-G clear cover is included with the case. The cover has been designed to close patched, and a custom velcro belt is included to keep it safely closed.

To save space in your studio desk, the Befaco 7U Case is also Vesa mount fully compatible. It counts with Vesa threads at the bottom to easily attach it to desktop or wall Vesa stands.

Technical Specifications

External Dimensions (without cover): 53.5cms x 31cms x 8cms
External Dimensions (with cover): 53.5cms x 31cms x 14cms
Internal Row Dimensions: 2x 3U 104HP and 1x 1U 104HP (Intellijel format)
Power supply Specifications: +12V: 5000mA, -12V: 2500mA, 5V: 4000mA
Module Depth: 53mm (power supply side), 70mm (rest of the case)
Module Slots: 36
Weight (without cover): 2.6kg
Weight (with cover): 3.4kg
Rear connectors: 6x 6'3" Jack I/O (Balanced or Unbalanced), MIDI DIN In/Out/Thru, USB Device Type B, Apple compatible USB-A charging ports.
Power brick: 120W 2.5mm Barrel connector centre positive (included)
Cover: PET-G Clear cover (included)
Finish: Black Anodised Aluminum
Vesa 100 format threads. Recommended Vesa stand: >12kg
Kensington Lock

Notes: Bananuts are anodized aluminium custom minijack nuts, following Buchla/Serge colouring code: Blue, purple, red, orange, yellow, white, green and black. Perfect lovely thingies to pimp your modular, code your inputs and outputs with colours or just give a touch of beauty to your favourite gear!

Notes: Bananuts are anodized aluminium custom minijack nuts, following Buchla/Serge colouring code: Blue, purple, red, orange, yellow, white, green and black. Perfect lovely thingies to pimp your modular, code your inputs and outputs with colours or just give a touch of beauty to your favourite gear!

Notes: 3,5mm TRS to male DIN 5

150cm length

Notes: Knurlies are the first screws specially designed for Eurorack - engineered with love by Befaco to make re-arranging your case a matter of minutes!

Knurlies can be fastened by hand, phillips, slot or allen, and include plastic washers to avoid rack-rash.

These screws are M3x7mm, so they can also be used on 3mm thick panels as well as regular 2mm ones.

Notes: Nine zip cable ties in 3 different colours. Light Grey, Dark Grey, and Red. Each pack contains 3 cable ties of each colour.

Notes: Somewhere between an analogue drum synth and a dub siren, the DS71 is a uniquely creative little box. Properly versatile, experimental stuff.

Supplier's Notes:
The DS71 is a synthesizer designed to easily create many different dub siren tones at your fingertips. It combines analog synth voicing circuitry with a powerful digital LFO that allows for quick access to different sounds at the press of a button. Inspired by the classic analog drum-synth modules and re-interpreted as dub siren.

Audio output: impedance balanced 1/4" TRS Jack

Trigger input: impedance balanced 1/4" TRS Jack

DC Input: 12VDC, 500mA, centre positive, 2.1mm x 5,5mm barrel type connector

Dimensions: 145mm x 130mm x 60mm

12VDC 1A power supply included.

Notes: For decades now, professional users all around the world have placed their trust in Beyerdynamic studio headphones. They remain the number one choice for music producers, sound technicians and broadcast users and are a firmly established piece of equipment in studios worldwide.

The DT 1990 PRO reference headphones combine these decades of expertise in headphone technology with the latest Tesla driver technology in an open-back design.

Thanks to its high-resolution and well-balanced sound the DT 1990 PRO sets new standards, not least in terms of design and workmanship.

Made in Germany:

As with all Beyerdynamic professional studio headphones, the DT 1990 PRO is also handcrafted in Germany. Backed by high-quality materials and meticulous workmanship, this high-end product is a long-term investment.

High-resolution sound:
Power and precision are critical requirements when it comes to sound reproduction. The efficiency of our latest Tesla driver technology is characterised by accurate resolution and high output power. Brilliant highs, a richly detailed midrange and precise bass combine to ensure sublime sound quality that is second to none.
Together with an ingenious open-back design, the high-resolution Tesla drivers ensure a wide, dynamic and extremely natural stereo image. Titanium-coated acoustic fabric and carefully selected precision-woven textiles round off the balanced sound quality.

Maximum wearing comfort:
The perfected design of the DT 1990 PRO combines innovation with decades of expertise in headphone technology. High-tech textiles and memory foam filled ear pads ensure exceptional wearing comfort. Headphones so comfortable you almost forget you are wearing them.

Open back design:
Natural and exceptionally spatial sound is achieved thanks to the open-back circumaural design. The optimised spatial sound reproduction makes the DT 1990 PRO headphones a reliable reference for mixing and mastering applications as well as for critical listening.

Two sound settings:
Choose between a well-balanced sound or analytical sound thanks to replaceable velour ear pads. Both ear pad variants are included to finish off this impeccable studio headphone package.

Durable construction:
The DT 1990 PRO is handcrafted in Germany. From a classy headband through to anodised aluminium yokes, these new studio headphones will impress with their exceptional craftsmanship and careful attention to quality and durability.

Technical data:
Transmission type: Wired
Nominal impedance headphones: 250 ohms
Weightheadphones without cable: 388 g
Headphone frequency response: 5-40,000Hz
Nominal sound pressure level: 102 dBSPL (1mW/500Hz)
Sound coupling to the ear: Circumaural (around the ear)
Cable & plug: 3-pin XLR plug, 6.35 mm (1/4") stereo jack plug, 3 m straight cable & 5 m coiled cable

Notes: The studio legends

For decades now, professional users all around the world have placed their trust in Beyerdynamic's classic range: DT 770/880/990 PRO. These benchmark-setting studio headphones, available in three different models, boast extremely detailed resolution and very transparent sound.

The DT 770 PRO headphones is the range's closed-back model and offers maximum flexibility and detailed sound that you can rely on.

Impressive sound volume

The Beyerdynamic DT 770 PRO headphones have established themselves as a firm favourite amongst music producers, sound engineers and broadcasters and are used in studios all over the world. They reproduce the entire frequency range with incredible precision, and even reproduce low frequencies in punchy detail.

Top-notch impulse response

The headphones are designed for critical music and sound monitoring, providing a perfectly neutral listening environment with exceptional isolation and top-notch impulse response. High frequencies are translated into an analytical and differentiated sound. Ultra-low bass sounds are defined and reproduced crisply.

Extreme comfort

The robust spring steel headband ensures a secure fit for the wearer. Soft ear cups mean that the headphones are comfortable even if worn for prolonged periods. The single-sided cable allows the headphones to be put on and taken off frequently without cables getting tangled.

Allrounder; universal studio

These 80-ohm headphones are the ideal Choice for a range of studio applications.

Made in Germany

The DT 770 PRO headphones are and always have been handcrafted in Germany. The durability of these headphones is worth noting, because all the components used are replaceable if necessary.

High-end studio quality

Thanks to the Tesla technology developed in Heilbronn, the DT 770 PRO offers even finer resolution with precise and powerful bass. The pro flagship also sets new standards in terms of wearing comfort and workmanship.

Technical specifcations

Transmission type: wired
Weight headphones without cable: 270 g
Transducer type: Dynamic
Operating principle: Closed
Nominal frequency response: 5 - 35,000 Hz
Nominal impedance: 80 O
Nominal SPL: 96 dB
Nominal T.H.D: < 0.2%
Power handling capacity: 100 mW
Sound coupling to ear: Circumaural
Ambient noise isolation: approx. 18 dBA
Nominal headband pressure: approx. 3.5 N
Weight: 345 g
Length and type of cable: 3 m / straight cable
Connection: Gold plated mini stereo jack plug (3.5 mm) & 1/4" adapter (6.35 mm)

Notes: Classic closed-back headphones in a low-impedance version designed to play nicely with outputs on phones, laptops and interfaces. One of the best all-round options for production.

Supplier's notes:
The Beyerdynamic DT 770 Headphones 80 Ohm are closed back dynamic headphones that use the same comfortable, sound isolating design as the 250 Ohm studio version, but with a lower resistance for general purpose and mobile applications. Because of the lower resistance, the DT 770 Pro 80 Ohm headphones are louder and work on low power devices such as smart phones, MP3 player, laptops and bus powered interfaces. Therefore, if you are working in a loud environment or using a battery operated device, the Beyerdynamic DT 770Pro 80 Ohm headphones make the perfect choice of headphone.

When out and about, you really need to block as much ambient noise out as possible and a lot of headphones do this by clamping the ear-pads as tightly to your ears as possible and using materials that absorb a lot of sound. This produces two unwanted issues; discomfort, after prolonged use; and a loss of audio quality as sound being generated by the driver is absorbed by the cup. The DT 700 Pro series avoids this by using a clever bass reflex system and a large circumaural cup design with velour pads. Of course the real technology is in the transducer itself, which produces a nominal frequency response of 5Hz to 35kHz and a nominal SPL of 96dB, an exceptional performance.

Notes: ***B-STOCK: Box opened, but product is in excellent condition and in perfect working order***


Classic closed-back headphones in a low-impedance version designed to play nicely with outputs on phones, laptops and interfaces. One of the best all-round options for production.

Supplier's notes:
The Beyerdynamic DT 770 Headphones 80 Ohm are closed back dynamic headphones that use the same comfortable, sound isolating design as the 250 Ohm studio version, but with a lower resistance for general purpose and mobile applications. Because of the lower resistance, the DT 770 Pro 80 Ohm headphones are louder and work on low power devices such as smart phones, MP3 player, laptops and bus powered interfaces. Therefore, if you are working in a loud environment or using a battery operated device, the Beyerdynamic DT 770Pro 80 Ohm headphones make the perfect choice of headphone.

When out and about, you really need to block as much ambient noise out as possible and a lot of headphones do this by clamping the ear-pads as tightly to your ears as possible and using materials that absorb a lot of sound. This produces two unwanted issues; discomfort, after prolonged use; and a loss of audio quality as sound being generated by the driver is absorbed by the cup. The DT 700 Pro series avoids this by using a clever bass reflex system and a large circumaural cup design with velour pads. Of course the real technology is in the transducer itself, which produces a nominal frequency response of 5Hz to 35kHz and a nominal SPL of 96dB, an exceptional performance.

Notes: Your studio headphones

DT 900 Pro X

Trusted sound meets performance and flexibility

In launching the open-back DT 900 PRO X, Beyerdynamic are unveiling circumaural studio headphones, which are set to usher in a era for the long-established, Heilbronn-based company. While the classics of the PRO series are regarded as reference products in professional studios all over the world, the PRO line is suitable for flexible use both in the studio and while on the move. It is all made possible by the STELLAR.45 driver that loudly reproduces the best sound in studio quality without any distortion - with all playback devices.

Professional audio quality

Trusted studio sound meets high performance

The STELLAR.45 sound transducer, developed and produced in Heilbronn, Germany, delivers that proven Beyerdynamic sound at previously unattained levels of studio-headphones-class performance. This is down to the neodymium ring magnet as well as copper-clad high-tech wire. The trade-off between electrical conductivity and the weight of the wire is unique. In combination with the three-layer speaker diaphragm featuring integrated damping layer, this has created a highly efficient driver system that performs superbly on all playback devices.

The innovative membrane structure controls the axial motion of the voice coil and ensures that it remains securely positioned in the magnet gap even during high oscillations. Another benefit is vast and natural frequency response. The fast response of the transducer and the detailed transient response, produced by the low coil weight, create a sound that is always reliable and distortion free even at high sound pressure levels.

Flexibility

Wide range of applications on all playback devices



Anytime, anywhere - the wide range of applications offered by the PRO X line unleashes your creativity. Be it on an audio interface, laptop, tablet or mobile phone: Thanks to the high-performance STELLAR.45 driver, the PRO X headphones with an impedance of 48 ohms reproduce sound at volume and power to familiar levels of studio quality - on all playback devices. The cable concept is also demonstrably suitable for everyday use: the removable mini-XLR cable can be swapped out as required to be replaced with cables that have different lengths or feature other connectivity options.

Superb wearing comfort

Tailored fit for extra-long sessions

The PRO X line also embodies what these professional headphones have always been synonymous with: maximum wearing comfort. The robust spring steel headband design assures the over-ear headphones provide a secure fit and ensures durability. The supple velour ear pads are soft to the touch, as you would expect, and guarantee superior ventilation. The headband ergonomically adapts to the shape of the wearer's head with the aid of soft memory foam and, like the ear pads, can be replaced if required.

Design & materials

Built to last, featuring a sleek, robust design

Black, minimalist and reduced to the essentials. In a word: PRO.

As far as the design of and materials used in the PRO X line are concerned, attention was paid to the resilience of all components: metal headband, GRP components, a robust mini-XLR connector and hard-wearing cable. This means you are geared up on a daily basis for any professional application.

Sustainability

Sustainable headphones - made in Germany

The PRO X line headphones have been designed for daily use in challenging conditions. This is why they are handmade in Germany using premium quality materials. If required, nearly all the headphones' components can be replaced, turning these headphones into an investment that makes sense for every creator.

Technical data

Transmission type: Wired
Earpad material: Velours
Nominal impedance headphones: 48 ohms
Weight headphones without cable: 345 g
Headphone frequency response: 5 - 40,000 Hz
Nominal sound pressure level: 100 dB SPL (1mW/500Hz)
Sound coupling to the ear: Circumaural (around the ear)
Cable & plug: 3 m or 1.8 m straight cable, detachable, with 3-pin mini XLR & stereo jack (3.5 mm & 6.35 adapter)

Notes: Modern classics. Open-backed design means they leak some sound but give a really clear impression of your music. Solid option for production work and mixing.

Supplier notes:
The DT 990 PRO is an open dynamic headphone for studio applications. Due to a weight reduction of the diaphragm an excellent sound reproduction quality is achieved. Its rugged design with a spring steel headband ensures a secure fit and withstands all demands. Soft headband and ear cushioning systems ensure a high comfort over long periods of time.

Beyerdynamic's DT PRO headphone series has it's roots in the early 1980s. Since then, millions of audio professionals from all parts of the world have become loyal users of beyerdynamic products. The series has been designed to cater for listening in a wide variety of environments, thanks to different headphone construction.

Notes: DT 990 PRO Black Edition

For decades now, professional users all around the world have placed their trust in Beyerdynamic's classic range: DT 770/880/990 PRO. These benchmark-setting studio headphones, available in three different models, boast extremely detailed resolution and very transparent sound.

The DT 990 PRO Black Edition is a technically identical design variation of DT 990 PRO headphones. It is the range's open-back model offering impressive spaciousness.

Benchmark for studio sound

These open-back studio headphones are a reliable tool for any sound enthusiast. The wide stereo image and three-dimensional sound reproduction make the beyerdynamic DT 990 PRO headphones a loyal companion for producers. Outstanding tonal depth ensures that even small changes in the positioning of the acoustic source can be perceived while mixing.

Incredible spaciousness

The circumaural headphones with their open-back design provide exceptional spaciousness and detailed tonal depth. Their mild bass and treble boost ensures a pleasant sound. The bass is not overstated but rather precise and the treble boost is powerfully present without sounding sharp.

Extreme comfort

The single-sided cable allows the headphones to be put on and taken off frequently without cables getting tangled, and soft, adjustable ear cups provide for added comfort. The robust spring steel headband design ensures that the over-ear headphones also offer a secure fit.

Difference compared to the DT 990 PRO

Soundwise, both models are identical as they feature identically designed acoustic transducers. First of all, they are distinguished by the black design elements and secondly, the Black Edition model is equipped with a straight 3m cable and the standard version with a spiral cable.

Professional devices

With an impedance of 250 ohm, the DT 990 PRO headphones are perfect for mixing in the studio.

Durability

One aspect that sets these products apart from the rest is that they are handmade in Germany. The durability of Beyerdynamic's products is worth noting because all the components used are replaceable if necessary.

Made in Germany

The DT 990 PRO headphones are and always have been handcrafted in Germany. With their high-quality materials and meticulous workmanship, these studio headphones are a sound, long-term investment.

High-end studio quality

Thanks to the Tesla technology developed in Heilbronn, the DT 1990 PRO offers even finer resolution with precise and powerful bass. The PRO flagship also sets new standards in terms of wearing comfort and workmanship.

Technical specifications

Transmission type: Wired
Weight headphones without cable: 250 g
Transducer type: Dynamic
Operating principle: Open
Nominal frequency response: 5 - 35,000 Hz
Nominal impedance: 250 ? / system
Nominal SPL: 96 dB
Nominal T.H.D: < 0.2%
Power handling capacity: 100 mW
Sound coupling to ear: Circumaural
Nominal headband pressure: approx. 3.5 N
Weight: 340 g
Length and type of cable: 3 m / straight cable
Connection: Gold plated mini stereo jack plug (3.5 mm) & 1/4" adapter (6.35 mm)

Notes: Based on the legendary Roland Jupiter-8, the ISE-NIN is a synth with the attention to detail we've come to expect from Black Corporation. Eight voices, fully analogue, with MPE support. Beautiful.

Supplier's Notes:
ISE-NIN (pronounced ee-seh-nin) features eight voices, each consisting of 100% analogue voltage controlled oscillators, analogue lowpass and highpass filter, noise generator, two ADSR envelopes and a VCA. 2 different presets can be layered, making richer sounds, but limiting voices amount to 4 per layer. Each layer has its own fully assignable velocity and poly-aftertouch controls and global MPE settings.

Furthermore the synth offers full MIDI/USB control and the ability to store 128 presets per bank across 10 banks. Sophisticated microtuning with a support of ODDSound MTS-ESP and a signature arpeggiator integrates this classic synth concept seamlessly into the future of your modern studio needs.

Design: 19" / 4U
Polyphony: 8
Sound Generation: Analogue
MIDI interface: 1x In, 1x Out/Thru
Storage Medium: Internal
USB-port: Yes
Effects: No
Arpeggiator: Yes
Number of Analogue Outputs: 2
Digital Output: No
Display: Yes

Notes: An absolute essential for any studio juggling outboard, effects processors, consoles or multiple synths, Black Lion's PBR TRS is an organised audio engineer's best friend.

From Black Lion's PBR range of patchbays, the bestselling PBR TRS runs 96 audiophile-grade gold-plated TRS connectors with normal/half-normal switches for each stereo set.

PBR TRS is built to be just at home on the road as in the studio, and features an incredibly hard-wearing black-anodised face plate, armed with white labelling tags for each channel for users to mark their own inputs.

Specifications

Number of Points 48
Front Connectors 48x 1/4" TRS
Rear Connectors 48x 1/4" TRS
Dimensions 534 x 102 x 51mm, 1.4kg (boxed)

Notes: Armed with gold plated quarter-inch TRS jacks and built-in Bluetooth, Black Lion's PBR TRS BT is a future-proof patch bay built for the next technological frontier.

Black Lion's TRS BT model from their PBR range is a 46-point patch back with 94 audiophile-grade 6.35mm gold-plated TRS connectors. TRS BT features to operating modes (normal and half-normal) which can easily be toggled using a switch situated on the ruggedly anodised front panel.

For patching in modern devices at lightning speed and with zero-cabling, the TRS BT also features built-in Bluetooth connectivity. In true Black Lion fashion, every BLA-installed Bluetooth module is modded to support full lossless audio for listening and sampling at optimum resolution.

Specifications

Number of Points: 46
Front Connectors: 23x TRS Jack
Rear Connectors: 23x TRS Jack, 2x TRS Jack (BT out), USB-C
Dimensions: 534 x 102 x 51mm, 1.4kg

Notes: Black Market Modular's patch cords are characterized not only by beautiful colours but also their only 8mm wide and 25mm high plug. Thereby they are adequate for dense patches and they also fit really well into Stackcables. The cable is flexible yet not wishy-washy but also not too stiff - just perfect! They ship coiled and not twisted so you don't get that permanent kink.

Notes: Black Market Modular's patch cords are characterized not only by beautiful colours but also their only 8mm wide and 25mm high plug. Thereby they are adequate for dense patches and they also fit really well into Stackcables. The cable is flexible yet not wishy-washy but also not too stiff - just perfect! They ship coiled and not twisted so you don't get that permanent kink.

Notes: Black Market Modular's patch cords are characterized not only by beautiful colours but also their only 8mm wide and 25mm high plug. Thereby they are adequate for dense patches and they also fit really well into Stackcables. The cable is flexible yet not wishy-washy but also not too stiff - just perfect! They ship coiled and not twisted so you don't get that permanent kink.

Notes: Bocuma's own line of patch cables. Pack of 5 high quality cables, 3.5mm.

Available in packs of gray or black.

Each package includes:

2x 30cm
2x 60cm
1x 90cm

A good system requires a diet rich in NUDOLS: Organic Patch Cables.

Notes: Bocuma's own line of patch cables. Pack of 5 high quality cables, 3.5mm.

Available in packs of gray or black.

Each package includes:

2x 30cm
2x 60cm
1x 90cm

A good system requires a diet rich in NUDOLS: Organic Patch Cables.

Notes: Digital lightpipe optical audio cable.

Notes: Custom backpack for the BOSS RC-505mkII and RC-505 Loop Stations

Transport your RC-505mkII or RC-505 in style with the CB-RC505, a premium backpack-style carrying bag for BOSS's popular tabletop Loop Stations.

The slimline design is light and easy to carry, while the plush internal padding fully protects your RC when you're on the move. There's also a sub-compartment for stowing a laptop or tablet, plus a large outside pocket for essential looping accessories.

Creative Magic Everywhere You Go

The RC-505 series eliminates the need to carry lots of additional gear, thanks to its onboard multi-effects, integrated mixing features, and versatile connectivity options. This bag's slim design is just right for users of the tabletop Loop Station, trimming unneeded bulk while providing a protective home for the instrument and core items you need to create and perform.

Smart Onboard Storage

The outside pocket on the CB-RC505 is big enough for a mic, headphones, AC adaptor, and cables, standard accessories for beatboxers and other vocal-based loop performers. And with the flat pocket inside the main compartment, you can expand your creative setup with a laptop or tablet. If you're a looping instrumentalist who needs more room for foot pedals and other external gear, the CB-BU10 Utility Gig Bag is an ideal option.

Premium Construction

The CB-RC505 is built to last with quality materials and construction throughout. The water-resistant nylon exterior is rugged and protective, and there are two thick rubber feet for impact protection when setting the bag on the ground. The padded top handle is comfortable to grab and reinforced for years of travel, and you can easily hide the backpack straps in dedicated pockets when they're not needed.

Custom backpack for the BOSS RC-505mkII and RC-505 Loop Stations
Rugged construction with water-resistant nylon
Plush interior with thick padding
Hideaway backpack straps and handle with comfortable padding
External pocket for a microphone, AC adaptor, and other accessories
Slim sub-compartment for a laptop or tablet
Thick rubber bottom feet
Heavy-duty zipper with custom BOSS pull

Specifications

Compatible Models: RC-505MK2, RC-505
Main Material: Nylon cloth (front cloth), Polyester (inner cloth)

Size & weight
Dimensions (excluding protruding parts):
470 (W) x 310 (D) x 185 (H) mm
18-9/16 (W) x 12-1/4 (D) x 7-5/16 (H) inches
Weight: 1.28 kg / 2 lbs 14 oz

Notes: Wireless Foot Control for Digital Music Scores, YouTube, DAWs, Instruments, and Beyond

Ultra-compact and fully customizable, the FS-1-WL is an essential hands-free partner for all your creative needs. Control digital music score apps, YouTube videos, DAWs, and supported BOSS and Roland gear wirelessly over Bluetoothr. Or connect a MIDI cable to operate multi-effect processors, pedals, and other hardware. Expand your setup with external footswitches and an expression pedal. And use the dedicated editor/librarian to assign keyboard commands and MIDI messages to control nearly any software application or MIDI device.

Cable-Free Control for Your Creative World

The FS-1-WL flows smoothly into all your creative activities. Easily pair with devices over Bluetooth to operate a wide range of software apps and music gear.

Music Page Turner

Turn pages in digital music scores with the footswitches as you play. For example, you can move forward as you perform or page back to work on specific areas.

YouTube Learning

Take advantage of YouTube keyboard commands to learn faster with online lesson content. Keep your hands on your instrument and use your feet to control play/pause, rewind, playback speed, and more

DAW Control

Stay focused on capturing great performances with hands-free control of music recording software. Operate record, play, and other keyboard commands in your DAW. Or use the software's MIDI learn tools to configure setups on the fly.

BOSS and Roland Gear

Wirelessly change presets, control effects, and more on Bluetooth-equipped products like Pocket GT, Katana-Air, and Waza-Air, or the GX-100 via the Bluetoothr Audio MIDI Dual Adaptor. And control MIDI keyboards, hardware devices, and computers over Bluetooth using Roland's WM-1 and WM-1D.

Customizable Command

Using the FS-1-WL editor app on your computer or smartphone, you can change up the pre-configured setups to operate just about any software application or MIDI device. Assign keyboard commands to the footswitches, either single keystrokes or combinations with modifier keys like shift and control. Or call up MIDI mode and set up custom PC and CC messages for your devices. You can also create a library of configurations for different needs.

Built Like a BOSS

Backed by decades of BOSS design expertise, the FS-1-WL is comfortable to use and built to last. The footswitches are quiet and easy to press, with no click noises to interrupt your workspace or performance stage. Status LEDs provide high visibility and can be set to different colors with the editor app. Two AAA alkaline batteries offer up to 14 hours of operation on the move, and AC power is supported with an optional BOSS PSA adaptor.

Versatile Connections

Up to two external footswitches can be connected for expanded control with both MIDI messages and keyboard commands. And with an external expression pedal, you have continuous parameter control of any device that responds to MIDI CC messages. The FS-1-WL also features a TRS MIDI jack for wired operation of MIDI hardware devices.

Specifications

Controls:

POWER switch
Bluetooth button (INSTRUMENT)
Bluetooth button (Smartphone/PC)
Pedal switchs (L, C, R)
Indicator:

Power:

Bluetooth (INSTRUMENT)
Bluetooth (Smartphone/PC)
Pedal indicators (L, C, R)

Connectors:

DC IN jack
CTL 1, 2 jack: 1/4-inch TRS phone type
EXP jack: 1/4-inch TRS phone type
MIDI OUT jack: stereo miniature phone type
USB port: USB B
Power Supply: Alkaline battery (AAA, LR03) x 2, AC adaptor (sold separately)
Current Draw; 65 mA

Expected battery life under continuous use (These figures will vary depending on the actual conditions of use.)
Alkaline battery: 14 hours

Accessories:

Owner's Manual
Leaflet "USING THE UNIT SAFELY"
Alkaline battery (AAA, LR03) x 2

Options (sold separately)
AC adaptor: PSA series
Footswitch: FS-5U
Dual footswitch: FS-6, FS-7
TRS/MIDI connecting cable: BMIDI-5-35, BMIDI-1-35, BMIDI-2-35, BCC-1-3535, BCC-2-3535

Size & weight

Width: 207 mm / 8-3/16 inches
Depth: 77 mm / 3-1/16 inches
Height: 32 mm / 1-5/16 inches
Weight: 258 g/10 oz

Notes: Set consisting of two 2TE blind plates suitable for Tiptop Audio's Buchla 200 series.

Features:

Manufacturer: Tiptop Audio
HP: 2
Colour: Silver
Blind panel: Yes

Notes: Banana cable for modular systems, as used by companies such as Buchla. The length is 101,6 centimeters.

Patch cable with banana plugs.

Length: 101,6 centimeters

Color: Violet

Notes: Banana cable for modular systems, as used by companies such as Buchla. The length is 12.7 centimeters.

Patch cable with banana plugs.

Length: 12.7 centimeters

Color: Violet

Notes: Banana cable for modular systems, as used by companies such as Buchla. The length is 25,4 centimeters.

Patch cable with banana plugs.

Length: 25,4 centimeters

Color: Orange

Notes: Banana cable for modular systems, as used by companies such as Buchla. The length is 50,8 centimeters.

Patch cable with banana plugs.

Length: 50,8 centimeters

Color: Green

Notes: Banana cable for modular systems, as used by companies such as Buchla. The length is 76,2 centimeters.

Patch cable with banana plugs.

Length: 76,2 centimeters

Color: Blue

Notes: Banana Shorting Bar for synthesizers and modular systems made by Buchla.

Shorting Bar with banana plugs. The color may vary.

Notes: Latest incarnation of Buchla's legendary modular synth. Massively creative with incredible sound and history stretching all the way back to the 1960s.

Supplier notes:
The evolution of the legendary modular analog synthesizer by Don Buchla. The Buchla Easel Command is the newly updated 208C in a standalone desktop form with MIDI and CV control.

Buchla's own Joel Davel led the charge to create a new version of the legendary Music Easel instrument with more modular flexibility and independence, while also providing the means to easily interface with more devices, such as the various DAWs like Ableton and MIDI controllers, including the very expressive Sensel Morph. It's still fully analog in its default configuration and provides the unique and exquisite Buchla experience with greater functionality at a lower cost.

Notes: ***B-STOCK: Item refurbished, repaired and in perfect working order.***


Latest incarnation of Buchla's legendary modular synth. Massively creative with incredible sound and history stretching all the way back to the 1960s.

Supplier notes:
The evolution of the legendary modular analog synthesizer by Don Buchla. The Buchla Easel Command is the newly updated 208C in a standalone desktop form with MIDI and CV control.

Buchla's own Joel Davel led the charge to create a new version of the legendary Music Easel instrument with more modular flexibility and independence, while also providing the means to easily interface with more devices, such as the various DAWs like Ableton and MIDI controllers, including the very expressive Sensel Morph. It's still fully analog in its default configuration and provides the unique and exquisite Buchla experience with greater functionality at a lower cost.

Notes: Buchla's touch-sensitive keyboard updated for the 21st century. Third-generation version offers expressive control for Buchla, MIDI and Eurorack. Iconic.

Supplier's Notes:
Though our lives are dominated by touchscreens, when it comes to music, there's still a lot of magic in capacitive touch control. Don Buchla was one of the first to apply this technology to electronic music in the Buchla 112 module. The non-traditional sounds were controlled with a futuristic interface. This fantastic idea met many iterations in Buchla history: the Music Easel, 400, 700, Thunder, and 223 all employed touch technology.

Buchla USA is proud to present the third iteration of one of the most used touch interfaces, the 218, as the LEM218v3: The 218e version3 Lunar Excursion Module. The first design appeared in the 1973 release of the Buchla Music Easel and named for the spacecraft that delivered astronauts to the moon. Providing the familiar piano key layout for this early mobile music machine, the additional controls and capabilities were an interface for exploring uncharted musical territory. With the new version 3, it's been updated with a new foundation of stable, modern electronics and plenty of inputs and outputs to integrate with your Buchla, MIDI, and Eurorack gear.

Capacitive Magic

The incredible sensitivity and accuracy of the redesigned touch bed means the lightest touch will produce triggers and control voltage for your setup. The adjustable sensor has the dynamic range and durability to handle your playing. The new texture not only improves the sensing, but provides a satisfying tactile experience.

As always, pressure is an expressive output, adding an extra dimension to the control. MIDI outputs velocity and polyphony, as well as channel pressure, making the LEM218 a uniquely expressive controller for all your synthesizers. The configurable touchstrip adds a fantastic addition for pitch bend or as an additional modulator to patch into your system.

MIDI Polyphony, Velocity & More!

More than just MIDI compatible, the LEM 218 v3 gives you a unique interface to playing your existing MIDI gear and soft synths. Each touch outputs note name, channel pressure, and velocity for every note, along with sustain controls from a pedal. Polyphonic MIDI mode lets you play chords. The touchstrip can act as a pitch bend control, or as a mod wheel for additional expressive control. Easily configured using the front panel controls, you can send notes and controls on any MIDI channel. Send the LEM some MIDI, and it gets converted to voltages and gates for eurorack and Buchla control.

Get More For Your Euro

Even if you don't have any Buchla products, the LEM 218 v3 is designed to work with your Eurorack-compatible gear. Four 3.5mm jacks output 1v/octave pitch, 0-8 volts pressure, touchstrip voltage, and gate outputs for use with Eurorack equipment. Or, combine your Euro with your Buchla instruments. If NATO can do it, so can you. The sound design possibilities will blow your mind.

Arpeggiate

A pulse input allows the arpeggiator to be driven by external inputs and are allowed to interact with the automated notes to make the pattern more complex. Additional controls allow you to blend different patterns and randomness to easily change from the expected to the surprising.

Control

The classic preset voltage knobs offer several possible ways to shift your sounds into new territory. Not only can the knobs be used for quick access to voltages for your patch, they can control arpeggiation modes and octave shifting. Pads output pulses for additional control

Set It Up Your Way

Such a unique device will spark many ideas. With easy front panel configuration, you can quickly customize the velocity and pressure sensitivity, MIDI channel, knob behavior, and more. No cumbersome software setups, just simple settings with the keys and knobs, and you're ready to play.