安全购物

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

安全购物

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Today: Studio Equipment

首页  Today  

Studio Equipment

Options
Items 1 to 11 of 11 on page 1 of 1
Monday 13 July 2020
EBS
Cat: 783270 Rel: 13 Jul 20 • View all MIDI cables & adapters
 
MIDI cable
Notes: The BlueDot MIDI cables are a unique design that allows for flexible angle of the contact that is desirable when space is limited.

Flip the angle of the contact 90 degrees either way or leave it straight. A blue bracket attaches the cable to the angled positions with a click.

The flat cable design fit within the EBS unmatched space-saving accessories program.

Flexible contact angle.

Flat cable design.
Read more
 1 in stock $8.39
Cat: 781291 Rel: 13 Jul 20 • View all Studio accessories
 
Colour-coded rings for RØDECaster Pro microphone channels
Notes: The XLR-ID is a set of eight colour-coded rings that can be affixed to any XLR plug to assist with cable identification. The colours of the rings match the colours used for each of the microphone channels on the RØDECaster Pro.
Read more
MRP:$15.11 SAVE 18%
 1 in stock $12.33
Cat: 781299 Rel: 13 Jul 20 • View all Audio adapters
 
Headphone adapters for RØDECaster Pro
Notes: The HJA-4 is a pack of four high-quality adaptors for converting headphones with 3.5mm plugs (as used on most consumer devices) for use with equipment that has the larger 1/4" headphone sockets. They are particularly suitable for connecting headphones to the RODECaster Pro and the AI-1.

Dimensions (mm):
45mm W x 10mm H x 10mm D (each)
Read more
MRP:$15.11 SAVE 18%
 1 in stock $12.33
Cat: 781493 Rel: 13 Jul 20 • View all Studio monitors
 
2 way active monitor
Notes: Experience the true sound of your mix with the astonishing performance and versatility of the 8040B.

Active Crossovers

Directivity Control Waveguide (DCW) Technology

SPL

105 dB

Frequency Response

41 Hz - 21 kHz (-6dB)

Dimensions

H 365 x W 237 x D 223 mm, with Iso-Pod (view in inches)

Pristine performance
The choice of recording professionals the world over, the 8040B's pristine performance extends to an SPL of 105 dB and reaches right down to 41 Hz. This is a nearfield monitor that can provide truthfulness and energy in equal measures.

Speed and accuracy
The 8040B's recycled aluminium cabinet design combines transparent, uncoloured audio quality with a unique aesthetic beauty. You'll work with speed and accuracy, producing mixes that translate beautifully. And when you've finished, our Intelligent Signal Sensing (ISS) circuitry will automatically switch the 8040B into a green, power-saving standby mode.

Key Technologies

Active Crossovers

Directivity Control Waveguide (DCW) Technology

Intelligent Signal Sensing (ISS) Technology

Iso-Pod Stand

Minimum Diffraction Enclosure (MDE™) Technology

Optimized Amplifiers

Protection Circuitry

Reflex Port Design

Room Response Compensation

Versatile Mountings

Package contains:
1 x 8040B Studio monitor
1 x Operating manual
1 x Mains cable 1,8 m

Technical Specifications

SPL
105 dB

Amplifier Power
90 W Bass (Class AB) + 90 W Treble (Class AB)

Frequency Response
41 Hz - 21 kHz (-6 dB)

Accuracy of Frequency Response
i 2 dB (48 Hz - 20 kHz)

Driver Dimensions
165 mm Bass + 19 mm Treble (view in inches)

Dimensions
H 365 x W 237 x D 223 mm, with Iso-Pod (view in inches)

Weight
9.4 kg / 20.7 lb

Connections
1 x XLR Analog Input
Read more
MRP:$1,195.27 SAVE 21%
 2 in stock $942.52
Click for better price!
or call +44 20 7424 1960
quote 781493
Cat: 781279 Rel: 13 Jul 20 • View all 音响线材和电源适配器
 
TRRS to TRRS cable for RØDECaster Pro
Notes: The SC9 is a high quality 3.5mm TRRS to TRRS cable designed to connect a wide range of audio devices. At 1.5 metres long, it is particularly suitable for connecting a smartphone to the RODECaster Pro Podcast Production Studio.

Output: 3.5mm TRRS
Input: 3.5mm TRRS
Length: 1.5m
Read more
MRP:$31.49 SAVE 12%
 1 in stock $27.56
Cat: 782282 Rel: 13 Jul 20 • View all Synth modules
 
Snare drum module
Notes: Seismograf is a PIC based drum module featuring coding by Jetroid. There is currently a choice of two PICs which may be used with Seismograf, 'BD' and 'SD'. As you might expect, BD contains a range of 8 bass drums, while SD contains a range 8 of snare drums. The drum sounds are 10 bit encodings of some of Frequency Central's favourite electronic kits from yesteryear. It is not possible for the user to load their own sounds onto Seismograf PICs, but there is a chance that we may release alternative drum sets as the years roll (!) by.

Select
This knob is used to select one of the 8 sounds to be triggered. It has a CV input associated with it, and when a jack is inserted into the CV input, the knob is used to attenuate the incoming control voltage. This CV input responds to 0V to 5V signals.

Tune
This knob may be used to detune the drum sound either upwards or downwards. It has a CV input associated with it, and when a jack is inserted into the CV input, the knob is used to attenuate the incoming control voltage. This CV input responds to 0V to 5V signals.

Distort
This knob may be used to introduce either one of two different types of distortion to your chosen drum sound. When set to the mid position (12 o'clock) no distortion is present. Turning the knob anti-clockwise will cause the sound to be progressively clipped harder, while turning the knob clockwise will cause the sound to be progressively more bitcrushed. This knob has a CV input associated with it, and when a jack is inserted into the CV input, the knob is used to attenuate the incoming control voltage. This CV input responds to 0V to 5V signals.

Secret Sauce
Try running the sawtooth output of an audio rate VCO into Seismograf's trigger input, then wiggle the Tune knob manually, or apply a control voltage to the Tune input. Seismograf acts almost like a fliter, and perhaps more akin to oscillator sync. As the incoming trigger is so fast, Seismograf only gets to play the initial part of it's waveform, less on high notes, more on low notes. Additionally, there is naturally higher frequency content the higher the note and so forth. Whatever's going on, it sounds awesome. More than just a drum module, right?
Read more
MRP:$151.14 SAVE 23%
 1 in stock $116.49
Click for better price!
or call +44 20 7424 1960
quote 782282
Cat: 782279 Rel: 13 Jul 20 • View all Synth modules
 
Bass drum module
Notes: Seismograf is a PIC based drum module featuring coding by Jetroid. There is currently a choice of two PICs which may be used with Seismograf, 'BD' and 'SD'. As you might expect, BD contains a range of 8 bass drums, while SD contains a range 8 of snare drums. The drum sounds are 10 bit encodings of some of our Frequency Central's favourite electronic kits from yesteryear. It is not possible for the user to load their own sounds onto Seismograf PICs, but there is a chance that we may release alternative drum sets as the years roll (!) by.

Select
This knob is used to select one of the 8 sounds to be triggered. It has a CV input associated with it, and when a jack is inserted into the CV input, the knob is used to attenuate the incoming control voltage. This CV input responds to 0V to 5V signals.

Tune
This knob may be used to detune the drum sound either upwards or downwards. It has a CV input associated with it, and when a jack is inserted into the CV input, the knob is used to attenuate the incoming control voltage. This CV input responds to 0V to 5V signals.

Distort
This knob may be used to introduce either one of two different types of distortion to your chosen drum sound. When set to the mid position (12 o'clock) no distortion is present. Turning the knob anti-clockwise will cause the sound to be progressively clipped harder, while turning the knob clockwise will cause the sound to be progressively more bitcrushed. This knob has a CV input associated with it, and when a jack is inserted into the CV input, the knob is used to attenuate the incoming control voltage. This CV input responds to 0V to 5V signals.

Secret Sauce
Try running the sawtooth output of an audio rate VCO into Seismograf's trigger input, then wiggle the Tune knob manually, or apply a control voltage to the Tune input. Seismograf almost acts like a filter, probably more akin to oscillator sync. As the incoming trigger is so fast, Seismograf only gets to play the initial part of it's waveform, less on high notes, more on low notes. Additionally, there is naturally higher frequency content the higher the note and so forth. Whatever's going on, it sounds freaking awesome. More than just a drum module, right?

Depth: 35mm
Width: 4HP
12V draw: 30mA
-12V draw: 2mA
5V draw: 0mA
Read more
MRP:$151.14 SAVE 23%
 1 in stock $116.49
Click for better price!
or call +44 20 7424 1960
quote 782279
2hp
Cat: 766649 Rel: 13 Jul 20 • View all Synth modules
 
Compressor module
Notes: Compressor with side chain functionality.
Read more
MRP:$154.92 SAVE 17%
 2 in stock $129.09
Click for better price!
or call +44 20 7424 1960
quote 766649
2hp
Cat: 766648 Rel: 13 Jul 20 • View all Synth modules
 
Compressor module
Notes: Compressor with side chain functionality.
Read more
MRP:$154.92 SAVE 17%
 2 in stock $129.09
Click for better price!
or call +44 20 7424 1960
quote 766648
Cat: 782283 Rel: 13 Jul 20 • View all Synth modules
 
DSP effects module
Notes: Stasis Leak is a 6HP 48kHz DSP effects module, providing a choice of stereo chorus, stereo plate reverb and tap tempo delay. Stasis Leak is based around a Belton ABE-FX sub board, which in turn is based around a Coolaudio V1000 chip.

Time control
This knob controls a different function for each of the three effects (see chart at bottom). It is also associated with its own CV input, and when a jack is inserted into the CV input, the knob serves to attenuate incoming control voltages. This CV input responds to 0V to 5V signals.

Density control
This knob controls a different function for each of the three effects (see chart at bottom). It is also associated with its own CV input, and when a jack is inserted into the CV input, the knob serves to attenuate incoming control voltages. This CV input responds to 0V to 5V signals.

Tone control
This knob works on each of the three different effects as a simple lowpass filter, cutting the highs in the effected signal, and helping to provide definition between the dry and wet signal.

Wet control
This knob controls the amount of effected signal that is mixed with the dry signal. Dry is always 100%. On the rear of the module there is a Dry Lift jumper, this can come in useful when Stasis Leak is used in a send/return effects loop.

Tap/Sync In
These functions only apply to the delay effect, where they may be used to set the delay time, either manually, or via an incoming clock.

Left Out/Right Out
These two outputs may be used in conjuction for full stereo outputs of the chorus and reverb effects. The delay effect is mono, and either of the outputs may be used. For best results when using the chorus in a mono signal path, the left and right signals, which are 90o out of phase with each other, should be combined using a small mixer such and Process 26 or Volts Platz.

Depth: 35mm
12V draw: 96mA
Width: 6HP
-12V draw: 14mA
5V draw: 0mA
Read more
MRP:$211.60 SAVE 31%
 1 in stock $145.89
Cat: 782271 Rel: 13 Jul 20 • View all Synth modules
 
Synthesiser module
Notes: 20HP hardwired synth voice for fast set up times, with a decidedly East Coast feel.

Monograf is a fixed signal path monophonic synth voice with many unique features, including a number of patch points for flexibilty within a modular setting. Our aim was to design the simplest full featured and good sounding single VCO synth within as small a space as possible, while offering a broad sonic palette and fast setup times. Monograf includes the following elements:

Onboard LFO for PWM, and onboard sub osc for thick and juicy synth lines

Super stable AS3340 based VCO featuring sawtooth, triangle and square waveforms, as well as rotary switch control of octaves and an onboard LFO for PWM. Features highly accurate 1V/octave tracking, as well as extenal CV control of linear FM.

Sub oscillator featuring -1 octave and -2 octave square waveforms. Add a big bottom to your sound.

5 toggle switches for fast waveform selection, allows for super quick changes. Additionally, the triangle waveform is routed directly to the VCA, bypassing the VCF, to maintain a rumbling low end with higher resonance settings, this is a little known modular trick which was practised by the ancients.

12dB/octave OTA lowpass VCF based upon ARP Odyssey Mk1 'whiteface'. A very characterful VCF with cutting resonance whose audio inputs can be driven into clipping via a dedicated Drive control. The chosen level of drive can have a profound effect over the character of the filter, and heavy drive will saturate the input while simultaneously reducing resonance. Cutoff frequency can be controlled manually, from the LFO, from the ADSR, normalised from a 1V/oct source, or from an external CV.

Vintage ARP style VCA with gated/ADSR/drone options via two toggle switches.

AS3310 based ADSR for super snappy envelopes. CV control of envelope output is available for velocity controlled dynamics etc.

5V draw: 0mA
Depth: 35mm
Width: 20HP
12V draw: 38mA
-12V draw: 34mA
Read more
MRP:$332.51 SAVE 23%
 1 in stock $257.14
Click for better price!
or call +44 20 7424 1960
quote 782271
Items 1 to 11 of 11 on page 1 of 1

Filter

Today: Studio Equipment
Close