安全购物

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

安全购物

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

This Week: Studio Equipment

首页  This Week  

Studio Equipment

Options
Items 1 to 13 of 13 on page 1 of 1
Cat: 777388 Rel: 22 Jun 20 • View all Synthesisers
 
home-build analogue synthesiser
Notes: POM-400 is a home-build analogue synthesizer with 3 oscillators, noise, random generator, 2 envelopes, 2 VCA's, LFO, filter, mixer, speakerbox, power pack and a 1-16 step sequencer. A Complete kit with powder-coated chassis, 16 modules, 15 patch cables, screwdriver, and an illustrated build guide.

Each kit comes with all of the parts needed to build the project. Included in these flat packed synthesizers are everything from a powder coated aluminium chassis to an illustrated build guide with instructions and bend angles. When bending is complete, move on to mount the modules, snap the wire connectors and finalise your build with knobs and rubber feet. Remember, think twice and double-check the angles before bending.

Note: There is no power supply included. If you want to run the units on wall power you need an adapter with the following specifications (sold separately):
AC/DC adapter
12V, min 1A (12 watt)
Polarity: center negative
Plug: 4.75/1.7mm

Warning: Make sure to remove the batteries from the battery holder before connecting the DC-plug to the external AC/DC adapter.

Use separate battery charger to charge re-chargeable batteries.

SPECIFICATIONS
1 x POM-400 chassis
14 x Modules - M-1, M-2, M-3, M-4, 2x M-5, 2x M-6, M-7, M-8, M-9, M-10, M-11, M-12
1 x Battery Pack
1 x Distro
37 x Trim Knob
13 x Value Knob
15 x Audio Cable
14 x Chassis Screw
4 x Rubber Foot
1 x Screwdriver
1 x User's Manual

Added PO-Sync output, which allows for easy patching out and into the PO series. Use this jack to sync modular tempo with any pocket operator.
Speaker volume knob adjusted for intuitive control
Level on sequencer clock out adjusted to 5v from 10v
Output amplitude on white noise adjusted so now it can trigger envelopes
PSU has been improved, it is now more stable and offers a longer battery life
Oscillators have been retrimmed, giving an improved audio range to play with
Increased size of screw holes on powder coated aluminium chassis for easy building

MEET THE MODULES
M-1
square
square oscillator
Rich in odd harmonics, the square wave oscillator is great for hollow basses and screaming leads. The pulse width modulation (pwm) input makes it possible to generate
a faux two oscillator detune sound.

M-2
saw
sawtooth oscillator
Containing both the odd and even harmonics, the sawtooth is great for string types of sound. The linear frequency modulation input (fm) easily brings you into the sci-fi domain.

M-3
sine
sine oscillator
With no overtones the pure sine wave is a jack of all trades. From pure bass to dub sirens, it's the army knife of a modular system. The linear frequency modulation input (fm) easily brings you into the sci-fi domain.

M-4
filter
low pass filter
Shape your sound with the 24db/oct low pass filter. Get lost in space while tweaking the resonance and frequency pots.

M-5
env
envelope
A classic. Attack, decay, sustain and release. Give your sonic creation the contour it deserves. Triggered by any signal that crosses the two volt threshold.

M-6
vca
voltage control amplifier
Automate your volume! Feed it control voltage and your signal will adapt accordingly. Best friends with the envelope for classic configurations, and your oscillator in wired configurations

M-7
mixer
3-channel mixer
A necessity in all modular systems. Three inputs, one output, with volume control over both the individual inputs as well as the master output.

M-8
noise
2 x noise
The white noise contains noise equal over the whole spectrum. The saw output is a perfect companion for the sample and hold.

M-9
rand
Randomise your music with the sample and hold. Any input is sampled and then presented at the outputs. Rate can be controlled both externally and internally, but always needs an external signal to sample. Experiment with both receptive and random sources as the sample input.

M-10
lfo
low frequency oscillator
Generating both square as well as triangle waves, the low frequency oscillator is the perfect tool to spice up your patches. Great in everything from automated filter sweeps to syncing the clocks.

M-11
speaker
amplifier+speaker bellow
Cables goes in, sounds come out. Show off your amazing patch to the rest of the world. Let them hear it.
Warning: never connect headphones directly to the outputs! You can damage your ears and your headphones.

M-12
sequencer
16-step sequencer
Sixteen steps of control. Override the internal clock with the clock input. Send clock out or PO Sync out. Make it go backwards with the arrow input. Jump to the first step, the second, fourth or eight step with the reset and binary.
Read more
MRP:$622.80 SAVE 17%
 2 in stock $517.95
Click for better price!
or call +44 20 7424 1960
quote 777388
Cat: 780219 Rel: 22 Jun 20 • View all Studio monitors
 
studio monitor
Notes: The distillation of Dynaudio's extensive speaker knowledge in a compact two-way nearfield design. Bass response as low as 45Hz thanks to DSP bass extension.

Supplier notes:
This monitor uses sophisticated DSP to extend or its curtail low-frequency response by 10Hz, while Position and Sound Balance controls let you fine-tune for total neutrality in your environment. Its larger 7in woofer helps extend bass, while the low-mass aluminium voice-coil, vented ferrite magnet and MSP driver take care of precision.



Read more
MRP:$535.43 SAVE 15%
 2 in stock $452.44
Click for better price!
or call +44 20 7424 1960
quote 780219
Cat: 777383 Rel: 22 Jun 20 • View all Synthesisers
 
analogue monophonic synthesiser
Notes: The mid-sized option in Teenage Engineering's innovative POM range, the 170 is designed as an introduction to modular synthesis. A simple DIY build in IKEA-style flat-pack format.

Supplier notes:
POM-170 is a home-build analogue monophonic synthesizer with built-in programmable sequencer. A complete kit with powder coated chassis, keyboard, oscillator, filter, envelope, LFO, VCA, speakerbox, power distro, powerpack, a screwdriver, 8 patch cables, and an illustrated build guide.

Each kit comes with all of the parts needed to build the project. Included in these flat packed synthesizers are everything from a powder coated aluminium chassis to an illustrated build guide with instructions and bend angles. When bending is complete, move on to mount the modules, snap the wire connectors and finalise your build with knobs and rubber feet. Remember, think twice and double-check the angles before bending.

Warning: Make sure to remove the batteries from the battery holder before connecting the DC-plug to the external AC/DC adapter.

Use separate battery charger to charge re-chargeable batteries.

Note: There is no power supply included. If you want to run the units on wall power you need an adapter with the following specifications (sold separately):
AC/DC adapter
12V, min 1A (12 watt)
Polarity: center negative
Plug: 4.75/1.7mm

SPECIFICATIONS
1 x POM-170 Chassis
7 x Modules - M-1, M-4, M-5, M-6, M-10, M-11, M-16
1 x Battery Pack
1 x Distro
23 x Trim Knob
9 x Value Knob
8 x Audio Cable
6 x Rubber Foot
6 x Chassis Screw
1 x Screwdriver
1 x User's Manual

PSU improved to be more stable and offer longer battery life
Oscillators retrimmed to improve audio range
Speaker volume knob adjusted for intuitive control
Labelling for the output jacks on the keyboard changed to "CV 1, 2, 3" the 3 "program gate" jacks changed to "Gate 1, 2, 3" and the 3 "keyboard" jacks changed to "Keyboard CV"
Increased size of screw holes on powder coated aluminIum chassis for easy building
Standoffs come pre-threaded for quicker assembly

MEET THE MODULES
M-1
square
square oscillator
Rich in odd harmonics, the square wave oscillator is great for hollow basses and screaming leads. The pulse width modulation (pwm) input makes it possible to generate
a faux two oscillator detune sound.

M-4
filter
low pass filter
Shape your sound with the 24db/oct low pass filter. Get lost in space while tweaking the resonance and frequency pots.

M-5
env
envelope
A classic. Attack, decay, sustain and release. Give your sonic creation the contour it deserves. Triggered by any signal that crosses the two volt threshold.

M-6
vca
voltage control amplifier
Automate your volume! Feed it control voltage and your signal will adapt accordingly. Best friends with the envelope for classic configurations, and your oscillator in wired configurations

M-10
lfo
low frequency oscillator
Generating both square as well as triangle waves, the low frequency oscillator is the perfect tool to spice up your patches. Great in everything from automated filter sweeps to syncing the clocks.

M-11
speaker
amplifier+speaker bellow
Cables goes in, sounds come out. Show off your amazing patch to the rest of the world. Let them hear it.
Warning: never connect headphones directly to the outputs! You can damage your ears and your headphones.

M-16
keyboard
keyboard+sequencer
Keyboard with individual tuneable keys and a programmable step sequencer.
Read more
MRP:$497.99 SAVE 27%
 3 in stock $362.98
Cat: 780211 Rel: 22 Jun 20 • View all Studio monitors
 
studio monitor
Notes: LYD 5, with its low-volume precision, is the ideal complement for any small studio set-up. It uses the same lightweight aluminium voice-coils in its handmade 5in MSP drive-units as our high-end hi-fi speakers, and pairs them with cutting-edge Class-D amplification as well as a 24-bit/96kHz signal path with advanced DSP.
Read more
MRP:$455.56 SAVE 33%
 2 in stock $305.27
Cat: 780437 Rel: 23 Jun 20 • View all Synth accessories
 
Series module
Notes: Erica Synths Black Pre-fade Listen Expander is a satellite module for Erica Synths Black Stereo Mixer.

Since modular performances are often about uncertainty, unpredictability and sudden filter resonance screams that can kill loudspeakers, it's good to know what is it that you are about to fade into your modular mix and this is where the Black PFL Expander comes in! You can monitor each of four Black Stereo Mixer inputs or any combination of them before mixer level knob takes effect.

NB: Black PFL Expander is designed to work with both Erica Synths Black Stereo Mixer V2 and V3. The module doesn't have a PSU connector therefore it can not be used on it's own.

Technical specifications:

Power consumption:+15mA, -7mA
Module width: 12HP
Module depth: 25mm
Read more
MRP:$107.34 SAVE 53%
 1 in stock $50.96
Click for better price!
or call +44 20 7424 1960
quote 780437
Cat: 775085 Rel: 22 Jun 20 • View all Synth modules
 
sampling module
Notes: Bitbox mk2 delivers powerful sampling and mangling for Eurorack. With this module you can add recording, sample playback, clip launching, slicing, granular sounds and musically intelligent looping capabilities to your Eurorack rig. With a 3.5 inch touchscreen, bitbox mk2 makes easy work of selecting, editing, and tweaking your samples. You can stream large samples of up to 4 GB file size straight from the microSD card. Interact with other musical components via CV and MIDI. Tweak your configurations to get them just right, then save them to multiple presets for future reuse. With the new bitbox mk2 hardware, you can now do more with the new more powerful processor.

Sample Playback
Play up to 24 polyphonic notes when your samples fit in the 64 MB of internal memory or up to 8 larger samples streaming directly from the microSD card
Configure 16 sample pads per preset as single or multi-samples, clips, slicers, granular or new recordings
Stream long samples from the microSD card with a max sample size of 4 GB, which can be many hours of audio
Trigger samples with the touch screen, CV gate inputs, or MIDI input
Use MIDI for polyphonic playback of samples or slices
Control how samples start and stop by choosing from one-shot, toggle, and gate launch modes
Tweak playback through a variety of sample parameters, including start position, length, pitch, gain, filter, loop mode, launch quantization, ADSR, Exclusive Grouping, clip synchronization, slice placement and sequencing, grain size, grain spread, grain count, and MIDI note and channel mapping

Record Eurorack level audio straight into the module:

Record samples from a stereo audio input pair
Configure each pad for stereo or mono recording with the option to synchronize the start and stop times to clock inputs
Trigger recording via audio level threshold
Create perfectly sized loops by setting the recording length
Enable immediate playback after recording for live looping capabilities
Make recordings up to 4 hours in length
Store recorded samples as WAV files on the micro SD card then remove the card to transfer them to your computer
Sample Modes
Find creative ways of using your samples with our 5 sample playback modes:

Trigger one shots or launch loops using sample mode
Load a folder of samples into a sample mode pad to improve the quality of the pitch shifting when playing a sample chromatically or to trigger different samples with each note
Play time-synchronized loops with constant pitch time shifting in clip mode
Skip between slices of a WAV using slicer mode
Create rich textures and other worldly sounds with granular mode
Inputs and Outputs
Connect up to 8 CV modulators to control numerous sample parameters
Trigger each of the 16 pads with a dedicated gate input
Record through the dedicated stereo audio input pair
Use CV to keep time through the dedicated clock input
Confidently connect with both TRS MIDI Type A and Type B, no adapter needed
Route the audio from each pad out to one of 2 stereo audio output pairs or any of the corresponding single channels
Inputs and outputs are DC coupled so you can record and play out CV signals

External Control and Synchronization
Playback can be immediate or synchronized to internal clock, TRS clock in, or MIDI clock in and out
Trigger each pad independently through a dedicated gate input
Use MIDI to trigger pads via a note per pad
Play a single or multi-sample pad pitch shifted using MIDI notes or CV
Trigger different sample slices using MIDI notes or CV
Modulate a wide variety of sample parameters through the MIDI input and up to 8 CV signals
Quickly set up MIDI modulation using Learn mode- no need to look up CC numbers
Module Features
Use the 3.5? diagonal touch screen to intuitively explore the features of the module
Get more creative with double the processing power of the original bitbox
Fill out your sound with reverb and delay
Import or export WAV files with your Mac or PC using a microSD card
Save and recall multiple presets
Increase your capacity with larger microSD cards
Select Flipped UI mode to mount the unit with the screen on the bottom and use the screen, knobs, buttons, and CV jacks as you normally would
Read more
MRP:$772.57
 More than 10 in stock $710.67
Click for better price!
or call +44 20 7424 1960
quote 775085
Cat: 775080 Rel: 22 Jun 20 • View all Synth modules
 
sampling module
Notes: Bitbox micro provides Eurorack sampling for smaller racks and smaller budgets. In only 18 HP of rack space you can get a touch screen based sampler with support for 8 stereo sample pads. Now you can record samples directly into the module or load them from the microSD card. Trigger your samples via CV or MIDI, then apply effects and mix the outputs. Save your configurations to multiple presets for later reuse.

Sample Playback

Play up to 24 stereo polyphonic notes when your samples fit in the 64 MB of internal memory or up to 8 larger stereo samples streaming directly from the microSD card
Configure 8 stereo sample pads per preset as single or multi-samples, clips, slicers, granular or new recordings
Stream long samples from the microSD card with a max sample size of 4 GB, which can be many hours of audio
Trigger samples with the touch screen, CV gate inputs, or MIDI input
Control how samples start and stop by choosing from one-shot, toggle, and gate launch modes
Tweak playback through a variety of sample parameters, including start position, length, pitch, gain, filter, loop mode, launch quantization, ADSR, Exclusive Grouping, clip synchronization, slice placement and sequencing, grain size, grain spread, grain count, and MIDI note and channel mapping

Sample Recording

Record Eurorack level audio straight into the module:

Record samples from a stereo audio input pair
Configure each pad for stereo or mono recording with the option to synchronize the start and stop times to clock inputs
Trigger recording via audio level threshold
Create perfectly sized loops by setting the recording length
Enable immediate playback after recording for live looping capabilities
Make recordings up to 4 hours in length
Resample the master output without patching
Automate recording of a multi-sample bank via MIDI and CV
Store recorded samples as WAV files on the micro SD card then remove the card to transfer them to your computer

Sample Modes
Find creative ways of using your samples with our 5 sample playback modes:

Trigger one shots or launch loops using sample mode
Load a folder of samples into a sample mode pad to improve the quality of the pitch shifting when playing a sample chromatically or to trigger different samples with each note
Play time-synchronized loops with constant pitch time shifting in clip mode
Skip between slices of a WAV using slicer mode
Create rich textures and other worldly sounds with granular mode

Inputs and Outputs
Use the 8 inputs the way you want: assignments include a stereo audio input, up to 8 gate inputs, up to 8 CV inputs and 1 clock input.
Route the audio from each pad out to one of 3 stereo audio outputs or one of 6 mono audio outputs
Listen to all of the pad outputs combined on the master stereo output

External Control and Synchronization
Playback can be immediate or synchronized to internal clock, TRS clock in, or MIDI clock in and out
Confidently connect with both TRS MIDI Type A and Type B, no adapter needed
Play a single or multi-sample pad pitch shifted using MIDI notes or CV
Trigger different sample slices using MIDI notes or CV
Modulate a wide variety of sample parameters through the MIDI input and up to 8 CV signals
Quickly set up MIDI modulation using Learn mode - no need to look up CC numbers
Module Features
Use the 2? diagonal touch screen to intuitively explore the features of the module
Get more creative with double the processing power of the original bitbox
Refine your sound with reverb and delay
Import or export WAV files with your Mac or PC using a microSD card
Save and recall multiple presets
Increase your capacity with larger microSD cards
Inputs and outputs are DC coupled so you can record and play out CV signals
Read more
MRP:$517.96
 More than 10 in stock $474.93
Click for better price!
or call +44 20 7424 1960
quote 775080
Cat: 776867 Rel: 26 Jun 20 • View all Synth modules
 
oscillator module
Notes: The RS-95N oscillator is a premium, british sounding VCO with waveshaping possiblities. It has a new front panel design with elongated holes.

It is based on the RS-90 but has more features, predominantly a very special sine wave.

The RS-95N presented here is technically identical but instead a normal frequency control it features a gorgeous, lockable potentiometer with ten turns. This allows precise fine tune control and adds the look of an EMS synthesiser to the VCO.

The module has three audio outputs: pulse, triangle and sine.

The upper shape control affects the pulse width. The lower shape control not only morphs from a falling sawtooth over triangle to a rising saw (or ramp) but simultaneously alters the sine wave and produces a kind of smoothed, softer sawtooth. Additionally the saw/sine output is a CV-INPUT for the symmetry of the sine. Very extraordinary feature that all are voltage controllable.

The oscillator sync is "soft" and not only reacts to square waves but works with all waveforms.

The frequency control has three switchable modes:

STD (standard) with a range of two octaves.
2 is two octaves lower than STD.
WIDE mode gives a range from 0.3 Hz - 17kHz and thus allows use of the RS-95 as VC-LFO with waveshaping options!
The "vary" control not only attenuates but also can amplify the pitch CV. It controls linearly from 0V over 1V/oct to 0.4 V/oct.
Read more
MRP:$312.03 SAVE 17%
 1 in stock $260.02
Cat: 777032 Rel: 26 Jun 20 • View all Synth modules
 
filter module
Notes: Genuine EMS synthi filter, with redesigned faceplate!

This legendary filter can be switched between pre1974 and post 1974 filter type and response. For the first time response can be voltage controlled which was designed on the circuit board but not available on the matrix. This module is made under license from EMS. The only officially licensed remake of the EMS diode lowpass filter used in the VCS3 and AKS synths. It´s a faithful recreation of the original circuit, featuring some modifications that are also done on vintage EMS equipment, like a switchable faster CV response option for very quick modulations. Another switch determines if the filter has 18dB/oct slope as used by EMS pre-1974 or 24dB. The cutoff frequency and also the resonance are voltage controllable. Signal inputs and outputs have level controls.
Read more
MRP:$262.10 SAVE 16%
 1 in stock $219.45
Click for better price!
or call +44 20 7424 1960
quote 777032
Cat: 780436 Rel: 23 Jun 20 • View all Synth modules
 
Series module
Notes: Erica Synths Black Dual VCF is a dual multimode filter with CV control over cutoff and resonance for serious modular patches.

At the core of this VCF is a highly stable, custom multimode VCF chip AS3320 (produced in Riga, btw). This module can be used as two independent VCFs with simultaneous HP, BP and LP outputs, controls can be linked to stereo application and both VCFs can be chained in series or parallel to the summing output for ultimate modulations. Bonus feature - the 16 band spectrum analyser gives you visual feedback on what happens on summing output.

Technical specifications:

Audio output amplitude: 10 Vptp
CV input (full sweep): 10 Vptp
Panel width: 18HP
Module depth: 35mm
Power consumption: 40mA@+12V, 36mA@-12V

Read more
MRP:$468.04 SAVE 54%
 1 in stock $215.28
Click for better price!
or call +44 20 7424 1960
quote 780436
Cat: 781481 Rel: 26 Jun 20 • View all Synth modules
 
Voltage source module
Notes: The QSlider is an analog CV source with four 60 mm faders.

The control range of the four sliders can be set with two min/max controls.

The Min control sets the output voltage at zero position of the slider and the Max control sets the output voltage at the end position of the slider. The slider now controls between these two voltages. This allows you to limit the control range and still have the full control range of the slider available.

At a second output socket the inverted voltage is available (Min and Max are reversed). So the slider can also be used as a crossmix fader.

Two common channels can be operated uni- or bipolar. The voltage ranges are 0..+10V or +/- 5V.

The output sockets are located on an extra 4HP panel for mounting at any place (with approx. 40cm long connection cable). This way several modules can be mounted seamlessly next to each other.

HP : 18
Read more
MRP:$189.71 SAVE 17%
 2 in stock $158.08
Click for better price!
or call +44 20 7424 1960
quote 781481
Cat: 780450 Rel: 23 Jun 20 • View all Synth modules
 
Series module
Notes: Erica Syths Black VC EG Expander takes the Black VC EG to the next level - it outputs gates or CVs for each active stage of the envelope so you can design some really advanced patches. Inverted and bipolar envelope outputs are also available.

Erica Black series are high-end modules with unique functionality. Only the highest quality components are used and all inputs and outputs are protected against undesired overvoltage. When designing the Black Series, we did not economise on the module width, we put design and usability first. Big knobs are assigned to functions that make difference in sound. Together the Erica Black series are a range of modules that make an entire synthesizer.

NB: This expander module can be connected only to the Black VC EG. It will not work as a standalone eurorack module.
Read more
MRP:$126.06 SAVE 54%
 1 in stock $58.24
Click for better price!
or call +44 20 7424 1960
quote 780450
Cat: 780451 Rel: 23 Jun 20 • View all Synth modules
 
Series module
Notes: The Erica Black CV Expander is the satellite module to our HADSR envelope generator, it allows each envelope parameter to be controlled via external control voltage CV.

With this module you get unpredictable, complex envelopes that are ideal for random drones. It is internally patched to the Black Envelope generator via a ribbon cable, supplied with the module.

Erica Black series are high-end modules with unique functionality. Only the highest quality components are used and all inputs and outputs are protected against undesired overvoltage. When designing the Black Series, design and usability were the hghest priority. Big knobs are assigned to functions that make difference in sound. Together the Erica Black series are a range of modules that make an entire synthesizer.

Technical specifications:

CV Input signal level; -10V - +10V
Power consumption: +15mA, -15mA
Module width: 8HP
Module depth: 25mm
Read more
MRP:$119.82 SAVE 54%
 1 in stock $55.12
Click for better price!
or call +44 20 7424 1960
quote 780451
Items 1 to 13 of 13 on page 1 of 1

Filter

This Week: Studio Equipment
Close