Back catalogue: Studio Equipment

Notes: Complete your content creation battlestation with this snazzy desktop boom arm. Simply clamp it to your desk, attach the mic, run your cable with the included straps and boom, you're good to go. Easy to adjust and Built-Like-a-Tank, this is a must have accessory for your EleMent mic.

It's the perfect companion for (almost) all EleMent microphones!

Compatible with: EM-91CU, EM-USB, Carbon

Please note: The microphone is not included in this purchase, it si shown for demonsatration purposes only.

Notes: The Flex premium broadcast-style boom arm is a key element to any ergonomically sound, clutter-free setup. An internal spring design and integrated cable routing channel deliver seamless design and operation while remaining visually appealing. Content Creators, Podcasters and Musicians can all benefit from the freedom and efficiency achieved by the Flex. Flex is the perfect solution for many of MXL's most popular microphones like the 770, 990, and BCD-1.

Gone are the days of that clunky boom arm drooping down while trying to record the perfect podcast. Flex's internal suspension system and adjustable weight calibration ensure that your mic will stay put so you can keep your focus on creating. A sleek, modern design allows you to add the functionality of a boom arm without the eyesore of another "thing".

Boom: Extruded Aluminum

Mount: Desktop C Clamp

Rotation: 360 degrees

Max Reach: 32"

Mount thread: 5/8" threading with a 3/8" adapter

In the box:

Flex boom arm
C-Clamp for desktop
3/8" to 5/8" adapter

Notes: A metal professional standard floor microphone stand with boom arm that is adjustable for height, angle and extension. The product features tripod style foldaway legs and has a remarkable stability when in use. The Boom arm extends 760mm.

Notes: Professional Broadcast Boom Arm

The PBA-2 Professional Broadcast Boom Arm gives you a sturdy, highly articulated solution for a hands-free streaming setup with nearly any microphone-while keeping your cables tidy and your broadcast looking good.

Rugged boom arm with adjustable tension is suitable for for use with light or heavy microphones; Five articulation points make precision mic placement easy; Cable channels keep your microphone cable hidden and tidy; 5/8" male to 3/8" female adapter included for use with standard mic mount threadings.

Create a hands-free recording and streaming environment while simultaneously isolating your voice from the sounds of your mouse and keyboard. The PBA-2 Professional Broadcast Boom Arm gives you a sturdy, adjustable solution to get your mic up off your desktop and in front of your attractive face where it belongs. No more hunching over your desk to reach your mic!

The PBA-2 sports five points of articulation, so you'll always be able to position your mic exactly where you need it to be. It also includes an adjustable tension control, making it suitable for use with both heavy and lightweight mics, and the built-in cable channels hide your XLR cable within the boom arm itself, keeping your steams looking tidy and professional. Thread adapters for standard microphone mounts are included.

Notes: COLORS 3 is a set of 4 coloured windshields, cable identification rings and tags as well as a sticker sheet for use with the Wireless GO, Wireless GO II and Lavalier II.

This set is designed to make it easy to keep track of who is using each microphone in multi-mic setups by allocating a different colour set for each lavalier, transmitter and linked receiver.

Notes: The DeadCat VMP is a furry wind cover for the VideoMic Pro, designed for use in windy environments.

Its artificial fur is specially designed so as to minimise wind noise while remaining acoustically transparent.

Notes: The DS2 is a compact desktop studio arm that's ideal for microphones, cameras, smartphones, lights and other accessories up to 900g. With its heavy base stand, there's no need for clamps or mounting points - simply sit it on your desk or other flat surface. It features two pivot points so you can quickly reposition your equipment, and its integrated cable guide slots will ensure your desktop remains tidy.

Weight (grams): 1471g
Dimensions (millimetres):
Length: 170mm
Width: 120mm
Height (folded): 190mm
Height (extended): 380mm
Maximum Capacity: 900g

Compatible Products (including, but not limited to): Can be used with any microphone, accessory or other product that is under 900g and either features or is compatible with an accessory that has a 3/8" or 1/4" thread mount.

Thread Mount: 3/8"-16 UNC Thread (1/4"- 20 UNC adapter included in the box)

In The Box:
DS2 Arm
DS2 Base
M4 Screws (x2)
3/8" to 1/4" thread adapter
M3 Hex key
Quick Start Guide

Notes: ***B-STOCK: Box opened, product in perfect working order***


The perfect suspension shock mount for the Procaster or Podcaster, the Rode PSM1 removes the ability for external vibrations to manipulate the microphones positioning.

The PSM1 gives you a sense of confidence when using your microphone in environments where there is a lot of movement that may interfere with the microphones performance.

Notes: The Charge Case is a handy charging case for the Wireless GO II. It accommodates both transmitters and the receiver and features an integrated battery that facilitates three full recharges for up to 30 hours of continuous use. With a rugged enclosure and zip system, it is also perfect for protecting the Wireless GO II when in transit or storage.

Notes: The WS12 is a professional-grade windshield for the RODE VideoMic GO II microphone. Featuring open cell foam covered by synthetic fur, it is designed to minimise wind noise and plosives when recording. Includes a wind seal made of synthetic rubber to block any unused sockets (USB-C or 3.5mm) on the microphone, preventing wind entering the rear of the microphone.

Specifications:

Weight (grams): 19
Dimensions (millimetres): Length: 98.5, Diameter: 85
Compatible Microphones: VideoMic GO II

Notes: Overcovers have been specifically designed for use with small personal microphones in windy outdoor conditions.

Using stickies to affix the Lavalier Mic onto the skin or on top of clothing, Overcovers also include a fur Windjammer (Furry) to be adjusted on top of the Lavalier microphone for excellent wind-noise protection.

Notes: Stickies are double-sided adhesive pads, used to affix small, personal microphones directly onto the skin or on top of clothing. The pads are sandwiched with a soft fabric to prevent the mount from creaking when the mic is attached. The materials used are hypoallergenic.

Notes: Undercovers have been specifically designed for use with Lavalier mics under clothing.

Using Stickies to affix the microphone, a soft fabric disc is then added on top to minimise the sounds of clothing rustle and low wind noise.

Notes: ***B-STOCK: Box damaged, product in perfect working order***


The original, patented, portable acoustic treatment device: the Reflexion Filter PRO.

Beautiful concert halls, gigantic high-ceilinged spaces, lofty stairwells with glorious natural reverb...capturing the sound of an acoustically-pleasing room can make a great recording truly special. But getting a good sound in a bad space is very, very difficult.

What if you're an artist recording at home? What if you don't have the budget for a properly treated studio? What if you move to a new house or apartment?

Since sE invented the Reflexion Filter in 2006, over 120,000 units have made their way into studios and homes worldwide - and it remains the indisputable industry standard for portable, effective acoustic treatment.

How does it work?

When you put a microphone in front of you, it doesn't just hear you - it hears the room around you.

Even if it's a cardioid mic and is listening mostly to just you, it's still picking up reflections from your voice or instrument that are bouncing off the walls and coming back to the mic. The goal of acoustic treatment is to minimize the pickup of such reflections so your primary sound source comes through as pure as possible.

So why not just put some cardboard or foam behind the mic?

Some materials are good at absorbing or reflecting particular frequencies - for example, foam absorbs highs really well, but does nothing for lows.

Unlike cheap foam RF imitations, sE's patented multi-layer technology works evenly across the whole frequency spectrum to ensure a balanced, even sound with no coloration at all.

This is what makes the Reflexion Filter unique, and makes it the choice of the biggest recording artists in the world - whether they're working in untreated rooms, or working in a professionally-designed studio and just need a little more isolation.

Ultra stable hardware:

In 2016, sE completely redesigned their RF Pro's mounting hardware to increase stability, simplify ease of use, and provide an updated level of performance, durability, and aesthetics.

It allows panning and tilting for maximum flexibility, and all moving parts are chromatized to ensure low wear. The extra stability means that your RF Pro can be positioned solidly at any angle to help provide a "dry" sound when recording any source - vocals, acoustic and electric guitars, amplifiers, drums, room mics, strings, and countless other instruments.

In the box:

- Reflexion Filter Pro
- Mounting bracket
- Screw wrench
- Mic stand thread adapter

Notes: The Boom Arm is specified to hold up to 500g. Microphones include the Profile, MK 4, MK 8, TLM 102, TLM 103, MD 421, and more - please note that a shock mount will add additional weight, so be mindful if extending the arm fully.

3-point self-locking boom arm (with cable management and adjustable desk clamp)

780 mm (horizontal reach)
820 g

Notes: Durable table stand with 3/8" and 5/8" mounting options.

Notes: Microphone foam windshield with an internal opening of 35 x 60mm.

Notes: Microphone stand with a heavy black cast base. Supplied with microphone clip.

Notes: RCC 2U Rack Ears give you all of the control and convenience of the MRCC - MIDI Router Control Center in your standard 19" rack! MRCC is 2U.

Requires an MRCC, sold separately.

Order the MRCC 2U Rack Ears for delivery with MRCC when ordered from Conductivelabs.com shop.

Orders ship from Conductive Labs' Hong Kong based fulfillment warehouse.

Includes: Left and Right 2U Rack Ears
Ears are made of powder coated steel
Remove the Desktop endcaps and use the same screws to attach the Rack Ears

Additional information
Weight: 0.096 kg
Dimensions: 10 × 8 × 4 cm

Notes: The ideal MIDI routing solution for those with large hardware setups, the MRCC 880 simplifies MIDI setup over a range of DIN, USB and 3.5mm TRS connections, including preset storage and advanced options like filtering and merging.

Supplier's Notes:
Essential MIDI patch bay features give you exactly the connectivity you require. Slim, beautiful, and easy to configure without a PC, the MRCC 880 gets you quickly setup and productive

MRCC 880 - MIDI Router Flexibility, Configuration Without a PC

The MRCC 880, with dedicated per port routing buttons, makes routing MIDI connections super quick! Simply select an input, then pick which outputs to route to. MIDI merging is automatic. Status and activity are displayed on per-port LED indicators. More advanced features such as Filtering, Channel Split, Panic and MIDI monitoring are configured with dedicated buttons. When your performance setup is complete, save it for recall later. All without needing a PC for configuration.

Essential Features for Your MIDI Studio

When you need the matrix MIDI patching of a MIDI Router, or you have outgrown a MIDI thru box or 1×1 USB MIDI interface, the MRCC 880 is what you are looking for. It has just the right number of inputs and outputs for a small desktop or live jamming rig:

4x 5-pin DIN inputs, plus a shared 3.5mm MIDI TRS
4x 5-pin DIN outputs, plus a shared 3.5mm MIDI TRS thru
4x USB MIDI virtual Inputs and Outputs
It's killer for DAW-less jamming, but of course you can use it in the studio as a USB MIDI interface for your PC, Mac, or tablet. It's great for playing stand-alone soft synths, or connect it to your DAW and plug-in instruments. With the dedicated routing buttons, you can choose which inputs get routed to which output(s) at any time.

Specifications

Requirements

Power:

USB 2.0, 5V DC, 80mA, USB type B connector

USB Power Supply not included. Power from your PC or other host port, or for use without a PC, power with a USB charger or USB battery

USB MIDI Interface:
Works with PCs, Mac, Tablets and most other USB hosts that support a USB MIDI Class Compliant device.

Firmware Updates:
Requires a Windows PC, macOS or other computing device that supports USB mass storage mode.

Limited Warranty

Conductive Labs LLC provides a limited warranty for 1 year (or the minimum required by law in your country) to the original purchaser with proof of date of purchase. In case of failure due to defects in material or workmanship, for the duration of the warranty period, Conductive Labs will repair or replace the device at their discretion. If a replacement is not available, it may be replaced with a device of similar functionality.

MIDI I/O
Ports:

4x 5-Pin DIN, and 1x 3.5mm TRS (Type A) optically isolated Inputs.1
4x 5-Pin DIN, and 1x 3.5mm TRS (Type A) thru Outputs. Traditional 5V MIDI spec for maximum compatibility with vintage gear.
1x USB 2.0 Type B device port for computer connection with 4x USB MIDI virtual inputs and outputs.
1 First input pair, choose one of the 2 jacks; 5-pin DIN or 3.5mm MIDI type A
*Unlike MRCC MIDI Router Control Center, MRCC 880 is not expandable, or compatible with MRCC expansion modules such as Remote 7 or XpandR.

Features:
Save/Load
4x Save slots
1x Init (clears settings)

Filters (per input):
MIDI Clock
Stop/Start/Continue messages

Panic button:
Sends MIDI "All Notes Off" to routed ports.

Channel Split:
Select an input and the channels will be split sequentially to the 4 DIN outputs.
For example, when Chan Split enabled for Input 1:
Output port 1 will send MIDI channels 1, 5, 9 and 13.
Output 2 channels 2, 6, 10, 14.
Output 3 channels 3, 7, 11, 15.
Output 4 channels 4, 8, 12, 16.

The MRCC 880 MIDI Monitor button to optionally indicate MIDI activity on port LEDs.
The MIDI Merging is automatic. Just select the same output from a different input.
This product also has a Dedicated Power Switch.

Notes: Serious control power with this unique MIDI router. A total of 11 MIDI inputs and 17 outputs plus two thru ports allows you to connect a wealth of MIDI gear, filter, map, merge and route with huge flexibility.

Supplier's Notes:
Following on from the NDLR, an innovative Multi-part Polyphonic Arpeggiator, Conductive Labs have set out to reinvent the MIDI Router. Why? Because there's nothing like it!

It's super deluxe: featuring one button routing for each physical input and output, RGB LEDs, and OLED graphical display, everything can be easily setup without a PC. Unlike devices with front and rear facing connectors, MRCC's vertical ports are designed to have the smallest footprint, saving your desk space for more synths!

Massive MIDI I/O: 11 inputs and 17 outputs, including 5 PIN DINs, 3.5MM MIDI jacks in both flavours, 4 USB host ports, and a USB client (PC, Mac or tablet) connection with 12 MIDI ports. With automatic merging, MIDI master clock with CV clock out, filtering and MIDI effects, and MIDI message monitoring.

Expand and extend your outputs up to 50' away with the MRCC Remote 7. Need even more? Connect 2 MRCC's together with a single cable for remote routing up to 32' (10m) apart. MRCC is Rack mountable too, with the available 2U Rack Ears.

User Centered Design
All MIDI cables plug vertically into the top panel which frees up valuable table space. The top panel graphics connect each button-jack pair so you know exactly which device you are routing or filtering.

Routing MIDI paths and configuring MIDI filters is easy with the full colour LEDs and the one button per input / one button per output front panel layout.

Modern Connectivity
11 inputs and 17 outputs, including 5 PIN DINs, 3.5MM MIDI jacks (in both type A and type B flavours), 4 USB host ports (with 4 virtual USB MIDI input ports each), and a USB client (PC) connection with 12 virtual USB MIDI ports. Everything you could want for connecting MIDI gear in your studio.

Advanced Functionality
For more advanced tasks use the graphical interface on the sharp colour OLED display. Using the tabs and folders style UI with the cursor buttons and encoder makes navigation simple. Once the MRCC is configured, save it to memory for recall later. All this with no confusing PC app.

Expandable
The optional MRCC Remote provides a convenient, clean solution for getting MIDI outputs to a remote location, such as into a 19" rack or to your keyboard stand. The Remote is connected to MRCC with a single shielded Ethernet cable, eliminating a bundle of long MIDI cables.
If you need even more ports, connect two MRCCs together!

Accessories
Expand the MRCC with the MRCC Remote 7. It adds 5x routable 5 pin DIN connectors, with 2 shared 3.5MM TRS (in both A and B flavours). It comes with a 10 meter (32') Ethernet cable to get MIDI outputs to where you need them, without a bunch of long MIDI cables.

Rack mount the MRCC with 2U Rack Ears. These strong, powder coated steel rack ears mount the MRCC in a standard 19-inch rack.

*Accessories sold separately.

THE HARDWARE
Requirements:

International AC/DC power supply included
Input: 100~240V AC
Output: 5.25V DC, 3A USB-PD type C connector
USB Host ports only for USB MIDI class compliant devices, or USB PC keyboard for entering labels
MIDI input devices and sound modules that meet MIDI standards, including MPE (MIDI Polyphonic Expression) devices are supported
Personal Computer (running Windows, OSX or Linux) for firmware updates.
Physical Layout:

Dims: 15.5" x 3.5" x 1.9"
28 routing buttons, plus remote routing button and stand-by button
Colour OLED Screen
Encoder and navigation buttons
Power switch
Recessed firmware update button
Physical Input/Output:

5x MIDI 5-Pin DIN Inputs
2 jack selectable 3.5MM TRS MIDI (type A and B) input (shared with 1x 5 pin DIN), choose 1 of the 3
2 jack selectable 3.5MM TRS MIDI input (MIDI type A and B) choose 1 of the 2
All MIDI Inputs are optically isolated, and traditional 5V MIDI spec Outputs
4x USB 2.0 USB MIDI Host ports (4 virtual ports per In and 1 per Out)
1x USB Device port for connecting to a PC or tablet. With 12 individually routable USB MIDI virtual I/O ports (16 channels per port = 192 channels in and out).
10x MIDI 5-Pin DIN Outputs
4x 3.5MM TRS (2x type A and 2x type B, thru) can be used simultaneously
1x Clock Out 3.5MM jack (use a mono (TS) cable)
1x RJ45 for optional MRCC Remote 7 or MRCC to MRCC connection (not Ethernet)
Limited Warranty:

MRCC comes with a limited warranty to the original owner for 1 year (or the minimum time required by law in your country) from the time you received it.

The MicroSD card and accessories have a 90 day limited warranty.

Notes: Cleanly and conveniently extend the MRCC's MIDI outputs with the Remote 7! Adds five routable 5 Pin DINs, plus two shared 3.5MM TRS MIDI jacks (one MIDI TRS standard type A, and one type B) over a shielded Ethernet cable. A 10-metre (32 ft.) Ethernet cable is included and automatically added to your order.

This requires the MRCC, which is sold separately. Only one Remote 7 can be connected to an MRCC. If you are connecting 2 MRCC together, you will need a custom RJ45 splitter (coming soon) to use the Remote 7. See the forum for details.

Order the MRCC Remote 7 for delivery with MRCC when ordered from Conductivelabs.com shop.

The orders ship from Conductive Labs' Hong Kong based fulfillment warehouse partner.

Included with the Remote 7 is a 10 meter (32') Ethernet cable* to connect Remote 7 to MRCC.

*If you want to use your own Ethernet cable, it must have shielded connectors that are connected to each other via a drain wire in the cable. CAT6a (or better) Ethernet cables with shielded connectors (metal shrouds over the connectors) are typically connected in this way.

The connections from the RJ45 on MRCC to the Remote 7 are MIDI, and those signals are not actively repeated. In theory you should subtract the length of the Ethernet cable from the max length coming out of the Remote 7. That is, if you have a 30' Ethernet cable from MRCC to Remote 7, subtract 30 from 50 for the max cable length from a Remote 7 output. In practice, when using good quality MIDI cables you can probably use a 50' cable to the Remote 7, and 6' MIDI cables from the Remote 7 to your gear. YMMV.

The 2 TRS jacks on the Remote 7 are hard wired to 2 of the 5 pin DINs. When using the shared DIN and TRS output at the same time, the voltage will be lowered, kind of like using a headphone splitter. A maximum 6 foot TRS cable length is advised, though the MIDI.ORG does not specify a TRS to TRS cable, only a TRS to MIDI adapter with a maximum 6" length. There have been no noticeable problems using short (36") dollar store TRS cables.

Like MRCC outputs 7-12, Remote 7 outputs do not currently pass SysEx data.

Additional information
Weight: 0.192 kg
Dimensions: 14 × 9 × 4 cm

Notes: Erica Synths MIDI thru box is professional quality, no latency, one MIDI In to 8 MIDI Through splitter in rigid aluminium case. It allows to connect up to 8 instruments to your sequencer or master keyboard and control them simultaneously without undesired delays and interference.

Notes: The KMI MIDI Expander enables you to use KMI gear such as SoftStep, 12 Step and QuNeo to control your MIDI hardware devices with 5-pin MIDI DIN connectors.

Plug in your MIDI devices to the KMI MIDI Expander and you're ready to send and receive MIDI data with or without a computer.

Notes: The Kenton Merge 4 can merge the data from up to 4 separate MIDI sources (e.g. Master keyboards or controllers) into a single MIDI data stream which appears at both of the MIDI out sockets. It features 4 opto-isolated MIDI inputs and 2 MIDI outputs.

The Kenton Merge 4 is powered from a mains adaptor (wall wart) so you can fit and forget.

Comes with multi-region power supply

Notes: Merges the data from up to eight separate MIDI sources (e.g. master keyboards, controllers, computers etc.) into a single MIDI data stream which appears at both the MIDI out sockets. Merges all MIDI data including MIDI Clock, MIDI time code and SysEx (see the manual for merging rules). Can also be configured as two completely independent 4 into 1 mergers with the simple press of a recessed button (see manual for details).

- 8 opto-isolated MIDI Ins
- 2 MIDI Outs

Comes with mult-regional power supply

Notes: Your USB device is plugged into the MIDI USB Host mk3 instead of into a computer. It provides MIDI In & Out sockets for USB MIDI keyboards and controllers which have only a USB B type socket. For example, used with a USB-Solo, it allows the USB-Solo to be used in a standard MIDI setup, just like a Pro-Solo. It has a USB Host port (USB A type socket), a MIDI In and a MIDI Out (both 5 pin DIN).

The MIDI USB Host mk3 now has additional features. In addition to the standard operating mode, there are now two further modes.

Standard mode (LED Green):
MIDI data received at the MIDI In socket is sent to the USB device and MID data from the USB device is sent to the MIDI Out socket.

Merge 1 mode (LED Amber):
MIDI IN does not go to USB device but instead is merged with MIDI data coming from the USB device which is then sent to the MIDI Out socket.

Merge 2 mode (LED Red):
MIDI IN data is sent to the USB device & is also merged with MIDI data from the USB device which is then sent to the MIDI Out socket.

The modes are selected sequentially by pressing the recessed push button - the LED colour indicating which mode is current.

The attached USB MIDI device MUST be 'Class Compliant'.

The MIDI USB HOST is powered by a regulated 5V mains adaptor (supplied), and can supply up to 1 Amp of buss power to the attached USB device. This product is supplied with a multi-region power supply suitable for use in most countries.

Attractively finished in brushed aluminium with black screen print

Dimensions: 110mm x 55mm x 32mm

Connecting
You can connect one "Class Compliant" USB device directly into the MIDI USB Host. If your host has the latest firmware already installed then you can plug in a powered USB hub and up to four USB devices can then be connected. Earlier MIDI USB Host mkIIs can be updated with a free download which is available from the support section of our website. Serial numbers N6-2421 already have the hub compatible firmware. Serial numbers N3-0541and upward can be updated.

It is recommended that you attach your USB device to the MIDI USB Host before applying power. Then plug-in and power the power adaptor. The active LED should be lit up. If you apply power with nothing plugged into the MIDI USB Host, the Active LED will flash steadily; this is to indicate that it is waiting for a suitable device to be attached. If it is still flashing when you have attached your device, then it is possible that your device is not class compliant, however you could try turning off the power and start again.

Some USB MIDI devices have two modes of operation and can be set to operate in Class Compliant mode even if this is not the default. The Class Compliant mode might be called "generic driver", the other mode may be called something like "advanced driver". Consult the device manual to see if the mode can be set for Class Compliant.

If you unplug then re-plug the USB cable while it is powered the device might reconnect, but it is not certain.

Power

It is essential to use only the supplied 5V regulated power adaptor. Applying a voltage higher than 5V to the MIDI USB Host will probably not damage the MIDI USB Host itself, but it could damage any attached USB device as the 5V is passed on to the attached USB device for buss power. There is protection circuitry inside the MIDI USB Host to protect against reverse polarity and over-voltage, but these should be treated as a last resort and are not guaranteed to prevent damage to an attached USB device in the event of over-voltage as the USB buss voltage could rise to 6.5V before being clamped.

Care should be taken to ensure that power adaptors for other pieces of equipment are not accidentally plugged into the MIDI USB Host.

If the input voltage rises above 6.5 volts then power will be shut off. The LED will go out and the unit will not operate again until power has been removed for at least 60 seconds. This allows time for the thermal fuse to reset.

The following Yamaha keyboards ar known to be class compliant and therefore should work OK:

PSR-E353, PSR-E443
PSR-S670, PSR-S770, PSR-S970, PSR-A3000, TYROS-5
NP-12, NP-32
DGX-650, DGX-660
P-105, P-115, P-255

The following keyboards are known to incorporate a USB hub and therefore will only work with firmware v2005 or later (s/n N6-2421 and above) for the MIDI USB Host:

Korg Microkey 61
Korg Microkey 49
Korg Microkey 37

Power: 90mA, USB mini-B socket - leaving 910 mA available for the attached USB device
Dimensions: 110 x 55 x 32 mm
Weight: 100g (excluding power supply)
MIDI: 1x IN, 1x OUT - both 5 pin DIN
Power Supply: 5V DC / 1 Amp regulated - (never use an unregulated supply as unregulated supplies typically give a higher output voltage than shown).

This product is supplied with a multi-region power supply which is suitable for use in the UK, EU, US/Canada and AUS/NZ.

Notes: - CV & Gate inputs on 3.5mm mono jack sockets
- A to D conversion for main CV input is 16 bit high quality ADC
- V/octave, Hz/V or 1.2V/oct modes selectable
- Gate type can be selected as Gate or S-trig
- Aux1 & 2 inputs on 3.5mm mono jack (continuously variable or switch selectable)
- Auxes can select controller number
- Auto tune feature makes setup easy
- MIDI Out on 5 pin DIN socket
- Non-volatile memory EEPROM (no back-up battery required)
- 32 bit ARM processor

Comes with multi-regional power supply

Notes: Receives MIDI data from a single MIDI OUT (e.g. sequencer or master keyboard) and produces identical copies at the 12 MIDI THRU sockets. These can then be connected to the MIDI IN of sound modules or other devices which require MIDI signals sent to them.

High quality Kenton MIDI Thru box with opto-isolated MIDI In and separate drive for each MIDI Out. Powered from a mains adapter so you can fit and forget.

Notes: The Kenton Thru-5 is a high quality MIDI Thru box with opto-isolated MIDI In and separate drive for each MIDI Out. It is powered from a mains adaptor (wall wart) so you can fit and forget.

Comes with multi-region power supply

Notes: The MIDI Solutions Footswitch Controller provides a 1/4" phone jack input for connection to a footswitch or contact closure which can be used to trigger MIDI events (for eight footswitch inputs in a single rack space unit, see the MIDI Solutions F8). Triggered MIDI events are merged with incoming MIDI messages and sent to the MIDI output of the Footswitch Controller.

Triggered event types are programmable and include: Note, Control Change, Pitch Bend, Program Change, Start/Stop, System Exclusive

Other functions include: Program Change INC/DEC, Rechannelize, Transpose, Tap Tempo, Note-on Filter

MIDI Echo and Footswitch Toggle parameters are selectable on/off.

The Polarity of the footswitch can be determined automatically on power-up, or programmed to normally-open or normally-closed.

The Footswitch Controller is programmed by sending it MIDI System Exclusive messages (see FAQs - Programming). This can be done easily with the Processors Programming Tools software. Once programmed, its settings are retained even after power is removed. The Footswitch Controller can be reprogrammed with new settings as often as needed.

The Footswitch Controller is MIDI-powered, and requires no batteries or power supply to operate with most MIDI products (see FAQs - Power and FAQs - LED for more information). A MIDI indicator LED lights up when the product is powered and flashes when MIDI data passes through it.

Notes: The MIDI Solutions Quadra Thru is a 1 in 4 out MIDI Thru Box. All MIDI messages appearing at the input are sent to all four Thru outputs. Active circuitry cleans up any skewing of MIDI data bits that has occurred at the input, ensuring reliable operation in setups that require daisy chaining or long cable runs.

The Quadra Thru is MIDI powered, and requires no batteries or power supply to operate with most MIDI products (see FAQs - Power and FAQs - LED for more information). A MIDI indicator LED lights up when the product is powered and flashes when MIDI data passes through it.

Notes: Realizing matching gaps in the market and their friends' workflows, Old Blood Noise Endeavors unveils their newest utility device, the MIDI to Expression Translator (MTET). MTET is a simple device for complex workflows.

It receives MIDI CC messages and turns them into expression outputs, allowing players to unlock MIDI control over their expression-enabled devices.

Where once there was only a foot, now there is envelope control, LFO control, snapping to preset positions: any MIDI shape can express an OBNE (or similar) device.

Language is hard: let's start at the start. Communication is complex, beautiful a real thorn in our sides. Many languages, dialects, standards. Some similar, some vastly different. A linear sweep, a barrage of Bits.

Music, of course, is meant to be the universal language, but Old Blood Noise Endeavors' devices don't see it that way.

The MIDI To Expression Translator (MTET) does exactly what it says on the tin. It receives MIDI messages from external MIDI devices and uses those MIDI messages to create four separate Expression outputs for use with external expression enabled devices.

MTET uses a 50k digital pot, wired for TRS connection with the tip active (connected to the wiper). It is assumed the external expression-enabled unit will apply to the sleeve and reference voltage to the ring. It is configured to communicate with other devices using this standard. Its primary purpose is to interface with Old Blood Noise Endeavors pedals and serve as a communicator between them and a MIDI controller. However, it will work with many other units that use the same expression setup as OBNE.

Notes: Another typically creative offering from the good people at Soma, the Metaconformer is a MIDI router and thru box with some nice touches, including Combiner mode to join monophonic instruments into one big polyphonic patch.

Supplier's Notes:
METACONFORMER is a smart MIDI router and thru box.

The METACONFORMER has 2 independent MIDI inputs and 4 MIDI outputs. One of the outputs can be configured as a sync signal source.

Today METACONFORMER supports 3 modes of processing MIDI messages:

Splitter mode allows you to split the keyboard of one MIDI channel into several zones. Notes from each zone are sent to only one instrument. This allows you to simultaneously play several instruments at once, listen to the interaction of timbres without having to switch the MIDI channel.

Combiner mode allows you to combine several monophonic instruments into one multitimbral polyphonic instrument. This works the same way as a polyphonic synthesizer's algorithm when it activates its voices. Only instead of voices with the same dynamics and parameters, you can play completely different timbres, which greatly expands the possibilities for creating interesting harmonies and rhythms.

Translator mode allows you to play the sound core parameter by pressing notes. Each received note is translated into a CC message corresponding to the desired parameter. This mode allows you to play with sound parameters, rather than simply enter them by rotating the knob. This mode works great with granular delays, resonant filters and paraphonic oscillators.

Power supply: DC +5V via USB
Current consumption: 20 ma max
Dimensions: 148 x 50 x 20 mm
Weight: 0.15 kg

Notes: Continuing from the appeal of the G2M and B2M, the i2M Musicport combines the features of both these units (to support both guitar and bass) with an optimised USB interface for even faster MIDI performance. Featuring extended MIDI features and configurability to satisfy the most demanding users, and a high-impedance audio interface that won't suck the tone from your instrument, the i2M Musicport is the new way to connect your musical instruments to your computer.

Designed particularly for guitar and bass, it works with most musical instruments including wind instruments and the human voice. Now you can record great-sounding tracks and play synthesizers and samplers how you have always wanted to: by using your favourite instrument.

Plug and Play

Using class-compliant USB drivers built into your computer's operating system, and with no special instrument set up required, the i2M Musicport offers a true plug-and-play experience for all musicians.

Ultra-Fast Monophonic MIDI Conversion

Although latency is unavoidable when converting musical pitch into MIDI mes-sages, the unique technology used in the i2M Musicport reduces this to a minimum. Not only is the MIDI conversion extremely fast, but accurate and ro-bust. In fact, the pitch-bend detection of the i2M Musicport is more accurate than many popular guitar tuners!

Fine nuances of your playing are captured by the i2M Musicport: note velocity is determined from how hard you play; and subtle vibrato and bends are con-verted to ultra-accurate pitch-bend messages with virtually no latency. Every-thing from the emotional subtlety of a 'cello solo to the most extreme use of a guitar's whammy bar are tracked flawlessly.

The optimised USB MIDI interface further minimises latency by intelligently managing data packets and avoiding the inherent delays in the traditional MIDI hardware protocol.

Flexible MIDI Architecture

The MIDI converter architecture is very flexible and powerful comprising six zones (splits), each with configurable pitch bend, MIDI channel, transpose and other parameters.

Hi-Z USB Audio Interface

The i2M Musicport features a very high-impedance (Hi-Z) audio input circuit. This means it won't degrade the tone of your musical instruments, unlike typi-cal "line" inputs - often a problem with electric guitars and dynamic micro-phones. The input pre-amp also has adjustable gain to accommodate a wide variety of musical instruments.
High quality 16-bit, 44.1 kHz (CD quality), and 48 kHz (DVD quality) digital audio can be recorded into your favourite audio application, or used live, for example through amp-simulators with great-sounding results.

An ASIO driver (only supported on Windows operating systems) is available to provide low latency audio and features the unique ability to use any other au-dio device (even other ASIO devices) as the output audio device so you can hear everything you do in real time.

Future-Proof (Upgradeable Firmware)

To support new features and to make it futureproof, the firmware (internal software) of the i2M Musicport can be upgraded. This means you can invest with confidence in the i2M Musicport.

Pocket-Sized / Gigantic Possibilities

Fashioned as an in-line 1/4" jack-to-USB adapter, and about the size of a car key-fob, the i2M Musicport has an ultra-compact design that can easily fit into your pocket. But this tiny box will redefine your musical possibilities.

An invaluable composition tool, the i2M Musicport will let you access new sounds with ease, enable you to create tab and scores, provide you with new inspiration and let you have more fun than you thought possible.

Desktop Editor Software

The i2M Musicport features a very flexible and powerful MIDI converter archi-tecture with 6 zones enabling MIDI to be sent on up to 6 MIDI channels simul-taneously, with each zone being independently configurable. You can custom-ise each of the operating modes for your particular requirements and ex-change these settings with other i2M Musicport users.

Four presets can be stored on the i2M Musicport so you can switch between these without requiring the Desktop Editor Software. This software is available for Microsoft Windows, and OSX (10.5 and above).

Note: the i2M Musicport doesn't include its own MIDI sounds, you must use suitable software (sampler, synthesizer, sound module etc) or your computer to record or to hear the MIDI output.

Specs:

Power supply: USB bus powered
Size: 75mm x 28mm x 28mm
Weight: 40 g
Input (Instrument): 6.35mm (1/4") mono jack | 10 MOhm impedance
Switches:MODE button to select active preset
Computer: Standard Type B USB socket
Drivers: Class-compliant (built into operation system)
Preamp Gain: -12dB (cut) to +15dB (boost) in 3dB steps
Audio: 16-bit, 44.1kHz (CD Quality) | 16-bit, 48kHz (DVD Quality)

Box Contents:

i2M musicport
Printed Operators' Manual (in English)
1m USB cable

Notes: 2 x silicone isolation pads shaped to fit UNIT-4, with a 6° incline or decline. Tuned to improve stereo accuracy and clarity. Made from 100% recycled silicone.

Notes: With this stand it is easy to position the speaker vertically on a table with better aiming to the listening position. The stand improves the acoustical performance by raising the monitors above the table level, causing less reflections from the table surface. The sturdy stand has a 0-20-degree upward tilt angle adjustment upwards. Available in black and white powder coat finish.

Width
110 mm
Height
199 mm

Notes: ***B-STOCK: Box opened, product in perfect working order***


With this stand it is easy to position the speaker vertically on a table with better aiming to the listening position. The stand improves the acoustical performance by raising the monitors above the table level, causing less reflections from the table surface. The sturdy stand has a 0-20-degree upward tilt angle adjustment upwards. Available in black and white powder coat finish.

Width
110 mm
Height
199 mm

Notes: The floor stand comes with a cast iron base with an anti-vibration rubber ring. The height of the stand is adjustable from 870 to 1565 mm. It weighs 5.4 kg and its base diameter is 250 mm. Available in black color. Packed in a single cardboard box.

Stand plates which are designed to fit the Iso-Pod stand are recommended to use with this product. Please note, that we don't recommend using this product with the 8331 monitor.

Length min.
870 mm
Length max.
1565 mm
Width
250 mm

Notes: Short table stand providing a raised position for loudspeakers. Heavy black cast iron base with anti-vibration rubber ring, diameter 17 mm. Mounting 3/8" thread on the tube top. Preferably used together with stand plates for better positioning. Suitable for 8010, 8020, 8030 and corresponding G and 4000 Series models (G One, G Two, G Three, 4010, 4020 and 4030). These models have an integrated 3/8" thread for possible direct fixing without stand plate. 8040, G Four and 4040 require also a 8040-408 Stand plate, because they have an unsuitable M10 thread. As the 4040 is shipped without an Iso-Pod, also an Iso-Pod kit 8040-440 is needed.

Not to be used with 8331.

Width: 180 mm
Height: 170 mm

Notes: 8000 series Genelec stand plates are designed for use together with the Iso-Pod that comes with all 8000 series monitors. The Iso-Pod allows you to tilt the monitor for optimal alignment. Simply mount the stand plate onto the 3/8" thread on the tube and ensure tight screw connection. Place the Iso-Pod over the four pins of the stand plate. The stand plate is available in black and white.

Width
93 mm

Notes: 8000 series Genelec stand plates are designed for use together with the Iso-Pod that comes with all 8000 series monitors. The Iso-Pod allows you to tilt the monitor for optimal alignment. Simply mount the stand plate onto the 3/8" thread on the tube and ensure tight screw connection. Place the Iso-Pod over the four pins of the stand plate. Available in black.

Width: 114 mm

Notes: We're familiar with IsoAcoustics' highly effective line of monitor isolation stands that seem to bring out the best from any speaker. NAMM 2017 will see IsoAcoustics release the new Iso-Puck - the same concept as the bigger stands, yet in a low-profile, flexible, scalable version. The little puck-like discs are placed under your speaker to isolate them from the surface they're sitting on.

An Iso-Puck is pretty small - just 3cm tall and 6cm in diameter. Its round shape makes positioning a bit easier than with stands, especially on varied surfaces like the narrow space on top of a console meter bridge. The multipart isolation construction of the Iso-Puck lets it move to isolate and manage the energy in line with the same isolation concepts employed in other IsoAcoustics products. The Pucks feature a flange suction cup on the top to hold tight the speaker surface, as well as a bottom suction cup flange for the supporting surface. Energy is transferred to the core of the multipart isolator in between which resists lateral movement and offers better isolation.

Notes: The ISO-PUCK mini is the new little brother of the popular ISO-PUCK, offering the same benefits but designed for lighter speakers and monitors. The IsoAcoustics ISO-PUCK mini provide an innovative new approach in isolating studio monitors, speakers and other systems. This unique design provides a high degree of isolation while resisting lateral movement and oscillations, which results in greater sound clarity and focus. This versatile isolation tool is possibly the most cost effective upgrade available for improving the performance and clarity of your speakers or monitors.

Notes: IsoAcoustics introduce the next evolution of their specialized line of speaker stands for the audio professional, music hobbyist, audiophile, and music lover. The new ISO Series of speaker stands provide superior acoustic isolation and enhance the sound clarity of any speakers including studio monitors, home theatre systems and sound reinforcement.

With a lower profile and new contemporary design, the ISO Series of stands positions your studio closer to the supporting surface or meter bridge, and the new redesigned isolators moves the acoustic performance another step forward.

IsoAcoustics ISO Series speaker stands are built with a unique, patented isolation technology that provides a high degree of isolations and manages the speaker's energy to deliver authentic, uncoloured sound. This next generation of speaker stands effectively eliminates energy transfer into the supporting surfaces. Bass becomes tighter, overall imaging is enhanced and your speakers are enabled to perform to their full potential. Following the same design philosophy as the ISO-L8R Series, these isolation stands provide 14 variations of height and tilt adjustment to optimize the placement and performance of studio monitors by getting the tweeters in the correct alignment with the listening position.

Whether you're a pro mixing in the studio - a musician creating in a home project environment - or an audiophile who appreciates every nuance of music and sound - you'll hear and appreciate the difference with the ISO Series speaker stands. It's simply the best investment you can make for superior audio.

ISO-130:

Designed for smaller speakers and studio monitors. These stands provide 14 variations of height and tilt to optimize speaker placement and performance. Isolate your studio monitors from the supporting surface and allow them to breathe so they can deliver the clearest and most accurate sound possible.

5.1"x6"/13x15cm Short: 2.7"/8cm Tall: 8"/20.3cm 20 lbs/9kg

Notes: IsoAcoustics introduce the next evolution of their specialized line of speaker stands for the audio professional, music hobbyist, audiophile, and music lover. The new ISO Series of speaker stands provide superior acoustic isolation and enhance the sound clarity of any speakers including studio monitors, home theatre systems and sound reinforcement.

With a lower profile and new contemporary design, the ISO Series of stands positions your studio closer to the supporting surface or meter bridge, and the new redesigned isolators moves the acoustic performance another step forward.

IsoAcoustics ISO Series speaker stands are built with a unique, patented isolation technology that provides a high degree of isolations and manages the speaker's energy to deliver authentic, uncoloured sound. This next generation of speaker stands effectively eliminates energy transfer into the supporting surfaces. Bass becomes tighter, overall imaging is enhanced and your speakers are enabled to perform to their full potential. Following the same design philosophy as the ISO-L8R Series, these isolation stands provide 14 variations of height and tilt adjustment to optimize the placement and performance of studio monitors by getting the tweeters in the correct alignment with the listening position.

Whether you're a pro mixing in the studio - a musician creating in a home project environment - or an audiophile who appreciates every nuance of music and sound - you'll hear and appreciate the difference with the ISO Series speaker stands. It's simply the best investment you can make for superior audio.

ISO-155:

Designed for medium size speakers and studio monitors. These stands provide 14 variations of height and tilt to optimize speaker placement and performance. Isolate your studio monitors from the supporting surface and allow them to breathe so they can deliver the clearest and most accurate sound possible.

6.1"x7.5"/15.5x19cm Short: 2.9"/9.5cm Tall: 8.75"/22.5cm 40 lbs/18kg

Notes: Acoustic isolation pads decouple monitor speakers and eliminate vibrations/resonance, and in some instances eliminates resonant coupling from the surface to which the speakers are situated. Using the angled isolation pads gives greater detail and depth across the frequency spectrum, allowing for easier and cleaner mixing.

The high density foam allows the speaker to be separated from the surface while the non-slip surface ensures the speaker stays in place. The kit contains 2 components for different configurations (horizontal/angled).

Product Dimensions (mm): 310x310

Notes: Acoustic isolation pads decouple monitor speakers and eliminate vibrations/resonance, and in some instances eliminates resonant coupling from the surface to which the speakers are situated.

Using the angled isolation pads gives greater detail and depth across the frequency spectrum, allowing for easier and cleaner mixing. The high density foam allows the speaker to be separated from the surface while the non-slip surface ensures the speaker stays in place. The kit contains 2 components for different configurations (horizontal/angled).

Product Dimensions (mm): 263mm x 380mm

Notes: Acoustic isolation pads decouple monitor speakers and eliminate vibrations/resonance, and in some instances eliminates resonant coupling from the surface to which the speakers are situated. Using the angled isolation pads gives greater detail and depth across the frequency spectrum, allowing for easier and cleaner mixing.

The high density foam allows the speaker to be separated from the surface while the non-slip surface ensures the speaker stays in place. The kit contains 2 components for different configurations (horizontal/angled).

Product Dimensions (mm): 190x240

Notes: Acoustic isolation pads decouple monitor speakers and eliminate vibrations/resonance, and in some instances eliminates resonant coupling from the surface to which the speakers are situated. Using the angled isolation pads gives greater detail and depth across the frequency spectrum, allowing for easier and cleaner mixing.

The high density foam allows the speaker to be separated from the surface while the non-slip surface ensures the speaker stays in place. The kit contains 2 components for different configurations (horizontal/angled).

Product Dimensions (mm): 330x330